[SOLVED] Openbox Autostarting only some programs

Ok, so I've tried searching the forums and either cannot find the one that answers my question or it doesn't exist.  Either way, I have my openbox autostart script set up like this:
xcompmgr &
nitrogen --restore &
yakuake &
cairo-dock &
The file is saved as ~/.config/openbox/autostart.sh Only cairo dock and yakuake start up at the start of the openbox session.  The cairo dock has the black box around it from xcompmgr not being run but then if i manually start it in a terminal with "xcompmgr" then it goes away like it should.  So xcompmgr won't autostart and nitrogen won't restore either.  Nitrogen works if I manually do it after the openbox session has begun but only stays while i'm logged in, no restoring upon next login.  I'm trying to figure out if I have some syntax wrong?  I've tried separating the xcompmgr as far away from the cairo dock to give it more time to load but nothing...any help would be very appreciated.
other info: I have no DE, just the dock, openbox and nitrogen for my desktop.
Last edited by DonTonberry (2012-10-05 00:48:00)

did as you said 2ManyDogs and received this:
~]$ ~/.config/openbox/autostart.sh
/home/tonberry/.config/openbox/autostart.sh: line 3: $'\357\273\277nitrogen': command not found
/home/tonberry/.config/openbox/autostart.sh: line 1: $'\357\273\277xcompmgr': command not found
[tonberry@knife ~]$ QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
Yakuake is already running, opening window....
============================================================================
Cairo-Dock version : 3.0.2
Compiled date : Jul 16 2012 19:29:57
Built with GTK : 3.4
Running with OpenGL: 1
============================================================================
CairoKeyBinding '<Super>L' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Super>L' (Log out: Lock the screen)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Control>F12' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Control>F12' (Log out: Show the log-out menu)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Control>Return' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Control>Return' (Scooby-Do: Enable/disable the Finder)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Super>Return' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Super>Return' (Control from keyboard: Enable/disable the keyboard control of the dock)
This shortkey is probably already used by another applet or another application
CairoKeyBinding '<Shift><Ctrl>F4' failed!
warning : (/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-3.0.2/src/gldit/cairo-dock-keybinder.c:cd_keybinder_bind:283)
Couldn't bind '<Shift><Ctrl>F4' (Show Desktop: Expose all the desktops)
This shortkey is probably already used by another applet or another application

Similar Messages

  • [SOLVED] Unable to open some programs in KDE, HFS+ partiton needs fsck

    I've had two unsettling experiences today; I'm not sure if they're related or not.
    I have a Mid-2012 MacBook Pro. I installed bluez + bluez-utils 5.13.1-1 in order to use an Apple Wireless Keyboard and Magic Trackpad. Following the instructions in the wiki for setting up bluetooth devices using bluetoothctl, I was able to connect to the keyboard without a hitch. However, when I connected the trackpad, I would be able to move the mouse for a few seconds and then the whole system would freeze and I would have to force reboot. I tried this a few a times. I couldn't find any errors in the logs or dmesg; the last entry in dmesg would always show the trackpad being connected, so it seemed like whatever happened after that wasn't being logged. I found a couple recent bug reports, one for Arch and one for Fedora, with similar issues.
    I ran pacman -Syu in case my problem was due to outdated drivers or something, but it didn't get fixed. It's possible that the problems I've having now were caused by the update and have nothing to do with the trackpad, but I don't know.
    Here's what was upgraded:
    [2014-01-08 17:33] [PACMAN] starting full system upgrade
    [2014-01-08 17:34] [PACMAN] upgraded glibc (2.18-11 -> 2.18-12)
    [2014-01-08 17:34] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2014-01-08 17:34] [PACMAN] upgraded kdebase-workspace (4.11.4-2 -> 4.11.5-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-glibc (2.18-11 -> 2.18-12)
    [2014-01-08 17:34] [PACMAN] upgraded libdrm (2.4.50-1 -> 2.4.51-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-libdrm (2.4.50-1 -> 2.4.51-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-nvidia-304xx-utils (304.117-1 -> 304.117-3)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-pcre (8.33-1 -> 8.34-1)
    [2014-01-08 17:34] [PACMAN] upgraded libcap (2.23-2 -> 2.24-1)
    [2014-01-08 17:34] [PACMAN] upgraded librsvg (1:2.40.1-1 -> 1:2.40.1-3)
    [2014-01-08 17:34] [PACMAN] upgraded libxfont (1.4.6-1 -> 1.4.7-1)
    [2014-01-08 17:34] [PACMAN] upgraded mesa (10.0.1-1 -> 10.0.1-2)
    [2014-01-08 17:34] [PACMAN] upgraded openssl (1.0.1.e-5 -> 1.0.1.f-1)
    [2014-01-08 17:34] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-01-08 17:34] [PACMAN] upgraded pacman-mirrorlist (20130830-1 -> 20140107-1)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server-common (1.14.5-1 -> 1.14.5-2)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server (1.14.5-1 -> 1.14.5-2)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server-devel (1.14.5-1 -> 1.14.5-2)
    In any case, now I can't open some programs; Skype and Okular both spend a while trying to open and then close again before anything happens. I also can't open the KDE application menu, although I can still launch programs with the quick launcher.
    Also, I have a non-journaled HFS partition that I use to store media and has been working fine, but now I can't write to it. In dmesg there's an entry from hfsplus saying "Filesystem wasn't unmounted cleanly, mounting it as read-only" and suggesting I run fsck.hfsplus, which doesn't seem to exist. I assume this message refers to my media partition. I tried doing a systemctl short health test which checked out fine, but I don't know that that really has much meaning here. I do have a backup of it if anything risky or drastic needs to be done.
    I'm generally new to Linux and not quite sure how to go about troubleshooting all this. I'd love some places to look, stuff to try, etc. Maybe I should try downgrading X server? I see some potentially weird stuff in my logs but nothing that looks like a smoking gun to me. However, I might just not know enough at this point to be able to recognize it.
    dmesg:
    There're a few firmware bugs and a segfault in konsole (see 0.047701, 0.257523, 12.077596, 27.185098).
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008cd12fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000008cd53000-0x000000008cd68fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cece000-0x000000008cefefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008cf91fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cf92000-0x000000008cffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008d000000-0x000000008f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016f5fffff] usable
    [ 0.000000] e820: update [mem 0x8970c190-0x89721dcf] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008dfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000008e000-0x000000000008ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x000000008970c18f] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008970c190-0x0000000089721dcf] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000089721dd0-0x000000008cd12fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x000000008cd53000-0x000000008cd68fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cece000-0x000000008cefefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008ceff000-0x000000008cf91fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cf92000-0x000000008cffefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008cfff000-0x000000008cffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008d000000-0x000000008f9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000016f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v1.10 by Apple
    [ 0.000000] efi: ACPI=0x8cd8e000 ACPI 2.0=0x8cd8e014 SMBIOS=0x8cd1b000
    [ 0.000000] efi: mem00: type=7, attr=0x80000000000000f, range=[0x0000000000000000-0x000000000008e000) (0MB)
    [ 0.000000] efi: mem01: type=0, attr=0x80000000000000f, range=[0x000000000008e000-0x0000000000090000) (0MB)
    [ 0.000000] efi: mem02: type=2, attr=0x80000000000000f, range=[0x0000000000090000-0x000000000009a000) (0MB)
    [ 0.000000] efi: mem03: type=7, attr=0x80000000000000f, range=[0x000000000009a000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f54000) (15MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001f54000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcd7000) (1020MB)
    [ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fcd7000-0x0000000080000000) (3MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x0000000088fbc000) (143MB)
    [ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000088fbc000-0x000000008936f000) (3MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000008936f000-0x000000008970c000) (3MB)
    [ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000008970c000-0x000000008972d000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000008972d000-0x0000000089741000) (0MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000089741000-0x0000000089742000) (0MB)
    [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000089742000-0x0000000089746000) (0MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000089746000-0x0000000089747000) (0MB)
    [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x0000000089747000-0x0000000089cb2000) (5MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000089cb2000-0x0000000089cb4000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x0000000089cb4000-0x0000000089ccf000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000089ccf000-0x0000000089cd0000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x0000000089cd0000-0x0000000089d0f000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000089d0f000-0x0000000089d24000) (0MB)
    [ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x0000000089d24000-0x0000000089d4a000) (0MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000089d4a000-0x0000000089d4b000) (0MB)
    [ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x0000000089d4b000-0x0000000089d4d000) (0MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000089d4d000-0x0000000089d53000) (0MB)
    [ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x0000000089d53000-0x0000000089d55000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000089d55000-0x0000000089d65000) (0MB)
    [ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x0000000089d65000-0x0000000089d99000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000089d99000-0x0000000089dba000) (0MB)
    [ 0.000000] efi: mem34: type=2, attr=0xf, range=[0x0000000089dba000-0x0000000089dbc000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000089dbc000-0x0000000089eb2000) (0MB)
    [ 0.000000] efi: mem36: type=2, attr=0xf, range=[0x0000000089eb2000-0x0000000089eb9000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000089eb9000-0x0000000089ec4000) (0MB)
    [ 0.000000] efi: mem38: type=2, attr=0xf, range=[0x0000000089ec4000-0x0000000089ec5000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000089ec5000-0x0000000089ec7000) (0MB)
    [ 0.000000] efi: mem40: type=2, attr=0xf, range=[0x0000000089ec7000-0x0000000089ecc000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000089ecc000-0x0000000089ecd000) (0MB)
    [ 0.000000] efi: mem42: type=2, attr=0xf, range=[0x0000000089ecd000-0x0000000089ece000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000089ece000-0x0000000089ed2000) (0MB)
    [ 0.000000] efi: mem44: type=2, attr=0xf, range=[0x0000000089ed2000-0x0000000089ed3000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000089ed3000-0x000000008a123000) (2MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000008a123000-0x000000008a143000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000008a143000-0x000000008b3ca000) (18MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x000000008b3ca000-0x000000008b3de000) (0MB)
    [ 0.000000] efi: mem49: type=1, attr=0xf, range=[0x000000008b3de000-0x000000008b413000) (0MB)
    [ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x000000008b413000-0x000000008b41d000) (0MB)
    [ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x000000008b41d000-0x000000008b42b000) (0MB)
    [ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x000000008b42b000-0x000000008b42d000) (0MB)
    [ 0.000000] efi: mem53: type=2, attr=0xf, range=[0x000000008b42d000-0x000000008b42e000) (0MB)
    [ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000008b42e000-0x000000008b42f000) (0MB)
    [ 0.000000] efi: mem55: type=2, attr=0xf, range=[0x000000008b42f000-0x000000008b430000) (0MB)
    [ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000008b430000-0x000000008b433000) (0MB)
    [ 0.000000] efi: mem57: type=2, attr=0xf, range=[0x000000008b433000-0x000000008b435000) (0MB)
    [ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x000000008b435000-0x000000008b436000) (0MB)
    [ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000008b436000-0x000000008b438000) (0MB)
    [ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x000000008b438000-0x000000008b43b000) (0MB)
    [ 0.000000] efi: mem61: type=2, attr=0xf, range=[0x000000008b43b000-0x000000008b43e000) (0MB)
    [ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000008b43e000-0x000000008b43f000) (0MB)
    [ 0.000000] efi: mem63: type=2, attr=0xf, range=[0x000000008b43f000-0x000000008b446000) (0MB)
    [ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000008b446000-0x000000008b543000) (0MB)
    [ 0.000000] efi: mem65: type=2, attr=0xf, range=[0x000000008b543000-0x000000008b544000) (0MB)
    [ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000008b544000-0x000000008b55f000) (0MB)
    [ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x000000008b55f000-0x000000008b567000) (0MB)
    [ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x000000008b567000-0x000000008b57b000) (0MB)
    [ 0.000000] efi: mem69: type=2, attr=0xf, range=[0x000000008b57b000-0x000000008b57c000) (0MB)
    [ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x000000008b57c000-0x000000008b582000) (0MB)
    [ 0.000000] efi: mem71: type=3, attr=0xf, range=[0x000000008b582000-0x000000008b584000) (0MB)
    [ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x000000008b584000-0x000000008b58c000) (0MB)
    [ 0.000000] efi: mem73: type=3, attr=0xf, range=[0x000000008b58c000-0x000000008b593000) (0MB)
    [ 0.000000] efi: mem74: type=4, attr=0xf, range=[0x000000008b593000-0x000000008b594000) (0MB)
    [ 0.000000] efi: mem75: type=3, attr=0xf, range=[0x000000008b594000-0x000000008b595000) (0MB)
    [ 0.000000] efi: mem76: type=4, attr=0xf, range=[0x000000008b595000-0x000000008b597000) (0MB)
    [ 0.000000] efi: mem77: type=3, attr=0xf, range=[0x000000008b597000-0x000000008b598000) (0MB)
    [ 0.000000] efi: mem78: type=4, attr=0xf, range=[0x000000008b598000-0x000000008b599000) (0MB)
    [ 0.000000] efi: mem79: type=2, attr=0xf, range=[0x000000008b599000-0x000000008b59a000) (0MB)
    [ 0.000000] efi: mem80: type=4, attr=0xf, range=[0x000000008b59a000-0x000000008b59e000) (0MB)
    [ 0.000000] efi: mem81: type=3, attr=0xf, range=[0x000000008b59e000-0x000000008b5a3000) (0MB)
    [ 0.000000] efi: mem82: type=4, attr=0xf, range=[0x000000008b5a3000-0x000000008b5bd000) (0MB)
    [ 0.000000] efi: mem83: type=3, attr=0xf, range=[0x000000008b5bd000-0x000000008b5c1000) (0MB)
    [ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x000000008b5c1000-0x000000008b5c5000) (0MB)
    [ 0.000000] efi: mem85: type=2, attr=0xf, range=[0x000000008b5c5000-0x000000008b5c6000) (0MB)
    [ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x000000008b5c6000-0x000000008b5c8000) (0MB)
    [ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x000000008b5c8000-0x000000008b5c9000) (0MB)
    [ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x000000008b5c9000-0x000000008b5ca000) (0MB)
    [ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x000000008b5ca000-0x000000008b5d5000) (0MB)
    [ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x000000008b5d5000-0x000000008b5d9000) (0MB)
    [ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x000000008b5d9000-0x000000008b5db000) (0MB)
    [ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x000000008b5db000-0x000000008b5ec000) (0MB)
    [ 0.000000] efi: mem93: type=2, attr=0xf, range=[0x000000008b5ec000-0x000000008b5ed000) (0MB)
    [ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x000000008b5ed000-0x000000008b5f5000) (0MB)
    [ 0.000000] efi: mem95: type=3, attr=0xf, range=[0x000000008b5f5000-0x000000008b631000) (0MB)
    [ 0.000000] efi: mem96: type=4, attr=0xf, range=[0x000000008b631000-0x000000008b647000) (0MB)
    [ 0.000000] efi: mem97: type=3, attr=0xf, range=[0x000000008b647000-0x000000008b64a000) (0MB)
    [ 0.000000] efi: mem98: type=4, attr=0xf, range=[0x000000008b64a000-0x000000008b681000) (0MB)
    [ 0.000000] efi: mem99: type=3, attr=0xf, range=[0x000000008b681000-0x000000008b68f000) (0MB)
    [ 0.000000] efi: mem100: type=4, attr=0xf, range=[0x000000008b68f000-0x000000008b69d000) (0MB)
    [ 0.000000] efi: mem101: type=3, attr=0xf, range=[0x000000008b69d000-0x000000008b6b1000) (0MB)
    [ 0.000000] efi: mem102: type=4, attr=0xf, range=[0x000000008b6b1000-0x000000008b6b5000) (0MB)
    [ 0.000000] efi: mem103: type=3, attr=0xf, range=[0x000000008b6b5000-0x000000008b6bb000) (0MB)
    [ 0.000000] efi: mem104: type=2, attr=0xf, range=[0x000000008b6bb000-0x000000008b6bc000) (0MB)
    [ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000008b6bc000-0x000000008b6bd000) (0MB)
    [ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x000000008b6bd000-0x000000008b6bf000) (0MB)
    [ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x000000008b6bf000-0x000000008b6c6000) (0MB)
    [ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000008b6c6000-0x000000008b6df000) (0MB)
    [ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000008b6df000-0x000000008b6e0000) (0MB)
    [ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x000000008b6e0000-0x000000008b6e1000) (0MB)
    [ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x000000008b6e1000-0x000000008b6e2000) (0MB)
    [ 0.000000] efi: mem112: type=2, attr=0xf, range=[0x000000008b6e2000-0x000000008b6e3000) (0MB)
    [ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000008b6e3000-0x000000008b6e5000) (0MB)
    [ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x000000008b6e5000-0x000000008b6e6000) (0MB)
    [ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x000000008b6e6000-0x000000008b6e7000) (0MB)
    [ 0.000000] efi: mem116: type=2, attr=0xf, range=[0x000000008b6e7000-0x000000008b6e8000) (0MB)
    [ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x000000008b6e8000-0x000000008b6e9000) (0MB)
    [ 0.000000] efi: mem118: type=3, attr=0xf, range=[0x000000008b6e9000-0x000000008b6eb000) (0MB)
    [ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x000000008b6eb000-0x000000008b6ec000) (0MB)
    [ 0.000000] efi: mem120: type=3, attr=0xf, range=[0x000000008b6ec000-0x000000008b6f1000) (0MB)
    [ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x000000008b6f1000-0x000000008b6f2000) (0MB)
    [ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x000000008b6f2000-0x000000008b6f3000) (0MB)
    [ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x000000008b6f3000-0x000000008b6f6000) (0MB)
    [ 0.000000] efi: mem124: type=3, attr=0xf, range=[0x000000008b6f6000-0x000000008b6f7000) (0MB)
    [ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x000000008b6f7000-0x000000008b6f9000) (0MB)
    [ 0.000000] efi: mem126: type=3, attr=0xf, range=[0x000000008b6f9000-0x000000008b6fb000) (0MB)
    [ 0.000000] efi: mem127: type=2, attr=0xf, range=[0x000000008b6fb000-0x000000008b6fc000) (0MB)
    [ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x000000008b6fc000-0x000000008b6fe000) (0MB)
    [ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x000000008b6fe000-0x000000008b702000) (0MB)
    [ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x000000008b702000-0x000000008b705000) (0MB)
    [ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x000000008b705000-0x000000008b70d000) (0MB)
    [ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x000000008b70d000-0x000000008b710000) (0MB)
    [ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x000000008b710000-0x000000008b715000) (0MB)
    [ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x000000008b715000-0x000000008b716000) (0MB)
    [ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x000000008b716000-0x000000008b717000) (0MB)
    [ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x000000008b717000-0x000000008b718000) (0MB)
    [ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x000000008b718000-0x000000008b71e000) (0MB)
    [ 0.000000] efi: mem138: type=2, attr=0xf, range=[0x000000008b71e000-0x000000008b71f000) (0MB)
    [ 0.000000] efi: mem139: type=4, attr=0xf, range=[0x000000008b71f000-0x000000008b720000) (0MB)
    [ 0.000000] efi: mem140: type=3, attr=0xf, range=[0x000000008b720000-0x000000008b722000) (0MB)
    [ 0.000000] efi: mem141: type=4, attr=0xf, range=[0x000000008b722000-0x000000008b724000) (0MB)
    [ 0.000000] efi: mem142: type=3, attr=0xf, range=[0x000000008b724000-0x000000008b728000) (0MB)
    [ 0.000000] efi: mem143: type=2, attr=0xf, range=[0x000000008b728000-0x000000008b729000) (0MB)
    [ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x000000008b729000-0x000000008b733000) (0MB)
    [ 0.000000] efi: mem145: type=3, attr=0xf, range=[0x000000008b733000-0x000000008b738000) (0MB)
    [ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x000000008b738000-0x000000008b741000) (0MB)
    [ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x000000008b741000-0x000000008b75a000) (0MB)
    [ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x000000008b75a000-0x000000008b75c000) (0MB)
    [ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x000000008b75c000-0x000000008b76a000) (0MB)
    [ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x000000008b76a000-0x000000008b76b000) (0MB)
    [ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x000000008b76b000-0x000000008b76e000) (0MB)
    [ 0.000000] efi: mem152: type=4, attr=0xf, range=[0x000000008b76e000-0x000000008b771000) (0MB)
    [ 0.000000] efi: mem153: type=3, attr=0xf, range=[0x000000008b771000-0x000000008b780000) (0MB)
    [ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x000000008b780000-0x000000008b781000) (0MB)
    [ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x000000008b781000-0x000000008b785000) (0MB)
    [ 0.000000] efi: mem156: type=2, attr=0xf, range=[0x000000008b785000-0x000000008b786000) (0MB)
    [ 0.000000] efi: mem157: type=4, attr=0xf, range=[0x000000008b786000-0x000000008b78b000) (0MB)
    [ 0.000000] efi: mem158: type=3, attr=0xf, range=[0x000000008b78b000-0x000000008b78f000) (0MB)
    [ 0.000000] efi: mem159: type=4, attr=0xf, range=[0x000000008b78f000-0x000000008b792000) (0MB)
    [ 0.000000] efi: mem160: type=2, attr=0xf, range=[0x000000008b792000-0x000000008b793000) (0MB)
    [ 0.000000] efi: mem161: type=4, attr=0xf, range=[0x000000008b793000-0x000000008b797000) (0MB)
    [ 0.000000] efi: mem162: type=3, attr=0xf, range=[0x000000008b797000-0x000000008b798000) (0MB)
    [ 0.000000] efi: mem163: type=4, attr=0xf, range=[0x000000008b798000-0x000000008b79a000) (0MB)
    [ 0.000000] efi: mem164: type=2, attr=0xf, range=[0x000000008b79a000-0x000000008b79b000) (0MB)
    [ 0.000000] efi: mem165: type=4, attr=0xf, range=[0x000000008b79b000-0x000000008b79c000) (0MB)
    [ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x000000008b79c000-0x000000008b7ae000) (0MB)
    [ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x000000008b7ae000-0x000000008b7af000) (0MB)
    [ 0.000000] efi: mem168: type=3, attr=0xf, range=[0x000000008b7af000-0x000000008b7b1000) (0MB)
    [ 0.000000] efi: mem169: type=4, attr=0xf, range=[0x000000008b7b1000-0x000000008b7b3000) (0MB)
    [ 0.000000] efi: mem170: type=3, attr=0xf, range=[0x000000008b7b3000-0x000000008b7bc000) (0MB)
    [ 0.000000] efi: mem171: type=4, attr=0xf, range=[0x000000008b7bc000-0x000000008b7c3000) (0MB)
    [ 0.000000] efi: mem172: type=3, attr=0xf, range=[0x000000008b7c3000-0x000000008b7c4000) (0MB)
    [ 0.000000] efi: mem173: type=4, attr=0xf, range=[0x000000008b7c4000-0x000000008b7c5000) (0MB)
    [ 0.000000] efi: mem174: type=2, attr=0xf, range=[0x000000008b7c5000-0x000000008b7c6000) (0MB)
    [ 0.000000] efi: mem175: type=4, attr=0xf, range=[0x000000008b7c6000-0x000000008b7c7000) (0MB)
    [ 0.000000] efi: mem176: type=3, attr=0xf, range=[0x000000008b7c7000-0x000000008b7d5000) (0MB)
    [ 0.000000] efi: mem177: type=4, attr=0xf, range=[0x000000008b7d5000-0x000000008b7d6000) (0MB)
    [ 0.000000] efi: mem178: type=3, attr=0xf, range=[0x000000008b7d6000-0x000000008b7e3000) (0MB)
    [ 0.000000] efi: mem179: type=4, attr=0xf, range=[0x000000008b7e3000-0x000000008b7e4000) (0MB)
    [ 0.000000] efi: mem180: type=3, attr=0xf, range=[0x000000008b7e4000-0x000000008b7ee000) (0MB)
    [ 0.000000] efi: mem181: type=4, attr=0xf, range=[0x000000008b7ee000-0x000000008b7ef000) (0MB)
    [ 0.000000] efi: mem182: type=3, attr=0xf, range=[0x000000008b7ef000-0x000000008b7f5000) (0MB)
    [ 0.000000] efi: mem183: type=4, attr=0xf, range=[0x000000008b7f5000-0x000000008b7f9000) (0MB)
    [ 0.000000] efi: mem184: type=3, attr=0xf, range=[0x000000008b7f9000-0x000000008b7ff000) (0MB)
    [ 0.000000] efi: mem185: type=4, attr=0xf, range=[0x000000008b7ff000-0x000000008b800000) (0MB)
    [ 0.000000] efi: mem186: type=3, attr=0xf, range=[0x000000008b800000-0x000000008b801000) (0MB)
    [ 0.000000] efi: mem187: type=4, attr=0xf, range=[0x000000008b801000-0x000000008b802000) (0MB)
    [ 0.000000] efi: mem188: type=2, attr=0xf, range=[0x000000008b802000-0x000000008b804000) (0MB)
    [ 0.000000] efi: mem189: type=4, attr=0xf, range=[0x000000008b804000-0x000000008b805000) (0MB)
    [ 0.000000] efi: mem190: type=3, attr=0xf, range=[0x000000008b805000-0x000000008b806000) (0MB)
    [ 0.000000] efi: mem191: type=4, attr=0xf, range=[0x000000008b806000-0x000000008b80b000) (0MB)
    [ 0.000000] efi: mem192: type=3, attr=0xf, range=[0x000000008b80b000-0x000000008b80d000) (0MB)
    [ 0.000000] efi: mem193: type=4, attr=0xf, range=[0x000000008b80d000-0x000000008b810000) (0MB)
    [ 0.000000] efi: mem194: type=2, attr=0xf, range=[0x000000008b810000-0x000000008b811000) (0MB)
    [ 0.000000] efi: mem195: type=3, attr=0xf, range=[0x000000008b811000-0x000000008b812000) (0MB)
    [ 0.000000] efi: mem196: type=4, attr=0xf, range=[0x000000008b812000-0x000000008b814000) (0MB)
    [ 0.000000] efi: mem197: type=3, attr=0xf, range=[0x000000008b814000-0x000000008b817000) (0MB)
    [ 0.000000] efi: mem198: type=4, attr=0xf, range=[0x000000008b817000-0x000000008b819000) (0MB)
    [ 0.000000] efi: mem199: type=3, attr=0xf, range=[0x000000008b819000-0x000000008b824000) (0MB)
    [ 0.000000] efi: mem200: type=4, attr=0xf, range=[0x000000008b824000-0x000000008b826000) (0MB)
    [ 0.000000] efi: mem201: type=3, attr=0xf, range=[0x000000008b826000-0x000000008b828000) (0MB)
    [ 0.000000] efi: mem202: type=4, attr=0xf, range=[0x000000008b828000-0x000000008b82c000) (0MB)
    [ 0.000000] efi: mem203: type=3, attr=0xf, range=[0x000000008b82c000-0x000000008b82d000) (0MB)
    [ 0.000000] efi: mem204: type=4, attr=0xf, range=[0x000000008b82d000-0x000000008b82f000) (0MB)
    [ 0.000000] efi: mem205: type=2, attr=0xf, range=[0x000000008b82f000-0x000000008b830000) (0MB)
    [ 0.000000] efi: mem206: type=4, attr=0xf, range=[0x000000008b830000-0x000000008b832000) (0MB)
    [ 0.000000] efi: mem207: type=3, attr=0xf, range=[0x000000008b832000-0x000000008b833000) (0MB)
    [ 0.000000] efi: mem208: type=4, attr=0xf, range=[0x000000008b833000-0x000000008b837000) (0MB)
    [ 0.000000] efi: mem209: type=3, attr=0xf, range=[0x000000008b837000-0x000000008b839000) (0MB)
    [ 0.000000] efi: mem210: type=4, attr=0xf, range=[0x000000008b839000-0x000000008b83b000) (0MB)
    [ 0.000000] efi: mem211: type=2, attr=0xf, range=[0x000000008b83b000-0x000000008b83c000) (0MB)
    [ 0.000000] efi: mem212: type=4, attr=0xf, range=[0x000000008b83c000-0x000000008b83d000) (0MB)
    [ 0.000000] efi: mem213: type=3, attr=0xf, range=[0x000000008b83d000-0x000000008b83e000) (0MB)
    [ 0.000000] efi: mem214: type=4, attr=0xf, range=[0x000000008b83e000-0x000000008b841000) (0MB)
    [ 0.000000] efi: mem215: type=3, attr=0xf, range=[0x000000008b841000-0x000000008b842000) (0MB)
    [ 0.000000] efi: mem216: type=4, attr=0xf, range=[0x000000008b842000-0x000000008b859000) (0MB)
    [ 0.000000] efi: mem217: type=3, attr=0xf, range=[0x000000008b859000-0x000000008b85e000) (0MB)
    [ 0.000000] efi: mem218: type=4, attr=0xf, range=[0x000000008b85e000-0x000000008b863000) (0MB)
    [ 0.000000] efi: mem219: type=2, attr=0xf, range=[0x000000008b863000-0x000000008b864000) (0MB)
    [ 0.000000] efi: mem220: type=4, attr=0xf, range=[0x000000008b864000-0x000000008b8bf000) (0MB)
    [ 0.000000] efi: mem221: type=3, attr=0xf, range=[0x000000008b8bf000-0x000000008b8d1000) (0MB)
    [ 0.000000] efi: mem222: type=4, attr=0xf, range=[0x000000008b8d1000-0x000000008b8ec000) (0MB)
    [ 0.000000] efi: mem223: type=3, attr=0xf, range=[0x000000008b8ec000-0x000000008b8ef000) (0MB)
    [ 0.000000] efi: mem224: type=4, attr=0xf, range=[0x000000008b8ef000-0x000000008b91b000) (0MB)
    [ 0.000000] efi: mem225: type=3, attr=0xf, range=[0x000000008b91b000-0x000000008b92f000) (0MB)
    [ 0.000000] efi: mem226: type=4, attr=0xf, range=[0x000000008b92f000-0x000000008b930000) (0MB)
    [ 0.000000] efi: mem227: type=2, attr=0xf, range=[0x000000008b930000-0x000000008b931000) (0MB)
    [ 0.000000] efi: mem228: type=4, attr=0xf, range=[0x000000008b931000-0x000000008b94d000) (0MB)
    [ 0.000000] efi: mem229: type=3, attr=0xf, range=[0x000000008b94d000-0x000000008b952000) (0MB)
    [ 0.000000] efi: mem230: type=4, attr=0xf, range=[0x000000008b952000-0x000000008b958000) (0MB)
    [ 0.000000] efi: mem231: type=2, attr=0xf, range=[0x000000008b958000-0x000000008b959000) (0MB)
    [ 0.000000] efi: mem232: type=4, attr=0xf, range=[0x000000008b959000-0x000000008b95a000) (0MB)
    [ 0.000000] efi: mem233: type=3, attr=0xf, range=[0x000000008b95a000-0x000000008b95b000) (0MB)
    [ 0.000000] efi: mem234: type=4, attr=0xf, range=[0x000000008b95b000-0x000000008b95c000) (0MB)
    [ 0.000000] efi: mem235: type=3, attr=0xf, range=[0x000000008b95c000-0x000000008b95d000) (0MB)
    [ 0.000000] efi: mem236: type=4, attr=0xf, range=[0x000000008b95d000-0x000000008b970000) (0MB)
    [ 0.000000] efi: mem237: type=3, attr=0xf, range=[0x000000008b970000-0x000000008b975000) (0MB)
    [ 0.000000] efi: mem238: type=4, attr=0xf, range=[0x000000008b975000-0x000000008b976000) (0MB)
    [ 0.000000] efi: mem239: type=3, attr=0xf, range=[0x000000008b976000-0x000000008b979000) (0MB)
    [ 0.000000] efi: mem240: type=4, attr=0xf, range=[0x000000008b979000-0x000000008b97a000) (0MB)
    [ 0.000000] efi: mem241: type=3, attr=0xf, range=[0x000000008b97a000-0x000000008b98b000) (0MB)
    [ 0.000000] efi: mem242: type=4, attr=0xf, range=[0x000000008b98b000-0x000000008b98e000) (0MB)
    [ 0.000000] efi: mem243: type=3, attr=0xf, range=[0x000000008b98e000-0x000000008b99a000) (0MB)
    [ 0.000000] efi: mem244: type=2, attr=0xf, range=[0x000000008b99a000-0x000000008b99b000) (0MB)
    [ 0.000000] efi: mem245: type=4, attr=0xf, range=[0x000000008b99b000-0x000000008b99c000) (0MB)
    [ 0.000000] efi: mem246: type=3, attr=0xf, range=[0x000000008b99c000-0x000000008b99d000) (0MB)
    [ 0.000000] efi: mem247: type=2, attr=0xf, range=[0x000000008b99d000-0x000000008b99e000) (0MB)
    [ 0.000000] efi: mem248: type=4, attr=0xf, range=[0x000000008b99e000-0x000000008b99f000) (0MB)
    [ 0.000000] efi: mem249: type=3, attr=0xf, range=[0x000000008b99f000-0x000000008b9a2000) (0MB)
    [ 0.000000] efi: mem250: type=4, attr=0xf, range=[0x000000008b9a2000-0x000000008b9a3000) (0MB)
    [ 0.000000] efi: mem251: type=3, attr=0xf, range=[0x000000008b9a3000-0x000000008b9a5000) (0MB)
    [ 0.000000] efi: mem252: type=2, attr=0xf, range=[0x000000008b9a5000-0x000000008b9a6000) (0MB)
    [ 0.000000] efi: mem253: type=4, attr=0xf, range=[0x000000008b9a6000-0x000000008b9a7000) (0MB)
    [ 0.000000] efi: mem254: type=3, attr=0xf, range=[0x000000008b9a7000-0x000000008b9a8000) (0MB)
    [ 0.000000] efi: mem255: type=4, attr=0xf, range=[0x000000008b9a8000-0x000000008bdc9000) (4MB)
    [ 0.000000] efi: mem256: type=3, attr=0xf, range=[0x000000008bdc9000-0x000000008bdce000) (0MB)
    [ 0.000000] efi: mem257: type=4, attr=0xf, range=[0x000000008bdce000-0x000000008be56000) (0MB)
    [ 0.000000] efi: mem258: type=3, attr=0xf, range=[0x000000008be56000-0x000000008be5d000) (0MB)
    [ 0.000000] efi: mem259: type=4, attr=0xf, range=[0x000000008be5d000-0x000000008be5e000) (0MB)
    [ 0.000000] efi: mem260: type=2, attr=0xf, range=[0x000000008be5e000-0x000000008be5f000) (0MB)
    [ 0.000000] efi: mem261: type=3, attr=0xf, range=[0x000000008be5f000-0x000000008be60000) (0MB)
    [ 0.000000] efi: mem262: type=4, attr=0xf, range=[0x000000008be60000-0x000000008be61000) (0MB)
    [ 0.000000] efi: mem263: type=3, attr=0xf, range=[0x000000008be61000-0x000000008be66000) (0MB)
    [ 0.000000] efi: mem264: type=4, attr=0xf, range=[0x000000008be66000-0x000000008be67000) (0MB)
    [ 0.000000] efi: mem265: type=3, attr=0xf, range=[0x000000008be67000-0x000000008be68000) (0MB)
    [ 0.000000] efi: mem266: type=4, attr=0xf, range=[0x000000008be68000-0x000000008be69000) (0MB)
    [ 0.000000] efi: mem267: type=3, attr=0xf, range=[0x000000008be69000-0x000000008be6a000) (0MB)
    [ 0.000000] efi: mem268: type=4, attr=0xf, range=[0x000000008be6a000-0x000000008be6c000) (0MB)
    [ 0.000000] efi: mem269: type=3, attr=0xf, range=[0x000000008be6c000-0x000000008be6d000) (0MB)
    [ 0.000000] efi: mem270: type=4, attr=0xf, range=[0x000000008be6d000-0x000000008be92000) (0MB)
    [ 0.000000] efi: mem271: type=3, attr=0xf, range=[0x000000008be92000-0x000000008be93000) (0MB)
    [ 0.000000] efi: mem272: type=4, attr=0xf, range=[0x000000008be93000-0x000000008c358000) (4MB)
    [ 0.000000] efi: mem273: type=2, attr=0xf, range=[0x000000008c358000-0x000000008c359000) (0MB)
    [ 0.000000] efi: mem274: type=4, attr=0xf, range=[0x000000008c359000-0x000000008ccf7000) (9MB)
    [ 0.000000] efi: mem275: type=2, attr=0xf, range=[0x000000008ccf7000-0x000000008ccf8000) (0MB)
    [ 0.000000] efi: mem276: type=4, attr=0xf, range=[0x000000008ccf8000-0x000000008ccfa000) (0MB)
    [ 0.000000] efi: mem277: type=2, attr=0xf, range=[0x000000008ccfa000-0x000000008ccfb000) (0MB)
    [ 0.000000] efi: mem278: type=4, attr=0xf, range=[0x000000008ccfb000-0x000000008cd03000) (0MB)
    [ 0.000000] efi: mem279: type=7, attr=0xf, range=[0x000000008cd03000-0x000000008cd13000) (0MB)
    [ 0.000000] efi: mem280: type=10, attr=0xf, range=[0x000000008cd13000-0x000000008cd53000) (0MB)
    [ 0.000000] efi: mem281: type=7, attr=0xf, range=[0x000000008cd53000-0x000000008cd69000) (0MB)
    [ 0.000000] efi: mem282: type=9, attr=0xf, range=[0x000000008cd69000-0x000000008cd8f000) (0MB)
    [ 0.000000] efi: mem283: type=7, attr=0xf, range=[0x000000008cd8f000-0x000000008ce3b000) (0MB)
    [ 0.000000] efi: mem284: type=6, attr=0x800000000000000f, range=[0x000000008ce3b000-0x000000008ce8f000) (0MB)
    [ 0.000000] efi: mem285: type=7, attr=0xf, range=[0x000000008ce8f000-0x000000008cece000) (0MB)
    [ 0.000000] efi: mem286: type=5, attr=0x800000000000000f, range=[0x000000008cece000-0x000000008ceff000) (0MB)
    [ 0.000000] efi: mem287: type=7, attr=0xf, range=[0x000000008ceff000-0x000000008cf92000) (0MB)
    [ 0.000000] efi: mem288: type=0, attr=0xf, range=[0x000000008cf92000-0x000000008cfff000) (0MB)
    [ 0.000000] efi: mem289: type=2, attr=0xf, range=[0x000000008cfff000-0x000000008d000000) (0MB)
    [ 0.000000] efi: mem290: type=7, attr=0xf, range=[0x0000000100000000-0x000000016f600000) (1782MB)
    [ 0.000000] efi: mem291: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem292: type=0, attr=0x8000000000000000, range=[0x000000008d000000-0x000000008fa00000) (42MB)
    [ 0.000000] efi: mem293: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
    [ 0.000000] efi: mem294: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem295: type=11, attr=0x8000000000000000, range=[0x00000000ffe70000-0x00000000ffea0000) (0MB)
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: Apple Inc. MacBookPro9,1/Mac-4B7AC7E43945597E, BIOS MBP91.88Z.00D3.B08.1208081132 08/08/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x16f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable
    [ 0.000000] 2 base 090000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 08E000000 mask FFE000000 uncachable
    [ 0.000000] 4 base 08D000000 mask FFF000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x8d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
    [ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
    [ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x16f400000-0x16f5fffff]
    [ 0.000000] [mem 0x16f400000-0x16f5fffff] page 2M
    [ 0.000000] BRK [0x02b35000, 0x02b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x16c000000-0x16f3fffff]
    [ 0.000000] [mem 0x16c000000-0x16f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x16bffffff]
    [ 0.000000] [mem 0x100000000-0x16bffffff] page 2M
    [ 0.000000] BRK [0x02b36000, 0x02b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x02b37000, 0x02b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x8cd12fff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x8cbfffff] page 2M
    [ 0.000000] [mem 0x8cc00000-0x8cd12fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cd53000-0x8cd68fff]
    [ 0.000000] [mem 0x8cd53000-0x8cd68fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cd8f000-0x8ce3afff]
    [ 0.000000] [mem 0x8cd8f000-0x8ce3afff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8ce8f000-0x8cecdfff]
    [ 0.000000] [mem 0x8ce8f000-0x8cecdfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8ceff000-0x8cf91fff]
    [ 0.000000] [mem 0x8ceff000-0x8cf91fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cfff000-0x8cffffff]
    [ 0.000000] [mem 0x8cfff000-0x8cffffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7fcd7000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 000000008cd8e014 00024 (v02 APPLE )
    [ 0.000000] ACPI: XSDT 000000008cd8e1c0 000B4 (v01 APPLE Apple00 00000000 01000013)
    [ 0.000000] ACPI: FACP 000000008cd8c000 000F4 (v04 APPLE Apple00 00000000 Loki 0000005F)
    [ 0.000000] ACPI: DSDT 000000008cd82000 04D53 (v01 APPLE MacBookP 00090001 INTL 20100915)
    [ 0.000000] ACPI: FACS 000000008cd1e000 00040
    [ 0.000000] ACPI: HPET 000000008cd8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: APIC 000000008cd8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SBST 000000008cd88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ECDT 000000008cd87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SSDT 000000008cd7f000 002E0 (v01 APPLE SataAhci 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd7e000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd79000 00D20 (v01 APPLE UsbPpt 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd75000 00032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6e000 013D8 (v01 APPLE TbtPEG11 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6d000 00615 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6c000 00B3D (v01 PmRef CpuPm 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6b000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6a000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
    [ 0.000000] ACPI: DMAR 000000008cd69000 00088 (v01 APPLE IVB 00000001 AAPL 00000001)
    [ 0.000000] ACPI: MCFG 000000008cd89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16f5fffff]
    [ 0.000000] NODE_DATA [mem 0x16f5f7000-0x16f5fbfff]
    [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff88016ac00000-ffff88016ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x16f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008dfff]
    [ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x8cd12fff]
    [ 0.000000] node 0: [mem 0x8cd53000-0x8cd68fff]
    [ 0.000000] node 0: [mem 0x8cd8f000-0x8ce3afff]
    [ 0.000000] node 0: [mem 0x8ce8f000-0x8cecdfff]
    [ 0.000000] node 0: [mem 0x8ceff000-0x8cf91fff]
    [ 0.000000] node 0: [mem 0x8cfff000-0x8cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x16f5fffff]
    [ 0.000000] On node 0 totalpages: 1032772
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 26 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8947 pages used for memmap
    [ 0.000000] DMA32 zone: 572583 pages, LIFO batch:31
    [ 0.000000] Normal zone: 7128 pages used for memmap
    [ 0.000000] Normal zone: 456192 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8970c000-0x8970cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x89721000-0x89721fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cd13000-0x8cd52fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cd69000-0x8cd8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8ce3b000-0x8ce8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cece000-0x8cefefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cf92000-0x8cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8d000000-0x8f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffea0000-0xffffffff]
    [ 0.000000] e820: [mem 0x8fa00000-0xe00f7fff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88016f200000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016607
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3935088K/4131088K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 196000K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2294.978 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.20 BogoMIPS (lpj=7649926)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000032] init_memory_mapping: [mem 0x8ce3b000-0x8ce8efff]
    [ 0.000034] [mem 0x8ce3b000-0x8ce8efff] page 4k
    [ 0.000045] init_memory_mapping: [mem 0x8cece000-0x8cefefff]
    [ 0.000046] [mem 0x8cece000-0x8cefefff] page 4k
    [ 0.000086] init_memory_mapping: [mem 0x8d000000-0x8f9fffff]
    [ 0.000087] [mem 0x8d000000-0x8f9fffff] page 2M
    [ 0.026158] Security Framework initialized
    [ 0.026166] AppArmor: AppArmor disabled by boot time parameter
    [ 0.026167] Yama: becoming mindful.
    [ 0.026441] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.027488] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.027952] Mount-cache hash table entries: 256
    [ 0.028114] Initializing cgroup subsys memory
    [ 0.028122] Initializing cgroup subsys devices
    [ 0.028124] Initializing cgroup subsys freezer
    [ 0.028125] Initializing cgroup subsys net_cls
    [ 0.028127] Initializing cgroup subsys blkio
    [ 0.028148] CPU: Physical Processor ID: 0
    [ 0.028149] CPU: Processor Core ID: 0
    [ 0.028538] mce: CPU supports 9 MCE banks
    [ 0.028551] CPU0: Thermal monitoring enabled (TM1)
    [ 0.028560] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 1
    [ 0.028670] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.029671] ACPI: Core revision 20130725
    [ 0.036004] ACPI: All ACPI Tables successfully acquired
    [ 0.037838] ftrace: allocating 20318 entries in 80 pages
    [ 0.047613] dmar: Host address width 36
    [ 0.047615] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.047621] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.047622] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.047627] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.047628] dmar: RMRR base: 0x0000008d800000 end: 0x0000008f9fffff
    [ 0.047699] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.047700] HPET id 0 under DRHD base 0xfed91000
    [ 0.047701] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
    [ 0.047705] Not enable interrupt remapping
    [ 0.047706] Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
    [ 0.048157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.081147] smpboot: CPU0: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.081154] TSC deadline timer enabled
    [ 0.081162] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.081169] ... version: 3
    [ 0.081170] ... bit width: 48
    [ 0.081171] ... generic registers: 4
    [ 0.081171] ... value mask: 0000ffffffffffff
    [ 0.081172] ... max period: 0000ffffffffffff
    [ 0.081173] ... fixed-purpose events: 3
    [ 0.081174] ... event mask: 000000070000000f
    [ 0.118277] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.104573] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.240347] Brought up 8 CPUs
    [ 0.240351] smpboot: Total of 8 processors activated (36734.63 BogoMIPS)
    [ 0.247904] devtmpfs: initialized
    [ 0.250380] PM: Registering ACPI NVS region [mem 0x8cd13000-0x8cd52fff] (262144 bytes)
    [ 0.251164] RTC time: 7:32:07, date: 01/09/14
    [ 0.251202] NET: Registered protocol family 16
    [ 0.251294] cpuidle: using governor ladder
    [ 0.251296] cpuidle: using governor menu
    [ 0.251322] ACPI: bus type PCI registered
    [ 0.251324] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.251381] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
    [ 0.251384] PCI: not using MMCONFIG
    [ 0.251385] PCI: Using configuration type 1 for base access
    [ 0.251999] bio: create slab <bio-0> at 0
    [ 0.252116] ACPI: Added _OSI(Module Device)
    [ 0.252117] ACPI: Added _OSI(Processor Device)
    [ 0.252118] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.252119] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.253362] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.257523] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 2.254668] ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20130725/evregion-287)
    [ 2.254672] ACPI Error: Method parse/execution failed [\_SB_.PCI0.ZYXW] (Node ffff880169288708), AE_ERROR (20130725/psparse-536)
    [ 2.254677] ACPI Error: Method parse/execution failed [\_SB_._INI] (Node ffff880169253fa0), AE_ERROR (20130725/psparse-536)
    [ 2.255095] ACPI: SSDT 000000008cd19190 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    [ 2.255414] ACPI: Dynamic OEM Table Load:
    [ 2.255416] ACPI: SSDT (null) 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    [ 2.268225] ACPI: SSDT 000000008cd1a710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    [ 2.268583] ACPI: Dynamic OEM Table Load:
    [ 2.268585] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    [ 2.281264] ACPI: SSDT 000000008cd18d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    [ 2.281581] ACPI: Dynamic OEM Table Load:
    [ 2.281583] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    [ 2.295568] ACPI: Interpreter enabled
    [ 2.295575] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 2.295579] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 2.295592] ACPI: (supports S0 S3 S4 S5)
    [ 2.295593] ACPI: Using IOAPIC for interrupt routing
    [ 2.295614] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
    [ 2.295963] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
    [ 2.319936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.320064] ACPI: No dock devices found.
    [ 2.328628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 2.328727] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 2.328815] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    [ 2.329006] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
    [ 2.329109] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 2.329127] PCI host bridge to bus 0000:00
    [ 2.329129] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 2.329131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.329133] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.329135] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.329136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 2.329138] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 2.329139] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 2.329141] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 2.329142] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 2.329144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 2.329145] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 2.329147] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 2.329148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 2.329150] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 2.329151] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 2.329153] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 2.329154] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 2.329156] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
    [ 2.329157] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 2.329165] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 2.329244] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 2.329277] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.329309] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 2.329346] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
    [ 2.329425] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
    [ 2.329464] pci 0000:00:01.1: System wakeup disabled by ACPI
    [ 2.329498] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 2.329509] pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
    [ 2.329516] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 2.329521] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [ 2.329611] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 2.329633] pci 0000:00:14.0: reg 0x10: [mem 0xc1c00000-0xc1c0ffff 64bit]
    [ 2.329696] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.329729] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.329765] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 2.329790] pci 0000:00:16.0: reg 0x10: [mem 0xc1c17100-0xc1c1710f 64bit]
    [ 2.329869] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.329945] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 2.329968] pci 0000:00:1a.0: reg 0x10: [mem 0xc1c16c00-0xc1c16fff]
    [ 2.330059] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.330095] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.330130] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 2.330143] pci 0000:00:1b.0: reg 0x10: [mem 0xc1c10000-0xc1c13fff 64bit]
    [ 2.330205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.330240] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 2.330273] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 2.330352] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.330391] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 2.330423] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 2.330502] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 2.330540] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 2.330572] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 2.330653] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 2.330690] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 2.330733] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 2.330755] pci 0000:00:1d.0: reg 0x10: [mem 0xc1c16800-0xc1c16bff]
    [ 2.330846] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.330882] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.330917] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 2.331082] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 2.331102] pci 0000:00:1f.2: reg 0x10: [io 0x3098-0x309f]
    [ 2.331111] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
    [ 2.331120] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
    [ 2.331129] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
    [ 2.331137] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [ 2.331145] pci 0000:00:1f.2: reg 0x24: [mem 0xc1c16000-0xc1c167ff]
    [ 2.331192] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.331255] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 2.331269] pci 0000:00:1f.3: reg 0x10: [mem 0xc1c17000-0xc1c170ff 64bit]
    [ 2.331285] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 2.331414] pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
    [ 2.331425] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
    [ 2.331436] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
    [ 2.331447] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
    [ 2.331455] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
    [ 2.331463] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
    [ 2.331519] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 2.331560] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
    [ 2.331569] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
    [ 3.338172] pci 0000:00:01.0: ASPM: Could not configure common clock
    [ 3.338218] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 3.338221] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 3.338223] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
    [ 3.338227] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
    [ 3.338301] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
    [ 3.338304] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
    [ 3.338308] pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xcdffffff]
    [ 3.338314] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
    [ 3.338460] pci 0000:02:00.0: [14e4:16b4] type 00 class 0x020000
    [ 3.338493] pci 0000:02:00.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit pref]
    [ 3.338518] pci 0000:02:00.0: reg 0x18: [mem 0xc1810000-0xc181ffff 64bit pref]
    [ 3.338668] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 3.338738] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 3.338824] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
    [ 3.338861] pci 0000:02:00.1: reg 0x10: [mem 0xc1820000-0xc182ffff 64bit pref]
    [ 3.339051] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
    [ 3.339096] pci 0000:02:00.1: System wakeup disabled by ACPI
    [ 3.344942] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 3.344949] pci 0000:00:1c.0: bridge window [mem 0xc1b00000-0xc1bfffff]
    [ 3.344955] pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
    [ 3.345076] pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000
    [ 3.345105] pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a03fff 64bit]
    [ 3.345247] pci 0000:03:00.0: supports D1 D2
    [ 3.345286] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 3.351561] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 3.351568] pci 0000:00:1c.1: bridge window [mem 0xc1a00000-0xc1afffff]
    [ 3.351673] pci 0000:04:00.0: [11c1:5901] type 00 class 0x0c0010
    [ 3.351712] pci 0000:04:00.0: reg 0x10: [mem 0xc1900000-0xc1900fff 64bit]
    [ 3.351903] pci 0000:04:00.0: supports D1 D2
    [ 3.351904] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 3.358214] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 3.358221] pci 0000:00:1c.2: bridge window [mem 0xc1900000-0xc19fffff]
    [ 3.358742] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358790] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 3.358836] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358883] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 3.358929] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358973] ACPI: PCI Interrupt L

    I did read that report initially; I ended up just removing bluez and bluez-utils since I don't care that much about using those peripherals. I imagine that if I downgraded the kernel I might be able to run bluez and get the trackpad to work. I think I'd rather keep my copy of the kernel up-to-date at this point since I don't really care that much about using that trackpad. Thanks for the suggestion, though—if I decide I really do want to use it I'll downgrade and see if that helps.
    The problems with running programs seem to have fixed themselves semi-mysteriously. That problem was persisting through reboots initially. I looked at the running processes and saw that the programs I had tried to open were actually running, but KDE wasn't behaving as such. I tried rebooting and using startx to see if I could see those programs running there, which I could. After that KDE behaved properly.
    It seems like HFS support for fsck is poorly if at all supported outside of Mac OS, so I booted into Mac OS and ran fsck_hfs on my media partition. This worked, and I can read and write from it again.
    EDIT: In case anyone is curious, there seems to be a fix pending for the trackpad issues—see here and here.
    Last edited by tenfoxes (2014-01-09 20:42:45)

  • [SOLVED] Openbox autostart no longer working since upgrade

    After the upgrade on May 14 2013 my autostart file no longer works. I tried renaming my autostart.sh to just autostart no luck. There is nothing wrong with the autostart file as I can run it manually and it will load all my apps. Also, if I cd to  /usr/lib/openbox/ and run openbox-autostart directly it works. Here are the updated packages:
    [2013-05-14 21:34] [PACMAN] upgraded ethtool (1:3.8-1 -> 1:3.9-1)
    [2013-05-14 21:34] [PACMAN] upgraded firefox (20.0.1-5 -> 21.0-1)
    [2013-05-14 21:34] [PACMAN] upgraded gsettings-desktop-schemas (3.8.0-1 -> 3.8.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded glib-networking (2.36.1-1 -> 2.36.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-2 -> 3.8.2.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme (3.8.0-1 -> 3.8.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded gnupg (2.0.19-7 -> 2.0.20-1)
    [2013-05-14 21:34] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
    [2013-05-14 21:34] [PACMAN] upgraded gvfs (1.16.1-2 -> 1.16.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
    [2013-05-14 21:34] [PACMAN] upgraded mplayer (35920-2 -> 35920-3)
    [2013-05-14 21:34] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
    [2013-05-14 21:34] [PACMAN] upgraded pango (1.34.0-1 -> 1.34.1-1)
    [2013-05-14 21:34] [PACMAN] upgraded pdnsd (1.2.9.a-1 -> 1.2.9.a-2)
    [2013-05-14 21:34] [PACMAN] upgraded python2-distribute (0.6.38-1 -> 0.6.39-1)
    [2013-05-14 21:34] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
    [2013-05-14 21:34] [PACMAN] upgraded sudo (1.8.6.p8-1 -> 1.8.6.p8-2)
    [2013-05-14 21:34] [PACMAN] upgraded thunderbird (17.0.5-2 -> 17.0.6-1)
    [2013-05-14 21:34] [PACMAN] upgraded virtualbox (4.2.12-2 -> 4.2.12-3)
    [2013-05-14 21:34] [PACMAN] upgraded vte-common (0.34.4-1 -> 0.34.5-1)
    [2013-05-14 21:35] [PACMAN] upgraded python3-threaded_servers (2013.5.12.3-1 -> 2013.5.14.1-1)
    Not sure what's going on or what could have caused it. My .xinitrc looks like this:
    #!/bin/sh
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    export BROWSER="chromium"
    # Start GNOME Keyring
    eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
    # You probably need to do this too:
    export SSH_AUTH_SOCK
    export GPG_AGENT_INFO
    export GNOME_KEYRING_CONTROL
    export GNOME_KEYRING_PID
    exec openbox-session
    My .zprofile
    [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && startx &> ~/.xlog
    My systemd startup service:
    # This file is part of systemd.
    # systemd is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2.1 of the License, or
    # (at your option) any later version.
    [Unit]
    Description=Getty on %I
    Documentation=man:agetty(8) man:systemd-getty-generator(8)
    Documentation=http://0pointer.de/blog/projects/serial-console.html
    After=systemd-user-sessions.service plymouth-quit-wait.service
    After=rc-local.service
    # If additional gettys are spawned during boot then we should make
    # sure that this is synchronized before getty.target, even though
    # getty.target didn't actually pull it in.
    Before=getty.target
    IgnoreOnIsolate=yes
    # On systems without virtual consoles, don't start any getty. (Note
    # that serial gettys are covered by [email protected], not this
    # unit
    ConditionPathExists=/dev/tty0
    [Service]
    # the VT is cleared by TTYVTDisallocate
    ExecStart=-/sbin/agetty -a dodo3773 %I 38400
    Type=simple
    #Restart=always
    #RestartSec=0
    UtmpIdentifier=%I
    TTYPath=/dev/%I
    TTYReset=no
    TTYVHangup=no
    TTYVTDisallocate=no
    KillMode=process
    IgnoreSIGPIPE=no
    # Unset locale for the console getty since the console has problems
    # displaying some internationalized messages.
    Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
    # Some login implementations ignore SIGTERM, so we send SIGHUP
    # instead, to ensure that login terminates cleanly.
    KillSignal=SIGHUP
    [Install]
    WantedBy=getty.target
    Edit: I tried switching to bash in a tty and then just startx but that doesn't help either.
    Edit2: To be clear openbox does load a desktop. The autostart scripts at ~/.config/openbox/ just don't run. Thanks.
    Edit3: I decided to run the command issued in openbox-session and added --debug to it. Here is the output of "xinit /usr/bin/openbox --debug --startup "/usr/lib/openbox/openbox-autostart OPENBOX" "$@" -- :1 -nolisten tcp" :
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.8.7-1-ARCH x86_64
    Current Operating System: Linux dodo713 3.9.2-2-ck #1 SMP PREEMPT Sun May 12 18:19:49 EDT 2013 x86_64
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=06874255-7a5d-4968-8f09-1e53cb761f44 ro quiet init=/usr/lib/systemd/systemd
    Build Date: 17 April 2013 02:37:06PM
    Current version of pixman: 0.30.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.1.log", Time: Fri May 17 08:14:11 2013
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    setversion 1.4 failed
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Loading extension NV-GLX
    Loading extension NV-CONTROL
    Loading extension XINERAMA
    setversion 1.4 failed
    Openbox-Debug: --startup /usr/lib/openbox/openbox-autostart OPENBOX
    Openbox-Debug: Moving to desktop 1
    Openbox-Debug: not managing override redirect window 0x4000bb
    which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
    which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
    which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
    kupfer: Reading from stdin
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Openbox-Debug: Caught signal 22. Ignoring.
    Openbox-Debug: UPDATE DESKTOP NAMES
    Openbox-Debug: Keyboard map changed. Reloading keyboard bindings.
    Edit4: Removed everything from /etc/xdg/autostart and ~/.config/autostart/ directories. That didn't work.
    Edit5: Tried installing xorg-xsetroot to let openbox set the color of the wallpaper. That didn't work.
    Edit6: Checked the output of "loginctl show-session $XDG_SESSION_ID" to make sure that wasn't the issue. Looks okay to me:
    Id=1
    Timestamp=Fri 2013-05-17 10:25:53 PDT
    TimestampMonotonic=13650783
    DefaultControlGroup=systemd:/user/1000.user/1.session
    VTNr=1
    TTY=tty1
    Remote=no
    Service=login
    Leader=405
    Audit=1
    Type=tty
    Class=user
    Active=yes
    State=active
    KillProcesses=no
    IdleHint=no
    IdleSinceHint=1368811547544203
    IdleSinceHintMonotonic=7545641
    Name=dodo3773
    Edit7: Tried installing xorg-xrdb thinking maybe that would help and did todays updates. No luck yet.
    Edit8: Kupfer still loads even though nothing else does. So I uninstalled kupfer. Same thing though. No autostart.
    Edit9: Tried booting into repo kernel instead of ck kernel. Didn't work.
    Last edited by dodo3773 (2013-05-19 06:34:44)

    WonderWoofy wrote:Interestingly, of all those things you included in your post, you forgot to include the autostart script itself.  What does that look like?
    Well, since it worked fine even when called indirectly through openbox-autostart and since it's worked fine for months I figured it was fine. I am happy to post it though. Here you go:
    feh --bg-scale /home/dodo3773/Pictures/blacksolid.png &
    xfce4-panel &
    numlockx &
    keepassx -lock &
    kupfer --no-splash &
    ~/Documents/Scripts/startupopen.sh &
    sleep 30 && sudo /usr/bin/ntpd -qg &
    sudo /usr/sbin/ethtool -K eth0 rx off &
    ~/Documents/Scripts/conky.sh &
    sudo /home/dodo3773/Documents/Scripts/temp_throttlenew > /dev/null 2>&1 &
    Here are the external scripts that are called (startupopen.sh and temp_throttlenew):
    startupopen.sh
    #! /bin/bash
    sleep 13
    chromium &
    thunderbird &
    sleep 20
    devilspie -a &
    sleep 7
    pkill devilspie &
    exit
    temp_throttlenew
    #!/bin/bash
    # temp_throttle.sh max_temp
    # USE CELSIUS TEMPERATURES.
    if [[ $EUID -ne 0 ]]; then
    echo "This script must be run as root" 1>&2
    exit 1
    fi
    #if [ $# -ne 1 ]; then
    # If temperature wasn't given, then print a message and exit.
    # echo "Please supply a maximum desired temperature in Celsius." 1>&2
    # echo "For example: ${0} 60" 1>&2
    # exit 2
    #else
    #Set the first argument as the maximum desired temperature.
    MAX_TEMP=85
    #fi
    # The frequency will increase when low temperature is reached.
    let LOW_TEMP=$MAX_TEMP-5
    CORES=$(nproc) # Get number of CPU cores.
    echo -e "Number of CPU cores detected: $CORES\n"
    # Temperatures internally are calculated to the thousandth.
    MAX_TEMP=${MAX_TEMP}000
    LOW_TEMP=${LOW_TEMP}000
    # FREQ_LIST is a list (array) of all available cpu frequencies the system allows.
    declare -a FREQ_LIST=($(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies))
    # CURRENT_FREQ relates to the FREQ_LIST by keeping record of the currently set frequency.
    let CURRENT_FREQ=1
    function set_freq {
    echo ${FREQ_LIST[$1]}
    cpupower frequency-set -g "ondemand" -d "800MHz" -u ${FREQ_LIST[$1]}
    function throttle {
    if [ $CURRENT_FREQ -ne $((${#FREQ_LIST[@]}-1)) ]; then
    let CURRENT_FREQ+=1
    echo -n "throttle "
    set_freq $CURRENT_FREQ
    fi
    function unthrottle {
    if [ $CURRENT_FREQ -ne 0 ]; then
    let CURRENT_FREQ-=1
    echo -n "unthrottle "
    set_freq $CURRENT_FREQ
    fi
    function get_temp {
    # Get the system temperature.
    # If one of these doesn't work, the try uncommenting another.
    TEMP=$(cat /sys/class/thermal/thermal_zone0/temp)
    #TEMP=$(cat /sys/class/hwmon/hwmon0/temp1_input)
    #TEMP=$(cat /sys/class/hwmon/hwmon1/device/temp1_input)
    while true; do
    get_temp
    if [ $TEMP -gt $MAX_TEMP ]; then # Throttle if too hot.
    throttle
    elif [ $TEMP -le $LOW_TEMP ]; then # Unthrottle if cool.
    unthrottle
    fi
    sleep 3
    done
    Stuff that needs sudo is in my sudoers as "username hostname NOPASSWD: item1,item2,etc,etc". Nothing too exciting. Seems like if there was suddenly something wrong with my autostart file at least some of the stuff would run either way though cause of "&". Pretty puzzling this issue is.

  • [ SOLVED ] [ Openbox ] autostart.sh is being ignored ..

    ~/.config/openbox/autostart.sh
    # Turn On numlock
    numlockx &
    # Desktop background
    nitrogen --restore &
    # Panel
    tint2 &
    # Conky
    conky -c ~/.conkyrc
    .xinitrc
    exec ck-launch-session openbox
    start-pulseaudio-x11
    When Openbox starts, nothing happens ( none of the entries gets executed ).
    ** Works perfectly when I execute the given file from the command line ..
    How to fix it ?
    [ SOLVED ] Changed .xinitrc line from openbox to openbox-session and everything seems to be working now ..
    Last edited by Minimal Scope (2010-10-29 18:17:06)

    Sorry I'm new with linux. Thanks you for your time
    Last edited by Jeager (2010-05-16 20:40:26)

  • [Solved]Openbox: Autostart.sh doesn't work

    Hello
    I just made a fresh install of arch with openbox but I can't launch my applications at start
    xterm &
    nitrogen --restore &
    This doesn't work in ~/.config/openbox/autostart.sh neither in /etc/xdg/openbox/autostart.sh
    Can someone help me plz ?
    thanks and sorry for my bad english
    Last edited by Jeager (2010-05-16 20:48:43)

    Sorry I'm new with linux. Thanks you for your time
    Last edited by Jeager (2010-05-16 20:40:26)

  • SOLVED openbox crashes on certain programs

    I am running openbox as my desktop enviornment on my macbook. Arch Linux 64 OS.
    When I try to boot up either eboard or scid (only 2 I've had problems with so far) it starts to bring them up but then openbox dissapears and I see the terminal asking me to login for a second before it goes to my openbox login screen. Anyone know why this would happen?
    Last edited by Daphron (2010-04-08 23:51:09)

    Try starting either program from a terminal to see what errors, if any, are generated.
    Also look at strace http://www.archlinux.org/packages/extra/i686/strace/

  • [SOLVED]Openbox Autostart not Autostarting

    So I recently realized that my having openbox on both root and user were conflicting, and deleted the root files. However, now The commands in my autostart.sh fail to execute my startup programs, like conky, feh and tint2
    Here is my autostart.sh:
    # This shell script is run before Openbox launches.
    # Environment variables set here are passed to the Openbox session.
    # Set a background color
    BG=""
    if which hsetroot >/dev/null 2>&1; then
    BG=hsetroot
    else
    if which esetroot >/dev/null 2>&1; then
    BG=esetroot
    else
    if which xsetroot >/dev/null 2>&1; then
    BG=xsetroot
    fi
    fi
    fi
    test -z $BG || $BG -solid "#303030"
    # D-bus
    if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
    eval `dbus-launch --sh-syntax --exit-with-session`
    fi
    # Make GTK apps look and behave how they were set up in the gnome config tools
    #if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
    # /usr/libexec/gnome-settings-daemon &
    #elif which gnome-settings-daemon >/dev/null 2>&1; then
    # gnome-settings-daemon &
    # Make GTK apps look and behave how they were set up in the XFCE config tools
    #elif which xfce-mcs-manager >/dev/null 2>&1; then
    #xfce-mcs-manager n &
    fi
    # Preload stuff for KDE apps
    #if which start_kdeinit >/dev/null 2>&1; then
    # LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
    fi
    # Run XDG autostart things. By default don't run anything desktop-specific
    # See xdg-autostart --help more info
    #DESKTOP_ENV="OPENBOX"
    #if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
    # /usr/lib/openbox/xdg-autostart $DESKTOP_ENV
    fi
    # Run the system-wide support stuff
    . $GLOBALAUTOSTART
    # Programs to launch at startup
    #hsetroot ~/wallpaper.png &
    xcompmgr -c -t-5 -l-5 -r4.2 -o.55 &
    sh ~/.fehbg &
    xcalib /home/duke/colorprofiles/Color\ LCD-00000610-000004272300.icc &
    # SCIM support (for typing non-english characters)
    export LC_CTYPE=ja_JP.utf8
    export XMODIFIERS=@im=SCIM
    export GTK_IM_MODULE=scim
    export QT_IM_MODULE=scim
    scim -d &
    # Programs that will run after Openbox has started
    (sleep 2 && tint2) &
    ~/.scripts/conkystart.sh &
    fi
    fi
    fi
    Can someone tell me why this is occuring?
    Last edited by duke11235 (2010-10-10 17:29:31)

    I don't use openbox currently, but I believe you should still have a fresh copy of autostart.sh in /etc/xdg/openbox to start over with. If not, here is a copy of mine:
    # This shell script is run before Openbox launches.
    # Environment variables set here are passed to the Openbox session.
    # DUKE11235...THIS IS WHERE I HAD MY AUTOSTART APPS (tint2, tilda, wicd-client) LISTED :: MUNKY
    # Set a background color
    BG=""
    if which hsetroot >/dev/null 2>&1; then
    BG=hsetroot
    else
    if which esetroot >/dev/null 2>&1; then
    BG=esetroot
    else
    if which xsetroot >/dev/null 2>&1; then
    BG=xsetroot
    fi
    fi
    fi
    test -z $BG || $BG -solid "#303030"
    # D-bus
    if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
    eval `dbus-launch --sh-syntax --exit-with-session`
    fi
    # Make GTK apps look and behave how they were set up in the gnome config tools
    if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
    /usr/libexec/gnome-settings-daemon &
    elif which gnome-settings-daemon >/dev/null 2>&1; then
    gnome-settings-daemon &
    # Make GTK apps look and behave how they were set up in the XFCE config tools
    elif which xfce-mcs-manager >/dev/null 2>&1; then
    xfce-mcs-manager n &
    fi
    # Preload stuff for KDE apps
    if which start_kdeinit >/dev/null 2>&1; then
    LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
    fi
    # Run XDG autostart things. By default don't run anything desktop-specific
    # See xdg-autostart --help more info
    DESKTOP_ENV="OPENBOX"
    if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
    /usr/lib/openbox/xdg-autostart $DESKTOP_ENV
    fi
    I hope this is useful,
    Munky

  • [SOLVED] No sound in some programs

    Recently, I don't know when or what has changed, I lost sound in a few programs.
    For example:
    Sound working in
    speaker-test -c 2
    mplayer
    mumble
    luakit
    not working
    chromium
    firefox
    warsow
    mpv
    So I started reading https://wiki.archlinux.org/index.php/Ad … m_problems and the mpv.conf ao=alsa fixed it for mpv. But there's nothing else there..
    And after searching the web for answers I tried figuring out what to put in my ~/.asoundrc or /etc/modprobe.d/alsa-base.conf ( I have never had anything in these files before when it was working but apparently this is what people use )
    $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: MID [HDA Intel MID], device 0: VT1708S Analog [VT1708S Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: MID [HDA Intel MID], device 3: VT1708S Digital [VT1708S Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    $ lspci -nn | grep -i audio
    00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
    01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series] [1002:aa58]
    What am I supposed to put in my ~/.asoundrc and/or /etc/modprobe.d/alsa-base.conf?
    I've tried a lot of combinations tonight but none that resulted in sound in all programs
    Last edited by rulex (2014-09-11 16:07:02)

    Yes, pulseaudio was installed and running... sound is now back everywhere after pacman -R pulseaudio and rebooting.
    Why was it installed though? There were only optional dependencies for it when uninstalling.
    $ cat /var/log/pacman.log
    [2014-09-09 17:46] [PACMAN] Running 'pacman -Syu'
    [2014-09-09 17:46] [PACMAN] synchronizing package lists
    [2014-09-09 17:46] [PACMAN] starting full system upgrade
    [2014-09-09 17:51] [PACMAN] upgraded aurora (34.0a2+20140907+g8a9db5d-1 -> 34.0a2+20140909+gf816f7e-1)
    [2014-09-09 17:52] [PACMAN] upgraded couchdb (1.6.0-1 -> 1.6.1-1)
    [2014-09-09 17:52] [PACMAN] upgraded dirmngr (1.1.1-2 -> 1.1.1-3)
    [2014-09-09 17:52] [PACMAN] upgraded filezilla (3.9.0.3-1 -> 3.9.0.5-1)
    [2014-09-09 17:52] [PACMAN] upgraded glib2 (2.40.0-1 -> 2.40.0-2)
    [2014-09-09 17:52] [ALPM-SCRIPTLET] Please make sure JAVA_HOME is set to /usr/lib/jvm/default
    [2014-09-09 17:52] [ALPM-SCRIPTLET] If not, you may have to logout and login again to set it according to /etc/profile.d/jre.sh
    [2014-09-09 17:52] [PACMAN] upgraded java-common (1-7 -> 1-8)
    [2014-09-09 17:52] [PACMAN] upgraded libwbclient (4.1.11-1 -> 4.1.12-1)
    [2014-09-09 17:52] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-09-09 17:52] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Starting build: 3.16.2-1-ARCH
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Starting build: 3.16.2-1-ARCH
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-09-09 17:52] [PACMAN] upgraded linux (3.16.1-1 -> 3.16.2-1)
    [2014-09-09 17:52] [PACMAN] upgraded linux-headers (3.16.1-1 -> 3.16.2-1)
    [2014-09-09 17:52] [PACMAN] upgraded llvm-libs (3.4.2-1 -> 3.5.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded llvm (3.4.2-1 -> 3.5.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded mesa (10.2.7-1 -> 10.2.7-2)
    [2014-09-09 17:52] [PACMAN] installed gst-plugins-base (1.4.1-1)
    [2014-09-09 17:52] [PACMAN] installed sbc (1.2-1)
    [2014-09-09 17:52] [PACMAN] installed pulseaudio (5.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt4-gstreamer (4.7.2-1 -> 4.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt4-vlc (0.7.2-1 -> 0.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt4 (4.7.2-1 -> 4.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt5-gstreamer (4.7.2-1 -> 4.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded smbclient (4.1.11-1 -> 4.1.12-1)
    [2014-09-09 17:52] [PACMAN] upgraded samba (4.1.11-1 -> 4.1.12-1)
    [2014-09-09 17:52] [ALPM-SCRIPTLET] To start and/or enable syncthing execute the following,
    [2014-09-09 17:52] [ALPM-SCRIPTLET] replacing 'user' with your username.
    [2014-09-09 17:52] [ALPM-SCRIPTLET].
    [2014-09-09 17:52] [ALPM-SCRIPTLET] systemctl start syncthing@user
    [2014-09-09 17:52] [ALPM-SCRIPTLET] systemctl enable syncthing@user
    [2014-09-09 17:52] [PACMAN] upgraded syncthing (0.9.11-1 -> 0.9.13-1)
    [2014-09-09 17:52] [PACMAN] upgraded tzdata (2014f-1 -> 2014g-1)
    [2014-09-09 17:52] [PACMAN] upgraded upower (0.99.0-2 -> 0.99.0-3)

  • [solved] Openbox autostarting ncmpcpp in lxterminal on desktop2

    Hi!
    I wondered how to get this working...
    What I want: I want openbox to open an lxterminal with ncmpcpp running on desktop2
    What I tried so far:
    Editing .config/openbox/rc.xml
    <application name="ncmpcpp">
    <desktop>2</desktop>
    </application>
    and then I put lxterminal -e ncmpcpp & in my autostart.sh
    Clearly this did not work, since autostart starts lxterminal and not ncmpcpp.
    Ok, so I tried to see if the <application> settings in rc.xml can be fooled by:
    - ln -s lxterminal terminalncmpcpp
    <application name="terminalncmpcpp">
    <desktop>2</desktop>
    </application>
    and putting terminalncmpcpp -e ncmpcpp & in the autostart.sh
    Sadly this didn't work too.
    Is there a way to get this to work?
    Thanks,
    zip1100
    Last edited by zip1100 (2010-09-04 18:15:45)

    ctrl wrote: Maybe you can change the name of a specific lxterminal (i.e. with urxvt: "urxvt -name myterm").
    That did the trick for me. Unfortunately not with lxtermial (it looks like it has no -name parameter)  but with urxvt.
    Thanks!

  • [SOLVED] Allow to run some programs in sudo witout password

    Hello!
    The problem i have is due to some commands I wish to run without having to write the password every time, as hibernate-ram, poweroff, or a custom script to change the brightness (I use a Samsung R530, and the fn keys don't work by themselves). I googled the problem, and did as it is said on the sudoers file (using visudo), but even if i think the syntax is correct, there are not any changes; it continues asking me for password. How can I fix that?
    I include a copy of my sudoers file, maybe my lack of experience with sudo don't allow me to see a syntax error.
    # This is /etc/sudoers file.
    # This file MUST be edited with the 'visudo' command as root.
    # Failure to use 'visudo' may result in syntax or file permission errors
    # that prevent sudo from running.
    # See the sudoers man page for the details on how to write a sudoers file.
    # Root is allowed to run all commands:
    root    ALL=(ALL) ALL
    alvarez ALL=(ALL) ALL
    alvarez ALL =(root) NOPASSWD: /usr/bin/controlbrillo
    # Allow members of group wheel to run all commands:
    %wheel    ALL=(ALL) ALL
    # Allow members of group power to shutdown and reboot the computer:
    %power ALL = NOPASSWD: /sbin/shutdown,/sbin/halt,/sbin/reboot
    # Allow members of group power to use hibernate and suspend:
    %power ALL = NOPASSWD: /usr/sbin/pm-hibernate,/usr/sbin/pm-suspend
    # Allow members of group power to change CPU frequenzy scaling governor:
    %power ALL = NOPASSWD: /usr/bin/cpufreq-set
    # Allow members of group network to use wvdial for call-up network connection:
    %network ALL = NOPASSWD: /usr/bin/wvdial,/usr/bin/killall wvdial,/usr/bin/poff
    # Allow members of group video to change screen settings catalyst driver:
    %video ALL = NOPASSWD: /usr/bin/amdcccle
    Thanks in advance
    Last edited by vladimir_1922 (2011-10-19 23:13:45)

    Here's what I use (single user mode), which is a little different than yours, OP:
    root ALL=(ALL) ALL
    dspider ALL=(ALL) ALL
    dspider ALL=NOPASSWD: /bin/mount, /bin/umount
    dspider arch=NOPASSWD: /sbin/reboot, /sbin/poweroff
    I'm guessing instead of "/sbin/poweroff" you could add your own command/script (path included).
    "dspider@arch" -- obviously replace the user and hostname accordingly... Probably something like this:
    alvarez your_hostname=NOPASSWD: /usr/bin/controlbrillo
    Hope this helps.
    Last edited by DSpider (2011-10-18 22:34:54)

  • [Solved] Some programs hang/don't work after upgrade

    Hi all,
    I searched and read things but couldn't find anything on this.
    About a week ago I ran pacman -Syu and afterwards some programs stopped working the way they should.
    The two I have had the most problems with are thunar and clementine.
    Thunar takes ages to load, but when it does load it's fine. Clementine will load really quickly, but then hangs when I try to play a song. It usually never actually gets round to playing a song.
    Other programs also hang when I try to save a document/file. I think it's something to do with programs that access my various storage devices.
    When I run thunar from the terminal or try to play a song in clementine when run from the terminal, I get the following message:
    Error calling StartServiceByName for org.gtk.Private.UDisks2VolumeMonitor: Timeout was reached (g-io-error-quark, 24)
    Does anyone have any idea how I could fix this?
    Thanks for reading
    Last edited by gav989 (2013-10-20 19:13:59)

    Thanks for responding, to answer your questions in turn:
    Here is the pacman log for the update in question:
    [2013-10-13 07:20] [PACMAN] Running 'pacman -Syu'
    [2013-10-13 07:20] [PACMAN] synchronizing package lists
    [2013-10-13 07:21] [PACMAN] starting full system upgrade
    [2013-10-13 08:19] [PACMAN] removed python2-imaging (1.1.7-8)
    [2013-10-13 08:19] [PACMAN] removed bluez4 (4.101-3)
    [2013-10-13 08:19] [PACMAN] removed heirloom-mailx (12.5-3)
    [2013-10-13 08:19] [PACMAN] upgraded anki (2.0.12-1 -> 2.0.13-1)
    [2013-10-13 08:19] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    [2013-10-13 08:19] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 5 trust: 0-, 0q, 0n, 0m, 0f, 1u
    [2013-10-13 08:19] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 5 signed: 66 trust: 0-, 0q, 0n, 5m, 0f, 0u
    [2013-10-13 08:19] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 66 signed: 3 trust: 66-, 0q, 0n, 0m, 0f, 0u
    [2013-10-13 08:19] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2014-01-22
    [2013-10-13 08:19] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] ==> Importing owner trust values...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] ==> Updating trust database...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2014-01-22
    [2013-10-13 08:19] [PACMAN] upgraded archlinux-keyring (20130818-1 -> 20130926-1)
    [2013-10-13 08:19] [PACMAN] upgraded dbus (1.6.12-1 -> 1.6.14-1)
    [2013-10-13 08:19] [PACMAN] upgraded tzdata (2013d-1 -> 2013g-1)
    [2013-10-13 08:19] [ALPM-SCRIPTLET] Generating locales...
    [2013-10-13 08:19] [ALPM-SCRIPTLET] en_GB.UTF-8... done
    [2013-10-13 08:19] [ALPM-SCRIPTLET] Generation complete.
    [2013-10-13 08:19] [PACMAN] upgraded glibc (2.18-3 -> 2.18-5)
    [2013-10-13 08:19] [PACMAN] upgraded libffi (3.0.13-3 -> 3.0.13-4)
    [2013-10-13 08:19] [PACMAN] upgraded glib2 (2.36.4-1 -> 2.38.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded at-spi2-core (2.8.0-1 -> 2.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded atk (2.8.0-1 -> 2.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded at-spi2-atk (2.8.1-1 -> 2.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded dconf (0.16.1-1 -> 0.18.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded libpng (1.6.3-1 -> 1.6.5-1)
    [2013-10-13 08:19] [PACMAN] upgraded gdk-pixbuf2 (2.28.2-1 -> 2.30.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gtk-update-icon-cache (2.24.20-1 -> 2.24.22-1)
    [2013-10-13 08:19] [PACMAN] upgraded libcups (1.6.3-1 -> 1.6.4-1)
    [2013-10-13 08:19] [PACMAN] upgraded pango (1.34.1-1 -> 1.36.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded wayland (1.2.1-1 -> 1.3.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gtk3 (3.8.4-1 -> 3.10.1-1)
    [2013-10-13 08:19] [PACMAN] upgraded gsettings-desktop-schemas (3.8.2-1 -> 3.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded desktop-file-utils (0.21-1 -> 0.22-1)
    [2013-10-13 08:19] [PACMAN] upgraded baobab (3.8.2-1 -> 3.10-1)
    [2013-10-13 08:19] [PACMAN] upgraded bluez-libs (5.7-1 -> 5.9-1)
    [2013-10-13 08:19] [PACMAN] upgraded kbd (2.0.0-1 -> 2.0.0-2)
    [2013-10-13 08:19] [ALPM] warning: directory permissions differ on /var/log/journal/
    filesystem: 755 package: 2755
    [2013-10-13 08:19] [ALPM-SCRIPTLET] ==> systemd 205 restructures the cgroup hierarchy and changes internal
    [2013-10-13 08:19] [ALPM-SCRIPTLET] protocols. You should reboot at your earliest convenience.
    [2013-10-13 08:19] [ALPM-SCRIPTLET] ==> The "timestamp" hook for mkinitcpio no longer exists. If you used
    [2013-10-13 08:19] [ALPM-SCRIPTLET] this hook, you must remove it from /etc/mkinitcpio.conf. A "systemd"
    [2013-10-13 08:19] [ALPM-SCRIPTLET] hook has been added which provides this functionality, and more.
    [2013-10-13 08:19] [PACMAN] upgraded systemd (204-3 -> 208-1)
    [2013-10-13 08:19] [PACMAN] upgraded bluez-utils (5.7-1 -> 5.9-1)
    [2013-10-13 08:19] [PACMAN] upgraded ca-certificates (20130610-1 -> 20130906-1)
    [2013-10-13 08:19] [PACMAN] upgraded imagemagick (6.8.6.9-1 -> 6.8.7.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded poppler (0.24.1-1 -> 0.24.2-1)
    [2013-10-13 08:19] [PACMAN] upgraded poppler-qt4 (0.24.1-1 -> 0.24.2-1)
    [2013-10-13 08:19] [PACMAN] upgraded libusbx (1.0.16-2 -> 1.0.17-1)
    [2013-10-13 08:19] [PACMAN] installed python2-pillow (2.2.1-1)
    [2013-10-13 08:19] [PACMAN] upgraded libunrar (1:4.2.4-1 -> 1:5.0.12-1)
    [2013-10-13 08:19] [PACMAN] upgraded python2-psutil (1.0.1-2 -> 1.1.1-1)
    [2013-10-13 08:19] [PACMAN] upgraded calibre (1.3.0-1 -> 1.6-1)
    [2013-10-13 08:19] [PACMAN] upgraded cantarell-fonts (0.0.14-1 -> 0.0.15-1)
    [2013-10-13 08:19] [PACMAN] upgraded cdparanoia (10.2-4 -> 10.2-5)
    [2013-10-13 08:19] [PACMAN] upgraded gstreamer (1.0.10-1 -> 1.2.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded orc (0.4.17-1 -> 0.4.18-1)
    [2013-10-13 08:19] [PACMAN] upgraded gst-plugins-base-libs (1.0.10-1 -> 1.2.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded mpg123 (1.15.4-1 -> 1.16.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded neon (0.29.6-4 -> 0.30.0-1)
    [2013-10-13 08:19] [PACMAN] installed libsrtp (15.1c9bd90-1)
    [2013-10-13 08:19] [PACMAN] upgraded gst-plugins-bad (1.0.10-1 -> 1.2.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gst-plugins-base (1.0.10-1 -> 1.2.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded glib-networking (2.36.2-1 -> 2.38.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded libsoup (2.42.2-1 -> 2.44.0-1)
    [2013-10-13 08:19] [ALPM] warning: /etc/rc_maps.cfg installed as /etc/rc_maps.cfg.pacnew
    [2013-10-13 08:19] [PACMAN] upgraded v4l-utils (0.9.5-2 -> 1.0.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gst-plugins-good (1.0.10-1 -> 1.2.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded cogl (1.14.0-4 -> 1.16.0-2)
    [2013-10-13 08:19] [PACMAN] upgraded elfutils (0.155-1 -> 0.156-1)
    [2013-10-13 08:19] [PACMAN] upgraded mesa (9.2.0-2 -> 9.2.1-1)
    [2013-10-13 08:19] [PACMAN] upgraded json-glib (0.16.0-1 -> 0.16.2-1)
    [2013-10-13 08:19] [PACMAN] installed libevdev (0.4-2)
    [2013-10-13 08:19] [PACMAN] upgraded clutter (1.14.4-3 -> 1.16.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded clutter-gst (2.0.6-1 -> 2.0.8-1)
    [2013-10-13 08:19] [PACMAN] upgraded clutter-gtk (1.4.4-3 -> 1.4.4-4)
    [2013-10-13 08:19] [PACMAN] upgraded librsvg (1:2.37.0-1 -> 1:2.39.0-2)
    [2013-10-13 08:19] [PACMAN] upgraded gnome-desktop (1:3.8.3-2 -> 1:3.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded nautilus-sendto (3.8.0-2 -> 3.8.1-1)
    [2013-10-13 08:19] [PACMAN] upgraded cheese (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gtk2 (2.24.20-1 -> 2.24.22-1)
    [2013-10-13 08:19] [PACMAN] upgraded nspr (4.10-2 -> 4.10.1-1)
    [2013-10-13 08:19] [PACMAN] upgraded nss (3.15.1-1 -> 3.15.2-1)
    [2013-10-13 08:19] [PACMAN] upgraded chromium (29.0.1547.65-1 -> 30.0.1599.66-1)
    [2013-10-13 08:19] [PACMAN] upgraded xvidcore (1.3.2-1 -> 1.3.2-2)
    [2013-10-13 08:19] [PACMAN] upgraded ffmpeg (1:2.0.1-1 -> 1:2.0.2-2)
    [2013-10-13 08:19] [PACMAN] upgraded cinelerra-cv (1:2.2-17 -> 1:2.2-18)
    [2013-10-13 08:19] [PACMAN] upgraded cmake (2.8.11.2-2 -> 2.8.12-1)
    [2013-10-13 08:19] [PACMAN] upgraded device-mapper (2.02.100-1 -> 2.02.103-1)
    [2013-10-13 08:19] [PACMAN] upgraded popt (1.16-6 -> 1.16-7)
    [2013-10-13 08:19] [PACMAN] upgraded cryptsetup (1.6.2-1 -> 1.6.2-2)
    [2013-10-13 08:19] [PACMAN] upgraded curlftpfs (0.9.2-4 -> 0.9.2-5)
    [2013-10-13 08:19] [PACMAN] upgraded db (5.3.21-1 -> 5.3.21-2)
    [2013-10-13 08:19] [PACMAN] upgraded dialog (1.2_20130523-2 -> 1.2_20131001-1)
    [2013-10-13 08:19] [PACMAN] upgraded python2-mako (0.8.1-2 -> 0.9.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gobject-introspection (1.36.0-1 -> 1.38.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded libpeas (1.8.1-1 -> 1.9.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded gnome-icon-theme (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded eog (3.8.2-1 -> 3.10.0-1)
    [2013-10-13 08:19] [PACMAN] upgraded erlang (R16B01-2 -> R16B02-1)
    [2013-10-13 08:19] [PACMAN] upgraded poppler-glib (0.24.1-1 -> 0.24.2-1)
    [2013-10-13 08:19] [PACMAN] upgraded libsecret (0.15-2 -> 0.16-1)
    [2013-10-13 08:19] [PACMAN] upgraded evince (3.8.3-1 -> 3.10.0-2)
    [2013-10-13 08:20] [PACMAN] upgraded webkitgtk (2.0.4-1 -> 2.2.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded libnotify (0.7.5-1 -> 0.7.6-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-online-accounts (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded libgweather (3.8.2-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded evolution-data-server (3.8.5-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded fakeroot (1.19-1 -> 1.20-1)
    [2013-10-13 08:20] [PACMAN] upgraded file (5.14-1 -> 5.15-1)
    [2013-10-13 08:20] [PACMAN] upgraded p7zip (9.20.1-7 -> 9.20.1-8)
    [2013-10-13 08:20] [PACMAN] upgraded file-roller (3.8.4-1 -> 3.10.0-2)
    [2013-10-13 08:20] [PACMAN] upgraded firefox (23.0.1-1 -> 24.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded fltk (1.3.2-2 -> 1.3.2-3)
    [2013-10-13 08:20] [PACMAN] upgraded freetype2 (2.5.0.1-1 -> 2.5.0.1-2)
    [2013-10-13 08:20] [PACMAN] upgraded polkit (0.111-1 -> 0.112-1)
    [2013-10-13 08:20] [PACMAN] upgraded gconf (3.2.6-2 -> 3.2.6-3)
    [2013-10-13 08:20] [PACMAN] upgraded gcr (3.8.2-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gdbm (1.10-1 -> 1.10-2)
    [2013-10-13 08:20] [PACMAN] upgraded gjs (1.36.1-2 -> 1.38.1-1)
    [2013-10-13 08:20] [PACMAN] installed bluez (5.9-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-bluetooth (3.8.1-2 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-menus (3.8.0-2 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-session (3.8.4-1 -> 3.10.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded pygobject-devel (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded python2-gobject (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded ibus (1.5.3-2 -> 1.5.4-1)
    [2013-10-13 08:20] [PACMAN] installed geocode-glib (3.10.0-1)
    [2013-10-13 08:20] [PACMAN] installed geoclue2 (1.99.4-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-settings-daemon (3.8.4-2 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-themes-standard (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded libgdm (3.8.4-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded mutter (3.8.4-1 -> 3.10.0.1-1)
    [2013-10-13 08:20] [PACMAN] installed mutter-wayland (3.10.0.1-2)
    [2013-10-13 08:20] [PACMAN] upgraded networkmanager (0.9.8.2-1 -> 0.9.8.8-1)
    [2013-10-13 08:20] [PACMAN] upgraded network-manager-applet (0.9.8.2-1 -> 0.9.8.4-2)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-shell (3.8.4-1 -> 3.10.0.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded xorg-server-common (1.14.2-2 -> 1.14.3-2)
    [2013-10-13 08:20] [PACMAN] upgraded mtdev (1.1.3-1 -> 1.1.4-1)
    [2013-10-13 08:20] [PACMAN] upgraded xf86-input-evdev (2.8.1-1 -> 2.8.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded xorg-server (1.14.2-2 -> 1.14.3-2)
    [2013-10-13 08:20] [ALPM] warning: directory permissions differ on /var/lib/gdm/.config/dconf/
    filesystem: 700 package: 755
    [2013-10-13 08:20] [PACMAN] upgraded gdm (3.8.4-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded geogebra (4.2.56.0-1 -> 4.2.60.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded geoip-database (20130702-1 -> 20130919-1)
    [2013-10-13 08:20] [PACMAN] upgraded geoip (1.5.0-1 -> 1.5.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded glibmm (2.36.2-1 -> 2.38.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gmime (2.6.17-1 -> 2.6.18-1)
    [2013-10-13 08:20] [PACMAN] upgraded gmp (5.1.2-1 -> 5.1.3-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-calculator (3.8.2-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-common (3.7.4-2 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded udisks2 (2.1.0-3 -> 2.1.1-3)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-disk-utility (3.8.2-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnome-screenshot (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnonlin (0.10.17-1 -> 1.1.90-1)
    [2013-10-13 08:20] [PACMAN] upgraded gnupg (2.0.21-1 -> 2.0.22-1)
    [2013-10-13 08:20] [PACMAN] upgraded gparted (0.16.1-5 -> 0.16.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded mono (3.0.12-1 -> 3.2.3-1)
    [2013-10-13 08:20] [PACMAN] upgraded gtk-sharp-2 (2.12.11-1 -> 2.12.22-1)
    [2013-10-13 08:20] [PACMAN] upgraded gtkmm3 (3.8.1-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded gvfs (1.16.3-2 -> 1.18.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded gvfs-afc (1.16.3-2 -> 1.18.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libwbclient (4.0.9-1 -> 4.0.10-1)
    [2013-10-13 08:20] [PACMAN] upgraded talloc (2.0.8-1 -> 2.0.8-2)
    [2013-10-13 08:20] [PACMAN] upgraded smbclient (4.0.9-1 -> 4.0.10-1)
    [2013-10-13 08:20] [PACMAN] upgraded gvfs-smb (1.16.3-2 -> 1.18.2-1)
    [2013-10-13 08:20] [PACMAN] installed s-nail (14.4.4-1)
    [2013-10-13 08:20] [PACMAN] upgraded icedtea-web-java7 (1.4-2 -> 1.4.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded inetutils (1.9.1-6 -> 1.9.1.341-1)
    [2013-10-13 08:20] [PACMAN] upgraded inkscape (0.48.4-10 -> 0.48.4-11)
    [2013-10-13 08:20] [PACMAN] upgraded intel-tbb (4.1_20130613-1 -> 4.2_20130725-1)
    [2013-10-13 08:20] [PACMAN] upgraded jansson (2.4-1 -> 2.5-1)
    [2013-10-13 08:20] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded soprano (2.9.3-1 -> 2.9.4-1)
    [2013-10-13 08:20] [PACMAN] upgraded kdelibs (4.11.1-1 -> 4.11.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded nepomuk-core (4.11.1-1 -> 4.11.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded kactivities (4.11.1-1 -> 4.11.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libssh (0.5.4-1 -> 0.5.5-1)
    [2013-10-13 08:20] [PACMAN] upgraded oxygen-icons (4.11.1-1 -> 4.11.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded xorg-xauth (1.0.7-1 -> 1.0.8-1)
    [2013-10-13 08:20] [PACMAN] upgraded kdebase-runtime (4.11.1-2 -> 4.11.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-glibc (2.18-3 -> 2.18-5)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-dbus (1.6.12-1 -> 1.6.14-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-glib2 (2.36.4-1 -> 2.38.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-atk (2.8.0-1 -> 2.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-elfutils (0.155-2 -> 0.156-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-libpng (1.6.3-1 -> 1.6.5-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-libx11 (1.6.1-1 -> 1.6.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-gdk-pixbuf2 (2.28.2-1 -> 2.30.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-pango (1.34.1-1 -> 1.36.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-libxrandr (1.4.1-1 -> 1.4.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-gtk2 (2.24.20-2 -> 2.24.21-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-libsm (1.2.1-1 -> 1.2.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-libxv (1.0.9-1 -> 1.0.10-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-systemd (204-1 -> 208-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-mesa (9.2.0-1 -> 9.2.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-nspr (4.10-2 -> 4.10.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-sqlite (3.8.0.1-1 -> 3.8.0.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-nss (3.15.1-1 -> 3.15.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded lib32-v4l-utils (0.9.5-1 -> 1.0.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded libcacard (1.5.2-1 -> 1.6.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded libdvbpsi (1:0.2.2-1 -> 1:1.1.1-1)
    [2013-10-13 08:20] [PACMAN] upgraded libdvdcss (1.2.13-1 -> 1.2.13-2)
    [2013-10-13 08:20] [PACMAN] upgraded libgee (0.10.4-1 -> 0.12.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded libgnome-keyring (3.8.0-1 -> 3.10.0-1)
    [2013-10-13 08:20] [PACMAN] upgraded libkcddb (4.11.1-1 -> 4.11.2-1)
    [2013-10-13 08:20] [PACMAN] installed lua51-socket (2.0.2-5)
    [2013-10-13 08:20] [PACMAN] installed lua51-bitop (1.0.2-2)
    [2013-10-13 08:20] [PACMAN] installed lua51-expat (1.2.0-4)
    [2013-10-13 08:20] [PACMAN] upgraded libquvi-scripts (0.4.16-1 -> 0.9.20130903-2)
    [2013-10-13 08:20] [PACMAN] upgraded libquvi (0.4.1-2 -> 0.9.3-1)
    [2013-10-13 08:20] [PACMAN] upgraded libraw (0.15.4-1 -> 0.15.4-2)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-en-GB (4.1.1-1 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-common (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-base (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-calc (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-draw (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-gnome (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-impress (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-kde4 (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-math (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded postgresql-libs (9.2.4-2 -> 9.3.1-3)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-postgresql-connector (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-sdk (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:20] [PACMAN] upgraded libreoffice-sdk-doc (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:21] [PACMAN] upgraded libreoffice-writer (4.1.1-2 -> 4.1.2-1)
    [2013-10-13 08:21] [PACMAN] upgraded libsasl (2.1.26-4 -> 2.1.26-6)
    [2013-10-13 08:21] [PACMAN] upgraded links (2.7-2 -> 2.8-1)
    [2013-10-13 08:21] [PACMAN] upgraded linux-firmware (20130725-1 -> 20130903-1)
    [2013-10-13 08:21] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-10-13 08:21] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Starting build: 3.11.4-1-ARCH
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [consolefont]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Starting build: 3.11.4-1-ARCH
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [consolefont]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-10-13 08:21] [PACMAN] upgraded linux (3.10.10-1 -> 3.11.4-1)
    [2013-10-13 08:21] [PACMAN] upgraded lirc-utils (1:0.9.0-58 -> 1:0.9.0-63)
    [2013-10-13 08:21] [PACMAN] upgraded lvm2 (2.02.100-1 -> 2.02.103-1)
    [2013-10-13 08:21] [PACMAN] upgraded m4 (1.4.16-3 -> 1.4.17-1)
    [2013-10-13 08:21] [PACMAN] upgraded man-pages (3.53-1 -> 3.54-1)
    [2013-10-13 08:21] [PACMAN] upgraded mkvtoolnix-cli (6.3.0-2 -> 6.4.1-1)
    [2013-10-13 08:21] [PACMAN] upgraded mlt (0.9.0-4 -> 0.9.0-5)
    [2013-10-13 08:21] [PACMAN] upgraded mlt-python-bindings (0.9.0-4 -> 0.9.0-5)
    [2013-10-13 08:21] [PACMAN] upgraded mutagen (1.21-1 -> 1.22-1)
    [2013-10-13 08:21] [PACMAN] upgraded nvidia (325.15-5 -> 325.15-9)
    [2013-10-13 08:21] [PACMAN] upgraded oblogout (0.2-14 -> 0.2-15)
    [2013-10-13 08:21] [PACMAN] upgraded openbox (3.5.2-4 -> 3.5.2-5)
    [2013-10-13 08:21] [PACMAN] upgraded xine-lib (1.2.3-4 -> 1.2.4-1)
    [2013-10-13 08:21] [PACMAN] upgraded opencv (2.4.6.1-2 -> 2.4.6.1-3)
    [2013-10-13 08:21] [PACMAN] upgraded openshot (1.4.3-2 -> 1.4.3-3)
    [2013-10-13 08:21] [PACMAN] upgraded openssh (6.2p2-1 -> 6.3p1-1)
    [2013-10-13 08:21] [PACMAN] upgraded p11-kit (0.18.4-1 -> 0.20.1-1)
    [2013-10-13 08:21] [PACMAN] upgraded pambase (20130113-1 -> 20130928-1)
    [2013-10-13 08:21] [ALPM-SCRIPTLET]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> The file /etc/sysctl.conf has been removed from this
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> package, as all its settings are now kernel defaults.
    [2013-10-13 08:21] [ALPM-SCRIPTLET]
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> If you had customized it, you need to rename it as
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> /etc/sysctl.d/99-sysctl.conf since from version 207 on
    [2013-10-13 08:21] [ALPM-SCRIPTLET] ==> systemd only applies settings from /etc/sysctl.d/* .
    [2013-10-13 08:21] [ALPM-SCRIPTLET]
    [2013-10-13 08:21] [PACMAN] upgraded procps-ng (3.3.8-2 -> 3.3.8-3)
    [2013-10-13 08:21] [PACMAN] upgraded projectm (2.1.0-6 -> 2.1.0-8)
    [2013-10-13 08:21] [PACMAN] upgraded python-cairo (1.10.0-2 -> 1.10.0-3)
    [2013-10-13 08:21] [PACMAN] upgraded python-gobject (3.8.3-1 -> 3.10.0-1)
    [2013-10-13 08:21] [PACMAN] upgraded python-pyelftools (0.20-2 -> 0.20-3)
    [2013-10-13 08:21] [PACMAN] upgraded python2-atspi (2.8.0-1 -> 2.10.0-1)
    [2013-10-13 08:21] [PACMAN] upgraded python2-setuptools (1.0-1 -> 1.1.6-1)
    [2013-10-13 08:21] [PACMAN] upgraded sip (4.15.1.908d49322dcf-1 -> 4.15.2-1)
    [2013-10-13 08:21] [PACMAN] upgraded python2-sip (4.15.1.908d49322dcf-1 -> 4.15.2-1)
    [2013-10-13 08:21] [PACMAN] upgraded seabios (1.7.2-1 -> 1.7.3.1-2)
    [2013-10-13 08:21] [PACMAN] installed celt0.5.1 (0.5.1.3-2)
    [2013-10-13 08:21] [PACMAN] installed spice (0.12.4-2)
    [2013-10-13 08:21] [PACMAN] upgraded qemu (1.5.2-1 -> 1.6.1-1)
    [2013-10-13 08:21] [PACMAN] upgraded raptor (2.0.9-2 -> 2.0.10-2)
    [2013-10-13 08:21] [PACMAN] upgraded rsync (3.0.9-6 -> 3.1.0-1)
    [2013-10-13 08:21] [PACMAN] upgraded rtkit (0.11-2 -> 0.11-4)
    [2013-10-13 08:21] [PACMAN] upgraded samba (4.0.9-1 -> 4.0.10-1)
    [2013-10-13 08:21] [PACMAN] upgraded sane (1.0.23-7 -> 1.0.24-2)
    [2013-10-13 08:21] [PACMAN] upgraded sbcl (1.1.10-1 -> 1.1.12-1)
    [2013-10-13 08:21] [PACMAN] upgraded serf (1.3.0-1 -> 1.3.1-2)
    [2013-10-13 08:21] [PACMAN] upgraded steam (1.0.0.40-1 -> 1.0.0.42-1)
    [2013-10-13 08:21] [PACMAN] upgraded subversion (1.8.1-2 -> 1.8.3-1)
    [2013-10-13 08:21] [PACMAN] upgraded sudo (1.8.7-1 -> 1.8.8-1)
    [2013-10-13 08:21] [PACMAN] upgraded systemd-sysvcompat (204-3 -> 208-1)
    [2013-10-13 08:21] [PACMAN] upgraded tar (1.26-4 -> 1.27-1)
    [2013-10-13 08:21] [PACMAN] upgraded texinfo (5.1-1 -> 5.2-1)
    [2013-10-13 08:21] [PACMAN] upgraded thunderbird (17.0.8-1 -> 24.0-1)
    [2013-10-13 08:21] [PACMAN] upgraded totem-plparser (3.4.5-1 -> 3.10.0-2)
    [2013-10-13 08:21] [PACMAN] upgraded totem (3.8.2-2 -> 3.10.1-1)
    [2013-10-13 08:21] [PACMAN] upgraded unrar (1:4.2.4-1 -> 1:5.0.12-1)
    [2013-10-13 08:21] [PACMAN] upgraded vala (0.20.1-1 -> 0.22.0-1)
    [2013-10-13 08:21] [PACMAN] upgraded valgrind (3.8.1-3 -> 3.8.1-4)
    [2013-10-13 08:21] [PACMAN] upgraded vlc (2.0.8.a-1 -> 2.1.0-3)
    [2013-10-13 08:21] [PACMAN] upgraded vte-common (0.34.7-1 -> 0.34.8-1)
    [2013-10-13 08:21] [PACMAN] upgraded vte3 (0.34.7-1 -> 0.34.8-1)
    [2013-10-13 08:21] [PACMAN] upgraded weechat (0.4.1-4 -> 0.4.2-1)
    [2013-10-13 08:21] [PACMAN] upgraded wget (1.14-2 -> 1.14-3)
    [2013-10-13 08:21] [PACMAN] upgraded wine (1.7.1-1 -> 1.7.4-1)
    [2013-10-13 08:21] [PACMAN] upgraded wine_gecko (2.21-1 -> 2.24-1)
    [2013-10-13 08:21] [PACMAN] upgraded xf86-video-fbdev (0.4.3-3 -> 0.4.4-1)
    [2013-10-13 08:21] [PACMAN] upgraded xorg-xinit (1.3.2-3 -> 1.3.3-1)
    [2013-10-13 08:21] [PACMAN] upgraded xorg-xinput (1.6.0-1 -> 1.6.1-1)
    [2013-10-13 08:21] [PACMAN] upgraded youtube-dl (2013.09.10-1 -> 2013.10.07-1)
    [2013-10-13 08:21] [PACMAN] upgraded zsh (5.0.2-3 -> 5.0.2-4)
    The other problems are whenever a program tries to load a file browser. So for example in lowriter when I save a document for the first time it hangs for about 30 seconds before showing me the little file browser it uses to select a location to save the document. This happens for any similar function by a program (e.g. extracting files using file-roller, saving in inkscape, "save as" in firefox). However these programs' other features all work fine.
    My storage devices are an internal hard drive (home partition), another internal hard drive (just storage), an internal ssd (boot and root), an external usb hard drive (just data storage) and a samba share on a raspberry pi elsewhere in my house. boot, root, home and samba are all mounted in fstab. Looking at it now though, it seems the samba drive is not being mounted and the internal storage drive is not visible in thunar. I just ran "sudo mount -a" and it's sat there not visibly doing anything, been like that for a few minutes now.
    The terminal output in the original post is the error message for both clementine and thunar. Only the program encountering the error hangs, the rest of the system works fine. Once thunar has loaded, it responds quickly and normally. When I open a terminal to access drives through the command line, nothing hangs at all, so it seems to only affect gui file browsing.
    I hope that answers your questions and provides the information needed, thanks again for responding, I really appreciate the help
    edit: I needed to access a file on the raspberry pi, obviously the samba was inaccessible via my main machine so I plugged the pi into a monitor to access the file directly - it was having a kernel panic. I powered off the pi, uncommented it from my fstab and now everything works fine (except my pi installation). I had no idea an error on a samba share on a different machine could have such an impact on my desktop. Marking this thread as solved.
    Last edited by gav989 (2013-10-20 19:13:39)

  • [solved] XBMC - autostart torrent program in the background?

    I'm back with more xbmc questions and since 99% of the users at xbmc use *buntu and their debian startup scripts, I'm going to bug you guys.
    I've finally got a dedicated htpc that boots directly to xbmc without even bothering with a WM.
    Now, I'm hoping to get a torrent program (with rss functionality) to boot at startup as well as having access to some kind of gui to check up on the torrents occasionally.
    I'm mostly looking at deluge since it's what I know and the wife wants some kind of gui so she can add torrents and check up on stuff too.  (Hey, we're a windows free household but not GUI free, we're not that geeky)
    I've also looked a bit at rtorrent + flexrss + some webgui of some kind.
    I'm not really looking to start a thread with a hundred posts saying to try: transmission, ktorrent, deluge, rtorrent, vuze, utorrent+wine, etc.  I'm more interested in finding out how to get the specific functionality out of the software.
    That being said, if you can help me accomplish what I'm aiming for I don't give a damn what torrent program I'm using.
    Here's what I need:
    1) Torrent program must have rss functionality
    2) I need a script (or the ability) to get it to boot at startup without a WM or DE
    2a) I can boot a WM if needed (openbox)
    3) i need it to run in the background while XBMC is fullscreen and doing it's thing
    4) Prefer access to either standard gui or web gui so I can check up on the torrents occasionaly
    5) Can I have a pony?
    Thanks guys!
    Last edited by ctarwater (2009-04-23 04:25:28)

    Actually I was just thinking about it and I may be overcomplicating things (like usual)
    I may just change my current setup to boot directly into openbox and autostart xbmc fullscreen.
    If I do that, then I can autostart my torrent program just like I would any other program in openbox.
    Doing so should allow xbmc to autostart fullscreen while allowing deluge to autostart in the background.
    My current setup looks like this:
    - mingetty to autologin user
    - .bashrc runs "startx"
    - .xinitrc runs "/usr/bin/xbmc --standalone"
    I'm going to try this out to see how it works:
    - mingetty
    - .bashrc runs "startx"
    - .xinitrc runs "exec openbox-session"
    - .config/openbox/autostart.sh runs "/usr/bin/xbmc --standalone &" and "(sleep 2 && deluge) &"
    I'm still a bit new to openbox though, we'll see.
    Thoughts?
    Last edited by ctarwater (2009-04-23 01:25:53)

  • I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Alguine can help solve the problem. thanks

    I have a new iphone 5. After update and download some programs I can not just turn it on and shown in the LCD "iTunes" with a picture of a USB cable. - Can anyone help me solve the problem. thanks

    Its trying to tell you to connect it by usb to a computer to reflash a failed firmware flash
    You should comply

  • I bought an i pad as second owner, the first owner said he just open it but when i returned to my twon, i realized that he make account and download some programes, i lost the opportunity to download free I work programes how can i solve this problem

    i bought an i pad (4) on 2014 as second owner, the first owner said he just open it but when i returned to my town, i realized that he make account and download some programs, i lost the opportunity to download free I work programs how can i solve this problem?

    If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
    IF the iPad is working ok but is signed in to another users Apple ID use the Settings app to sign out of the old ID and sign in to your Apple ID.
    Settings > itunes and App Store > tap on the applie ID and sign out > sign in with your Apple ID.
    you should then be able to download or purchase apps using your Apple ID.

  • [SOLVED] tilda won't work with openbox autostart

    I tried to start tilda with ~/.config/openbox/autostart. I can see tilda among the processes but pulldown key has no effect.
    Tilda works when starting from terminal with the following error messages:
    tilda:28274): Gtk-WARNING **: Unable to locate theme engine in module_path: "clearlooks",
    (tilda:28274): Gdk-CRITICAL **: IA__gdk_drawable_get_display: assertion `GDK_IS_DRAWABLE (drawable)' failed
    (tilda:28274): Gdk-CRITICAL **: _gdk_x11_window_get_toplevel: assertion `GDK_IS_WINDOW (window)' failed
    (tilda:28274): Gdk-WARNING **: gdk_window_set_user_time called on non-toplevel
    FYI: I've recently removed gnome shell from my system and installed openbox. Maybe something missing? Any suggestion?
    Last edited by siriusb (2011-11-10 13:57:52)

    I installed the package, restarted X but now tilda doesn't start from terminal either.

Maybe you are looking for