[solved] Only gibberish after boot on my netbook

Hi all,
I've installed Arch on my netbook (Acer Aspire ES1-11M-C56A) and everything went pretty smoothly until the first boot.
Here is some images of my boot sequence in chronological order:
https://www.dropbox.com/s/z2pgif6pr1327 … 8.jpg?dl=0
https://www.dropbox.com/s/l7lo3f9qymgoa … 4.jpg?dl=0
https://www.dropbox.com/s/eyk6ws374ytz0 … 5.jpg?dl=0
https://www.dropbox.com/s/y5j93qjfts4zf … 1.jpg?dl=0
The last one is the problematic one: It's only gibberish... When I press keys, I do see something happening, I just cant read anything...
Two things I've already tried:
Before I installed Arch onto the netbook, I ran Arch from my USB Stick and it worked fine.
Secondly, since it ran finde from the stick, I checked the kernel boot line via dmesg | grep command after booting from the stick but it looks pretty much the same as the one in GRUB when booting from the netbook itself. It has the options rw and quite. I already tested inserting nomodeset in there, but that didn't help...
Any help highly appriciated.... :-/
Fabian
Last edited by Dunkit (2015-05-01 10:01:34)

Sorry, I already posted my last answer before I read your post...
I do have an intel video chip ( it's onboard I suppose, lspci says 'VGA compatible Controller: Intel Corporation Atom PRocessor Z36xxx/Z37xxx Series Graphics & Display) and I installed the xf86-video-intel  for that.
dmesg only shows some errors that seem to be related to the fact that I'm using eMMc storage:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000781aefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000781af000-0x00000000787aefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000787af000-0x00000000788aefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000788af000-0x00000000788eefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000788ef000-0x00000000794c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000794c6000-0x0000000079dc5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079dc6000-0x0000000079ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire ES1-111M/R2, BIOS V1.03 07/22/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 3 base 07B000000 mask FFF000000 uncachable
[ 0.000000] 4 base 07AE00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79e00000-0x79ffffff]
[ 0.000000] [mem 0x79e00000-0x79ffffff] page 2M
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x78000000-0x781aefff]
[ 0.000000] [mem 0x78000000-0x781aefff] page 4k
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x788ef000-0x794c5fff]
[ 0.000000] [mem 0x788ef000-0x789fffff] page 4k
[ 0.000000] [mem 0x78a00000-0x793fffff] page 2M
[ 0.000000] [mem 0x79400000-0x794c5fff] page 4k
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x79dc6000-0x79dfffff]
[ 0.000000] [mem 0x79dc6000-0x79dfffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
[ 0.000000] [mem 0x1f100000-0x1f1fffff] page 4k
[ 0.000000] [mem 0x1f200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
[ 0.000000] [mem 0x20100000-0x201fffff] page 4k
[ 0.000000] [mem 0x20200000-0x77ffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x379c2000-0x37cd8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000788EE120 0000AC (v01 ACRSYS ACRPRDCT 00000003 01000013)
[ 0.000000] ACPI: FACP 0x00000000788EB000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: DSDT 0x00000000788DD000 008EEF (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: FACS 0x0000000078878000 000040
[ 0.000000] ACPI: UEFI 0x00000000788ED000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x00000000788EC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x00000000788EA000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: LPIT 0x00000000788E9000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: APIC 0x00000000788E8000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: MCFG 0x00000000788E7000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788E6000 000581 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788DB000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788DA000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D9000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D8000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: UEFI 0x00000000788D7000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D3000 00305B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: CSRT 0x00000000788D2000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
[ 0.000000] ACPI: SSDT 0x00000000788D1000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: FPDT 0x00000000788D0000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff]
[ 0.000000] NODE_DATA [mem 0x79ff8000-0x79ffbfff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076000000-ffff880077ffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1effffff]
[ 0.000000] node 0: [mem 0x1f100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20100000-0x781aefff]
[ 0.000000] node 0: [mem 0x788ef000-0x794c5fff]
[ 0.000000] node 0: [mem 0x79dc6000-0x79ffffff]
[ 0.000000] On node 0 totalpages: 494941
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7744 pages used for memmap
[ 0.000000] DMA32 zone: 490944 pages, LIFO batch:31
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x781af000-0x787aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x787af000-0x788aefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x788af000-0x788eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x794c6000-0x79dc5fff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880079200000 s86848 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 487112
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1931524K/1979764K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 48240K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x1a
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 2163200 KHz
[ 0.000000] lapic_timer_frequency = 277333
[ 0.000000] tsc: Detected 2163.200 MHz processor
[ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4328.66 BogoMIPS (lpj=7210666)
[ 0.000045] pid_max: default: 32768 minimum: 301
[ 0.000061] ACPI: Core revision 20140724
[ 0.020950] ACPI: All ACPI Tables successfully acquired
[ 0.037502] Security Framework initialized
[ 0.037510] Yama: becoming mindful.
[ 0.037738] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.038621] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.039038] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.039048] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.039370] Initializing cgroup subsys memory
[ 0.039383] Initializing cgroup subsys devices
[ 0.039390] Initializing cgroup subsys freezer
[ 0.039395] Initializing cgroup subsys net_cls
[ 0.039400] Initializing cgroup subsys blkio
[ 0.039426] CPU: Physical Processor ID: 0
[ 0.039429] CPU: Processor Core ID: 0
[ 0.039435] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.044212] mce: CPU supports 6 MCE banks
[ 0.044222] CPU0: Thermal monitoring handled by SMI
[ 0.044231] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.044350] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.045336] ftrace: allocating 20675 entries in 81 pages
[ 0.056669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.089653] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
[ 0.089679] TSC deadline timer enabled
[ 0.089713] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.089728] ... version: 3
[ 0.089730] ... bit width: 40
[ 0.089732] ... generic registers: 2
[ 0.089734] ... value mask: 000000ffffffffff
[ 0.089737] ... max period: 000000ffffffffff
[ 0.089738] ... fixed-purpose events: 3
[ 0.089740] ... event mask: 0000000700000003
[ 0.109818] x86: Booting SMP configuration:
[ 0.109824] .... node #0, CPUs: #1
[ 0.125602] CPU1: Thermal monitoring handled by SMI
[ 0.127775] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.127798] x86: Booted up 1 node, 2 CPUs
[ 0.127802] smpboot: Total of 2 processors activated (8656.33 BogoMIPS)
[ 0.128380] devtmpfs: initialized
[ 0.134353] PM: Registering ACPI NVS region [mem 0x787af000-0x788aefff] (1048576 bytes)
[ 0.134382] PM: Registering ACPI NVS region [mem 0x794c6000-0x79dc5fff] (9437184 bytes)
[ 0.136401] pinctrl core: initialized pinctrl subsystem
[ 0.136470] RTC time: 20:38:52, date: 11/14/14
[ 0.136681] NET: Registered protocol family 16
[ 0.136908] cpuidle: using governor ladder
[ 0.136913] cpuidle: using governor menu
[ 0.136962] ACPI: bus type PCI registered
[ 0.136966] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.137094] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.137099] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.137280] PCI: Using configuration type 1 for base access
[ 0.148365] ACPI: Added _OSI(Module Device)
[ 0.148371] ACPI: Added _OSI(Processor Device)
[ 0.148373] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.148376] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.182017] ACPI: Dynamic OEM Table Load:
[ 0.182033] ACPI: SSDT 0xFFFF88007566F000 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.182998] ACPI: Dynamic OEM Table Load:
[ 0.183012] ACPI: SSDT 0xFFFF88007566F800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.191456] ACPI: Dynamic OEM Table Load:
[ 0.191469] ACPI: SSDT 0xFFFF88007523E600 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.201158] ACPI: Dynamic OEM Table Load:
[ 0.201171] ACPI: SSDT 0xFFFF880075065D80 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.221110] ACPI: Interpreter enabled
[ 0.221122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.221131] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.221159] ACPI: (supports S0 S3 S4 S5)
[ 0.221162] ACPI: Using IOAPIC for interrupt routing
[ 0.221223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.224878] ACPI: Power Resource [USBC] (on)
[ 0.235979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.235991] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.236183] \_SB_.PCI0:_OSC invalid UUID
[ 0.236186] _OSC request data:1 1f 0
[ 0.236194] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.236642] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.236942] PCI host bridge to bus 0000:00
[ 0.236949] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.236953] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.236957] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.236960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.236964] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.236968] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.236971] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.236975] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
[ 0.236987] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.237145] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.237161] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.237174] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.237185] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
[ 0.237352] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
[ 0.237372] pci 0000:00:12.0: reg 0x10: [mem 0x90920000-0x90920fff]
[ 0.237384] pci 0000:00:12.0: reg 0x14: [mem 0x9091f000-0x9091ffff]
[ 0.237451] pci 0000:00:12.0: PME# supported from D0 D3hot
[ 0.237582] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.237604] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
[ 0.237664] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.237767] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.237842] pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
[ 0.237862] pci 0000:00:17.0: reg 0x10: [mem 0x9091d000-0x9091dfff]
[ 0.237874] pci 0000:00:17.0: reg 0x14: [mem 0x9091c000-0x9091cfff]
[ 0.237941] pci 0000:00:17.0: PME# supported from D0 D3hot
[ 0.238080] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.238109] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
[ 0.238125] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
[ 0.238234] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.238369] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[ 0.238395] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
[ 0.238467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.238595] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[ 0.238661] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.238730] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.238805] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[ 0.238869] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.238938] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.239009] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[ 0.239073] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.239142] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.239220] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.239413] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[ 0.239450] pci 0000:00:1f.3: reg 0x10: [mem 0x90918000-0x9091801f]
[ 0.239523] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
[ 0.239806] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.239939] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[ 0.239969] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90607fff 64bit]
[ 0.240106] pci 0000:02:00.0: supports D1 D2
[ 0.240109] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.240155] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.244425] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.244433] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.244537] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.244559] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.244589] pci 0000:03:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
[ 0.244609] pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
[ 0.244701] pci 0000:03:00.0: supports D1 D2
[ 0.244704] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.244753] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.251067] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.251073] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.251079] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.251085] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.251926] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.252051] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.252168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.252284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.252400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.252515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.252630] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.252746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.255427] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.255679] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.255890] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.255894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.255900] vgaarb: loaded
[ 0.255902] vgaarb: bridge control possible 0000:00:02.0
[ 0.255981] PCI: Using ACPI for IRQ routing
[ 0.257377] PCI: pci_cache_line_size set to 64 bytes
[ 0.257448] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.257451] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
[ 0.257454] e820: reserve RAM buffer [mem 0x781af000-0x7bffffff]
[ 0.257457] e820: reserve RAM buffer [mem 0x794c6000-0x7bffffff]
[ 0.257460] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[ 0.257646] NetLabel: Initializing
[ 0.257649] NetLabel: domain hash size = 128
[ 0.257651] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.257674] NetLabel: unlabeled traffic allowed by default
[ 0.257740] Switched to clocksource refined-jiffies
[ 0.266257] pnp: PnP ACPI init
[ 0.266368] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.266512] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.266518] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.266522] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.266526] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.266531] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.266537] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266663] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.267177] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.267183] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.267187] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.267191] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.267196] system 00:03: [mem 0xfed0c000-0xfed0ffff] could not be reserved
[ 0.267200] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.267204] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.267208] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.267213] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.267218] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268674] pnp: PnP ACPI: found 4 devices
[ 0.277065] Switched to clocksource acpi_pm
[ 0.277091] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.277097] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.277102] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.277111] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.277116] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.277135] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.277139] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.277144] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.277148] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.277151] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.277162] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 0.277166] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.277176] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277180] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277189] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277193] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277200] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.277205] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.277217] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277221] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277227] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[ 0.277231] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[ 0.277240] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[ 0.277244] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[ 0.277248] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.277252] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.277264] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.277268] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.277274] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
[ 0.277283] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.277287] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.277293] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
[ 0.277298] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 0.277306] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.277309] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.277313] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.277316] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.277320] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.277323] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.277327] pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
[ 0.277331] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.277335] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.277338] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
[ 0.277342] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.277345] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
[ 0.277349] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[ 0.277394] NET: Registered protocol family 2
[ 0.277708] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.277807] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.277882] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.277930] TCP: reno registered
[ 0.277940] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.277962] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.278050] NET: Registered protocol family 1
[ 0.278077] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.278420] PCI: CLS 64 bytes, default 64
[ 0.278507] Unpacking initramfs...
[ 0.363030] Freeing initrd memory: 3164K (ffff8800379c2000 - ffff880037cd9000)
[ 0.363325] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x824
[ 0.363342] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x824
[ 0.363454] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.363501] Scanning for low memory corruption every 60 seconds
[ 0.364076] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.364106] Initialise system trusted keyring
[ 0.364623] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.367286] zpool: loaded
[ 0.367291] zbud: loaded
[ 0.367570] VFS: Disk quotas dquot_6.5.2
[ 0.367637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.367884] msgmni has been set to 3778
[ 0.367982] Key type big_key registered
[ 0.368394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.368491] io scheduler noop registered
[ 0.368496] io scheduler deadline registered
[ 0.368553] io scheduler cfq registered (default)
[ 0.369157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.369189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.369267] efifb: probing for efifb
[ 0.369275] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
[ 0.369278] efifb: mode is 640x480x1, linelength=80, pages=1
[ 0.369280] efifb: scrolling: redraw
[ 0.369283] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.371834] Console: switching to colour frame buffer device 80x30
[ 0.374216] fb0: EFI VGA frame buffer device
[ 0.374232] intel_idle: MWAIT substates: 0x33000020
[ 0.374235] intel_idle: v0.4 model 0x37
[ 0.374238] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.374460] GHES: HEST is not enabled!
[ 0.374613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.394909] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.395990] hpet: number irqs doesn't agree with number of timers
[ 0.396024] Linux agpgart interface v0.103
[ 0.396109] rtc_cmos 00:00: RTC can wake from S4
[ 0.396382] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.396413] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 0.396432] Intel P-state driver initializing.
[ 0.396709] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.397338] TCP: cubic registered
[ 0.398118] NET: Registered protocol family 10
[ 0.399444] NET: Registered protocol family 17
[ 0.401489] Loading compiled-in X.509 certificates
[ 0.401523] registered taskstats version 1
[ 0.402998] Magic number: 6:785:649
[ 0.403061] acpi LNXCPU:02: hash matches
[ 0.403367] rtc_cmos 00:00: setting system clock to 2014-11-14 20:38:52 UTC (1415997532)
[ 0.404025] PM: Hibernation image not present or could not be loaded.
[ 0.407661] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.407671] Write protecting the kernel read-only data: 8192k
[ 0.415930] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[ 0.419109] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.434439] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.464489] sdhci: Secure Digital Host Controller Interface driver
[ 0.464494] sdhci: Copyright(c) Pierre Ossman
[ 0.471477] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.471481] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.471995] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.480290] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev e)
[ 0.481461] sdhci-pci 0000:00:12.0: No vmmc regulator found
[ 0.481466] sdhci-pci 0000:00:12.0: No vqmmc regulator found
[ 0.483289] ACPI: bus type USB registered
[ 0.483335] usbcore: registered new interface driver usbfs
[ 0.483355] usbcore: registered new interface driver hub
[ 0.483418] usbcore: registered new device driver usb
[ 0.485860] mmc0: SDHCI controller on PCI [0000:00:12.0] using ADMA
[ 0.485891] sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev e)
[ 0.487077] sdhci-pci 0000:00:17.0: No vmmc regulator found
[ 0.487080] sdhci-pci 0000:00:17.0: No vqmmc regulator found
[ 0.488267] mmc1: SDHCI controller on PCI [0000:00:17.0] using ADMA
[ 0.500911] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.500924] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.501319] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.501349] xhci_hcd 0000:00:14.0: irq 87 for MSI/MSI-X
[ 0.501680] hub 1-0:1.0: USB hub found
[ 0.501699] hub 1-0:1.0: 6 ports detected
[ 0.502403] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.502411] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.502682] hub 2-0:1.0: USB hub found
[ 0.502697] hub 2-0:1.0: 1 port detected
[ 0.536044] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.682960] mmc1: BKOPS_EN bit is not set
[ 0.753714] mmc1: new HS200 MMC card at address 0001
[ 0.757972] mmcblk0: mmc1:0001 HBG4e 29.1 GiB
[ 0.758296] mmcblk0boot0: mmc1:0001 HBG4e partition 1 4.00 MiB
[ 0.758656] mmcblk0boot1: mmc1:0001 HBG4e partition 2 4.00 MiB
[ 0.759001] mmcblk0rpmb: mmc1:0001 HBG4e partition 3 4.00 MiB
[ 0.760381] mmcblk0: p1
[ 0.769458] mmcblk0boot1: unknown partition table
[ 0.776772] mmcblk0boot0: unknown partition table
[ 0.861284] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.039303] hub 1-2:1.0: USB hub found
[ 1.039605] hub 1-2:1.0: 4 ports detected
[ 1.040760] usb: failed to peer 1-2-port1 and usb2-port1 by location (1-2-port1:none) (usb2-port1:usb1-port1)
[ 1.040784] usb 1-2-port1: failed to peer to usb2-port1 (-16)
[ 1.040793] usb: port power management may be unreliable
[ 1.041303] usb: failed to peer 1-2-port2 and usb2-port1 by location (1-2-port2:none) (usb2-port1:usb1-port1)
[ 1.041322] usb 1-2-port2: failed to peer to usb2-port1 (-16)
[ 1.041742] usb: failed to peer 1-2-port3 and usb2-port1 by location (1-2-port3:none) (usb2-port1:usb1-port1)
[ 1.041761] usb 1-2-port3: failed to peer to usb2-port1 (-16)
[ 1.042168] usb: failed to peer 1-2-port4 and usb2-port1 by location (1-2-port4:none) (usb2-port1:usb1-port1)
[ 1.042186] usb 1-2-port4: failed to peer to usb2-port1 (-16)
[ 1.204964] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.365057] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[ 1.458942] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
[ 2.365981] Switched to clocksource tsc
[ 9.024844] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 9.027472] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 9.028069] mmcblk0rpmb: retrying using single block read
[ 9.030203] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.032796] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.035371] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.037958] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.040486] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.043040] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 9.043462] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 9.043805] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 17.277306] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 17.279940] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 17.293029] mmcblk0rpmb: retrying using single block read
[ 17.295226] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.323127] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.351243] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.379502] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.407857] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.436111] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 17.462187] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 17.475265] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 17.568142] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
[ 17.922112] random: nonblocking pool is initialized
[ 45.820995] EXT4-fs (mmcblk0p1): 4 orphan inodes deleted
[ 45.821014] EXT4-fs (mmcblk0p1): recovery complete
[ 45.839454] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 46.315355] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 46.454989] systemd-journald[128]: File /var/log/journal/c1ea0510636b4ead93870d2114f006f5/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 46.469206] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
[ 46.543132] systemd-journald[128]: Received request to flush runtime journal from PID 1
[ 46.757953] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 46.759247] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 46.759257] ACPI: Power Button [PWRB]
[ 46.759346] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 46.759350] ACPI: Sleep Button [SLPB]
[ 46.759441] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 46.759490] ACPI: Lid Switch [LID]
[ 46.759576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 46.759580] ACPI: Power Button [PWRF]
[ 46.785055] mei_txe 0000:00:1a.0: irq 88 for MSI/MSI-X
[ 46.832919] ACPI: AC Adapter [ACAD] (on-line)
[ 46.845651] wmi: Mapper loaded
[ 46.852089] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 46.878734] snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
[ 46.879800] hidraw: raw HID events driver (C) Jiri Kosina
[ 46.879829] [drm] Initialized drm 1.1.0 20060810
[ 46.888955] ACPI: Battery Slot [BAT1] (battery present)
[ 46.910854] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201f conflicts with OpRegion 0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 46.910865] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 46.914888] bcma: bus0: Found chip with id 0xA886, rev 0x01 and package 0x08
[ 46.914912] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
[ 46.914930] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
[ 46.915040] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
[ 46.915081] bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
[ 46.921669] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 46.921694] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 46.929220] r8169 0000:03:00.0: irq 90 for MSI/MSI-X
[ 46.929504] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000356000, c4:54:44:c3:00:9c, XID 0c000800 IRQ 90
[ 46.929508] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 46.929921] thermal LNXTHERM:00: registered as thermal_zone1
[ 46.929925] ACPI: Thermal Zone [TZ01] (42 C)
[ 46.937929] bcma: bus0: Bus registered
[ 46.944450] [drm] Memory usable by graphics device = 2048M
[ 46.944457] [drm] Replacing VGA console driver
[ 46.944463] checking generic (a0000 10000) vs hw (80000000 10000000)
[ 46.944465] fb: switching to inteldrmfb from EFI VGA
[ 46.944514] Console: switching to colour dummy device 80x25
[ 46.946311] i915 0000:00:02.0: irq 91 for MSI/MSI-X
[ 46.946327] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 46.946330] [drm] Driver supports precise vblank timestamp query.
[ 47.025611] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 47.066033] [drm] VBT doesn't support DRRS
[ 47.195396] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[ 47.211039] fbcon: inteldrmfb (fb0) is primary device
[ 48.893803] Console: switching to colour frame buffer device 170x48
[ 48.922732] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 48.922746] i915 0000:00:02.0: registered panic notifier
[ 48.968459] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 48.968951] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 48.969149] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 55.143879] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 55.146515] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 55.146934] mmcblk0rpmb: retrying using single block read
[ 55.149180] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.151614] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.154086] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.156560] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.159039] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.161459] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 55.161802] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 55.162057] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 63.388980] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
[ 63.391496] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
[ 63.391966] mmcblk0rpmb: retrying using single block read
[ 63.394102] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.396574] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.399050] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.401468] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.403913] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.406388] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
[ 63.406700] end_request: I/O error, dev mmcblk0rpmb, sector 8064
[ 63.406951] Buffer I/O error on device mmcblk0rpmb, logical block 1008
[ 63.423775] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 63.529519] media: Linux media interface: v0.10
[ 63.580182] Linux video capture interface: v2.00
[ 63.608499] Bluetooth: Core ver 2.19
[ 63.608788] NET: Registered protocol family 31
[ 63.608794] Bluetooth: HCI device and connection manager initialized
[ 63.608807] Bluetooth: HCI socket layer initialized
[ 63.608815] Bluetooth: L2CAP socket layer initialized
[ 63.608833] Bluetooth: SCO socket layer initialized
[ 63.642483] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469)
[ 63.650153] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input7
[ 63.650314] usbcore: registered new interface driver uvcvideo
[ 63.650318] USB Video Class driver (1.1.1)
[ 63.665373] intel_rapl: Found RAPL domain package
[ 63.665379] intel_rapl: Found RAPL domain core
[ 63.688550] iTCO_vendor_support: vendor-support=0
[ 63.701582] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 63.701652] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 63.701827] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 63.739578] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 63.739584] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 63.739588] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 63.739590] sound hdaudioC0D0: mono: mono_out=0x0
[ 63.739593] sound hdaudioC0D0: inputs:
[ 63.739596] sound hdaudioC0D0: Mic=0x12
[ 63.807591] usbcore: registered new interface driver btusb
[ 63.809964] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 63.859693] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 63.859712] acer_wmi: Function bitmap for Communication Button: 0x801
[ 63.859861] acer_wmi: Brightness must be controlled by acpi video driver
[ 63.871050] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 63.873001] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 63.875263] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
[ 63.875363] input: Acer WMI hotkeys as /devices/virtual/input/input10
[ 63.879763] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[ 63.896357] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.904021] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.904883] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.905761] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.906614] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
[ 63.906794] input: SYN1B7D:01 06CB:2991 UNKNOWN as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:2991.0001/input/input12
[ 63.907001] hid-multitouch 0018:06CB:2991.0001: input,hidraw0: <UNKNOWN> HID v1.00 Mouse [SYN1B7D:01 06CB:2991] on
[ 63.967191] mousedev: PS/2 mouse device common for all mice
[ 64.026205] cfg80211: Calling CRDA to update world regulatory domain
[ 64.458411] r8169 0000:03:00.0 enp3s0: link down
[ 64.458485] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 64.458497] r8169 0000:03:00.0 enp3s0: link down
[ 65.817131] Bluetooth: hci0 command 0x1003 tx timeout
[ 66.041823] r8169 0000:03:00.0 enp3s0: link up
[ 66.041860] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
journalctl -xn gives:
-- Logs begin at Fr 2014-11-14 20:35:40 CET, end at Fr 2014-11-14 21:40:11 CET. --
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Timers.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Starting Sockets.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Sockets.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Starting Basic System.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Basic System.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Starting Default.
-- Subject: Unit UNIT has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has begun starting up.
Nov 14 21:40:08 weierstrass systemd[302]: Reached target Default.
-- Subject: Unit UNIT has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit UNIT has finished starting up.
-- The start-up result is done.
Nov 14 21:40:08 weierstrass systemd[302]: Startup finished in 29ms.
-- Subject: System start-up is now complete
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- All system services necessary queued for starting at boot have been
-- successfully started. Note that this does not mean that the machine is
-- now idle as services might still be busy with completing start-up.
-- Kernel start-up required KERNEL_USEC microseconds.
-- Initial RAM disk start-up required INITRD_USEC microseconds.
-- Userspace start-up required 29200 microseconds.
Nov 14 21:40:08 weierstrass login[179]: ROOT LOGIN ON tty1
Nov 14 21:40:11 weierstrass dhcpcd[301]: enp3s0: no IPv6 Routers available
... which looks pretty fine to me...
No, no other issues so far.
How could I find out if some autologin is set up?

Similar Messages

  • [SOLVED] [...] to an access point only immediately after booting.

    I recently got a new router (D-link DIR-615E3), and installed dd-wrt on it. Now, the wired connection works perfectly, and so do wireless connections from any device but my computer.
    The connection works well if I connect it right after booting,
    root /home/martin # iwconfig wlan0 essid Hochelaga
    root /home/martin # iwconfig wlan0
    wlan0 IEEE 802.11bgn ESSID:"Hochelaga"
    Mode:Managed Frequency:2.462 GHz Access Point: B8:A3:86:4B:67:D0
    Bit Rate=36 Mb/s Tx-Power=15 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:on
    Link Quality=70/70 Signal level=-23 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:1 Missed beacon:0
    Yet, if I try to do it again at any other time, the video card doesn't associate itself with the access point.
    root /home/martin # iwconfig wlan0 essid off
    root /home/martin # iwconfig wlan0 essid Hochelaga
    root /home/martin # iwconfig wlan0
    wlan0 IEEE 802.11bgn ESSID:"Hochelaga"
    Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:on
    I feel as if I'm missing something obvious, yet I've been trying for a long time and I didn't find any solution. Can someone help me in here?
    Here's is my video card information.
    root /home/martin # lspci | grep Wireless
    04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    Last edited by mFixman (2012-04-14 03:24:25)

    skunktrader wrote:The ath9k driver is broken in 3.3.1 - either wait for 3.3.2 (a few days) or downgrade.  Search the forum -- there are MANY threads with workarounds
    Indeed, that was the problem.

  • [SOLVED] Black screen after boot

    Hello,
    I've been running Arch for a while now successfully, and decided to give Windows 10 a go, so I installed it on the side. Naturally, Windows overwrote the Grub2 bootloader, but I knew that was going to happen.
    So after playing with Windows 10 for a while, I decided to go back to Arch. I put in the Arch Live CD, chrooted into my Arch installation, and ran the grub-install commands
    # grub-install --target=i386-pc --recheck=/dev/sdc
    # grub-mkconfig -o /boot/grub/grub.cfg
    Grub reported no errors, other than something "invading" block 32. But nevertheless reported "success".
    I reboot, and sure enough Grub is there, but when I try to load Arch, the first time I got a message that it was re-checking the /dev/sdc3 (which is where Arch is installed, /dev/sdc2 is where Windows is) because it's mount time is "in the future". That check ran for about 10 seconds, then proceeded with "normal" boot. The problem is... I see the message "/dev/sdc3 is clean" after which the SDDM (former KDM, the display manager) should load.
    But all I see is black screen (not screen turned off, just black). I tried going to tty's (Alt+F1 to F5), but couldn't. I erased the Xorg.0.log (through another chroot) and rebooted with the same problem, then accessed the log later only to find them empty. I tried disabling SDDM and enabling GDM which I had installed, same problem.
    What could it be? I don't even know where to look, as I don't really see any error messages anywhere.
    Thanks!
    Last edited by Deusdies (2014-11-08 04:54:46)

    Once again duck programming, err, problem solving to the rescue.
    I chrooted again and removed the nvidia drivers and disabled sddm. Installed xf86-video-noevau drivers and rebooted. This time I was greeted with tty1. Success!
    Did some more fiddling, but I think it was the SDDM that was the culprit. I uninstalled it, and installed LightDM (with kde-greeter). Enabled the lightdm using systemctl, also removed the noevau with nvidia (back to proprietary), rebooted, and voila, it works! I am greeted with the login screen.

  • Firefox only works after I re-boot my computer

    I just got a new computer last week. It is running Windows 8 - 64 bit. I installed Firefox, used it for a week, set up my bookmarks, etc. and it worked fine. The other day when I logged in and opened Firefox, I couldn't click on anything - nothing would happen - it was like it was frozen. I went into Internet Explorer and also into Google Chrome and they both worked fine - I could click on things and it would do what it was supposed to do. So, I re-booted my computer and then Firefox worked fine. Same thing the next day, Firefox only worked after I re-booted my computer...and also today, same thing. Why is it frozen when I first go into it, but if I re-boot the whole computer, it works? Has me baffled. Any help would be appreciated, because it is my favorite browser. But if this keeps up, I won't be using it anymore. Thank you!
    I have my home page set to Yahoo, so that's where it goes when I open it. When I get there, I can't click on my e-mail, nothing in the toolbar, it's totally frozen.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".
    :[[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • ISE machine authentication - only plug in to the network after booting

    Hi experts.
    I have recently deployed ISE with machine authentication. 
    However, when the machine is already plugged in to the switch before booting, the machine does not authenticate automatically. It isn't until I log on, using a local computer account, that 802.1X authentication occurs. Using wireshark, I have verified again that this authentication is MACHINE authentication, not user-authentication.
    Is there a way to solve this problem, other than having my users unplug their computer and only plug in to the network after booting?
    Eric

    Hi Vattulu,
      The method of machine access restriction will be used, because there is no a plan to use anyconnect NAM on the client environment, since the prerequisite for EAP-chaining is to use anyconnect.
    Regards,
    Eric

  • Filesystem mounts as read only after boot

    Hi!
    I have checked the wiki, the forum posts and poked around on the web but haven't found anything helpful.
    I have just installed arch on my laptop, and after boot the file system is read only.
    Where do I change it so that it is mounted as read write after initial boot up?
    Thanks for any help and pointers!
    Chris Danyael X
    Last edited by Danyael X (2008-09-22 09:35:19)

    Onwards: That did work. with rw I can read and write. Thanks for the help!
    But there is still something that fails early on just after the kernel has been loaded, iit's in the stuff that comes after udev being loaded but the info scrolls by much to fast for me to see.
    Thats what I want to take a look at but I can't find it in /var/log, I'm not sure what that part of the boot up is called so I don't quite know where to start looking for a log of that.
    EDIT: I have now found the reason for that the inittab stuff doesnt log anything at all ever. Seems like I have to hack the scripts to get som logging features in there. I am fairly certain that its the inettab stuff that doesn't reload the filesystem as it should. I'll get back with the modifications I'm contemplating on making on the inittab scripts to enable logging. Found som e interesting stuff on IBM developerworks that describes the nessecary modifications though its for a RHEL system not Arch.
    Last edited by Danyael X (2008-09-24 10:07:28)

  • [SOLVED]Hanging after booting from installation media

    Yesterday I booted from a rw-DVD got to the terminal and could execute commands, connect to the internet and use elink etc no problem. I didn't go through with installation as I wanted to read up more on partitioning my drives for dual booting before actually doing so.
    Trying the same thing today, and it hangs soon after I boot, regardless of whether I do anything. Printing the following:
    nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
    pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xf0 [nouveau] returns -16
    INFO: rcu_preempt detected stalls on CPUs/tasks: { 6} (detected by 1, t=18002 jiffiess, g=974, c=973, q=604)
    This is without me typing anything. If I try to execute a command quickly after booting it sometimes works, but after a couple of minutes it will complain of a soft lockup.
    I've tried burning another disk, and using a USB installation media, but the same thing happens. Any thoughts?
    Edit: Trying to run it on a laptop with i7-4700MQ, 16GB ram, and Intel(R) HD Graphics 4600 / NVIDIA GeForce GTX 770M
    Second Edit: Booted with nomodeset, which worked and allowed me to install. Just trying to sort out the sodding boot loaders now...
    Last edited by glfharris (2014-07-11 22:42:31)

    Welcome to the forum.
    First of all, you should get in the habit of using [ code ] tags when posting code, not [ quote ] tags (well, unless you want to apply some styling to it, like bold, italic, etc).
    This is wrong:
    # umount /dev/sdc
    This is correct:
    # umount /dev/sdc1
    You were trying to unmount the drive as a whole, which obviously isn't mounted, instead of the first (and probably only) partition. Had you followed the advice from the note to use blkid and check if it's mounted, this wouldn't have happened. But the fact that a DVD produced that error puzzles me... I have no experience with UEFI, but I think you need to press F10, F11, or something like that, to able able to get to a UEFI boot menu, and choose the optical unit as source.
    I hope you used a BitTorrent client when downloading the ISO, and not some direct link (which are prone to CRC errors). If you used a direct link, then check the MD5 and make sure that it matches the one from the Download page. For future reference, torrents are checked while they're being downloaded.

  • RMBP13 (2013) 16GB: Always 12GB only after booting..

    I got a MacBook Pro 13' with Retina display (2013) and 16gb of memory RAM.
    However, after booting/reboot/restart the memory nevers has 16gb. It runs with 12gb only (displayed by "clean memory" app).
    Why is that? What is the 4gb gone for? How can I find out? How to fix it?
    Thanks for quick response.

    1) The clean memory app is useless and interferes with OSX's memory management.
    2) Download this program, run it, and post the output in your reply:
    Etresoft: EtreCheck

  • [SOLVED] nvidia driver causes blank screen soon after boot

    Hi,
    I have a NVIDIA 560 and was originally using the nouveau driver, but that gave slow performance when doing anything (eg. resizing windows), so I installed the nvidia driver instead by following the wiki section:
    https://wiki.archlinux.org/index.php/NV … au_drivers
    by essentially just following the scripts given there. After switching to nvidia, the screen goes blank soon after boot. I get back into the system by using nomodeset in menu.cfg.
    My question is how do I even begin to find the problem, eg. what log file(s) should I look in and post?
    Thanks
    Last edited by mark1977 (2012-08-19 17:38:42)

    Yes it's the 560 Ti. Thanks I just installed straight from the repos. I've also installed cuda-sdk and cuda-toolkit. I've compiled the libraries inside /opt/cuda-sdk/CUDALibraries fine.
    No I go to compile the sdk examples by running make in /opt/cuda-sdk/C and get the following error:
    # make
    make[1]: Entering directory `/opt/cuda-sdk/C/common'
    make[1]: Leaving directory `/opt/cuda-sdk/C/common'
    make[1]: Entering directory `/opt/cuda-sdk/C/common'
    make[1]: Leaving directory `/opt/cuda-sdk/C/common'
    make[1]: Entering directory `/opt/cuda-sdk/C/common'
    make[1]: Leaving directory `/opt/cuda-sdk/C/common'
    make[1]: Entering directory `/opt/cuda-sdk/shared'
    make[1]: Leaving directory `/opt/cuda-sdk/shared'
    make[1]: Entering directory `/opt/cuda-sdk/C/src/newdelete'
    make[1]: Leaving directory `/opt/cuda-sdk/C/src/newdelete'
    make[1]: Entering directory `/opt/cuda-sdk/C/src/simpleTextureDrv'
    /usr/bin/ld: cannot find -lcuda
    collect2: error: ld returned 1 exit status
    make[1]: *** [../../bin/linux/release/simpleTextureDrv] Error 1
    make[1]: Leaving directory `/opt/cuda-sdk/C/src/simpleTextureDrv'
    make: *** [src/simpleTextureDrv/Makefile.ph_build] Error 2
    The Makefile itself essentially seems to just include the file /opt/cuda-sdk/C/common/common.mk, which is:
    # Copyright 1993-2011 NVIDIA Corporation. All rights reserved.
    # NVIDIA Corporation and its licensors retain all intellectual property and
    # proprietary rights in and to this software and related documentation.
    # Any use, reproduction, disclosure, or distribution of this software
    # and related documentation without an express license agreement from
    # NVIDIA Corporation is strictly prohibited.
    # Please refer to the applicable NVIDIA end user license agreement (EULA)
    # associated with this source code for terms and conditions that govern
    # your use of this NVIDIA software.
    # Common build script for CUDA source projects for Linux and Mac platforms
    .SUFFIXES : .cu .cu_dbg.o .c_dbg.o .cpp_dbg.o .cu_rel.o .c_rel.o .cpp_rel.o .cubin .ptx
    # Add new SM Versions here as devices with new Compute Capability are released
    SM_VERSIONS := 10 11 12 13 20 21 30
    CUDA_INSTALL_PATH ?= /opt/cuda-toolkit
    ifdef cuda-install
    CUDA_INSTALL_PATH := $(cuda-install)
    endif
    # detect OS
    OSUPPER = $(shell uname -s 2>/dev/null | tr [:lower:] [:upper:])
    OSLOWER = $(shell uname -s 2>/dev/null | tr [:upper:] [:lower:])
    # 'linux' is output for Linux system, 'darwin' for OS X
    DARWIN = $(strip $(findstring DARWIN, $(OSUPPER)))
    ifneq ($(DARWIN),)
    SNOWLEOPARD = $(strip $(findstring 10.6, $(shell egrep "<string>10\.6" /System/Library/CoreServices/SystemVersion.plist)))
    LION = $(strip $(findstring 10.7, $(shell egrep "<string>10\.7" /System/Library/CoreServices/SystemVersion.plist)))
    endif
    # detect 32-bit or 64-bit platform
    HP_64 = $(shell uname -m | grep 64)
    OSARCH= $(shell uname -m)
    # Basic directory setup for SDK
    # (override directories only if they are not already defined)
    SRCDIR ?=
    ROOTDIR ?= ..
    ROOTBINDIR ?= $(ROOTDIR)/../bin
    BINDIR ?= $(ROOTBINDIR)/$(OSLOWER)
    ROOTOBJDIR ?= obj
    LIBDIR := $(ROOTDIR)/../lib
    COMMONDIR := $(ROOTDIR)/../common
    SHAREDDIR := $(ROOTDIR)/../../shared/
    # Compilers
    NVCC := $(CUDA_INSTALL_PATH)/bin/nvcc
    CXX := g++ -fPIC
    CC := gcc -fPIC
    LINK := g++ -fPIC
    # Includes
    INCLUDES += -I. -I$(CUDA_INSTALL_PATH)/include -I$(COMMONDIR)/inc -I$(SHAREDDIR)/inc
    # Warning flags
    CXXWARN_FLAGS := \
    -W -Wall \
    -Wimplicit \
    -Wswitch \
    -Wformat \
    -Wchar-subscripts \
    -Wparentheses \
    -Wmultichar \
    -Wtrigraphs \
    -Wpointer-arith \
    -Wcast-align \
    -Wreturn-type \
    -Wno-unused-function \
    $(SPACE)
    CWARN_FLAGS := $(CXXWARN_FLAGS) \
    -Wstrict-prototypes \
    -Wmissing-prototypes \
    -Wmissing-declarations \
    -Wnested-externs \
    -Wmain \
    # architecture flag for nvcc and gcc compilers build
    CUBIN_ARCH_FLAG :=
    CXX_ARCH_FLAGS :=
    NVCCFLAGS :=
    LIB_ARCH := $(OSARCH)
    # Determining the necessary Cross-Compilation Flags
    # 32-bit OS, but we target 64-bit cross compilation
    ifeq ($(x86_64),1)
    NVCCFLAGS += -m64
    LIB_ARCH = x86_64
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch x86_64
    else
    CXX_ARCH_FLAGS += -m64
    endif
    else
    # 64-bit OS, and we target 32-bit cross compilation
    ifeq ($(i386),1)
    NVCCFLAGS += -m32
    LIB_ARCH = i386
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch i386
    else
    CXX_ARCH_FLAGS += -m32
    endif
    else
    ifeq "$(strip $(HP_64))" ""
    LIB_ARCH = i386
    NVCCFLAGS += -m32
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch i386
    else
    CXX_ARCH_FLAGS += -m32
    endif
    else
    LIB_ARCH = x86_64
    NVCCFLAGS += -m64
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch x86_64
    else
    CXX_ARCH_FLAGS += -m64
    endif
    endif
    endif
    endif
    # Compiler-specific flags (by default, we always use sm_10, sm_20, and sm_30), unless we use the SMVERSION template
    GENCODE_SM10 := -gencode=arch=compute_10,code=\"sm_10,compute_10\"
    GENCODE_SM20 := -gencode=arch=compute_20,code=\"sm_20,compute_20\"
    GENCODE_SM30 := -gencode=arch=compute_30,code=\"sm_30,compute_30\"
    CXXFLAGS += $(CXXWARN_FLAGS) $(CXX_ARCH_FLAGS)
    CFLAGS += $(CWARN_FLAGS) $(CXX_ARCH_FLAGS)
    LINKFLAGS += -L/usr/lib
    LINK += $(LINKFLAGS) $(CXX_ARCH_FLAGS)
    # This option for Mac allows CUDA applications to work without requiring to set DYLD_LIBRARY_PATH
    ifneq ($(DARWIN),)
    LINK += -Xlinker -rpath $(CUDA_INSTALL_PATH)/lib
    endif
    # Common flags
    COMMONFLAGS += $(INCLUDES) -DUNIX
    # If we are enabling GPU based debugging, then we want to use -G, warning that this
    # May have a significant impact on GPU device code, since optimizations are turned off
    ifeq ($(gpudbg),1)
    NVCCFLAGS += -G
    dbg = $(gpudbg)
    endif
    # Debug/release configuration
    ifeq ($(dbg),1)
    COMMONFLAGS += -g
    NVCCFLAGS += -D_DEBUG
    CXXFLAGS += -D_DEBUG
    CFLAGS += -D_DEBUG
    BINSUBDIR := debug
    LIBSUFFIX := D
    else
    COMMONFLAGS += -O2
    BINSUBDIR := release
    LIBSUFFIX :=
    NVCCFLAGS += --compiler-options -fno-strict-aliasing
    CXXFLAGS += -fno-strict-aliasing
    CFLAGS += -fno-strict-aliasing
    endif
    # architecture flag for cubin build
    CUBIN_ARCH_FLAG :=
    # OpenGL is used or not (if it is used, then it is necessary to include GLEW)
    ifeq ($(USEGLLIB),1)
    ifneq ($(DARWIN),)
    OPENGLLIB := -L/System/Library/Frameworks/OpenGL.framework/Libraries
    OPENGLLIB += -lGL -lGLU $(COMMONDIR)/lib/$(OSLOWER)/libGLEW.a
    else
    # this case for linux platforms
    OPENGLLIB := -lGL -lGLU -lX11 -lXi -lXmu
    # check if x86_64 flag has been set, otherwise, check HP_64 is i386/x86_64
    ifeq ($(x86_64),1)
    OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
    else
    ifeq ($(i386),)
    ifeq "$(strip $(HP_64))" ""
    OPENGLLIB += -lGLEW -L/usr/X11R6/lib
    else
    OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
    endif
    endif
    endif
    # check if i386 flag has been set, otehrwise check HP_64 is i386/x86_64
    ifeq ($(i386),1)
    OPENGLLIB += -lGLEW -L/usr/X11R6/lib
    else
    ifeq ($(x86_64),)
    ifeq "$(strip $(HP_64))" ""
    OPENGLLIB += -lGLEW -L/usr/X11R6/lib
    else
    OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
    endif
    endif
    endif
    endif
    endif
    ifeq ($(USEGLUT),1)
    ifneq ($(DARWIN),)
    OPENGLLIB += -framework GLUT
    else
    ifeq ($(x86_64),1)
    OPENGLLIB += -lglut -L/usr/lib64
    endif
    ifeq ($(i386),1)
    OPENGLLIB += -lglut -L/usr/lib
    endif
    ifeq ($(x86_64),)
    ifeq ($(i386),)
    OPENGLLIB += -lglut
    endif
    endif
    endif
    endif
    ifeq ($(USEPARAMGL),1)
    PARAMGLLIB := -lparamgl_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    ifeq ($(USERENDERCHECKGL),1)
    RENDERCHECKGLLIB := -lrendercheckgl_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    ifeq ($(USENVCUVID), 1)
    ifneq ($(DARWIN),)
    NVCUVIDLIB := -L../../common/lib/darwin -lnvcuvid
    endif
    endif
    # Libs
    ifneq ($(DARWIN),)
    LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib $(NVCUVIDLIB)
    else
    ifeq "$(strip $(HP_64))" ""
    ifeq ($(x86_64),1)
    LIB := -L$(CUDA_INSTALL_PATH)/lib64 -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    else
    LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    endif
    else
    ifeq ($(i386),1)
    LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    else
    LIB := -L$(CUDA_INSTALL_PATH)/lib64 -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    endif
    endif
    endif
    # If dynamically linking to CUDA and CUDART, we exclude the libraries from the LIB
    ifeq ($(USECUDADYNLIB),1)
    LIB += ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB} -ldl -rdynamic
    else
    # static linking, we will statically link against CUDA and CUDART
    ifeq ($(USEDRVAPI),1)
    LIB += -L/usr/lib -lcuda ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB}
    else
    ifeq ($(emu),1)
    LIB += -lcudartemu
    else
    LIB += -lcudart
    endif
    LIB += ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB}
    endif
    endif
    ifeq ($(USECUFFT),1)
    ifeq ($(emu),1)
    LIB += -lcufftemu
    else
    LIB += -lcufft
    endif
    endif
    ifeq ($(USECUBLAS),1)
    ifeq ($(emu),1)
    LIB += -lcublasemu
    else
    LIB += -lcublas
    endif
    endif
    ifeq ($(USECURAND),1)
    LIB += -lcurand
    endif
    ifeq ($(USECUSPARSE),1)
    LIB += -lcusparse
    endif
    # Lib/exe configuration
    # Lib/exe configuration
    # Lib/exe configuration
    ifneq ($(STATIC_LIB),)
    TARGETDIR := $(LIBDIR)
    TARGET := $(subst .a,_$(LIB_ARCH)$(LIBSUFFIX).a,$(LIBDIR)/$(STATIC_LIB))
    LINKLINE = ar rucv $(TARGET) $(OBJS)
    else
    ifneq ($(OMIT_CUTIL_LIB),1)
    LIB += -lcutil_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    ifneq ($(OMIT_SHRUTIL_LIB),1)
    LIB += -lshrutil_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    # Device emulation configuration
    ifeq ($(emu), 1)
    NVCCFLAGS += -deviceemu
    CUDACCFLAGS +=
    BINSUBDIR := emu$(BINSUBDIR)
    # consistency, makes developing easier
    CXXFLAGS += -D__DEVICE_EMULATION__
    CFLAGS += -D__DEVICE_EMULATION__
    endif
    TARGETDIR := $(BINDIR)/$(BINSUBDIR)
    TARGET := $(TARGETDIR)/$(EXECUTABLE)
    LINKLINE = $(LINK) -o $(TARGET) $(OBJS) $(LIB)
    endif
    # check if verbose
    ifeq ($(verbose), 1)
    VERBOSE :=
    else
    VERBOSE := @
    endif
    # Check for input flags and set compiler flags appropriately
    ifeq ($(fastmath), 1)
    NVCCFLAGS += -use_fast_math
    endif
    ifeq ($(keep), 1)
    NVCCFLAGS += -keep
    NVCC_KEEP_CLEAN := *.i* *.cubin *.cu.c *.cudafe* *.fatbin.c *.ptx
    endif
    ifdef maxregisters
    NVCCFLAGS += -maxrregcount $(maxregisters)
    endif
    ifeq ($(ptxas), 1)
    NVCCFLAGS += --ptxas-options=-v
    endif
    # Add cudacc flags
    NVCCFLAGS += $(CUDACCFLAGS)
    # Add common flags
    NVCCFLAGS += $(COMMONFLAGS)
    CXXFLAGS += $(COMMONFLAGS)
    CFLAGS += $(COMMONFLAGS)
    ifeq ($(nvcc_warn_verbose),1)
    NVCCFLAGS += $(addprefix --compiler-options ,$(CXXWARN_FLAGS))
    NVCCFLAGS += --compiler-options -fno-strict-aliasing
    endif
    # Set up object files
    OBJDIR := $(ROOTOBJDIR)/$(LIB_ARCH)/$(BINSUBDIR)
    OBJS += $(patsubst %.cpp,$(OBJDIR)/%.cpp.o,$(notdir $(CCFILES)))
    OBJS += $(patsubst %.c,$(OBJDIR)/%.c.o,$(notdir $(CFILES)))
    OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu.o,$(notdir $(CUFILES)))
    # Set up cubin output files
    CUBINDIR := $(SRCDIR)data
    CUBINS += $(patsubst %.cu,$(CUBINDIR)/%.cubin,$(notdir $(CUBINFILES)))
    # Set up PTX output files
    PTXDIR := $(SRCDIR)data
    PTXBINS += $(patsubst %.cu,$(PTXDIR)/%.ptx,$(notdir $(PTXFILES)))
    # Rules
    $(OBJDIR)/%.c.o : $(SRCDIR)%.c $(C_DEPS)
    $(VERBOSE)$(CC) $(CFLAGS) -o $@ -c $<
    $(OBJDIR)/%.cpp.o : $(SRCDIR)%.cpp $(C_DEPS)
    $(VERBOSE)$(CXX) $(CXXFLAGS) -o $@ -c $<
    # Default arch includes gencode for sm_10, sm_20, sm_30, and other archs from GENCODE_ARCH declared in the makefile
    $(OBJDIR)/%.cu.o : $(SRCDIR)%.cu $(CU_DEPS)
    $(VERBOSE)$(NVCC) $(GENCODE_SM10) $(GENCODE_ARCH) $(GENCODE_SM20) $(GENCODE_SM30) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -c $<
    # Default arch includes gencode for sm_10, sm_20, sm_30, and other archs from GENCODE_ARCH declared in the makefile
    $(CUBINDIR)/%.cubin : $(SRCDIR)%.cu cubindirectory
    $(VERBOSE)$(NVCC) $(GENCODE_SM10) $(GENCODE_ARCH) $(GENCODE_SM20) $(GENCODE_SM30) $(CUBIN_ARCH_FLAG) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -cubin $<
    $(PTXDIR)/%.ptx : $(SRCDIR)%.cu ptxdirectory
    $(VERBOSE)$(NVCC) $(CUBIN_ARCH_FLAG) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -ptx $<
    # The following definition is a template that gets instantiated for each SM
    # version (sm_10, sm_13, etc.) stored in SMVERSIONS. It does 2 things:
    # 1. It adds to OBJS a .cu_sm_XX.o for each .cu file it finds in CUFILES_sm_XX.
    # 2. It generates a rule for building .cu_sm_XX.o files from the corresponding
    # .cu file.
    # The intended use for this is to allow Makefiles that use common.mk to compile
    # files to different Compute Capability targets (aka SM arch version). To do
    # so, in the Makefile, list files for each SM arch separately, like so:
    # This will be used over the default rule abov
    # CUFILES_sm_10 := mycudakernel_sm10.cu app.cu
    # CUFILES_sm_12 := anothercudakernel_sm12.cu
    define SMVERSION_template
    #OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu_$(1).o,$(notdir $(CUFILES_$(1))))
    OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu_$(1).o,$(notdir $(CUFILES_sm_$(1))))
    $(OBJDIR)/%.cu_$(1).o : $(SRCDIR)%.cu $(CU_DEPS)
    # $(VERBOSE)$(NVCC) -o $$@ -c $$< $(NVCCFLAGS) $(1)
    $(VERBOSE)$(NVCC) -gencode=arch=compute_$(1),code=\"sm_$(1),compute_$(1)\" $(GENCODE_SM20) $(GENCODE_SM30) -o $$@ -c $$< $(NVCCFLAGS)
    endef
    # This line invokes the above template for each arch version stored in
    # SM_VERSIONS. The call funtion invokes the template, and the eval
    # function interprets it as make commands.
    $(foreach smver,$(SM_VERSIONS),$(eval $(call SMVERSION_template,$(smver))))
    $(TARGET): makedirectories $(OBJS) $(CUBINS) $(PTXBINS) Makefile
    $(VERBOSE)$(LINKLINE)
    cubindirectory:
    $(VERBOSE)mkdir -p $(CUBINDIR)
    ptxdirectory:
    $(VERBOSE)mkdir -p $(PTXDIR)
    makedirectories:
    $(VERBOSE)mkdir -p $(LIBDIR)
    $(VERBOSE)mkdir -p $(OBJDIR)
    $(VERBOSE)mkdir -p $(TARGETDIR)
    tidy :
    $(VERBOSE)find . | egrep "#" | xargs rm -f
    $(VERBOSE)find . | egrep "\~" | xargs rm -f
    clean : tidy
    $(VERBOSE)rm -f *.stub.c *.gpu *.cu.cpp *.i *.ii
    $(VERBOSE)rm -f *.cubin *.ptx *.fatbin.c *.hash
    $(VERBOSE)rm -f *.cudafe1.c *.cudafe2.c *.cudafe1.cpp *.cudafe2.cpp
    $(VERBOSE)rm -f $(OBJS)
    $(VERBOSE)rm -f $(CUBINS)
    $(VERBOSE)rm -f $(PTXBINS)
    $(VERBOSE)rm -f $(TARGET)
    $(VERBOSE)rm -f $(NVCC_KEEP_CLEAN)
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.ppm
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.pgm
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.bin
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.bmp
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.txt
    $(VERBOSE)rm -f $(CUBINDIR)/*.cubin $(PTXDIR)/*.ptx
    $(VERBOSE)rm -rf $(ROOTOBJDIR)
    $(VERBOSE)rm -rf $(LIBDIR)
    $(VERBOSE)rm -rf $(OBJDIR)
    $(VERBOSE)rm -rf $(TARGETDIR)
    clobber : clean
    $(VERBOSE)rm -rf $(COMMONDIR)/lib/*.a
    $(VERBOSE)rm -rf $(SHAREDDIR)/lib/*.a
    $(VERBOSE)rm -rf $(COMMONDIR)/obj
    $(VERBOSE)rm -rf $(SHAREDDIR)/obj
    The output of echo $LD_LIBRARY_PATH is blank.
    I have checked for libcuda and can find it:
    # ls /usr/lib | grep libcuda
    libcuda.so.1
    libcuda.so.304.32
    Is there something obvious I need to do to get these to compile?
    Thanks again.

  • [SOLVED] systemd/cron as user: timer doesn't start after boot

    Hello,
    I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
    Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
    systemctl --user timer-hourly.timer start
    command every time I start the machine to get the timer running.
    Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
    Thanks!
    My setup consists of the following files:
    /home/myuser/.config/systemd/user:
    drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
    -rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
    -rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
    -rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
    drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
    -rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
    /home/myuser/.config/systemd/user/basic.target.wants/:
    lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
    /home/myuser/.config/systemd/user/timer-hourly.target.wants/:
    lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
    lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
    timer-hourly.timer:
    [Unit]
    Description=Hourly Timer
    [Timer]
    OnBootSec=5min
    OnCalendar=hourly
    Unit=timer-hourly.target
    [Install]
    WantedBy=basic.target
    timer-hourly.target:
    [Unit]
    Description=Hourly Timer Target
    StopWhenUnneeded=yes
    test.service:
    [Unit]
    Description=Run a test (echo) job every hour
    Wants=timer-hourly.timer
    [Service]
    Nice=19
    IOSchedulingClass=2
    IOSchedulingPriority=7
    ExecStart=/usr/bin/python /home/myuser/test_service.py
    [Install]
    WantedBy=timer-hourly.target
    db_backup.service:
    [Unit]
    Description=Backups databases
    Wants=timer-hourly.timer
    [Service]
    Nice=19
    IOSchedulingClass=2
    IOSchedulingPriority=7
    ExecStart=/home/myuser/source/db_backups/db_backup.sh
    [Install]
    WantedBy=timer-hourly.target
    test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
    db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
    Last edited by fede (2014-06-25 21:06:09)

    Have you tried this:
    systemctl --user enable timer-hourly.timer

  • [SOLVED] No (wired) net after boot, yet available with "ip link.."

    Hi,
    I'm on a fully updated (inc. latest systemd), networkmanager based, Arch-X86-64/KDE system.
    The system is connected to the router via eth1 (r8169).
    After boot, I have no net connection (see below), yet, I do get connected, once I issue the "ip link set eth1 up" command.
    Please advise.
    Thanks
    -------copy of terminal----------
    # journalctl -b | grep eth
    Sep 19 07:21:34 Miki_Arch systemd[1]: Expecting device sys-subsystem-net-devices-eth1.device...
    Sep 19 07:21:34 Miki_Arch systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
    Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc900144e4000, 6c:f0:49:ed:b3:e9, XID 083000c0 IRQ 50
    Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:06:00.0 eth1: RTL8168d/8111d at 0xffffc900144e6000, 6c:f0:49:ed:b3:eb, XID 083000c0 IRQ 51
    Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:06:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    Sep 19 07:21:52 Miki_Arch systemd[1]: Starting dhcpcd on eth0...
    Sep 19 07:21:52 Miki_Arch systemd[1]: Starting dhcpcd on eth1...
    Sep 19 07:21:53 Miki_Arch kernel: r8169 0000:06:00.0 eth1: link down
    Sep 19 07:21:53 Miki_Arch kernel: r8169 0000:06:00.0 eth1: link down
    Sep 19 07:21:53 Miki_Arch kernel: IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
    Sep 19 07:21:53 Miki_Arch kernel: r8169 0000:05:00.0 eth0: link down
    Sep 19 07:21:53 Miki_Arch kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    Sep 19 07:21:55 Miki_Arch dhcpcd[343]: eth1: waiting for carrier
    Sep 19 07:21:55 Miki_Arch dhcpcd[340]: eth0: waiting for carrier
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): carrier is OFF
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): new Ethernet device (driver: 'r8169' ifindex: 2)
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): preparing device.
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): deactivating device (reason 'managed') [2]
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:07.0/0000:05:00.0/net/eth0
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): carrier is OFF
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): new Ethernet device (driver: 'r8169' ifindex: 3)
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): exported as /org/freedesktop/NetworkManager/Devices/1
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): preparing device.
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): deactivating device (reason 'managed') [2]
    Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> Added default wired connection 'Wired connection 2' for /sys/devices/pci0000:00/0000:00:09.0/0000:06:00.0/net/eth1
    Sep 19 07:22:25 Miki_Arch systemd[1]: [email protected]: control process exited, code=exited status=1
    Sep 19 07:22:25 Miki_Arch systemd[1]: Failed to start dhcpcd on eth0.
    Sep 19 07:22:25 Miki_Arch systemd[1]: Unit [email protected] entered failed state.
    Sep 19 07:22:25 Miki_Arch systemd[1]: [email protected]: control process exited, code=exited status=1
    Sep 19 07:22:25 Miki_Arch systemd[1]: Failed to start dhcpcd on eth1.
    Sep 19 07:22:25 Miki_Arch systemd[1]: Unit [email protected] entered failed state.
    Last edited by mibadt (2013-09-20 02:54:28)

    Seems like you are running both NetworkManager and [email protected]. Pick one so they don't have to compete with each other.

  • Video problem after boot [SOLVED]

    Hi everyone, I have the this issue
    I already installed arch on a vaio VGN-S360 but after it boot the screen first goes white per pixel, I mean each pixel goes from black to white and then to black I don't know how to explain it exactly. The thing is that the screen after boot the system is completely black.
    I can access like root, and reboot so I realize that the command line is operational but the screen is no giving me the output.
    Can it be a grub problem or a specific hardware issue???
    Any suggestion and help will be helpful
    thanks everyone
    Last edited by k_ibou (2009-11-13 21:40:40)

    I found the solution to the issue, this laptop has a ATI graphic card and it seems that the problem is there.
    in the boot menu, hit ' e ' for edit the menu settings and and the end of the linux line add radeon.modeset=0
    whit that the system goes fine.
    I thinks that I should add that line to the menu.lst

  • Osx Lion memory leak: my MacBook pro is usable only 10 minutes after boot

    Hi all,
    10 minutes after boot it works just fine, but then it slows down and take centuries to open any application. Checked with Activity monitor:
    on a boot, no user applications running: Free memory: 2,35 Gb, Wired: 459,7 Mb, Active 3 Mb, Inactive: 1,18 Gb
    In 10 minutes, idle: Free memory: 8,4 Mb, Wired: 468,1 Mb, Active 2,36 Gb, Inactive: 1,17 Gb
    Somehow all the free memory leaks to the active one, without me doing anything. I tried launching several programs to see if the memory will get adjusted accordingly, but it does not. Time machine is stopped. Tried disk repair is CMD+R mode, fixed permissions, killed most of the user processes - no success.
    I've installed Lion on top of Snow Leopard a month ago and didnt feel any problems so far... Now my MacBook pro 2,4 GHz is completely useless, finally, after 6 years of seamless work :( Thanks, Lion
    Any ideas how to deal with it?
    Thanks,

    I do not see anything like this on my system which would lead me to believe you may have a defective installation. So, my suggestion:
    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

         Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
          After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
         After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
         The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
         At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
         Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    Copy a line of text in this window to the Clipboard.
    Paste into the window of another application.
    Wait for the test to run. It usually takes a few minutes.
    Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */  /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n  "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n  [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n  ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Time Machine backups only work after restart

    Hi
    Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
    I have a Mid 2014 MBP 13 in running 10.10.2
    I backup onto an external USB via a hub.
    Things I have tried with review of Pondini great site which has helped with different TM backup problems.
    Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
    Direct USB connection
    Backup via Airport Extreme
    Re-index spotlight
    Reformat USB disk
    New USB disk!
    Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
    Any help gratefully received
    19/03/2015 12:59:07.730 pm
    com.apple.prefs.backup.remoteservice[2916]
    Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
    19/03/2015 12:59:10.238 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
    19/03/2015 12:59:10.240 pm
    UserEventAgent[16]
    com.apple.backupd-auto launchd job enabled
    19/03/2015 12:59:10.238 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 12:59:10.239 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
    19/03/2015 12:59:23.162 pm
    com.apple.backupd[2929]
    Starting manual backup
    19/03/2015 12:59:23.358 pm
    com.apple.backupd[2929]
    Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
    19/03/2015 1:01:55.000 pm
    kernel[0]
    process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
    19/03/2015 1:12:00.297 pm
    com.apple.backupd[2929]
    Will copy (Zero KB) from Macintosh HD
    19/03/2015 1:12:00.350 pm
    com.apple.backupd[2929]
    Found 221479 files (439.9 MB) needing backup
    19/03/2015 1:12:01.050 pm
    com.apple.backupd[2929]
    2.33 GB required (including padding), 554.92 GB available
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
    19/03/2015 1:21:51.062 pm
    com.apple.backupd[167]
    Starting manual backup
    19/03/2015 1:21:51.380 pm
    com.apple.backupd[167]
    Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
    19/03/2015 1:24:40.000 pm
    kernel[0]
    process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
    19/03/2015 1:24:40.821 pm
    spindump[507]
    Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
    19/03/2015 1:34:29.100 pm
    com.apple.backupd[167]
    Will copy (Zero KB) from Macintosh HD
    19/03/2015 1:34:29.155 pm
    com.apple.backupd[167]
    Found 221268 files (493.5 MB) needing backup
    19/03/2015 1:34:29.235 pm
    com.apple.backupd[167]
    2.39 GB required (including padding), 554.92 GB available
    19/03/2015 1:35:57.393 pm
    com.apple.backupd[167]
    Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
    19/03/2015 1:36:33.451 pm
    com.apple.backupd[167]
    Created new backup: 2015-03-19-133632
    19/03/2015 1:36:39.933 pm
    com.apple.backupd[167]
    Starting post-backup thinning
    19/03/2015 1:36:39.943 pm
    com.apple.backupd[167]
    Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
    19/03/2015 1:36:39.944 pm
    com.apple.backupd[167]
    Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
    19/03/2015 1:36:53.268 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
    19/03/2015 1:37:05.844 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
    19/03/2015 1:37:12.476 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
    19/03/2015 1:37:12.476 pm
    com.apple.backupd[167]
    Post-backup thinning complete: 3 expired backups removed
    19/03/2015 1:37:12.495 pm
    com.apple.backupd[167]
    Backup completed successfully.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for

  • I have a problem printing out my contact book.

    I have and iMac with Mountain Lion.  My pbroblem is printing out my contact book of 102 contacts.  The contact book is arranged alphabetically by last name, but when I print it, it is printed in a random order.  What is my problem and what shoulld I

  • Network printer not printing pdf and ms office files

    Hi,       we have a printer HP P3015 on network proper configuarded and printing from 6 pcs (office, pdf and all other documents) ony 3 pcs problem that won`t printing from world, excel, and pdf. and printing from not pad and from web properly. and w

  • How do I enable airplay?

    I got the iPhone 5c, and I have read a support tab about how to enable it. Here's the link. https://discussions.apple.com/thread/5334698 My iPhone is up-to-day, and it says I have to be in the control center to turn it on, but when I open it up, all

  • How to display different message for More.. in jsp ?

    Hi, We have requirement where we have to display See All after say after 10 dimVals . I have enable dynamic refinement ranking and put value as 10 also I have checked the box for More.. I want to display See All instead of More.. in my application. P

  • Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20

    I have a C# windows application that started to give me the error when I try to run it: Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20. I was adding and removing references and re-build when this started. The builds are succes