[SOLVED]NVIDIA Xorg Errors
I installed Xorg and the proprietary nvidia driver using the wiki, but when running xinit or startx I get errors such as no nvidia.ko, unable to connect to X server, and Nos such process server error
Rebooted and works fine
Last edited by duke11235 (2010-08-23 00:36:15)
New Progress!
I've managed to get my screen to go black during the server's run, instead of having my TTY just freeze!
I followed the instructions here
However, now I have the problem that the X server shuts down about two seconds after startup. I have confirmed that both of the xrandr commands are completed.
Here is my x log
Here is my x output
As you can see, we have "Screen 1 deleted because of no matching config section". I have no idea what that means.
The NVIDIA driver still appears to try setting mode "NULL" (maybe it isn't getting the available modes properly?)
At the end, there's this weird thing...
reporting 3 4 17 122
have a master to look out for
adjust shatters 0 1366
need to create shared pixmap 1(II) NVIDIA(GPU-0): Deleting GPU-0
Uhhh...why is it deleting my GPU? (I have no idea what it means by that)
UPDATE (again!)...
I HAVE LWM WINDOWS APPEARING! (but I had to stop the nvidia to get that)
I changed the ServerLayout to have Screen 0 be the "intel" screen.
Initially, input wasn't being handled at all, resulting in complete inability to do anything once x started
I managed to get input working by adding some xorg configs for my input devices (now I have fully-functional xorg, but without my nvidia card)
I still want to get my nvidia working.
Last edited by soccermiles (2013-12-22 19:31:50)
Similar Messages
-
[SOLVED] NVidia, Xorg, Output not reaching monitor?
Hardware...
====================================================
Computer: ASUS K55VD Laptop (UEFI Motherboard)
Processor: Intel i5
Graphics: NVidia GeForce 610M, also the Intel chip that I'm not using (I think)
Relevant System Information (I figure maybe the location of my initramfs is messing with driver installation?)...
====================================================
Partitioning...
sda1: /boot (FAT32)
sda2: / (ext4)
sda3: /home (ext4)
Boot: Syslinux EFI setup using efibootmgr (ESP: /boot, Syslinux: /boot/EFI/syslinux)
Driver package: "nvidia", corresponding libgl and lib32 stuff. NOTE: I know this is the wrong version, but my problem is _exactly_ the same with nvidia-304xx.
Xorg Configuration (no other conf files influencing outcome, no ~/.xinitrc)...
/etc/X11/xorg.conf.d/10-evdev.conf
/etc/X11/xorg.conf.d/10-quirks.conf
/etc/X11/xorg.conf.d/10-server.conf
/etc/X11/xorg.conf.d/20-nvidia.conf
Other Notes: The laptop originally came with Windows 8. At the time, I didn't want to spend a whole lot of time installing Arch, so I chose Ubuntu for the time being. While Ubuntu was installed, I noticed that the driver being used was called "Mesa", and certain applications didn't like that (NCAR's VAPOR, for example). Perhaps there's a problem with the hardware that's causing Ubuntu to choose an alternate install system, and now I'm running into that?
Problem...
====================================================
I've set everything up properly according to the Beginner's Guide, NVIDIA and Xorg pages.
I run startx.
At "Loading extension GLX", the whole TTY freezes (stops redrawing, can tell because cursor freezes in current state <on/off>).
At this point, I can still switch TTYs with C-M-F<n>, so it's just that one TTY.
I can type "exit", <Enter>, and then the server dies dramatically.
Here's the full output from the server, which had to be unjumbled by redirecting all output to a file
Here's my /var/log/Xorg.0.log, recovered after the test
I was even able to retrieve this glxinfo output by piping to a file!
Again, I was typing blind, so there's no real guarantee that the glxinfo output is, in fact, glxinfo output...
Analysis...
====================================================
I have no idea what the problem is on the server's shutdown, but I've got ideas about the rest of it.
I figure what's happening is that the server is starting just fine, but it isn't putting output on my monitor. It opens the twm environment, which starts with an open terminal. When I type "exit", <Enter>, the server shuts down again, as expected, but something goes wrong.
That's how it occurred to me to grab that glxinfo: 'glxinfo > ~/test'
Does the following mean that it's actually using the Intel graphics? (found this in Xorg log)
[ 1571.248] (--) PCI:*(0:0:2:0) :::this refers to the Intel graphics
[ 1571.248] (--) PCI: (0:1:0:0) :::this refers to the 610M
What does that asterisk (*) mean?
Does this line mean that my graphics card isn't hooked up to my monitor?
[ 1571.383] (--) NVIDIA(0): Valid display device(s) on GeForce 610M at PCI:1:0:0
[ 1571.383] (--) NVIDIA(0): none
Maybe I need to configure my monitor to be detected somehow?
I noticed two errors in the Xorg log that might be related...
[ 1571.385] (EE) NVIDIA(0): Failed to initiate mode change.
[ 1571.385] (EE) NVIDIA(0): Failed to complete mode change
Maybe there's a simple package installation that will fix everything?
If there's any more information you need, please ask.
Thanks!
PS: wgetpaste was EXTREMELY helpful!
Last edited by soccermiles (2013-12-22 23:23:40)New Progress!
I've managed to get my screen to go black during the server's run, instead of having my TTY just freeze!
I followed the instructions here
However, now I have the problem that the X server shuts down about two seconds after startup. I have confirmed that both of the xrandr commands are completed.
Here is my x log
Here is my x output
As you can see, we have "Screen 1 deleted because of no matching config section". I have no idea what that means.
The NVIDIA driver still appears to try setting mode "NULL" (maybe it isn't getting the available modes properly?)
At the end, there's this weird thing...
reporting 3 4 17 122
have a master to look out for
adjust shatters 0 1366
need to create shared pixmap 1(II) NVIDIA(GPU-0): Deleting GPU-0
Uhhh...why is it deleting my GPU? (I have no idea what it means by that)
UPDATE (again!)...
I HAVE LWM WINDOWS APPEARING! (but I had to stop the nvidia to get that)
I changed the ServerLayout to have Screen 0 be the "intel" screen.
Initially, input wasn't being handled at all, resulting in complete inability to do anything once x started
I managed to get input working by adding some xorg configs for my input devices (now I have fully-functional xorg, but without my nvidia card)
I still want to get my nvidia working.
Last edited by soccermiles (2013-12-22 19:31:50) -
(SOLVED) Compiz, GLX error even tough i start compiz with LIBGL_AWLAYS
Hi,
I have tried to read trough the wiki, google and forum. I cant get this to be solved?
I installed compis with:
# pacman -S compiz-fusion-gtk (no to emerald, emerald-themes and compiz-fusion-plugins-extra)
made sure metacity compositioning was off with gconf
then i added these:
gconftool-2 --set -t string /desktop/gnome/session/required_components/windowmanager compiz
gconftool-2 --set -t string /desktop/gnome/applications/window_manager/current /usr/bin/compiz
gconftool-2 --set -t string /desktop/gnome/applications/window_manager/default /usr/bin/compiz
Have added these to xorg.conf
ServerLayout:
Option "AIGLX" "true"
Device:
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "Accelmethod" "EXA"
added a section called "Extension" where i added:
Option "Composite" "Enable"
and a section "DRI" :
group "video"
mode 0660
If i launch compiz with :
LIBGL_ALWAYS_INDIRECT=1 compiz --replace --indirect-rendering
I still get the glx error! And i dont have the window borders. Read from the troubleshooting to activate the window decaritons, rezise and move, still the same.
Running Gnome with slim. And how should i launch the fusion-icon with a parameter? (ie LIBGL..) i get an error?
My specs: Dell d420, intel gma945 express
sincerely, THANKS!
#update 1: Dont know how, but it kinda works now think the problem was something with compiz-dekorator-gtk.
now my problem is, how to add it to startup?
Last edited by tiddylicious (2009-12-06 13:05:43)Solved:
_NO_ xorg.conf. -Also synaptics driver, and im loading into the environment from inittab. These did the trick ! -
(SOLVED) nvidia GT 650M driver 331.38 problem with bumblebee
Hello people. Since i updated my system to nvidia 338.38-3 via pacman the bumblebee service stopped working and now i have the following error when i started something with primusrun or optirun:
[ 2070.640091] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card
[ 2070.640141] [ERROR]Aborting because fallback start is disabled.
My bumblebee.conf it's like this:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
My xorg.conf.nvidia it's like this:
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "falsa"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
If someone could enlighten me i would apreciate it..Thanks in advance
Last edited by CyberNhull (2014-03-12 10:50:32)skualito wrote:
Try booting with this kernel parameter:
rcutree.rcu_idle_gp_delay=1
Thanks for the reply, i tried that and the error changed to:
[ 297.499172] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
I will post my log since it appears the graphics now is at least detected but not inicialized:
sudo cat /var/log/Xorg.8.log
[ 294.111]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 294.111] X Protocol Version 11, Revision 0
[ 294.111] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 294.111] Current Operating System: Linux Nhull-Greyk 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 294.111] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw rcutree.rcu_idle_gp_delay=1
[ 294.111] Build Date: 09 January 2014 08:47:24AM
[ 294.111]
[ 294.111] Current version of pixman: 0.32.4
[ 294.111] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 294.111] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 294.111] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Mar 11 10:51:03 2014
[ 294.111] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 294.111] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 294.111] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 294.111] (==) ServerLayout "Layout0"
[ 294.111] (==) No screen section available. Using defaults.
[ 294.111] (**) |-->Screen "Default Screen Section" (0)
[ 294.111] (**) | |-->Monitor "<default monitor>"
[ 294.111] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 294.111] (**) | |-->Device "DiscreteNvidia"
[ 294.111] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 294.111] (**) Option "AutoAddDevices" "false"
[ 294.111] (**) Option "AutoAddGPU" "false"
[ 294.111] (**) Not automatically adding devices
[ 294.111] (==) Automatically enabling devices
[ 294.111] (**) Not automatically adding GPU devices
[ 294.111] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 294.111] Entry deleted from font path.
[ 294.111] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 294.111] Entry deleted from font path.
[ 294.111] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 294.111] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 294.111] Entry deleted from font path.
[ 294.111] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 294.111] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 294.112] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 294.112] (==) |-->Input Device "<default pointer>"
[ 294.112] (==) |-->Input Device "<default keyboard>"
[ 294.112] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 294.112] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 294.112] (II) Loader magic: 0x804c80
[ 294.112] (II) Module ABI versions:
[ 294.112] X.Org ANSI C Emulation: 0.4
[ 294.112] X.Org Video Driver: 15.0
[ 294.112] X.Org XInput driver : 20.0
[ 294.112] X.Org Server Extension : 8.0
[ 294.112] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 294.112] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 294.112] setversion 1.4 failed: Permission denied
[ 294.113] (--) PCI:*(0:1:0:0) 10de:0fd1:144d:c0d1 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 294.113] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 294.113] Initializing built-in extension Generic Event Extension
[ 294.113] Initializing built-in extension SHAPE
[ 294.113] Initializing built-in extension MIT-SHM
[ 294.113] Initializing built-in extension XInputExtension
[ 294.113] Initializing built-in extension XTEST
[ 294.113] Initializing built-in extension BIG-REQUESTS
[ 294.113] Initializing built-in extension SYNC
[ 294.113] Initializing built-in extension XKEYBOARD
[ 294.113] Initializing built-in extension XC-MISC
[ 294.114] Initializing built-in extension SECURITY
[ 294.114] Initializing built-in extension XINERAMA
[ 294.114] Initializing built-in extension XFIXES
[ 294.114] Initializing built-in extension RENDER
[ 294.114] Initializing built-in extension RANDR
[ 294.114] Initializing built-in extension COMPOSITE
[ 294.114] Initializing built-in extension DAMAGE
[ 294.114] Initializing built-in extension MIT-SCREEN-SAVER
[ 294.114] Initializing built-in extension DOUBLE-BUFFER
[ 294.114] Initializing built-in extension RECORD
[ 294.114] Initializing built-in extension DPMS
[ 294.114] Initializing built-in extension Present
[ 294.114] Initializing built-in extension DRI3
[ 294.114] Initializing built-in extension X-Resource
[ 294.114] Initializing built-in extension XVideo
[ 294.114] Initializing built-in extension XVideo-MotionCompensation
[ 294.114] Initializing built-in extension XFree86-VidModeExtension
[ 294.114] Initializing built-in extension XFree86-DGA
[ 294.114] Initializing built-in extension XFree86-DRI
[ 294.114] Initializing built-in extension DRI2
[ 294.114] (II) "glx" will be loaded by default.
[ 294.114] (II) LoadModule: "dri2"
[ 294.114] (II) Module "dri2" already built-in
[ 294.114] (II) LoadModule: "glamoregl"
[ 294.114] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 294.135] (II) Module glamoregl: vendor="X.Org Foundation"
[ 294.135] compiled for 1.15.0, module version = 0.6.0
[ 294.135] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.135] (II) LoadModule: "glx"
[ 294.135] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 294.196] (II) Module glx: vendor="NVIDIA Corporation"
[ 294.197] compiled for 4.0.2, module version = 1.0.0
[ 294.197] Module class: X.Org Server Extension
[ 294.197] (II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
[ 294.197] Loading extension GLX
[ 294.197] (II) LoadModule: "nvidia"
[ 294.197] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 294.200] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 294.200] compiled for 4.0.2, module version = 1.0.0
[ 294.200] Module class: X.Org Video Driver
[ 294.200] (II) LoadModule: "mouse"
[ 294.200] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 294.201] (II) Module mouse: vendor="X.Org Foundation"
[ 294.201] compiled for 1.15.0, module version = 1.9.0
[ 294.201] Module class: X.Org XInput Driver
[ 294.201] ABI class: X.Org XInput driver, version 20.0
[ 294.201] (II) LoadModule: "kbd"
[ 294.201] (WW) Warning, couldn't open module kbd
[ 294.201] (II) UnloadModule: "kbd"
[ 294.201] (II) Unloading kbd
[ 294.202] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 294.202] (II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
[ 294.202] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 294.202] (--) using VT number 7
[ 294.202] (II) Loading sub module "fb"
[ 294.202] (II) LoadModule: "fb"
[ 294.202] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 294.203] (II) Module fb: vendor="X.Org Foundation"
[ 294.203] compiled for 1.15.0, module version = 1.0.0
[ 294.203] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.203] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 294.203] (II) Loading sub module "wfb"
[ 294.203] (II) LoadModule: "wfb"
[ 294.203] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 294.204] (II) Module wfb: vendor="X.Org Foundation"
[ 294.204] compiled for 1.15.0, module version = 1.0.0
[ 294.204] ABI class: X.Org ANSI C Emulation, version 0.4
[ 294.204] (II) Loading sub module "ramdac"
[ 294.204] (II) LoadModule: "ramdac"
[ 294.204] (II) Module "ramdac" already built-in
[ 294.204] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 294.204] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 294.204] (==) NVIDIA(0): RGB weight 888
[ 294.204] (==) NVIDIA(0): Default visual is TrueColor
[ 294.204] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 294.204] (**) NVIDIA(0): Option "NoLogo" "true"
[ 294.204] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 294.204] (**) NVIDIA(0): Option "UseEDID" "false"
[ 294.204] (**) NVIDIA(0): Option "UseDisplayDevice" "Screen1"
[ 294.204] (**) NVIDIA(0): Enabling 2D acceleration
[ 294.204] (**) NVIDIA(0): Ignoring EDIDs
[ 297.471] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 297.472] (II) NVIDIA(0): NVIDIA GPU GeForce GT 650M (GK107) at PCI:1:0:0 (GPU-0)
[ 297.472] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 297.472] (--) NVIDIA(0): VideoBIOS: 80.07.6a.00.0a
[ 297.472] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 297.475] (--) NVIDIA(0): Valid display device(s) on GeForce GT 650M at PCI:1:0:0
[ 297.475] (--) NVIDIA(0): CRT-0
[ 297.475] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 297.475] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
[ 297.475] (EE) NVIDIA(0): Set AllowEmptyInitialConfiguration if you want the server
[ 297.475] (EE) NVIDIA(0): to start anyway
[ 297.493] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 297.493] (II) UnloadModule: "nvidia"
[ 297.493] (II) UnloadSubModule: "wfb"
[ 297.493] (II) UnloadSubModule: "fb"
[ 297.493] (EE) Screen(s) found, but none have a usable configuration.
[ 297.493] (EE)
Fatal server error:
[ 297.493] (EE) no screens found(EE)
[ 297.493] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 297.493] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 297.493] (EE)
[ 297.493] (EE) Server terminated with error (1). Closing log file.
Last edited by CyberNhull (2014-03-11 10:59:41) -
HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION
I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone
How to solve this ?
#import <UIKit/UIKit.h>
int main(int argc, char *argv[]) {
NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
-> int retVal = UIApplicationMain(argc, argv, nil, nil);
[pool release];
return retVal; -
How i can solve 6753 airport error
how i can solve 6753 airport error?
IIRC, it's not uncommon to spot this after a firmware update to 7.6.1. And IIRC, wasn't there a 7.6.2 release today? Unplug the express, plug it back in, and generally this should self-resolve.
-
How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?
I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916) -
Hi,
How to catch or solve the 404 error in application.
Some time we are giving some file name but that file is not avialable at that time it will give 404 error. how to avoid this error.
If 404 error comes i want call some other file. Is it posible.
Thanks Advance.Yes, this is because IE 5.5 (?) and higher have this wacky "Show friendly HTTP error messages" setting. You can disable this by going to tools -> internet options -> advanced and unchecking "Show friendly HTTP error messages". However as the default IE setting has "Show friendly HTTP error messages" enabled this isn't a good solution.
I believe that if your error page is less than a certain size (in bytes) then IE defaults to it's own error page when "Show friendly HTTP error messages" are enabled. This size is something like 512 bytes or fewer in length.
So basically try making your error page larger (more than 512 bytes in size) and see if that works. -
Photoshop CS6 crashes with nVidia OpenGL Error Code:3
CS6 13.0.1.1 64 bit is crashing from time to time with the nVidia OpenGL Error Code:3.
It most often occurs when waking the system if it entered sleep mode while Photoshop was running but I also get it without entering sleep mode and it doesn't happen every time which makes troubleshooting a problem. I have to go in and kill the Photoshop.exe process as it remains running and prevents relaunching the program. Fortunately in most cases I can recover the file due to the autosave feature but that just depends on when the problem happens.
I have installed the latest nVidia GeForce 8800 drivers without resoltuion.
I'd been using CS6 for some time before the crashes started and have rebuilt the system since they started. Before rebuilding the system I mainly used 32 bit but am now using 64 bit exclusively. It may have also started after a nVidia update that was carried in Windows 7 updates. I have changed out the graphcis card with anohter 8800 so am sure it's a software issue.
If anyone has run in to this, I could really use some help resolving it.
Thanks,
Darvin Atkeson
LiquidMoonlight.comYou're several updates behind -- please go install the Photoshop updates.
But it looks like the error might be in a driver (or something that jumps into unknown code) - so you might want to update your video card driver from the GPU maker's website. And make sure that any third party plugins you have installed are up to date. -
"Error 16" solution doesn't solve problem, same error message pops up. Further steps?
Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16. Stumped!
Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
situation, I¹m afraid. I think I¹m going to have to start with a new drive
and import/update until I find the source of this issue.
Jim
"Error 16" solution doesn't solve problem, same error message pops up.
Further steps?
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop
General Discussion - View the full discussion
<https://forums.adobe.com/message/7154907#7154907>
Permissions problem. Open Terminal and copy/paste this line: sudo chmod -R
777 /Library/Application\ Support/Adobe Gene
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7154907#7154907 and clicking Correct¹ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Photoshop General
Discussion by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=4694> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
> -
HT201405 how to solve time machine error-1
how to solve time machine error-1
I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked! -
TS3297 How to solve -42110 unknown error?
Please, how can I solve -42110 unknown error?
ThanksTry the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes -
HT201210 pls solve my problem error 3194
pls solve my problem error 3194
Hello,
Check this:
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Hope it helps, -
HT203200 How can i solve the -50 error when downloading video from itunes??
How can I solve the -50 error when downloading video from itunes. The apple support people cannot even figure it out!??
The 2330 error often means some sort of damage to the filing system as might happen if the battery fell out while the disk was in use.
Try running a disk check to see if it finds and fixes any errors.
http://support.microsoft.com/?kbid=315265 -
[SOLVED] nvidia and xorg-server, slow start compared to nv
I've seen many similar topics but none that have been solved, therefore the new topic.
Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
Section "Device"
Identifier "Device0"
Driver "nvidia"
EndSection
The /var/log/Xorg.0.log when using nvidia:
[ 22.779]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 22.779] X Protocol Version 11, Revision 0
[ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 22.779] Build Date: 30 May 2012 07:24:13PM
[ 22.779]
[ 22.779] Current version of pixman: 0.26.0
[ 22.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
[ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.106] (==) No Layout section. Using the first Screen section.
[ 23.106] (==) No screen section available. Using defaults.
[ 23.106] (**) |-->Screen "Default Screen Section" (0)
[ 23.106] (**) | |-->Monitor "<default monitor>"
[ 23.106] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.106] (**) | |-->Device "Device0"
[ 23.106] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.106] (==) Automatically adding devices
[ 23.106] (==) Automatically enabling devices
[ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.219] Entry deleted from font path.
[ 23.414] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.414] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.414] (II) Loader magic: 0x7c58e0
[ 23.414] (II) Module ABI versions:
[ 23.414] X.Org ANSI C Emulation: 0.4
[ 23.414] X.Org Video Driver: 12.0
[ 23.414] X.Org XInput driver : 16.0
[ 23.414] X.Org Server Extension : 6.0
[ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.415] (II) LoadModule: "extmod"
[ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.487] (II) Module extmod: vendor="X.Org Foundation"
[ 23.487] compiled for 1.12.2, module version = 1.0.0
[ 23.487] Module class: X.Org Server Extension
[ 23.487] ABI class: X.Org Server Extension, version 6.0
[ 23.487] (II) Loading extension MIT-SCREEN-SAVER
[ 23.487] (II) Loading extension XFree86-VidModeExtension
[ 23.487] (II) Loading extension XFree86-DGA
[ 23.487] (II) Loading extension DPMS
[ 23.487] (II) Loading extension XVideo
[ 23.487] (II) Loading extension XVideo-MotionCompensation
[ 23.487] (II) Loading extension X-Resource
[ 23.487] (II) LoadModule: "dbe"
[ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.512] (II) Module dbe: vendor="X.Org Foundation"
[ 23.512] compiled for 1.12.2, module version = 1.0.0
[ 23.512] Module class: X.Org Server Extension
[ 23.512] ABI class: X.Org Server Extension, version 6.0
[ 23.512] (II) Loading extension DOUBLE-BUFFER
[ 23.512] (II) LoadModule: "glx"
[ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
[ 26.868] compiled for 4.0.2, module version = 1.0.0
[ 26.868] Module class: X.Org Server Extension
[ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 26.869] (II) Loading extension GLX
[ 26.869] (II) LoadModule: "record"
[ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.941] (II) Module record: vendor="X.Org Foundation"
[ 26.941] compiled for 1.12.2, module version = 1.13.0
[ 26.941] Module class: X.Org Server Extension
[ 26.941] ABI class: X.Org Server Extension, version 6.0
[ 26.941] (II) Loading extension RECORD
[ 26.941] (II) LoadModule: "dri"
[ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.011] (II) Module dri: vendor="X.Org Foundation"
[ 27.011] compiled for 1.12.2, module version = 1.0.0
[ 27.011] ABI class: X.Org Server Extension, version 6.0
[ 27.011] (II) Loading extension XFree86-DRI
[ 27.011] (II) LoadModule: "dri2"
[ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.046] (II) Module dri2: vendor="X.Org Foundation"
[ 27.047] compiled for 1.12.2, module version = 1.2.0
[ 27.047] ABI class: X.Org Server Extension, version 6.0
[ 27.047] (II) Loading extension DRI2
[ 27.047] (II) LoadModule: "nvidia"
[ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.306] compiled for 4.0.2, module version = 1.0.0
[ 27.306] Module class: X.Org Video Driver
[ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
[ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 27.617] (++) using VT number 7
[ 27.678] (II) Loading sub module "fb"
[ 27.678] (II) LoadModule: "fb"
[ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.870] (II) Module fb: vendor="X.Org Foundation"
[ 27.870] compiled for 1.12.2, module version = 1.0.0
[ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.870] (II) Loading sub module "wfb"
[ 27.870] (II) LoadModule: "wfb"
[ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.879] (II) Module wfb: vendor="X.Org Foundation"
[ 27.879] compiled for 1.12.2, module version = 1.0.0
[ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.879] (II) Loading sub module "ramdac"
[ 27.879] (II) LoadModule: "ramdac"
[ 27.879] (II) Module "ramdac" already built-in
[ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 27.934] (==) NVIDIA(0): RGB weight 888
[ 27.934] (==) NVIDIA(0): Default visual is TrueColor
[ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
[ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
[ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
[ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
[ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
[ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
[ 30.789] (--) NVIDIA(0): clock
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
[ 30.789] (--) NVIDIA(0): LVDS
[ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 30.836] (==) NVIDIA(0):
[ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.836] (==) NVIDIA(0): will be used as the requested mode.
[ 30.836] (==) NVIDIA(0):
[ 30.836] (II) NVIDIA(0): Validated modes:
[ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
[ 31.892] (--) NVIDIA(0): option
[ 31.892] (--) Depth 24 pixmap format is 32 bpp
[ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 34.862] (II) Loading extension NV-GLX
[ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 37.299] (==) NVIDIA(0): Backing store disabled
[ 37.299] (==) NVIDIA(0): Silken mouse enabled
[ 37.300] (==) NVIDIA(0): DPMS enabled
[ 37.300] (II) Loading extension NV-CONTROL
[ 37.300] (II) Loading extension XINERAMA
[ 37.300] (II) Loading sub module "dri2"
[ 37.300] (II) LoadModule: "dri2"
[ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 37.300] (II) Module dri2: vendor="X.Org Foundation"
[ 37.300] compiled for 1.12.2, module version = 1.2.0
[ 37.300] ABI class: X.Org Server Extension, version 6.0
[ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
[ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 37.301] (==) RandR enabled
[ 37.301] (II) Initializing built-in extension Generic Event Extension
[ 37.301] (II) Initializing built-in extension SHAPE
[ 37.301] (II) Initializing built-in extension MIT-SHM
[ 37.301] (II) Initializing built-in extension XInputExtension
[ 37.301] (II) Initializing built-in extension XTEST
[ 37.301] (II) Initializing built-in extension BIG-REQUESTS
[ 37.301] (II) Initializing built-in extension SYNC
[ 37.301] (II) Initializing built-in extension XKEYBOARD
[ 37.301] (II) Initializing built-in extension XC-MISC
[ 37.301] (II) Initializing built-in extension SECURITY
[ 37.301] (II) Initializing built-in extension XINERAMA
[ 37.301] (II) Initializing built-in extension XFIXES
[ 37.301] (II) Initializing built-in extension RENDER
[ 37.301] (II) Initializing built-in extension RANDR
[ 37.301] (II) Initializing built-in extension COMPOSITE
[ 37.301] (II) Initializing built-in extension DAMAGE
[ 37.302] (II) Initializing extension GLX
[ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.717] (II) LoadModule: "evdev"
[ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.769] (II) Module evdev: vendor="X.Org Foundation"
[ 38.769] compiled for 1.12.0, module version = 2.7.0
[ 38.769] Module class: X.Org XInput Driver
[ 38.769] ABI class: X.Org XInput driver, version 16.0
[ 38.769] (II) Using input driver 'evdev' for 'Power Button'
[ 38.769] (**) Power Button: always reports core events
[ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.769] (--) evdev: Power Button: Found keys
[ 38.769] (II) evdev: Power Button: Configuring as keyboard
[ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 38.769] (**) Option "xkb_rules" "evdev"
[ 38.769] (**) Option "xkb_model" "evdev"
[ 38.769] (**) Option "xkb_layout" "se"
[ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
[ 38.835] (**) Video Bus: always reports core events
[ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 38.835] (--) evdev: Video Bus: Found keys
[ 38.835] (II) evdev: Video Bus: Configuring as keyboard
[ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 38.836] (**) Option "xkb_rules" "evdev"
[ 38.836] (**) Option "xkb_model" "evdev"
[ 38.836] (**) Option "xkb_layout" "se"
[ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.837] (II) Using input driver 'evdev' for 'Power Button'
[ 38.837] (**) Power Button: always reports core events
[ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.837] (--) evdev: Power Button: Found keys
[ 38.837] (II) evdev: Power Button: Configuring as keyboard
[ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 38.837] (**) Option "xkb_rules" "evdev"
[ 38.837] (**) Option "xkb_model" "evdev"
[ 38.837] (**) Option "xkb_layout" "se"
[ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 38.838] (II) No input driver specified, ignoring this device.
[ 38.838] (II) This device may have been added with another device file.
[ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
[ 38.838] (**) Sleep Button: always reports core events
[ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 38.839] (--) evdev: Sleep Button: Found keys
[ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
[ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 38.839] (**) Option "xkb_rules" "evdev"
[ 38.839] (**) Option "xkb_model" "evdev"
[ 38.839] (**) Option "xkb_layout" "se"
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.842] (**) Logitech USB Receiver: always reports core events
[ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 38.844] (II) No input driver specified, ignoring this device.
[ 38.844] (II) This device may have been added with another device file.
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.844] (**) Logitech USB Receiver: always reports core events
[ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found keys
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 38.845] (**) Option "xkb_rules" "evdev"
[ 38.845] (**) Option "xkb_model" "evdev"
[ 38.845] (**) Option "xkb_layout" "se"
[ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 38.846] (**) USB 2.0 PC Camera: always reports core events
[ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
[ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 38.846] (**) Option "xkb_rules" "evdev"
[ 38.846] (**) Option "xkb_model" "evdev"
[ 38.847] (**) Option "xkb_layout" "se"
[ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
[ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 38.848] (**) Option "xkb_rules" "evdev"
[ 38.848] (**) Option "xkb_model" "evdev"
[ 38.848] (**) Option "xkb_layout" "se"
[ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 38.848] (II) LoadModule: "synaptics"
[ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
[ 38.911] compiled for 1.12.1, module version = 1.6.1
[ 38.911] Module class: X.Org XInput Driver
[ 38.911] ABI class: X.Org XInput driver, version 16.0
[ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.911] (**) Option "Device" "/dev/input/event9"
[ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 38.911] (**) Option "TapButton1" "1"
[ 38.911] (**) Option "TapButton2" "2"
[ 38.911] (**) Option "TapButton3" "3"
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
[ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
The /var/log/Xorg.0.log when using nv:
[ 52.162]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 52.163] X Protocol Version 11, Revision 0
[ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 52.165] Build Date: 30 May 2012 07:24:13PM
[ 52.165]
[ 52.165] Current version of pixman: 0.26.0
[ 52.166] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
[ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
[ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 52.168] (==) No Layout section. Using the first Screen section.
[ 52.168] (==) No screen section available. Using defaults.
[ 52.168] (**) |-->Screen "Default Screen Section" (0)
[ 52.168] (**) | |-->Monitor "<default monitor>"
[ 52.168] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 52.168] (**) | |-->Device "Device0"
[ 52.168] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 52.169] (==) Automatically adding devices
[ 52.169] (==) Automatically enabling devices
[ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 52.169] Entry deleted from font path.
[ 52.169] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 52.169] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 52.169] (II) Loader magic: 0x7c58e0
[ 52.169] (II) Module ABI versions:
[ 52.169] X.Org ANSI C Emulation: 0.4
[ 52.169] X.Org Video Driver: 12.0
[ 52.169] X.Org XInput driver : 16.0
[ 52.169] X.Org Server Extension : 6.0
[ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
[ 52.170] (II) LoadModule: "extmod"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 52.170] (II) Module extmod: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension MIT-SCREEN-SAVER
[ 52.170] (II) Loading extension XFree86-VidModeExtension
[ 52.170] (II) Loading extension XFree86-DGA
[ 52.170] (II) Loading extension DPMS
[ 52.170] (II) Loading extension XVideo
[ 52.170] (II) Loading extension XVideo-MotionCompensation
[ 52.170] (II) Loading extension X-Resource
[ 52.170] (II) LoadModule: "dbe"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 52.170] (II) Module dbe: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension DOUBLE-BUFFER
[ 52.170] (II) LoadModule: "glx"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
[ 52.180] compiled for 4.0.2, module version = 1.0.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 52.180] (II) Loading extension GLX
[ 52.180] (II) LoadModule: "record"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 52.180] (II) Module record: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.13.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension RECORD
[ 52.180] (II) LoadModule: "dri"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 52.180] (II) Module dri: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.0.0
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension XFree86-DRI
[ 52.180] (II) LoadModule: "dri2"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 52.181] (II) Module dri2: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.2, module version = 1.2.0
[ 52.181] ABI class: X.Org Server Extension, version 6.0
[ 52.181] (II) Loading extension DRI2
[ 52.181] (II) LoadModule: "nv"
[ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 52.181] (II) Module nv: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.0.901, module version = 2.1.18
[ 52.181] Module class: X.Org Video Driver
[ 52.181] ABI class: X.Org Video Driver, version 12.0
[ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 52.183] (--) using VT number 7
[ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
[ 52.211] (II) Loading sub module "int10"
[ 52.211] (II) LoadModule: "int10"
[ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 52.233] (II) Module int10: vendor="X.Org Foundation"
[ 52.233] compiled for 1.12.2, module version = 1.0.0
[ 52.233] ABI class: X.Org Video Driver, version 12.0
[ 52.233] (II) NV(0): Initializing int10
[ 52.234] (II) NV(0): Bad V_BIOS checksum
[ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
[ 52.234] (--) NV(0): Console is VGA mode 0x105
[ 52.234] (II) NV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
[ 52.234] (==) NV(0): RGB weight 888
[ 52.234] (==) NV(0): Default visual is TrueColor
[ 52.235] (==) NV(0): Using hardware cursor
[ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
[ 52.245] (--) NV(0): Total video RAM: 512.0 MB
[ 52.245] (--) NV(0): BAR1 size: 256.0 MB
[ 52.245] (--) NV(0): Mapped memory: 256.0 MB
[ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
[ 52.317] (II) Loading sub module "i2c"
[ 52.317] (II) LoadModule: "i2c"
[ 52.317] (II) Module "i2c" already built-in
[ 52.317] (II) Loading sub module "ddc"
[ 52.317] (II) LoadModule: "ddc"
[ 52.317] (II) Module "ddc" already built-in
[ 52.317] (--) NV(0): Connector map:
[ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
[ 52.317] (--) NV(0): Bus 0 -> DAC1
[ 52.317] (--) NV(0): Bus 8 -> SOR3
[ 52.317] (--) NV(0): Load detection: 340
[ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
[ 52.317] (II) NV(0): Output VGA1 has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
[ 52.317] (II) NV(0): Output DVI3 has no monitor section
[ 52.317] (II) NV(0): LVDS native size 1366x768
[ 52.317] (II) NV(0): Output LVDS has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
[ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
[ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
[ 52.321] (II) NV(0): ... none found
[ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
[ 52.366] (II) NV(0): EDID for output VGA1
[ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
[ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
[ 52.370] (II) NV(0): ... none found
[ 52.370] (II) NV(0): EDID for output DVI3
[ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
[ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
[ 52.422] (--) NV(0): DDC detected a DFP:
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID for output LVDS
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
[ 52.422] (II) NV(0): Printing probed modes for output LVDS
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (II) NV(0): Output VGA1 disconnected
[ 52.422] (II) NV(0): Output DVI3 disconnected
[ 52.422] (II) NV(0): Output LVDS connected
[ 52.422] (II) NV(0): Using exact sizes for initial modes
[ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
[ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
[ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (==) NV(0): DPI set to (96, 96)
[ 52.422] (II) Loading sub module "fb"
[ 52.422] (II) LoadModule: "fb"
[ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 52.447] (II) Module fb: vendor="X.Org Foundation"
[ 52.447] compiled for 1.12.2, module version = 1.0.0
[ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
[ 52.447] (II) Loading sub module "xaa"
[ 52.447] (II) LoadModule: "xaa"
[ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 52.458] (II) Module xaa: vendor="X.Org Foundation"
[ 52.458] compiled for 1.12.2, module version = 1.2.1
[ 52.458] ABI class: X.Org Video Driver, version 12.0
[ 52.458] (II) Loading sub module "ramdac"
[ 52.458] (II) LoadModule: "ramdac"
[ 52.458] (II) Module "ramdac" already built-in
[ 52.458] (--) Depth 24 pixmap format is 32 bpp
[ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
[ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
[ 52.507] Screen to screen bit blits
[ 52.507] Solid filled rectangles
[ 52.507] 8x8 mono pattern filled rectangles
[ 52.507] Indirect CPU to Screen color expansion
[ 52.507] Solid Lines
[ 52.507] Scanline Image Writes
[ 52.508] Setting up tile and stipple cache:
[ 52.508] 32 128x128 slots
[ 52.508] 32 256x256 slots
[ 52.508] 16 512x512 slots
[ 52.508] (==) NV(0): Backing store disabled
[ 52.508] (==) NV(0): Silken mouse enabled
[ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 52.508] (==) NV(0): DPMS enabled
[ 55.081] (--) RandR disabled
[ 55.081] (II) Initializing built-in extension Generic Event Extension
[ 55.081] (II) Initializing built-in extension SHAPE
[ 55.081] (II) Initializing built-in extension MIT-SHM
[ 55.081] (II) Initializing built-in extension XInputExtension
[ 55.081] (II) Initializing built-in extension XTEST
[ 55.081] (II) Initializing built-in extension BIG-REQUESTS
[ 55.081] (II) Initializing built-in extension SYNC
[ 55.081] (II) Initializing built-in extension XKEYBOARD
[ 55.081] (II) Initializing built-in extension XC-MISC
[ 55.081] (II) Initializing built-in extension SECURITY
[ 55.081] (II) Initializing built-in extension XINERAMA
[ 55.081] (II) Initializing built-in extension XFIXES
[ 55.081] (II) Initializing built-in extension RENDER
[ 55.081] (II) Initializing built-in extension RANDR
[ 55.081] (II) Initializing built-in extension COMPOSITE
[ 55.081] (II) Initializing built-in extension DAMAGE
[ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
[ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.715] (II) LoadModule: "evdev"
[ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 55.725] (II) Module evdev: vendor="X.Org Foundation"
[ 55.725] compiled for 1.12.0, module version = 2.7.0
[ 55.725] Module class: X.Org XInput Driver
[ 55.725] ABI class: X.Org XInput driver, version 16.0
[ 55.725] (II) Using input driver 'evdev' for 'Power Button'
[ 55.725] (**) Power Button: always reports core events
[ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.725] (--) evdev: Power Button: Found keys
[ 55.725] (II) evdev: Power Button: Configuring as keyboard
[ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 55.725] (**) Option "xkb_rules" "evdev"
[ 55.725] (**) Option "xkb_model" "evdev"
[ 55.725] (**) Option "xkb_layout" "se"
[ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
[ 55.918] (**) Video Bus: always reports core events
[ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 55.918] (--) evdev: Video Bus: Found keys
[ 55.918] (II) evdev: Video Bus: Configuring as keyboard
[ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 55.918] (**) Option "xkb_rules" "evdev"
[ 55.918] (**) Option "xkb_model" "evdev"
[ 55.918] (**) Option "xkb_layout" "se"
[ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.919] (II) Using input driver 'evdev' for 'Power Button'
[ 55.919] (**) Power Button: always reports core events
[ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.919] (--) evdev: Power Button: Found keys
[ 55.919] (II) evdev: Power Button: Configuring as keyboard
[ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 55.919] (**) Option "xkb_rules" "evdev"
[ 55.919] (**) Option "xkb_model" "evdev"
[ 55.919] (**) Option "xkb_layout" "se"
[ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 55.920] (II) No input driver specified, ignoring this device.
[ 55.920] (II) This device may have been added with another device file.
[ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
[ 55.921] (**) Sleep Button: always reports core events
[ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 55.921] (--) evdev: Sleep Button: Found keys
[ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
[ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 55.921] (**) Option "xkb_rules" "evdev"
[ 55.921] (**) Option "xkb_model" "evdev"
[ 55.921] (**) Option "xkb_layout" "se"
[ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 55.922] (II) No input driver specified, ignoring this device.
[ 55.922] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 55.924] (II) No input driver specified, ignoring this device.
[ 55.924] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.924] (**) Logitech USB Receiver: always reports core events
[ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 55.926] (II) No input driver specified, ignoring this device.
[ 55.926] (II) This device may have been added with another device file.
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.927] (**) Logitech USB Receiver: always reports core events
[ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found keys
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 55.927] (**) USB 2.0 PC Camera: always reports core events
[ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
[ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
[ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 55.929] (**) Option "xkb_rules" "evdev"
[ 55.929] (**) Option "xkb_model" "evdev"
[ 55.929] (**) Option "xkb_layout" "se"
[ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 55.929] (II) LoadModule: "synaptics"
[ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
[ 55.967] compiled for 1.12.1, module version = 1.6.1
[ 55.967] Module class: X.Org XInput Driver
[ 55.967] ABI class: X.Org XInput driver, version 16.0
[ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.967] (**) Option "Device" "/dev/input/event9"
[ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 55.968] (**) Option "TapButton1" "1"
[ 55.968] (**) Option "TapButton2" "2"
[ 55.968] (**) Option "TapButton3" "3"
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 55.969] (II) No input driver specified, ignoring this device.
[ 55.969] (II) This device may have been added with another device file.
[ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 55.970] (II) No input driver specified, ignoring this device.
[ 55.970] (II) This device may have been added with another device file.
From what I can tell it is something with the nvidia driver that doesn't play well with xorg. Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
Last edited by Larsson (2012-06-13 18:59:43)Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or NV-GLX that slows it down. Any suggestions on how I can speed this up?
ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM. But I don't think this is the problem?
Maybe you are looking for
-
I Have a Mac 10.9.5 I have Photoshop CS 5.. Also have Photoshop CC. As of last month was able to edit any image with either program,as of today I can't edit images in either program. I can't see and editing I've done ,but when close the image both pr
-
Color in formatted_text_view element
Hi all, For any tag in formatted_text_view, can we have different color? for example if we have three line text in this element, can those all have different color? Thanks
-
FCP6 and QT 7.6.4 crash on video import
Time after time, FCP and QT have crashed after importing videos. If the videos have been exported previously, then they work fine in FCP 6 and QT 7.6.4 The are .AVI and .MOV files. One file was a .MOV file that was converted from .MTS on another mac.
-
Hi all, I am using Oracle 10gR2 on Solaris 10. The application using my DB does a lot of commits and rollbacks, because of which my undo tablespace is always full. I have a RAC with two nodes, so two undo tablespaces, which are always full. Now, when
-
Need a Palm Pre alarm clock solution
I want to use my Palm Pre as an alarm clock. I have the Pandora app downloaded and saw an app in the AppCatalog called 'Wake to Music' that integrates with Pandora (Why doesn't the built in alarm?). If I buy blue tooth speakers (any recommendations