[SOLVED] NVIDIA question

In rc.local, my code to config the video driver at launch of the LIVE CD is:
Xorg -configure && cp /xorg.conf.new /etc/X11/xorg.conf
Let's say I included NVIDIA proprietary driver, my question is what code would I have to put to recognize if there is a nvidia card installed in the computer.
So if there's an NVIDIA card, it would do
nvidia-xconfig
and if not, it would do
Xorg -configure && cp /xorg.conf.new /etc/X11/xorg.conf
Thanks in advance for helping
Last edited by willxtreme (2010-01-30 22:16:03)

if (lspci | grep nVidia &> /dev/null); then
else
fi

Similar Messages

  • How to undo "This solved my question" on this Using iPhone forum?

    How to undo "This solved my question" on this "Using iPhone" forum?
    new to this forum... how do you undo this?

    **** lol, In that case they should give a warning or some type of "You sure?" yes/no. I clicked completely by mistake. anyways...

  • Can't mark reply "This solved my question"

    In the email I received that notified me of a reply to my question, when I click on the link for either "This solved my question" or "This helped me", it takes me to Safari, but gives me the following:
    Apple Support Communities
    Unauthorized
    It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
    If I sign in to the Discussions, and go to Your Stuff and choose the question, I see the Legend, but there are no buttons for me to mark a reply as "This solved my question" or "This helped me". 
    Any idea why I can't do this?  I'm running Mac OS 10.8.5, and Safari 6.0.5.  Could there be something in my Safari settings that is blocking this?
    Thanks,
    Marcia Bolsinga

    There have also been intermittent problems with the forum software lately and this might be causing this problem.
    Try going to your thread again and see if the symptoms change any,

  • Help me for solve this Question this is my problem

    help me for solve this Question this is my problem
    i installed EBS 11i fresh not vision
    i did cart of account and did set of book
    then assigned it with profile option gl set of books name
    and when enter to make ajournal appeare this messege
    [http://www9.0zz0.com/2009/10/06/03/232202588.jpg]
    [http://www9.0zz0.com/2009/10/06/03/634050066.jpg]

    Hi,
    Not sure why are you getting this kind of error (which is pointing to a URL with Jpg file) while creating a journal.
    Could you please bounce your server once and try..
    Please let us know if the error/warning stopping you to enter a journal in GL??
    We don't think profile option is a show stopper here.... We assume that you have assigned Sets of Books, MO: Operating unit & HR USer Profile option at Responsibility level correctly....
    Regards,
    S.P DASH

  • I am trying to use the "This solved my question - 10 points" and the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

    I am trying to use the "This solved my question - 10 points" an the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

    Are you talking about the "Legend" panel at the right of the window?
    Those text are just help texts explaining the reputation points. You can only award points, if you are the original poster of a question. Then you will see active buttons to award points below the answers you receive. See here for more information: https://discussions.apple.com/static/apple/tutorial/reputation.html
    Regards
    Léonie

  • How do I uncheck "This solved my question" on the Apple Support Communities forum?

    I checked an answer as "this solved my problem" when it actually did not, and I don't want anyone to be mislead.
    How do I uncheck "This solved my question" on the Apple Support Communities forum?

    You can't uncheck it. You'll need to post the question again.
    You could also just add the comment that it was not actually answered.

  • [Solved] Nvidia-ck question

    Hi.
    I'm currently running the linux-ck, and nvidia-ck, packages from Graysky's repo.
    When I go to update my total system, I get two instances of nvidia to upgrade.
    Is there any way to remove the dependencies on the opencl-nvidia package, and just use the nvidia-ck?
    EDIT:
    Upgraded around the one package that refuse to uninstall, re-logged in, and successfully uninstalled said package.
    Last edited by *nixer (2011-11-24 00:17:52)

    Apologies...
    What I originally had going was the default Arch kernel, and the non-free Nvidia drivers installed. I did some reading on the BF scheduler, and decide your prebuilt kernel, headers, and nvidia packages would be the most optimal. My PC is too old to compile a kernel every update...
    When I was comfortable with the results, I uninstalled the linux, and linux-headers. If I tried to uninstall the opncl-nvidia package, all of my nvidia dependant packages prevented it, and this was despite myself already running your ck kernel+nvidia setup.
    I'm not sure why, but after I manually upgraded all the packages shown by 'pacman -Syu' with the exception of opencl-nvidia, I was then able to uninstall it just fine after a logout/login.

  • [SOLVED] nvidia-settings startup delay

    Does anyone happen to know why nvidia-settings takes a good 3-4 minutes to open after open it from the menu or the terminal, sudo or as user? I'm on xfce and didn't have this problem on Cinnamon or Ubuntu Gnome-Shell.
    I have to use this settings panel to turn "on" my secondary display when I plug it up also for some reason, this is new too, but I suppose not relevant to the original question. Bonus points if you know why this is too!
    Last edited by Somnus (2013-07-29 12:54:00)

    Actually, chalk this up to not looking hard enough again. The suggestion to add
    127.0.0.1 myhostname
    to /etc/hosts seems to have solved the issue.
    Reference:
    https://bbs.archlinux.org/viewtopic.php?id=161837

  • [Solved] Nvidia after kernel update

    The nvidia wiki clearly states that: "Every time the kernel26 package is updated, it is a requirement to reinstall the nvidia package and rebooting afterwards. "
    But my question is, why? I mean, if the module was to be recompiled, that would make sense. But what does just reinstalling the driver accomplish? In my system, pacman -Ql nvidia shows:
    $ pacman -Ql nvidia
    nvidia /etc/
    nvidia /etc/modprobe.d/
    nvidia /etc/modprobe.d/nouveau_blacklist.conf
    nvidia /lib/
    nvidia /lib/modules/
    nvidia /lib/modules/2.6.35-ARCH/
    nvidia /lib/modules/2.6.35-ARCH/kernel/
    nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/
    nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/
    nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/nvidia.ko
    From what I've read, I think the kernel update process copies the compiled modules into the proper folder (inside /lib) named by the kernel version. Should this not be the case with nvidia? If it is not, then is this why the reinstall is needed?
    Thanks in advance (and my apologies if I've glossed over something that's patently obvious --- while I've searched for the answer before posting, I am still quite the novice at tinkering with the kernel)
    EDIT: just after posting I've realized that maybe this post belongs in "Kernel and Hardware Issues" subforum. But the truth is this isn't really an "issue"... it's more a question from, well, a newbie :-)
    Last edited by gauthma (2010-09-28 21:53:04)

    gauthma wrote:
    Thank you for the feedback.
    ngoonee wrote:Of course, if you're using nvidia-beta or some other AUR nvidia driver, you need to reinstall it.
    Running the risk of asking what might be obvious to some, why?
    The driver speaks to the kernel. When the kernel updates, the language used might have changed in various ways. Since nvidia is closed-source, its not always obvious whether what has changed affects it. The same applies to xorg-server, when it updates you should recompile your nvidia driver. Its SOMETIMES not needed, but when it is, would you rather be solving it from the tty?
    quathma wrote:
    ngoonee wrote:That's what the wiki is referring to. Even if the kernel major version has not updated (for example 2.6.35.5 to 2.6.35.6 is only a minor version bump) the driver may need to be recompiled. Safer to just do it everytime and restart the machine.
    Now I'm confused. Are you saying that the safest approach is to recompile and (re)install the nvidia module after each kernel update? And does this only apply to modules from beta & AUR, or [extra] as well? And shouldn't all this issue of recompiling modules also apply to every other module installed in the system?
    Yes that's the safest approach. [extra] is taken care of by the devs, the simple way is to assume they'll bump it if needed (and you don't need to do anything).
    The same thing applies to almost any kernel module (AFAIK). It applies to virtualbox's modules, for sure, as well as phc-intel (the only other 2 external modules I use). Most kernel modules are actually compiled in to the kernel26 package anyway, so its not very many. I just automatically recompile the ones I use whenever I notice a kernel/xorg update.

  • [SOLVED] nvidia and xorg-server, slow start compared to nv

    I've seen many similar topics but none that have been solved, therefore the new topic.
    Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    EndSection
    The /var/log/Xorg.0.log when using nvidia:
    [ 22.779]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 22.779] X Protocol Version 11, Revision 0
    [ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 22.779] Build Date: 30 May 2012 07:24:13PM
    [ 22.779]
    [ 22.779] Current version of pixman: 0.26.0
    [ 22.779] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
    [ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.106] (==) No Layout section. Using the first Screen section.
    [ 23.106] (==) No screen section available. Using defaults.
    [ 23.106] (**) |-->Screen "Default Screen Section" (0)
    [ 23.106] (**) | |-->Monitor "<default monitor>"
    [ 23.106] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 23.106] (**) | |-->Device "Device0"
    [ 23.106] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.106] (==) Automatically adding devices
    [ 23.106] (==) Automatically enabling devices
    [ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.219] Entry deleted from font path.
    [ 23.414] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.414] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.414] (II) Loader magic: 0x7c58e0
    [ 23.414] (II) Module ABI versions:
    [ 23.414] X.Org ANSI C Emulation: 0.4
    [ 23.414] X.Org Video Driver: 12.0
    [ 23.414] X.Org XInput driver : 16.0
    [ 23.414] X.Org Server Extension : 6.0
    [ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 23.415] (II) LoadModule: "extmod"
    [ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.487] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.487] compiled for 1.12.2, module version = 1.0.0
    [ 23.487] Module class: X.Org Server Extension
    [ 23.487] ABI class: X.Org Server Extension, version 6.0
    [ 23.487] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.487] (II) Loading extension XFree86-VidModeExtension
    [ 23.487] (II) Loading extension XFree86-DGA
    [ 23.487] (II) Loading extension DPMS
    [ 23.487] (II) Loading extension XVideo
    [ 23.487] (II) Loading extension XVideo-MotionCompensation
    [ 23.487] (II) Loading extension X-Resource
    [ 23.487] (II) LoadModule: "dbe"
    [ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.512] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.512] compiled for 1.12.2, module version = 1.0.0
    [ 23.512] Module class: X.Org Server Extension
    [ 23.512] ABI class: X.Org Server Extension, version 6.0
    [ 23.512] (II) Loading extension DOUBLE-BUFFER
    [ 23.512] (II) LoadModule: "glx"
    [ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
    [ 26.868] compiled for 4.0.2, module version = 1.0.0
    [ 26.868] Module class: X.Org Server Extension
    [ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 26.869] (II) Loading extension GLX
    [ 26.869] (II) LoadModule: "record"
    [ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 26.941] (II) Module record: vendor="X.Org Foundation"
    [ 26.941] compiled for 1.12.2, module version = 1.13.0
    [ 26.941] Module class: X.Org Server Extension
    [ 26.941] ABI class: X.Org Server Extension, version 6.0
    [ 26.941] (II) Loading extension RECORD
    [ 26.941] (II) LoadModule: "dri"
    [ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 27.011] (II) Module dri: vendor="X.Org Foundation"
    [ 27.011] compiled for 1.12.2, module version = 1.0.0
    [ 27.011] ABI class: X.Org Server Extension, version 6.0
    [ 27.011] (II) Loading extension XFree86-DRI
    [ 27.011] (II) LoadModule: "dri2"
    [ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 27.046] (II) Module dri2: vendor="X.Org Foundation"
    [ 27.047] compiled for 1.12.2, module version = 1.2.0
    [ 27.047] ABI class: X.Org Server Extension, version 6.0
    [ 27.047] (II) Loading extension DRI2
    [ 27.047] (II) LoadModule: "nvidia"
    [ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 27.306] compiled for 4.0.2, module version = 1.0.0
    [ 27.306] Module class: X.Org Video Driver
    [ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
    [ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 27.617] (++) using VT number 7
    [ 27.678] (II) Loading sub module "fb"
    [ 27.678] (II) LoadModule: "fb"
    [ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 27.870] (II) Module fb: vendor="X.Org Foundation"
    [ 27.870] compiled for 1.12.2, module version = 1.0.0
    [ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.870] (II) Loading sub module "wfb"
    [ 27.870] (II) LoadModule: "wfb"
    [ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.879] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.879] compiled for 1.12.2, module version = 1.0.0
    [ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.879] (II) Loading sub module "ramdac"
    [ 27.879] (II) LoadModule: "ramdac"
    [ 27.879] (II) Module "ramdac" already built-in
    [ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 27.934] (==) NVIDIA(0): RGB weight 888
    [ 27.934] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
    [ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
    [ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
    [ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
    [ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
    [ 30.789] (--) NVIDIA(0): clock
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
    [ 30.789] (--) NVIDIA(0): LVDS
    [ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
    [ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 30.836] (==) NVIDIA(0): will be used as the requested mode.
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (II) NVIDIA(0): Validated modes:
    [ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
    [ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
    [ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
    [ 31.892] (--) NVIDIA(0): option
    [ 31.892] (--) Depth 24 pixmap format is 32 bpp
    [ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 34.862] (II) Loading extension NV-GLX
    [ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 37.299] (==) NVIDIA(0): Backing store disabled
    [ 37.299] (==) NVIDIA(0): Silken mouse enabled
    [ 37.300] (==) NVIDIA(0): DPMS enabled
    [ 37.300] (II) Loading extension NV-CONTROL
    [ 37.300] (II) Loading extension XINERAMA
    [ 37.300] (II) Loading sub module "dri2"
    [ 37.300] (II) LoadModule: "dri2"
    [ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 37.300] (II) Module dri2: vendor="X.Org Foundation"
    [ 37.300] compiled for 1.12.2, module version = 1.2.0
    [ 37.300] ABI class: X.Org Server Extension, version 6.0
    [ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
    [ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 37.301] (==) RandR enabled
    [ 37.301] (II) Initializing built-in extension Generic Event Extension
    [ 37.301] (II) Initializing built-in extension SHAPE
    [ 37.301] (II) Initializing built-in extension MIT-SHM
    [ 37.301] (II) Initializing built-in extension XInputExtension
    [ 37.301] (II) Initializing built-in extension XTEST
    [ 37.301] (II) Initializing built-in extension BIG-REQUESTS
    [ 37.301] (II) Initializing built-in extension SYNC
    [ 37.301] (II) Initializing built-in extension XKEYBOARD
    [ 37.301] (II) Initializing built-in extension XC-MISC
    [ 37.301] (II) Initializing built-in extension SECURITY
    [ 37.301] (II) Initializing built-in extension XINERAMA
    [ 37.301] (II) Initializing built-in extension XFIXES
    [ 37.301] (II) Initializing built-in extension RENDER
    [ 37.301] (II) Initializing built-in extension RANDR
    [ 37.301] (II) Initializing built-in extension COMPOSITE
    [ 37.301] (II) Initializing built-in extension DAMAGE
    [ 37.302] (II) Initializing extension GLX
    [ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.717] (II) LoadModule: "evdev"
    [ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 38.769] (II) Module evdev: vendor="X.Org Foundation"
    [ 38.769] compiled for 1.12.0, module version = 2.7.0
    [ 38.769] Module class: X.Org XInput Driver
    [ 38.769] ABI class: X.Org XInput driver, version 16.0
    [ 38.769] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.769] (**) Power Button: always reports core events
    [ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.769] (--) evdev: Power Button: Found keys
    [ 38.769] (II) evdev: Power Button: Configuring as keyboard
    [ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 38.769] (**) Option "xkb_rules" "evdev"
    [ 38.769] (**) Option "xkb_model" "evdev"
    [ 38.769] (**) Option "xkb_layout" "se"
    [ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
    [ 38.835] (**) Video Bus: always reports core events
    [ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 38.835] (--) evdev: Video Bus: Found keys
    [ 38.835] (II) evdev: Video Bus: Configuring as keyboard
    [ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 38.836] (**) Option "xkb_rules" "evdev"
    [ 38.836] (**) Option "xkb_model" "evdev"
    [ 38.836] (**) Option "xkb_layout" "se"
    [ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.837] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.837] (**) Power Button: always reports core events
    [ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.837] (--) evdev: Power Button: Found keys
    [ 38.837] (II) evdev: Power Button: Configuring as keyboard
    [ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 38.837] (**) Option "xkb_rules" "evdev"
    [ 38.837] (**) Option "xkb_model" "evdev"
    [ 38.837] (**) Option "xkb_layout" "se"
    [ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 38.838] (II) No input driver specified, ignoring this device.
    [ 38.838] (II) This device may have been added with another device file.
    [ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 38.838] (**) Sleep Button: always reports core events
    [ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 38.839] (--) evdev: Sleep Button: Found keys
    [ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
    [ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 38.839] (**) Option "xkb_rules" "evdev"
    [ 38.839] (**) Option "xkb_model" "evdev"
    [ 38.839] (**) Option "xkb_layout" "se"
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.842] (**) Logitech USB Receiver: always reports core events
    [ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 38.844] (II) No input driver specified, ignoring this device.
    [ 38.844] (II) This device may have been added with another device file.
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.844] (**) Logitech USB Receiver: always reports core events
    [ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found keys
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 38.845] (**) Option "xkb_rules" "evdev"
    [ 38.845] (**) Option "xkb_model" "evdev"
    [ 38.845] (**) Option "xkb_layout" "se"
    [ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 38.846] (**) USB 2.0 PC Camera: always reports core events
    [ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 38.846] (**) Option "xkb_rules" "evdev"
    [ 38.846] (**) Option "xkb_model" "evdev"
    [ 38.847] (**) Option "xkb_layout" "se"
    [ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
    [ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 38.848] (**) Option "xkb_rules" "evdev"
    [ 38.848] (**) Option "xkb_model" "evdev"
    [ 38.848] (**) Option "xkb_layout" "se"
    [ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 38.848] (II) LoadModule: "synaptics"
    [ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
    [ 38.911] compiled for 1.12.1, module version = 1.6.1
    [ 38.911] Module class: X.Org XInput Driver
    [ 38.911] ABI class: X.Org XInput driver, version 16.0
    [ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.911] (**) Option "Device" "/dev/input/event9"
    [ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 38.911] (**) Option "TapButton1" "1"
    [ 38.911] (**) Option "TapButton2" "2"
    [ 38.911] (**) Option "TapButton3" "3"
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    [ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    The /var/log/Xorg.0.log when using nv:
    [ 52.162]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 52.163] X Protocol Version 11, Revision 0
    [ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 52.165] Build Date: 30 May 2012 07:24:13PM
    [ 52.165]
    [ 52.165] Current version of pixman: 0.26.0
    [ 52.166] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
    [ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
    [ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 52.168] (==) No Layout section. Using the first Screen section.
    [ 52.168] (==) No screen section available. Using defaults.
    [ 52.168] (**) |-->Screen "Default Screen Section" (0)
    [ 52.168] (**) | |-->Monitor "<default monitor>"
    [ 52.168] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 52.168] (**) | |-->Device "Device0"
    [ 52.168] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 52.169] (==) Automatically adding devices
    [ 52.169] (==) Automatically enabling devices
    [ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 52.169] Entry deleted from font path.
    [ 52.169] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 52.169] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 52.169] (II) Loader magic: 0x7c58e0
    [ 52.169] (II) Module ABI versions:
    [ 52.169] X.Org ANSI C Emulation: 0.4
    [ 52.169] X.Org Video Driver: 12.0
    [ 52.169] X.Org XInput driver : 16.0
    [ 52.169] X.Org Server Extension : 6.0
    [ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 52.170] (II) LoadModule: "extmod"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 52.170] (II) Module extmod: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension MIT-SCREEN-SAVER
    [ 52.170] (II) Loading extension XFree86-VidModeExtension
    [ 52.170] (II) Loading extension XFree86-DGA
    [ 52.170] (II) Loading extension DPMS
    [ 52.170] (II) Loading extension XVideo
    [ 52.170] (II) Loading extension XVideo-MotionCompensation
    [ 52.170] (II) Loading extension X-Resource
    [ 52.170] (II) LoadModule: "dbe"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 52.170] (II) Module dbe: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension DOUBLE-BUFFER
    [ 52.170] (II) LoadModule: "glx"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
    [ 52.180] compiled for 4.0.2, module version = 1.0.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 52.180] (II) Loading extension GLX
    [ 52.180] (II) LoadModule: "record"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 52.180] (II) Module record: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.13.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension RECORD
    [ 52.180] (II) LoadModule: "dri"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 52.180] (II) Module dri: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.0.0
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension XFree86-DRI
    [ 52.180] (II) LoadModule: "dri2"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 52.181] (II) Module dri2: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.2, module version = 1.2.0
    [ 52.181] ABI class: X.Org Server Extension, version 6.0
    [ 52.181] (II) Loading extension DRI2
    [ 52.181] (II) LoadModule: "nv"
    [ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [ 52.181] (II) Module nv: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.0.901, module version = 2.1.18
    [ 52.181] Module class: X.Org Video Driver
    [ 52.181] ABI class: X.Org Video Driver, version 12.0
    [ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
    GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
    GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
    GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
    Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
    Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
    GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
    GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
    GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
    GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
    Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
    GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
    GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
    GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
    GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
    Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
    GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
    GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
    Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
    Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
    GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
    GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
    GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
    ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
    GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
    GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
    GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
    GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
    NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
    GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
    Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
    GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
    GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
    GeForce GTS 360M, Quadro FX 1800M
    [ 52.183] (--) using VT number 7
    [ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
    [ 52.211] (II) Loading sub module "int10"
    [ 52.211] (II) LoadModule: "int10"
    [ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 52.233] (II) Module int10: vendor="X.Org Foundation"
    [ 52.233] compiled for 1.12.2, module version = 1.0.0
    [ 52.233] ABI class: X.Org Video Driver, version 12.0
    [ 52.233] (II) NV(0): Initializing int10
    [ 52.234] (II) NV(0): Bad V_BIOS checksum
    [ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
    [ 52.234] (--) NV(0): Console is VGA mode 0x105
    [ 52.234] (II) NV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
    [ 52.234] (==) NV(0): RGB weight 888
    [ 52.234] (==) NV(0): Default visual is TrueColor
    [ 52.235] (==) NV(0): Using hardware cursor
    [ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
    [ 52.245] (--) NV(0): Total video RAM: 512.0 MB
    [ 52.245] (--) NV(0): BAR1 size: 256.0 MB
    [ 52.245] (--) NV(0): Mapped memory: 256.0 MB
    [ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
    [ 52.317] (II) Loading sub module "i2c"
    [ 52.317] (II) LoadModule: "i2c"
    [ 52.317] (II) Module "i2c" already built-in
    [ 52.317] (II) Loading sub module "ddc"
    [ 52.317] (II) LoadModule: "ddc"
    [ 52.317] (II) Module "ddc" already built-in
    [ 52.317] (--) NV(0): Connector map:
    [ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
    [ 52.317] (--) NV(0): Bus 0 -> DAC1
    [ 52.317] (--) NV(0): Bus 8 -> SOR3
    [ 52.317] (--) NV(0): Load detection: 340
    [ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
    [ 52.317] (II) NV(0): Output VGA1 has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
    [ 52.317] (II) NV(0): Output DVI3 has no monitor section
    [ 52.317] (II) NV(0): LVDS native size 1366x768
    [ 52.317] (II) NV(0): Output LVDS has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
    [ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
    [ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
    [ 52.321] (II) NV(0): ... none found
    [ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
    [ 52.366] (II) NV(0): EDID for output VGA1
    [ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
    [ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
    [ 52.370] (II) NV(0): ... none found
    [ 52.370] (II) NV(0): EDID for output DVI3
    [ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
    [ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
    [ 52.422] (--) NV(0): DDC detected a DFP:
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID for output LVDS
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
    [ 52.422] (II) NV(0): Printing probed modes for output LVDS
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (II) NV(0): Output VGA1 disconnected
    [ 52.422] (II) NV(0): Output DVI3 disconnected
    [ 52.422] (II) NV(0): Output LVDS connected
    [ 52.422] (II) NV(0): Using exact sizes for initial modes
    [ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
    [ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
    [ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (==) NV(0): DPI set to (96, 96)
    [ 52.422] (II) Loading sub module "fb"
    [ 52.422] (II) LoadModule: "fb"
    [ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 52.447] (II) Module fb: vendor="X.Org Foundation"
    [ 52.447] compiled for 1.12.2, module version = 1.0.0
    [ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 52.447] (II) Loading sub module "xaa"
    [ 52.447] (II) LoadModule: "xaa"
    [ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
    [ 52.458] (II) Module xaa: vendor="X.Org Foundation"
    [ 52.458] compiled for 1.12.2, module version = 1.2.1
    [ 52.458] ABI class: X.Org Video Driver, version 12.0
    [ 52.458] (II) Loading sub module "ramdac"
    [ 52.458] (II) LoadModule: "ramdac"
    [ 52.458] (II) Module "ramdac" already built-in
    [ 52.458] (--) Depth 24 pixmap format is 32 bpp
    [ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
    [ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    [ 52.507] Screen to screen bit blits
    [ 52.507] Solid filled rectangles
    [ 52.507] 8x8 mono pattern filled rectangles
    [ 52.507] Indirect CPU to Screen color expansion
    [ 52.507] Solid Lines
    [ 52.507] Scanline Image Writes
    [ 52.508] Setting up tile and stipple cache:
    [ 52.508] 32 128x128 slots
    [ 52.508] 32 256x256 slots
    [ 52.508] 16 512x512 slots
    [ 52.508] (==) NV(0): Backing store disabled
    [ 52.508] (==) NV(0): Silken mouse enabled
    [ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 52.508] (==) NV(0): DPMS enabled
    [ 55.081] (--) RandR disabled
    [ 55.081] (II) Initializing built-in extension Generic Event Extension
    [ 55.081] (II) Initializing built-in extension SHAPE
    [ 55.081] (II) Initializing built-in extension MIT-SHM
    [ 55.081] (II) Initializing built-in extension XInputExtension
    [ 55.081] (II) Initializing built-in extension XTEST
    [ 55.081] (II) Initializing built-in extension BIG-REQUESTS
    [ 55.081] (II) Initializing built-in extension SYNC
    [ 55.081] (II) Initializing built-in extension XKEYBOARD
    [ 55.081] (II) Initializing built-in extension XC-MISC
    [ 55.081] (II) Initializing built-in extension SECURITY
    [ 55.081] (II) Initializing built-in extension XINERAMA
    [ 55.081] (II) Initializing built-in extension XFIXES
    [ 55.081] (II) Initializing built-in extension RENDER
    [ 55.081] (II) Initializing built-in extension RANDR
    [ 55.081] (II) Initializing built-in extension COMPOSITE
    [ 55.081] (II) Initializing built-in extension DAMAGE
    [ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    [ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
    [ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.715] (II) LoadModule: "evdev"
    [ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 55.725] (II) Module evdev: vendor="X.Org Foundation"
    [ 55.725] compiled for 1.12.0, module version = 2.7.0
    [ 55.725] Module class: X.Org XInput Driver
    [ 55.725] ABI class: X.Org XInput driver, version 16.0
    [ 55.725] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.725] (**) Power Button: always reports core events
    [ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.725] (--) evdev: Power Button: Found keys
    [ 55.725] (II) evdev: Power Button: Configuring as keyboard
    [ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 55.725] (**) Option "xkb_rules" "evdev"
    [ 55.725] (**) Option "xkb_model" "evdev"
    [ 55.725] (**) Option "xkb_layout" "se"
    [ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
    [ 55.918] (**) Video Bus: always reports core events
    [ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 55.918] (--) evdev: Video Bus: Found keys
    [ 55.918] (II) evdev: Video Bus: Configuring as keyboard
    [ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 55.918] (**) Option "xkb_rules" "evdev"
    [ 55.918] (**) Option "xkb_model" "evdev"
    [ 55.918] (**) Option "xkb_layout" "se"
    [ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.919] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.919] (**) Power Button: always reports core events
    [ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.919] (--) evdev: Power Button: Found keys
    [ 55.919] (II) evdev: Power Button: Configuring as keyboard
    [ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 55.919] (**) Option "xkb_rules" "evdev"
    [ 55.919] (**) Option "xkb_model" "evdev"
    [ 55.919] (**) Option "xkb_layout" "se"
    [ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 55.920] (II) No input driver specified, ignoring this device.
    [ 55.920] (II) This device may have been added with another device file.
    [ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 55.921] (**) Sleep Button: always reports core events
    [ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 55.921] (--) evdev: Sleep Button: Found keys
    [ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
    [ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 55.921] (**) Option "xkb_rules" "evdev"
    [ 55.921] (**) Option "xkb_model" "evdev"
    [ 55.921] (**) Option "xkb_layout" "se"
    [ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 55.922] (II) No input driver specified, ignoring this device.
    [ 55.922] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 55.924] (II) No input driver specified, ignoring this device.
    [ 55.924] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.924] (**) Logitech USB Receiver: always reports core events
    [ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 55.926] (II) No input driver specified, ignoring this device.
    [ 55.926] (II) This device may have been added with another device file.
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.927] (**) Logitech USB Receiver: always reports core events
    [ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found keys
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 55.927] (**) USB 2.0 PC Camera: always reports core events
    [ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
    [ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 55.929] (**) Option "xkb_rules" "evdev"
    [ 55.929] (**) Option "xkb_model" "evdev"
    [ 55.929] (**) Option "xkb_layout" "se"
    [ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 55.929] (II) LoadModule: "synaptics"
    [ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
    [ 55.967] compiled for 1.12.1, module version = 1.6.1
    [ 55.967] Module class: X.Org XInput Driver
    [ 55.967] ABI class: X.Org XInput driver, version 16.0
    [ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.967] (**) Option "Device" "/dev/input/event9"
    [ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 55.968] (**) Option "TapButton1" "1"
    [ 55.968] (**) Option "TapButton2" "2"
    [ 55.968] (**) Option "TapButton3" "3"
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 55.969] (II) No input driver specified, ignoring this device.
    [ 55.969] (II) This device may have been added with another device file.
    [ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 55.970] (II) No input driver specified, ignoring this device.
    [ 55.970] (II) This device may have been added with another device file.
    From what I can tell it is something with the nvidia driver that doesn't play well with xorg.  Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
    Last edited by Larsson (2012-06-13 18:59:43)

    Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or  NV-GLX that slows it down. Any suggestions on how I can speed this up?
    ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM.  But I don't think this is the problem?

  • [FIXED BUT NOT SOLVED] NVIDIA - Desktop shifted left off the screen...

    Hello Community!
    For a pretty long time right now, I am trying to fix the video setup of my HTPC but without success. Because I'am run out of ideas, I really need Your help.
    PROBLEM:
    The desktop is shifted left off the screen, round about 100 Pixel.
    It started some time in the past, while upgrading a one year old Ubuntu installation (NVDIA drivers). Because I couldn't fix it and also wanted to replace Ubuntu with ArchLinux, I performed a clean ArchLinux installation.
    First I used the nouveau drivers ending up with the same problem. I read an configured using xrandr and cvt, but with no success. 
    So I restored the system to a snapshot taken before X11 and nouveau drivers installations, thank's BTRFS, and installed the proprietary NVIDIA drivers ending up with the same problems. Again I tried all the tips and tricks found in the documentations and forums, used nvidia-xconfig, hand crafted the xorg.conf all with no success.
    HARDWARE
    The system is a MSI Media Live (http://www.msi.com/product/desktop/Media-Live.html)
    . Support AMDR Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package
    . North Bridge: nVidia® C51PVG Chipset
    . South Bridge: nVidia® MCP51 Chipset
    . Graphics is Integrated NVIDIA GPU GeForce 6150 LE
    . VGA, SCART and HDMI - Connectors
    The display Problem is on VGA and HDMI now, where in the past the VGA was perfect. Therefor I connected and used the VGA port only, in all tests.
    INSTALLATION HISTORY
    2012-12-30 + Installation according ArchLinux install guide
    2012-12-31 + pacman -S openssh
    systemctl start sshd
    2012-12-31 + pacman -S btrfs-progs
    2012-12-31 pacman -S sudo
    2012-12-31 + sudo pacman -S bash-completion
    2013-01-03 + pacman -S rsync wget gptfdisk
    2013-01-10 + pacman -Suy nvidia-304xx
    2013-01-10 + pacman -Syu nvidia-304xx-utils
    2013-01-10 + pacman -S xorg-server xorg-xinit xorg-server-utils
    2013-01-10 + pacman -S mesa
    2013-01-10 + pacman -S xorg-twm xorg-xclock xterm
    2013-01-10 + pacman -S ttf-dejavu
    2013-01-10 + pacman -Suy lxdm
    2013-01-10 + systemctl enable lxdm.service
    2013-01-10 + pacman -S xorg-xdpyinfo
    2013-01-10 + pacman -S pkgtools
    2013-01-10 + pacman -S pkgfile
    2013-01-10 + pacman -S bc
    As You can see, I installed only a minimal X11 environment for test. The lxdm display manger shows up but with very small font and shifted to the left. Only if I force a resolution of 1024x768 the image is centered on screen/tv but still the very small font. Obviously not a solution for a HTPC.
    Here are the xorg.conf and the Xorg.0.log of my last test configuration.
    xorg.xonf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 100 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    In the Section "ServerLayout" I modified the line
         Screen      0  "Screen0" 100 0
    by adding the 100 0 at the end.
    Xorg.0.log
    [ 12.997]
    X.Org X Server 1.13.1
    Release Date: 2012-12-13
    [ 12.997] X Protocol Version 11, Revision 0
    [ 12.997] Build Operating System: Linux 3.7.0-1-ARCH x86_64
    [ 12.997] Current Operating System: Linux media-pc 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
    [ 12.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f1f870d-ccaa-4bc2-b149-1792f0c69fce
    [ 12.997] Build Date: 16 December 2012 04:45:14PM
    [ 12.997]
    [ 12.997] Current version of pixman: 0.28.2
    [ 12.997] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 12.997] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 12.998] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 13:18:12 2013
    [ 13.065] (==) Using config file: "/etc/X11/xorg.conf"
    [ 13.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 13.066] (==) ServerLayout "Layout0"
    [ 13.066] (**) |-->Screen "Screen0" (0)
    [ 13.066] (**) | |-->Monitor "Monitor0"
    [ 13.066] (**) | |-->Device "Device0"
    [ 13.066] (**) |-->Input Device "Keyboard0"
    [ 13.066] (**) |-->Input Device "Mouse0"
    [ 13.066] (==) Automatically adding devices
    [ 13.066] (==) Automatically enabling devices
    [ 13.066] (==) Automatically adding GPU devices
    [ 13.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 13.213] Entry deleted from font path.
    [ 13.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 13.213] Entry deleted from font path.
    [ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 13.222] Entry deleted from font path.
    [ 13.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 13.223] Entry deleted from font path.
    [ 13.223] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 13.223] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 13.223] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 13.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 13.223] (WW) Disabling Keyboard0
    [ 13.223] (WW) Disabling Mouse0
    [ 13.223] (II) Loader magic: 0x7fcc40
    [ 13.223] (II) Module ABI versions:
    [ 13.223] X.Org ANSI C Emulation: 0.4
    [ 13.223] X.Org Video Driver: 13.1
    [ 13.223] X.Org XInput driver : 18.0
    [ 13.223] X.Org Server Extension : 7.0
    [ 13.226] (--) PCI:*(0:0:5:0) 10de:0241:1462:3290 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
    [ 13.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 13.226] Initializing built-in extension Generic Event Extension
    [ 13.226] Initializing built-in extension SHAPE
    [ 13.226] Initializing built-in extension MIT-SHM
    [ 13.226] Initializing built-in extension XInputExtension
    [ 13.227] Initializing built-in extension XTEST
    [ 13.227] Initializing built-in extension BIG-REQUESTS
    [ 13.227] Initializing built-in extension SYNC
    [ 13.227] Initializing built-in extension XKEYBOARD
    [ 13.227] Initializing built-in extension XC-MISC
    [ 13.227] Initializing built-in extension SECURITY
    [ 13.227] Initializing built-in extension XINERAMA
    [ 13.227] Initializing built-in extension XFIXES
    [ 13.227] Initializing built-in extension RENDER
    [ 13.227] Initializing built-in extension RANDR
    [ 13.227] Initializing built-in extension COMPOSITE
    [ 13.227] Initializing built-in extension DAMAGE
    [ 13.227] Initializing built-in extension MIT-SCREEN-SAVER
    [ 13.227] Initializing built-in extension DOUBLE-BUFFER
    [ 13.227] Initializing built-in extension RECORD
    [ 13.227] Initializing built-in extension DPMS
    [ 13.227] Initializing built-in extension X-Resource
    [ 13.227] Initializing built-in extension XVideo
    [ 13.227] Initializing built-in extension XVideo-MotionCompensation
    [ 13.227] Initializing built-in extension XFree86-VidModeExtension
    [ 13.227] Initializing built-in extension XFree86-DGA
    [ 13.227] Initializing built-in extension XFree86-DRI
    [ 13.227] Initializing built-in extension DRI2
    [ 13.227] (II) LoadModule: "glx"
    [ 13.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 15.559] (II) Module glx: vendor="NVIDIA Corporation"
    [ 15.559] compiled for 4.0.2, module version = 1.0.0
    [ 15.559] Module class: X.Org Server Extension
    [ 15.559] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
    [ 15.560] Loading extension GLX
    [ 15.560] (II) LoadModule: "nvidia"
    [ 15.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 15.868] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 15.868] compiled for 4.0.2, module version = 1.0.0
    [ 15.868] Module class: X.Org Video Driver
    [ 15.868] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
    [ 15.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 15.868] (++) using VT number 7
    [ 15.875] (II) Loading sub module "fb"
    [ 15.875] (II) LoadModule: "fb"
    [ 15.984] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.008] (II) Module fb: vendor="X.Org Foundation"
    [ 16.008] compiled for 1.13.1, module version = 1.0.0
    [ 16.008] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.008] (II) Loading sub module "wfb"
    [ 16.008] (II) LoadModule: "wfb"
    [ 16.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.025] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.025] compiled for 1.13.1, module version = 1.0.0
    [ 16.025] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.025] (II) Loading sub module "ramdac"
    [ 16.025] (II) LoadModule: "ramdac"
    [ 16.025] (II) Module "ramdac" already built-in
    [ 16.025] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.025] (==) NVIDIA(0): RGB weight 888
    [ 16.025] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.025] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 16.026] (**) NVIDIA(0): Enabling 2D acceleration
    [ 19.582] (II) NVIDIA(GPU-0): Display (Acer AT3220 (CRT-0)) does not support NVIDIA 3D
    [ 19.582] (II) NVIDIA(GPU-0): Vision stereo.
    [ 19.584] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
    [ 19.584] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 19.584] (--) NVIDIA(0): VideoBIOS: 05.51.28.56.19
    [ 19.584] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 19.584] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
    [ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0) (connected)
    [ 19.584] (--) NVIDIA(0): TV-0
    [ 19.584] (--) NVIDIA(0): DFP-0
    [ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0): 350.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): TV encoder: (null)
    [ 19.585] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
    [ 19.585] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
    [ 19.585] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 19.585] (**) NVIDIA(0): device Acer AT3220 (CRT-0) (Using EDID frequencies has
    [ 19.585] (**) NVIDIA(0): been enabled on all display devices.)
    [ 19.585] (==) NVIDIA(0):
    [ 19.585] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 19.585] (==) NVIDIA(0): will be used as the requested mode.
    [ 19.585] (==) NVIDIA(0):
    [ 19.585] (II) NVIDIA(0): Validated MetaModes:
    [ 19.585] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
    [ 19.585] (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
    [ 19.587] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
    [ 19.588] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
    [ 19.589] (--) NVIDIA(0): DPI set to (49, 48); computed from "UseEdidDpi" X config
    [ 19.589] (--) NVIDIA(0): option
    [ 19.589] (--) Depth 24 pixmap format is 32 bpp
    [ 19.599] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 19.599] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 19.599] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 19.599] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 19.599] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 19.599] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 19.599] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 19.599] (II) NVIDIA(0): Config Options in the README.
    [ 19.599] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
    [ 19.754] Loading extension NV-GLX
    [ 19.797] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 19.797] (==) NVIDIA(0): Backing store disabled
    [ 19.797] (==) NVIDIA(0): Silken mouse enabled
    [ 19.798] (**) NVIDIA(0): DPMS enabled
    [ 19.798] Loading extension NV-CONTROL
    [ 19.799] Loading extension XINERAMA
    [ 19.799] (II) Loading sub module "dri2"
    [ 19.799] (II) LoadModule: "dri2"
    [ 19.799] (II) Module "dri2" already built-in
    [ 19.799] (II) NVIDIA(0): [DRI2] Setup complete
    [ 19.799] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 19.799] (--) RandR disabled
    [ 19.817] (II) Initializing extension GLX
    [ 20.522] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    only removed the input detection stuff
    Question
    How can I shift the display to the right?
    Many thanks for any hints.
    rale
    Last edited by rale (2013-01-19 11:46:14)

    Mr.Elendig wrote:Switch to dvi/hdmi if you can. Else you have to play with screen calibration etc.
    Thank You Mr.Elendig!
    The simplest answer often is best. After I connected a TFT display, instead of my TV, I was able to calibrate the screen output and got the desktop shifted. Knowing that, I tried the settings of my TV again. There is a hard to find option for calibration wich is set to automatic but doesn't do it. Trying to turn it of did the trick. Even the option stays on automatic and even the display format is fixed to 4:3 instead of 16:9, finaly the TV adjusted the display correctly.
    None the less, the problem not to be able to shift the desktop using the screen paramters in xorg.conf remains.
    Thanks
    rale

  • [SOLVED Noob question about web server permissions

    Hi I have setup up succesfully my web server. Now I am having some permission's questions/problems.
    First of all, I want the /home/httpd/home folder not to be show to the other machine users and only to root.
    I have created a user www-data and I have conf the apache file.
    This is my settings:
    My server directory is: /home/httpd and the permissions I have set:
    home dir:
    ~edited because solved~
    I have set .htaccess to some folders. I don't know If the permissions are safe or not. Can you help me?
    I think that I have different permissions to files and different to the folders...
    Thank you!
    Edited:
    And an example of my permission (phpMyAdmin):
    ~edited because solved~
    Last edited by k3rn31 (2008-02-28 22:26:09)

    This is more of a chat item for me, if you feel like it you can find me most of the time here at http://zaxter.org/xmpp.html if you have flash you can join via a simple click on connect.
    Sorry I've not been of much help to you.

  • [SOLVED] Weird question: pacman -Syu nothing to do for quite a while

    Hi,
    Perhaps this an odd question but I feel like for the past 2-3 weeks on two different computers "pacman -Syu" returns "x up to date" for all repos and "nothing to do" as the result. Could nothing really be upgradeable for this long? Can anyone else confirm this or has something gotten goofed? Is there a way to check actual versions with what I have to make sure things really are working properly? Even if nothing was upgradeable I can't remember the last time I saw core, extra, or community actually download without doing "pacman -Syyu". They alway say up to date and I'm thinking this just can't be correct...
    What might help for me to post? I haven't changed anything in pacman.conf or pacman.d/mirrorlist...
    Thanks,
    John
    Last edited by jwhendy (2010-09-02 14:20:53)

    x33a wrote:
    In the future, take a look here:
    https://www.archlinux.de/?page=MirrorStatus
    That's the link I keep losing. Bookmarking now...
    @jwhendy can you change the subject to include the word [SOLVED], please?

  • [SOLVED] NVIDIA driver conflict after upgrade

    First of all, Its nice to be here. I'm a new arch user. So please excuse me if this has been discussed before. I searched the forum , i seem to have this problem https://bbs.archlinux.org/viewtopic.php?id=156666 but the information in the thread did not solve my issue.
    When i do an upgrade i get the following message.
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    :: libgl and nvidia-304xx-utils are in conflict. Remove nvidia-304xx-utils? [y/N]
    If i say yes
    error: failed to prepare transaction (could not satisfy dependencies)
    :: lib32-nvidia-304xx-utils: requires nvidia-304xx-utils
    :: nvidia-304xx: requires nvidia-304xx-utils=304.64
    UNAME
    [sam@archetype ~]$ uname -a
    Linux archetype 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64 GNU/Linux
    Also, I'm running an Nvidia 7300LE with nvidia-304xx driver. I'm on a x64 system.
    Thanks in advance,
    Skotadi
    Last edited by skotadi (2013-01-27 08:39:02)

    skotadi wrote:I'm sorry glxinfo isn't working for me even after installing mesa package.
    You didn't have mesa before?!
    For a newbie what was the reason to omit this part of the Beginners Guide:
    Install mesa for 3D support:
    # pacman -S mesa
    Anyway, glxinfo is inside of a package called mesa-demos (it takes 5 seconds to google it).
    Did you removed nouveau as I implied earlier?
    Am I getting this right: Arch was working for you since october and something broke in recent days? If so you should have blind idea what could be the reason. Did you changed anything recently? It happened after system upgrade? But first things first: remove nouveau completely  (and maybe reinstall nvidia to see what pacman will say about it). Better yet read some of many threads about it. Most notably this one And for christ sake don't use --force switch or I won't be trying to help you anymore.
    Last edited by masteryod (2013-01-26 17:55:30)

  • [SOLVED] nVidia 87.76 Drivers installer fails to build kernel module

    Hey,
    I have a nVidia GeForce2 Integrated graphics card on my Asus A7N266 motherboard. According to the nVidia site, http://www.nvidia.com/object/IO_32667.html, the most recent driver that supports this is the 96.xx series. Yet as shown here, http://www.nvnews.net/vbulletin/showthread.php?t=87332, many people have found that the 96.xx series drivers cause graphical corruption when using a GeForce2 IGP.
    Before coming to Arch, I had used Xubuntu 7.04 and managed to compile the last known working drivers, version 87.76, following the instructions here: http://kmandla.wordpress.com/2007/03/25 … 20-12-386/
    That all went well but now I'm using Arch. I tried using the nvidia-96.xx driver in the repos just for testing sake but I still got the same graphical corruption.
    Thus I have been trying to install the 87.76 drivers on Arch, but it always fails at the kernel module building stage. I had first applied this patch here, http://www.nvnews.net/vbulletin/showthr … ost1086669, before compling as the plain driver wont compile against recent kernels.
    Here is the output from the installer:
    nvidia-installer log file '/var/log/nvidia-installer.log'
    creation time: Sun Aug 5 11:57:53 2007
    option status:
    license pre-accepted : false
    update : false
    force update : false
    expert : false
    uninstall : false
    driver info : false
    precompiled interfaces : true
    no ncurses color : false
    query latest version : false
    OpenGL header files : true
    no questions : false
    silent : false
    no recursion : false
    no backup : false
    kernel module only : false
    sanity : false
    add this kernel : false
    no runlevel check : false
    no network : false
    no ABI note : false
    no RPMs : false
    no kernel module : false
    force SELinux : default
    force tls : (not specified)
    X install prefix : (not specified)
    X library install path : (not specified)
    X module install path : (not specified)
    OpenGL install prefix : (not specified)
    OpenGL install libdir : (not specified)
    utility install prefix : (not specified)
    utility install libdir : (not specified)
    doc install prefix : (not specified)
    kernel name : (not specified)
    kernel include path : (not specified)
    kernel source path : (not specified)
    kernel output path : (not specified)
    kernel install path : (not specified)
    proc mount point : /proc
    ui : (not specified)
    tmpdir : /tmp
    ftp mirror : ftp://download.nvidia.com
    RPM file list : (not specified)
    Using: nvidia-installer ncurses user interface
    -> License accepted.
    -> No precompiled kernel interface was found to match your kernel; would you li
    ke the installer to attempt to download a kernel interface for your kernel f
    rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
    -> No matching precompiled kernel interface was found on the NVIDIA ftp site;
    this means that the installer will need to compile a kernel interface for
    your kernel.
    -> Performing CC sanity check with CC="cc".
    -> Performing CC version check with CC="cc".
    -> Kernel source path: '/lib/modules/2.6.22-ARCH/build'
    -> Kernel output path: '/lib/modules/2.6.22-ARCH/build'
    -> Performing rivafb check.
    -> Performing nvidiafb check.
    -> Cleaning kernel module build directory.
    executing: 'cd ./usr/src/nv; make clean'...
    rm -f -f nv.o nv-vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o nv.o nv
    -vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o nvidia.mod.o
    rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags}
    rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~
    rm -f -f stprof stprof.o symtab.h
    rm -f -rf .tmp_versions
    -> Building kernel module:
    executing: 'cd ./usr/src/nv; make module SYSSRC=/lib/modules/2.6.22-ARCH/bui
    ld SYSOUT=/lib/modules/2.6.22-ARCH/build'...
    NVIDIA: calling KBUILD...
    make CC=cc KBUILD_VERBOSE=1 -C /lib/modules/2.6.22-ARCH/build SUBDIRS=/home
    /kris/Source/nVidia GLX 87.76 Driver/NVIDIA-Linux-x86-1.0-8776-pkg1/usr/src/
    nv modules
    test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
    echo; \
    echo " ERROR: Kernel configuration is invalid."; \
    echo " include/linux/autoconf.h or include/config/auto.conf are mis
    sing."; \
    echo " Run 'make oldconfig && make prepare' on kernel src to fix it
    echo; \
    /bin/false)
    make[2]: *** No rule to make target `GLX'. Stop.
    NVIDIA: left KBUILD.
    nvidia.ko failed to build!
    make[1]: *** [mdl] Error 1
    make: *** [module] Error 2
    -> Error.
    ERROR: Unable to build the NVIDIA kernel module.
    ERROR: Installation has failed. Please see the file
    '/var/log/nvidia-installer.log' for details. You may find suggestions
    on fixing installation problems in the README available on the Linux
    driver download page at www.nvidia.com.
    Any ideas as to how I can get the kernel module to build?
    I am using 'kernel26 2.6.22.1-4' with the 'kernel-headers 2.6.22.1-1' from the testing repo.
    Last edited by Nameless One (2007-08-10 07:08:38)

    make CC=cc  KBUILD_VERBOSE=1 -C /lib/modules/2.6.22-ARCH/buildSUBDIRS=/home/kris/Source/nVidia GLX 87.76 Driver/NVIDIA-Linux-x86-1.0-8776-pkg1/usr/src/
    The name of the directory you placed the driver in contains spaces. That is  why you get the no rule to make target GLX error.
    It would be better not to circumvent pacman. I am using the following PKGBUILDs for the 8776 driver:
    nvidia-8776:
    pkgname=nvidia-8776
    pkgver=1.0.8776
    _nver=1.0-8776
    _kernver='2.6.22-ARCH'
    pkgrel=1
    pkgdesc="NVIDIA drivers for Arch kernel."
    arch=(i686 x86_64)
    [ "$CARCH" = "i686" ] && ARCH=x86
    [ "$CARCH" = "x86_64" ] && ARCH=x86_64
    url="http://www.nvidia.com/"
    depends=(kernel26 nvidia-8776-utils)
    conflicts=('nvidia' 'nvidia-96xx' 'nvidia-71xx' 'nvidia-legacy')
    install=nvidia.install
    source=(http://download.nvidia.com/XFree86/Linux-$ARCH/${_nver}/NVIDIA-Linux-$ARCH-${_nver}-pkg0.run NVIDIA_kernel-1.0-8776-20061203.diff.txt)
    md5sums=('93ad45fe7b974a5a80348e1890f9b7c9' '70e669f06ee4881c2583261672de292a')
    [ "$CARCH" = "x86_64" ] && md5sums=('f5340e4bbce811add994b1685cdea03b' '70e669f06ee4881c2583261672de292a')
    build()
    # Extract
    cd $startdir/src/
    sh NVIDIA-Linux-$ARCH-${_nver}-pkg0.run --extract-only
    cd NVIDIA-Linux-$ARCH-${_nver}-pkg0
    # Any extra patches are applied in here...
    patch -p0 < $startdir/NVIDIA_kernel-1.0-8776-20061203.diff.txt ||return 1
    cd usr/src/nv/
    ln -s Makefile.kbuild Makefile
    make SYSSRC=/lib/modules/$_kernver/build module || return 1
    # install kernel module
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
    install -m644 nvidia.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
    sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/*.install
    Place the patch (NVIDIA_kernel-1.0-8776-20061203.diff.txt) and nvidia.install in the same directory as the PKGBUILD.
    nvidia-utils:
    pkgname=nvidia-8776-utils
    pkgver=1.0.8776
    _nver=1.0-8776
    pkgrel=1
    pkgdesc="NVIDIA drivers utilities and libraries."
    arch=(i686 x86_64)
    [ "$CARCH" = "i686" ] && ARCH=x86
    [ "$CARCH" = "x86_64" ] && ARCH=x86_64
    url="http://www.nvidia.com/"
    depends=(xorg-server)
    conflicts=('libgl' 'libgl-dri' 'ati-fglrx-utils' 'nvidia-legacy-utils' 'nvidia-71xx-utils' 'nvidia-96xx-utils')
    provides=('libgl' )
    #install=nvidia.install
    source=(http://download.nvidia.com/XFree86/Linux-$ARCH/${_nver}/NVIDIA-Linux-$ARCH-${_nver}-pkg0.run)
    md5sums=('93ad45fe7b974a5a80348e1890f9b7c9')
    [ "$CARCH" = "x86_64" ] && md5sums=('f5340e4bbce811add994b1685cdea03b')
    build()
    # override nvida install routine and do it the long way.
    cd $startdir/src/
    sh NVIDIA-Linux-${ARCH}-${_nver}-pkg0.run --extract-only
    cd NVIDIA-Linux-${ARCH}-${_nver}-pkg0/usr/
    mkdir -p $startdir/pkg/usr/{lib,bin,share/applications,share/pixmaps,man/man1}
    mkdir -p $startdir/pkg/usr/lib/xorg/modules/{extensions,drivers}
    mkdir -p $startdir/pkg/usr/share/licenses/nvidia/
    install `find lib/ -iname \*.so\*` $startdir/pkg/usr/lib/
    install lib/tls/* $startdir/pkg/usr/lib
    install share/man/man1/* $startdir/pkg/usr/man/man1/
    rm $startdir/pkg/usr/man/man1/nvidia-installer.1.gz
    install X11R6/lib/libXv* $startdir/pkg/usr/lib/
    install share/applications/nvidia-settings.desktop $startdir/pkg/usr/share/applications/
    # fix nvidia .desktop file
    sed -e 's:__UTILS_PATH__:/usr/bin:' -e 's:__PIXMAP_PATH__:/usr/share/pixmaps:' -i $startdir/pkg/usr/share/applications/nvidia-settings.desktop
    install share/pixmaps/nvidia-settings.png $startdir/pkg/usr/share/pixmaps/
    install X11R6/lib/modules/drivers/nvidia_drv.so $startdir/pkg/usr/lib/xorg/modules/drivers
    install X11R6/lib/modules/extensions/libglx.so.$pkgver $startdir/pkg/usr/lib/xorg/modules/extensions
    install -m755 bin/nvidia-{settings,xconfig,bug-report.sh} $startdir/pkg/usr/bin/
    cd $startdir/pkg/usr/lib/;
    ln -s /usr/lib/libGL.so.$pkgver libGL.so
    ln -s /usr/lib/libGL.so.$pkgver libGL.so.1
    ln -s /usr/lib/libGLcore.so.$pkgver libGLcore.so.1
    ln -s /usr/lib/libnvidia-cfg.so.$pkgver libnvidia-cfg.so.1
    ln -s /usr/lib/libnvidia-tls.so.$pkgver libnvidia-tls.so.1
    cd $startdir/pkg/usr/lib/xorg/modules/extensions;
    ln -s /usr/lib/xorg/modules/extensions/libglx.so.$pkgver libglx.so
    install $startdir/src/NVIDIA-Linux-${ARCH}-${_nver}-pkg0/LICENSE $startdir/pkg/usr/share/licenses/nvidia/
    find $startdir/pkg/usr -type d -exec chmod 755 {} \;
    # phew :)
    Last edited by kappa (2007-08-09 11:14:42)

Maybe you are looking for

  • How do I start a Wordprocessing document in P5

    I am trying to create a bookm in Pages 5, on Mavericks. The only way I see to do this at present is to use the information here, http://support.apple.com/kb/ht4168 which is the Best Practice instructions for creating an ePub. Loading the sample iknto

  • Help with left outer join

    Hi, I Have this database structure: Artist(IDA,Name,Year_b) Work(IDW,Title,IDA,IDL) City(IDL,IName,Nation) I Want to do a query that retrieve for one Artist all Works availables on database and,if present,the City where each work was realized. This S

  • Regarding loop statement

    hi, how to find whether a statement exists between loop and endloop. for eg:           loop at itab.           clear.....            endloop. want check whether clear statement exists between loop. Thanks

  • How to display tow images in a JPanel

    hello I want to display tow images at the same time in a class which extends a JPanel,and the super image is expected to move at will.But the super image is always overlaying the lower one.I have tried to call the setGlassPane() in a JFrame and it wo

  • Web page composer new element at top

    Hey, Is it possible to add a new element at the top of the page instead of under the elements that are already there. Standaard it ads the elements at the bottom but I would like them to be at the top. Thanks