[SOLVED]OIM: Attestation Email notification isn't working :(

Hi.
I'm using OIM9031@JBOSS.
I've created a new attestation with 'Users by manager' scope, selected 'Reviewer is each user's manager' option, set 'Notify process owner if reviewer declines' check box.
I've verified, that process owner (XELSYSADM) has a valid email adress and all predefined email templates are ok.
I've created a IT Resource 'Email Server' of type Mail Server.
But notifications don't even launched (according to logs). What am I doing wrong?

Has the actual attestation event triggered? The scheduled task "Initiate Attestation Processes" must run before any attestation events get sent out, even when you click the run once.
Looking at the documentation, can you verify this stuff?
System Control
Attestation has the following dependencies:
The User Profile Audit feature must be enabled.
Historical data must be collected at least up to the Process Form level.
If the auditing level is set below the required levels, then clicking menu item links related to attestation generates the Attestation Feature Not Available page, and prevents the user from defining any attestation processes.
Audit levels are controlled by the system property called XL.UserProfileAuditDataCollection and the attestation feature expects this value to be set to at least Resource Form.
-Kevin

Similar Messages

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Email notifications no longer work in iOS 7

Since I downloaded the ios 7 to my iphone 4, my email notifications no longer work. I have to actually go to my mail and refresh the page in order to get my email. My emails never come through right away anymore. I have gone to settings and made sure the alerts are turned on, and they are, but I still get no alert as to when an email comes in at that moment.
Can anyone tell me what is going on? What can I do to solve this problem? I am tired to having always refresh the mail in order to get my emails.

I am having a similar issue. I have an iPhone 5, and after updating to iOS 8 it uses the ringtone I have set as my default.. but will not keep the ringtones I have set for one person. I go back in and change it, and five minutes later it's back to the default ringtone. And it keeps doing this.
Help?

Don't know what happened to my iPhone 4 screen is completely black but can still hear when I get email notifications, Siri still works, and can hear music?

IPhone 4 screen is completely black
can still hear when I get email notifications
Siri still works and can hear my music
what could have gone wrong?

try to make a hard reset (home button +power button for 15seconds) then restore by itunes.this is called DFU mode,once you done,can only restore the device by itunes!let me know if it works

OIM 11g - Email Notifications configured in human task is not working

Hi,
My requirement is to send email to the assignee whenever a request is assigned to the user. I created a custom bpel workflow and configured email notiifcation in the human task for the status 'assign'. I have configured Email driver with following properties:
Sender Addresses = <[email protected]>
Default Sender Address = <[email protected]>
Outgoing Mail Server = <Exchange server host>
Outgoing Mail Server Port = 25
Outgoing Mail Server Security = none
Outgoing Default From Addr = <[email protected]>
I have also set the Notification Mode to 'Email' in Workflow Notification Properties.
However when a request is assigned to the user, email notifications are not sent.
I do not see any errors in the logs. In Enterprise Manager console I navigated to SOA Infrastructure Home > Human Workflow Engine > Notification Management and I could see outgoing email notifications corresponding to the workflow instance with the status showing 'Sent'.
Also the Exchange server that is being used has already been tested for provisioning emails from OIM and it works fine for provisioning.
Any pointers/troubleshooting tip to resolve this issue is greatly appreciated.
Regards
Deepa

Hi,
My requirement is to send email to the assignee whenever a request is assigned to the user. I created a custom bpel workflow and configured email notiifcation in the human task for the status 'assign'. I have configured Email driver with following properties:
Sender Addresses = <[email protected]>
Default Sender Address = <[email protected]>
Outgoing Mail Server = <Exchange server host>
Outgoing Mail Server Port = 25
Outgoing Mail Server Security = none
Outgoing Default From Addr = <[email protected]>
I have also set the Notification Mode to 'Email' in Workflow Notification Properties.
However when a request is assigned to the user, email notifications are not sent.
I do not see any errors in the logs. In Enterprise Manager console I navigated to SOA Infrastructure Home > Human Workflow Engine > Notification Management and I could see outgoing email notifications corresponding to the workflow instance with the status showing 'Sent'.
Also the Exchange server that is being used has already been tested for provisioning emails from OIM and it works fine for provisioning.
Any pointers/troubleshooting tip to resolve this issue is greatly appreciated.
Regards
Deepa

OIM 11g - email notification

Dear All,
I need to create quick POC that will involve provisioning to multiple resources during OIM profile creation. One consolidated e-mail notification should be sent as a result.
1. I never used simulated/fake/manual resource. If you used it in the past maybe you can guide me through as for how to create it?
2. How to make sure that centralized e-mail is sent at the end (all resources are provisioned)?
I was planning to create default role or use ALL USERS role that will be attached to access policies for different resources. When HR record comes, OIM user profile is created and default role (ALL USERS, for example) is assigned.
This role will trigger execution of access policies that will create accounts on the target platforms.
My challenges are:
1) ONE consolidated email notification upon SUCCESSFUL completion (default event that somehow should be triggered maybe by job?, custom task that sets the flag in custom table upon successful completion? or maybe I overengineering .....)
2) send user to manual queue if creation of the user account on any of the target resources fail.
If you can provide any guidance as for how this could be done I would appreciate it very much
Thank you for your time

1. The process is outlined here: http://iamreflections.blogspot.com/2010/08/oim-howto-leverage-standard-connector.html
2. There are two parts to this question.
The first part is to figure out the triggering event. If you know what resource will be last provisioned you can simply put a task that is fired on completion of the final provisioning task that then checks the result of all other resources using the APIs. If you don't know which resource will be last you could let the final provisioning task in each resource have a follow up task that sets a variable on the user form, then have another folllow up task that checks if all values are set and if so do the appropriate thing (if not just exit)
Traditionally you would assign a task to the sysadmin using the API if you wanted a manual intervention (http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcProvisioningOperationsIntf.html#reassignTasksToUser(long[], long)) but there is the new concept of queues that I actually haven't worked with (http://otndnld.oracle.co.jp/document/products/id_mgmt/idm_904/doc_cd/javadocs/operations/Thor/API/Operations/tcQueueOperationsIntf.html) that may be what you are looking for.
Email sending tends to be easier using Javamail than trying to leverage the email framework once you want something that isn't very basic.
Hope this helps
/Martin

Email notification doesn't work in a specific tablespace.

Hello,
I have a Oracle 10gR2 Version: 10.2.0.5.0. I'm having problems to receive emails notifications in a specific tablespace. I created a Rule Notification for "Tablespace Space Used (%)". I know the rule and metrics are ok. How?
1) At another tablespace, I create a specific Threshold for Tablespace Space Used (%) and I set the Warning Threshold to 1%, and Critical Threshold to 2%. After some minutes, I receive an email with the Critical message because the tablespace have a 60% of space used. I do the same test with the other tablespace and no email received.
2) I have two servers with the same database (only data changes) and in one server its works , not in the other server.
This is the information for the "bad" tablespace:
Name
BAD_TABLESPACE
Bigfile tablespace
No
Status
ReadWrite
Type
Permanent
Extent Management
local
Storage
Allocation Type
Automatic
Segment Space Management
Automatic
Enable logging
Yes
Block Size (B)
8192
It have 45 .dbf datafiles. Almost all of them are 100% full (32GB max)
Locally Managed, Permanent, Read Write mode. an Logging enabled.
Any ideas? suggestions or miracles?
Thanks!

Then it should do the same in all tablespaces isn't it? Like sb92075 said: "different results occur when something is different.". The only thing different between the tablespaces is the process running on it. I have some process running in my "bad_tablespace" that it load a big amount of data. I detected when I stop all the process, I start again to receive the emails. I can't find information about that.
Could be possible the high data load of a tablespace might affect to notification emails?

OIM 11g - Email Notification with direct link to Approval Task Details

Hi,
We wanted to send email notifications to approver with direct link to the approval task details screen from which the user can either approve or reject the request. In OIM 11g OOTB Notification templates such as Request Creation contains the direct link to Request Detail screen which is something like
http://localhost:14000/oim/faces/pages/Self.jspx?OP_TYPE=LOOKUP;E_TYPE=MY_REQUEST&T_ID=65
Wondering if there is something similar for Approval Task Details screen as well.
Any kind of help or suggestion is greatly appreciated.
Thanks,
Deepa

If at all you cannot get the direct link for approve/reject then try the actionable email from SOA. Once you have that configured the emails gets approver/reject links so that approvers can directly approve/reject the task from email. If that works for you then you can look at the format of those links in the email and deduce what you need the url as.
HTH,
BB

Email notifications are not working anymore

Hi guys,
I use Grid Control 10.2.0.2 on Windows, and email notifications for critical alerts are not working anymore.
I didn't change anything to the OMS configuration, it just stopped one day, and when I ask for a test email (in "Setup -> Notifications methods" of in "Preferences") it is successfully delivered.
I didn't find anything related to this in log files, and nothing that could help here or on metalink.
Can anyone help about that weird issue ??
thanks in advance
Antoine

Have you gone back over your notification rules?
have you tried just creating a new notification rule and testing it?
Also take a look at Note:356774.1. If you've applied any patches (or done partition maintenance) you may have inadvertently lost all your jobs, which will break the email notications.
If still no joy, then try Note:285093.1.
let us know how you get on.

Email notification mail not working in case of customer repository

Hi Experts,
We have the system MDM 7.1 SP06, we are not able to get the email notification for customer repository. For other repositories like material & vendor mails are working fine. I Have checked the following steps.
1) Added notification step to the workflow between processes.
2) Verified the email addresses of the workflow owner and the receiver of the notification.
3) Verified that the mds.ini has the "MailServer=" setup to the right smtp.
I have check in workflow history, it is showing notify step but not showing details of mail like send to, mail body. While in case of material repository, it was showing complete details like send to, mail body & all.
Previously mails for customers were working fine. Kindly suggest the solution.
Regards,
Gaurang

Hi Gaurang,
Are the time parameter same for all the repositories?
Create a dummy user and dummy workflow,and try to send mail from that workflow.
If this works with some id then check with the Admin id which you are using.
This way you can eliminate the possibility of id not working.Also it will tell you that user is corrupt or not.
Check for log and traces,kindly provide with the post here.
Thanks,
Ravi

Email notification doesn't work

Hi,
I was interested in monitoring a Forum thread.
I added the Thread to my Watch list, but also wanted to get an email for each update.
I clicked link "Add Email Notification", but I don't get any email notification when it's updated.
Thanks in advance,
Didier.

It seems to work now: I got emails for last updates.
Regards,
Didier.

Email notification center not working on iPhone5

My email notification center on the new iPhone5 does not appear to be responding to changes that I make.
For example. Whenever I'm at the office, I don't need my phone to notify me of every email that comes in. So I go into NOTIFICATIONS, EMAIL, and I turn "notification center" off. I also switch the alert style to NONE. However, I still see my phone light up whenever a new email comes through and the alert shows on the middle of the screen.
I've discovered that if I power cycle the phone, SOMETIMES, the setting will take.
I've gone from Blackberry to Android, and now to iPhone. The one feature that the BB did have which I loved was that you could very easily set all of your ringtones, alerts, etc... based upon a predifined notificatios app. for instance, If I chose 'Office", my phone would be set to vibrate for incoming calls and text messages, but nothing else. If picked "Home" it would ring for everything (phone calls, text messages, email, FaceBook, etc...). If I picked "Sleeping" it would would ring Only incoming calls and text messages.
I see that iPhone has attempted to do this with the DO NOT DISTURB option. I can quickly turn everything off with the exception of incoming calls. It would be nice if this option was more advanced and allowed me to set how I want each of my notifications to work, depending on which setting i picked.
I'm curiose as to whether or not any apps exist to allow this functionality. I have not been able to find one.

Well, I have a plain question for EVERYONE here:
Do you see the same Notification Center on the Lock Screen as in the Home Screen?
Do you? Anyone?
Apple: make sure you work on this stuff really fast, it's very anoing what you are doing here. I need the NotificationCenter on the LockScreen, with the Favorites contacts there too. Just learn from the jailbreak software, NOW !
I bet it's not a mistake, it's just the way Apple think it's better for me. They are so smart they know what's better for me all the time. Just plain WRONG !!!

Suppress OIM OOTB email notification

When a user is created through OIM admin console, an OOTB email notification is sent to the user's manager.
The email details are as follows:
"Subject: Congratulations - New Account has been created
Body: Congratulations!! Your account has been successfully created!! Your user login is - xxxxxxxx "
There is another mail going out as well to the user.
The email details are:
"Subject: New Account Information
Body: An account has been created for you with the following details. You will be required to change your password on next login.
UserID: xxxxx
Password: xxxxx
For any issues, please contact [admin email or phone] "
Is anyone aware if we can suppress these out of the box email notifications?
Edited by: 910571 on Jan 26, 2012 11:18 PM

Hi,
I believe you can suppress OOTB email notification with help of implementing oracle.iam.platform.kernel.spi.PostProcessHandler and oracle.iam.notification.impl.NotificationEventResolver. Also you need one email template created in OIM.
I had implemented for one of my client to send email notification having some attributes with same solution.
Thanks,
Pradeep.
Edited by: Pradeep Khopade on Jan 27, 2012 1:38 AM

Dac email notification is not working

Hi There,
I am using DAC 10g.
I have two environment TEST and DEV.
I have set email notification in both the environment and as email has to go on different different servers, I have not not set the smtp server.
Test environment the email notification is working fine but not in DEV.
Could you plz tell me where I am going wrong? Plz share some document or link for the same.
Any help will be appreciated!!
Thanks,
Pushpesh Pallav

Check this and follow the same steps with valid info
Bookshelf v7.8.3: Configuring Email in the DAC Server (Optional)
if helps mark
~ http://cool-bi.com

Email form isn't working

Please take a look at my form and help me identify why it
isn't working. I am new at this. The form is hosted on Godaddy
server.
http://www.mostlykidsinc.com/test/contact.htm

> Please take a look at my form and help me identify why
it isn't working. I
> am new at this. The form is hosted on Godaddy server.
>
http://www.mostlykidsinc.com/test/contact.htm
You should be addressing this to Godaddy really. Have you
checked their FAQ
pages? or in your control panel - you may find some help
notes about the
script and the correct way to use it....
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au

[SOLVED]OIM: Attestation Email notification isn't working :(

Similar Messages

Maybe you are looking for