[SOLVED] NVidia GT240 HDMI Audio and ALSA

I have an NVidia GT240 video card with HDMI out and I cannot for the life of me get the audio working through it!
I've installed the drivers for NVidia (I've managed to load up XBMC and the video works beautifully) but when loading ALSA (aplay -l) there are no devices listed! I've disabled my onboard audio outputs just to avoid conflicts, aplay -l used to output my onboard realtek devices.
I'm not sure why the devices aren't listed anywhere, either in "aplay -l" or "aplay -L".
I'm looking to see if there's a config file somewhere where I would need to declare the device or something? The device shows up as an HD Audio Controller in lspci.
Last edited by nerditup (2010-06-14 19:20:59)

Hey Nerditup,
I managed to get my card working. Here is the thread http://bbs.archlinux.org/viewtopic.php?id=90350. Mine is the last post. Basically I had to manually build the Alsa-driver package which contains the kernel modules. No patches need or anything. I just downloaded the latest package from the Alsa site and extracted it, did a cofigure, make, make install and followed the rest of the steps posted at the start of the thread(the sound.conf file) and it worked. It would not work at all with the stock Arch package.
Hope that helps and ask if you need some more help...
Kevin

Similar Messages

  • [SOLVED]HDMI audio and gnome volume applet issues

    Hi all,
    After setting up Arch without too many problems came the real pain in the ass: HDMI audio over a Asus NVIDIA GeForce EN210....
    Eventually I got everything to work with the help of the ASLA en Pulse wiki pages, but I found the last piece of the puzzle here:
    http://wiki.xbmc.org/index.php?title=HO … ,_or_GT240
    Maybe this is useful for others too.
    The only problem I have now is that the ALSA deamon fails to load. I found this in the boot log file (/var/log/boot):
    Thu Apr 12 13:54:19 2012: :: Restoring ALSA Levels    [BUSY] Found hardware: "HDA-Intel" "Nvidia GPU 0b HDMI/DP" "HDA:10de000b,10de0101,00100200" "0x1043" "0x8343"
    Thu Apr 12 13:54:20 2012: Hardware is initialized using a generic method
    Does this mean I don't need the alsa deamon anymore? Sound still works normally after boot but a strange thing is that I can turn up and down the volume with the gnome shell volume applet but the volume of media applications like vlc do not react. Same problem with flash video's like youtube. I do hear the "blip" sound from the applet.
    Does anyone have ideas how to fix this?
    Last edited by Jurry (2012-04-26 23:46:31)

    yeah have the samre problem, adjusting sound in Amarok doesn't change anything.... happened after the last udev update, here is my bootup log :
    Sat Apr 14 17:28:55 2012: :: Adjusting system time and setting kernel timezone    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Starting UDev Daemon    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Triggering UDev uevents    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Loading User-specified Modules    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Waiting for UDev uevents to be processed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Bringing up loopback interface    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Unlocking encrypted volumes:    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Checking Filesystems    [BUSY] /dev/sda1: clean, 29/40160 files, 24631/160616 blocks
    Sat Apr 14 17:28:55 2012: /dev/sda4: clean, 76872/18530304 files, 16371381/74101820 blocks
    Sat Apr 14 17:28:55 2012:    [DONE]
    Sat Apr 14 17:28:55 2012: :: Remounting Root    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Mounting Local Filesystems    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Activating Swap    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Configuring Time Zone    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Initializing Random Seed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Removing Leftover Files    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Setting Hostname: Nashed    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Setting Consoles to UTF-8 mode    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Loading Keyboard Map: us    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Saving dmesg Log    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: INIT: Entering runlevel: 5
    Sat Apr 14 17:28:55 2012: :: Starting Syslog-NG    [BUSY]    [DONE]
    Sat Apr 14 17:28:55 2012: :: Starting Network    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Starting net-profiles    [BKGD]
    Sat Apr 14 17:29:26 2012: :: Mounting Network Filesystems    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Starting crond daemon    [BUSY]    [DONE]
    Sat Apr 14 17:29:26 2012: :: Restoring ALSA Levels    [BUSY] Found hardware: "HDA-Intel" "Realtek ALC888" "HDA:10ec0888,80860024,00100202" "0x8086" "0x0024"
    Sat Apr 14 17:29:26 2012: Hardware is initialized using a generic method
    Sat Apr 14 17:29:26 2012:    [FAIL]
    Sat Apr 14 17:29:26 2012: :: Starting D-BUS system messagebus    [BUSY]    [DONE]
    I hope it helps identify the problem

  • [Solved] Issue setting HDMI audio to default

    Hoping I'm not overlooking something very simple here.
    I have a Radeon HD4650 in my HTPC which I'm trying to run the audio through the HDMI output. I've set the kernel parameter "radeon.audio=1" and am able to hear sound through HDMI when I specify it manually within each application (for example XBMC or VLC going to Audio->Audio Device->HD-Audio Generic, HDMI 0 HDMI Audio Output).
    From there I tried to set the HDMI audio as default by following the wiki here:
    https://wiki.archlinux.org/index.php/Al … sound_card
    And here:
    https://wiki.archlinux.org/index.php/Al … s_not_work
    I've tried several combinations within my .asoundrc and asound.conf including:
    pcm.!default {
    type plug
    slave.pcm {
    @func getenv
    vars [ ALSAPCM ]
    default "hw:0,3"
    defaults.pcm.card 0
    defaults.pcm.device 3
    defaults.ctl.card 0
    pcm.!default "plughw:0,3"
    ctl.!default "plughw:0,3"
    pcm.dmixer {
    type dmix
    ipc_key 2048
    slave {
    pcm "hw:0,3"
    period_size 512
    buffer_size 4096
    rate 48000
    format S16_LE
    bindings {
    0 0
    1 1
    pcm.!default {
    type plug
    slave.pcm dmixer
    pcm:iec958 {
    type plug
    slave.pcm dmixer
    pcm.!default {
    type plug
    slave {
    pcm "hw:0,3"
    ctl.!default {
    type hw
    card 0
    Most of these I just copied from the wiki or various forum posts I found and edited the proper device in. These appear to work, as the HDMI card shows up as default in alsamixer (I've made sure everything is unmuted here), but selecting the default channel in VLC still results in no sound, not even from the built in audio (I can change the output to the HDMI option and it works fine).
    I've also tried this which results in no sound:
    aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Is there something I'm missing here?
    Here's my aplay -l:
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    A quick note here: I set this option in /etc/modprobe.d/:
    options snd_hda_intel index=-2
    This moved the HDMI card up to device 0 instead of 1. I've tried everything above as well with plughw:1,3 when that was the HDMI device.
    aplay -L:
    null
    Discard all samples (playback) or generate zero samples (capture)
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    sysdefault:CARD=Intel
    HDA Intel, ALC1200 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
    lsmod | grep snd:
    snd_hda_codec_hdmi 29701 1
    snd_hda_codec_realtek 35517 1
    snd_hda_intel 35309 0
    snd_hda_codec 147474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6332 1 snd_hda_codec
    snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    snd 58950 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5418 1 snd
    amixer -c 0:
    Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013
    [ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee6ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ee70000-0x000000007eecbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007eecc000-0x000000007fdf4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fdf5000-0x000000007fe00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007fe01000-0x000000007fe97fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fe98000-0x000000007fee7fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007fee8000-0x000000007feebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007feec000-0x000000007fef0fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007fef1000-0x000000007fef1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fef2000-0x000000007fefefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
    [ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ee6ffff]
    [ 0.000000] [mem 0x7c000000-0x7edfffff] page 2M
    [ 0.000000] [mem 0x7ee00000-0x7ee6ffff] page 4k
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7eecc000-0x7f9fffff]
    [ 0.000000] [mem 0x7eecc000-0x7effffff] page 4k
    [ 0.000000] [mem 0x7f000000-0x7f9fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdf4fff]
    [ 0.000000] [mem 0x7fc00000-0x7fdf4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] [mem 0x7fe01000-0x7fe97fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] [mem 0x7fee8000-0x7feebfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] [mem 0x7fef1000-0x7fef1fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] [mem 0x7feff000-0x7fefffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7e79a000-0x7ee6efff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
    [ 0.000000] ACPI: RSDT 000000007fefd038 0004C (v01 INTEL ECG3510M 00000076 01000013)
    [ 0.000000] ACPI: FACP 000000007fefc000 00074 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000007fef6000 05BEB (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000007fe98000 00040
    [ 0.000000] ACPI: APIC 000000007fef5000 00078 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 000000007fef4000 00040 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000007fef3000 0003C (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: ASF! 000000007fef2000 000A6 (v32 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007fef0000 0020C (v01 INTEL CpuPm 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feef000 001B7 (v01 INTEL Cpu0Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feee000 001B7 (v01 INTEL Cpu1Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feed000 001B7 (v01 INTEL Cpu2Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feec000 001B7 (v01 INTEL Cpu3Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    [ 0.000000] NODE_DATA [mem 0x7fe93000-0x7fe97fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c600000-ffff88007e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7ee6ffff]
    [ 0.000000] node 0: [mem 0x7eecc000-0x7fdf4fff]
    [ 0.000000] node 0: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] node 0: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] node 0: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] node 0: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] On node 0 totalpages: 523716
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3982 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8124 pages used for memmap
    [ 0.000000] DMA32 zone: 519734 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000007ee70000 - 000000007eecc000
    [ 0.000000] PM: Registered nosave memory: 000000007fdf5000 - 000000007fe01000
    [ 0.000000] PM: Registered nosave memory: 000000007fe98000 - 000000007fee8000
    [ 0.000000] PM: Registered nosave memory: 000000007feec000 - 000000007fef1000
    [ 0.000000] PM: Registered nosave memory: 000000007fef2000 - 000000007feff000
    [ 0.000000] e820: [mem 0x80000000-0xffefffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86144 r8192 d24448 u524288
    [ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515507
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2042856k/2096128k available (4920k kernel code, 1264k absent, 52008k reserved, 4046k data, 1124k init)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2188.974 MHz processor
    [ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 4379.36 BogoMIPS (lpj=7296580)
    [ 0.006675] pid_max: default: 32768 minimum: 301
    [ 0.006714] Security Framework initialized
    [ 0.006729] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006937] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008033] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.008556] Mount-cache hash table entries: 256
    [ 0.008842] Initializing cgroup subsys memory
    [ 0.008862] Initializing cgroup subsys devices
    [ 0.008864] Initializing cgroup subsys freezer
    [ 0.008866] Initializing cgroup subsys net_cls
    [ 0.008868] Initializing cgroup subsys blkio
    [ 0.008905] CPU: Physical Processor ID: 0
    [ 0.008907] CPU: Processor Core ID: 0
    [ 0.008910] mce: CPU supports 6 MCE banks
    [ 0.008918] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.009009] Freeing SMP alternatives: 20k freed
    [ 0.010372] ACPI: Core revision 20130328
    [ 0.013611] ACPI: All ACPI Tables successfully acquired
    [ 0.014894] ftrace: allocating 19564 entries in 77 pages
    [ 0.020479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055426] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.056666] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.056666] ... version: 2
    [ 0.056666] ... bit width: 40
    [ 0.056666] ... generic registers: 2
    [ 0.056666] ... value mask: 000000ffffffffff
    [ 0.056666] ... max period: 000000007fffffff
    [ 0.056666] ... fixed-purpose events: 3
    [ 0.056666] ... event mask: 0000000700000003
    [ 0.090007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.076769] smpboot: Booting Node 0, Processors #1
    [ 0.090021] Brought up 2 CPUs
    [ 0.090024] smpboot: Total of 2 processors activated (8759.72 BogoMIPS)
    [ 0.091305] devtmpfs: initialized
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7ee70000-0x7eecbfff] (376832 bytes)
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7fe98000-0x7fee7fff] (327680 bytes)
    [ 0.091305] RTC time: 21:34:09, date: 08/06/13
    [ 0.091305] NET: Registered protocol family 16
    [ 0.091305] ACPI: bus type PCI registered
    [ 0.091305] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.091305] PCI: not using MMCONFIG
    [ 0.091305] PCI: Using configuration type 1 for base access
    [ 0.093396] bio: create slab <bio-0> at 0
    [ 0.093411] ACPI: Added _OSI(Module Device)
    [ 0.093411] ACPI: Added _OSI(Processor Device)
    [ 0.093411] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.093411] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.094284] ACPI: EC: Look up EC in DSDT
    [ 0.097855] ACPI: Interpreter enabled
    [ 0.097864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.097879] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.097881] ACPI: Using IOAPIC for interrupt routing
    [ 0.097896] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.098027] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
    [ 0.115962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.116042] ACPI: No dock devices found.
    [ 0.121485] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.122691] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
    [ 0.122777] PCI host bridge to bus 0000:00
    [ 0.122781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.122783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.122786] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.122788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.122791] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
    [ 0.122793] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
    [ 0.122795] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [ 0.122806] pci 0000:00:00.0: [8086:2980] type 00 class 0x060000
    [ 0.122920] pci 0000:00:01.0: [8086:2981] type 01 class 0x060400
    [ 0.122965] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.122994] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.123063] pci 0000:00:19.0: [8086:104b] type 00 class 0x020000
    [ 0.123081] pci 0000:00:19.0: reg 10: [mem 0x90b00000-0x90b1ffff]
    [ 0.123089] pci 0000:00:19.0: reg 14: [mem 0x90b24000-0x90b24fff]
    [ 0.123098] pci 0000:00:19.0: reg 18: [io 0x30c0-0x30df]
    [ 0.123156] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.123180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.123224] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.123264] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.123345] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.123387] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.123427] pci 0000:00:1a.1: reg 20: [io 0x3080-0x309f]
    [ 0.123507] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.123560] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.123579] pci 0000:00:1a.7: reg 10: [mem 0x90b25400-0x90b257ff]
    [ 0.123661] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.123725] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.123775] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.123790] pci 0000:00:1b.0: reg 10: [mem 0x90b20000-0x90b23fff 64bit]
    [ 0.123859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.123926] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.123974] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.124043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.124074] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.124118] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.124188] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.124220] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.124264] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.124333] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.124366] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.124414] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.124454] pci 0000:00:1d.0: reg 20: [io 0x3060-0x307f]
    [ 0.124522] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.124567] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.124607] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f]
    [ 0.124675] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.124717] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.124757] pci 0000:00:1d.2: reg 20: [io 0x3020-0x303f]
    [ 0.124827] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.124880] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.124899] pci 0000:00:1d.7: reg 10: [mem 0x90b25000-0x90b253ff]
    [ 0.124981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.125043] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.125088] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.125156] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.125205] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
    [ 0.125284] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.125289] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    [ 0.125293] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    [ 0.125376] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
    [ 0.125390] pci 0000:00:1f.2: reg 10: [io 0x3438-0x343f]
    [ 0.125399] pci 0000:00:1f.2: reg 14: [io 0x344c-0x344f]
    [ 0.125407] pci 0000:00:1f.2: reg 18: [io 0x3430-0x3437]
    [ 0.125415] pci 0000:00:1f.2: reg 1c: [io 0x3448-0x344b]
    [ 0.125423] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f]
    [ 0.125432] pci 0000:00:1f.2: reg 24: [io 0x3400-0x340f]
    [ 0.125461] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.125543] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.125555] pci 0000:00:1f.3: reg 10: [mem 0x90b25800-0x90b258ff]
    [ 0.125582] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.125683] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
    [ 0.125697] pci 0000:00:1f.5: reg 10: [io 0x3428-0x342f]
    [ 0.125706] pci 0000:00:1f.5: reg 14: [io 0x3444-0x3447]
    [ 0.125714] pci 0000:00:1f.5: reg 18: [io 0x3420-0x3427]
    [ 0.125722] pci 0000:00:1f.5: reg 1c: [io 0x3440-0x3443]
    [ 0.125730] pci 0000:00:1f.5: reg 20: [io 0x30f0-0x30ff]
    [ 0.125739] pci 0000:00:1f.5: reg 24: [io 0x30e0-0x30ef]
    [ 0.125768] pci 0000:00:1f.5: PME# supported from D3hot
    [ 0.125901] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
    [ 0.125917] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.125930] pci 0000:01:00.0: reg 18: [mem 0x90a00000-0x90a1ffff 64bit]
    [ 0.125939] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
    [ 0.125954] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.125992] pci 0000:01:00.0: supports D1 D2
    [ 0.126044] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
    [ 0.126060] pci 0000:01:00.1: reg 10: [mem 0x90a20000-0x90a23fff 64bit]
    [ 0.126130] pci 0000:01:00.1: supports D1 D2
    [ 0.126194] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.126198] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.126201] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.126206] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.126282] pci 0000:02:00.0: [1106:3432] type 00 class 0x0c0330
    [ 0.126300] pci 0000:02:00.0: reg 10: [mem 0x90900000-0x90900fff]
    [ 0.126416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.130024] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.130034] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.130126] pci 0000:03:00.0: [1131:7164] type 00 class 0x048000
    [ 0.130153] pci 0000:03:00.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.130174] pci 0000:03:00.0: reg 18: [mem 0x90400000-0x907fffff 64bit]
    [ 0.130281] pci 0000:03:00.0: supports D1 D2
    [ 0.130283] pci 0000:03:00.0: PME# supported from D0 D1 D2
    [ 0.136688] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.136698] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.136792] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
    [ 0.136823] pci 0000:04:00.0: reg 10: [io 0x1018-0x101f]
    [ 0.136837] pci 0000:04:00.0: reg 14: [io 0x1024-0x1027]
    [ 0.136851] pci 0000:04:00.0: reg 18: [io 0x1010-0x1017]
    [ 0.136866] pci 0000:04:00.0: reg 1c: [io 0x1020-0x1023]
    [ 0.136880] pci 0000:04:00.0: reg 20: [io 0x1000-0x100f]
    [ 0.136906] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.137025] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.137035] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.137039] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.137098] pci 0000:05:03.0: [1814:0301] type 00 class 0x028000
    [ 0.137116] pci 0000:05:03.0: reg 10: [mem 0x90800000-0x90807fff]
    [ 0.137237] pci 0000:05:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.137254] pci 0000:05:05.0: reg 10: [mem 0x90808000-0x90808fff]
    [ 0.137329] pci 0000:05:05.0: supports D1 D2
    [ 0.137331] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.137409] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
    [ 0.137415] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.137421] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.137423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.137426] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.137428] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
    [ 0.137431] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
    [ 0.137433] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [ 0.137455] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.137457] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.137544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137753] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.137887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.138021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.138507] ACPI: Enabled 4 GPEs in block 00 to 1F
    [ 0.138515] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.138552] Found 1 acpi root devices
    [ 0.138645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.138645] vgaarb: loaded
    [ 0.138645] vgaarb: bridge control possible 0000:01:00.0
    [ 0.138645] PCI: Using ACPI for IRQ routing
    [ 0.141702] PCI: pci_cache_line_size set to 64 bytes
    [ 0.141771] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
    [ 0.141774] e820: reserve RAM buffer [mem 0x7ee70000-0x7fffffff]
    [ 0.141776] e820: reserve RAM buffer [mem 0x7fdf5000-0x7fffffff]
    [ 0.141778] e820: reserve RAM buffer [mem 0x7fe98000-0x7fffffff]
    [ 0.141780] e820: reserve RAM buffer [mem 0x7feec000-0x7fffffff]
    [ 0.141782] e820: reserve RAM buffer [mem 0x7fef2000-0x7fffffff]
    [ 0.141784] e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    [ 0.141898] NetLabel: Initializing
    [ 0.141900] NetLabel: domain hash size = 128
    [ 0.141901] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.141917] NetLabel: unlabeled traffic allowed by default
    [ 0.141945] Switching to clocksource refined-jiffies
    [ 0.148603] pnp: PnP ACPI init
    [ 0.148630] ACPI: bus type PNP registered
    [ 0.148744] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
    [ 0.148747] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.148750] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.148753] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.148756] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.148758] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.148761] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.148764] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
    [ 0.148767] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
    [ 0.148769] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.148774] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.148919] pnp 00:01: [dma 4]
    [ 0.148948] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.148992] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.149031] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.149063] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.149126] system 00:05: [io 0x0500-0x053f] has been reserved
    [ 0.149129] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.149132] system 00:05: [io 0x0360-0x0361] has been reserved
    [ 0.149135] system 00:05: [io 0x0680-0x06ff] has been reserved
    [ 0.149139] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149220] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149501] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.149573] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.149624] pnp: PnP ACPI: found 9 devices
    [ 0.149626] ACPI: bus type PNP unregistered
    [ 0.156213] Switching to clocksource acpi_pm
    [ 0.156232] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.156236] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.156264] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.156267] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.156276] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.156279] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.156288] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
    [ 0.156291] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
    [ 0.156304] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156307] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156310] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.156313] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.156315] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156318] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156324] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156327] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156330] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
    [ 0.156334] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf88fffff pref]
    [ 0.156337] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.156340] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.156344] pci 0000:01:00.0: BAR 6: assigned [mem 0x90a40000-0x90a5ffff pref]
    [ 0.156348] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.156351] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.156355] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.156358] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156363] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.156366] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.156371] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.156375] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156381] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.156384] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.156389] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.156393] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156400] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8600000-0xf860ffff pref]
    [ 0.156402] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.156405] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.156410] pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff]
    [ 0.156414] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf88fffff pref]
    [ 0.156421] pci 0000:00:1e.0: PCI bridge to [bus 05]
    [ 0.156425] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.156425] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.156425] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.156425] pci_bus 0000:01: resource 1 [mem 0x90a00000-0x90afffff]
    [ 0.156425] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156425] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.156425] pci_bus 0000:02: resource 1 [mem 0x90900000-0x909fffff]
    [ 0.156425] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156425] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.156425] pci_bus 0000:03: resource 1 [mem 0x90000000-0x907fffff]
    [ 0.156425] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156425] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.156425] pci_bus 0000:04: resource 1 [mem 0xf8400000-0xf85fffff]
    [ 0.156425] pci_bus 0000:04: resource 2 [mem 0xf8600000-0xf88fffff pref]
    [ 0.156425] pci_bus 0000:05: resource 1 [mem 0x90800000-0x908fffff]
    [ 0.156425] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] NET: Registered protocol family 2
    [ 0.156425] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.156425] TCP: reno registered
    [ 0.156425] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] NET: Registered protocol family 1
    [ 0.156791] pci 0000:01:00.0: Boot video device
    [ 0.156891] PCI: CLS 64 bytes, default 64
    [ 0.156941] Unpacking initramfs...
    [ 0.310182] Freeing initrd memory: 6996k freed
    [ 0.313496] Scanning for low memory corruption every 60 seconds
    [ 0.313787] audit: initializing netlink socket (disabled)
    [ 0.313804] type=2000 audit(1375824849.313:1): initialized
    [ 0.326819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.328674] VFS: Disk quotas dquot_6.5.2
    [ 0.328731] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.328948] msgmni has been set to 4003
    [ 0.329231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.329273] io scheduler noop registered
    [ 0.329276] io scheduler deadline registered
    [ 0.329310] io scheduler cfq registered (default)
    [ 0.329439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.329503] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.329571] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.329644] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.329814] intel_idle: does not run on family 6 model 15
    [ 0.329849] GHES: HEST is not enabled!
    [ 0.329917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.350447] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.350819] Linux agpgart interface v0.103
    [ 0.350895] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.353919] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.353952] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.354077] mousedev: PS/2 mouse device common for all mice
    [ 0.354143] rtc_cmos 00:02: RTC can wake from S4
    [ 0.354275] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.354297] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
    [ 0.354307] cpuidle: using governor ladder
    [ 0.354309] cpuidle: using governor menu
    [ 0.354362] drop_monitor: Initializing network drop monitor service
    [ 0.354438] TCP: cubic registered
    [ 0.354554] NET: Registered protocol family 10
    [ 0.354764] NET: Registered protocol family 17
    [ 0.354780] Key type dns_resolver registered
    [ 0.355037] PM: Checking hibernation image partition /dev/system/swap
    [ 0.397240] PM: Hibernation image not present or could not be loaded.
    [ 0.397253] registered taskstats version 1
    [ 0.397804] Magic number: 9:719:600
    [ 0.397885] rtc_cmos 00:02: setting system clock to 2013-08-06 21:34:10 UTC (1375824850)
    [ 0.398920] Freeing unused kernel memory: 1124k freed
    [ 0.399295] Write protecting the kernel read-only data: 8192k
    [ 0.402578] Freeing unused kernel memory: 1212k freed
    [ 0.404163] Freeing unused kernel memory: 408k freed
    [ 0.412320] systemd-udevd[45]: starting version 204
    [ 0.417813] [drm] Initialized drm 1.1.0 20060810
    [ 0.423117] [drm] radeon kernel modesetting enabled.
    [ 0.423539] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE180).
    [ 0.423580] [drm] register mmio base: 0x90A00000
    [ 0.423582] [drm] register mmio size: 131072
    [ 0.424493] ATOM BIOS: CAICOS
    [ 0.424939] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 0.424942] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [ 0.425844] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 0.425848] [drm] RAM width 64bits DDR
    [ 0.425929] [TTM] Zone kernel: Available graphics memory: 1026308 kiB
    [ 0.425931] [TTM] Initializing pool allocator
    [ 0.425937] [TTM] Initializing DMA pool allocator
    [ 0.425964] [drm] radeon: 512M of VRAM memory ready
    [ 0.425966] [drm] radeon: 512M of GTT memory ready.
    [ 0.426256] radeon 0000:01:00.0: ffff88007e85a800 unpin not necessary
    [ 0.881477] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90008be6118
    [ 0.881489] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 0.882702] [drm] Loading CAICOS Microcode
    [ 0.901197] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 0.901323] radeon 0000:01:00.0: WB enabled
    [ 0.901327] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880079fd2c00
    [ 0.901330] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880079fd2c0c
    [ 0.903890] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc90009432118
    [ 0.903895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.903897] [drm] Driver supports precise vblank timestamp query.
    [ 0.903924] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 0.903940] radeon 0000:01:00.0: radeon: using MSI.
    [ 0.903977] [drm] radeon: irq initialized.
    [ 0.920415] [drm] ring test on 0 succeeded in 2 usecs
    [ 0.920480] [drm] ring test on 3 succeeded in 1 usecs
    [ 1.106683] [drm] ring test on 5 succeeded in 2 usecs
    [ 1.106688] [drm] UVD initialized successfully.
    [ 1.106780] [drm] Enabling audio support
    [ 1.106827] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 1.106873] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 1.259354] [drm] ib test on ring 5 succeeded
    [ 1.259721] [drm] Radeon Display Connectors
    [ 1.259723] [drm] Connector 0:
    [ 1.259725] [drm] HDMI-A-1
    [ 1.259726] [drm] HPD2
    [ 1.259729] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 1.259730] [drm] Encoders:
    [ 1.259732] [drm] DFP1: INTERNAL_UNIPHY1
    [ 1.259733] [drm] Connector 1:
    [ 1.259734] [drm] VGA-1
    [ 1.259736] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 1.259738] [drm] Encoders:
    [ 1.259739] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.259818] [drm] Internal thermal controller with fan control
    [ 1.260722] [drm] radeon: power management initialized
    [ 1.313356] tsc: Refined TSC clocksource calibration: 2188.999 MHz
    [ 1.313363] Switching to clocksource tsc
    [ 1.331618] [drm] fb mappable at 0x80375000
    [ 1.331620] [drm] vram apper at 0x80000000
    [ 1.331622] [drm] size 8294400
    [ 1.331623] [drm] fb depth is 24
    [ 1.331625] [drm] pitch is 7680
    [ 1.331702] fbcon: radeondrmfb (fb0) is primary device
    [ 1.544648] Console: switching to colour frame buffer device 240x67
    [ 1.550480] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.550482] radeon 0000:01:00.0: registered panic notifier
    [ 1.550488] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
    [ 1.551576] device-mapper: uevent: version 1.0.3
    [ 1.551788] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
    [ 1.584940] SCSI subsystem initialized
    [ 1.587002] ACPI: bus type ATA registered
    [ 1.587124] ACPI: bus type USB registered
    [ 1.587165] usbcore: registered new interface driver usbfs
    [ 1.587199] libata version 3.00 loaded.
    [ 1.587772] ata_piix 0000:00:1f.2: version 2.13
    [ 1.587914] ata_piix 0000:00:1f.2: MAP [
    [ 1.587916] P0 P2 P1 P3 ]
    [ 1.590067] usbcore: registered new interface driver hub
    [ 1.590515] usbcore: registered new device driver usb
    [ 1.591219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.591393] ehci-pci: EHCI PCI platform driver
    [ 1.592276] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592288] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
    [ 1.592501] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 1.592673] xHCI xhci_add_endpoint called for root hub
    [ 1.592675] xHCI xhci_check_bandwidth called for root hub
    [ 1.592706] hub 1-0:1.0: USB hub found
    [ 1.592713] hub 1-0:1.0: 1 port detected
    [ 1.592813] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592819] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
    [ 1.592917] xHCI xhci_add_endpoint called for root hub
    [ 1.592919] xHCI xhci_check_bandwidth called for root hub
    [ 1.592948] hub 2-0:1.0: USB hub found
    [ 1.592957] hub 2-0:1.0: 4 ports detected
    [ 1.593131] scsi0 : pata_jmicron
    [ 1.593158] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.593424] scsi1 : pata_jmicron
    [ 1.593609] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
    [ 1.593612] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18
    [ 1.596715] firewire_ohci 0000:05:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x80
    [ 1.740079] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.740483] scsi2 : ata_piix
    [ 1.740779] scsi3 : ata_piix
    [ 1.741044] ata3: SATA max UDMA/133 cmd 0x3438 ctl 0x344c bmdma 0x3410 irq 19
    [ 1.741049] ata4: SATA max UDMA/133 cmd 0x3430 ctl 0x3448 bmdma 0x3418 irq 19
    [ 1.741248] ata_piix 0000:00:1f.5: MAP [
    [ 1.741250] P0 -- P1 -- ]
    [ 1.741284] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 1.741526] scsi4 : ata_piix
    [ 1.741784] scsi5 : ata_piix
    [ 1.742032] ata5: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19
    [ 1.742036] ata6: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19
    [ 1.742228] ehci-pci 0000:00:1a.7: setting latency timer to 64
    [ 1.742244] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 1.742252] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    [ 1.742266] ehci-pci 0000:00:1a.7: debug port 1
    [ 1.746161] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.746168] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90b25400
    [ 1.753360] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.753568] hub 3-0:1.0: USB hub found
    [ 1.753573] hub 3-0:1.0: 4 ports detected
    [ 1.753841] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.753845] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.753852] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
    [ 1.753886] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 1.754034] hub 4-0:1.0: USB hub found
    [ 1.754039] hub 4-0:1.0: 2 ports detected
    [ 1.754278] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.754282] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.754288] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
    [ 1.754321] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
    [ 1.754470] hub 5-0:1.0: USB hub found
    [ 1.754475] hub 5-0:1.0: 2 ports detected
    [ 1.754707] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.754711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.754717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.754748] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
    [ 1.754886] hub 6-0:1.0: USB hub found
    [ 1.754890] hub 6-0:1.0: 2 ports detected
    [ 1.755113] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.755117] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.755123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.755146] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
    [ 1.755279] hub 7-0:1.0: USB hub found
    [ 1.755284] hub 7-0:1.0: 2 ports detected
    [ 1.755501] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.755505] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.755511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.755533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
    [ 1.755672] hub 8-0:1.0: USB hub found
    [ 1.755677] hub 8-0:1.0: 2 ports detected
    [ 1.756794] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 1.757624] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 1.757636] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
    [ 1.757651] ehci-pci 0000:00:1d.7: debug port 1
    [ 1.761541] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.761550] ehci-pci 0000:00:1d.7: irq 23, io mem 0x90b25000
    [ 1.770027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.770236] hub 9-0:1.0: USB hub found
    [ 1.770242] hub 9-0:1.0: 6 ports detected
    [ 1.793425] hub 6-0:1.0: USB hub found
    [ 1.793434] hub 6-0:1.0: 2 ports detected
    [ 1.816762] hub 7-0:1.0: USB hub found
    [ 1.816772] hub 7-0:1.0: 2 ports detected
    [ 1.840122] hub 8-0:1.0: USB hub found
    [ 1.840131] hub 8-0:1.0: 2 ports detected
    [ 1.896698] usb 1-1: new high-speed USB device number 2 using xhci_hcd
    [ 1.911468] hub 1-1:1.0: USB hub found
    [ 1.911627] hub 1-1:1.0: 4 ports detected
    [ 2.064043] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.074751] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.096814] firewire_core 0000:05:05.0: created device fw0: GUID 009027000228f4cc, S400
    [ 2.520099] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.520116] ata4.01: SATA link down (SStatus 4 SControl 300)
    [ 2.520129] ata4.01: link offline, clearing class 3 to NONE
    [ 2.526834] ata4.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100
    [ 2.540115] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.540132] ata3.01: SATA link down (SStatus 4 SControl 300)
    [ 2.540234] ata4.00: configured for UDMA/100
    [ 2.547003] ata3.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
    [ 2.547008] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.560344] ata3.00: configured for UDMA/133
    [ 2.560526] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    [ 2.562299] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5
    [ 2.565388] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.565443] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.565446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.565469] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.569249] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.569254] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.569537] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.582466] sda: sda1 sda2
    [ 2.582770] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.763375] usb 6-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.186725] usb 7-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.373997] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.384911] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
    [ 3.384942] usbcore: registered new interface driver usbhid
    [ 3.384944] usbhid: USB HID core driver
    [ 3.389375] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input0
    [ 3.389518] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1d.1-1:1
    [ 3.956744] usb 8-1: new low-speed USB device number 2 using uhci_hcd
    [ 4.193021] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
    [ 4.193111] hid-generic 0003:05A4:9881.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1d.2-1/input0
    [ 4.323187] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
    [ 4.323310] hid-generic 0003:05A4:9881.0006: input,hidraw3: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1d.2-1/input1
    [ 11.876733] bio: create slab <bio-1> at 1
    [ 12.881119] bio: create slab <bio-1> at 1
    [ 13.707370] PM: Starting manual resume from disk
    [ 13.707375] PM: Hibernation image partition 254:2 present
    [ 13.707377] PM: Looking for hibernation image.
    [ 13.707685] PM: Image not found (code -22)
    [ 13.707689] PM: Hibernation image not present or could not be loaded.
    [ 14.046090] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 14.787445] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 14.788676] systemd[1]: Set hostname to <HTPC-Arch>.
    [ 15.226797] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 15.226858] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 15.226873] systemd[1]: Starting Remote File Systems.
    [ 15.227011] systemd[1]: Reached target Remote File Systems.
    [ 15.227023] systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
    [ 15.227118] systemd[1]: Starting Delayed Shutdown Socket.
    [ 15.227240] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 15.227251] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 15.227365] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 15.227375] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 15.227491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 15.227501] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 15.227623] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 15.227662] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 15.227875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 15.227893] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 15.227935] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 15.227945] systemd[1]: Starting Paths.
    [ 15.228037] systemd[1]: Reached target Paths.
    [ 15.228050] systemd[1]: Starting Journal Socket.
    [ 15.228187] systemd[1]: Listening on Journal Socket.
    [ 15.249416] systemd[1]: Started Set Up Additional Binary Formats.
    [ 15.262084] systemd[1]: Starting Apply Kernel Variables...
    [ 15.262799] systemd[1]: Starting Create static device nodes in /dev...
    [ 15.263427] systemd[1]: Mounting Huge Pages File System...
    [ 15.263983] systemd[1]: Starting Setup Virtual Console...
    [ 15.264564] systemd[1]: Mounting POSIX Message Queue File System...
    [ 15.265156] systemd[1]: Mounting Debug File System...
    [ 15.280316] systemd[1]: Started Load Kernel Modules.
    [ 15.280348] systemd[1]: Mounting Configuration File System...
    [ 15.280921] systemd[1]: Mounted FUSE Control File System.
    [ 15.280939] systemd[1]: Starting Journal Service...
    [ 15.281676] systemd[1]: Started Journal Service.
    [ 15.281761] systemd[1]: Starting udev Kernel Socket.
    [ 15.281891] systemd[1]: Listening on udev Kernel Socket.
    [ 15.281945] systemd[1]: Starting udev Control Socket.
    [ 15.282059] systemd[1]: Listening on udev Control Socket.
    [ 15.282117] systemd[1]: Starting udev Coldplug all Devices...
    [ 15.282675] systemd[1]: Starting Encrypted Volumes.
    [ 15.282783] systemd[1]: Reached target Encrypted Volumes.
    [ 15.282802] systemd[1]: Expecting device dev-disk-by\x2duuid-0318dc88\x2d9059\x2d4a62\x2dbcff\x2d33265de192a4.device...
    [ 15.282920] systemd[1]: Started File System Check on Root Device.
    [ 15.282933] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 15.283591] systemd[1]: Mounting Temporary Directory...
    [ 15.420998] systemd[1]: Expecting device dev-disk-by\x2duuid-53882be2\x2d6e5d\x2d4f81\x2d8336\x2d8115b139229a.device...
    [ 15.422283] systemd[1]: Expecting device dev-disk-by\x2duuid-a510d99d\x2dd043\x2d415c\x2d9357\x2d87584ac75ce0.device...
    [ 15.753587] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 15.847848] systemd-udevd[185]: starting version 204
    [ 16.644359] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 16.644369] ACPI: Sleep Button [SLPB]
    [ 16.644450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 16.644454] ACPI: Power Button [PWRF]
    [ 16.751410] pps_core: LinuxPPS API ver. 1 registered
    [ 16.751415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 16.808340] media: Linux media interface: v0.10
    [ 16.812148] Linux video capture interface: v2.00
    [ 16.820027] PTP clock support registered
    [ 16.833228] ACPI: Requesting acpi_cpufreq
    [ 16.874833] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 16.874837] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 16.875034] e1000e 0000:00:19.0: setting latency timer to 64
    [ 16.875118] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 16.875143] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 16.914814] saa7164 driver loaded
    [ 16.916507] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
    [ 16.916513] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0x90000000
    [ 17.050022] saa7164_downloadfirmware() no first image
    [ 17.050682] cfg80211: Calling CRDA to update world regulatory domain
    [ 17.051569] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
    [ 17.187584] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:78:69:22
    [ 17.187590] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 17.187615] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
    [ 17.187944] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20130328/utaddress-251)
    [ 17.187951] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 17.187976] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 17.448874] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
    [ 17.481174] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 17.580464] saa7164_downloadfirmware() firmware read 4019072 bytes.
    [ 17.580469] saa7164_downloadfirmware() firmware loaded.
    [ 17.580471] Firmware file header part 1:
    [ 17.580473] .FirmwareSize = 0x0
    [ 17.580474] .BSLSize = 0x0
    [ 17.580475] .Reserved = 0x3d538
    [ 17.580477] .Version = 0x3
    [ 17.580479] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
    [ 17.580485] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
    [ 17.580486] saa7164_downloadfirmware() BSLSize = 0x0
    [ 17.580488] saa7164_downloadfirmware() Reserved = 0x0
    [ 17.580489] saa7164_downloadfirmware() Version = 0x1661c00
    [ 17.621991] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 17.694365] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
    [ 17.694422] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
    [ 17.694477] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
    [ 17.694908] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 17.694980] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
    [ 17.707929] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 17.907140] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907184] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907251] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 17.993729] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
    [ 18.040563] coretemp coretemp.0: Using relative temperature scale!
    [ 18.040576] coretemp coretemp.0: Using relative temperature scale!
    [ 18.100383] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [ 18.112063] iTCO_vendor_support: vendor-support=0
    [ 18.298748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 18.298795] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
    [ 18.298917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 18.520198] systemd-udevd[206]: renamed network interface wlan0 to wlp5s3
    [ 18.624855] Adding 10485756k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:10485756k FS
    [ 18.730190] systemd-udevd[200]: renamed network interface eth0 to enp0s25
    [ 20.673933] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 20.681617] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 20.855405] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 21.795385] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896764] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896898] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [ 22.415792] systemd-logind[284]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 22.415885] systemd-logind[284]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 22.618057] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input9
    [ 22.619178] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input10
    [ 24.390026] saa7164_downloadimage() Image downloaded, booting...
    [ 24.493363] saa7164_downloadimage() Image booted successfully.
    [ 24.493397] starting firmware download(2)
    [ 26.916146] systemd-logind[284]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
    [ 27.103368] saa7164_downloadimage() Image downloaded, booting...
    [ 29.170040] saa7164_downloadimage() Image booted successfully.
    [ 29.170074] firmware download complete.
    [ 29.217377] tveeprom 9-0000: Hauppauge model 88061, rev C4F2, serial# 8524019
    [ 29.217381] tveeprom 9-0000: MAC address is 00:0d:fe:82:10:f3
    [ 29.217383] tveeprom 9-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
    [ 29.217386] tveeprom 9-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
    [ 29.217388] tveeprom 9-0000: audio processor is SAA7164 (idx 43)
    [ 29.217390] tveeprom 9-0000: decoder processor is SAA7164 (idx 40)
    [ 29.217392] tveeprom 9-0000: has radio, has IR receiver, has no IR transmitter
    [ 29.217394] saa7164[0]: Hauppauge eeprom: model=88061
    [ 29.865010] tda18271 10-0060: creating new instance
    [ 29.869343] TDA18271HD/C2 detected @ 10-0060
    [ 30.094538] DVB: registering new adapter (saa7164)
    [ 30.094548] saa7164 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 30.383509] tda18271 11-0060: creating new instance
    [ 30.387943] TDA18271HD/C2 detected @ 11-0060
    [ 30.457571] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 30.457682] e1000e 0000:00:19.0 enp0s25: Link Speed was downgraded by SmartSpeed
    [ 30.457685] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
    [ 30.457715] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
    [ 30.612017] tda18271: performing RF tracking filter calibration
    [ 32.898604] tda18271: RF tracking filter calibration complete
    [ 32.901771] DVB: registering new adapter (saa7164)
    [ 32.901779] saa7164 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 32.902195] saa7164[0]: registered device video0 [mpeg]
    [ 33.133183] saa7164[0]: registered device video1 [mpeg]
    [ 33.343857] saa7164[0]: registered device vbi0 [vbi]
    [ 33.343959] saa7164[0]: registered device vbi1 [vbi]
    [ 37.832133] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 38.787420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=0
    [ 39.333649] EXT4-fs (dm-3): re-mounted.

    I seemed to have solved this by following the advice in the Gentoo wiki:
    https://wiki.gentoo.org/wiki/Radeon#Audio_over_HDMI
    pcm.!default {
    type plug
    slave.pcm "hdmi"
    Those four lines in my /etc/asound.conf work. I'm not sure what the difference is between specifying "hdmi" vs the hardware device "hw:0,3".
    I still get no sound with `aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav` however, `aplay /usr/share/sounds/alsa/Front_Center.wav` works now. `aplay -D hdmi /usr/share/sounds/alsa/Front_Center.wav` results in an error/warning:
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    aplay: set_params:1239: Channels count non available

  • Not working:HDMI Audio and Enlightenment17

    Hi
    Been searching hard to get my new install up and humming.  A couple of problems are hounding me.  I would be very grateful for help.
    Audio via an HDMI cable out of a little Sony TV I am using as a monitor is not working.  Alsamixer shows two SPDIF outputs both unmuted showing 00.
    lsmod | grep '^snd' | column -t
    snd_hda_codec 147506 0
    snd_hwdep 6332 1 snd_hda_codec
    snd_pcm 77765 1 snd_hda_codec
    snd_page_alloc 7234 1 snd_pcm
    snd_timer 18718 1 snd_pcm
    snd 58950 4 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec
    Secondly:
    I am using LKDM.  Launching Enlightenment 17 worked initially but after I went through the setup steps it sent me back to LKDM.  If I login as root and launch Enlightenment it flashes the 'almost there' screen from the end of the setup and then sends me back to LKDM.  If I login as a user it just blinks and stays on LKDM.  LKDE works flawlessly (except for the fact that my user desktop background will go back to default after I log out and back in, the background for root stays put and does not disappear after logging out and back in)
    I absolutely adore the Arch Linux wiki and followed the install instructions for Arch Linux/LKDM/LKDE/Enlightenment closely, I just need to get these last issues solved so I can happily grind Stata all day.
    Thanks for this great community
    Last edited by TlfT (2013-08-27 23:05:45)

    Enlightenment17 does not work again today, but it is not an issue as I think I prefer LXDE anyway.
    As per audio, tried installing the official realtek driver for linux from their site, but it seemingly just made things worse.  Even after using make uninstall in the directory I installed from I cannot launch alsamixer: "cannot open mixer: No such file or directory". I tried installing OSS, following the wiki's instructions but got the following when I ran "soundon"
    cc1: some warnings being treated as errors
    make[2]: *** [/usr/lib/oss/build/osscore.o] Error 1
    make[1]: *** [_module_/usr/lib/oss/build] Error 2
    make[1]: Leaving directory `/usr/src/linux-3.10.9-1-ARCH'
    make: *** [default] Error 2
    Relinking the OSS kernel modules failed
    uninstalled OSS and unistalled alsa-lib, alsa-tools and alsa utils. Reinstalled alsa lib, tools and utils and still no luck.
    Tried just about every solution that is posted and made my problem worse.  Is there a way to 'refresh' the arch specific kernel without having to do a completely new install?  I tried pacman -S linux and it worked but did not bring back alsamixer functionality.
    Also, anyone have any inkling as to why google-chrome or chromium will not lauch after being installed from the aur and package database?
    Otherwise I am getting very good performance from my hardware in the programs I use.
    Last edited by TlfT (2013-08-27 23:09:42)

  • HDMI audio and video problems on new DV6t se

    Just received my HP Dv6t laptop and i immediately upgraded to Windows 7 ultimate. I am facing two problems,
    Firstly, if i disconnect and reconnect the HDMI cable the sound only comes from the speakers and not the monitor (works fine with my HP HDX16t laptop using the same hardware). I set the HDMI sound to default when the HDMI cable was connected to my monitor. But when i tried to do the same thing when its disconnected i dont see the HDMI option (i already ticked the "Show disabled/disconnected devices" tab).
    Secondly, i use an ASUS monitor for work purposes and a SONY TV to watch movies. When i connect the HDMI cable to the SONY TV it underscans the image and i have to readjust it to fit the TV. Similarly if i re-adjust the image and connect the HDMI cable back to my ASUS monitor it overscans the image (because that's how i had it on the TV) and i have to fit it again. This wasn't a problem with my HP HDX16t laptop (again using the same hardware)
    Any help??

    Hi,
    This issue happens most probably due to Corrupted Video Card Drivers.
    Right click on Desktop, click Screen Resolution, set the Screen Resolution Slider to Maximum, click Apply/Ok.
    Check if you are able to play Videos fine. If it does not work.
    1. Click Start, type: DEVMGMT.MSC in Search Field and Press Enter. It opens Device Maanger Window.
    2. Go to 'Display Adapters' category, and expand it. Right click on Display Driver entry, and click uninstall.
    3. Click Start->All Programs->Recovery Manager->Click Hardware Driver installation.
    Select Video Card Driver entry, and click Install.
    Restart the PC, and check of the issue has fixed.
    Thank You.
    Kiran Talluri
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

  • Need full resolution HDMI audio and 2 CH optical simultaneously

    Am working on an install for a customer who has a Mac Mini.  He is running XBMC for all his movies.  I need to run HDMI to his surround processor with full resolution audio while running the optical out in 2 channel pcm for his whole house audio.  Is this possible?

    As standard sound would go to one or the other output, it is possible to configure things to send sound to both at the same time, but I would strongly expect this would require both to be configured the same i.e. stereo, rather than one being stereo and the other 5.1.
    To configure the Mac to send to both you need to use the Audio MIDI Setup tool in the Utilities folder.
    See https://support.apple.com/kb/PH5178?locale=en_US
    and How to combine multiple audio interfaces by creating an aggregate device - Apple Support
    It maybe that the easiest or more practical option would be to use an AV Receiver set to output via both its stereo and HDMI ports. The Mac would then just send via HDMI to the AV Receiver which would if needed handle the conversion and splitting of the signal.

  • ALL DRIVER LIKE GRAPHIC,AMD HDMI AUDIO,AND LAN DRIVER

    Dear Sir,
                   Hi,
    There is problem in my Laptop HP PAVILION G4  (Windows 7 Ultimate) 32 Bit OS LAN DRIVER AND AMD HDMI OUTPUT DRIVER IS NOT WORKING.WHICH CUSED MY FARNESS FROM INTERNET & MUSIC.
    SO PLZ HELP ME TO GIVING ME I'S DRIVERS.............

    Hello Rahul1818,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    There are a variety of HP Pavilion g4 Notebooks and because of that I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number.
    How Do I Find My Model Number or Product Number?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HDMI audio and Audio Out mutally exclusive now?

    Hello,
    I have a 2010 MBP and use an external display via HDMI as well as external speakers via the headphone jack. This worked just fine until a recent update. After a recent update, when I have my display connected via HDMI the audio out no longer works.  While I am able to route sound to the display's speakers via the Sound Settings, I would much prefer to listen to sound via my Klipsch speaker system that is connected to the headphone jack.
    When I remove the HDMI connection, the speaker system works fine.  The moment it is plugged in, the sounds cuts out.  This used to work fine?
    Any body have any information on this? When I google search on this issue, all I see are people having trouble routing sound via HDMI - which is basically the opposite of my current problem.  It appears as though audio is know mutally exclusive -> it can only be routed to HDMI if its connected.  If it is not connected, then headphone jack works fine.
    Thanks for your time.

    when you did your update, it probably routed your audio through you HDMI cable which is it's main purpose since most people who coneects via HDMI doesn't hook anything to the source.
    try hooking up your speakers to your display's headphone jack if you have one.
    other than that, i don't know what else to tell you.
    good luck...

  • [SOLVED] HDMI audio not working (worked in Ubuntu)

    hi there,
    I have very new hardware (Intel Core i5 2500, using the internal GPU) and already knew that it would probably take me a while to get everything working (especially the GPU). I first tried Ubuntu 11.04 Alpha with the xorg-edgers ppa, which already supported the new GPU, including 3D acceleration... unfortunately, it made my X server crash about every 15 minutes. Having heard about ArchLinux before I thought I should give it a try. Turned out the packages that I need for my GPU are only available in testing (xf86-video-intel 2.14, Mesa 7.10, Kernel 2.6.37), so I'm running on the testing repository right now. But I gotta say that I'm pretty impressed by ArchLinux, Compiz is working perfectly smooth and the whole system feels way faster than Ubuntu.
    Now regarding my problem, I can't get my HDMI audio to work. Usually I would have said to myself "well, ALSA doesn't support it yet, I guess I'm gonna have to wait" . But the reason I'm writing this thread anyway is that it was working fine in Ubuntu 11.04 Alpha. In Ubuntu, I could use the alsa device hdmi:CARD=PCH,DEV=2 for HDMI audio. The strange thing is, this device doesn't exist on my ArchLinux system. Here is my "aplay -L" output.
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    In Ubuntu, I also had hdmi:CARD=PCH,DEV=1 and hdmi:CARD=PCH,DEV=2. So my question is, why are those missing on my system? Kernel and ALSA are the same version (2.6.37 / 1.0.23)!? I also already downloaded a Daily Snapshot of ALSA and did a ./configure, make, sudo make install - still no luck. And btw, DEV=0 outputs sound through my default speakers...
    cat /proc/asound/pcm
    00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
    00-01: ALC892 Digital : ALC892 Digital : playback 1
    00-03: HDMI 0 : HDMI 0 : playback 1
    00-07: HDMI 1 : HDMI 1 : playback 1
    00-08: HDMI 2 : HDMI 2 : playback 1
    cat /proc/asound/cards
    0 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xfe620000 irq 51
    any help would be appreciated..
    ...and really thanks to the whole community, my system is stable as never before and the ArchLinux Wiki is probaby the first Linux Wiki that actually helped me solve my problems.
    Last edited by 65kid (2011-01-27 18:05:09)

    Nevermind, I fixed it myself. ;)
    cat /proc/asound/pcm
    00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
    00-01: ALC892 Digital : ALC892 Digital : playback 1
    00-03: HDMI 0 : HDMI 0 : playback 1
    00-07: HDMI 1 : HDMI 1 : playback 1
    00-08: HDMI 2 : HDMI 2 : playback 1
    00-08 is the missing device I was talking about, aplay -L doesn't list it, but it's there. Anyway, I can use plughw:0,8 to use HDMI audio and it works fine, although I'm still confused about the difference betwenn plughw:x,x and hdmi:CARD=PCH,DEV=X...

  • HDMI Audio static FIOS TV only, not DVD or other audio

    My second Verizon FIOS set top box (STB) is connected to my home theater system via HDMI, so HDMI out on STB to HDMI in on the home theater box.
    When I watch a DVD, watch a movie on Netflix or listen to audio on Pandora, I have no audio issues. When I switch to Verizon FIOS the audio has a lot of static to the point where it is hard to recognize the voice. The bummer is that it used to work fine before. Video is fine, no issues.
    I have tried different HDMI cables, air blown all the ports so they are clean, made sure all connections are tight. The issue has not been resolved. There are no abnormal electricity sources nearby other than a wall plug. The STB sits on a wooden shelf and doesnt contact anything else that is metal. Can you help me figure out what the issue is and how to solve it?
    The audio and video on the main STB unit (which is also the DVR) is perfectly fine 
    Solved!
    Go to Solution.

    The dynamic range fixed it, thanks

  • Wanting sound quality closer to HD caliber. Using gigaworks. Just bought a vid card with hdmi audio

    I just got a GTX 560 TI, and my dilemma arose after installing this card and then trying out the HDMI audio, and being amazed at the sound quality I am NOT getting by simply using my sound card. Here are some of my specs which are relevant. I have the said video card, a Sound Blaster X-Fi XtremeGamer, a Samsung 40" LCD I use as a monitor, and an Asus P5N motherboard. Also, I am using Creative Gigaworks 7.1 750s speakers. I'm running a mini-hdmi to hdmi cable from my card to TV. Basically I am hearing sound quality from my TV that is absolutely superior to anything that has come out of my speakers and am now wanting to achieve better sound quality for my speakers, but how? Should I get a Sound Blaster X-Fi Titanium Fatal1ty? New speakers is definitely not what I am looking for right now, and besides that, they are a very powerful set of 7.1's that you just can't find anymore. I know there are HDMI sound cards, but I doubt I would be able to plug my speakers into those. Is there better software I can download to go along with my sound card? I've updated PowerDVD on the off-chance that it would help (even though I knew it wouldn't). I'm really not sure how much help getting a fatal1ty sound card would be. Any suggestions on how to get my PC speakers running up to or NEAR to HD quality?

    $200 at all? So no new sound card? Or 200 for receiver only? So following setups are possible using a receiver:
    - Use SB, Receiver: so you connect from SB analog to Receiver and from their analog to Speakers, use HDMI/DVI for video seperately. IMHO Bad as it uses much analog points and would have bad sound quality. As long as you don't buy a quality SB, real good analog cables, good receiver. And so we speek over 1000$
    - Use GPU and Receiver directly via HDMI. Then Analog to Speakers and HDMI/DVI to TV. No real extra SB needed, but be aware that if you got an nvidia card it may be you need to connect the sound via SPDIF - check: [url=http://www.hardwaresecrets.com/article/600/">http://www.hardwaresecrets.com/article/600/[/url] . But as SPDIF only provides 1,5Mbit/s (6Mbit/s in rare cases) and formats like Dolby True HD/Digital Plus, DTS HD Master need 18-25 Mbit/s you won't get highest quality possible as software downsamples quality. But i think anyway these formats are not supported by GPU, thats why 3rd solution exists
    - As written above use GPU to SB via HDMI, SB to Receiver via HDMI, Receiver to Speakers via Analog. Most expensive as you need new SB and Receiver but thats the way they want high end sound being provided.
    Keep in mind that on 2nd and 3rd solution the receiver must have HDMI I/O! Also check HDMI Version! 1.3/1.4? 7.1 is not nessacary (as your speakers can do 5.1 to 7.1 upmix [url=http://support.creative.com/Products/ProductDetails.aspx?catID=4&amp;subCatID=792&amp;p rodID=9306&amp;prodName=GigaWorks%20S750&amp;subCa tName=Multi-Channel%20Systems&amp;CatName=Speaker+Systems&amp; VARSET=prodfaq:PRODFAQ_9306,VARSET=CategoryID:4">h ttp://support.creative.com/Products/ProductDetails.aspx?catID=4&amp;subCatID=792&amp;p rodID=9306&amp;prodName=GigaWorks%20S750&amp;subCa tName=Multi-Channel%20Systems&amp;CatName=Speaker+Systems&amp; VARSET=prodfaq:PRODFAQ_9306,VARSET=CategoryID:4[/url] ) but you buy a receiver normally just once and so i would recommend to get that too. If you want a good one LipSync, Deep Color, x.v.Color should be onboard too.
    So on the second part - why do you think you have to buy new cables and sub? And did i get you right - you want to directly connect the speakers with receiver? No, you have to connect to a sub. Well, if you want the receiver to do the upmix you need the seperate available 4x Stereo or RCA cables as i don't think an receiver will provide 7.1 via the supplied 4x to 3x 7.1 Audio cable.

  • No HDMI Audio from PNY Nvidia G210 Card - Please Help [SOLVED]

    ***** It's now working! *****
    Thanks to some of the posts on the XBMC and Ubuntu hardware forums. I picked up a lot of pointers.
    When using this card with XBMC, There is no need at all for an /etc/modprobe.d/sound.conf with probe masks etc. and there is no need for a /etc/asound.conf either (if you are going to just use XBMC like me for your HTPC setup)
    All you need is ALSA 1.0.23 installed and at least be running kernel 2.6.34. aplay -l should reveal multiple (4) Nvidia devices as shown in my previous text further down this post, this is fine, however only 1 of these Nvidia devices will actually deliver sound to your TV via HDMI.
    In XBMC, goto System Settings, Audio Settings, set device to "Custom" and enter only ONE of the following and then try and play a movie or music in XBMC... (My G210 Nvidia soundcard is card 1 as I also have onboard audio at card 0 so bear this in mind when applying this method to your setup e.g if your HDMI soundcard is card 0 then the first thing to try is plughw:0,3)
    plughw:1,3
    plughw:1,7
    plughw:1,8
    plughw:1,9
    My PNY G210 card worked using a "Custom" device in XBMC of plughw:1,8
    If you are not using XBMC and are using for example a Gnome desktop then you can apparently get sound working by using the text in the code box below in your /etc/asound.conf (this will ensure alsa defaults to the correct card and sub device for hdmi audio) again ensure you are using the correct card number and device number. You can validate this by testing audio as follows from the command line "speaker-test -D plughw:1,8 -r 44100" and simply work your way through the 4 devices until you find the one that works.
    pcm.!default {
    type plug
    slave.pcm {
    type hw
    card 1
    device 8
    Given the amount of testing and reading I have done on this, I wouldn't be surprised if this method works for any G210 Nvidia cards and HDMI audio, as the logic seems sound (if you'll pardon the pun! :-))
    Hopefully someone will find this helpful.
    Original problem text below this point......
    Hi Guys,
    I am about to give up on this as I cannot get HDMI audio to my TV no matter what I try.
    The card is a PNY Nvidia G210. I am running Arch Linux x86_64 and ALSA 1.0.23 and Nvidia driver 256.33
    aplay -l shows
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
    Subdevices: 2/2
    Subdevice #0: subdevice #0
    Subdevice #1: subdevice #1
    card 0: Intel [HDA Intel], device 1: VT1708S Digital [VT1708S Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    dmesg shows the HDMI interface of the card being picked up
    HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
    HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
    HDMI: detected monitor SAMSUNG
    at connection type HDMI
    HDMI: available speakers: FL/FR
    HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20
    Everything for the Nvidia HDMI is un-muted in alsamixer.
    I've tried the tips from the wiki here in terms of probe masks added to sound.conf but still no joy. http://wiki.xbmc.org/?title=HOW-TO_set_ … ,_or_GT240
    I've also tried the tips from this post here and still no sound. https://bbs.archlinux.org/viewtopic.php?id=90350
    Disabling the motheroard onbonard Intel Audio makes no difference and manually compiling and installing the very latest ALSA driver makes no difference.
    Has anyone got HDMI audio working on this card under linux?
    Thanks in advance for any help you can offer as I have now run out of ideas and if I can't get this to work will have to revert back to my old ASUS EN9400GT card which takes s/pdif from the motherboard for audio out to HDMI.
    Last edited by adr3nal1n (2010-10-14 20:08:42)

    Works for me too! in my case it was plughw:0,7.
    Thank you ever so much!
    *hugs*

  • W540 + Dock station (40A20170EU), Audio and HDMI problems - SOLVED

    Hello,
    I have recently bought your dock station (40A20170EU) and as soon as I started using it the problems began:
     - Audio jack on the dock is not working and is emitting static.
     - As soon as I connect a display via HDMI port (on the dock station) my laptop display starts flickering (the display was tested on the PC and works).
    I have updated the dock firmware to 2.21.000, nothing changed. 
    PS. The second monitor running from the docking stations display port is working fine. 
    I need your help! 
    Thank you!

    SOLVED.
    1) Removed all display drivers.
    2) In BIOS I changed the display setting from standard to advanced.
    3) Reinstalled all the display drivers.
    4) Reconnect the HDMI monitor and now it’s working.
    5) WINNING J
    Thanks anyway.

  • HOW TO: HDMI Audio Output for Zotac Media Box with nVidia ION :)

    I've been fighting with my recently purchased Zotac mini-PC for about 2 months now trying to get the HDMI audio output to work. I tried extensive modifications of /etc/asound.conf, different versions of ALSA, and even OSS without success. I've finally succeeded using ALSA and GNOME.
    First I installed ALSA according to the Arch wiki.
    Next I verified that ALSA detected my sound card(s):
    cat /proc/asound/cards
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xfe9fc000 irq 28
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0xfcf7c000 irq 18
    Next I checked which sound card had the HDMI jack:
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    From these two commands, I concluded that I have 2 sound cards (important later on) and that my HDMI sound card was card 1 (NVidia) and that it had 4 possible devices (3,7,8, and 9). To determine which device must be used, I ran the following command for each device (for example, to test card X and device Y, use' plughw:X,Y'):
    aplay /usr/share/sounds/alsa/Front_Center.wav -D plughw:1,7
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    I tried each device and got the best sound from device 7 (8 and 9 also worked, device 3 gave static...).
    Now, since I had 2 sound cards, I needed to change the default ALSA device. My default ALSA device was card 0 (the Intel card), which wasn't plugged in, so I needed to change the default card to be card 1 (the HDMI card). After reading the ALSA FAQ, I found that modifying /usr/share/alsa.conf should work, though modifying /etc/asound.conf should have also worked. For whatever reason, I couldn't get my modifications to /etc/asound.conf to work, so I edited /usr/share/alsa/alsa.conf. In the  "# defaults" section I replaced the following:
    defaults.ctl.card NVidia
    defaults.pcm.card NVidia
    defaults.pcm.device 7
    I opted to use the key NVidia rather than the card number (1) since I've read in numerous places that the card index can change unexpectedly after a reboot/update. The key can be checked with cat /proc/asound/cards as shown above.
    After this, I reloaded ALSA (/etc/rc.d/alsa restart) and verified that the sound worked through the default channel:
    aplay /usr/share/sounds/alsa/Front_Center.wav -D default
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    Finally, I rebooted, chose the HDA NVidia (ALSA Mixer) option from gnome-volume-control, and loaded a movie in gnome-mplayer. I was pleased to hear crystal clear sound with functioning volume control
    I Hope this helps someone else, I found it very hard to piece together how to diagnose and resolve this problem. Here are some of the resources I found useful:
    Arch Wiki ALSA Page
    ALSA FAQ for how to change default sound card
    ALSA FAQ
    XBMC Troubleshooting for ION HDMI

    @sprince09 Can you hear sound through HDMI when you run aplay /usr/share/sounds/alsa/Front_Center.wav -D plughw:1,7 ?
    (8 and 9 also worked, device 3 gave static...)
    - what does it mean? How do you know that they are working?
    What options do you have for snd_hda_intel in /etc/modprobe.d/ ?  Can you play the following:
    mplayer -ao alsa:device=hw=1,7 file.wav
    BTW, can you hear sound form video files in xine? If yes, can you post your ~/.xine/config ?
    Last edited by knedlyk (2012-01-21 23:41:57)

  • [SOLVED] HDMI audio not working on new TV

    I got a new TV and I get no sound through HDMI from my arch htpc.
    However, I don't think the problem is the TV because:
    1) Audio from other hdmi sources works
    2) When i connect the htpc to a monitor through hdmi and restart, the audio works. While still on, if I disconnect the monitor and reconnect the TV, the audio works through hdmi
    It seems that the problem stems from auto-detection of the hdmi. I have also noticed that if i start the htpc unconnected to a display and then try to connect it after it has booted up, i get no video as well. Shouldnt hdmi cables be hot pluggable.
    Any way to write out the auto detected configuration for audio and disable detection? Something like this should solve my problem
    Edit: solution in post #5 bellow
    Last edited by despotic (2013-05-03 04:12:47)

    Solved by adding monitor's EDID in xorg.conf. The steps to fix with an nvidia card are:
    1) Connect device with which audio works (in my case the monitor)
    2) run nvidia-settings and get edid file for the monitor
    3) edit xorg.conf and add the following under the device section:
    Option "ConnectedMonitor" "DFP"
    Option "CustomEDID" "DFP-0:/etc/X11/monitor.edid"
    4) reboot or restart X
    Sound works now through hdmi connected to TV

Maybe you are looking for

  • How to make subview respond to touches?

    If I make a UIToolbar a direct subview of my ViewController.view, it responds to touches and buttons will call selector methods. Now let's say I have a subclass of UIView called myToolbarSubclass. I have instantiated a UIToolbar and made it a subview

  • Stor.e slim not recognized by Windows 8.1

    Hello, A Stor.e slim external HDD is not recognized in Windows 8.1 (no problems with Windows 7). When plugged in, it s shown as a non-recognized device. Driver is being sought, but not found.

  • Memory leak in RMI registry ? (JRE 1.3.1_11)

    Hello. I have a CLI that creates a server which calls some JNI to get objects for a flat file database and return them. Each time I run the CLI I create a new server and bind it the RMI registry. I created a script that excecutes the CLI in a forever

  • Why is my mac running slow after MOuntain Lion update??

    after i updated my Mac Book it starts to browse very slow..why????

  • Re: Freeze

    My intel based iMac (late 2007) has been crashing and/or freezing in the last few weeks.  I have cleared the Safari cache and deleted cookies from websites I did not recognize.  This problem is happening every day, at lease 2-3 times a day and mostly