[Solved] Nvidia Twinview issue

I am running 2 monitors (well technically, one is a TV, the other is a monitor) on my desktop, and every time I set up the TV using nvidia-settings for twinview, some part of the screen ends up off the TV.  The problem lies soley with the TV, and not my original monitor.  I also am running the same driver on my laptop, and it has the same issue with this TV, and another TV I have used.
Below are some images:
This is what I see.
This is a screenshot of both the monitor (left) and desktop (right).
As you can see the window on my TV is maximized, but on my screen, significant parts of it are cut off.  I have tried googling this before, and since it is happening to 2 different machines with completely different hardware (both in terms of the cards being different and the second monitors being different), I doubt it is limited to just me.  Is it just a driver issue, or am I missing something?
Last edited by cmays90 (2011-07-14 17:05:06)

It's "overscan" and is a stupidity by the TV. It thinks it's getting a TV signal, not a computer picture. On my TV, you select what kind of input is is coming in. Check for something like that, or if the tv has an overscan setting and turn it off. If not, there's an overscan setting in nvidia-settings.
A bit off-topic: A TV with a resolution of 1280x720? Haven't seen this before. TVs in Europe are either "HD-Ready" (1366x768), or "Full-HD" (1920x1080).
Last edited by Gusar (2011-07-14 16:54:13)

Similar Messages

  • [solved] Nvidia TwinView

    I have dual monitors setup with TwinView and my setup is my main monitor directly in front of me and my secondary monitor to the left.
    I can move windows across screens just fine but the problem is all my apps and windows start on the left monitor instead of my main.
    It's behaving as if it only wants to let me put my secondary monitor on the right.
    I have DFP-0 marked as primary and positioned absolute +1920+0
    I have DFP-1 position absolute +0+0
    It's after 1am and I belive I've tried every combination of settings I could think of this late.. Probably the same one more than once.
    Any idea what I'm doing wrong? I've googled and it seems I keep stumbing into 2 or 3 year old threads that dont really help much.
    Last edited by Marklar (2010-07-03 13:59:03)

    Marklar wrote:I'm not running Xinerama. I tried that first but when I did Compiz wouldn't work. I figured Xinerama was just for multiple video cards. But I Just have one video card with dual outputs.
    Xinerama is for multiple outputs, you CAN use it with a dual output (separate X screens can be joined with Xinerama or left separate). It's deprecated though so better off not touching that. As I mentioned, XineramaInfo is basically running TwinView but 'emulating' the output of Xinerama, most WMs take Xinerama output in order to make intelligent decisions on window placement (not putting everything right smack centered between your 2 screens).
    Marklar wrote:
    ngoonee wrote:The placement of windows is a WM thing, not related to TwinView (assuming you HAVE activated XineramaInfo). Go search for WM-specific help.
    But this seems to have worked. In Compiz Config there is something called Place Windows under Window Management. I activated that and played with the settings there..
    Thanks!
    You're welcome, please mark [solved].

  • I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue.

    I am suffering the overheating issue in my HP Pavilion DV2000 laptop caused by NVIDIA GPU issue. When I go to the settlement site http://www.nvidiasettlement.com , I see that the last date of filing the claim expired which was 14th of March 2011. Is there any option remaining for the solution.
    I want to get rid of this irritating overheating problem. Is there any option for replacement of NVIDIA GPU at my own cost even in some authorised service centre?
    Regards,
    Sujeet
    [email protected]
    +919266580154

    Thank you for confirming, that this can in some cases solve the overheating.
    And i agree with you,  that it is not straight forward, and people has to be carefull

  • I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

    I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • What's the perfect CHINESE FONT for iWeb to solved the Justified issue?

    Hi,
    Terible here, i'm using Chinese Font for my website...most of the Text Box were out of Justified unlike the perfect justified on English Font.
    Sorry i hope you understand what i'm trying to descript above.
    I'm wondering now, Is there any specific Chinese Font to solved the Justified issue?
    Now, everything looks fine in iWeb but when view it in Safari or any browser, there'll be out of Justified.
    Need helps and thanks!!!

    Could you provide your url so people can see what you are referring to?
    Have you tried the various Chinese fonts provided with OS X already?
    http://www.yale.edu/chinesemac/pages/fonts.html#Apple

  • I dropped my iphone 4 into the water and then i tried the rice method. The rice solved the water issue but now the screen won't work. what should i do?

    I  dropped my iphone 4 into the water and then i tried the rice method. The rice solved the water issue but now the screen won't work. what should i do?

    I guess your definition of "solved" is different from most...
    Make an appointment at the genius bar of your local Apple Store and get an out of warranty replacement.

  • Solving Centro hotsync issues without a hard reset

    I have a Centro (sprint).  I am running Windows Vista.  I cannot connect with hotsync.  Whenever I try, I get the following message -- "The connection between your handheld computer and the desktop could not be established.  Please check your setup and try again."  I went through the article referenced at the beginning of this forum and performed all the suggestions (reloaded Palm desktop 6.2, the outlook 2007 update, soft restart, etc.).  I took it to a repair center and they stated the ONLY way to fix it was to do a hard reset which would lose all info.  Since I can't hotsync, I haven't been able to backup the phone which means I'll lose everything.  I'm hoping there are some other suggestions I could try.  It seems contrary that the only way to solve a hotsync issue and save your data is to do a hard reset and lose all your data.  Thanks.
    Post relates to: Centro (Sprint)

    Is your Vista 64 bit or 32 bit? 
    Try performing a warm reset of your device... Take out the battery press and hold the UP button insert the battery while holding the UP navigator button wait until you see set date and time then release the button. Connect the phone back to the PC and try perform a hotsync.

  • How i can solve the facetime issue? I cant find it in apple store !!!!! Plaese advice me ..., iphone 5, How i can solve the facetime issue? I cant find it in apple store !!!!! Plaese advice me ..., iphone 5

    How i can solve the facetime issue? I cant find it in apple store !!!!! Plaese advice me ..., iphone 5, How i can solve the facetime issue? I cant find it in apple store !!!!! Plaese advice me ..., iphone 5

    Facetime is not in the App store. It is part of the iOS. You access Facetime on the phone via the contact section. Facetime needs to be activated in Settings. The only reason you may not have it is if you purchased the device in an area where Facetime is prohibited by law.

  • Restoring NVIDIA TwinView Firmware?

    Hi,
    I have a Quicksilver, and just flashed its NVIDIA TwinView card using Apple's 'FCode Flasher 1.1', which was supposed to allow the card to process higher resolutions.
    Now, I'm having trouble with non-Apple displays, and want to reflash the TwinView with the original firmware, but am having trouble finding it.
    Any ideas would be appreciated.
    Thanks.
    J.C.

    Hi J.C.W-
    I found a page that may contain the resources that you need to restore (?) your Geforce.
    I can't say that I have any experience with attempting such.
    Anyways, take a look at the following:
    http://www.cybercoment.com/macgeforce.htm

  • My free trial has expired a week into the trial. I have contacted support and they haven't solved the issue. Stated to use forum to solve my license issue for this computer.

    My free trial has expired a week into the trial. I have contacted support and they haven't solved the issue. Stated to use forum to solve my license issue for this computer.

    Did you have an Adobe trial running on this same computer before?  Maybe your previous trial was used for 3 weeks and then you uninstalled it?  If so, you're only eligible for a 1 week trial on this computer.
    Nancy O.

  • [SOLVED] Ongoing NVIDIA upgrade issues (TV card related?).

    [If you think this would be more appropriate in another section, feel free to move it?   I'm kind of an nvidia noob, so I thought this might be a good place to start...]
    I haven't been able to get a working X session following nvidia/kernel upgrades since last October or so.   Everytime I would upgrade the kernel and/or the nvidia driver, my X would fail.
    NVIDIA: could not open the device file /dev/nvidia0 (Input/output error)
    FATAL server error: no screens found
    (This is my "mythtv" box--so there's a hauppauge card installed--I have no idea if that's a factor.  I have a LCD monitor connected--as well as an 'old school' CRT television one room over connected....  My other box updated yesterday to the latest kernel/nvidia driver with no problems.)
    The problem box has a geforce 8400 video card in it.
    Here is my /var/log/xorg.0.log:
    [ 100.722]
    X.Org X Server 1.12.1
    Release Date: 2012-04-13
    [ 100.722] X Protocol Version 11, Revision 0
    [ 100.722] Build Operating System: Linux 3.3.1-1-ARCH i686
    [ 100.722] Current Operating System: Linux intel-arch 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686
    [ 100.722] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
    [ 100.723] Build Date: 14 April 2012 07:32:51AM
    [ 100.723]
    [ 100.723] Current version of pixman: 0.24.4
    [ 100.723] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 100.723] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 100.724] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 23 12:06:01 2012
    [ 100.724] (==) Using config file: "/etc/X11/xorg.conf"
    [ 100.724] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 100.730] (==) ServerLayout "Layout0"
    [ 100.730] (**) |-->Screen "Screen0" (0)
    [ 100.730] (**) | |-->Monitor "Monitor0"
    [ 100.730] (**) | |-->Device "Device0"
    [ 100.730] (**) |-->Input Device "Keyboard0"
    [ 100.730] (**) |-->Input Device "Mouse0"
    [ 100.730] (==) Automatically adding devices
    [ 100.731] (==) Automatically enabling devices
    [ 100.731] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 100.731] Entry deleted from font path.
    [ 100.731] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 100.731] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 100.731] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 100.731] (WW) Disabling Keyboard0
    [ 100.731] (WW) Disabling Mouse0
    [ 100.731] (II) Loader magic: 0x82215a0
    [ 100.731] (II) Module ABI versions:
    [ 100.731] X.Org ANSI C Emulation: 0.4
    [ 100.731] X.Org Video Driver: 12.0
    [ 100.731] X.Org XInput driver : 16.0
    [ 100.731] X.Org Server Extension : 6.0
    [ 100.731] (--) PCI:*(0:1:0:0) 10de:06e4:1462:1162 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
    [ 100.732] (--) PCI: (0:6:1:0) 4444:0803:0070:4000 rev 1, Mem @ 0xf4000000/67108864
    [ 100.732] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 100.732] (II) LoadModule: "extmod"
    [ 100.732] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 100.732] (II) Module extmod: vendor="X.Org Foundation"
    [ 100.732] compiled for 1.12.1, module version = 1.0.0
    [ 100.732] Module class: X.Org Server Extension
    [ 100.732] ABI class: X.Org Server Extension, version 6.0
    [ 100.732] (II) Loading extension MIT-SCREEN-SAVER
    [ 100.732] (II) Loading extension XFree86-VidModeExtension
    [ 100.732] (II) Loading extension XFree86-DGA
    [ 100.732] (II) Loading extension DPMS
    [ 100.732] (II) Loading extension XVideo
    [ 100.732] (II) Loading extension XVideo-MotionCompensation
    [ 100.732] (II) Loading extension X-Resource
    [ 100.732] (II) LoadModule: "dbe"
    [ 100.732] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 100.732] (II) Module dbe: vendor="X.Org Foundation"
    [ 100.732] compiled for 1.12.1, module version = 1.0.0
    [ 100.732] Module class: X.Org Server Extension
    [ 100.732] ABI class: X.Org Server Extension, version 6.0
    [ 100.732] (II) Loading extension DOUBLE-BUFFER
    [ 100.732] (II) LoadModule: "glx"
    [ 100.732] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 100.752] (II) Module glx: vendor="NVIDIA Corporation"
    [ 100.752] compiled for 4.0.2, module version = 1.0.0
    [ 100.752] Module class: X.Org Server Extension
    [ 100.752] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:49:54 PDT 2012
    [ 100.752] (II) Loading extension GLX
    [ 100.752] (II) LoadModule: "record"
    [ 100.752] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 100.752] (II) Module record: vendor="X.Org Foundation"
    [ 100.752] compiled for 1.12.1, module version = 1.13.0
    [ 100.752] Module class: X.Org Server Extension
    [ 100.752] ABI class: X.Org Server Extension, version 6.0
    [ 100.752] (II) Loading extension RECORD
    [ 100.752] (II) LoadModule: "dri"
    [ 100.752] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 100.752] (II) Module dri: vendor="X.Org Foundation"
    [ 100.752] compiled for 1.12.1, module version = 1.0.0
    [ 100.752] ABI class: X.Org Server Extension, version 6.0
    [ 100.752] (II) Loading extension XFree86-DRI
    [ 100.752] (II) LoadModule: "dri2"
    [ 100.752] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 100.752] (II) Module dri2: vendor="X.Org Foundation"
    [ 100.752] compiled for 1.12.1, module version = 1.2.0
    [ 100.752] ABI class: X.Org Server Extension, version 6.0
    [ 100.752] (II) Loading extension DRI2
    [ 100.752] (II) LoadModule: "nvidia"
    [ 100.753] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 100.753] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 100.753] compiled for 4.0.2, module version = 1.0.0
    [ 100.753] Module class: X.Org Video Driver
    [ 100.753] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:29:50 PDT 2012
    [ 100.753] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 100.753] (--) using VT number 7
    [ 100.773] (II) Loading sub module "fb"
    [ 100.773] (II) LoadModule: "fb"
    [ 100.774] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 100.774] (II) Module fb: vendor="X.Org Foundation"
    [ 100.774] compiled for 1.12.1, module version = 1.0.0
    [ 100.774] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 100.774] (II) Loading sub module "wfb"
    [ 100.774] (II) LoadModule: "wfb"
    [ 100.774] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 100.774] (II) Module wfb: vendor="X.Org Foundation"
    [ 100.774] compiled for 1.12.1, module version = 1.0.0
    [ 100.774] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 100.774] (II) Loading sub module "ramdac"
    [ 100.774] (II) LoadModule: "ramdac"
    [ 100.774] (II) Module "ramdac" already built-in
    [ 100.774] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 100.774] (==) NVIDIA(0): RGB weight 888
    [ 100.774] (==) NVIDIA(0): Default visual is TrueColor
    [ 100.774] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 100.774] (**) NVIDIA(0): Enabling 2D acceleration
    [ 101.451] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 101.451] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 101.451] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 101.451] (EE) NVIDIA(0): README for additional information.
    [ 101.451] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 101.451] (II) UnloadModule: "nvidia"
    [ 101.451] (II) UnloadSubModule: "wfb"
    [ 101.451] (II) UnloadSubModule: "fb"
    [ 101.451] (EE) Screen(s) found, but none have a usable configuration.
    [ 101.451]
    Fatal server error:
    [ 101.451] no screens found
    [ 101.451]
    Please consult the The X.Org Foundation support
    at [url]http://wiki.x.org[/url]
    for help.
    [ 101.451] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 101.451]
    [ 101.491] Server terminated with error (1). Closing log file.
    Here's the lspci:
    00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
    00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
    00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
    00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
    00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
    00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
    00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
    00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
    00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
    00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
    00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
    00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
    00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
    00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
    00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
    00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
    00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
    00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
    00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
    01:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS] (rev a1)
    03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
    03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    06:01.0 Multimedia video controller: Internext Compression Inc iTVC15 (CX23415) Video Decoder (rev 01)
    06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
    I deleted my dual-screen, been-working-for-years xorg.conf file and used nvidia-xconfig to generate a 'clean' one (?):
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 295.40 ([email protected]) Thu Apr 5 22:33:07 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Here's a dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
    [ 0.000000] BIOS-e820: 000000007feb0000 - 000000007fee2000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fee2000 - 000000007fef0000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F10 02/05/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7feb0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CCFFF write-protect
    [ 0.000000] CD000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f5800] f5800
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 37d20000 - 37ff0000
    [ 0.000000] Allocated new RAMDISK: 3752e000 - 377fd698
    [ 0.000000] Move RAMDISK from 0000000037d20000 - 0000000037fef697 to 3752e000 - 377fd697
    [ 0.000000] ACPI: RSDP 000f7630 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 7fee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 7fee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 7fee2180 0507F (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
    [ 0.000000] ACPI: FACS 7feb0000 00040
    [ 0.000000] ACPI: HPET 7fee7340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 7fee73c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: EUDS 7fee7480 00560 (v01 GBT 00000000 00000000)
    [ 0.000000] ACPI: TAMG 7fee79e0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
    [ 0.000000] ACPI: APIC 7fee7240 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: SSDT 7feee8a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1158MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007feb0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007feb0
    [ 0.000000] On node 0 totalpages: 523839
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f652d200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2318 pages used for memmap
    [ 0.000000] HighMem zone: 294308 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s30848 r0 d22400 u1048576
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519745
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 4191488 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007feb0)
    [ 0.000000] Memory: 2064260k/2095808k available (3773k kernel code, 31096k reserved, 1435k data, 520k init, 1186504k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af7a9 - 0xc0616400 (1435 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af7a9 (3773 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2800.076 MHz processor.
    [ 0.003334] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.49 BogoMIPS (lpj=9333586)
    [ 0.003337] pid_max: default: 32768 minimum: 301
    [ 0.006674] Security Framework initialized
    [ 0.006678] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006689] Mount-cache hash table entries: 512
    [ 0.006786] Initializing cgroup subsys cpuacct
    [ 0.006789] Initializing cgroup subsys memory
    [ 0.006795] Initializing cgroup subsys devices
    [ 0.006796] Initializing cgroup subsys freezer
    [ 0.006798] Initializing cgroup subsys net_cls
    [ 0.006799] Initializing cgroup subsys blkio
    [ 0.006820] CPU: Physical Processor ID: 0
    [ 0.006822] CPU: Processor Core ID: 0
    [ 0.006824] mce: CPU supports 6 MCE banks
    [ 0.006829] CPU0: Thermal monitoring enabled (TM2)
    [ 0.006831] using mwait in idle threads.
    [ 0.007480] ACPI: Core revision 20120111
    [ 0.009627] ftrace: allocating 16621 entries in 33 pages
    [ 0.013364] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.013717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.047931] CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a
    [ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.049997] ... version: 2
    [ 0.049997] ... bit width: 40
    [ 0.049997] ... generic registers: 2
    [ 0.049997] ... value mask: 000000ffffffffff
    [ 0.049997] ... max period: 000000007fffffff
    [ 0.049997] ... fixed-purpose events: 3
    [ 0.049997] ... event mask: 0000000700000003
    [ 0.066770] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.093344] CPU 1 irqstacks, hard=f58ec000 soft=f58ee000
    [ 0.093347] Booting Node 0, Processors #1
    [ 0.093350] smpboot cpu 1: start_ip = 9b000
    [ 0.006666] Initializing CPU#1
    [ 0.106687] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.113331] Brought up 2 CPUs
    [ 0.113334] Total of 2 processors activated (11204.98 BogoMIPS).
    [ 0.115083] devtmpfs: initialized
    [ 0.115083] PM: Registering ACPI NVS region at 7feb0000 (204800 bytes)
    [ 0.115083] NET: Registered protocol family 16
    [ 0.115083] ACPI: bus type pci registered
    [ 0.115083] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.115083] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.115083] PCI: Using MMCONFIG for extended config space
    [ 0.115083] PCI: Using configuration type 1 for base access
    [ 0.116684] bio: create slab <bio-0> at 0
    [ 0.116695] ACPI: Added _OSI(Module Device)
    [ 0.116695] ACPI: Added _OSI(Processor Device)
    [ 0.116695] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.116695] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117294] ACPI: EC: Look up EC in DSDT
    [ 0.120048] ACPI Warning: Incorrect checksum in table [TAMG] - 0xDD, should be 0xDC (20120111/tbutils-321)
    [ 0.120165] ACPI: SSDT 7feee280 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
    [ 0.120301] ACPI: Dynamic OEM Table Load:
    [ 0.120304] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
    [ 0.120421] ACPI: SSDT 7feee740 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
    [ 0.120548] ACPI: Dynamic OEM Table Load:
    [ 0.120551] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
    [ 0.120670] ACPI: Interpreter enabled
    [ 0.120684] ACPI: (supports S0 S3 S4 S5)
    [ 0.120698] ACPI: Using IOAPIC for interrupt routing
    [ 0.124256] ACPI: No dock devices found.
    [ 0.124263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.124306] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.124364] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.124366] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.124368] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.124370] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.124371] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.124373] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff]
    [ 0.124413] PCI host bridge to bus 0000:00
    [ 0.124415] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.124417] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.124418] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.124420] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.124422] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.124424] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
    [ 0.124431] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [ 0.124467] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [ 0.124499] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.124532] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [ 0.124569] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
    [ 0.124613] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [ 0.124650] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
    [ 0.124694] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [ 0.124731] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
    [ 0.124778] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [ 0.124793] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
    [ 0.124871] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [ 0.124884] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
    [ 0.124942] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.124961] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [ 0.125020] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.125041] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
    [ 0.125101] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.125120] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
    [ 0.125180] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.125200] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
    [ 0.125259] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.125280] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [ 0.125317] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
    [ 0.125361] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [ 0.125398] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
    [ 0.125442] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [ 0.125479] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
    [ 0.125526] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [ 0.125541] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
    [ 0.125617] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.125670] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
    [ 0.125743] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
    [ 0.125746] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
    [ 0.125749] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
    [ 0.125788] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
    [ 0.125801] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
    [ 0.125808] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
    [ 0.125815] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
    [ 0.125821] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
    [ 0.125828] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
    [ 0.125835] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
    [ 0.125874] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [ 0.125887] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
    [ 0.125905] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
    [ 0.125933] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
    [ 0.125946] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
    [ 0.125953] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
    [ 0.125959] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
    [ 0.125966] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
    [ 0.125973] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
    [ 0.125980] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
    [ 0.126045] pci 0000:01:00.0: [10de:06e4] type 0 class 0x000300
    [ 0.126054] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.126063] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.126073] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.126080] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
    [ 0.126086] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.126134] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.126137] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.126139] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.126143] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.126176] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.126231] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
    [ 0.126312] pci 0000:03:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
    [ 0.126371] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.126401] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
    [ 0.126423] pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
    [ 0.126436] pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
    [ 0.126448] pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
    [ 0.126461] pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
    [ 0.126473] pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
    [ 0.126551] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.126563] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
    [ 0.126566] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.126569] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.126622] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.126637] pci 0000:04:00.0: reg 10: [io 0xce00-0xceff]
    [ 0.126672] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
    [ 0.126688] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
    [ 0.126699] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.126759] pci 0000:04:00.0: supports D1 D2
    [ 0.126760] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.133342] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
    [ 0.133347] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.133352] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
    [ 0.133359] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.133422] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.133441] pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
    [ 0.133471] pci 0000:05:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
    [ 0.133492] pci 0000:05:00.0: reg 20: [mem 0xfdce0000-0xfdceffff 64bit pref]
    [ 0.133506] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.133574] pci 0000:05:00.0: supports D1 D2
    [ 0.133575] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.140007] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 0.140013] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
    [ 0.140017] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.140024] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
    [ 0.140061] pci 0000:06:01.0: [4444:0803] type 0 class 0x000400
    [ 0.140080] pci 0000:06:01.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
    [ 0.140185] pci 0000:06:07.0: [104c:8024] type 0 class 0x000c00
    [ 0.140208] pci 0000:06:07.0: reg 10: [mem 0xfdaff000-0xfdaff7ff]
    [ 0.140217] pci 0000:06:07.0: reg 14: [mem 0xfdaf8000-0xfdafbfff]
    [ 0.140279] pci 0000:06:07.0: supports D1 D2
    [ 0.140280] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
    [ 0.140315] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
    [ 0.140320] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.140324] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.140326] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.140328] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.140330] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.140332] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.140334] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
    [ 0.140336] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
    [ 0.140356] pci_bus 0000:00: on NUMA node 0
    [ 0.140358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.140506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.140544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [ 0.140585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    [ 0.140618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    [ 0.140651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.140755] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.140757] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.140759] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.149260] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [ 0.149298] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    [ 0.149337] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [ 0.149374] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.149412] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [ 0.149449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.149486] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [ 0.149523] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    [ 0.149564] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.149564] vgaarb: loaded
    [ 0.149564] vgaarb: bridge control possible 0000:01:00.0
    [ 0.149564] PCI: Using ACPI for IRQ routing
    [ 0.150832] PCI: pci_cache_line_size set to 64 bytes
    [ 0.150913] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.150915] reserve RAM buffer: 000000007feb0000 - 000000007fffffff
    [ 0.150997] NetLabel: Initializing
    [ 0.150999] NetLabel: domain hash size = 128
    [ 0.151000] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.151009] NetLabel: unlabeled traffic allowed by default
    [ 0.151013] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.151018] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.151022] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.160013] Switching to clocksource hpet
    [ 0.165167] pnp: PnP ACPI init
    [ 0.165182] ACPI: bus type pnp registered
    [ 0.165247] pnp 00:00: [bus 00-3f]
    [ 0.165250] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.165252] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.165253] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.165255] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.165257] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.165259] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.165261] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
    [ 0.165307] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.165368] pnp 00:01: [io 0x0010-0x001f]
    [ 0.165370] pnp 00:01: [io 0x0022-0x003f]
    [ 0.165372] pnp 00:01: [io 0x0044-0x004d]
    [ 0.165373] pnp 00:01: [io 0x0050-0x005f]
    [ 0.165375] pnp 00:01: [io 0x0062-0x0063]
    [ 0.165376] pnp 00:01: [io 0x0065-0x006f]
    [ 0.165378] pnp 00:01: [io 0x0074-0x007f]
    [ 0.165379] pnp 00:01: [io 0x0091-0x0093]
    [ 0.165380] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.165382] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.165383] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.165385] pnp 00:01: [io 0x0290-0x029f]
    [ 0.165386] pnp 00:01: [io 0x0800-0x0805]
    [ 0.165388] pnp 00:01: [io 0x0290-0x0294]
    [ 0.165389] pnp 00:01: [io 0x0880-0x088f]
    [ 0.165450] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.165452] system 00:01: [io 0x0290-0x029f] has been reserved
    [ 0.165454] system 00:01: [io 0x0800-0x0805] has been reserved
    [ 0.165457] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.165458] system 00:01: [io 0x0880-0x088f] has been reserved
    [ 0.165461] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.165471] pnp 00:02: [dma 4]
    [ 0.165473] pnp 00:02: [io 0x0000-0x000f]
    [ 0.165474] pnp 00:02: [io 0x0080-0x0090]
    [ 0.165476] pnp 00:02: [io 0x0094-0x009f]
    [ 0.165477] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.165503] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.165542] pnp 00:03: [irq 0 disabled]
    [ 0.165550] pnp 00:03: [irq 8]
    [ 0.165552] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.165580] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.165603] pnp 00:04: [io 0x0070-0x0073]
    [ 0.165630] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.165637] pnp 00:05: [io 0x0061]
    [ 0.165664] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.165671] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.165676] pnp 00:06: [irq 13]
    [ 0.165702] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.165792] pnp 00:07: [io 0x03f0-0x03f5]
    [ 0.165794] pnp 00:07: [io 0x03f7]
    [ 0.165798] pnp 00:07: [irq 6]
    [ 0.165799] pnp 00:07: [dma 2]
    [ 0.165836] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.165963] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.165967] pnp 00:08: [irq 4]
    [ 0.166019] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.166160] pnp 00:09: [io 0x0378-0x037f]
    [ 0.166165] pnp 00:09: [irq 7]
    [ 0.166209] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.166303] pnp 00:0a: [io 0x0400-0x04cf]
    [ 0.166305] pnp 00:0a: [io 0x04d2-0x04ff]
    [ 0.166351] system 00:0a: [io 0x0400-0x04cf] has been reserved
    [ 0.166353] system 00:0a: [io 0x04d2-0x04ff] has been reserved
    [ 0.166356] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.166501] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
    [ 0.166552] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.166555] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.166686] pnp 00:0c: [mem 0x000cdc00-0x000cffff]
    [ 0.166688] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
    [ 0.166690] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
    [ 0.166692] pnp 00:0c: [mem 0x000fc000-0x000fffff]
    [ 0.166693] pnp 00:0c: [mem 0x7feb0000-0x7fefffff]
    [ 0.166695] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.166696] pnp 00:0c: [mem 0x00100000-0x7feaffff]
    [ 0.166698] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.166700] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
    [ 0.166701] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
    [ 0.166703] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.166704] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
    [ 0.166706] pnp 00:0c: [mem 0xfff00000-0xffffffff]
    [ 0.166708] pnp 00:0c: [mem 0x000e0000-0x000effff]
    [ 0.166769] system 00:0c: [mem 0x000cdc00-0x000cffff] has been reserved
    [ 0.166772] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.166774] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.166776] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.166778] system 00:0c: [mem 0x7feb0000-0x7fefffff] could not be reserved
    [ 0.166780] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.166782] system 00:0c: [mem 0x00100000-0x7feaffff] could not be reserved
    [ 0.166784] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.166786] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
    [ 0.166788] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
    [ 0.166790] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.166792] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
    [ 0.166794] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.166796] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
    [ 0.166799] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.166814] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
    [ 0.166852] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.166856] pnp: PnP ACPI: found 14 devices
    [ 0.166857] ACPI: ACPI bus type pnp unregistered
    [ 0.203257] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.203293] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7ff00000-0x800fffff 64bit pref]
    [ 0.203296] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff]
    [ 0.203299] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
    [ 0.203302] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.203304] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.203307] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.203309] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.203312] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.203314] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.203318] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.203320] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.203324] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff]
    [ 0.203338] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff 64bit pref]
    [ 0.203343] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
    [ 0.203346] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.203349] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.203353] pci 0000:00:1c.3: bridge window [mem 0x7ff00000-0x800fffff 64bit pref]
    [ 0.203358] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
    [ 0.203360] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
    [ 0.203363] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.203366] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
    [ 0.203370] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.203375] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
    [ 0.203377] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 0.203379] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
    [ 0.203383] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.203387] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
    [ 0.203392] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
    [ 0.203396] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.203399] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.203416] pci 0000:00:1c.0: enabling device (0000 -> 0003)
    [ 0.203438] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.203441] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.203443] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.203445] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.203447] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.203448] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.203450] pci_bus 0000:00: resource 9 [mem 0x7ff00000-0xfebfffff]
    [ 0.203452] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.203454] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.203456] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.203458] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.203460] pci_bus 0000:02: resource 1 [mem 0x80100000-0x802fffff]
    [ 0.203461] pci_bus 0000:02: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
    [ 0.203463] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.203465] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
    [ 0.203467] pci_bus 0000:03: resource 2 [mem 0x7ff00000-0x800fffff 64bit pref]
    [ 0.203469] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    [ 0.203471] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
    [ 0.203473] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.203475] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
    [ 0.203476] pci_bus 0000:05: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.203478] pci_bus 0000:05: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
    [ 0.203480] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
    [ 0.203482] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.203484] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
    [ 0.203486] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
    [ 0.203487] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.203489] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.203491] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.203493] pci_bus 0000:06: resource 9 [mem 0x7ff00000-0xfebfffff]
    [ 0.203517] NET: Registered protocol family 2
    [ 0.203569] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.203733] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.204057] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.204215] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.204217] TCP reno registered
    [ 0.204219] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.204226] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.204277] NET: Registered protocol family 1
    [ 0.230046] pci 0000:01:00.0: Boot video device
    [ 0.230066] PCI: CLS 4 bytes, default 64
    [ 0.230114] Unpacking initramfs...
    [ 0.281716] Freeing initrd memory: 2880k freed
    [ 0.282813] apm: BIOS not found.
    [ 0.282997] audit: initializing netlink socket (disabled)
    [ 0.283008] type=2000 audit(1335182661.279:1): initialized
    [ 0.283290] highmem bounce pool size: 64 pages
    [ 0.283294] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.284920] VFS: Disk quotas dquot_6.5.2
    [ 0.284969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.285048] msgmni has been set to 1719
    [ 0.285189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.285213] io scheduler noop registered
    [ 0.285214] io scheduler deadline registered
    [ 0.285219] io scheduler cfq registered (default)
    [ 0.285324] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.285393] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.285471] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
    [ 0.285550] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
    [ 0.285628] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
    [ 0.285741] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
    [ 0.285742] vesafb: scrolling: redraw
    [ 0.285744] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    [ 0.285947] vesafb: framebuffer at 0xf9000000, mapped to 0xf8080000, using 2560k, total 2560k
    [ 0.305959] Console: switching to colour frame buffer device 160x64
    [ 0.325876] fb0: VESA VGA frame buffer device
    [ 0.325911] intel_idle: MWAIT substates: 0x22220
    [ 0.325912] intel_idle: does not run on family 6 model 23
    [ 0.325931] GHES: HEST is not enabled!
    [ 0.325942] isapnp: Scanning for PnP cards...
    [ 0.637859] isapnp: No Plug & Play device found
    [ 0.637909] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.658391] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.679122] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.679405] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.713326] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
    [ 0.713338] i8042: If AUX port is really absent please use the 'i8042.noaux' option
    [ 0.963424] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.963556] mousedev: PS/2 mouse device common for all mice
    [ 0.963618] rtc_cmos 00:04: RTC can wake from S4
    [ 0.963703] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.963724] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.963743] cpuidle: using governor ladder
    [ 0.963744] cpuidle: using governor menu
    [ 0.963917] TCP cubic registered
    [ 0.964022] NET: Registered protocol family 10
    [ 0.964388] NET: Registered protocol family 17
    [ 0.964392] Registering the dns_resolver key type
    [ 0.964404] Using IPI No-Shortcut mode
    [ 0.964489] PM: Hibernation image not present or could not be loaded.
    [ 0.964493] registered taskstats version 1
    [ 0.964920] rtc_cmos 00:04: setting system clock to 2012-04-23 12:04:22 UTC (1335182662)
    [ 0.964951] Initializing network drop monitor service
    [ 0.965002] Freeing unused kernel memory: 520k freed
    [ 0.965195] Write protecting the kernel text: 3776k
    [ 0.965213] Write protecting the kernel read-only data: 1108k
    [ 0.970549] udevd[37]: starting version 182
    [ 0.990063] usbcore: registered new interface driver usbfs
    [ 0.990082] usbcore: registered new interface driver hub
    [ 0.990287] usbcore: registered new device driver usb
    [ 0.990620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.990663] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.990666] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.990683] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.994584] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
    [ 0.994599] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
    [ 0.999657] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.004019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.004470] hub 1-0:1.0: USB hub found
    [ 1.004474] hub 1-0:1.0: 6 ports detected
    [ 1.004573] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.004576] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.004583] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.007266] SCSI subsystem initialized
    [ 1.008500] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
    [ 1.008516] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
    [ 1.008592] libata version 3.00 loaded.
    [ 1.009871] ahci 0000:03:00.0: version 3.0
    [ 1.016893] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.017108] hub 2-0:1.0: USB hub found
    [ 1.017111] hub 2-0:1.0: 6 ports detected
    [ 1.017203] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.017206] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.017214] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.017248] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
    [ 1.017363] hub 3-0:1.0: USB hub found
    [ 1.017367] hub 3-0:1.0: 2 ports detected
    [ 1.017433] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.017436] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.017446] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.017472] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
    [ 1.017584] hub 4-0:1.0: USB hub found
    [ 1.017587] hub 4-0:1.0: 2 ports detected
    [ 1.017652] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.017655] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.017661] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.017681] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
    [ 1.017789] hub 5-0:1.0: USB hub found
    [ 1.017792] hub 5-0:1.0: 2 ports detected
    [ 1.017858] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.017861] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.017868] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.017888] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
    [ 1.017995] hub 6-0:1.0: USB hub found
    [ 1.017998] hub 6-0:1.0: 2 ports detected
    [ 1.018064] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.018067] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.018073] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.018099] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
    [ 1.018206] hub 7-0:1.0: USB hub found
    [ 1.018212] hub 7-0:1.0: 2 ports detected
    [ 1.018278] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.018281] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.018288] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.018308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
    [ 1.018482] hub 8-0:1.0: USB hub found
    [ 1.018485] hub 8-0:1.0: 2 ports detected
    [ 1.018763] ata_piix 0000:00:1f.2: version 2.13
    [ 1.018772] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 1.018804] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.020267] scsi0 : ata_piix
    [ 1.020371] scsi1 : ata_piix
    [ 1.020819] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 1.020824] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 1.020853] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 1.020893] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 1.021136] scsi2 : ata_piix
    [ 1.021644] scsi3 : ata_piix
    [ 1.022040] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
    [ 1.022044] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
    [ 1.023372] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 1.023375] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    [ 1.023819] scsi4 : ahci
    [ 1.023884] scsi5 : ahci
    [ 1.023962] ata5: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 19
    [ 1.023965] ata6: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 19
    [ 1.024034] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
    [ 1.024063] pata_acpi 0000:03:00.1: setting latency timer to 64
    [ 1.283352] Refined TSC clocksource calibration: 2800.099 MHz.
    [ 1.283357] Switching to clocksource tsc
    [ 1.350651] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.350654] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.361316] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.361361] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.586675] usb 8-2: new full-speed USB device number 2 using uhci_hcd
    [ 1.734398] hub 8-2:1.0: USB hub found
    [ 1.736342] hub 8-2:1.0: 4 ports detected
    [ 1.826727] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.826741] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.826862] ata2.00: SATA link down (SStatus 0 SControl 300)
    [ 1.826878] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.843535] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
    [ 1.843661] ata1.01: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
    [ 1.843665] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.843832] ata2.01: HPA detected: current 1250261615, native 1250263728
    [ 1.843837] ata2.01: ATA-8: WDC WD6400AACS-00G8B1, 05.04C05, max UDMA/133
    [ 1.843841] ata2.01: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.845598] ata2.01: configured for UDMA/133
    [ 1.856788] ata1.00: configured for UDMA/100
    [ 1.863573] ata1.01: configured for UDMA/133
    [ 1.865163] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
    [ 1.865407] scsi 0:0:1:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
    [ 1.865585] scsi 1:0:1:0: Direct-Access ATA WDC WD6400AACS-0 05.0 PQ: 0 ANSI: 5
    [ 1.866092] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 1.867006] scsi6 : pata_jmicron
    [ 1.867093] scsi7 : pata_jmicron
    [ 1.867683] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
    [ 1.867686] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
    [ 1.870208] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.870244] sd 0:0:1:0: [sda] Write Protect is off
    [ 1.870247] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.870262] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.870558] sd 1:0:1:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
    [ 1.870601] sd 1:0:1:0: [sdb] Write Protect is off
    [ 1.870604] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.870620] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.915534] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
    [ 1.916012] sd 0:0:1:0: [sda] Attached SCSI disk
    [ 1.980226] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
    [ 1.980824] sd 1:0:1:0: [sdb] Attached SCSI disk
    [ 2.011343] usb 8-2.1: new full-speed USB device number 3 using uhci_hcd
    [ 2.192148] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.192152] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.192558] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.201802] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input0
    [ 2.201846] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input0
    [ 2.222475] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.1/input/input1
    [ 2.222611] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input1
    [ 2.231760] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.2/input/input2
    [ 2.231841] generic-usb 0003:046D:C318.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input2
    [ 2.231854] usbcore: registered new interface driver usbhid
    [ 2.231856] usbhid: USB HID core driver
    [ 3.342855] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.236723] udevd[150]: starting version 182
    [ 4.459170] Linux media interface: v0.10
    [ 4.475608] Linux video capture interface: v2.00
    [ 4.489322] usbcore: registered new interface driver uvcvideo
    [ 4.489323] USB Video Class driver (1.1.1)
    [ 4.496429] lirc_dev: IR Remote Control driver registered, major 250
    [ 4.513782] IR NEC protocol handler initialized
    [ 4.522116] bttv: driver version 0.9.19 loaded
    [ 4.522119] bttv: using 8 buffers with 2080k (520 pages) each for capture
    [ 4.600352] IR RC5(x) protocol handler initialized
    [ 4.608981] IR RC6 protocol handler initialized
    [ 4.630510] IR JVC protocol handler initialized
    [ 4.636561] IR Sony protocol handler initialized
    [ 4.638418] ivtv: Start initialization, version 1.4.3
    [ 4.638462] ivtv0: Initializing card 0
    [ 4.638463] ivtv0: Autodetected Hauppauge card (cx23415 based)
    [ 4.638549] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
    [ 4.644475] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 4.644481] ACPI: Power Button [PWRB]
    [ 4.644534] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 4.644537] ACPI: Power Button [PWRF]
    [ 4.658578] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 4.665780] Marking TSC unstable due to TSC halts in idle
    [ 4.666758] ACPI: acpi_idle registered with cpuidle
    [ 4.670254] Switching to clocksource hpet
    [ 4.678524] Floppy drive(s): fd0 is 1.44M
    [ 4.679479] IT8718 SuperIO detected.
    [ 4.679633] parport_pc 00:09: reported by Plug and Play ACPI
    [ 4.679676] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 4.693701] FDC 0 is a post-1991 82077
    [ 4.694860] tveeprom 0-0050: Hauppauge model 48132, rev K268, serial# 9950569
    [ 4.694863] tveeprom 0-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
    [ 4.694865] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
    [ 4.694867] tveeprom 0-0050: audio processor is MSP4448 (idx 27)
    [ 4.694869] tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
    [ 4.694871] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
    [ 4.694873] ivtv0: Autodetected Hauppauge WinTV PVR-350
    [ 4.718730] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 4.729649] ppdev: user-space parallel port driver
    [ 4.738786] Linux agpgart interface v0.103
    [ 4.820346] IR SANYO protocol handler initialized
    [ 4.822452] iTCO_vendor_support: vendor-support=0
    [ 4.823062] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 4.823136] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
    [ 4.823465] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.830152] IR MCE Keyboard/mouse protocol handler initialized
    [ 4.831105] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.831186] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
    [ 4.831566] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf9e18000, 00:24:1d:2a:98:49, XID 1c4000c0 IRQ 46
    [ 4.831569] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.831887] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.831956] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
    [ 4.832334] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xf9e1a000, 00:1f:d0:81:ab:41, XID 1c4000c0 IRQ 47
    [ 4.832337] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 4.844309] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
    [ 4.880508] IR LIRC bridge handler initialized
    [ 4.891113] hda_codec: ALC889A: BIOS auto-probing.
    [ 4.917236] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 4.917368] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 4.917483] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 4.917595] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 4.917707] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 4.917819] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 4.917933] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 4.918044] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 5.108129] saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
    [ 5.167615] i2c-core: driver [msp3400] using legacy suspend method
    [ 5.167617] i2c-core: driver [msp3400] using legacy resume method
    [ 5.178769] msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
    [ 5.178771] msp3400 0-0040: msp3400 supports radio, mode is autodetect and autoselect
    [ 5.203046] nvidia: module license 'NVIDIA' taints kernel.
    [ 5.203050] Disabling lock debugging due to kernel taint
    [ 5.218687] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.218866] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
    [ 5.298045] i2c-core: driver [tuner] using legacy suspend method
    [ 5.298047] i2c-core: driver [tuner] using legacy resume method
    [ 5.388600] tda9887 0-0043: creating new instance
    [ 5.388603] tda9887 0-0043: tda988[5/6/7] found
    [ 5.389628] tuner 0-0043: Tuner 74 found with type(s) Radio TV.
    [ 5.392437] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
    [ 5.407684] tuner-simple 0-0061: creating new instance
    [ 5.407687] tuner-simple 0-0061: type set to 47 (LG NTSC (TAPE series))
    [ 5.421350] ivtv0: Registered device video0 for encoder MPG (4096 kB)
    [ 5.421381] ivtv0: Registered device video32 for encoder YUV (2048 kB)
    [ 5.421421] ivtv0: Registered

    Progress.  Sort of...
    As I mentioned in the previous update, I unplugged the Hauppauge PVR-350 card and upgraded the kernel, lirc, lirc-utils, nvidia, and nvidia-utils.
    I found this thread ( https://bbs.archlinux.org/viewtopic.php?pid=779327 ) which suggested blacklisting nouveau--as it's built-in to the kernel now (?).   When I rebooted after blacklisting nouveau, my X started up!!
    I thought I'd solved the issue--but when I plugged the PVR-350 back in and rebooted (it's necessary to use the remote control with mythtv), X failed again:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120407 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
    [ 0.000000] BIOS-e820: 000000007feb0000 - 000000007fee2000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fee2000 - 000000007fef0000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F10 02/05/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7feb0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CCFFF write-protect
    [ 0.000000] CD000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f5800] f5800
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 37d61000 - 37ff0000
    [ 0.000000] Allocated new RAMDISK: 3756f000 - 377fd6d1
    [ 0.000000] Move RAMDISK from 0000000037d61000 - 0000000037fef6d0 to 3756f000 - 377fd6d0
    [ 0.000000] ACPI: RSDP 000f7630 00014 (v00 GBT )
    [ 0.000000] ACPI: RSDT 7fee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: FACP 7fee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: DSDT 7fee2180 0507F (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
    [ 0.000000] ACPI: FACS 7feb0000 00040
    [ 0.000000] ACPI: HPET 7fee7340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
    [ 0.000000] ACPI: MCFG 7fee73c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: EUDS 7fee7480 00560 (v01 GBT 00000000 00000000)
    [ 0.000000] ACPI: TAMG 7fee79e0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
    [ 0.000000] ACPI: APIC 7fee7240 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
    [ 0.000000] ACPI: SSDT 7feee8a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1158MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007feb0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007feb0
    [ 0.000000] On node 0 totalpages: 523839
    [ 0.000000] free_area_init_node: node 0, pgdat c060c580, node_mem_map f656e200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2318 pages used for memmap
    [ 0.000000] HighMem zone: 294308 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s30848 r0 d22400 u1048576
    [ 0.000000] pcpu-alloc: s30848 r0 d22400 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519745
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 4191488 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007feb0)
    [ 0.000000] Memory: 2064520k/2095808k available (3773k kernel code, 30836k reserved, 1435k data, 520k init, 1186504k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc0617000 - 0xc0699000 ( 520 kB)
    [ 0.000000] .data : 0xc04af7a9 - 0xc0616400 (1435 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04af7a9 (3773 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2800.335 MHz processor.
    [ 0.003334] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.03 BogoMIPS (lpj=9334450)
    [ 0.003337] pid_max: default: 32768 minimum: 301
    [ 0.003356] Security Framework initialized
    [ 0.003359] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003371] Mount-cache hash table entries: 512
    [ 0.003468] Initializing cgroup subsys cpuacct
    [ 0.003471] Initializing cgroup subsys memory
    [ 0.003477] Initializing cgroup subsys devices
    [ 0.003478] Initializing cgroup subsys freezer
    [ 0.003480] Initializing cgroup subsys net_cls
    [ 0.003481] Initializing cgroup subsys blkio
    [ 0.003502] CPU: Physical Processor ID: 0
    [ 0.003504] CPU: Processor Core ID: 0
    [ 0.003506] mce: CPU supports 6 MCE banks
    [ 0.003512] CPU0: Thermal monitoring enabled (TM2)
    [ 0.003514] using mwait in idle threads.
    [ 0.007056] ACPI: Core revision 20120111
    [ 0.009209] ftrace: allocating 16621 entries in 33 pages
    [ 0.013364] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.013718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.047518] CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a
    [ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.049997] ... version: 2
    [ 0.049997] ... bit width: 40
    [ 0.049997] ... generic registers: 2
    [ 0.049997] ... value mask: 000000ffffffffff
    [ 0.049997] ... max period: 000000007fffffff
    [ 0.049997] ... fixed-purpose events: 3
    [ 0.049997] ... event mask: 0000000700000003
    [ 0.066769] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.093344] CPU 1 irqstacks, hard=f58ec000 soft=f58ee000
    [ 0.093347] Booting Node 0, Processors #1
    [ 0.093350] smpboot cpu 1: start_ip = 9b000
    [ 0.006666] Initializing CPU#1
    [ 0.106687] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.113331] Brought up 2 CPUs
    [ 0.113334] Total of 2 processors activated (11205.06 BogoMIPS).
    [ 0.115084] devtmpfs: initialized
    [ 0.115084] PM: Registering ACPI NVS region at 7feb0000 (204800 bytes)
    [ 0.115084] NET: Registered protocol family 16
    [ 0.115084] ACPI: bus type pci registered
    [ 0.115084] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.115084] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.115084] PCI: Using MMCONFIG for extended config space
    [ 0.115084] PCI: Using configuration type 1 for base access
    [ 0.116684] bio: create slab <bio-0> at 0
    [ 0.116695] ACPI: Added _OSI(Module Device)
    [ 0.116695] ACPI: Added _OSI(Processor Device)
    [ 0.116695] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.116695] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.117294] ACPI: EC: Look up EC in DSDT
    [ 0.120049] ACPI Warning: Incorrect checksum in table [TAMG] - 0x54, should be 0x53 (20120111/tbutils-321)
    [ 0.120165] ACPI: SSDT 7feee280 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
    [ 0.120301] ACPI: Dynamic OEM Table Load:
    [ 0.120304] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
    [ 0.120421] ACPI: SSDT 7feee740 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
    [ 0.120549] ACPI: Dynamic OEM Table Load:
    [ 0.120551] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
    [ 0.120670] ACPI: Interpreter enabled
    [ 0.120684] ACPI: (supports S0 S3 S4 S5)
    [ 0.120698] ACPI: Using IOAPIC for interrupt routing
    [ 0.124257] ACPI: No dock devices found.
    [ 0.124263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.124307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
    [ 0.124364] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.124366] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.124368] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.124370] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.124372] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
    [ 0.124374] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff]
    [ 0.124414] PCI host bridge to bus 0000:00
    [ 0.124416] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.124417] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.124419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.124421] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.124423] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.124424] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
    [ 0.124432] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
    [ 0.124468] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
    [ 0.124500] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.124533] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
    [ 0.124570] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
    [ 0.124615] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
    [ 0.124652] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
    [ 0.124696] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
    [ 0.124733] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
    [ 0.124780] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
    [ 0.124795] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
    [ 0.124874] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
    [ 0.124887] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
    [ 0.124945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.124964] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
    [ 0.125023] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.125045] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604
    [ 0.125104] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.125124] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
    [ 0.125183] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.125203] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
    [ 0.125262] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.125284] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
    [ 0.125320] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
    [ 0.125365] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
    [ 0.125401] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
    [ 0.125446] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
    [ 0.125482] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
    [ 0.125530] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
    [ 0.125545] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
    [ 0.125621] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.125675] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
    [ 0.125747] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
    [ 0.125750] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
    [ 0.125753] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
    [ 0.125793] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
    [ 0.125806] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
    [ 0.125813] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
    [ 0.125820] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
    [ 0.125827] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
    [ 0.125833] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
    [ 0.125840] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
    [ 0.125880] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
    [ 0.125893] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
    [ 0.125911] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
    [ 0.125939] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
    [ 0.125952] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
    [ 0.125959] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
    [ 0.125965] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
    [ 0.125972] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
    [ 0.125979] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
    [ 0.125985] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
    [ 0.126051] pci 0000:01:00.0: [10de:06e4] type 0 class 0x000300
    [ 0.126060] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.126070] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.126079] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.126086] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
    [ 0.126093] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.126141] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.126143] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.126146] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.126149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.126182] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.126238] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
    [ 0.126319] pci 0000:03:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
    [ 0.126378] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.126407] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
    [ 0.126430] pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
    [ 0.126442] pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
    [ 0.126455] pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
    [ 0.126467] pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
    [ 0.126480] pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
    [ 0.126557] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.126569] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
    [ 0.126572] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.126575] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.126628] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.126643] pci 0000:04:00.0: reg 10: [io 0xce00-0xceff]
    [ 0.126677] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
    [ 0.126693] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
    [ 0.126705] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.126764] pci 0000:04:00.0: supports D1 D2
    [ 0.126766] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.133342] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
    [ 0.133348] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.133352] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
    [ 0.133359] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.133422] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.133440] pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
    [ 0.133470] pci 0000:05:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
    [ 0.133491] pci 0000:05:00.0: reg 20: [mem 0xfdce0000-0xfdceffff 64bit pref]
    [ 0.133505] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.133572] pci 0000:05:00.0: supports D1 D2
    [ 0.133574] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.140007] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 0.140013] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
    [ 0.140018] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.140024] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
    [ 0.140061] pci 0000:06:01.0: [4444:0803] type 0 class 0x000400
    [ 0.140081] pci 0000:06:01.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
    [ 0.140186] pci 0000:06:07.0: [104c:8024] type 0 class 0x000c00
    [ 0.140208] pci 0000:06:07.0: reg 10: [mem 0xfdaff000-0xfdaff7ff]
    [ 0.140217] pci 0000:06:07.0: reg 14: [mem 0xfdaf8000-0xfdafbfff]
    [ 0.140279] pci 0000:06:07.0: supports D1 D2
    [ 0.140281] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
    [ 0.140315] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
    [ 0.140320] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.140325] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.140327] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.140329] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.140331] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.140333] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.140334] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
    [ 0.140336] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
    [ 0.140356] pci_bus 0000:00: on NUMA node 0
    [ 0.140359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.140507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [ 0.140544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [ 0.140585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    [ 0.140618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
    [ 0.140651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.140755] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.140757] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.140759] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.149257] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    [ 0.149296] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
    [ 0.149334] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    [ 0.149372] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.149409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    [ 0.149447] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    [ 0.149484] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    [ 0.149521] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    [ 0.149562] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.149562] vgaarb: loaded
    [ 0.149562] vgaarb: bridge control possible 0000:01:00.0
    [ 0.149562] PCI: Using ACPI for IRQ routing
    [ 0.150838] PCI: pci_cache_line_size set to 64 bytes
    [ 0.150920] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.150922] reserve RAM buffer: 000000007feb0000 - 000000007fffffff
    [ 0.151005] NetLabel: Initializing
    [ 0.151006] NetLabel: domain hash size = 128
    [ 0.151007] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.151016] NetLabel: unlabeled traffic allowed by default
    [ 0.151020] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.151025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.151029] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.160013] Switching to clocksource hpet
    [ 0.165171] pnp: PnP ACPI init
    [ 0.165185] ACPI: bus type pnp registered
    [ 0.165252] pnp 00:00: [bus 00-3f]
    [ 0.165254] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.165256] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.165257] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.165259] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.165261] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.165263] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.165265] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
    [ 0.165311] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.165373] pnp 00:01: [io 0x0010-0x001f]
    [ 0.165375] pnp 00:01: [io 0x0022-0x003f]
    [ 0.165376] pnp 00:01: [io 0x0044-0x004d]
    [ 0.165378] pnp 00:01: [io 0x0050-0x005f]
    [ 0.165379] pnp 00:01: [io 0x0062-0x0063]
    [ 0.165381] pnp 00:01: [io 0x0065-0x006f]
    [ 0.165382] pnp 00:01: [io 0x0074-0x007f]
    [ 0.165383] pnp 00:01: [io 0x0091-0x0093]
    [ 0.165385] pnp 00:01: [io 0x00a2-0x00bf]
    [ 0.165386] pnp 00:01: [io 0x00e0-0x00ef]
    [ 0.165388] pnp 00:01: [io 0x04d0-0x04d1]
    [ 0.165390] pnp 00:01: [io 0x0290-0x029f]
    [ 0.165391] pnp 00:01: [io 0x0800-0x0805]
    [ 0.165393] pnp 00:01: [io 0x0290-0x0294]
    [ 0.165394] pnp 00:01: [io 0x0880-0x088f]
    [ 0.165456] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.165458] system 00:01: [io 0x0290-0x029f] has been reserved
    [ 0.165460] system 00:01: [io 0x0800-0x0805] has been reserved
    [ 0.165462] system 00:01: [io 0x0290-0x0294] has been reserved
    [ 0.165464] system 00:01: [io 0x0880-0x088f] has been reserved
    [ 0.165467] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.165476] pnp 00:02: [dma 4]
    [ 0.165478] pnp 00:02: [io 0x0000-0x000f]
    [ 0.165480] pnp 00:02: [io 0x0080-0x0090]
    [ 0.165481] pnp 00:02: [io 0x0094-0x009f]
    [ 0.165483] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.165508] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.165547] pnp 00:03: [irq 0 disabled]
    [ 0.165555] pnp 00:03: [irq 8]
    [ 0.165557] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.165585] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.165608] pnp 00:04: [io 0x0070-0x0073]
    [ 0.165635] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.165642] pnp 00:05: [io 0x0061]
    [ 0.165669] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.165677] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.165681] pnp 00:06: [irq 13]
    [ 0.165707] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.165798] pnp 00:07: [io 0x03f0-0x03f5]
    [ 0.165799] pnp 00:07: [io 0x03f7]
    [ 0.165804] pnp 00:07: [irq 6]
    [ 0.165805] pnp 00:07: [dma 2]
    [ 0.165842] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.165968] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.165973] pnp 00:08: [irq 4]
    [ 0.166025] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.166167] pnp 00:09: [io 0x0378-0x037f]
    [ 0.166171] pnp 00:09: [irq 7]
    [ 0.166215] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.166310] pnp 00:0a: [io 0x0400-0x04cf]
    [ 0.166311] pnp 00:0a: [io 0x04d2-0x04ff]
    [ 0.166357] system 00:0a: [io 0x0400-0x04cf] has been reserved
    [ 0.166359] system 00:0a: [io 0x04d2-0x04ff] has been reserved
    [ 0.166362] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.166508] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
    [ 0.166559] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.166561] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.166692] pnp 00:0c: [mem 0x000cdc00-0x000cffff]
    [ 0.166694] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
    [ 0.166696] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
    [ 0.166698] pnp 00:0c: [mem 0x000fc000-0x000fffff]
    [ 0.166699] pnp 00:0c: [mem 0x7feb0000-0x7fefffff]
    [ 0.166701] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.166702] pnp 00:0c: [mem 0x00100000-0x7feaffff]
    [ 0.166704] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.166705] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
    [ 0.166707] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
    [ 0.166709] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.166710] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
    [ 0.166712] pnp 00:0c: [mem 0xfff00000-0xffffffff]
    [ 0.166713] pnp 00:0c: [mem 0x000e0000-0x000effff]
    [ 0.166775] system 00:0c: [mem 0x000cdc00-0x000cffff] has been reserved
    [ 0.166777] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.166779] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.166781] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.166783] system 00:0c: [mem 0x7feb0000-0x7fefffff] could not be reserved
    [ 0.166785] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.166787] system 00:0c: [mem 0x00100000-0x7feaffff] could not be reserved
    [ 0.166790] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.166792] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
    [ 0.166794] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
    [ 0.166796] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.166798] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
    [ 0.166800] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.166802] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
    [ 0.166804] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.166819] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
    [ 0.166857] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.166862] pnp: PnP ACPI: found 14 devices
    [ 0.166863] ACPI: ACPI bus type pnp unregistered
    [ 0.203267] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.203303] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7ff00000-0x800fffff 64bit pref]
    [ 0.203306] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff]
    [ 0.203309] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
    [ 0.203311] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.203314] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.203316] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.203319] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.203321] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.203324] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.203338] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.203340] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.203344] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff]
    [ 0.203348] pci 0000:00:1c.0: bridge window [mem 0x80300000-0x804fffff 64bit pref]
    [ 0.203353] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
    [ 0.203355] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.203359] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
    [ 0.203362] pci 0000:00:1c.3: bridge window [mem 0x7ff00000-0x800fffff 64bit pref]
    [ 0.203368] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
    [ 0.203370] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
    [ 0.203372] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
    [ 0.203376] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
    [ 0.203379] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.203385] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
    [ 0.203386] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
    [ 0.203389] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
    [ 0.203393] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.203396] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
    [ 0.203401] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
    [ 0.203405] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
    [ 0.203409] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.203426] pci 0000:00:1c.0: enabling device (0000 -> 0003)
    [ 0.203447] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.203451] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.203452] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.203454] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.203456] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.203458] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.203460] pci_bus 0000:00: resource 9 [mem 0x7ff00000-0xfebfffff]
    [ 0.203462] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.203463] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.203465] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.203467] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.203469] pci_bus 0000:02: resource 1 [mem 0x80100000-0x802fffff]
    [ 0.203471] pci_bus 0000:02: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
    [ 0.203473] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.203475] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
    [ 0.203477] pci_bus 0000:03: resource 2 [mem 0x7ff00000-0x800fffff 64bit pref]
    [ 0.203479] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    [ 0.203480] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
    [ 0.203482] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.203484] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
    [ 0.203486] pci_bus 0000:05: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.203488] pci_bus 0000:05: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
    [ 0.203490] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
    [ 0.203492] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
    [ 0.203493] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
    [ 0.203495] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
    [ 0.203497] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.203499] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.203501] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.203502] pci_bus 0000:06: resource 9 [mem 0x7ff00000-0xfebfffff]
    [ 0.203527] NET: Registered protocol family 2
    [ 0.203579] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.203743] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.204067] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.204228] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.204230] TCP reno registered
    [ 0.204232] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.204239] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.204289] NET: Registered protocol family 1
    [ 0.230047] pci 0000:01:00.0: Boot video device
    [ 0.230067] PCI: CLS 4 bytes, default 64
    [ 0.230115] Unpacking initramfs...
    [ 0.265087] Freeing initrd memory: 2620k freed
    [ 0.266068] apm: BIOS not found.
    [ 0.266288] audit: initializing netlink socket (disabled)
    [ 0.266299] type=2000 audit(1335262531.263:1): initialized
    [ 0.266584] highmem bounce pool size: 64 pages
    [ 0.266587] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.268217] VFS: Disk quotas dquot_6.5.2
    [ 0.268265] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.268344] msgmni has been set to 1719
    [ 0.268484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.268509] io scheduler noop registered
    [ 0.268510] io scheduler deadline registered
    [ 0.268515] io scheduler cfq registered (default)
    [ 0.268621] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.268690] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.268767] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
    [ 0.268848] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
    [ 0.268925] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
    [ 0.269038] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
    [ 0.269040] vesafb: scrolling: redraw
    [ 0.269042] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    [ 0.269245] vesafb: framebuffer at 0xf9000000, mapped to 0xf8080000, using 2560k, total 2560k
    [ 0.289257] Console: switching to colour frame buffer device 160x64
    [ 0.309184] fb0: VESA VGA frame buffer device
    [ 0.309220] intel_idle: MWAIT substates: 0x22220
    [ 0.309221] intel_idle: does not run on family 6 model 23
    [ 0.309239] GHES: HEST is not enabled!
    [ 0.309250] isapnp: Scanning for PnP cards...
    [ 0.621201] isapnp: No Plug & Play device found
    [ 0.621251] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.641735] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.662470] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.662752] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.696011] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
    [ 0.696012] i8042: If AUX port is really absent please use the 'i8042.noaux' option
    [ 0.943424] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.943556] mousedev: PS/2 mouse device common for all mice
    [ 0.943618] rtc_cmos 00:04: RTC can wake from S4
    [ 0.943703] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.943724] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.943743] cpuidle: using governor ladder
    [ 0.943744] cpuidle: using governor menu
    [ 0.943914] TCP cubic registered
    [ 0.944019] NET: Registered protocol family 10
    [ 0.944386] NET: Registered protocol family 17
    [ 0.944389] Registering the dns_resolver key type
    [ 0.944402] Using IPI No-Shortcut mode
    [ 0.944484] PM: Hibernation image not present or could not be loaded.
    [ 0.944488] registered taskstats version 1
    [ 0.944912] rtc_cmos 00:04: setting system clock to 2012-04-24 10:15:32 UTC (1335262532)
    [ 0.944944] Initializing network drop monitor service
    [ 0.944995] Freeing unused kernel memory: 520k freed
    [ 0.945188] Write protecting the kernel text: 3776k
    [ 0.945206] Write protecting the kernel read-only data: 1108k
    [ 0.950321] udevd[37]: starting version 181
    [ 0.975067] usbcore: registered new interface driver usbfs
    [ 0.975086] usbcore: registered new interface driver hub
    [ 0.975403] usbcore: registered new device driver usb
    [ 0.976311] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.976358] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.976362] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.976381] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.977405] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.980290] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
    [ 0.980307] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
    [ 0.981979] SCSI subsystem initialized
    [ 0.987728] libata version 3.00 loaded.
    [ 0.990179] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.991541] ahci 0000:03:00.0: version 3.0
    [ 0.991704] hub 1-0:1.0: USB hub found
    [ 0.991708] hub 1-0:1.0: 6 ports detected
    [ 0.991829] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.991832] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.991839] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
    [ 0.991875] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
    [ 0.992004] hub 2-0:1.0: USB hub found
    [ 0.992008] hub 2-0:1.0: 2 ports detected
    [ 0.992104] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.992107] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.992113] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
    [ 0.992140] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
    [ 0.992298] hub 3-0:1.0: USB hub found
    [ 0.992301] hub 3-0:1.0: 2 ports detected
    [ 0.992395] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 0.992398] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 0.992404] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
    [ 0.992424] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
    [ 0.992562] hub 4-0:1.0: USB hub found
    [ 0.992565] hub 4-0:1.0: 2 ports detected
    [ 0.992630] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.992632] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.992638] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.992666] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
    [ 0.992779] hub 5-0:1.0: USB hub found
    [ 0.992782] hub 5-0:1.0: 2 ports detected
    [ 0.992997] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.993000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.993006] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.993032] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
    [ 0.993178] hub 6-0:1.0: USB hub found
    [ 0.993181] hub 6-0:1.0: 2 ports detected
    [ 0.993244] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.993247] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.993253] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.993272] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
    [ 0.993393] hub 7-0:1.0: USB hub found
    [ 0.993396] hub 7-0:1.0: 2 ports detected
    [ 0.993484] pata_acpi 0000:00:1f.2: setting latency timer to 64
    [ 0.993516] pata_acpi 0000:00:1f.5: setting latency timer to 64
    [ 0.993552] ata_piix 0000:00:1f.2: version 2.13
    [ 0.993561] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.993587] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.994010] scsi0 : ata_piix
    [ 0.994209] scsi1 : ata_piix
    [ 0.994687] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 0.994692] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 0.994722] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 0.994764] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 0.995109] scsi2 : ata_piix
    [ 0.995998] scsi3 : ata_piix
    [ 0.996404] ata3: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
    [ 0.996408] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
    [ 0.996449] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.996452] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.996459] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
    [ 1.000369] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
    [ 1.000375] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
    [ 1.003374] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 1.003377] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    [ 1.003714] scsi4 : ahci
    [ 1.003787] scsi5 : ahci
    [ 1.003874] ata5: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 19
    [ 1.003877] ata6: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 19
    [ 1.003896] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
    [ 1.003923] pata_acpi 0000:03:00.1: setting latency timer to 64
    [ 1.010024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.010224] hub 8-0:1.0: USB hub found
    [ 1.010228] hub 8-0:1.0: 6 ports detected
    [ 1.266680] Refined TSC clocksource calibration: 2800.098 MHz.
    [ 1.266686] Switching to clocksource tsc
    [ 1.330673] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.330675] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.330708] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.341360] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.573349] usb 7-2: new full-speed USB device number 2 using uhci_hcd
    [ 1.720359] hub 7-2:1.0: USB hub found
    [ 1.722307] hub 7-2:1.0: 4 ports detected
    [ 1.786726] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.786740] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.796725] ata2.00: SATA link down (SStatus 0 SControl 300)
    [ 1.796738] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.807549] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
    [ 1.816278] ata1.01: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
    [ 1.816282] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.826793] ata1.00: configured for UDMA/100
    [ 1.834352] ata1.01: configured for UDMA/133
    [ 1.835903] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
    [ 1.836204] scsi 0:0:1:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
    [ 1.837381] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.837417] sd 0:0:1:0: [sda] Write Protect is off
    [ 1.837419] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.837435] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.842977] ata2.01: HPA detected: current 1250261615, native 1250263728
    [ 1.842984] ata2.01: ATA-8: WDC WD6400AACS-00G8B1, 05.04C05, max UDMA/133
    [ 1.842988] ata2.01: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.846979] ata2.01: configured for UDMA/133
    [ 1.847098] scsi 1:0:1:0: Direct-Access ATA WDC WD6400AACS-0 05.0 PQ: 0 ANSI: 5
    [ 1.847319] sd 1:0:1:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
    [ 1.847357] sd 1:0:1:0: [sdb] Write Protect is off
    [ 1.847360] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.847382] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.879393] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
    [ 1.879836] sd 0:0:1:0: [sda] Attached SCSI disk
    [ 1.959783] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
    [ 1.960479] sd 1:0:1:0: [sdb] Attached SCSI disk
    [ 1.960917] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 1.962994] scsi6 : pata_jmicron
    [ 1.963298] scsi7 : pata_jmicron
    [ 1.963868] ata7: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
    [ 1.963871] ata8: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
    [ 1.964182] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.964185] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.965513] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 1.998314] usb 7-2.1: new full-speed USB device number 3 using uhci_hcd
    [ 2.184767] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.0/input/input0
    [ 2.184815] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input0
    [ 2.202436] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.1/input/input1
    [ 2.202537] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input1
    [ 2.210716] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.1/7-2.1:1.2/input/input2
    [ 2.210787] generic-usb 0003:046D:C318.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input2
    [ 2.210801] usbcore: registered new interface driver usbhid
    [ 2.210802] usbhid: USB HID core driver
    [ 3.022683] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.658594] udevd[149]: starting version 181
    [ 3.749111] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 3.749117] ACPI: Power Button [PWRB]
    [ 3.749172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 3.749175] ACPI: Power Button [PWRF]
    [ 3.847032] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 3.863476] Linux media interface: v0.10
    [ 3.864344] Marking TSC unstable due to TSC halts in idle
    [ 3.865784] IT8718 SuperIO detected.
    [ 3.865831] ACPI: acpi_idle registered with cpuidle
    [ 3.866042] parport_pc 00:09: reported by Plug and Play ACPI
    [ 3.866083] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 3.866482] Switching to clocksource hpet
    [ 3.898275] iTCO_vendor_support: vendor-support=0
    [ 3.898849] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 3.898919] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
    [ 3.898972] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 3.917356] Linux agpgart interface v0.103
    [ 3.970494] Floppy drive(s): fd0 is 1.44M
    [ 3.971382] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.971469] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
    [ 3.973433] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf8950000, 00:24:1d:2a:98:49, XID 1c4000c0 IRQ 45
    [ 3.973436] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 3.973494] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.973569] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
    [ 3.974018] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xf8998000, 00:1f:d0:81:ab:41, XID 1c4000c0 IRQ 46
    [ 3.974020] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    [ 3.976502] Linux video capture interface: v2.00
    [ 3.976567] ppdev: user-space parallel port driver
    [ 3.986986] FDC 0 is a post-1991 82077
    [ 4.092911] usbcore: registered new interface driver uvcvideo
    [ 4.092913] USB Video Class driver (1.1.1)
    [ 4.093407] firewire_ohci: Added fw-ohci device 0000:06:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
    [ 4.117496] lirc_dev: IR Remote Control driver registered, major 249
    [ 4.123010] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.123013] Disabling lock debugging due to kernel taint
    [ 4.139426] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 4.139793] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
    [ 4.141376] bttv: driver version 0.9.19 loaded
    [ 4.141378] bttv: using 8 buffers with 2080k (520 pages) each for capture
    [ 4.141895] IR NEC protocol handler initialized
    [ 4.158820] IR RC5(x) protocol handler initialized
    [ 4.161235] ivtv: Start initialization, version 1.4.3
    [ 4.161283] ivtv0: Initializing card 0
    [ 4.161284] ivtv0: Autodetected Hauppauge card (cx23415 based)
    [ 4.162012] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
    [ 4.166021] IR RC6 protocol handler initialized
    [ 4.211259] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
    [ 4.211692] IR JVC protocol handler initialized
    [ 4.220218] tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 9950569
    [ 4.220220] tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
    [ 4.220223] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
    [ 4.220224] tveeprom 1-0050: audio processor is MSP4448 (idx 27)
    [ 4.220226] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
    [ 4.220228] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
    [ 4.220230] ivtv0: Autodetected Hauppauge WinTV PVR-350
    [ 4.301205] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 4.327025] IR Sony protocol handler initialized
    [ 4.352604] IR SANYO protocol handler initialized
    [ 4.353105] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
    [ 4.361735] hda_codec: ALC889A: BIOS auto-probing.
    [ 4.377224] IR MCE Keyboard/mouse protocol handler initialized
    [ 4.379125] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 4.379251] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 4.379362] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 4.379473] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 4.379583] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 4.379693] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 4.379803] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 4.379913] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 4.433935] IR LIRC bridge handler initialized
    [ 4.593456] firewire_core: created device fw0: GUID 00427c790000241d, S400
    [ 4.605356] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
    [ 4.847635] i2c-core: driver [msp3400] using legacy suspend method
    [ 4.847637] i2c-core: driver [msp3400] using legacy resume method
    [ 4.858881] msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
    [ 4.858883] msp3400 1-0040: msp3400 supports radio, mode is autodetect and autoselect
    [ 4.892295] i2c-core: driver [tuner] using legacy suspend method
    [ 4.892297] i2c-core: driver [tuner] using legacy resume method
    [ 4.914640] tda9887 1-0043: creating new instance
    [ 4.914642] tda9887 1-0043: tda988[5/6/7] found
    [ 4.915701] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
    [ 4.916868] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
    [ 4.918126] lirc_i2c: chip found @ 0x18 (Hauppauge IR)
    [ 4.918199] i2c ir driver 1-0018: lirc_dev: driver lirc_i2c registered at minor = 0
    [ 4.924857] tuner-simple 1-0061: creating new instance
    [ 4.924860] tuner-simple 1-0061: type set to 47 (LG NTSC (TAPE series))
    [ 4.938880] ivtv0: Registered device video0 for encoder MPG (4096 kB)
    [ 4.938913] ivtv0: Registered device video32 for encoder YUV (2048 kB)
    [ 4.938944] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
    [ 4.938975] ivtv0: Registered device video24 for encoder PCM (320 kB)
    [ 4.939009] ivtv0: Registered device radio0 for encoder radio
    [ 4.939040] ivtv0: Registered device video16 for decoder MPG (1024 kB)
    [ 4.939072] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
    [ 4.939101] ivtv0: Registered device vbi16 for decoder VOUT
    [ 4.939131] ivtv0: Registered device video48 for decoder YUV (1024 kB)
    [ 4.939133] ivtv0: Initialized card: Hauppauge WinTV PVR-350
    [ 4.939147] ivtv: End initialization
    [ 5.588685] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
    [ 5.605080] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
    [ 5.803694] ivtv0: Encoder revision: 0x02060039
    [ 5.803817] ivtv0: Decoder revision: 0x02020023
    [ 5.887242] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
    [ 6.536711] EXT4-fs (sda6): re-mounted. Opts: user_xattr
    [ 6.698002] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
    [ 6.698239] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.747502] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 6.748386] SGI XFS Quota Management subsystem
    [ 6.749002] XFS (sdb11): Mounting Filesystem
    [ 6.859760] XFS (sdb11): Ending clean mount
    [ 6.874309] EXT4-fs (sdb12): mounting ext3 file system using the ext4 subsystem
    [ 6.907592] EXT4-fs (sdb12): warning: maximal mount count reached, running e2fsck is recommended
    [ 6.908028] EXT4-fs (sdb12): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.952816] EXT4-fs (sdb8): mounting ext3 file system using the ext4 subsystem
    [ 6.968115] EXT4-fs (sdb8): warning: maximal mount count reached, running e2fsck is recommended
    [ 6.968383] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.039094] EXT4-fs (sdb9): mounting ext3 file system using the ext4 subsystem
    [ 7.054659] EXT4-fs (sdb9): warning: maximal mount count reached, running e2fsck is recommended
    [ 7.054942] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.066008] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [ 7.077812] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
    [ 7.078217] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
    [ 7.089318] Adding 2096444k swap on /dev/sda5. Priority:-1 extents:1 across:2096444k
    [ 8.551413] r8169 0000:04:00.0: eth0: link down
    [ 8.551420] r8169 0000:04:00.0: eth0: link down
    [ 8.551554] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 10.165331] r8169 0000:04:00.0: eth0: link up
    [ 10.165539] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 20.243339] eth0: no IPv6 routers present
    [ 124.829802] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
    [ 124.831186] NVRM: RmInitAdapter failed! (0x26:0xffffffff:1170)
    [ 124.831192] NVRM: rm_init_adapter(0) failed
    [ 125.506419] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size.
    [ 125.507795] NVRM: RmInitAdapter failed! (0x26:0xffffffff:1170)
    [ 125.507801] NVRM: rm_init_adapter(0) failed
    Xorg.0.log:
    [ 123.542]
    X.Org X Server 1.11.4
    Release Date: 2012-01-27
    [ 123.542] X Protocol Version 11, Revision 0
    [ 123.542] Build Operating System: Linux 3.2.2-1-ARCH i686
    [ 123.542] Current Operating System: Linux intel-arch 3.3.2-1-ARCH #1 SMP PREEMPT Sat Apr 14 10:08:43 UTC 2012 i686
    [ 123.542] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda6 vga=794
    [ 123.543] Build Date: 29 January 2012 03:41:53PM
    [ 123.543]
    [ 123.543] Current version of pixman: 0.24.4
    [ 123.543] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 123.543] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 123.544] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 24 10:17:35 2012
    [ 123.544] (==) Using config file: "/etc/X11/xorg.conf"
    [ 123.544] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 123.545] (==) ServerLayout "Layout0"
    [ 123.545] (**) |-->Screen "Screen0" (0)
    [ 123.545] (**) | |-->Monitor "Monitor0"
    [ 123.546] (**) | |-->Device "Device0"
    [ 123.546] (**) |-->Screen "Screen1" (1)
    [ 123.546] (**) | |-->Monitor "Monitor1"
    [ 123.546] (**) | |-->Device "Device1"
    [ 123.546] (**) |-->Input Device "Keyboard0"
    [ 123.546] (**) |-->Input Device "Mouse0"
    [ 123.546] (**) Option "Xinerama" "0"
    [ 123.546] (==) Automatically adding devices
    [ 123.546] (==) Automatically enabling devices
    [ 123.555] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 123.555] Entry deleted from font path.
    [ 123.555] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 123.555] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 123.555] (**) Extension "Composite" is enabled
    [ 123.555] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 123.555] (WW) Disabling Keyboard0
    [ 123.555] (WW) Disabling Mouse0
    [ 123.555] (II) Loader magic: 0x8228580
    [ 123.555] (II) Module ABI versions:
    [ 123.555] X.Org ANSI C Emulation: 0.4
    [ 123.555] X.Org Video Driver: 11.0
    [ 123.555] X.Org XInput driver : 13.0
    [ 123.555] X.Org Server Extension : 6.0
    [ 123.556] (--) PCI:*(0:1:0:0) 10de:06e4:1462:1162 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
    [ 123.556] (--) PCI: (0:6:1:0) 4444:0803:0070:4000 rev 1, Mem @ 0xf4000000/67108864
    [ 123.556] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 123.556] (II) LoadModule: "extmod"
    [ 123.588] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 123.593] (II) Module extmod: vendor="X.Org Foundation"
    [ 123.593] compiled for 1.11.4, module version = 1.0.0
    [ 123.593] Module class: X.Org Server Extension
    [ 123.593] ABI class: X.Org Server Extension, version 6.0
    [ 123.593] (II) Loading extension MIT-SCREEN-SAVER
    [ 123.593] (II) Loading extension XFree86-VidModeExtension
    [ 123.593] (II) Loading extension XFree86-DGA
    [ 123.593] (II) Loading extension DPMS
    [ 123.593] (II) Loading extension XVideo
    [ 123.593] (II) Loading extension XVideo-MotionCompensation
    [ 123.593] (II) Loading extension X-Resource
    [ 123.593] (II) LoadModule: "dbe"
    [ 123.593] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 123.601] (II) Module dbe: vendor="X.Org Foundation"
    [ 123.601] compiled for 1.11.4, module version = 1.0.0
    [ 123.601] Module class: X.Org Server Extension
    [ 123.601] ABI class: X.Org Server Extension, version 6.0
    [ 123.601] (II) Loading extension DOUBLE-BUFFER
    [ 123.601] (II) LoadModule: "glx"
    [ 123.601] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 123.651] (II) Module glx: vendor="NVIDIA Corporation"
    [ 123.651] compiled for 4.0.2, module version = 1.0.0
    [ 123.651] Module class: X.Org Server Extension
    [ 123.651] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:49:54 PDT 2012
    [ 123.651] (II) Loading extension GLX
    [ 123.651] (II) LoadModule: "record"
    [ 123.651] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 123.652] (II) Module record: vendor="X.Org Foundation"
    [ 123.652] compiled for 1.11.4, module version = 1.13.0
    [ 123.652] Module class: X.Org Server Extension
    [ 123.652] ABI class: X.Org Server Extension, version 6.0
    [ 123.652] (II) Loading extension RECORD
    [ 123.652] (II) LoadModule: "dri"
    [ 123.652] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 123.663] (II) Module dri: vendor="X.Org Foundation"
    [ 123.663] compiled for 1.11.4, module version = 1.0.0
    [ 123.663] ABI class: X.Org Server Extension, version 6.0
    [ 123.663] (II) Loading extension XFree86-DRI
    [ 123.663] (II) LoadModule: "dri2"
    [ 123.663] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 123.664] (II) Module dri2: vendor="X.Org Foundation"
    [ 123.664] compiled for 1.11.4, module version = 1.2.0
    [ 123.664] ABI class: X.Org Server Extension, version 6.0
    [ 123.664] (II) Loading extension DRI2
    [ 123.664] (II) LoadModule: "nvidia"
    [ 123.664] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 123.698] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 123.698] compiled for 4.0.2, module version = 1.0.0
    [ 123.698] Module class: X.Org Video Driver
    [ 123.723] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:29:50 PDT 2012
    [ 123.725] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 123.726] (--) using VT number 7
    [ 123.748] (II) Loading sub module "fb"
    [ 123.748] (II) LoadModule: "fb"
    [ 123.748] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 123.757] (II) Module fb: vendor="X.Org Foundation"
    [ 123.757] compiled for 1.11.4, module version = 1.0.0
    [ 123.757] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 123.757] (II) Loading sub module "wfb"
    [ 123.757] (II) LoadModule: "wfb"
    [ 123.757] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 123.758] (II) Module wfb: vendor="X.Org Foundation"
    [ 123.758] compiled for 1.11.4, module version = 1.0.0
    [ 123.758] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 123.758] (II) Loading sub module "ramdac"
    [ 123.758] (II) LoadModule: "ramdac"
    [ 123.758] (II) Module "ramdac" already built-in
    [ 123.760] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 123.760] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 123.760] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 123.770] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 123.770] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 123.770] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 123.770] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 123.770] (==) NVIDIA(0): RGB weight 888
    [ 123.770] (==) NVIDIA(0): Default visual is TrueColor
    [ 123.770] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 123.770] (**) NVIDIA(0): Option "TwinView" "0"
    [ 123.770] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
    [ 123.770] (**) NVIDIA(0): Option "Coolbits" "1"
    [ 123.770] (**) NVIDIA(0): Option "TripleBuffer" "false"
    [ 123.770] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
    [ 123.771] (**) NVIDIA(0): Enabling 2D acceleration
    [ 124.831] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 124.831] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 124.831] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 124.831] (EE) NVIDIA(0): README for additional information.
    [ 124.831] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 124.831] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
    [ 124.831] (==) NVIDIA(1): RGB weight 888
    [ 124.831] (==) NVIDIA(1): Default visual is TrueColor
    [ 124.831] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
    [ 124.831] (**) N

  • Xbmc+nvidia+vdpau issues [SOLVED]

    I've been at this for 5 hours straight now, and i'm back to square one. I've tried xbmc-svn but that one didn't even have "vdpau" listed as an option, so I tried xbmc instead. And yes vdpau is showing up as an option but no matter what I try the screen gets screen/grey/different colors everytime I try to launch a movie using vdpau, tried nvidia and nvidia-beta same issue.
    I'm totally stumped, is there a secret/magic setting i've forgotten to use in my xorg?
    GPU: 9800GT 512MB
    Using HDMI - LCD
    780G mobo (internal ati gpu disabled)
    I just tried xbmc-live (usb stick) and watching a movie with vdpau results in a grey/green/distorted screen. That worries me a lot, I mean if it's not working on the usb stick then my gpu might be damaged or something?
    ISSUE RESOLVED, IT WAS MY GPU, BOUGHT A NEW ONE TODAY
    Here's my xorg (using hal dbus nvidia)
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "true"
    Option "Xinerama" "0"
    Option "NoLogo" "True"
    Option "ConnectedMonitor" "DFP"
    Option "TripleBuffer" "True"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "SAMSUNG"
    HorizSync 15.0 - 46.0
    VertRefresh 50.0 - 61.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9800 GT"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "1920x1080 +0+0"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Last edited by greenfish (2009-09-28 10:51:05)

    OK, will give that a run after work this evening. I stand corrected, I did not realize that hte repo version was the same, for some reason I was thinking that it was 340.4x or something. Not to self, do better research. As far as the Xorg :0 -configure, I deleted all of the xorg.conf i could find. (~/xorg.conf, /etc/X11/xorg.conf.d [actually delted the entire /etc/X11 directory] /usr/share/X11/xorg.conf [once again, rm -rfv'd the entire X11 directory) so I was hoping to start with a blank slate, and use the -configure command to give me something to work with. At this point, I want to use the nouveua drivers, as by and large they seemed more reliable than nvidias (I had the repo version on before this whole mess, which may have contributed to getting me into this mess.) In that case, do I still need the nvidia-drm-outputclass.conf? (I don't remember ever seeing that file, even when I first setup this system.) The other two I should be able to locate pretty easily. (Tried to keep backups of stuff as I deleted it, or like you said, the wiki has most stuff that I've needed so far.) Oh, and yeah, the root config file is the result of the -configure command. I knew it was there, but it didn't seem to make a difference, which I chalked up to the configure erroring out.
    so, at this point, I want to remove the /root/xorg.conf.new, remove the contents of /etc/X11/xorg.conf.d (preserving the directory itself?) and remove anything other than
    10-evdev.conf 10-quirks.conf nvidia-drm-outputclass.conf
    , and consider checking the wiki for "virgin" versions of those three. Do I have that correct?
    and, lest I forget, I am deeply grateful for your kind advice!! (not used to being on this side of a problem, I am deeply familiar with android, and over on XDA forums, I have helped many people through smartphone issues, kinda humbling to have to ask for help.)

  • [Solved] Report on Issue with Kernel Config with Nvidia Graphics

    I switched back to Archlinux from Gentoo recently and I have been having problems with the system freezing during boot before X is started, even with the nvidia module blacklisted.  Trying several module versions yielded different results, all of which render the laptop inoperable.  In some versions, it freezes with the display still on, sometimes the display goes dark.  The system has never booted unless I had ignore_loglevel and debug on the command line.  The above only applies when the system is set to discrete graphics only in the BIOS.  The system works fine under optimus.  (Before people ask, I need this to use the Display Port/HDMI.)  The only relevant error I can find is as follows:
    NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    I am able to reproduce this issue even with rcutree.rcu_idle_gp_delay=1 in the kernel command line.  Since a simmilar configuration worked under Gentoo, I moved over my kernel and modules backed up from my Gentoo installation and made a basic, custom mkinitcpio configuration file for it, and generated an initramfs for the Gentoo kernel.  Because of the kernel changes, I had to rebuild the Nvidia drivers.  I did this by running the default Nvidia installer NVIDIA-Linux-x86_64-343.22.run outside of Pacman. (As a side note, I did accidentally test running the Nvidia installer with the default kernel and the issue persisted.)  Using the Gentoo kernel and the Nvidia installer resolved the issue, which narrowed down the issue to the kernel configuration.  I started merging the configuration with Arch's configuration going by menu's.  The issue reoccured when I merged the Enable the block layer and Processor type and features with the configuration Arch uses.  The current configuration that I am using that reproduces the issue is:
    # Automatically generated file; DO NOT EDIT.
    # Linux/x86 3.17.2-gentoo Kernel Configuration
    # Gentoo Linux
    CONFIG_GENTOO_LINUX=y
    CONFIG_GENTOO_LINUX_UDEV=y
    # Support for init systems, system and service managers
    CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
    CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y
    CONFIG_64BIT=y
    CONFIG_X86_64=y
    CONFIG_X86=y
    CONFIG_INSTRUCTION_DECODER=y
    CONFIG_OUTPUT_FORMAT="elf64-x86-64"
    CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_HAVE_LATENCYTOP_SUPPORT=y
    CONFIG_MMU=y
    CONFIG_NEED_DMA_MAP_STATE=y
    CONFIG_NEED_SG_DMA_LENGTH=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_BUG=y
    CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_ARCH_HAS_CPU_RELAX=y
    CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
    CONFIG_HAVE_SETUP_PER_CPU_AREA=y
    CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
    CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
    CONFIG_ARCH_HIBERNATION_POSSIBLE=y
    CONFIG_ARCH_SUSPEND_POSSIBLE=y
    CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
    CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
    CONFIG_ZONE_DMA32=y
    CONFIG_AUDIT_ARCH=y
    CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
    CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
    CONFIG_HAVE_INTEL_TXT=y
    CONFIG_X86_64_SMP=y
    CONFIG_X86_HT=y
    CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
    CONFIG_ARCH_SUPPORTS_UPROBES=y
    CONFIG_FIX_EARLYCON_MEM=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
    CONFIG_IRQ_WORK=y
    CONFIG_BUILDTIME_EXTABLE_SORT=y
    # General setup
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_CROSS_COMPILE=""
    # CONFIG_COMPILE_TEST is not set
    CONFIG_LOCALVERSION="-tachibana"
    # CONFIG_LOCALVERSION_AUTO is not set
    CONFIG_HAVE_KERNEL_GZIP=y
    CONFIG_HAVE_KERNEL_BZIP2=y
    CONFIG_HAVE_KERNEL_LZMA=y
    CONFIG_HAVE_KERNEL_XZ=y
    CONFIG_HAVE_KERNEL_LZO=y
    CONFIG_HAVE_KERNEL_LZ4=y
    CONFIG_KERNEL_GZIP=y
    # CONFIG_KERNEL_BZIP2 is not set
    # CONFIG_KERNEL_LZMA is not set
    # CONFIG_KERNEL_XZ is not set
    # CONFIG_KERNEL_LZO is not set
    # CONFIG_KERNEL_LZ4 is not set
    CONFIG_DEFAULT_HOSTNAME="(none)"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_POSIX_MQUEUE_SYSCTL=y
    CONFIG_CROSS_MEMORY_ATTACH=y
    CONFIG_FHANDLE=y
    # CONFIG_USELIB is not set
    # CONFIG_AUDIT is not set
    CONFIG_HAVE_ARCH_AUDITSYSCALL=y
    # IRQ subsystem
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_IRQ_SHOW=y
    CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_IRQ_DOMAIN=y
    # CONFIG_IRQ_DOMAIN_DEBUG is not set
    CONFIG_IRQ_FORCED_THREADING=y
    CONFIG_SPARSE_IRQ=y
    CONFIG_CLOCKSOURCE_WATCHDOG=y
    CONFIG_ARCH_CLOCKSOURCE_DATA=y
    CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
    CONFIG_GENERIC_TIME_VSYSCALL=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
    CONFIG_GENERIC_CMOS_UPDATE=y
    # Timers subsystem
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ_COMMON=y
    # CONFIG_HZ_PERIODIC is not set
    CONFIG_NO_HZ_IDLE=y
    # CONFIG_NO_HZ_FULL is not set
    # CONFIG_NO_HZ is not set
    CONFIG_HIGH_RES_TIMERS=y
    # CPU/Task time and stats accounting
    CONFIG_TICK_CPU_ACCOUNTING=y
    # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
    # CONFIG_IRQ_TIME_ACCOUNTING is not set
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_BSD_PROCESS_ACCT_V3=y
    CONFIG_TASKSTATS=y
    CONFIG_TASK_DELAY_ACCT=y
    CONFIG_TASK_XACCT=y
    CONFIG_TASK_IO_ACCOUNTING=y
    # RCU Subsystem
    CONFIG_TREE_PREEMPT_RCU=y
    CONFIG_PREEMPT_RCU=y
    CONFIG_RCU_STALL_COMMON=y
    # CONFIG_RCU_USER_QS is not set
    CONFIG_RCU_FANOUT=64
    CONFIG_RCU_FANOUT_LEAF=16
    # CONFIG_RCU_FANOUT_EXACT is not set
    # CONFIG_RCU_FAST_NO_HZ is not set
    # CONFIG_TREE_RCU_TRACE is not set
    # CONFIG_RCU_BOOST is not set
    # CONFIG_RCU_NOCB_CPU is not set
    CONFIG_BUILD_BIN2C=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=19
    CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
    CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
    CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
    CONFIG_ARCH_SUPPORTS_INT128=y
    CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
    CONFIG_ARCH_USES_NUMA_PROT_NONE=y
    CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
    CONFIG_NUMA_BALANCING=y
    CONFIG_CGROUPS=y
    # CONFIG_CGROUP_DEBUG is not set
    CONFIG_CGROUP_FREEZER=y
    CONFIG_CGROUP_DEVICE=y
    CONFIG_CPUSETS=y
    CONFIG_PROC_PID_CPUSET=y
    CONFIG_CGROUP_CPUACCT=y
    CONFIG_RESOURCE_COUNTERS=y
    CONFIG_MEMCG=y
    CONFIG_MEMCG_SWAP=y
    # CONFIG_MEMCG_SWAP_ENABLED is not set
    # CONFIG_MEMCG_KMEM is not set
    # CONFIG_CGROUP_HUGETLB is not set
    # CONFIG_CGROUP_PERF is not set
    CONFIG_CGROUP_SCHED=y
    CONFIG_FAIR_GROUP_SCHED=y
    CONFIG_CFS_BANDWIDTH=y
    CONFIG_RT_GROUP_SCHED=y
    CONFIG_BLK_CGROUP=y
    # CONFIG_DEBUG_BLK_CGROUP is not set
    # CONFIG_CHECKPOINT_RESTORE is not set
    CONFIG_NAMESPACES=y
    CONFIG_UTS_NS=y
    CONFIG_IPC_NS=y
    # CONFIG_USER_NS is not set
    CONFIG_PID_NS=y
    CONFIG_NET_NS=y
    CONFIG_SCHED_AUTOGROUP=y
    # CONFIG_SYSFS_DEPRECATED is not set
    CONFIG_RELAY=y
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_RD_GZIP=y
    CONFIG_RD_BZIP2=y
    CONFIG_RD_LZMA=y
    CONFIG_RD_XZ=y
    CONFIG_RD_LZO=y
    CONFIG_RD_LZ4=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SYSCTL=y
    CONFIG_ANON_INODES=y
    CONFIG_HAVE_UID16=y
    CONFIG_SYSCTL_EXCEPTION_TRACE=y
    CONFIG_HAVE_PCSPKR_PLATFORM=y
    # CONFIG_EXPERT is not set
    CONFIG_UID16=y
    CONFIG_SGETMASK_SYSCALL=y
    CONFIG_SYSFS_SYSCALL=y
    # CONFIG_SYSCTL_SYSCALL is not set
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_PCSPKR_PLATFORM=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_TIMERFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_AIO=y
    CONFIG_PCI_QUIRKS=y
    # CONFIG_EMBEDDED is not set
    CONFIG_HAVE_PERF_EVENTS=y
    # Kernel Performance Events And Counters
    CONFIG_PERF_EVENTS=y
    # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_SLUB_DEBUG=y
    # CONFIG_COMPAT_BRK is not set
    # CONFIG_SLAB is not set
    CONFIG_SLUB=y
    CONFIG_SLUB_CPU_PARTIAL=y
    CONFIG_SYSTEM_TRUSTED_KEYRING=y
    CONFIG_PROFILING=y
    CONFIG_TRACEPOINTS=y
    CONFIG_OPROFILE=m
    # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
    CONFIG_HAVE_OPROFILE=y
    CONFIG_OPROFILE_NMI_TIMER=y
    CONFIG_KPROBES=y
    CONFIG_JUMP_LABEL=y
    CONFIG_KPROBES_ON_FTRACE=y
    CONFIG_UPROBES=y
    # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
    CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
    CONFIG_ARCH_USE_BUILTIN_BSWAP=y
    CONFIG_KRETPROBES=y
    CONFIG_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_IOREMAP_PROT=y
    CONFIG_HAVE_KPROBES=y
    CONFIG_HAVE_KRETPROBES=y
    CONFIG_HAVE_OPTPROBES=y
    CONFIG_HAVE_KPROBES_ON_FTRACE=y
    CONFIG_HAVE_ARCH_TRACEHOOK=y
    CONFIG_HAVE_DMA_ATTRS=y
    CONFIG_HAVE_DMA_CONTIGUOUS=y
    CONFIG_GENERIC_SMP_IDLE_THREAD=y
    CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
    CONFIG_HAVE_DMA_API_DEBUG=y
    CONFIG_HAVE_HW_BREAKPOINT=y
    CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
    CONFIG_HAVE_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_PERF_EVENTS_NMI=y
    CONFIG_HAVE_PERF_REGS=y
    CONFIG_HAVE_PERF_USER_STACK_DUMP=y
    CONFIG_HAVE_ARCH_JUMP_LABEL=y
    CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
    CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
    CONFIG_HAVE_CMPXCHG_LOCAL=y
    CONFIG_HAVE_CMPXCHG_DOUBLE=y
    CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
    CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
    CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
    CONFIG_SECCOMP_FILTER=y
    CONFIG_HAVE_CC_STACKPROTECTOR=y
    CONFIG_CC_STACKPROTECTOR=y
    # CONFIG_CC_STACKPROTECTOR_NONE is not set
    # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
    CONFIG_CC_STACKPROTECTOR_STRONG=y
    CONFIG_HAVE_CONTEXT_TRACKING=y
    CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
    CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
    CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
    CONFIG_HAVE_ARCH_SOFT_DIRTY=y
    CONFIG_MODULES_USE_ELF_RELA=y
    CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
    CONFIG_OLD_SIGSUSPEND3=y
    CONFIG_COMPAT_OLD_SIGACTION=y
    # GCOV-based kernel profiling
    # CONFIG_GCOV_KERNEL is not set
    # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
    CONFIG_SLABINFO=y
    CONFIG_RT_MUTEXES=y
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    CONFIG_MODULE_FORCE_LOAD=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_MODVERSIONS=y
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    # CONFIG_MODULE_SIG is not set
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    CONFIG_BLK_DEV_BSG=y
    CONFIG_BLK_DEV_BSGLIB=y
    CONFIG_BLK_DEV_INTEGRITY=y
    CONFIG_BLK_DEV_THROTTLING=y
    # CONFIG_BLK_CMDLINE_PARSER is not set
    # Partition Types
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    CONFIG_AIX_PARTITION=y
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    CONFIG_MAC_PARTITION=y
    CONFIG_MSDOS_PARTITION=y
    CONFIG_BSD_DISKLABEL=y
    CONFIG_MINIX_SUBPARTITION=y
    CONFIG_SOLARIS_X86_PARTITION=y
    # CONFIG_UNIXWARE_DISKLABEL is not set
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    CONFIG_KARMA_PARTITION=y
    CONFIG_EFI_PARTITION=y
    # CONFIG_SYSV68_PARTITION is not set
    # CONFIG_CMDLINE_PARTITION is not set
    CONFIG_BLOCK_COMPAT=y
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    CONFIG_CFQ_GROUP_IOSCHED=y
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"
    CONFIG_PREEMPT_NOTIFIERS=y
    CONFIG_UNINLINE_SPIN_UNLOCK=y
    CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
    CONFIG_MUTEX_SPIN_ON_OWNER=y
    CONFIG_RWSEM_SPIN_ON_OWNER=y
    CONFIG_ARCH_USE_QUEUE_RWLOCK=y
    CONFIG_QUEUE_RWLOCK=y
    CONFIG_FREEZER=y
    # Processor type and features
    CONFIG_ZONE_DMA=y
    CONFIG_SMP=y
    CONFIG_X86_MPPARSE=y
    # CONFIG_X86_EXTENDED_PLATFORM is not set
    # CONFIG_X86_INTEL_LPSS is not set
    CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
    CONFIG_SCHED_OMIT_FRAME_POINTER=y
    CONFIG_HYPERVISOR_GUEST=y
    CONFIG_PARAVIRT=y
    # CONFIG_PARAVIRT_DEBUG is not set
    # CONFIG_PARAVIRT_SPINLOCKS is not set
    CONFIG_XEN=y
    CONFIG_XEN_DOM0=y
    CONFIG_XEN_PVHVM=y
    CONFIG_XEN_MAX_DOMAIN_MEMORY=500
    CONFIG_XEN_SAVE_RESTORE=y
    # CONFIG_XEN_DEBUG_FS is not set
    CONFIG_XEN_PVH=y
    CONFIG_KVM_GUEST=y
    # CONFIG_KVM_DEBUG_FS is not set
    CONFIG_PARAVIRT_TIME_ACCOUNTING=y
    CONFIG_PARAVIRT_CLOCK=y
    CONFIG_NO_BOOTMEM=y
    # CONFIG_MEMTEST is not set
    # CONFIG_MK8 is not set
    # CONFIG_MPSC is not set
    # CONFIG_MCORE2 is not set
    # CONFIG_MATOM is not set
    CONFIG_GENERIC_CPU=y
    CONFIG_X86_INTERNODE_CACHE_SHIFT=6
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_X86_TSC=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_CMOV=y
    CONFIG_X86_MINIMUM_CPU_FAMILY=64
    CONFIG_X86_DEBUGCTLMSR=y
    CONFIG_CPU_SUP_INTEL=y
    CONFIG_CPU_SUP_AMD=y
    CONFIG_CPU_SUP_CENTAUR=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_DMI=y
    CONFIG_GART_IOMMU=y
    CONFIG_CALGARY_IOMMU=y
    CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
    CONFIG_SWIOTLB=y
    CONFIG_IOMMU_HELPER=y
    # CONFIG_MAXSMP is not set
    CONFIG_NR_CPUS=128
    CONFIG_SCHED_SMT=y
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    # CONFIG_PREEMPT_VOLUNTARY is not set
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_COUNT=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_INTEL=y
    CONFIG_X86_MCE_AMD=y
    CONFIG_X86_MCE_THRESHOLD=y
    # CONFIG_X86_MCE_INJECT is not set
    CONFIG_X86_THERMAL_VECTOR=y
    CONFIG_X86_16BIT=y
    CONFIG_X86_ESPFIX64=y
    CONFIG_I8K=m
    CONFIG_MICROCODE=y
    CONFIG_MICROCODE_INTEL=y
    CONFIG_MICROCODE_AMD=y
    CONFIG_MICROCODE_OLD_INTERFACE=y
    CONFIG_MICROCODE_INTEL_EARLY=y
    CONFIG_MICROCODE_AMD_EARLY=y
    CONFIG_MICROCODE_EARLY=y
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m
    CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
    CONFIG_ARCH_DMA_ADDR_T_64BIT=y
    CONFIG_DIRECT_GBPAGES=y
    CONFIG_NUMA=y
    CONFIG_AMD_NUMA=y
    CONFIG_X86_64_ACPI_NUMA=y
    CONFIG_NODES_SPAN_OTHER_NODES=y
    # CONFIG_NUMA_EMU is not set
    CONFIG_NODES_SHIFT=6
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_DEFAULT=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ARCH_PROC_KCORE_TEXT=y
    CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_SPARSEMEM_MANUAL=y
    CONFIG_SPARSEMEM=y
    CONFIG_NEED_MULTIPLE_NODES=y
    CONFIG_HAVE_MEMORY_PRESENT=y
    CONFIG_SPARSEMEM_EXTREME=y
    CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
    CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
    CONFIG_SPARSEMEM_VMEMMAP=y
    CONFIG_HAVE_MEMBLOCK=y
    CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
    CONFIG_ARCH_DISCARD_MEMBLOCK=y
    # CONFIG_MOVABLE_NODE is not set
    # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
    # CONFIG_MEMORY_HOTPLUG is not set
    CONFIG_PAGEFLAGS_EXTENDED=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
    CONFIG_BALLOON_COMPACTION=y
    CONFIG_COMPACTION=y
    CONFIG_MIGRATION=y
    CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
    CONFIG_PHYS_ADDR_T_64BIT=y
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    CONFIG_MMU_NOTIFIER=y
    CONFIG_KSM=y
    CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
    CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
    # CONFIG_MEMORY_FAILURE is not set
    CONFIG_TRANSPARENT_HUGEPAGE=y
    CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
    # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
    CONFIG_CLEANCACHE=y
    CONFIG_FRONTSWAP=y
    # CONFIG_CMA is not set
    # CONFIG_ZSWAP is not set
    CONFIG_ZPOOL=y
    CONFIG_ZBUD=y
    CONFIG_ZSMALLOC=y
    # CONFIG_PGTABLE_MAPPING is not set
    CONFIG_GENERIC_EARLY_IOREMAP=y
    CONFIG_X86_CHECK_BIOS_CORRUPTION=y
    CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
    CONFIG_X86_RESERVE_LOW=64
    CONFIG_MTRR=y
    CONFIG_MTRR_SANITIZER=y
    CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
    CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
    CONFIG_X86_PAT=y
    CONFIG_ARCH_USES_PG_UNCACHED=y
    CONFIG_ARCH_RANDOM=y
    CONFIG_X86_SMAP=y
    CONFIG_EFI=y
    # CONFIG_EFI_STUB is not set
    CONFIG_SECCOMP=y
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    CONFIG_HZ_300=y
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=300
    CONFIG_SCHED_HRTICK=y
    CONFIG_KEXEC=y
    # CONFIG_KEXEC_FILE is not set
    # CONFIG_CRASH_DUMP is not set
    CONFIG_KEXEC_JUMP=y
    CONFIG_PHYSICAL_START=0x1000000
    CONFIG_RELOCATABLE=y
    # CONFIG_RANDOMIZE_BASE is not set
    CONFIG_PHYSICAL_ALIGN=0x1000000
    CONFIG_HOTPLUG_CPU=y
    # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
    # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
    # CONFIG_COMPAT_VDSO is not set
    # CONFIG_CMDLINE_BOOL is not set
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
    CONFIG_USE_PERCPU_NUMA_NODE_ID=y
    # Power management and ACPI options
    CONFIG_ARCH_HIBERNATION_HEADER=y
    CONFIG_SUSPEND=y
    CONFIG_SUSPEND_FREEZER=y
    CONFIG_HIBERNATE_CALLBACKS=y
    CONFIG_HIBERNATION=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_PM_SLEEP=y
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_AUTOSLEEP=y
    # CONFIG_PM_WAKELOCKS is not set
    CONFIG_PM_RUNTIME=y
    CONFIG_PM=y
    CONFIG_PM_DEBUG=y
    # CONFIG_PM_ADVANCED_DEBUG is not set
    # CONFIG_PM_TEST_SUSPEND is not set
    CONFIG_PM_SLEEP_DEBUG=y
    CONFIG_PM_TRACE=y
    CONFIG_PM_TRACE_RTC=y
    # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
    CONFIG_ACPI=y
    CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
    CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
    CONFIG_ACPI_SLEEP=y
    # CONFIG_ACPI_PROCFS_POWER is not set
    # CONFIG_ACPI_EC_DEBUGFS is not set
    CONFIG_ACPI_AC=y
    CONFIG_ACPI_BATTERY=y
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_VIDEO=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_DOCK=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_HOTPLUG_CPU=y
    # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
    CONFIG_ACPI_THERMAL=y
    CONFIG_ACPI_NUMA=y
    CONFIG_ACPI_CUSTOM_DSDT_FILE=""
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
    # CONFIG_ACPI_DEBUG is not set
    # CONFIG_ACPI_PCI_SLOT is not set
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=y
    # CONFIG_ACPI_SBS is not set
    # CONFIG_ACPI_HED is not set
    # CONFIG_ACPI_CUSTOM_METHOD is not set
    # CONFIG_ACPI_BGRT is not set
    # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
    CONFIG_HAVE_ACPI_APEI=y
    CONFIG_HAVE_ACPI_APEI_NMI=y
    # CONFIG_ACPI_APEI is not set
    CONFIG_ACPI_EXTLOG=y
    # CONFIG_SFI is not set
    # CPU Frequency scaling
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_GOV_COMMON=y
    CONFIG_CPU_FREQ_STAT=m
    CONFIG_CPU_FREQ_STAT_DETAILS=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=y
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
    # x86 CPU frequency scaling drivers
    CONFIG_X86_INTEL_PSTATE=y
    # CONFIG_X86_PCC_CPUFREQ is not set
    CONFIG_X86_ACPI_CPUFREQ=y
    CONFIG_X86_ACPI_CPUFREQ_CPB=y
    # CONFIG_X86_POWERNOW_K8 is not set
    # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
    # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
    # CONFIG_X86_P4_CLOCKMOD is not set
    # shared options
    # CONFIG_X86_SPEEDSTEP_LIB is not set
    # CPU Idle
    CONFIG_CPU_IDLE=y
    CONFIG_CPU_IDLE_GOV_LADDER=y
    CONFIG_CPU_IDLE_GOV_MENU=y
    # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
    CONFIG_INTEL_IDLE=y
    # Memory power savings
    # CONFIG_I7300_IDLE is not set
    # Bus options (PCI etc.)
    CONFIG_PCI=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_XEN=y
    CONFIG_PCI_DOMAINS=y
    CONFIG_PCIEPORTBUS=y
    CONFIG_PCIEAER=y
    # CONFIG_PCIE_ECRC is not set
    # CONFIG_PCIEAER_INJECT is not set
    CONFIG_PCIEASPM=y
    # CONFIG_PCIEASPM_DEBUG is not set
    CONFIG_PCIEASPM_DEFAULT=y
    # CONFIG_PCIEASPM_POWERSAVE is not set
    # CONFIG_PCIEASPM_PERFORMANCE is not set
    CONFIG_PCIE_PME=y
    CONFIG_PCI_MSI=y
    # CONFIG_PCI_DEBUG is not set
    # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
    # CONFIG_PCI_STUB is not set
    CONFIG_XEN_PCIDEV_FRONTEND=y
    CONFIG_HT_IRQ=y
    CONFIG_PCI_ATS=y
    # CONFIG_PCI_IOV is not set
    CONFIG_PCI_PRI=y
    CONFIG_PCI_PASID=y
    # CONFIG_PCI_IOAPIC is not set
    CONFIG_PCI_LABEL=y
    # PCI host controller drivers
    CONFIG_ISA_DMA_API=y
    CONFIG_AMD_NB=y
    CONFIG_PCCARD=y
    CONFIG_PCMCIA=y
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_CARDBUS=y
    # PC-card bridges
    CONFIG_YENTA=y
    CONFIG_YENTA_O2=y
    CONFIG_YENTA_RICOH=y
    CONFIG_YENTA_TI=y
    CONFIG_YENTA_ENE_TUNE=y
    CONFIG_YENTA_TOSHIBA=y
    # CONFIG_PD6729 is not set
    # CONFIG_I82092 is not set
    CONFIG_PCCARD_NONSTATIC=y
    # CONFIG_HOTPLUG_PCI is not set
    # CONFIG_RAPIDIO is not set
    CONFIG_X86_SYSFB=y
    # Executable file formats / Emulations
    CONFIG_BINFMT_ELF=y
    CONFIG_COMPAT_BINFMT_ELF=y
    CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
    CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
    CONFIG_BINFMT_SCRIPT=y
    # CONFIG_HAVE_AOUT is not set
    CONFIG_BINFMT_MISC=y
    CONFIG_COREDUMP=y
    CONFIG_IA32_EMULATION=y
    # CONFIG_IA32_AOUT is not set
    CONFIG_X86_X32=y
    CONFIG_COMPAT=y
    CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
    CONFIG_SYSVIPC_COMPAT=y
    CONFIG_KEYS_COMPAT=y
    CONFIG_X86_DEV_DMA_OPS=y
    CONFIG_IOSF_MBI=m
    CONFIG_PMC_ATOM=y
    CONFIG_NET=y
    CONFIG_COMPAT_NETLINK_MESSAGES=y
    # Networking options
    CONFIG_PACKET=y
    # CONFIG_PACKET_DIAG is not set
    CONFIG_UNIX=y
    # CONFIG_UNIX_DIAG is not set
    CONFIG_XFRM=y
    CONFIG_XFRM_ALGO=y
    CONFIG_XFRM_USER=y
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_XFRM_MIGRATE is not set
    # CONFIG_XFRM_STATISTICS is not set
    CONFIG_XFRM_IPCOMP=m
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    # CONFIG_IP_FIB_TRIE_STATS is not set
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_VERBOSE=y
    CONFIG_IP_ROUTE_CLASSID=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    CONFIG_IP_PNP_BOOTP=y
    CONFIG_IP_PNP_RARP=y
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE_DEMUX is not set
    CONFIG_NET_IP_TUNNEL=y
    CONFIG_IP_MROUTE=y
    # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    CONFIG_SYN_COOKIES=y
    CONFIG_NET_IPVTI=m
    # CONFIG_NET_UDP_TUNNEL is not set
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_XFRM_TUNNEL=m
    CONFIG_INET_TUNNEL=y
    CONFIG_INET_XFRM_MODE_TRANSPORT=m
    CONFIG_INET_XFRM_MODE_TUNNEL=m
    CONFIG_INET_XFRM_MODE_BEET=m
    CONFIG_INET_LRO=y
    CONFIG_INET_DIAG=m
    CONFIG_INET_TCP_DIAG=m
    CONFIG_INET_UDP_DIAG=m
    CONFIG_TCP_CONG_ADVANCED=y
    # CONFIG_TCP_CONG_BIC is not set
    # CONFIG_TCP_CONG_CUBIC is not set
    # CONFIG_TCP_CONG_WESTWOOD is not set
    # CONFIG_TCP_CONG_HTCP is not set
    # CONFIG_TCP_CONG_HSTCP is not set
    # CONFIG_TCP_CONG_HYBLA is not set
    CONFIG_TCP_CONG_VEGAS=y
    # CONFIG_TCP_CONG_SCALABLE is not set
    # CONFIG_TCP_CONG_LP is not set
    # CONFIG_TCP_CONG_VENO is not set
    # CONFIG_TCP_CONG_YEAH is not set
    # CONFIG_TCP_CONG_ILLINOIS is not set
    CONFIG_DEFAULT_VEGAS=y
    # CONFIG_DEFAULT_RENO is not set
    CONFIG_DEFAULT_TCP_CONG="vegas"
    CONFIG_TCP_MD5SIG=y
    CONFIG_IPV6=y
    # CONFIG_IPV6_ROUTER_PREF is not set
    # CONFIG_IPV6_OPTIMISTIC_DAD is not set
    CONFIG_INET6_AH=y
    CONFIG_INET6_ESP=y
    # CONFIG_INET6_IPCOMP is not set
    # CONFIG_IPV6_MIP6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    CONFIG_INET6_XFRM_MODE_TRANSPORT=y
    CONFIG_INET6_XFRM_MODE_TUNNEL=y
    CONFIG_INET6_XFRM_MODE_BEET=y
    # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
    # CONFIG_IPV6_VTI is not set
    CONFIG_IPV6_SIT=y
    # CONFIG_IPV6_SIT_6RD is not set
    CONFIG_IPV6_NDISC_NODETYPE=y
    # CONFIG_IPV6_TUNNEL is not set
    # CONFIG_IPV6_GRE is not set
    # CONFIG_IPV6_MULTIPLE_TABLES is not set
    # CONFIG_IPV6_MROUTE is not set
    CONFIG_NETLABEL=y
    CONFIG_NETWORK_SECMARK=y
    CONFIG_NET_PTP_CLASSIFY=y
    # CONFIG_NETWORK_PHY_TIMESTAMPING is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    CONFIG_NETFILTER_ADVANCED=y
    CONFIG_BRIDGE_NETFILTER=y
    # Core Netfilter Configuration
    CONFIG_NETFILTER_NETLINK=y
    CONFIG_NETFILTER_NETLINK_ACCT=m
    # CONFIG_NETFILTER_NETLINK_QUEUE is not set
    CONFIG_NETFILTER_NETLINK_LOG=y
    CONFIG_NF_CONNTRACK=y
    CONFIG_NF_LOG_COMMON=m
    CONFIG_NF_CONNTRACK_MARK=y
    CONFIG_NF_CONNTRACK_SECMARK=y
    CONFIG_NF_CONNTRACK_PROCFS=y
    # CONFIG_NF_CONNTRACK_EVENTS is not set
    # CONFIG_NF_CONNTRACK_TIMEOUT is not set
    # CONFIG_NF_CONNTRACK_TIMESTAMP is not set
    CONFIG_NF_CONNTRACK_LABELS=y
    CONFIG_NF_CT_PROTO_DCCP=m
    CONFIG_NF_CT_PROTO_GRE=m
    CONFIG_NF_CT_PROTO_SCTP=m
    CONFIG_NF_CT_PROTO_UDPLITE=m
    CONFIG_NF_CONNTRACK_AMANDA=m
    CONFIG_NF_CONNTRACK_FTP=m
    CONFIG_NF_CONNTRACK_H323=m
    CONFIG_NF_CONNTRACK_IRC=m
    CONFIG_NF_CONNTRACK_BROADCAST=m
    CONFIG_NF_CONNTRACK_NETBIOS_NS=m
    CONFIG_NF_CONNTRACK_SNMP=m
    CONFIG_NF_CONNTRACK_PPTP=m
    CONFIG_NF_CONNTRACK_SANE=m
    CONFIG_NF_CONNTRACK_SIP=m
    CONFIG_NF_CONNTRACK_TFTP=m
    CONFIG_NF_CT_NETLINK=y
    CONFIG_NF_CT_NETLINK_TIMEOUT=m
    CONFIG_NF_NAT=m
    CONFIG_NF_NAT_NEEDED=y
    CONFIG_NF_NAT_PROTO_DCCP=m
    CONFIG_NF_NAT_PROTO_UDPLITE=m
    CONFIG_NF_NAT_PROTO_SCTP=m
    CONFIG_NF_NAT_AMANDA=m
    CONFIG_NF_NAT_FTP=m
    CONFIG_NF_NAT_IRC=m
    CONFIG_NF_NAT_SIP=m
    CONFIG_NF_NAT_TFTP=m
    CONFIG_NETFILTER_SYNPROXY=m
    CONFIG_NF_TABLES=m
    CONFIG_NF_TABLES_INET=m
    CONFIG_NFT_EXTHDR=m
    CONFIG_NFT_META=m
    CONFIG_NFT_CT=m
    CONFIG_NFT_RBTREE=m
    CONFIG_NFT_HASH=m
    CONFIG_NFT_COUNTER=m
    CONFIG_NFT_LOG=m
    CONFIG_NFT_LIMIT=m
    CONFIG_NFT_NAT=m
    CONFIG_NFT_REJECT=m
    CONFIG_NFT_REJECT_INET=m
    CONFIG_NFT_COMPAT=m
    CONFIG_NETFILTER_XTABLES=y
    # Xtables combined modules
    CONFIG_NETFILTER_XT_MARK=m
    CONFIG_NETFILTER_XT_CONNMARK=m
    # Xtables targets
    # CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
    # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
    # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
    CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
    # CONFIG_NETFILTER_XT_TARGET_CT is not set
    # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
    CONFIG_NETFILTER_XT_TARGET_HL=m
    # CONFIG_NETFILTER_XT_TARGET_HMARK is not set
    # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
    # CONFIG_NETFILTER_XT_TARGET_LED is not set
    CONFIG_NETFILTER_XT_TARGET_LOG=m
    # CONFIG_NETFILTER_XT_TARGET_MARK is not set
    CONFIG_NETFILTER_XT_NAT=m
    CONFIG_NETFILTER_XT_TARGET_NETMAP=m
    CONFIG_NETFILTER_XT_TARGET_NFLOG=y
    # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
    # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
    CONFIG_NETFILTER_XT_TARGET_RATEEST=m
    CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
    CONFIG_NETFILTER_XT_TARGET_TEE=m
    # CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
    # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
    CONFIG_NETFILTER_XT_TARGET_SECMARK=y
    CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
    # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
    # Xtables matches
    CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
    CONFIG_NETFILTER_XT_MATCH_BPF=m
    CONFIG_NETFILTER_XT_MATCH_CGROUP=m
    CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
    CONFIG_NETFILTER_XT_MATCH_COMMENT=m
    CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
    CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
    CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
    CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
    CONFIG_NETFILTER_XT_MATCH_CPU=m
    CONFIG_NETFILTER_XT_MATCH_DCCP=m
    CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
    CONFIG_NETFILTER_XT_MATCH_DSCP=m
    CONFIG_NETFILTER_XT_MATCH_ECN=m
    CONFIG_NETFILTER_XT_MATCH_ESP=m
    CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_HELPER=m
    CONFIG_NETFILTER_XT_MATCH_HL=m
    CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
    CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
    CONFIG_NETFILTER_XT_MATCH_L2TP=m
    CONFIG_NETFILTER_XT_MATCH_LENGTH=m
    CONFIG_NETFILTER_XT_MATCH_LIMIT=m
    CONFIG_NETFILTER_XT_MATCH_MAC=m
    CONFIG_NETFILTER_XT_MATCH_MARK=m
    CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
    CONFIG_NETFILTER_XT_MATCH_NFACCT=m
    CONFIG_NETFILTER_XT_MATCH_OSF=m
    CONFIG_NETFILTER_XT_MATCH_OWNER=m
    CONFIG_NETFILTER_XT_MATCH_POLICY=y
    CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
    CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
    CONFIG_NETFILTER_XT_MATCH_QUOTA=m
    CONFIG_NETFILTER_XT_MATCH_RATEEST=m
    CONFIG_NETFILTER_XT_MATCH_REALM=m
    CONFIG_NETFILTER_XT_MATCH_RECENT=m
    CONFIG_NETFILTER_XT_MATCH_SCTP=m
    CONFIG_NETFILTER_XT_MATCH_SOCKET=m
    CONFIG_NETFILTER_XT_MATCH_STATE=y
    CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
    CONFIG_NETFILTER_XT_MATCH_STRING=m
    CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_TIME=m
    CONFIG_NETFILTER_XT_MATCH_U32=m
    # CONFIG_IP_SET is not set
    # CONFIG_IP_VS is not set
    # IP: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV4=y
    CONFIG_NF_CONNTRACK_IPV4=y
    CONFIG_NF_CONNTRACK_PROC_COMPAT=y
    CONFIG_NF_LOG_ARP=m
    CONFIG_NF_LOG_IPV4=m
    CONFIG_NF_TABLES_IPV4=m
    CONFIG_NFT_CHAIN_ROUTE_IPV4=m
    CONFIG_NFT_CHAIN_NAT_IPV4=m
    CONFIG_NFT_REJECT_IPV4=m
    CONFIG_NF_TABLES_ARP=m
    CONFIG_NF_NAT_IPV4=m
    CONFIG_NF_NAT_SNMP_BASIC=m
    CONFIG_NF_NAT_PROTO_GRE=m
    CONFIG_NF_NAT_PPTP=m
    CONFIG_NF_NAT_H323=m
    CONFIG_IP_NF_IPTABLES=y
    # CONFIG_IP_NF_MATCH_AH is not set
    # CONFIG_IP_NF_MATCH_ECN is not set
    # CONFIG_IP_NF_MATCH_RPFILTER is not set
    # CONFIG_IP_NF_MATCH_TTL is not set
    CONFIG_IP_NF_FILTER=y
    CONFIG_IP_NF_TARGET_REJECT=y
    # CONFIG_IP_NF_TARGET_SYNPROXY is not set
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    # CONFIG_IP_NF_TARGET_NETMAP is not set
    # CONFIG_IP_NF_TARGET_REDIRECT is not set
    CONFIG_IP_NF_MANGLE=y
    # CONFIG_IP_NF_TARGET_CLUSTERIP is not set
    # CONFIG_IP_NF_TARGET_ECN is not set
    # CONFIG_IP_NF_TARGET_TTL is not set
    # CONFIG_IP_NF_RAW is not set
    # CONFIG_IP_NF_SECURITY is not set
    # CONFIG_IP_NF_ARPTABLES is not set
    # IPv6: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV6=y
    CONFIG_NF_CONNTRACK_IPV6=y
    CONFIG_NF_TABLES_IPV6=m
    CONFIG_NFT_CHAIN_ROUTE_IPV6=m
    CONFIG_NFT_CHAIN_NAT_IPV6=m
    CONFIG_NFT_REJECT_IPV6=m
    CONFIG_NF_LOG_IPV6=m
    CONFIG_NF_NAT_IPV6=m
    CONFIG_IP6_NF_IPTABLES=y
    CONFIG_IP6_NF_MATCH_AH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=y
    CONFIG_IP6_NF_MATCH_MH=m
    CONFIG_IP6_NF_MATCH_RPFILTER=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_TARGET_HL=m
    CONFIG_IP6_NF_FILTER=y
    CONFIG_IP6_NF_TARGET_REJECT=y
    CONFIG_IP6_NF_TARGET_SYNPROXY=m
    CONFIG_IP6_NF_MANGLE=y
    CONFIG_IP6_NF_RAW=m
    CONFIG_IP6_NF_SECURITY=m
    # CONFIG_IP6_NF_NAT is not set
    CONFIG_NF_TABLES_BRIDGE=m
    CONFIG_NFT_BRIDGE_META=m
    CONFIG_NFT_BRIDGE_REJECT=m
    CONFIG_NF_LOG_BRIDGE=m
    CONFIG_BRIDGE_NF_EBTABLES=m
    CONFIG_BRIDGE_EBT_BROUTE=m
    CONFIG_BRIDGE_EBT_T_FILTER=m
    CONFIG_BRIDGE_EBT_T_NAT=m
    CONFIG_BRIDGE_EBT_802_3=m
    CONFIG_BRIDGE_EBT_AMONG=m
    CONFIG_BRIDGE_EBT_ARP=m
    CONFIG_BRIDGE_EBT_IP=m
    CONFIG_BRIDGE_EBT_IP6=m
    CONFIG_BRIDGE_EBT_LIMIT=m
    CONFIG_BRIDGE_EBT_MARK=m
    CONFIG_BRIDGE_EBT_PKTTYPE=m
    CONFIG_BRIDGE_EBT_STP=m
    CONFIG_BRIDGE_EBT_VLAN=m
    CONFIG_BRIDGE_EBT_ARPREPLY=m
    CONFIG_BRIDGE_EBT_DNAT=m
    CONFIG_BRIDGE_EBT_MARK_T=m
    CONFIG_BRIDGE_EBT_REDIRECT=m
    CONFIG_BRIDGE_EBT_SNAT=m
    CONFIG_BRIDGE_EBT_LOG=m
    CONFIG_BRIDGE_EBT_NFLOG=m
    # CONFIG_IP_DCCP is not set
    # CONFIG_IP_SCTP is not set
    # CONFIG_RDS is not set
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_L2TP is not set
    CONFIG_STP=m
    CONFIG_GARP=m
    CONFIG_MRP=m
    CONFIG_BRIDGE=m
    CONFIG_BRIDGE_IGMP_SNOOPING=y
    CONFIG_BRIDGE_VLAN_FILTERING=y
    CONFIG_HAVE_NET_DSA=y
    CONFIG_VLAN_8021Q=m
    CONFIG_VLAN_8021Q_GVRP=y
    CONFIG_VLAN_8021Q_MVRP=y
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_PHONET is not set
    # CONFIG_6LOWPAN is not set
    # CONFIG_IEEE802154 is not set
    CONFIG_NET_SCHED=y
    # Queueing/Scheduling
    # CONFIG_NET_SCH_CBQ is not set
    # CONFIG_NET_SCH_HTB is not set
    # CONFIG_NET_SCH_HFSC is not set
    # CONFIG_NET_SCH_PRIO is not set
    # CONFIG_NET_SCH_MULTIQ is not set
    # CONFIG_NET_SCH_RED is not set
    # CONFIG_NET_SCH_SFB is not set
    # CONFIG_NET_SCH_SFQ is not set
    # CONFIG_NET_SCH_TEQL is not set
    # CONFIG_NET_SCH_TBF is not set
    # CONFIG_NET_SCH_GRED is not set
    # CONFIG_NET_SCH_DSMARK is not set
    # CONFIG_NET_SCH_NETEM is not set
    # CONFIG_NET_SCH_DRR is not set
    # CONFIG_NET_SCH_MQPRIO is not set
    # CONFIG_NET_SCH_CHOKE is not set
    # CONFIG_NET_SCH_QFQ is not set
    # CONFIG_NET_SCH_CODEL is not set
    # CONFIG_NET_SCH_FQ_CODEL is not set
    CONFIG_NET_SCH_FQ=m
    # CONFIG_NET_SCH_HHF is not set
    # CONFIG_NET_SCH_PIE is not set
    # CONFIG_NET_SCH_INGRESS is not set
    # CONFIG_NET_SCH_PLUG is not set
    # Classification
    CONFIG_NET_CLS=y
    # CONFIG_NET_CLS_BASIC is not set
    # CONFIG_NET_CLS_TCINDEX is not set
    # CONFIG_NET_CLS_ROUTE4 is not set
    # CONFIG_NET_CLS_FW is not set
    # CONFIG_NET_CLS_U32 is not set
    # CONFIG_NET_CLS_RSVP is not set
    # CONFIG_NET_CLS_RSVP6 is not set
    # CONFIG_NET_CLS_FLOW is not set
    # CONFIG_NET_CLS_CGROUP is not set
    CONFIG_NET_CLS_BPF=m
    CONFIG_NET_EMATCH=y
    CONFIG_NET_EMATCH_STACK=32
    # CONFIG_NET_EMATCH_CMP is not set
    # CONFIG_NET_EMATCH_NBYTE is not set
    # CONFIG_NET_EMATCH_U32 is not set
    # CONFIG_NET_EMATCH_META is not set
    # CONFIG_NET_EMATCH_TEXT is not set
    CONFIG_NET_CLS_ACT=y
    # CONFIG_NET_ACT_POLICE is not set
    # CONFIG_NET_ACT_GACT is not set
    # CONFIG_NET_ACT_MIRRED is not set
    # CONFIG_NET_ACT_IPT is not set
    # CONFIG_NET_ACT_NAT is not set
    # CONFIG_NET_ACT_PEDIT is not set
    # CONFIG_NET_ACT_SIMP is not set
    # CONFIG_NET_ACT_SKBEDIT is not set
    # CONFIG_NET_ACT_CSUM is not set
    CONFIG_NET_SCH_FIFO=y
    # CONFIG_DCB is not set
    CONFIG_DNS_RESOLVER=y
    # CONFIG_BATMAN_ADV is not set
    # CONFIG_OPENVSWITCH is not set
    # CONFIG_VSOCKETS is not set
    # CONFIG_NETLINK_MMAP is not set
    # CONFIG_NETLINK_DIAG is not set
    # CONFIG_NET_MPLS_GSO is not set
    # CONFIG_HSR is not set
    CONFIG_RPS=y
    CONFIG_RFS_ACCEL=y
    CONFIG_XPS=y
    # CONFIG_CGROUP_NET_PRIO is not set
    CONFIG_CGROUP_NET_CLASSID=y
    CONFIG_NET_RX_BUSY_POLL=y
    CONFIG_BQL=y
    # CONFIG_BPF_JIT is not set
    CONFIG_NET_FLOW_LIMIT=y
    # Network testing
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NET_TCPPROBE is not set
    # CONFIG_NET_DROP_MONITOR is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_CAN is not set
    # CONFIG_IRDA is not set
    CONFIG_BT=m
    CONFIG_BT_RFCOMM=m
    CONFIG_BT_RFCOMM_TTY=y
    CONFIG_BT_BNEP=m
    CONFIG_BT_BNEP_MC_FILTER=y
    CONFIG_BT_BNEP_PROTO_FILTER=y
    CONFIG_BT_HIDP=m
    # Bluetooth device drivers
    CONFIG_BT_HCIBTUSB=m
    CONFIG_BT_HCIBTSDIO=m
    CONFIG_BT_HCIUART=m
    CONFIG_BT_HCIUART_H4=y
    CONFIG_BT_HCIUART_BCSP=y
    CONFIG_BT_HCIUART_ATH3K=y
    CONFIG_BT_HCIUART_LL=y
    CONFIG_BT_HCIUART_3WIRE=y
    CONFIG_BT_HCIBCM203X=m
    CONFIG_BT_HCIBPA10X=m
    CONFIG_BT_HCIBFUSB=m
    CONFIG_BT_HCIDTL1=m
    CONFIG_BT_HCIBT3C=m
    CONFIG_BT_HCIBLUECARD=m
    CONFIG_BT_HCIBTUART=m
    CONFIG_BT_HCIVHCI=m
    CONFIG_BT_MRVL=m
    CONFIG_BT_MRVL_SDIO=m
    CONFIG_BT_ATH3K=m
    # CONFIG_AF_RXRPC is not set
    CONFIG_FIB_RULES=y
    CONFIG_WIRELESS=y
    CONFIG_WEXT_CORE=y
    CONFIG_WEXT_PROC=y
    CONFIG_CFG80211=y
    # CONFIG_NL80211_TESTMODE is not set
    # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
    # CONFIG_CFG80211_REG_DEBUG is not set
    CONFIG_CFG80211_DEFAULT_PS=y
    # CONFIG_CFG80211_DEBUGFS is not set
    # CONFIG_CFG80211_INTERNAL_REGDB is not set
    CONFIG_CFG80211_WEXT=y
    # CONFIG_LIB80211 is not set
    CONFIG_MAC80211=y
    CONFIG_MAC80211_HAS_RC=y
    CONFIG_MAC80211_RC_MINSTREL=y
    CONFIG_MAC80211_RC_MINSTREL_HT=y
    CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
    CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
    # CONFIG_MAC80211_MESH is not set
    CONFIG_MAC80211_LEDS=y
    # CONFIG_MAC80211_DEBUGFS is not set
    # CONFIG_MAC80211_MESSAGE_TRACING is not set
    # CONFIG_MAC80211_DEBUG_MENU is not set
    # CONFIG_WIMAX is not set
    CONFIG_RFKILL=y
    CONFIG_RFKILL_LEDS=y
    CONFIG_RFKILL_INPUT=y
    # CONFIG_NET_9P is not set
    # CONFIG_CAIF is not set
    # CONFIG_CEPH_LIB is not set
    # CONFIG_NFC is not set
    CONFIG_HAVE_BPF_JIT=y
    # Device Drivers
    # Generic Driver Options
    CONFIG_UEVENT_HELPER=y
    CONFIG_UEVENT_HELPER_PATH=""
    CONFIG_DEVTMPFS=y
    # CONFIG_DEVTMPFS_MOUNT is not set
    # CONFIG_STANDALONE is not set
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    # CONFIG_FIRMWARE_IN_KERNEL is not set
    CONFIG_EXTRA_FIRMWARE="iwlwifi-6000-4.ucode"
    CONFIG_EXTRA_FIRMWARE_DIR="firmware"
    # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    CONFIG_SYS_HYPERVISOR=y
    # CONFIG_GENERIC_CPU_DEVICES is not set
    CONFIG_GENERIC_CPU_AUTOPROBE=y
    CONFIG_REGMAP=y
    CONFIG_REGMAP_I2C=m
    CONFIG_DMA_SHARED_BUFFER=y
    # CONFIG_FENCE_TRACE is not set
    # Bus devices
    CONFIG_CONNECTOR=y
    CONFIG_PROC_EVENTS=y
    # CONFIG_MTD is not set
    CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
    # CONFIG_PARPORT is not set
    CONFIG_PNP=y
    CONFIG_PNP_DEBUG_MESSAGES=y
    # Protocols
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    # CONFIG_BLK_DEV_NULL_BLK is not set
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
    # CONFIG_ZRAM is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    # CONFIG_BLK_DEV_DRBD is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_NVME is not set
    # CONFIG_BLK_DEV_SKD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=4096
    # CONFIG_BLK_DEV_XIP is not set
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set
    CONFIG_XEN_BLKDEV_FRONTEND=y
    # CONFIG_XEN_BLKDEV_BACKEND is not set
    # CONFIG_VIRTIO_BLK is not set
    # CONFIG_BLK_DEV_HD is not set
    # CONFIG_BLK_DEV_RBD is not set
    # CONFIG_BLK_DEV_RSXX is not set
    # Misc devices
    # CONFIG_SENSORS_LIS3LV02D is not set
    # CONFIG_AD525X_DPOT is not set
    # CONFIG_DUMMY_IRQ is not set
    # CONFIG_IBM_ASM is not set
    # CONFIG_PHANTOM is not set
    # CONFIG_SGI_IOC4 is not set
    CONFIG_TIFM_CORE=m
    CONFIG_TIFM_7XX1=m
    # CONFIG_ICS932S401 is not set
    # CONFIG_ENCLOSURE_SERVICES is not set
    # CONFIG_HP_ILO is not set
    # CONFIG_APDS9802ALS is not set
    # CONFIG_ISL29003 is not set
    # CONFIG_ISL29020 is not set
    # CONFIG_SENSORS_TSL2550 is not set
    # CONFIG_SENSORS_BH1780 is not set
    # CONFIG_SENSORS_BH1770 is not set
    # CONFIG_SENSORS_APDS990X is not set
    # CONFIG_HMC6352 is not set
    # CONFIG_DS1682 is not set
    # CONFIG_VMWARE_BALLOON is not set
    # CONFIG_BMP085_I2C is not set
    # CONFIG_USB_SWITCH_FSA9480 is not set
    # CONFIG_SRAM is not set
    # CONFIG_C2PORT is not set
    # EEPROM support
    # CONFIG_EEPROM_AT24 is not set
    # CONFIG_EEPROM_LEGACY is not set
    # CONFIG_EEPROM_MAX6875 is not set
    CONFIG_EEPROM_93CX6=m
    CONFIG_CB710_CORE=m
    # CONFIG_CB710_DEBUG is not set
    CONFIG_CB710_DEBUG_ASSUMPTIONS=y
    # Texas Instruments shared transport line discipline
    # CONFIG_SENSORS_LIS3_I2C is not set
    # Altera FPGA firmware download module
    # CONFIG_ALTERA_STAPL is not set
    # CONFIG_VMWARE_VMCI is not set
    # Intel MIC Bus Driver
    # CONFIG_INTEL_MIC_BUS is not set
    # Intel MIC Host Driver
    # Intel MIC Card Driver
    # CONFIG_GENWQE is not set
    # CONFIG_ECHO is not set
    CONFIG_HAVE_IDE=y
    # CONFIG_IDE is not set
    # SCSI device support
    CONFIG_SCSI_MOD=y
    # CONFIG_RAID_ATTRS is not set
    CONFIG_SCSI=y
    CONFIG_SCSI_DMA=y
    # CONFIG_SCSI_NETLINK is not set
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=y
    # CONFIG_CHR_DEV_SCH is not set
    CONFIG_SCSI_CONSTANTS=y
    # CONFIG_SCSI_LOGGING is not set
    # CONFIG_SCSI_SCAN_ASYNC is not set
    # SCSI Transports
    CONFIG_SCSI_SPI_ATTRS=y
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # CONFIG_SCSI_SAS_ATTRS is not set
    # CONFIG_SCSI_SAS_LIBSAS is not set
    # CONFIG_SCSI_SRP_ATTRS is not set
    # CONFIG_SCSI_LOWLEVEL is not set
    # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
    # CONFIG_SCSI_DH is not set
    # CONFIG_SCSI_OSD_INITIATOR is not set
    CONFIG_ATA=y
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_VERBOSE_ERROR=y
    CONFIG_ATA_ACPI=y
    # CONFIG_SATA_ZPODD is not set
    CONFIG_SATA_PMP=y
    # Controllers with non-SFF native interface
    CONFIG_SATA_AHCI=y
    # CONFIG_SATA_AHCI_PLATFORM is not set
    # CONFIG_SATA_INIC162X is not set
    # CONFIG_SATA_ACARD_AHCI is not set
    # CONFIG_SATA_SIL24 is not set
    CONFIG_ATA_SFF=y
    # SFF controllers with custom DMA interface
    # CONFIG_PDC_ADMA is not set
    # CONFIG_SATA_QSTOR is not set
    # CONFIG_SATA_SX4 is not set
    CONFIG_ATA_BMDMA=y
    # SATA SFF controllers with BMDMA
    CONFIG_ATA_PIIX=y
    # CONFIG_SATA_MV is not set
    # CONFIG_SATA_NV is not set
    # CONFIG_SATA_PROMISE is not set
    # CONFIG_SATA_SIL is not set
    # CONFIG_SATA_SIS is not set
    # CONFIG_SATA_SVW is not set
    # CONFIG_SATA_ULI is not set
    # CONFIG_SATA_VIA is not set
    # CONFIG_SATA_VITESSE is not set
    # PATA SFF controllers with BMDMA
    # CONFIG_PATA_ALI is not set
    CONFIG_PATA_AMD=y
    # CONFIG_PATA_ARTOP is not set
    # CONFIG_PATA_ATIIXP is not set
    # CONFIG_PATA_ATP867X is not set
    # CONFIG_PATA_CMD64X is not set
    # CONFIG_PATA_CYPRESS is not set
    # CONFIG_PATA_EFAR is not set
    # CONFIG_PATA_HPT366 is not set
    # CONFIG_PATA_HPT37X is not set
    # CONFIG_PATA_HPT3X2N is not set
    # CONFIG_PATA_HPT3X3 is not set
    # CONFIG_PATA_IT8213 is not set
    # CONFIG_PATA_IT821X is not set
    # CONFIG_PATA_JMICRON is not set
    # CONFIG_PATA_MARVELL is not set
    # CONFIG_PATA_NETCELL is not set
    # CONFIG_PATA_NINJA32 is not set
    # CONFIG_PATA_NS87415 is not set
    CONFIG_PATA_OLDPIIX=y
    # CONFIG_PATA_OPTIDMA is not set
    # CONFIG_PATA_PDC2027X is not set
    # CONFIG_PATA_PDC_OLD is not set
    # CONFIG_PATA_RADISYS is not set
    # CONFIG_PATA_RDC is not set
    CONFIG_PATA_SCH=y
    # CONFIG_PATA_SERVERWORKS is not set
    # CONFIG_PATA_SIL680 is not set
    # CONFIG_PATA_SIS is not set
    # CONFIG_PATA_TOSHIBA is not set
    # CONFIG_PATA_TRIFLEX is not set
    # CONFIG_PATA_VIA is not set
    # CONFIG_PATA_WINBOND is not set
    # PIO-only SFF controllers
    # CONFIG_PATA_CMD640_PCI is not set
    # CONFIG_PATA_MPIIX is not set
    # CONFIG_PATA_NS87410 is not set
    # CONFIG_PATA_OPTI is not set
    # CONFIG_PATA_PCMCIA is not set
    # CONFIG_PATA_RZ1000 is not set
    # Generic fallback / legacy drivers
    # CONFIG_PATA_ACPI is not set
    # CONFIG_ATA_GENERIC is not set
    # CONFIG_PATA_LEGACY is not set
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=y
    CONFIG_MD_AUTODETECT=y
    # CONFIG_MD_LINEAR is not set
    # CONFIG_MD_RAID0 is not set
    # CONFIG_MD_RAID1 is not set
    # CONFIG_MD_RAID10 is not set
    # CONFIG_MD_RAID456 is not set
    # CONFIG_MD_MULTIPATH is not set
    # CONFIG_MD_FAULTY is not set
    CONFIG_BCACHE=m
    # CONFIG_BCACHE_DEBUG is not set
    # CONFIG_BCACHE_CLOSURES_DEBUG is not set
    CONFIG_BLK_DEV_DM_BUILTIN=y
    CONFIG_BLK_DEV_DM=y
    # CONFIG_DM_DEBUG is not set
    CONFIG_DM_CRYPT=y
    # CONFIG_DM_SNAPSHOT is not set
    # CONFIG_DM_THIN_PROVISIONING is not set
    # CONFIG_DM_CACHE is not set
    # CONFIG_DM_ERA is not set
    CONFIG_DM_MIRROR=y
    # CONFIG_DM_LOG_USERSPACE is not set
    # CONFIG_DM_RAID is not set
    CONFIG_DM_ZERO=y
    # CONFIG_DM_MULTIPATH is not set
    # CONFIG_DM_DELAY is not set
    # CONFIG_DM_UEVENT is not set
    # CONFIG_DM_FLAKEY is not set
    # CONFIG_DM_VERITY is not set
    # CONFIG_DM_SWITCH is not set
    # CONFIG_TARGET_CORE is not set
    # CONFIG_FUSION is not set
    # IEEE 1394 (FireWire) support
    # CONFIG_FIREWIRE is not set
    # CONFIG_FIREWIRE_NOSY is not set
    # CONFIG_I2O is not set
    # CONFIG_MACINTOSH_DRIVERS is not set
    CONFIG_NETDEVICES=y
    CONFIG_MII=m
    CONFIG_NET_CORE=y
    CONFIG_BONDING=m
    CONFIG_DUMMY=m
    # CONFIG_EQUALIZER is not set
    # CONFIG_NET_FC is not set
    # CONFIG_IFB is not set
    # CONFIG_NET_TEAM is not set
    # CONFIG_MACVLAN is not set
    # CONFIG_VXLAN is not set
    CONFIG_NETCONSOLE=y
    CONFIG_NETPOLL=y
    CONFIG_NET_POLL_CONTROLLER=y
    CONFIG_TUN=y
    # CONFIG_VETH is not set
    # CONFIG_VIRTIO_NET is not set
    # CONFIG_NLMON is not set
    # CONFIG_ARCNET is not set
    # CAIF transport drivers
    CONFIG_VHOST_NET=m
    CONFIG_VHOST_RING=m
    CONFIG_VHOST=m
    # Distributed Switch Architecture drivers
    # CONFIG_NET_DSA_MV88E6XXX is not set
    # CONFIG_NET_DSA_MV88E6060 is not set
    # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
    # CONFIG_NET_DSA_MV88E6131 is not set
    # CONFIG_NET_DSA_MV88E6123_61_65 is not set
    CONFIG_ETHERNET=y
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_NET_VENDOR_ADAPTEC is not set
    # CONFIG_NET_VENDOR_ALTEON is not set
    # CONFIG_ALTERA_TSE is not set
    # CONFIG_NET_VENDOR_AMD is not set
    # CONFIG_NET_XGENE is not set
    CONFIG_NET_VENDOR_ARC=y
    # CONFIG_NET_VENDOR_ATHEROS is not set
    # CONFIG_NET_VENDOR_BROADCOM is not set
    # CONFIG_NET_VENDOR_BROCADE is not set
    # CONFIG_NET_VENDOR_CHELSIO is not set
    # CONFIG_NET_VENDOR_CISCO is not set
    # CONFIG_CX_ECAT is not set
    # CONFIG_DNET is not set
    # CONFIG_NET_VENDOR_DEC is not set
    # CONFIG_NET_VENDOR_DLINK is not set
    # CONFIG_NET_VENDOR_EMULEX is not set
    # CONFIG_NET_VENDOR_EXAR is not set
    # CONFIG_NET_VENDOR_FUJITSU is not set
    # CONFIG_NET_VENDOR_HP is not set
    CONFIG_NET_VENDOR_INTEL=y
    # CONFIG_E100 is not set
    # CONFIG_E1000 is not set
    CONFIG_E1000E=y
    # CONFIG_IGB is not set
    # CONFIG_IGBVF is not set
    # CONFIG_IXGB is not set
    # CONFIG_IXGBE is not set
    # CONFIG_IXGBEVF is not set
    # CONFIG_I40E is not set
    # CONFIG_I40EVF is not set
    # CONFIG_NET_VENDOR_I825XX is not set
    # CONFIG_IP1000 is not set
    # CONFIG_JME is not set
    # CONFIG_NET_VENDOR_MARVELL is not set
    # CONFIG_NET_VENDOR_MELLANOX is not set
    # CONFIG_NET_VENDOR_MICREL is not set
    # CONFIG_NET_VENDOR_MYRI is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NET_VENDOR_NATSEMI is not set
    # CONFIG_NET_VENDOR_NVIDIA is not set
    # CONFIG_NET_VENDOR_OKI is not set
    # CONFIG_ETHOC is not set
    # CONFIG_NET_PACKET_ENGINE is not set
    # CONFIG_NET_VENDOR_QLOGIC is not set
    # CONFIG_NET_VENDOR_REALTEK is not set
    # CONFIG_NET_VENDOR_RDC is not set
    # CONFIG_NET_VENDOR_SAMSUNG is not set
    # CONFIG_NET_VENDOR_SEEQ is not set
    # CONFIG_NET_VENDOR_SILAN is not set
    # CONFIG_NET_VENDOR_SIS is not set
    # CONFIG_SFC is not set
    # CONFIG_NET_VENDOR_SMSC is not set
    # CONFIG_NET_VENDOR_STMICRO is not set
    # CONFIG_NET_VENDOR_SUN is not set
    # CONFIG_NET_VENDOR_TEHUTI is not set
    # CONFIG_NET_VENDOR_TI is not set
    # CONFIG_NET_VENDOR_VIA is not set
    # CONFIG_NET_VENDOR_WIZNET is not set
    # CONFIG_NET_VENDOR_XIRCOM is not set
    CONFIG_FDDI=y
    # CONFIG_DEFXX is not set
    # CONFIG_SKFP is not set
    # CONFIG_HIPPI is not set
    # CONFIG_NET_SB1000 is not set
    CONFIG_PHYLIB=y
    # MII PHY device drivers
    # CONFIG_AT803X_PHY is not set
    # CONFIG_AMD_PHY is not set
    # CONFIG_MARVELL_PHY is not set
    # CONFIG_DAVICOM_PHY is not set
    # CONFIG_QSEMI_PHY is not set
    # CONFIG_LXT_PHY is not set
    # CONFIG_CICADA_PHY is not set
    # CONFIG_VITESSE_PHY is not set
    # CONFIG_SMSC_PHY is not set
    # CONFIG_BROADCOM_PHY is not set
    # CONFIG_BCM7XXX_PHY is not set
    # CONFIG_BCM87XX_PHY is not set
    # CONFIG_ICPLUS_PHY is not set
    # CONFIG_REALTEK_PHY is not set
    # CONFIG_NATIONAL_PHY is not set
    # CONFIG_STE10XP is not set
    # CONFIG_LSI_ET1011C_PHY is not set
    # CONFIG_MICREL_PHY is not set
    # CONFIG_FIXED_PHY is not set
    # CONFIG_MDIO_BITBANG is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    CONFIG_USB_NET_DRIVERS=y
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_RTL8152 is not set
    CONFIG_USB_USBNET=m
    CONFIG_USB_NET_AX8817X=m
    CONFIG_USB_NET_AX88179_178A=m
    CONFIG_USB_NET_CDCETHER=m
    CONFIG_USB_NET_CDC_EEM=m
    CONFIG_USB_NET_CDC_NCM=m
    # CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
    CONFIG_USB_NET_CDC_MBIM=m
    CONFIG_USB_NET_DM9601=m
    # CONFIG_USB_NET_SR9700 is not set
    # CONFIG_USB_NET_SR9800 is not set
    CONFIG_USB_NET_SMSC75XX=m
    CONFIG_USB_NET_SMSC95XX=m
    CONFIG_USB_NET_GL620A=m
    CONFIG_USB_NET_NET1080=m
    CONFIG_USB_NET_PLUSB=m
    CONFIG_USB_NET_MCS7830=m
    CONFIG_USB_NET_RNDIS_HOST=m
    CONFIG_USB_NET_CDC_SUBSET=m
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_KC2190=y
    CONFIG_USB_NET_ZAURUS=m
    CONFIG_USB_NET_CX82310_ETH=m
    CONFIG_USB_NET_KALMIA=m
    CONFIG_USB_NET_QMI_WWAN=m
    # CONFIG_USB_HSO is not set
    # CONFIG_USB_NET_INT51X1 is not set
    # CONFIG_USB_IPHETH is not set
    # CONFIG_USB_SIERRA_NET is not set
    # CONFIG_USB_VL600 is not set
    CONFIG_WLAN=y
    # CONFIG_PCMCIA_RAYCS is not set
    # CONFIG_LIBERTAS_THINFIRM is not set
    # CONFIG_AIRO is not set
    # CONFIG_ATMEL is not set
    # CONFIG_AT76C50X_USB is not set
    # CONFIG_AIRO_CS is not set
    # CONFIG_PCMCIA_WL3501 is not set
    # CONFIG_PRISM54 is not set
    # CONFIG_USB_ZD1201 is not set
    # CONFIG_USB_NET_RNDIS_WLAN is not set
    # CONFIG_RTL8180 is not set
    CONFIG_RTL8187=m
    CONFIG_RTL8187_LEDS=y
    # CONFIG_ADM8211 is not set
    # CONFIG_MAC80211_HWSIM is not set
    # CONFIG_MWL8K is not set
    # CONFIG_ATH_CARDS is not set
    # CONFIG_B43 is not set
    # CONFIG_B43LEGACY is not set
    # CONFIG_BRCMSMAC is not set
    # CONFIG_BRCMFMAC is not set
    # CONFIG_HOSTAP is not set
    # CONFIG_IPW2100 is not set
    # CONFIG_IPW2200 is not set
    CONFIG_IWLWIFI=y
    CONFIG_IWLWIFI_LEDS=y
    CONFIG_IWLDVM=y
    # CONFIG_IWLMVM is not set
    # Debugging Options
    # CONFIG_IWLWIFI_DEBUG is not set
    # CONFIG_IWLWIFI_DEVICE_TRACING is not set
    # CONFIG_IWL4965 is not set
    # CONFIG_IWL3945 is not set
    # CONFIG_LIBERTAS is not set
    # CONFIG_HERMES is not set
    # CONFIG_P54_COMMON is not set
    # CONFIG_RT2X00 is not set
    # CONFIG_RTL_CARDS is not set
    # CONFIG_WL_TI is not set
    # CONFIG_ZD1211RW is not set
    # CONFIG_MWIFIEX is not set
    # CONFIG_CW1200 is not set
    # CONFIG_RSI_91X is not set
    # Enable WiMAX (Networking options) to see the WiMAX drivers
    # CONFIG_WAN is not set
    CONFIG_XEN_NETDEV_FRONTEND=y
    # CONFIG_XEN_NETDEV_BACKEND is not set
    # CONFIG_VMXNET3 is not set
    # CONFIG_ISDN is not set
    # Input device support
    CONFIG_INPUT=y
    CONFIG_INPUT_FF_MEMLESS=y
    CONFIG_INPUT_POLLDEV=y
    CONFIG_INPUT_SPARSEKMAP=y
    # CONFIG_INPUT_MATRIXKMAP is not set
    # Userland interfaces
    CONFIG_INPUT_MOUSEDEV=y
    # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    # CONFIG_INPUT_JOYDEV is not set
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set
    # Input Device Drivers
    CONFIG_INPUT_KEYBOARD=y
    # CONFIG_KEYBOARD_ADP5588 is not set
    # CONFIG_KEYBOARD_ADP5589 is not set
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_QT1070 is not set
    # CONFIG_KEYBOARD_QT2160 is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_TCA6416 is not set
    # CONFIG_KEYBOARD_TCA8418 is not set
    # CONFIG_KEYBOARD_LM8323 is not set
    # CONFIG_KEYBOARD_LM8333 is not set
    # CONFIG_KEYBOARD_MAX7359 is not set
    # CONFIG_KEYBOARD_MCS is not set
    # CONFIG_KEYBOARD_MPR121 is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_KEYBOARD_OPENCORES is not set
    # CONFIG_KEYBOARD_STOWAWAY is not set
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_MOUSE_PS2_ALPS=y
    CONFIG_MOUSE_PS2_LOGIPS2PP=y
    CONFIG_MOUSE_PS2_SYNAPTICS=y
    CONFIG_MOUSE_PS2_CYPRESS=y
    CONFIG_MOUSE_PS2_LIFEBOOK=y
    CONFIG_MOUSE_PS2_TRACKPOINT=y
    # CONFIG_MOUSE_PS2_ELANTECH is not set
    # CONFIG_MOUSE_PS2_SENTELIC is not set
    # CONFIG_MOUSE_PS2_TOUCHKIT is not set
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_APPLETOUCH is not set
    # CONFIG_MOUSE_BCM5974 is not set
    # CONFIG_MOUSE_CYAPA is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    CONFIG_MOUSE_SYNAPTICS_I2C=y
    # CONFIG_MOUSE_SYNAPTICS_USB is not set
    CONFIG_INPUT_JOYSTICK=y
    # CONFIG_JOYSTICK_ANALOG is not set
    # CONFIG_JOYSTICK_A3D is not set
    # CONFIG_JOYSTICK_ADI is not set
    # CONFIG_JOYSTICK_COBRA is not set
    # CONFIG_JOYSTICK_GF2K is not set
    # CONFIG_JOYSTICK_GRIP is not set
    # CONFIG_JOYSTICK_GRIP_MP is not set
    # CONFIG_JOYSTICK_GUILLEMOT is not set
    # CONFIG_JOYSTICK_INTERACT is not set
    # CONFIG_JOYSTICK_SIDEWINDER is not set
    # CONFIG_JOYSTICK_TMDC is not set
    # CONFIG_JOYSTICK_IFORCE is not set
    # CONFIG_JOYSTICK_WARRIOR is not set
    # CONFIG_JOYSTICK_MAGELLAN is not set
    # CONFIG_JOYSTICK_SPACEORB is not set
    # CONFIG_JOYSTICK_SPACEBALL is not set
    # CONFIG_JOYSTICK_STINGER is not set
    # CONFIG_JOYSTICK_TWIDJOY is not set
    # CONFIG_JOYSTICK_ZHENHUA is not set
    # CONFIG_JOYSTICK_AS5011 is not set
    # CONFIG_JOYSTICK_JOYDUMP is not set
    CONFIG_JOYSTICK_XPAD=m
    CONFIG_JOYSTICK_XPAD_FF=y
    CONFIG_JOYSTICK_XPAD_LEDS=y
    # CONFIG_INPUT_TABLET is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    CONFIG_INPUT_MISC=y
    # CONFIG_INPUT_AD714X is not set
    # CONFIG_INPUT_BMA150 is not set
    CONFIG_INPUT_PCSPKR=m
    # CONFIG_INPUT_MMA8450 is not set
    # CONFIG_INPUT_MPU3050 is not set
    # CONFIG_INPUT_APANEL is not set
    # CONFIG_INPUT_ATLAS_BTNS is not set
    # CONFIG_INPUT_ATI_REMOTE2 is not set
    # CONFIG_INPUT_KEYSPAN_REMOTE is not set
    # CONFIG_INPUT_KXTJ9 is not set
    # CONFIG_INPUT_POWERMATE is not set
    # CONFIG_INPUT_YEALINK is not set
    # CONFIG_INPUT_CM109 is not set
    # CONFIG_INPUT_UINPUT is not set
    # CONFIG_INPUT_PCF8574 is not set
    # CONFIG_INPUT_ADXL34X is not set
    # CONFIG_INPUT_IMS_PCU is not set
    # CONFIG_INPUT_CMA3000 is not set
    CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
    # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
    # Hardware I/O ports
    CONFIG_SERIO=y
    CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # CONFIG_SERIO_ALTERA_PS2 is not set
    # CONFIG_SERIO_PS2MULT is not set
    # CONFIG_SERIO_ARC_PS2 is not set
    # CONFIG_GAMEPORT is not set
    # Character devices
    CONFIG_TTY=y
    CONFIG_VT=y
    CONFIG_CONSOLE_TRANSLATIONS=y
    CONFIG_VT_CONSOLE=y
    CONFIG_VT_CONSOLE_SLEEP=y
    CONFIG_HW_CONSOLE=y
    CONFIG_VT_HW_CONSOLE_BINDING=y
    CONFIG_UNIX98_PTYS=y
    # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
    # CONFIG_LEGACY_PTYS is not set
    CONFIG_SERIAL_NONSTANDARD=y
    # CONFIG_ROCKETPORT is not set
    # CONFIG_CYCLADES is not set
    # CONFIG_MOXA_INTELLIO is not set
    # CONFIG_MOXA_SMARTIO is not set
    # CONFIG_SYNCLINK is not set
    # CONFIG_SYNCLINKMP is not set
    # CONFIG_SYNCLINK_GT is not set
    # CONFIG_NOZOMI is not set
    # CONFIG_ISI is not set
    # CONFIG_N_HDLC is not set
    # CONFIG_N_GSM is not set
    # CONFIG_TRACE_SINK is not set
    # KCopy
    CONFIG_KCOPY=m
    # CONFIG_DEVKMEM is not set
    # Serial drivers
    CONFIG_SERIAL_EARLYCON=y
    CONFIG_SERIAL_8250=y
    # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_SERIAL_8250_DMA=y
    CONFIG_SERIAL_8250_PCI=y
    # CONFIG_SERIAL_8250_CS is not set
    CONFIG_SERIAL_8250_NR_UARTS=32
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    CONFIG_SERIAL_8250_EXTENDED=y
    CONFIG_SERIAL_8250_MANY_PORTS=y
    CONFIG_SERIAL_8250_SHARE_IRQ=y
    CONFIG_SERIAL_8250_DETECT_IRQ=y
    CONFIG_SERIAL_8250_RSA=y
    # CONFIG_SERIAL_8250_DW is not set
    # Non-8250 serial port support
    # CONFIG_SERIAL_MFD_HSU is not set
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    # CONFIG_SERIAL_JSM is not set
    # CONFIG_SERIAL_SCCNXP is not set
    # CONFIG_SERIAL_SC16IS7XX is not set
    # CONFIG_SERIAL_ALTERA_JTAGUART is not set
    # CONFIG_SERIAL_ALTERA_UART is not set
    # CONFIG_SERIAL_ARC is not set
    # CONFIG_SERIAL_RP2 is not set
    # CONFIG_SERIAL_FSL_LPUART is not set
    CONFIG_HVC_DRIVER=y
    CONFIG_HVC_IRQ=y
    CONFIG_HVC_XEN=y
    CONFIG_HVC_XEN_FRONTEND=y
    # CONFIG_VIRTIO_CONSOLE is not set
    # CONFIG_IPMI_HANDLER is not set
    CONFIG_HW_RANDOM=y
    # CONFIG_HW_RANDOM_TIMERIOMEM is not set
    CONFIG_HW_RANDOM_INTEL=m
    # CONFIG_HW_RANDOM_AMD is not set
    CONFIG_HW_RANDOM_VIA=m
    # CONFIG_HW_RANDOM_VIRTIO is not set
    CONFIG_NVRAM=y
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # PCMCIA character devices
    # CONFIG_SYNCLINK_CS is not set
    # CONFIG_CARDMAN_4000 is not set
    # CONFIG_CARDMAN_4040 is not set
    # CONFIG_IPWIRELESS is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    CONFIG_HPET=y
    # CONFIG_HPET_MMAP is not set
    # CONFIG_HANGCHECK_TIMER is not set
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set
    CONFIG_DEVPORT=y
    # I2C support
    CONFIG_I2C=y
    CONFIG_ACPI_I2C_OPREGION=y
    CONFIG_I2C_BOARDINFO=y
    CONFIG_I2C_COMPAT=y
    # CONFIG_I2C_CHARDEV is not set
    CONFIG_I2C_MUX=m
    # Multiplexer I2C Chip support
    # CONFIG_I2C_MUX_PCA9541 is not set
    CONFIG_I2C_HELPER_AUTO=y
    CONFIG_I2C_ALGOBIT=y
    # I2C Hardware Bus support
    # PC SMBus host controller drivers
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI1563 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    CONFIG_I2C_I801=y
    # CONFIG_I2C_ISCH is not set
    # CONFIG_I2C_ISMT is not set
    # CONFIG_I2C_PIIX4 is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    # CONFIG_I2C_VIA is not set
    # CONFIG_I2C_VIAPRO is not set
    # ACPI drivers
    # CONFIG_I2C_SCMI is not set
    # I2C system bus drivers (mostly embedded / system-on-chip)
    # CONFIG_I2C_DESIGNWARE_PLATFORM is not set
    # CONFIG_I2C_DESIGNWARE_PCI is not set
    # CONFIG_I2C_OCORES is not set
    # CONFIG_I2C_PCA_PLATFORM is not set
    # CONFIG_I2C_PXA_PCI is not set
    # CONFIG_I2C_SIMTEC is not set
    # CONFIG_I2C_XILINX is not set
    # External I2C/SMBus adapter drivers
    # CONFIG_I2C_DIOLAN_U2C is not set
    # CONFIG_I2C_PARPORT_LIGHT is not set
    # CONFIG_I2C_ROBOTFUZZ_OSIF is not set
    # CONFIG_I2C_TAOS_EVM is not set
    # CONFIG_I2C_TINY_USB is not set
    # Other I2C/SMBus bus drivers
    # CONFIG_I2C_STUB is not set
    # CONFIG_I2C_DEBUG_CORE is not set
    # CONFIG_I2C_DEBUG_ALGO is not set
    # CONFIG_I2C_DEBUG_BUS is not set
    # CONFIG_SPI is not set
    # CONFIG_SPMI is not set
    # CONFIG_HSI is not set
    # PPS support
    CONFIG_PPS=y
    # CONFIG_PPS_DEBUG is not set
    # CONFIG_NTP_PPS is not set
    # PPS clients support
    # CONFIG_PPS_CLIENT_KTIMER is not set
    # CONFIG_PPS_CLIENT_LDISC is not set
    # CONFIG_PPS_CLIENT_GPIO is not set
    # PPS generators support
    # PTP clock support
    CONFIG_PTP_1588_CLOCK=y
    # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
    CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
    # CONFIG_GPIOLIB is not set
    # CONFIG_W1 is not set
    CONFIG_POWER_SUPPLY=y
    # CONFIG_POWER_SUPPLY_DEBUG is not set
    # CONFIG_PDA_POWER is not set
    # CONFIG_TEST_POWER is not set
    # CONFIG_BATTERY_DS2780 is not set
    # CONFIG_BATTERY_DS2781 is not set
    # CONFIG_BATTERY_DS2782 is not set
    # CONFIG_BATTERY_SBS is not set
    # CONFIG_BATTERY_BQ27x00 is not set
    # CONFIG_BATTERY_MAX17040 is not set
    # CONFIG_BATTERY_MAX17042 is not set
    # CONFIG_CHARGER_ISP1704 is not set
    # CONFIG_CHARGER_MAX8903 is not set
    # CONFIG_CHARGER_LP8727 is not set
    # CONFIG_CHARGER_BQ2415X is not set
    # CONFIG_CHARGER_SMB347 is not set
    # CONFIG_POWER_RESET is not set
    # CONFIG_POWER_AVS is not set
    CONFIG_HWMON=y
    # CONFIG_HWMON_VID is not set
    # CONFIG_HWMON_DEBUG_CHIP is not set
    # Native drivers
    # CONFIG_SENSORS_ABITUGURU is not set
    # CONFIG_SENSORS_ABITUGURU3 is not set
    # CONFIG_SENSORS_AD7414 is not set
    # CONFIG_SENSORS_AD7418 is not set
    # CONFIG_SENSORS_ADM1021 is not set
    # CONFIG_SENSORS_ADM1025 is not set
    # CONFIG_SENSORS_ADM1026 is not set
    # CONFIG_SENSORS_ADM1029 is not set
    # CONFIG_SENSORS_ADM1031 is not set
    # CONFIG_SENSORS_ADM9240 is not set
    # CONFIG_SENSORS_ADT7410 is not set
    # CONFIG_SENSORS_ADT7411 is not set
    # CONFIG_SENSORS_ADT7462 is not set
    # CONFIG_SENSORS_ADT7470 is not set
    # CONFIG_SENSORS_ADT7475 is not set
    # CONFIG_SENSORS_ASC7621 is not set
    # CONFIG_SENSORS_K8TEMP is not set
    # CONFIG_SENSORS_K10TEMP is not set
    # CONFIG_SENSORS_FAM15H_POWER is not set
    # CONFIG_SENSORS_APPLESMC is not set
    # CONFIG_SENSORS_ASB100 is not set
    # CONFIG_SENSORS_ATXP1 is not set
    # CONFIG_SENSORS_DS620 is not set
    # CONFIG_SENSORS_DS1621 is not set
    # CONFIG_SENSORS_I5K_AMB is not set
    # CONFIG_SENSORS_F71805F is not set
    # CONFIG_SENSORS_F71882FG is not set
    # CONFIG_SENSORS_F75375S is not set
    # CONFIG_SENSORS_FSCHMD is not set
    # CONFIG_SENSORS_GL518SM is not set
    # CONFIG_SENSORS_GL520SM is not set
    # CONFIG_SENSORS_G760A is not set
    # CONFIG_SENSORS_G762 is not set
    # CONFIG_SENSORS_HIH6130 is not set
    # CONFIG_SENSORS_CORETEMP is not set
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_JC42 is not set
    # CONFIG_SENSORS_POWR1220 is not set
    # CONFIG_SENSORS_LINEAGE is not set
    # CONFIG_SENSORS_LTC2945 is not set
    # CONFIG_SENSORS_LTC4151 is not set
    # CONFIG_SENSORS_LTC4215 is not set
    # CONFIG_SENSORS_LTC4222 is not set
    # CONFIG_SENSORS_LTC4245 is not set
    # CONFIG_SENSORS_LTC4260 is not set
    # CONFIG_SENSORS_LTC4261 is not set
    # CONFIG_SENSORS_MAX16065 is not set
    # CONFIG_SENSORS_MAX1619 is not set
    # CONFIG_SENSORS_MAX1668 is not set
    # CONFIG_SENSORS_MAX197 is not set
    # CONFIG_SENSORS_MAX6639 is not set
    # CONFIG_SENSORS_MAX6642 is not set
    # CONFIG_SENSORS_MAX6650 is not set
    # CONFIG_SENSORS_MAX6697 is not set
    # CONFIG_SENSORS_HTU21 is not set
    # CONFIG_SENSORS_MCP3021 is not set
    # CONFIG_SENSORS_LM63 is not set
    # CONFIG_SENSORS_LM73 is not set
    # CONFIG_SENSORS_LM75 is not set
    # CONFIG_SENSORS_LM77 is not set
    # CONFIG_SENSORS_LM78 is not set
    # CONFIG_SENSORS_LM80 is not set
    # CONFIG_SENSORS_LM83 is not set
    # CONFIG_SENSORS_LM85 is not set
    # CONFIG_SENSORS_LM87 is not set
    # CONFIG_SENSORS_LM90 is not set
    # CONFIG_SENSORS_LM92 is not set
    # CONFIG_SENSORS_LM93 is not set
    # CONFIG_SENSORS_LM95234 is not set
    # CONFIG_SENSORS_LM95241 is not set
    # CONFIG_SENSORS_LM95245 is not set
    # CONFIG_SENSORS_PC87360 is not set
    # CONFIG_SENSORS_PC87427 is not set
    # CONFIG_SENSORS_NTC_THERMISTOR is not set
    # CONFIG_SENSORS_NCT6683 is not set
    # CONFIG_SENSORS_NCT6775 is not set
    # CONFIG_SENSORS_PCF8591 is not set
    # CONFIG_PMBUS is not set
    # CONFIG_SENSORS_SHT21 is not set
    # CONFIG_SENSORS_SHTC1 is not set
    # CONFIG_SENSORS_SIS5595 is not set
    # CONFIG_SENSORS_DME1737 is not set
    # CONFIG_SENSORS_EMC1403 is not set
    # CONFIG_SENSORS_EMC2103 is not set
    # CONFIG_SENSORS_EMC6W201 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    # CONFIG_SENSORS_SMSC47M192 is not set
    # CONFIG_SENSORS_SMSC47B397 is not set
    # CONFIG_SENSORS_SCH56XX_COMMON is not set
    # CONFIG_SENSORS_SMM665 is not set
    # CONFIG_SENSORS_ADC128D818 is not set
    # CONFIG_SENSORS_ADS1015 is not set
    # CONFIG_SENSORS_ADS7828 is not set
    # CONFIG_SENSORS_AMC6821 is not set
    # CONFIG_SENSORS_INA209 is not set
    # CONFIG_SENSORS_INA2XX is not set
    # CONFIG_SENSORS_THMC50 is not set
    # CONFIG_SENSORS_TMP102 is not set
    # CONFIG_SENSORS_TMP103 is not set
    # CONFIG_SENSORS_TMP401 is not set
    # CONFIG_SENSORS_TMP421 is not set
    # CONFIG_SENSORS_VIA_CPUTEMP is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_VT1211 is not set
    # CONFIG_SENSORS_VT8231 is not set
    # CONFIG_SENSORS_W83781D is not set
    # CONFIG_SENSORS_W83791D is not set
    # CONFIG_SENSORS_W83792D is not set
    # CONFIG_SENSORS_W83793 is not set
    # CONFIG_SENSORS_W83795 is not set
    # CONFIG_SENSORS_W83L785TS is not set
    # CONFIG_SENSORS_W83L786NG is not set
    # CONFIG_SENSORS_W83627HF is not set
    # CONFIG_SENSORS_W83627EHF is not set
    # ACPI drivers
    # CONFIG_SENSORS_ACPI_POWER is not set
    # CONFIG_SENSORS_ATK0110 is not set
    CONFIG_THERMAL=y
    CONFIG_THERMAL_HWMON=y
    CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
    # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
    # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
    # CONFIG_THERMAL_GOV_FAIR_SHARE is not set
    CONFIG_THERMAL_GOV_STEP_WISE=y
    CONFIG_THERMAL_GOV_USER_SPACE=y
    # CONFIG_THERMAL_EMULATION is not set
    # CONFIG_INTEL_POWERCLAMP is not set
    CONFIG_X86_PKG_TEMP_THERMAL=m
    CONFIG_ACPI_INT3403_THERMAL=m
    # CONFIG_INTEL_SOC_DTS_THERMAL is not set
    # Texas Instruments thermal drivers
    # CONFIG_WATCHDOG is not set
    CONFIG_SSB_POSSIBLE=y
    # Sonics Silicon Backplane
    # CONFIG_SSB is not set
    CONFIG_BCMA_POSSIBLE=y
    # Broadcom specific AMBA
    # CONFIG_BCMA is not set
    # Multifunction device drivers
    # CONFIG_MFD_CORE is not set
    # CONFIG_MFD_AS3711 is not set
    # CONFIG_PMIC_ADP5520 is not set
    # CONFIG_MFD_BCM590XX is not set
    # CONFIG_MFD_AXP20X is not set
    # CONFIG_MFD_CROS_EC is not set
    # CONFIG_PMIC_DA903X is not set
    # CONFIG_MFD_DA9052_I2C is not set
    # CONFIG_MFD_DA9055 is not set
    # CONFIG_MFD_DA9063 is not set
    # CONFIG_MFD_MC13XXX_I2C is not set
    # CONFIG_HTC_PASIC3 is not set
    # CONFIG_LPC_ICH is not set
    # CONFIG_LPC_SCH is not set
    # CONFIG_INTEL_SOC_PMIC is not set
    # CONFIG_MFD_JANZ_CMODIO is not set
    # CONFIG_MFD_KEMPLD is not set
    # CONFIG_MFD_88PM800 is not set
    # CONFIG_MFD_88PM805 is not set
    # CONFIG_MFD_88PM860X is not set
    # CONFIG_MFD_MAX14577 is not set
    # CONFIG_MFD_MAX77686 is not set
    # CONFIG_MFD_MAX77693 is not set
    # CONFIG_MFD_MAX8907 is not set
    # CONFIG_MFD_MAX8925 is not set
    # CONFIG_MFD_MAX8997 is not set
    # CONFIG_MFD_MAX8998 is not set
    # CONFIG_MFD_VIPERBOARD is not set
    # CONFIG_MFD_RETU is not set
    # CONFIG_MFD_PCF50633 is not set
    # CONFIG_MFD_RDC321X is not set
    # CONFIG_MFD_RTSX_PCI is not set
    # CONFIG_MFD_RTSX_USB is not set
    # CONFIG_MFD_RC5T583 is not set
    # CONFIG_MFD_SEC_CORE is not set
    # CONFIG_MFD_SI476X_CORE is not set
    # CONFIG_MFD_SM501 is not set
    # CONFIG_MFD_SMSC is not set
    # CONFIG_ABX500_CORE is not set
    # CONFIG_MFD_SYSCON is not set
    # CONFIG_MFD_TI_AM335X_TSCADC is not set
    # CONFIG_MFD_LP3943 is not set
    # CONFIG_MFD_LP8788 is not set
    # CONFIG_MFD_PALMAS is not set
    # CONFIG_TPS6105X is not set
    # CONFIG_TPS6507X is not set
    # CONFIG_MFD_TPS65090 is not set
    # CONFIG_MFD_TPS65217 is not set
    # CONFIG_MFD_TPS65218 is not set
    # CONFIG_MFD_TPS6586X is not set
    # CONFIG_MFD_TPS80031 is not set
    # CONFIG_TWL4030_CORE is not set
    # CONFIG_TWL6040_CORE is not set
    # CONFIG_MFD_WL1273_CORE is not set
    # CONFIG_MFD_LM3533 is not set
    # CONFIG_MFD_TC3589X is not set
    # CONFIG_MFD_TMIO is not set
    # CONFIG_MFD_VX855 is not set
    # CONFIG_MFD_ARIZONA_I2C is not set
    # CONFIG_MFD_WM8400 is not set
    # CONFIG_MFD_WM831X_I2C is not set
    # CONFIG_MFD_WM8350_I2C is not set
    # CONFIG_MFD_WM8994 is not set
    # CONFIG_REGULATOR is not set
    CONFIG_MEDIA_SUPPORT=m
    # Multimedia core support
    CONFIG_MEDIA_CAMERA_SUPPORT=y
    CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
    CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
    CONFIG_MEDIA_RADIO_SUPPORT=y
    CONFIG_MEDIA_SDR_SUPPORT=y
    # CONFIG_MEDIA_RC_SUPPORT is not set
    # CONFIG_MEDIA_CONTROLLER is not set
    CONFIG_VIDEO_DEV=m
    CONFIG_VIDEO_V4L2=m
    # CONFIG_VIDEO_ADV_DEBUG is not set
    # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
    CONFIG_VIDEOBUF_GEN=m
    CONFIG_VIDEOBUF_VMALLOC=m
    CONFIG_VIDEOBUF2_CORE=m
    CONFIG_VIDEOBUF2_MEMOPS=m
    CONFIG_VIDEOBUF2_VMALLOC=m
    CONFIG_DVB_CORE=m
    CONFIG_DVB_NET=y
    # CONFIG_TTPCI_EEPROM is not set
    CONFIG_DVB_MAX_ADAPTERS=8
    # CONFIG_DVB_DYNAMIC_MINORS is not set
    # Media drivers
    CONFIG_MEDIA_USB_SUPPORT=y
    # Webcam devices
    CONFIG_USB_VIDEO_CLASS=m
    CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
    CONFIG_USB_GSPCA=m
    # CONFIG_USB_M5602 is not set
    # CONFIG_USB_STV06XX is not set
    # CONFIG_USB_GL860 is not set
    # CONFIG_USB_GSPCA_BENQ is not set
    # CONFIG_USB_GSPCA_CONEX is not set
    # CONFIG_USB_GSPCA_CPIA1 is not set
    # CONFIG_USB_GSPCA_DTCS033 is not set
    # CONFIG_USB_GSPCA_ETOMS is not set
    # CONFIG_USB_GSPCA_FINEPIX is not set
    # CONFIG_USB_GSPCA_JEILINJ is not set
    # CONFIG_USB_GSPCA_JL2005BCD is not set
    # CONFIG_USB_GSPCA_KINECT is not set
    # CONFIG_USB_GSPCA_KONICA is not set
    # CONFIG_USB_GSPCA_MARS is not set
    # CONFIG_USB_GSPCA_MR97310A is not set
    # CONFIG_USB_GSPCA_NW80X is not set
    # CONFIG_USB_GSPCA_OV519 is not set
    # CONFIG_USB_GSPCA_OV534 is not set
    # CONFIG_USB_GSPCA_OV534_9 is not set
    # CONFIG_USB_GSPCA_PAC207 is not set
    # CONFIG_USB_GSPCA_PAC7302 is not set
    # CONFIG_USB_GSPCA_PAC7311 is not set
    # CONFIG_USB_GSPCA_SE401 is not set
    # CONFIG_USB_GSPCA_SN9C2028 is not set
    # CONFIG_USB_GSPCA_SN9C20X is not set
    # CONFIG_USB_GSPCA_SONIXB is not set
    # CONFIG_USB_GSPCA_SONIXJ is not set
    # CONFIG_USB_GSPCA_SPCA500 is not set
    # CONFIG_USB_GSPCA_SPCA501 is not set
    # CONFIG_USB_GSPCA_SPCA505 is not set
    # CONFIG_USB_GSPCA_SPCA506 is not set
    # CONFIG_USB_GSPCA_SPCA508 is not set
    # CONFIG_USB_GSPCA_SPCA561 is not set
    # CONFIG_USB_GSPCA_SPCA1528 is not set
    # CONFIG_USB_GSPCA_SQ905 is not set
    # CONFIG_USB_GSPCA_SQ905C is not set
    # CONFIG_US

    You might want to try setting up early KMS.  That is, put the module in your initramfs explicitly so that it is loaded early... hence, 'early KMS'.
    Edit: You might want to also double check to make sure that the kernel that it being booted is matching up with the modules it is trying to load.  That is, if you move your kernel to put it on the ESP or if you sometimes don't keep /boot mounted, then you might want to do a "file -k /path/to/kernel" and make sure that whatever is in /usr/lib/modules matches.  There is the possibility that if the initramfs failed because it did not find this matchup, then the kernel and the built initramfs are not meant for each other.
    Last edited by WonderWoofy (2013-07-25 14:46:23)

  • FYI: Premiere 7 repeatable crash solved - nVidia issue

    Here is my story of hair pulling / frustration today.
    Symptoms:
    Windows 7 x64 / 12 GB RAM / RAID-0 / Flash drive / blah blah blah, my system hardware and OS are solid
    Premiere 7 worked fine yesterday
    Today Premiere 7 will crash anytime the Edit >> Effects tab or Edit >> Titles tab is selected
    Tried all the recommended vodoo in the articles, and nothing worked.
    Uninstall / re-install did not work
    Debugging error with Visual Studio shows a stack overflow error
    Folder  Users\<username>\AppData\Roaming\Adobe\Premiere Elements creates a mysterious new folder "G167 - 9-16-2008" everytime it crashes.
    In this folder is a file called "Trace Database.txt" which has the following text:
    ASL.MessagingService    1    5
    Master    1    10
    Most event viewer crash report entries show the following, no help:
    However on a second look, this entry was found in the sea of crash reports:
    Resolution:
    nvSCPAPI.dll is a 3D glasses driver / application nVidia installs by default with their driver.
    Yesterday I disabled it using an nVidia start menu application because I have no use for it
    Disabling this feature caused the Premiere crashes (of course it did, woudln't that be obvious to anyone?)
    Uninstalling the nVidia 3D vision application resolved the problem.

    Wish PE7 had an x64 version of the software, I have got memory low warnings several times now when it bumped up against 2 GB of used memory.
    I'm guessing that PrPro CS5 will be 64-bit, but some of that might be predicated on the actual release of Win7, and how well MS has done their SDK kit. If that happens (could also be CS5.5, or similar), I cannot imagine that PrE will be far behind.
    Adobe has been doing surveys of PrPro users and several of the questions in each have been around "would you accept a 64-bit ONLY program?" Obviously, that would shut the upgrade door on many, until they migrated to a 64-bit OS. That might be more of an issue with the population of PrE users, as they would be less likely to run out and buy a new workstation for this program. Still, many folk, who are new to NLE's, are springing for some flavor of 64-bit for other reasons. Only Adobe's surveys and some good guesses by marketing, can determine their path.
    Now, let's talk about your resources. I have 4GB on both machines (one with the 3GB switch, and one without). Still, we're not talking that much more RAM than you have.
    I have a plan, that I implement on all machines, and then employ when I am doing editing:
    The first thing that I do, before I do any editing, is clean out my system, using MSCONFIG to eliminate all unnecessary programs and Processes at boot. These are things like MS Messenger, iTunes Helper, Bonjour Services (I do need this for one progarm on my laptop, so I keep it there), and the like. These are little things that are usually installed by the OS, other programs, or the folk, who build the machine. Unless subsequent installs add this sort of stuff back, this is a one-shot deal.
    Next, I manually Exit from my AV, spyware sweepers and pop-up blockers.
    Last, I run a little utility, called EndItAll2, to then shut down all unnecessary programs and Processes (on a session basis, and not permanently, like MSCONFIG), prior to editing.
    This gets my machine in as lean, clean and mean a status, as I can. Then, I edit.
    I routinely work on some monster Projects with up to 8+ hours of material on the Timelines and 1000's of Assets. To date, I have never had one "out of resources" error. I am, however, doing SD Projects only - no HD yet.
    Don't know what programs/Processes you might have loaded, but that would be one of the first places that I'd look - if you have not done so already.
    Good luck,
    Hunt

  • [SOLVED] Strange character issue...

    I'm using Openbox, and sometimes (often) the text will mess up and start showing random characters in place of the characters that's supposed to be there.  I kill X and start it up again, and it's fixed until it happens again.  It usually happens after doing some package management and other system-related things, but a couple of times it's done it during a session where I didn't do any of those things.  This only happens in X/Openbox.
    I figured it was a locale problem, so I checked all of my locale settings multiple times and everything appears correct.  Then I figured it was maybe a key mapping problem, so I checked that KEYMAP was set to us, and it is.
    I have en_US.UTF-8 UTF-8 and ja_JP.UTF-8 UTF-8 enabled, and en_US.UTF-8 is my default...I use Terminus as my font for everything.  Any help with this is appreciated since I've spent two days trying to figure it out already and I just want to move on.
    Here's an example...Sometimes there'll be huge characters and Japanese kanji thrown in there.
    Last edited by rzrscm (2012-11-18 12:03:25)

    fritz wrote:
    rzrscm wrote:Is it possible that this is being caused because I'm not using a display manager?
    No. Xorg 1.13.04 does not work well with nvidia drivers.
    This problem is dealt with in several topics:
    https://bbs.archlinux.org/viewtopic.php?id=153138
    https://bbs.archlinux.org/viewtopic.php?id=152899
    https://bbs.archlinux.org/viewtopic.php?id=152837
    Only "solution" so far: Downgrading xorg.
    1.13.03 might be enough according to user corion's post).
    Alright...Thanks for the info.  I guess I was completely wrong in how I was thinking of the problem.  So, am I able to just downgrade the xorg-server package to solve the issue, or am I going to have to downgrade other related packages such as xorg-server-common?

Maybe you are looking for

  • How to print hard copy on client when form submit

    I am using JSP 1.2 and JSTL 1.0 . I have a situation where JSP sends dynamic content page to the client browser. On this page is a submit button. When the client clicks on submit, the content on that page gets printed to the default printer connected

  • IPod playlists out of order

    In iTunes, all the songs on a CD are still in the correct order and list the track numbers. But on my iPod, some albums are out of order. I checked and the iPod is not on shuffle in any way. I just browse to the artist and album, but the songs aren't

  • Creation of GR from Contract using bapi BAPI_GOODSMVT_CREATE

    Hi, As per requirement I need to create a GR for Contract line item. I tried to create using BAPI  BAPI_GOODSMVT_CREATE but It returns the error message. I tried with GM_CODE  '05', so could you please let me know which are the parameters I need to p

  • PO Approval Limit Setup

    Hi Guys, Can anyone help me understand where do we set the Approval Limit Amount for a specific position in the Position Approval Hirearchy. Thanks, Akash

  • Problem with a database

    hi all! i want the user to type in the name and the surname, then at the end of this program they get a score. but it is so accessibal that if you re-type your name in the name field you get back your old score. i'm having a few problems on class ggg