[SOLVED] Nvidia problems after fixing glibc borkgasm... [SOLVED]

First -- Yes, I was an idiot and borked my system. I had been on vacation for a week and came to a mile long list of updates. I also went ahead and ran everything without looking for any relevant news bits on the home page.
Second -- I'm mostly certain that I've gotten that all straightened out.
However -- Ever since nothing installed from the nvidia-utils package will run.
hal@oa ~ > nvidia-settings
bash: /usr/bin/nvidia-settings: No such file or directory
hal@oa ~ > file /usr/bin/nvidia-settings
/usr/bin/nvidia-settings: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.4.0, stripped
hal@oa ~ > uname -m
x86_64
it does however work if i use
$ /lib/ld-linux-x86-64.so.2 /usr/bin/nvidia-settings
Andy ideas?
[SOLUTION]
I swear I had done it again already after fixing the /lib symlink, but for s/gs I ran one more pacman -Sy glibc lib32-glibc, and it seems to have gone through this time.
Pacman REALLY needs some form of news alert to let you know about updates like that. Nothing obtrusive, just a nice little reminder to check the homepage for notices. It would save me a _LOT_ of money on asprin.
Last edited by HalJordan (2012-07-16 02:34:28)

--Fixed the name.
--And that's the first thing I did. After running pacman -Rdd on anything nvidia, I ran pacman -Sy on everything removed. After that didn't fix it I came looking here, where I found the bit about the linker. It was frustrating as hell, I kept getting back "File or directory not found" but ls showed it right there.

Similar Messages

  • Help solve the problem after restor iphone 5 ios 7 asks email

    Help solve the problem after restor iphone 5 ios 7 asks apple ID
    I Forgot apple ID

    Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

  • [SOLVED] Stuck in fresh install: problems after succesfull glibc upgra

    Hello everyone. I am stuck in the installation after upgrading glibc.
    I am installing from the Core Image ISO.
    As it says in the Developer Wiki the first thing I did after installing the system is:
    $ pacman -U http://pkgbuild.com/~allan/glibc-2.16.0 … pkg.tar.xz
    In that moment appaered some errors related to tzselect and 2 other files which I dont remember but I deleted them and then it let me install.
    By doing that it let me upgrade pacman, so I upgraded pacman and created de signature database as it should be.
    Then I did a 'pacman -S filesystem --force' and 'rm /etc/profile.d/locale.sh' to solve future known errors related to system upgrade and rebooted.
    In that moment everything was OK, but then I tried 'pacman -Syu'
    Here's where I am stuck. Pacman says that /lib still exists on the filesystem.
    As it says on the developer wiki i tried 'find /lib -exec pacman -Qo -- {} +' to find out which packages where owing /lib and the list it displayed was HUGE, really...
    I removed the /lib/modules/3.0-ARCH since no other files where in that folder and tried again 'pacman -Syu' but keep getting the '/lib exists on filesystem' error.
    What should I do to solve this??
    The list of files in /lib is this:
    device-mapper            libcap.so.2                         libext2fs.so.2.4       libmount.so.1.1.0       libpam_misc.so         libshadow.so
    firmware                 libcap.so.2.22                      libgcrypt.so           libm.so.6               libpam_misc.so.0       libshadow.so.0
    initcpio                 libcidn-2.16.so                     libgcrypt.so.11        libncursesw.so.5        libpam_misc.so.0.82.0  libshadow.so.0.0.0
    ld-2.16.so               libcidn.so.1                        libgcrypt.so.11.7.0    libncursesw.so.5.9      libpam.so              libss.so.2
    ld-linux-x86-64.so.2     libcom_err.so.2                     libgpg-error.so        libnsl-2.16.so          libpam.so.0            libss.so.2.0
    libacl.so                libcom_err.so.2.1                   libgpg-error.so.0      libnsl.so.1             libpam.so.0.83.1       libsysfs.so.2
    libacl.so.1              libcrypt-2.16.so                    libgpg-error.so.0.8.0  libnss_compat-2.16.so   libpcprofile.so        libsysfs.so.2.0.1
    libacl.so.1.1.0          libcryptsetup.so                    libgudev-1.0.so.0      libnss_compat.so.2      libpcre.so.0           libthread_db-1.0.so
    libanl-2.16.so           libcryptsetup.so.1                  libgudev-1.0.so.0.1.0  libnss_db-2.16.so       libpcre.so.0.0.1       libthread_db.so.1
    libanl.so.1              libcryptsetup.so.1.2.0              libhandle.a            libnss_db.so.2          libpopt.so             libudev.so.0
    libattr.so               libcrypt.so.1                       libhandle.so           libnss_dns-2.16.so      libpopt.so.0           libudev.so.0.12.0
    libattr.so.1             libc.so.6                           libhandle.so.1         libnss_dns.so.2         libpopt.so.0.0.0       libutil-2.16.so
    libattr.so.1.1.0         libdevmapper-event-lvm2mirror.so    libhandle.so.1.0.3     libnss_files-2.16.so    libproc-3.2.8.so       libutil.so.1
    libblkid.so.1            libdevmapper-event-lvm2raid.so      libhistory.so          libnss_files.so.2       libpthread-2.16.so     libuuid.so.1
    libblkid.so.1.1.0        libdevmapper-event-lvm2snapshot.so  libhistory.so.6        libnss_hesiod-2.16.so   libpthread.so.0        libuuid.so.1.3.0
    libBrokenLocale-2.16.so  libdevmapper-event-lvm2.so.2.02     libhistory.so.6.2      libnss_hesiod.so.2      libreadline.so         modprobe.d
    libBrokenLocale.so.1     libdevmapper-event.so.1.02          libkeyutils.so.1       libnss_nis-2.16.so      libreadline.so.6       modules
    libbz2.so                libdevmapper.so.1.02                libkeyutils.so.1.4     libnss_nisplus-2.16.so  libreadline.so.6.2     security
    libbz2.so.1              libdl-2.16.so                       liblvm2app.so.2.2      libnss_nisplus.so.2     libresolv-2.16.so      systemd
    libbz2.so.1.0            libdl.so.2                          liblvm2cmd.so.2.02     libnss_nis.so.2         libresolv.so.2         udev
    libbz2.so.1.0.6          libe2p.so.2                         libm-2.16.so           libpamc.so              librt-2.16.so
    libc-2.16.so             libe2p.so.2.3                       libmemusage.so         libpamc.so.0            librt.so.1
    libcap.so                libext2fs.so.2                      libmount.so.1          libpamc.so.0.82.1       libSegFault.so
    Thanks everyone who will answer this post.
    Last edited by grego1422 (2012-07-16 19:35:16)

    It seems that deleting the folder inside /lib/modules broke something since the system was quite unstable after rebooting...
    Whatever, I'm sorry I can't continue to solve my last situation.
    I have just made a new install and followed the instructions at Allan McRae's blog.
    pacman -Sy
    rm -rf /var/run /var/lock && pacman -Sf filesystem
    pacman -S tzdata
    pacman -U http://pkgbuild.com/~allan/glibc-2.16.0 … pkg.tar.xz
    rm /etc/profile.d/locale.sh
    pacman -Su --ignore glibc
    pacman -Su
    I'm quite near the success, now I'm stuck at generating the signature database.
    Before the last 'pacman -Su' I'm forced to create the trusted signature database by pacman, when I run 'pacman-key --init' it seems to hang, I left it there generating the database for about half an hour in my first atempt and about an hour in my second atempt and it never finished. But in my previous installation (2 hours ago) it was done in 5 minutes.
    Is there another way to generate the signature database? or anyone knows what is happening? Thank you.
    Last edited by grego1422 (2012-07-16 16:27:55)

  • [SOLVED] Architecture problems after chroot fix

    I got the brilliant idea last night that systemd-sysvcompat was no longer needed on my system so I unistalled it. Turning on my computer did not go smootly this morning.
    I managed to fix the problem by booting a Linux Mint 64bit KDE USB I had lying around and from there I followed some chroot instructions to access my Arch setup and restore the deleted systemd-sysvcompat. While I was at it I also updated some programs. This was all done through pacman undir chroot.
    The problem I have now is that my system is 32 bit (i686) and I keep getting the error
    error: failed to prepare transaction (package architecture is not valid)
    :: package xxx-x86_64 does not have a valid architecture
    from pacman. If i add the --arch x86_64 flag pacman stops complaining and installs but I get the 64 bit version (as expected). The packages which I installed from my chroot session all turned out to be x86_64 versions. I have now restored them all to i686 by manually downloading and installing each package.
    I found some old posts on the same error from pacman but have not been able to fix the problem after reading them. I have f. ex. tried setting the arch flag in pacman.conf to i686 instead of auto without success.
    uname -m reports i686 as the architecture.
    Please advise me on what I can try to fix this problem and please forgive me if I've missed out some important log outputs or other information. I'll provide as needed.
    Last edited by Bangsadrengur (2013-05-23 13:56:47)

    This worked falconindy. Pacman is back to normal. Thank you (and you as well Scimmia) .

  • [SOLVED] Unexpected problems after installing systemd

    Hi there,
    Since I read that Arch is going to start using systemd I decided to install it. I followed the systemd wiki article (https://wiki.archlinux.org/index.php/Sy … g_to_start) and at first sight everything seemed OK and I didn't have much problems with it. My only serious problem was that the network-manager plasmoid in KDE was not working properly - it stated that Network Manager was not started. After searching the forums I found out that the problem was due to my pam login file for lightdm not configured properly and I managed to fix the problem. However after several days of use I found out the following additional problems:
    1. Removable drives not working - before usb flash drives and sd cards were automounted by KDE when i inserted them. Now nothing happens (I tested with a usb flash drive and an sd memory card).
    2. My laptop's touchpad feels very slugish and scroll is not working. After I tried to check the touchpad settings in the KDE control centre I found out while all the touchpad settings are present, they are greyed out and can't be changed.
    3. Sound is extremely choppy in wine games. In native linux games (Faster Than Light for example) it is OK. It is also OK in other native linux applications like clementine and mplayer. I am using pulseaudio which i've set up in accordance with the pulseaudio wiki article.
    I tried to recall any problems I may have had while setting up systemd and the onlything ordinary i can thing about was that when i tried to do "systemctl enable dbus.service" (because the systemd wiki article advised me to "systemctl enable" all daemons listed in my former rc.conf) I got the following output: "The unit files have no [Install] section. They are not meant to be enabled using systemctl.". On the other hand the dbus.service seems to be running just fine:
    "dbus.service                                 loaded active running       D-Bus System Message Bus"
    Has anyone encounter similar problems when using systemd?
    Best regards!
    Last edited by hellfire[bg] (2012-10-14 19:36:59)

    I had some time to tweak my system and i have an update on my problems - the 1st and 2nd problems were solved by reverting back to initscripts and setting up systemd again. I can swear i followed the same instructions (on the arch linux wiki page) as before but somehow after it did it those problems disappeared. I am now running a pure systemd system and everything appears to be OK. Regarding the 3rd problem it turned out that it was a pulseaudio issue. After I set up pulseaudio initialy I checked wine and it was running fine but apparently I have tweaked my pulseaudio setup since then and this broke wine. Systemd being the biggest change to my system before i detected the problem, i assumed that it was the reaseon. However it seems that pulseaudio was the culprit and after a little tweking with its configuration file it seems to be OK now. If anyone has the problem, this setting described in the arc wiki was the reason for my problem - https://wiki.archlinux.org/index.php/Pu … _crackling . Using the default set up (as opposed to the option described in the wiki) solved my problem.
    Pse, here's the output of what you requested, ran as a normal user (in pastebin):
    http://pastebin.com/w5A1F9jf
    Last edited by hellfire[bg] (2012-10-14 19:39:30)

  • [SOLVED]ldconfig - Problem after attempt to install Skype

    Hi guys,
    Recently I decided that I wanted to learn how to use and operate Arch Linux.
    I studied the Begginers guide to understand how to install and I did it (=
    But, when I was installing some softwares that I use daily, like gimp, firefox and skype, I had a little problem.
    When I was installing Skype, using
    pacman -S skype
    I got the following message:
    Packages (1): skype-4.3.0.37-3
    Total Download Size: 14.99 MiB
    Total Installed Size: 42.89 MiB
    Net Upgrade Size: 0.00 MiB
    :: Proceed with installation? [Y/n] y
    :: Retrieving packages ...
    skype-4.3.0.37-3-x86_64 15.0 MiB 57.3K/s 04:28 [####################################################################] 100%
    (1/1) checking keys in keyring [####################################################################] 100%
    (1/1) checking package integrity [####################################################################] 100%
    (1/1) loading package files [####################################################################] 100%
    (1/1) checking for file conflicts [####################################################################] 100%
    (1/1) checking available disk space [####################################################################] 100%
    (1/1) reinstalling skype [####################################################################] 100%
    Important update note: Since Skype 4.3, only PulseAudio is supported.
    That means you NEED a working PulseAudio setup to use Skype for voice chatting.
    If you get distorted sound in skype, try adding PULSE_LATENCY_MSEC=60 to your
    env before starting skype. Something like 'export PULSE_LATENCY_MSEC=60' in .bashrc, for example.
    ldconfig: File /usr/lib32/libjson-c.so.2.0.1 is empty, not checked.
    ldconfig: File /usr/lib32/libXrender.so.1.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libiculx.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libmng.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libSM.so.6.0.1 is empty, not checked.
    ldconfig: File /usr/lib32/liblcms2.so.2.0.6 is empty, not checked.
    ldconfig: File /usr/lib32/libasound.so is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisfile.so.3.3.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libattr.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libicule.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC++.so.6.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libfreetype.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisfile.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libicudata.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC++.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-simple.so.0.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/liblcms2.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libicui18n.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libXrandr.so is empty, not checked.
    ldconfig: File /usr/lib32/libicudata.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXtst.so.6.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libICE.so.6.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbis.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so is empty, not checked.
    ldconfig: File /usr/lib32/libpulse.so is empty, not checked.
    ldconfig: File /usr/lib32/libogg.so.0.8.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libicuio.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbis.so is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz.so.0.935.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libmng.so is empty, not checked.
    ldconfig: File /usr/lib32/libasyncns.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libfreetype.so.6.11.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libXtst.so is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libsndfile.so is empty, not checked.
    ldconfig: File /usr/lib32/libfreetype.so is empty, not checked.
    ldconfig: File /usr/lib32/libicudata.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so is empty, not checked.
    ldconfig: File /usr/lib32/libicui18n.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libtiffxx.so is empty, not checked.
    ldconfig: File /usr/lib32/libsndfile.so.1.0.25 is empty, not checked.
    ldconfig: File /usr/lib32/libattr.so.1.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libXi.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXcursor.so is empty, not checked.
    ldconfig: File /usr/lib32/libicuuc.so is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz-icu.so is empty, not checked.
    ldconfig: File /usr/lib32/libjson-c.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC++.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-simple.so is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-mainloop-glib.so.0.0.5 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXrender.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so is empty, not checked.
    ldconfig: File /usr/lib32/libICE.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisenc.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXi.so.6.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libtiffxx.so.5.2.0 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-mainloop-glib.so is empty, not checked.
    ldconfig: File /usr/lib32/libasyncns.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libsqlite3.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so is empty, not checked.
    ldconfig: File /usr/lib32/libSM.so is empty, not checked.
    ldconfig: File /usr/lib32/libfontconfig.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libjson-c.so is empty, not checked.
    ldconfig: File /usr/lib32/libXcursor.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so is empty, not checked.
    ldconfig: File /usr/lib32/libtiff.so.5.2.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libtiff.so is empty, not checked.
    ldconfig: File /usr/lib32/libattr.so is empty, not checked.
    ldconfig: File /usr/lib32/libsndfile.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz-icu.so.0.935.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC.so.8.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisenc.so.2.0.10 is empty, not checked.
    ldconfig: File /usr/lib32/libpng.so is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz-icu.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libicui18n.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libicuio.so is empty, not checked.
    ldconfig: File /usr/lib32/libSM.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libsqlite3.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-simple.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libicule.so is empty, not checked.
    ldconfig: File /usr/lib32/libicutest.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libpng16.so is empty, not checked.
    ldconfig: File /usr/lib32/libXrandr.so.2.2.0 is empty, not checked.
    ldconfig: File /usr/lib32/libfontconfig.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz.so is empty, not checked.
    ldconfig: File /usr/lib32/liblcms2.so is empty, not checked.
    ldconfig: File /usr/lib32/libsqlite3.so.0.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so.4.9 is empty, not checked.
    ldconfig: File /usr/lib32/libtiff.so.5 is empty, not checked.
    ldconfig: File /usr/lib32/libXrender.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbis.so.0.4.7 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so is empty, not checked.
    ldconfig: File /usr/lib32/libicuuc.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-mainloop-glib.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libcap.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libasound.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libicutest.so is empty, not checked.
    ldconfig: File /usr/lib32/libicuuc.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libXtst.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libtiffxx.so.5 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so is empty, not checked.
    ldconfig: File /usr/lib32/libicutest.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libiculx.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisfile.so.3 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libpng16.so.16 is empty, not checked.
    ldconfig: File /usr/lib32/libmng.so.2.0.2 is empty, not checked.
    ldconfig: File /usr/lib32/libicutu.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libpng16.so.16.13.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libicuio.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libXi.so is empty, not checked.
    ldconfig: File /usr/lib32/libicule.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libasyncns.so.0.3.1 is empty, not checked.
    ldconfig: File /usr/lib32/libicutu.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC.so.8 is empty, not checked.
    ldconfig: File /usr/lib32/libICE.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libicutu.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so is empty, not checked.
    ldconfig: File /usr/lib32/libXrandr.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse.so.0.17.3 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libcap.so.2.24 is empty, not checked.
    ldconfig: File /usr/lib32/libogg.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so is empty, not checked.
    ldconfig: File /usr/lib32/libfontconfig.so.1.8.0 is empty, not checked.
    ldconfig: File /usr/lib32/libogg.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so.4.9.4 is empty, not checked.
    ldconfig: File /usr/lib32/libiculx.so is empty, not checked.
    ldconfig: File /usr/lib32/libXcursor.so.1.0.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libasound.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libcap.so is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisenc.so is empty, not checked.
    I'm having problems now with skype and ldconfig.
    I think the skype problem will be solved if this problem with ldconfig is solved, because I looked for some answers first to solve my problem and it seems to be something with missing/corrupted lib files.
    Every time I try to install something I get these messages and if I run ldconfig too.
    Can anyone help me with this?
    I'm using Arch with Cinnamon, on a laptop tha has an Optimus NVIDIA card. (I don't know if it's related but...)
    Some more information that maybe useful:
    The output from ldconfig:
    ldconfig: File /usr/lib32/libjson-c.so.2.0.1 is empty, not checked.
    ldconfig: File /usr/lib32/libXrender.so.1.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libiculx.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libmng.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libSM.so.6.0.1 is empty, not checked.
    ldconfig: File /usr/lib32/liblcms2.so.2.0.6 is empty, not checked.
    ldconfig: File /usr/lib32/libasound.so is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisfile.so.3.3.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libattr.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libicule.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC++.so.6.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libfreetype.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisfile.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libicudata.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC++.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-simple.so.0.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/liblcms2.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libicui18n.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libXrandr.so is empty, not checked.
    ldconfig: File /usr/lib32/libicudata.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXtst.so.6.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libICE.so.6.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbis.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so is empty, not checked.
    ldconfig: File /usr/lib32/libpulse.so is empty, not checked.
    ldconfig: File /usr/lib32/libogg.so.0.8.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libicuio.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbis.so is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz.so.0.935.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libmng.so is empty, not checked.
    ldconfig: File /usr/lib32/libasyncns.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libfreetype.so.6.11.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libXtst.so is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libsndfile.so is empty, not checked.
    ldconfig: File /usr/lib32/libfreetype.so is empty, not checked.
    ldconfig: File /usr/lib32/libicudata.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so is empty, not checked.
    ldconfig: File /usr/lib32/libicui18n.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libtiffxx.so is empty, not checked.
    ldconfig: File /usr/lib32/libsndfile.so.1.0.25 is empty, not checked.
    ldconfig: File /usr/lib32/libattr.so.1.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libXi.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXcursor.so is empty, not checked.
    ldconfig: File /usr/lib32/libicuuc.so is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz-icu.so is empty, not checked.
    ldconfig: File /usr/lib32/libjson-c.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC++.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-simple.so is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-mainloop-glib.so.0.0.5 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXrender.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so is empty, not checked.
    ldconfig: File /usr/lib32/libICE.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisenc.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libXi.so.6.1.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtNetwork.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libtiffxx.so.5.2.0 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-mainloop-glib.so is empty, not checked.
    ldconfig: File /usr/lib32/libasyncns.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libsqlite3.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so is empty, not checked.
    ldconfig: File /usr/lib32/libSM.so is empty, not checked.
    ldconfig: File /usr/lib32/libfontconfig.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libjson-c.so is empty, not checked.
    ldconfig: File /usr/lib32/libXcursor.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so is empty, not checked.
    ldconfig: File /usr/lib32/libtiff.so.5.2.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libtiff.so is empty, not checked.
    ldconfig: File /usr/lib32/libattr.so is empty, not checked.
    ldconfig: File /usr/lib32/libsndfile.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz-icu.so.0.935.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC.so.8.3.0 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisenc.so.2.0.10 is empty, not checked.
    ldconfig: File /usr/lib32/libpng.so is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz-icu.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libicui18n.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libicuio.so is empty, not checked.
    ldconfig: File /usr/lib32/libSM.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libsqlite3.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScriptTools.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-simple.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libicule.so is empty, not checked.
    ldconfig: File /usr/lib32/libicutest.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libpng16.so is empty, not checked.
    ldconfig: File /usr/lib32/libXrandr.so.2.2.0 is empty, not checked.
    ldconfig: File /usr/lib32/libfontconfig.so.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libharfbuzz.so is empty, not checked.
    ldconfig: File /usr/lib32/liblcms2.so is empty, not checked.
    ldconfig: File /usr/lib32/libsqlite3.so.0.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so.4.9 is empty, not checked.
    ldconfig: File /usr/lib32/libtiff.so.5 is empty, not checked.
    ldconfig: File /usr/lib32/libXrender.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbis.so.0.4.7 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDBus.so is empty, not checked.
    ldconfig: File /usr/lib32/libicuuc.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse-mainloop-glib.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libcap.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesigner.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libasound.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libicutest.so is empty, not checked.
    ldconfig: File /usr/lib32/libicuuc.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libXtst.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libtiffxx.so.5 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSql.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtTest.so is empty, not checked.
    ldconfig: File /usr/lib32/libicutest.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libiculx.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisfile.so.3 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXml.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libpng16.so.16 is empty, not checked.
    ldconfig: File /usr/lib32/libmng.so.2.0.2 is empty, not checked.
    ldconfig: File /usr/lib32/libicutu.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libpng16.so.16.13.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtHelp.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libQtXmlPatterns.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libicuio.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDeclarative.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCLucene.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libXi.so is empty, not checked.
    ldconfig: File /usr/lib32/libicule.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libasyncns.so.0.3.1 is empty, not checked.
    ldconfig: File /usr/lib32/libicutu.so.53.1 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtScript.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libQt3Support.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libFLAC.so.8 is empty, not checked.
    ldconfig: File /usr/lib32/libICE.so.6 is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libicutu.so.53 is empty, not checked.
    ldconfig: File /usr/lib32/libQtSvg.so is empty, not checked.
    ldconfig: File /usr/lib32/libXrandr.so.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libQtOpenGL.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libpulse.so.0.17.3 is empty, not checked.
    ldconfig: File /usr/lib32/libQtDesignerComponents.so.4.8 is empty, not checked.
    ldconfig: File /usr/lib32/libcap.so.2.24 is empty, not checked.
    ldconfig: File /usr/lib32/libogg.so.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtGui.so is empty, not checked.
    ldconfig: File /usr/lib32/libfontconfig.so.1.8.0 is empty, not checked.
    ldconfig: File /usr/lib32/libogg.so is empty, not checked.
    ldconfig: File /usr/lib32/libQtWebKit.so.4.9.4 is empty, not checked.
    ldconfig: File /usr/lib32/libiculx.so is empty, not checked.
    ldconfig: File /usr/lib32/libXcursor.so.1.0.2 is empty, not checked.
    ldconfig: File /usr/lib32/libQtMultimedia.so.4 is empty, not checked.
    ldconfig: File /usr/lib32/libasound.so.2.0.0 is empty, not checked.
    ldconfig: File /usr/lib32/libQtCore.so.4.8.6 is empty, not checked.
    ldconfig: File /usr/lib32/libcap.so is empty, not checked.
    ldconfig: File /usr/lib32/libvorbisenc.so is empty, not checked.
    ldconfig: Can't create temporary cache file /etc/ld.so.cache~: Permission denied
    Thanks already for any insights. (=
    Last edited by fcgomes.92 (2014-10-13 16:54:23)

    ewaller wrote:First, don't do pacman -S something     Do a pacman -Syu something
    Ok.
    Thanks for the tip. (=
    Second, did you heed the warning about a working PulseAudio setup?
    I did, acctually my PulseAudio is working, I thought it was something related to that, but after reading some of the lib names it seems like it's related to the Qt lib... I don't know, I couldn't find anyone with a problem like that.

  • [SOLVED] KDEmod problem after Xorg Update

    Hi!
    Before explain my problem, I have to say that my english isn't perfect, sorry ^_^ (i'm spanish).
    Ok, let's go:
    One week ago, I updated my system and Xorg was updated too, since that update my KDEmod restarts always. I read the kdm.log, and it says something about the RGBPath, then I went to my xorg.conf and comment that line.
    After that, I could start my X with Gnome, but when I tried with KDEMod, it says "the module Record doesn't exist", I was searching about this module, and I saw that in xorg.conf there was a line that load this module. I also comment it too.
    Now, when I try to start KDE, it loads, and when in the splashscreen appears the "K", if I click the mouse then appears my Desktop for 3 or 4 seconds, after that, KDE restarts and splashscreen loads another time, so i'm in a bucle. BTW, if i don't click the mouse, it also restarts after 7 or 8 seconds that K is "load", and begin the bucle loading kde with the splash screen too.
    kdm.log doesn't return an error.
    What do you think about that?.
    Thanks!
    EDIT:
    I forgot something: another error that I had is with "libGLcore", it said: "libGLcore.177" and "libGLcore.180" have the same name but different file type (or something like that). I fix with the re-install of the manual nvidia drivers.]
    =================================================================
    FIX
    writte in konsole:
    nvidia-xconfig
    THen add to xorg.conf
    Section "ServerFlags"
    OPtion "AutoAddDevices" "False"
    EndSection
    And then, I fix it.
    =================================================================
    Last edited by d4rkb1t (2008-12-09 20:13:47)

    here you have
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH x86_64
    Current Operating System: Linux nin 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 28 10:35:44 UTC 2008 x86_64
    Build Date: 06 December 2008 11:11:31AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 8 17:34:12 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Touchpad"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x7b54e0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@1:0:0) nVidia Corporation GeForce 8600M GT rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "xtrap"
    (II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
    (II) Module xtrap: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DEC-XTRAP
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 180.06 Sat Nov 8 18:16:47 PST 2008
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.99.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) NVIDIA dlloader X Driver 180.06 Sat Nov 8 17:56:34 PST 2008
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "NoLogo" "True"
    (**) NVIDIA(0): Option "RenderAccel" "True"
    (**) NVIDIA(0): Option "TripleBuffer" "True"
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
    (**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
    (**) NVIDIA(0): Option "PixmapCacheSize" "300000"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce 8600M GT (G84) at PCI:1:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 524288 kBytes
    (--) NVIDIA(0): VideoBIOS: 60.84.5e.00.08
    (II) NVIDIA(0): Detected PCI Express Link width: 16X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce 8600M GT at PCI:1:0:0:
    (--) NVIDIA(0): Seiko (DFP-0)
    (--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
    (--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x800"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
    (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GPU GART.
    (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    (II) NVIDIA(0): configuration option may not be set correctly. When the
    (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    (II) NVIDIA(0): Config Options in the README.
    (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    (II) NVIDIA(0): enough to receive ACPI display change hotkey events.
    (II) NVIDIA(0): Setting mode "1280x800"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (==) NVIDIA(0): Disabling shared memory pixmaps
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (**) NVIDIA(0): Option "BackingStore" "True"
    (**) NVIDIA(0): Backing store enabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (II) Loading extension XINERAMA
    (WW) NVIDIA(0): Option "AGPFastWrite" is not used
    (WW) NVIDIA(0): Option "EnablePageFlip" is not used
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) Initializing extension GLX
    (II) Synaptics touchpad driver version 0.99.1
    Touchpad no synaptics event device found
    (**) Option "Device" "/dev/input/mouse0"
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "FingerLow" "15"
    (**) Option "FingerHigh" "40"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (**) Option "VertScrollDelta" "100"
    Query no Synaptics: 6003C8
    (--) Touchpad: no supported touchpad found
    (**) Option "SendCoreEvents"
    (**) Touchpad: always reports core events
    (II) evaluating device (Touchpad)
    (II) XINPUT: Adding extended input device "Touchpad" (type: TOUCHPAD)
    Touchpad no synaptics event device found
    Query no Synaptics: 6003C8
    (--) Touchpad: no supported touchpad found
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 2.0.7
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event12"
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Found mouse buttons
    (II) PS/2 Generic Mouse: Configuring as mouse
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (II) config/hal: Adding input device Logitech USB Receiver
    (**) Logitech USB Receiver: always reports core events
    (**) Logitech USB Receiver: Device: "/dev/input/event11"
    (II) Logitech USB Receiver: Found x and y relative axes
    (II) Logitech USB Receiver: Found mouse buttons
    (II) Logitech USB Receiver: Configuring as mouse
    (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
    (II) config/hal: Adding input device PS/2 Generic Mouse
    (**) PS/2 Generic Mouse: always reports core events
    (**) PS/2 Generic Mouse: Device: "/dev/input/event9"
    (II) PS/2 Generic Mouse: Found x and y relative axes
    (II) PS/2 Generic Mouse: Found mouse buttons
    (II) PS/2 Generic Mouse: Configuring as mouse
    (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
    (II) config/hal: Adding input device Broadcom Corp
    (**) Broadcom Corp: always reports core events
    (**) Broadcom Corp: Device: "/dev/input/event8"
    (II) Broadcom Corp: Found x and y relative axes
    (II) Broadcom Corp: Found mouse buttons
    (II) Broadcom Corp: Configuring as mouse
    (II) XINPUT: Adding extended input device "Broadcom Corp" (type: MOUSE)
    (II) config/hal: Adding input device Broadcom Corp
    (**) Broadcom Corp: always reports core events
    (**) Broadcom Corp: Device: "/dev/input/event7"
    (II) Broadcom Corp: Found keys
    (II) Broadcom Corp: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Broadcom Corp" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) Broadcom Corp: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) Broadcom Corp: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) Broadcom Corp: xkb_layout: "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) Video Bus: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) Video Bus: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) Video Bus: xkb_layout: "us"
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "base"
    (**) AT Translated Set 2 keyboard: xkb_rules: "base"
    (**) Option "xkb_model" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_model: "evdev"
    (**) Option "xkb_layout" "us"
    (**) AT Translated Set 2 keyboard: xkb_layout: "us"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)

  • [solved] dhcpcd problem after upgrading to 6.0.4/6.0.5

    I cant access any network after upgrading to 6.0.4 or 6.0.5.
    Im using the Linux-Kernel 3.10.3.
    Does anyone have the same problem?
    Downgrading to 5.6.8 solved this problem.
    Here is the output of dhcpcd and wpa_supplicant:
    dhcpcd[28734]: version 6.0.4 starting
    dhcpcd[28742]: wlan0: starting wpa_supplicant
    dhcpcd[28734]: eth0: waiting for carrier
    dhcpcd[28734]: wlan0: waiting for carrier
    dhcpcd[28734]: wlan0: carrier acquired
    dhcpcd[28734]: wlan0: soliciting an IPv6 router
    dhcpcd[28734]: wlan0: rebinding lease of 192.168.0.104
    dhcpcd[28734]: wlan0: soliciting a DHCP lease
    dhcpcd[28734]: wlan0: carrier lost
    dhcpcd[28734]: wlan0: carrier acquired
    dhcpcd[28734]: wlan0: soliciting an IPv6 router
    dhcpcd[28734]: wlan0: rebinding lease of 192.168.0.104
    dhcpcd[28734]: wlan0: leased 192.168.0.104 for 86400 seconds
    dhcpcd[28734]: wlan0: adding host route to 192.168.0.104 via 127.0.0.1
    dhcpcd[28734]: wlan0: adding route to 192.168.0.0/24
    dhcpcd[28734]: wlan0: adding default route via 192.168.0.1
    dhcpcd[28734]: forked to background, child pid 28849
    Successfully initialized wpa_supplicant
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: WPA: Key negotiation completed with f8:df:a8:33:0e:7f [PTK=TKIP GTK=TKIP]
    wlan0: CTRL-EVENT-CONNECTED - Connection to f8:df:a8:33:0e:7f completed [id=2 id_str=]
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    wlan0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    wlan0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    wlan0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    wlan0: Authentication with f8:df:a8:33:0e:7f timed out.
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=2 ssid="VHC" auth_failures=1 duration=10
    wlan0: Failed to initiate AP scan
    wlan0: Failed to initiate AP scan
    wlan0: Failed to initiate AP scan
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: Failed to initiate AP scan
    wlan0: Failed to initiate AP scan
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: CTRL-EVENT-SSID-REENABLED id=2 ssid="VHC"
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: WPA: Key negotiation completed with f8:df:a8:33:0e:7f [PTK=TKIP GTK=TKIP]
    wlan0: CTRL-EVENT-CONNECTED - Connection to f8:df:a8:33:0e:7f completed [id=2 id_str=]
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
    Edit:
    I reported this.
    Last edited by rosenrot (2013-08-08 13:35:18)

    rosenrot wrote:I solved it with downgrading, I think its a Bug.
    1. Not exactly a solution, more like a temporary workaround.
    2. Please open a bug report, although dhcpcd 6.0.5-1 works fine for me.
    3. When pasting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    It makes the code more readable and - in case of longer listings - more convenient to scroll through.

  • [solved] dhcp-problems after updating package networkmanager 0.9.4.0-6

    Hi,
    I have some problems to get an ip address with dhcp on the device eth0. On wlan0 I get a ip address with dhcp depending on the network.
    Anyone with the same problem after the update from version 5 to version 6?
    After downgrading to version 5 everything works fine...
    Thank you!
    EDIT:
    Don't know what it was, today after updating only networkmanager everything works fine.
    Last edited by yannsen (2012-06-19 08:23:52)

    Hi,
    I have some problems to get an ip address with dhcp on the device eth0. On wlan0 I get a ip address with dhcp depending on the network.
    Anyone with the same problem after the update from version 5 to version 6?
    After downgrading to version 5 everything works fine...
    Thank you!
    EDIT:
    Don't know what it was, today after updating only networkmanager everything works fine.
    Last edited by yannsen (2012-06-19 08:23:52)

  • [solved]display problems after installing nvidia driver

    hi
    i have nvidia geforce 8400 gs card, after i uninstalled all other drivers, installed nvidia,nvidia-utils, then nvidia-config,then installed vpdau-video,then restart
    i noticed that hardware and deamon checks screen after boot became huge letters as if no driver installed yet, and when i run lxterminal i noticed black window on the top left of the screen exactly the same size as the terminal window, and when i browse using chromium and the page contains flash video, the video window image stays on the screen.
    Last edited by shalaby (2011-05-02 15:33:41)

    I think current nvidia driver is broken - I have these black windows at some rare situations also (under KDE without effects; no under OpenBox). IIRC, nvidia developers mentioned somewhere in Arch bugs system they are aware of the problem.

  • [SOLVED] xorg / nvidia problems after upgrade

    Hello,
    I have recently done an upgrade with pacman -Syu and am having problems.
    When X starts, it hangs at a blank screen. Keyboard is frozen and I am unable to hit another tty.  I can ssh in, but I cannot even seem to kill X, or reboot. I am forced to do a hard reboot.
    I have tracked the problem down to running multiple X sessions. I currently have 4 monitors, and have them configured such that I have 2 X sessions, (2 monitiors with twinview on each session).  I can get things working on 2 monitors using twinview, but I cannot get X to start properly if I enable the second X session. (I have tried everything and cannot get anything to come up unto a third monitor... I can only get X working on 2..)
    This seems like it could be a bug. Although I am not sure if the problem is with X or with the nvidia drivers, as both were updated, however I am thinking it is an issue with X.
    I have checked and rechecked my xorg log files, and there are no errors, however, once I did see this error, but it did not happen consistently..
    [mi] EQ overflowing. The server is probably stuck in an infinite loop
    Any suggestions?  I would like even be happy with downgrading some packages to get this working again.
    Last edited by mikej_96 (2010-03-20 19:49:49)

    mikej_96 wrote:
    Update 2:
    Since downgrading xorg-server didn't help, I decided to try installing the latest and greated nvidia drivers. I grabbed them from their website, and uninstalled the nvida package from arch. (Version 190.53.1).  The drivers I am currently running are 195.36.15 and all is well.
    Instead of installing non-managed packages, why not use nvidia-beta and nvidia-utils-beta from the AUR?

  • [SOLVED] Several problems after fresh installation

    Hi guys,
    i just did a fresh installation of arch and every times i must do something i get this error:
    cannot remove, read, edit and etc : read-only file system
    So i searched for a workaround.. but i must do this after every boot
    This is it:
    mount -oremount,rw /
    There's a way to fix this forever?
    Often when i need to edit some files, like /etc/pacman.conf or xorg config file, arch tell me: You do not have write permission to modify... that file
    Searched another workaround.. and also this i must do every time after each boot:
    sudo chown -R black /directory of file that i'm trying to edit/
    I hope to fix this annoying problems, with your help.
    Thanks guys,
    Gabriele.
    Last edited by Lilith (2012-09-28 13:18:46)

    Ok guys,
    think solved by change my /sda6/ (root) by /mnt to / and adding a slash / before home, boot, var.
    Rebooted and try to edit the same file /etc/fstab and no warnings
    Now is like this:
    # /etc/fstab: static file system information
    # <file system> <dir>     <type>     <options>                <dump>    <pass>
    tmpfs                    /tmp        tmps        nodev,nosuid             0                0
    #UUID=blablablabla
    /dev/sda6                  /             ext4                  rw,relatime           0   1
    #UUID=blablabla
    /dev/sda9                  /home            ext4                 rw,relatime            0   2
    #UUID=blablabla
    /dev/sda5                  /boot              ext2                 rw,relatime             0   2
    #UUID=blablabla
    /dev/sda7                  /var                 reiserfs            rw,relatime             0   2
    #UUID=blablabla
    /dev/sda8                  none              swap                defaults                  0   0
    Thanks to everyone i also fixed my 2nd problem that i think is related to the first
    Last edited by Lilith (2012-09-28 13:15:43)

  • Keyboard problems after xorgconfig Dell VostroV1400 [Solved]

    Hi all,
          I installed Arch on my Dell Vostro V1400.  I installed xorg too.  Then I did hwd -xa.  After this I tried 'startx'.  The screen showing xterm came but the keyboard and touchpad were not working.  I could neither go to the console nor do Ctrl+Alt+Del to reboot.  Did hard shutdown.
          I then tried xorgconfig but found there was no mention of my dell vostro keyboard, the X3100 graphics card, touchpad etc in it.  To add to it my laptop manual does not have any information about horizontal and vertical syc rates.  It only states that the laptop display is 14.1" WXGA capable of 1280x800 resolution.  Nothing else.  So, I choose the defaluts.
    # File generated by xorgconfig.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "inspiron"
    Option "XkbLayout" "us"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5 - 64.3
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-100
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "* Generic VESA compatible"
    Driver "vesa"
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "* Generic VESA compatible"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    Even after xorgconfig the same problem.  I can start X with startx but the moment X comes, the keyboard and touchpad freeze.  Don't know what to do.  FYI, Dell has stopped this particular model V1400 and I could not find any information in their website.  As you may be knowing, almost all the 'reviews' talk only about the external appearences, how the camera is,  etc... stuff only.  So, no information there too.
    Kindly help me to get X working.

    tomk wrote:Finally, if you need to post long config files, use code tags, not quote tags. I have fixed it for you this time.
    I'm sorry about that.  Will take care next time. 
          By the way, the problem is solved.  Somebody in the IRC pointed me to a wiki related to input-hotplugging.  Frankly, I did not understand much of it except that I needed to install package/s: xf86-input-evdev, xf86-input-vmmouse and xf86-input-synaptics.
          Also, was the advice that 'hal' should be included in the DAEMONS, if not already done and that it should come before anything X related in the list.  Edited '/etc/rc.conf' accordingly and X is working fine now.
    Thanks,
    SV
    Last edited by saivin (2009-01-03 18:17:15)

  • [SOLVED]Multiple Problems after a new install on Arch Linux

    Hello all,
    I just finished installing Arch Linux from the core ISO which I downloaded from the site. The install went smoothly and booted up fine. Also I was able to install gnome and its extras fine as well. On the first boot after installing gnome I managed to get my resolution correct also. However later on after I installed compiz fusion everything with the resolution seems to be going wrong . My computer specs are shown below :
    AMD 64 3200
    Asus M2N MX-SE
    2 GB Ram
    Geforce 8600 GT
    Viewsonic VA1918wm (Native resolution is 1440x900)
    At the moment I can only manage to get upto 1024x768 and it looks quite bad at that resolution. I have attached the xorg.conf I have at the moment.
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dbe"
    Load "record"
    Load "extmod"
    Load "glx"
    Load "dri2"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "G84 [GeForce 8600 GT]"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    While I was trying to fix this I noticed I was encountering other problems also. For one I found that sometimes dhcpcd times out on booting up and I cant seemt o connect to the Internet on booting. Although I just thought of trying a static IP and I'll post if that helped later on.
    Another problem is I found that I seem to get the following error randomly. Pressing ctrl + D after this just restarts the machine.
    The superblock could not be read or does not describe a correct ext2
    filesystem. If the device is valid and it really contains an ext2
    filesystem (and not swap or ufs or something else), then the superblock
    is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
    Finally, while I boot up I noticed that it says "Mounting root partition as read only   [DONE]"  Is the root partition supposed ot be mounted as read only ? Attached my fstab just in case it is needed.
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    #/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
    #/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
    #/dev/fd0 /media/fl auto user,noauto 0 0
    /dev/sda3 /boot ext3 defaults 0 1
    /dev/sdb1 / ext3 defaults 0 1
    /dev/sdb2 swap swap defaults 0 0
    /dev/sdb3 /home ext3 defaults 0 1
    As you can see I'm quite new to Arch Linux so any help would be deeply appreciated.
    Last edited by FilledVoid (2009-09-11 16:28:28)

    Thank you for all your suggestions . I tried replacing the ID to Card0 but it didnt seem to fix it . However on the bright side I checked more threads on the forum and found some that helped out . :)
    http://bbs.archlinux.org/viewtopic.php?id=75070&p=2
    http://bbs.archlinux.org/viewtopic.php?id=72788
    http://bbs.archlinux.org/viewtopic.php?id=76938
    I copied the xorg.conf file from the third link and just made minor changes to it like removing all the resolutions I didn't need and now its working fine :).
    Now Im just stuck with two problems. One is the following message which appears randomly.
    The superblock could not be read or does not describe a correct ext2
    filesystem. If the device is valid and it really contains an ext2
    filesystem (and not swap or ufs or something else), then the superblock
    is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
    ******************* FILESYSTEM CHECK FAILED *************
    * Please repair manually and reboot. Note that the root *
    * filesystem is currently mounted read-only. To remount *
    * it read-write type: mount -n -o remount,rw / *
    * When you exit the mantenance shel the system will *
    * reboot automatically. *
    A thread about the same can be found http://bbs.archlinux.org/viewtopic.php?pid=295384 but there isn't a solution on it. 
    The second is the intermittent problems with the Network being setup. Sometimes when I boot up it just says dhcpcd timedout and I won't be able to connect . However I can connect on another machine at the same time.
    Took a look at the drive in question with gparted and it shows the below information:
    /dev/sdb1 ext3   /   32.59 GB    4.92 GB   27.68 GB  boot
    By any chance is any of the above information relevant :x ?

  • [SOLVED] Suspend problem after upgrading to GNOME 3.4

    My laptop doesn't suspend when lid is closed !
    I have set suspend values in gnome-tweak-tool but seems it's not working !
    I had no problem in GNOME 3.2 !
    thanks in advance ...
    SOLUTION: [Thanks to Munken] reverting to  gnome-settings-daemon to 3.2.2-1 fixes the problem..
    Last edited by bahramwhh (2012-04-26 07:49:50)

    Archdove wrote:Is there a solution yet? Thread is marked as solved but it really isn't?
    I agree, downgrading  gnome-settings-daemon to 3.2.2-1 is not a permanent solution .! !  This thread should really not be marked as solved. 
    I still have the same exact same problem, and nothing happens on the bugtracker.
    I have tried to supply them with info, but it is still listed as NEEDINFO..
    I am totally new to bug trackers. Maybe someone with more knowledge could check if the bug is listed correct. ? ?
    Any help would be appreciated.  I do not like the idea of Acpid either.

Maybe you are looking for

  • Example BPEL Process calling/invoking a web service.

    Hi, 1.Could someone please help me with this...Need some guidance regards calling a web service from a simple bpel process. Is there any example or tutorial which would help us to design a simple bpel process which takes in some input values from the

  • Invisible Files Not Shown By Finder

    When I plug in my USB stick to delete some files on it, they seem to be gone afterwards, using Finder as my file browser. When I plug in the same stick in a PC, I see that the files are still there, starting with For example: ._letter On my mac, thes

  • Cut-Off

    When some one callls and your on a dial-up connection, does the iBook have software that has a little pop up saying incoming call and gives u a choice to bypass the call or disconnect internet and answer the phone? If you can understan what im saying

  • Boolean property export issue in DRM

    Hi All, We have a boolean property in DRM. In DRM 1.1.2, when we export this property to Database, it populates value as -1 for True and 0 for false. But in DRM 1.2.2, the values appear as TRUE/FALSE in the column in the database. Is this an expected

  • The trouble with all of Verizon's websites.

    Ok, here's the background... Where I live, I cannot get satelite or wireless. (Terrain. I live in the mountains.) There is no cable. And although there is a DSL capable Verizon sub-station within half a mile of my home, (And many others here.), Veriz