[SOLVED] openbox window borders and alt tab

There are two (atleast) things i'd like to fix in openbox (and lxde). I haven't found any info on it.
1) Window borders are only one pixel. It's hard to resize windows and very hard with touchpad. I have room for it on a 1400x1050 resolution. On kde I have 6 pixels. How can I widen the borders?
2) Alt + tab cycles through the windows on the current desktop only. I would like it to cycle through all windows on all desktops. I know I can middleclick on the background, but I'd like to alt tab too. How do I do that?
Last edited by kanonmat (2009-04-11 21:49:01)

For 2 : Add this to your keybindings in rc.xml
<keybind key="W-Tab">
<action name="NextWindow">
<allDesktops>yes</allDesktops>
</action>
</keybind>
<keybind key="W-S-Tab">
<action name="PreviousWindow">
<allDesktops>yes</allDesktops>
</action>
</keybind>
This will use the Super+Tab and Super+Shift+Tab to move between windows across all desktops. You can still use Alt+Tab and Alt+Shift+Tab to move between windows within the same desktop
Last edited by Inxsible (2009-04-11 19:29:43)

Similar Messages

ThinkVantage Communications Utility and Alt+Tab in Windows 7

When the ThinkVantage Communications Utility is installed, the Alt+Tab switcher doesn't stay on top of other windows during Aero Peek. Uninstalling it remedies it, and reinstalling it causes it. It doesn't seem to affect Server 2008 R2.
Anyone else seeing this issue?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen
Solved!
Go to Solution.

Discovered the issue here:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Multi-touch-Capabiility-question-regarding-...
A bit of Googling turned up a thread implicating ThinkVantage Communications Utility.
The weird thing is that Server 2008 R2 on my X100e seems to be unaffected.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Different icon for Frame's title bar and alt tab

I have been using Frame.setIconImage to supply the image icon for the title bar and (on Windows, the <alt><tab> image). The trouble is there is only one image for both but one is usually small 16x16 and the other is usually large 32x32. What I have been doing is creating an image that is 32x32 but scales back to 16x16 and still looks good.
The trouble is it is tricky to create graphics like that. I wondered is there a way to specify one image for the title bar and another image for the <alt><tab> image?
thanks,
Ian

Has anyone encountered this problem before? Is there
a solution? Or can anyone say definitivly that
specifying the title bar icon and the <alt><tab> icon
separately is not possible?Sorry- you can't do it. Windows apps can do this easily because they use a .ico that can contain both the 16x16 and 32x32.
There are a couple of hacks I tried once, trying to swap icons based on events, but they are horrible hacks and don't work well enough to use. Your choices are as follows:
1. Use a 16x16 .gif as your icon and have it look good in the upper left hand corner of your frame but horrible during alt-tab,
or
2. Use a 32x32 .gif and have it look poorly in the upper left hand corner of your frame but good during most other times.
I'd choose #1.
(The reason behind all of this is Java does a much worse job of resizing your icon than you could do yourself with a little work in Paint Shop Pro.)

[Solved] Openbox Window Placement not in Center

In obconf, under Windows, I have:
√ Focus new windows when they appear
√ Center new windows when they are placed
Prefer to place new windows on: The monitor with the mouse
Primary monitor: Monitor With Mouse Pointer
But in the corresponding rc.xml, I have
<placement>
<policy>Smart</policy>

<center>yes</center>

<monitor>Mouse</monitor>

<primaryMonitor>Mouse</primaryMonitor>

</placement>
And the behaviour is this:
Windows try to get as close to the top left corner as possible without overlapping any other windows. This does sound like what "Smart" policy would refer to, but it is not listening to the <center>yes</center> tag.
Last edited by jameh0 (2014-03-22 17:59:40)

drcouzelis wrote:
drcouzelis wrote:it's not hard to patch, so no problem.
I just finished patching Openbox to restore the former random window placement behavior. You can find it here: openbox-git-random-placement
It works but I didn't fully test all scenarios (multi-monitors, different window states, and so on...) so if you find any bugs in my patch or random window placement code please let me know!
Im having trouble discerning what exactly you mean. I could build your version to find out, but the current openbox-git seems to work exactly this way?
I have smart placement and center set. When I open a new window on a blank workspace, its placed centered. If I open another, it will be placed in empty space. It will keep placing in empty space until the desktop is completely hidden, and then it will start randomly placing the window.
I have considered talking to the Openbox devs about possibly implementing the placement algorithm of Fluxbox- Flux will evenly distribute the windows even after the entire screen is filled/covered.
**EDIT** Do you mean your version starts to random place the moment it cant fit the window in empty space without even partially obscuring an existing window?
Last edited by GSF1200S (2014-03-27 04:18:56)

[Solved] Tiling window managers and on-screen keyboards

I've got a small, old tablet pc with a 10" touchscreen, and was hoping to use a tiling window manager so that I could have an on-screen keyboard (onboard, cellwriter etc) stuck to the bottom third of the screen, and other applications 'fullscreened' in the rest of it, preferably in tabs.
I've tried a few tabbed tiling wm's (i3, xmonad, wmii, ion3) and while I can get the layout I want, I'm unable to use the onscreen keyboard due to focus switching - clicking on the 'keys' of the keyboard (or in fact, moving the cursor into it's frame/window/whatever) moves the focus to the keyboard, so it sends the typed text to itself.
Since tiling wm's are usually targeted at keyboard users, I'm having trouble finding which wm's listen to the onscreen keyboard's 'nofocus' properties. Does anyone know of any tiling wm's that respect that property and work with onscreen keyboards? Or even if there are simple config changes I can do to stop the keyboard from getting focus?
Failing that, any other window managers I could try? fwiw, I really liked twindy (http://www.niallmoody.com/twindy/about.htm) but it suffered from the same problem (and wasted a fair amount of space with its sidebar).
Thanks!
Last edited by mjc506 (2010-12-10 00:41:01)

Ah, thanks, that got me looking for and finding an xmonad patch that should make it not focus on onboard and cellwriter, amongst others: http://code.google.com/p/xmonad/issues/detail?id=177 Its a shame that the patch still isn't in the darcs repo, but I guess a working open office is more important that the few people using onscreen keyboards!
...time to compile from source... ugh - only got a single core running at 900kHz...

Xcompmgr messing with openbox windows (conky and kde apps only)

here's the involved packages:
openbox 3.4.7.2-1
nvidia 177.82-1
xorg-server 1.5.3-3
xcompmgr 1.1.4-1
kdelibs3 3.5.10-2
conky 1.6.1-2
now the issue is primarily with xcompmgr. when it's running (default options or the whole -cCfF... stuff doesn't make a difference). i have the following:
whenever a kde apps window opens. (i.e. i start amarok or k3b; k3b opens new windows during burn start/stop process) my conky will disappear only to flicker and reappear a few seconds later. (this only happens with kde apps)
when i'm tweaking my conky i will often `pkill conky; sleep 3; conky` to see my changes. when i kill conky, ALL of my active windows on the current desktop disappear and only reappear if a) they are redrawn because of an update to their contents on their own accord, or b) (kinda the same thing) i grab a window and drag it all over the screen resetting whatever i pass over to it's correct visual state. (this only happens when killing conky)
this is annoying me, i love the shadows/fading from xcompmgr but this flickering makes my whole experience feel unstable and i have to turn it off after a few minutes. turn off xcompmgr and it's rock solid just as before... snappier too i think.
this behavior started immediately after the recent xorg update (i saved that for last because i know were all sick of _that_). i changed nothing, but for the -Syu when this happened.
anyways, your thoughts and help is much appreciated.

so i'm resurrecting this thread because i hoped, and prayed, that xorg 1.6 in testing would fix this problem. i've been working my ass off to keep my system back in xorg 1.4. my desktop just looks so oldfashioned w/o shadows and transparency.
ok so to re-outline, i'm running:
pacman -Q stuff
xorg-server 1.6.0-1
nvidia 180.29-3
openbox 3.4.7.2-1
xcompmgr 1.1.4-1
with this gpu:
hwd -s | grep video
Video : GeForce 7150 / nForce 630i server: XFree86 (vesa)
i created a minimal xorg.conf via nvidia-xconfig an added a few suggested options (although they _really_ don't seem to affect this bug...):
cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Feb 5 00:08:50 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "False"
Option "DamageEvents" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
now, here's what happens:
i startx, .xinitrc or autostart.sh bring up xcompmgr, bmpanel, and conky
if i open amarok or k3b, conky and bmpanel (both using transparency) vanish while the splash screen(s) show.
when i burn something with k3b (and new windows appear) i see similar behavior
sometimes it's just for a sec and then it's back, sometimes conky comes back with part of itself missing
also, if you execute `pkill conky` from an xterm, all windows are 'destroyed' until you [blindly] grab that xterm window and move it about your desktop 'revealing' the desktops contents. please see this screenshot for this in action.
killing xcompmgr fixes all this... but it's so ugly. the problems go away if i downgrade to xorg-server 1.4 (and also adjust any related/dependant packages to match).
please please, tell me i'm not alone! a fix would be nice too .
thanks in advance... again
Last edited by brisbin33 (2009-03-05 01:30:10)

Relocate openbox window borders

hi everyone.
i recently installed openbox on my netbook. and since its aspect ratio is at 16:9 it seems more efficient to me to locate the window-decorations to the left or right side of the windows.
so my question is: does openbox allow this? i know that openbox allows to hide the decoration all together but that would just be weird workaround for me.
so is there any setting i could apply?
thanks in advance :-)

I also had the desire to do so, but googling for "openbox title bar position" gave me no cookies. The only WM where I have seen this and did it myself is the Bespin theme for KDE4. I wonder if that is can be done in openbox, that would give me a huge boost to switch from KDE4.

[SOLVED] Openbox window titlebar height reduced on maximized windows

Hello, after a update I have this "problem"
http://i44.tinypic.com/1498cc6.png
http://i43.tinypic.com/wlxjcl.jpg
When the window is maximized the height of the titlebar is reduced
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by Totoxa (2013-08-14 14:59:50)

I know that latest openbox update modified theme behaviour
I think it's a theme problem

[SOLVED] UEFI Windows 7 And ArchLinux

Hey guys
I had installed Windows 7 beside Arch Linux as legacy mode and everything was okay.
But now I decide to install them as UEFI mode.
When I converted my HDD to GPT, Windows created a 128MiB FAT32 Partition for itself.
Am I supposed to create any other partition for EFI boot?
Thanks
Last edited by Known (2013-06-04 08:55:40)

re: ESP
Known wrote:And one more question: Is it better to extend it to 512MiB?
In theory, a smallish ESP is sufficient unless you're storing big files on it (say, several Linux kernels and initrds). In practice, some people have reported problems with FAT32 ESPs smaller than 512MiB. It seems that some EFIs have buggy or finicky FAT drivers that can fail to see files or otherwise misbehave on FAT32 partitions smaller than 512MiB. If you run into that problem, you'll have to either expand the ESP or convert it to FAT16. Note, however, that the EFI spec is explicit in saying that the ESP should be FAT32, not FAT16, and the Windows installer tends to flake out if it sees a FAT16 ESP. Thus, an ESP of 512MiB or larger (I recommend more like 550MiB because of issues of the default FAT size in mkdosfs and the potential for MiB vs. MB confusions) is best if you're starting from scratch. A smaller ESP does work for many people, though.

[Solved] LXDE missing window borders (or decoratioins, widget?)

Hello,
The LXDE runs fine on my newly built arch for a couple of days, and then I must have done something (e.g. upgraded or uninstalled some packages) and now I can still log into LXDE by using slim login manager or startx command, but none of the applications will have the window borders and I am not able to move the application window around or minimize/resize the window.
Here is my .xinitrc file
[sgeuser@sge00 ~]$ cat .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
FontPath /usr/share/fonts/100dpi
xset -dpms
xset s off
exec /usr/bin/startlxde
Here is my systemd journal since reboot:
[1;39m-- Reboot --[0m
Sep 02 13:13:37 sge00 systemd-journal[98]: Allowing runtime journal files to grow to 100.3M.
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys cpuset
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys cpu
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys cpuacct
Sep 02 13:13:37 sge00 kernel: Linux version 3.10.10-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Aug 30 11:30:06 CEST 2013
Sep 02 13:13:37 sge00 kernel: Command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 02 13:13:37 sge00 kernel: e820: BIOS-provided physical RAM map:
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
Sep 02 13:13:37 sge00 kernel: NX (Execute Disable) protection: active
Sep 02 13:13:37 sge00 kernel: SMBIOS 2.5 present.
Sep 02 13:13:37 sge00 kernel: DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Sep 02 13:13:37 sge00 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Sep 02 13:13:37 sge00 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Sep 02 13:13:37 sge00 kernel: No AGP bridge found
Sep 02 13:13:37 sge00 kernel: e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
Sep 02 13:13:37 sge00 kernel: MTRR default type: uncachable
Sep 02 13:13:37 sge00 kernel: MTRR variable ranges disabled:
Sep 02 13:13:37 sge00 kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep 02 13:13:37 sge00 kernel: CPU MTRRs all blank - virtualized system.
Sep 02 13:13:37 sge00 kernel: found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Sep 02 13:13:37 sge00 kernel: Scanning 1 areas for low memory corruption
Sep 02 13:13:37 sge00 kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x00000000-0x000fffff] page 4k
Sep 02 13:13:37 sge00 kernel: BRK [0x01b23000, 0x01b23fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: BRK [0x01b24000, 0x01b24fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: BRK [0x01b25000, 0x01b25fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x7fa00000-0x7fbfffff] page 2M
Sep 02 13:13:37 sge00 kernel: BRK [0x01b26000, 0x01b26fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x7c000000-0x7f9fffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x7c000000-0x7f9fffff] page 2M
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x00100000-0x001fffff] page 4k
Sep 02 13:13:37 sge00 kernel: [mem 0x00200000-0x7bffffff] page 2M
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x7fc00000-0x7ffeffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x7fc00000-0x7fdfffff] page 2M
Sep 02 13:13:37 sge00 kernel: [mem 0x7fe00000-0x7ffeffff] page 4k
Sep 02 13:13:37 sge00 kernel: BRK [0x01b27000, 0x01b27fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: RAMDISK: [mem 0x7fd22000-0x7ffeefff]
Sep 02 13:13:37 sge00 kernel: ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
Sep 02 13:13:37 sge00 kernel: ACPI: XSDT 000000007fff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
Sep 02 13:13:37 sge00 kernel: ACPI: FACP 000000007fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
Sep 02 13:13:37 sge00 kernel: ACPI: DSDT 000000007fff0470 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
Sep 02 13:13:37 sge00 kernel: ACPI: FACS 000000007fff0200 00040
Sep 02 13:13:37 sge00 kernel: ACPI: APIC 000000007fff0240 0005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
Sep 02 13:13:37 sge00 kernel: ACPI: SSDT 000000007fff02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
Sep 02 13:13:37 sge00 kernel: ACPI: Local APIC address 0xfee00000
Sep 02 13:13:37 sge00 kernel: No NUMA configuration found
Sep 02 13:13:37 sge00 kernel: Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
Sep 02 13:13:37 sge00 kernel: Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
Sep 02 13:13:37 sge00 kernel: NODE_DATA [mem 0x7fd1d000-0x7fd21fff]
Sep 02 13:13:37 sge00 kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d400000-ffff88007f3fffff] on node 0
Sep 02 13:13:37 sge00 kernel: Zone ranges:
Sep 02 13:13:37 sge00 kernel: DMA [mem 0x00001000-0x00ffffff]
Sep 02 13:13:37 sge00 kernel: DMA32 [mem 0x01000000-0xffffffff]
Sep 02 13:13:37 sge00 kernel: Normal empty
Sep 02 13:13:37 sge00 kernel: Movable zone start for each node
Sep 02 13:13:37 sge00 kernel: Early memory node ranges
Sep 02 13:13:37 sge00 kernel: node 0: [mem 0x00001000-0x0009efff]
Sep 02 13:13:37 sge00 kernel: node 0: [mem 0x00100000-0x7ffeffff]
Sep 02 13:13:37 sge00 kernel: On node 0 totalpages: 524174
Sep 02 13:13:37 sge00 kernel: DMA zone: 64 pages used for memmap
Sep 02 13:13:37 sge00 kernel: DMA zone: 21 pages reserved
Sep 02 13:13:37 sge00 kernel: DMA zone: 3998 pages, LIFO batch:0
Sep 02 13:13:37 sge00 kernel: DMA32 zone: 8128 pages used for memmap
Sep 02 13:13:37 sge00 kernel: DMA32 zone: 520176 pages, LIFO batch:31
Sep 02 13:13:37 sge00 kernel: ACPI: PM-Timer IO Port: 0x4008
Sep 02 13:13:37 sge00 kernel: ACPI: Local APIC address 0xfee00000
Sep 02 13:13:37 sge00 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 02 13:13:37 sge00 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Sep 02 13:13:37 sge00 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 02 13:13:37 sge00 kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Sep 02 13:13:37 sge00 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 02 13:13:37 sge00 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 02 13:13:37 sge00 kernel: ACPI: IRQ0 used by override.
Sep 02 13:13:37 sge00 kernel: ACPI: IRQ2 used by override.
Sep 02 13:13:37 sge00 kernel: ACPI: IRQ9 used by override.
Sep 02 13:13:37 sge00 kernel: Using ACPI (MADT) for SMP configuration information
Sep 02 13:13:37 sge00 kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Sep 02 13:13:37 sge00 kernel: nr_irqs_gsi: 40
Sep 02 13:13:37 sge00 kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 02 13:13:37 sge00 kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Sep 02 13:13:37 sge00 kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Sep 02 13:13:37 sge00 kernel: e820: [mem 0x80000000-0xfffbffff] available for PCI devices
Sep 02 13:13:37 sge00 kernel: Booting paravirtualized kernel on bare hardware
Sep 02 13:13:37 sge00 kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
Sep 02 13:13:37 sge00 kernel: PERCPU: Embedded 28 pages/cpu @ffff88007fa00000 s86016 r8192 d20480 u1048576
Sep 02 13:13:37 sge00 kernel: pcpu-alloc: s86016 r8192 d20480 u1048576 alloc=1*2097152
Sep 02 13:13:37 sge00 kernel: pcpu-alloc: [0] 0 1
Sep 02 13:13:37 sge00 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
Sep 02 13:13:37 sge00 kernel: Policy zone: DMA32
Sep 02 13:13:37 sge00 kernel: Kernel command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 02 13:13:37 sge00 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep 02 13:13:37 sge00 kernel: Checking aperture...
Sep 02 13:13:37 sge00 kernel: No AGP bridge found
Sep 02 13:13:37 sge00 kernel: Calgary: detecting Calgary via BIOS EBDA area
Sep 02 13:13:37 sge00 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Sep 02 13:13:37 sge00 kernel: Memory: 2049056k/2097088k available (4943k kernel code, 392k absent, 47640k reserved, 4024k data, 1124k init)
Sep 02 13:13:37 sge00 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep 02 13:13:37 sge00 kernel: Preemptible hierarchical RCU implementation.
Sep 02 13:13:37 sge00 kernel: RCU dyntick-idle grace-period acceleration is enabled.
Sep 02 13:13:37 sge00 kernel: Dump stacks of tasks blocking RCU-preempt GP.
Sep 02 13:13:37 sge00 kernel: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
Sep 02 13:13:37 sge00 kernel: NR_IRQS:4352 nr_irqs:512 16
Sep 02 13:13:37 sge00 kernel: Console: colour VGA+ 80x25
Sep 02 13:13:37 sge00 kernel: console [tty0] enabled
Sep 02 13:13:37 sge00 kernel: allocated 8388608 bytes of page_cgroup
Sep 02 13:13:37 sge00 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep 02 13:13:37 sge00 kernel: tsc: Fast TSC calibration failed
Sep 02 13:13:37 sge00 kernel: tsc: PIT calibration matches PMTIMER. 2 loops
Sep 02 13:13:37 sge00 kernel: tsc: Detected 2708.883 MHz processor
Sep 02 13:13:37 sge00 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5419.50 BogoMIPS (lpj=9029610)
Sep 02 13:13:37 sge00 kernel: pid_max: default: 32768 minimum: 301
Sep 02 13:13:37 sge00 kernel: Security Framework initialized
Sep 02 13:13:37 sge00 kernel: AppArmor: AppArmor disabled by boot time parameter
Sep 02 13:13:37 sge00 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 02 13:13:37 sge00 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 02 13:13:37 sge00 kernel: Mount-cache hash table entries: 256
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys memory
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys devices
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys freezer
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys net_cls
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys blkio
Sep 02 13:13:37 sge00 kernel: CPU: Physical Processor ID: 0
Sep 02 13:13:37 sge00 kernel: CPU: Processor Core ID: 0
Sep 02 13:13:37 sge00 kernel: mce: CPU supports 0 MCE banks
Sep 02 13:13:37 sge00 kernel: [117B blob data]
Sep 02 13:13:37 sge00 kernel: Freeing SMP alternatives: 20k freed
Sep 02 13:13:37 sge00 kernel: ACPI: Core revision 20130328
Sep 02 13:13:37 sge00 kernel: ACPI: All ACPI Tables successfully acquired
Sep 02 13:13:37 sge00 kernel: ftrace: allocating 19652 entries in 77 pages
Sep 02 13:13:37 sge00 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 02 13:13:37 sge00 kernel: smpboot: CPU0: Intel(R) Core(TM) i7-3820QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
Sep 02 13:13:37 sge00 kernel: Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
Sep 02 13:13:37 sge00 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
Sep 02 13:13:37 sge00 kernel: smpboot: Booting Node 0, Processors #1 OK
Sep 02 13:13:37 sge00 kernel: mce: CPU supports 0 MCE banks
Sep 02 13:13:37 sge00 kernel: TSC synchronization [CPU#0 -> CPU#1]:
Sep 02 13:13:37 sge00 kernel: Measured 31057 cycles TSC warp between CPUs, turning off TSC clock.
Sep 02 13:13:37 sge00 kernel: tsc: Marking TSC unstable due to check_tsc_sync_source failed
Sep 02 13:13:37 sge00 kernel: Brought up 2 CPUs
Sep 02 13:13:37 sge00 kernel: smpboot: Total of 2 processors activated (10839.01 BogoMIPS)
Sep 02 13:13:37 sge00 kernel: devtmpfs: initialized
Sep 02 13:13:37 sge00 kernel: RTC time: 17:13:36, date: 09/02/13
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 16
Sep 02 13:13:37 sge00 kernel: ACPI: bus type PCI registered
Sep 02 13:13:37 sge00 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Sep 02 13:13:37 sge00 kernel: PCI: Using configuration type 1 for base access
Sep 02 13:13:37 sge00 kernel: bio: create slab <bio-0> at 0
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(Module Device)
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(Processor Device)
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(Processor Aggregator Device)
Sep 02 13:13:37 sge00 kernel: ACPI: EC: Look up EC in DSDT
Sep 02 13:13:37 sge00 kernel: ACPI: Executed 1 blocks of module-level executable AML code
Sep 02 13:13:37 sge00 kernel: ACPI: Interpreter enabled
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI: (supports S0 S5)
Sep 02 13:13:37 sge00 kernel: ACPI: Using IOAPIC for interrupt routing
Sep 02 13:13:37 sge00 kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Sep 02 13:13:37 sge00 kernel: ACPI: No dock devices found.
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
Sep 02 13:13:37 sge00 kernel: PCI: root bus 00: using default resources
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Sep 02 13:13:37 sge00 kernel: PCI host bridge to bus 0000:00
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
Sep 02 13:13:37 sge00 kernel: pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 10: [io 0xd040-0xd047]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 18: [io 0xd050-0xd057]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 20: [io 0xd060-0xd06f]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
Sep 02 13:13:37 sge00 kernel: ACPI: Enabled 1 GPEs in block 00 to 07
Sep 02 13:13:37 sge00 kernel: acpi root: \_SB_.PCI0 notify handler is installed
Sep 02 13:13:37 sge00 kernel: Found 1 acpi root devices
Sep 02 13:13:37 sge00 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep 02 13:13:37 sge00 kernel: vgaarb: loaded
Sep 02 13:13:37 sge00 kernel: vgaarb: bridge control possible 0000:00:02.0
Sep 02 13:13:37 sge00 kernel: PCI: Using ACPI for IRQ routing
Sep 02 13:13:37 sge00 kernel: PCI: pci_cache_line_size set to 64 bytes
Sep 02 13:13:37 sge00 kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Sep 02 13:13:37 sge00 kernel: e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
Sep 02 13:13:37 sge00 kernel: NetLabel: Initializing
Sep 02 13:13:37 sge00 kernel: NetLabel: domain hash size = 128
Sep 02 13:13:37 sge00 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Sep 02 13:13:37 sge00 kernel: NetLabel: unlabeled traffic allowed by default
Sep 02 13:13:37 sge00 kernel: Switching to clocksource refined-jiffies
Sep 02 13:13:37 sge00 kernel: pnp: PnP ACPI init
Sep 02 13:13:37 sge00 kernel: ACPI: bus type PNP registered
Sep 02 13:13:37 sge00 kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
Sep 02 13:13:37 sge00 kernel: pnp 00:01: [dma 4]
Sep 02 13:13:37 sge00 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Sep 02 13:13:37 sge00 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
Sep 02 13:13:37 sge00 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
Sep 02 13:13:37 sge00 kernel: pnp: PnP ACPI: found 4 devices
Sep 02 13:13:37 sge00 kernel: ACPI: bus type PNP unregistered
Sep 02 13:13:37 sge00 kernel: Switching to clocksource acpi_pm
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 2
Sep 02 13:13:37 sge00 kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
Sep 02 13:13:37 sge00 kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
Sep 02 13:13:37 sge00 kernel: TCP: Hash tables configured (established 16384 bind 16384)
Sep 02 13:13:37 sge00 kernel: TCP: reno registered
Sep 02 13:13:37 sge00 kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
Sep 02 13:13:37 sge00 kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 1
Sep 02 13:13:37 sge00 kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.0: Activating ISA DMA hang workarounds
Sep 02 13:13:37 sge00 kernel: pci 0000:00:02.0: Boot video device
Sep 02 13:13:37 sge00 kernel: PCI: CLS 0 bytes, default 64
Sep 02 13:13:37 sge00 kernel: Unpacking initramfs...
Sep 02 13:13:37 sge00 kernel: Freeing initrd memory: 2868k freed
Sep 02 13:13:37 sge00 kernel: platform rtc_cmos: registered platform RTC device (no PNP device found)
Sep 02 13:13:37 sge00 kernel: Scanning for low memory corruption every 60 seconds
Sep 02 13:13:37 sge00 kernel: audit: initializing netlink socket (disabled)
Sep 02 13:13:37 sge00 kernel: type=2000 audit(1378142015.246:1): initialized
Sep 02 13:13:37 sge00 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep 02 13:13:37 sge00 kernel: VFS: Disk quotas dquot_6.5.2
Sep 02 13:13:37 sge00 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 02 13:13:37 sge00 kernel: msgmni has been set to 4007
Sep 02 13:13:37 sge00 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Sep 02 13:13:37 sge00 kernel: io scheduler noop registered
Sep 02 13:13:37 sge00 kernel: io scheduler deadline registered
Sep 02 13:13:37 sge00 kernel: io scheduler cfq registered (default)
Sep 02 13:13:37 sge00 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 02 13:13:37 sge00 kernel: intel_idle: does not run on family 6 model 58
Sep 02 13:13:37 sge00 kernel: GHES: HEST is not enabled!
Sep 02 13:13:37 sge00 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Sep 02 13:13:37 sge00 kernel: Linux agpgart interface v0.103
Sep 02 13:13:37 sge00 kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Sep 02 13:13:37 sge00 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 02 13:13:37 sge00 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 02 13:13:37 sge00 kernel: mousedev: PS/2 mouse device common for all mice
Sep 02 13:13:37 sge00 kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Sep 02 13:13:37 sge00 kernel: rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
Sep 02 13:13:37 sge00 kernel: rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
Sep 02 13:13:37 sge00 kernel: cpuidle: using governor ladder
Sep 02 13:13:37 sge00 kernel: cpuidle: using governor menu
Sep 02 13:13:37 sge00 kernel: drop_monitor: Initializing network drop monitor service
Sep 02 13:13:37 sge00 kernel: TCP: cubic registered
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 10
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 17
Sep 02 13:13:37 sge00 kernel: Key type dns_resolver registered
Sep 02 13:13:37 sge00 kernel: PM: Hibernation image not present or could not be loaded.
Sep 02 13:13:37 sge00 kernel: registered taskstats version 1
Sep 02 13:13:37 sge00 kernel: Magic number: 13:139:238
Sep 02 13:13:37 sge00 kernel: rtc_cmos rtc_cmos: setting system clock to 2013-09-02 17:13:36 UTC (1378142016)
Sep 02 13:13:37 sge00 kernel: Freeing unused kernel memory: 1124k freed
Sep 02 13:13:37 sge00 kernel: Write protecting the kernel read-only data: 8192k
Sep 02 13:13:37 sge00 kernel: Freeing unused kernel memory: 1192k freed
Sep 02 13:13:37 sge00 kernel: Freeing unused kernel memory: 400k freed
Sep 02 13:13:37 sge00 systemd-udevd[45]: starting version 204
Sep 02 13:13:37 sge00 kernel: ACPI: bus type USB registered
Sep 02 13:13:37 sge00 kernel: usbcore: registered new interface driver usbfs
Sep 02 13:13:37 sge00 kernel: usbcore: registered new interface driver hub
Sep 02 13:13:37 sge00 kernel: SCSI subsystem initialized
Sep 02 13:13:37 sge00 kernel: ACPI: bus type ATA registered
Sep 02 13:13:37 sge00 kernel: usbcore: registered new device driver usb
Sep 02 13:13:37 sge00 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep 02 13:13:37 sge00 kernel: ohci_hcd 0000:00:06.0: OHCI Host Controller
Sep 02 13:13:37 sge00 kernel: ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
Sep 02 13:13:37 sge00 kernel: ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
Sep 02 13:13:37 sge00 kernel: libata version 3.00 loaded.
Sep 02 13:13:37 sge00 kernel: hub 1-0:1.0: USB hub found
Sep 02 13:13:37 sge00 kernel: hub 1-0:1.0: 8 ports detected
Sep 02 13:13:37 sge00 kernel: ahci 0000:00:0d.0: version 3.0
Sep 02 13:13:37 sge00 kernel: ahci: SSS flag set, parallel bus scan disabled
Sep 02 13:13:37 sge00 kernel: ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
Sep 02 13:13:37 sge00 kernel: ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
Sep 02 13:13:37 sge00 kernel: scsi0 : ahci
Sep 02 13:13:37 sge00 kernel: ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
Sep 02 13:13:37 sge00 kernel: ata_piix 0000:00:01.1: version 2.13
Sep 02 13:13:37 sge00 kernel: scsi1 : ata_piix
Sep 02 13:13:37 sge00 kernel: scsi2 : ata_piix
Sep 02 13:13:37 sge00 kernel: ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
Sep 02 13:13:37 sge00 kernel: ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Sep 02 13:13:37 sge00 kernel: ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
Sep 02 13:13:37 sge00 kernel: ata3.00: configured for UDMA/33
Sep 02 13:13:37 sge00 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 02 13:13:37 sge00 kernel: ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Sep 02 13:13:37 sge00 kernel: ata1.00: 167772160 sectors, multi 128: LBA48 NCQ (depth 31/32)
Sep 02 13:13:37 sge00 kernel: ata1.00: configured for UDMA/133
Sep 02 13:13:37 sge00 kernel: scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
Sep 02 13:13:37 sge00 kernel: scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] 167772160 512-byte logical blocks: (85.8 GB/80.0 GiB)
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 02 13:13:37 sge00 kernel: sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
Sep 02 13:13:37 sge00 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 02 13:13:37 sge00 kernel: sr 2:0:0:0: Attached scsi CD-ROM sr0
Sep 02 13:13:37 sge00 kernel: sda: sda1
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Sep 02 13:13:37 sge00 kernel: usb 1-1: new full-speed USB device number 2 using ohci_hcd
Sep 02 13:13:37 sge00 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Sep 02 13:13:37 sge00 systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Sep 02 13:13:37 sge00 systemd[1]: Detected virtualization 'oracle'.
Sep 02 13:13:37 sge00 systemd[1]: Set hostname to <sge00>.
Sep 02 13:13:37 sge00 systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Starting Remote File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Remote File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Expecting device sys-subsystem-net-devices-enp0s3.device...
Sep 02 13:13:37 sge00 systemd[1]: Starting Delayed Shutdown Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on Delayed Shutdown Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting Device-mapper event daemon FIFOs.
Sep 02 13:13:37 sge00 systemd[1]: Listening on Device-mapper event daemon FIFOs.
Sep 02 13:13:37 sge00 systemd[1]: Starting LVM2 metadata daemon socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on LVM2 metadata daemon socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Sep 02 13:13:37 sge00 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Sep 02 13:13:37 sge00 systemd[1]: Starting Encrypted Volumes.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Encrypted Volumes.
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Kernel Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on udev Kernel Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Control Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on udev Control Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Sep 02 13:13:37 sge00 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Sep 02 13:13:37 sge00 systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Starting Paths.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Paths.
Sep 02 13:13:37 sge00 systemd[1]: Starting Journal Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on Journal Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting Load Kernel Modules...
Sep 02 13:13:37 sge00 systemd[1]: Starting Setup Virtual Console...
Sep 02 13:13:37 sge00 systemd[1]: Started Set Up Additional Binary Formats.
Sep 02 13:13:37 sge00 systemd[1]: Starting Apply Kernel Variables...
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Coldplug all Devices...
Sep 02 13:13:37 sge00 systemd[1]: Starting Create static device nodes in /dev...
Sep 02 13:13:37 sge00 systemd[1]: Mounting POSIX Message Queue File System...
Sep 02 13:13:37 sge00 systemd[1]: Starting Journal Service...
Sep 02 13:13:37 sge00 systemd[1]: Started Journal Service.
Sep 02 13:13:37 sge00 systemd[1]: Mounting Debug File System...
Sep 02 13:13:37 sge00 systemd[1]: Mounting Huge Pages File System...
Sep 02 13:13:37 sge00 systemd[1]: Started File System Check on Root Device.
Sep 02 13:13:37 sge00 systemd[1]: Starting Remount Root and Kernel File Systems...
Sep 02 13:13:37 sge00 systemd[1]: Started Setup Virtual Console.
Sep 02 13:13:37 sge00 systemd[1]: Started Create static device nodes in /dev.
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Kernel Device Manager...
Sep 02 13:13:37 sge00 kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Sep 02 13:13:37 sge00 kernel: FS-Cache: Loaded
Sep 02 13:13:37 sge00 kernel: RPC: Registered named UNIX socket transport module.
Sep 02 13:13:37 sge00 kernel: RPC: Registered udp transport module.
Sep 02 13:13:37 sge00 kernel: RPC: Registered tcp transport module.
Sep 02 13:13:37 sge00 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 02 13:13:37 sge00 systemd-journal[98]: Journal started
Sep 02 13:13:37 sge00 systemd[1]: Started Apply Kernel Variables.
Sep 02 13:13:37 sge00 systemd[1]: Mounted POSIX Message Queue File System.
Sep 02 13:13:37 sge00 systemd[1]: Mounted Debug File System.
Sep 02 13:13:37 sge00 systemd[1]: Mounted Huge Pages File System.
Sep 02 13:13:37 sge00 systemd[1]: Started Remount Root and Kernel File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Starting Load Random Seed...
Sep 02 13:13:37 sge00 systemd[1]: Activating swap /swapfile...
Sep 02 13:13:37 sge00 systemd[1]: Started udev Coldplug all Devices.
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'nfs'
Sep 02 13:13:37 sge00 kernel: FS-Cache: Netfs 'nfs' registered for caching
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'vboxguest'
Sep 02 13:13:37 sge00 kernel: input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input1
Sep 02 13:13:37 sge00 kernel: vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
Sep 02 13:13:37 sge00 kernel: vboxguest: Successfully loaded version 4.2.16_OSE (interface 0x00010004)
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'vboxsf'
Sep 02 13:13:37 sge00 kernel: vboxsf: Successfully loaded version 4.2.16_OSE (interface 0x00010004)
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'vboxvideo'
Sep 02 13:13:37 sge00 systemd[1]: Started Load Kernel Modules.
Sep 02 13:13:37 sge00 systemd[1]: Mounting Configuration File System...
Sep 02 13:13:37 sge00 kernel: [drm] Initialized drm 1.1.0 20060810
Sep 02 13:13:37 sge00 kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Sep 02 13:13:37 sge00 kernel: [drm] No driver support for vblank timestamp query.
Sep 02 13:13:37 sge00 kernel: [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
Sep 02 13:13:37 sge00 systemd[1]: Mounted FUSE Control File System.
Sep 02 13:13:37 sge00 systemd[1]: Started udev Kernel Device Manager.
Sep 02 13:13:37 sge00 systemd[1]: Starting Local File Systems (Pre).
Sep 02 13:13:37 sge00 systemd-udevd[106]: starting version 204
Sep 02 13:13:37 sge00 systemd[1]: Reached target Local File Systems (Pre).
Sep 02 13:13:37 sge00 systemd[1]: Mounting RPC pipe filesystem...
Sep 02 13:13:37 sge00 systemd[1]: Starting Local File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Local File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Starting Recreate Volatile Files and Directories...
Sep 02 13:13:37 sge00 systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
Sep 02 13:13:37 sge00 systemd[1]: Mounted RPC pipe filesystem.
Sep 02 13:13:37 sge00 systemd[1]: Mounted Configuration File System.
Sep 02 13:13:37 sge00 systemd[1]: Started Load Random Seed.
Sep 02 13:13:37 sge00 systemd-journal[98]: Allowing system journal files to grow to 4.0G.
Sep 02 13:13:37 sge00 systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Sep 02 13:13:37 sge00 systemd[1]: Started Recreate Volatile Files and Directories.
Sep 02 13:13:37 sge00 systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
Sep 02 13:13:37 sge00 systemd[1]: Started Update UTMP about System Reboot/Shutdown.
Sep 02 13:13:37 sge00 systemd[1]: Activated swap /swapfile.
Sep 02 13:13:37 sge00 systemd[1]: Starting Swap.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Swap.
Sep 02 13:13:37 sge00 systemd[1]: Starting System Initialization.
Sep 02 13:13:37 sge00 systemd[1]: Reached target System Initialization.
Sep 02 13:13:37 sge00 systemd[1]: Starting D-Bus System Message Bus Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on D-Bus System Message Bus Socket.
Sep 02 13:13:38 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:38 sge00 swapon[116]: swapon: /swapfile: insecure permissions 0777, 0600 suggested.
Sep 02 13:13:38 sge00 kernel: ACPI: AC Adapter [AC] (on-line)
Sep 02 13:13:37 sge00 sshd[155]: Server listening on 0.0.0.0 port 22.
Sep 02 13:13:37 sge00 sshd[155]: Server listening on :: port 22.
Sep 02 13:13:37 sge00 slapd[156]: @(#) $OpenLDAP: slapd 2.4.35 (May 20 2013 16:33:13) $
Sep 02 13:13:37 sge00 slapd[168]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Sep 02 13:13:37 sge00 slapd[168]: slapd starting
Sep 02 13:13:38 sge00 kernel: parport_pc 00:03: reported by Plug and Play ACPI
Sep 02 13:13:38 sge00 kernel: input: PC Speaker as /devices/platform/pcspkr/input/input2
Sep 02 13:13:38 sge00 kernel: microcode: CPU0 sig=0x306a9, pf=0x1, revision=0x0
Sep 02 13:13:38 sge00 kernel: microcode: CPU1 sig=0x306a9, pf=0x1, revision=0x0
Sep 02 13:13:38 sge00 kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Sep 02 13:13:38 sge00 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep 02 13:13:38 sge00 kernel: ACPI: Battery Slot [BAT0] (battery present)
Sep 02 13:13:38 sge00 kernel: ACPI: Power Button [PWRF]
Sep 02 13:13:38 sge00 CLCGenomicsServer[163]: Starting CLCGenomicsServer
Sep 02 13:13:38 sge00 kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
Sep 02 13:13:38 sge00 slim[166]: /usr/bin/xauth: file /var/run/slim.auth does not exist
Sep 02 13:13:38 sge00 slim[166]: X.Org X Server 1.14.2
Sep 02 13:13:38 sge00 slim[166]: Release Date: 2013-06-25
Sep 02 13:13:38 sge00 slim[166]: X Protocol Version 11, Revision 0
Sep 02 13:13:38 sge00 slim[166]: Build Operating System: Linux 3.9.7-1-ARCH x86_64
Sep 02 13:13:38 sge00 slim[166]: Current Operating System: Linux sge00 3.10.10-1-ARCH #1 SMP PREEMPT Fri Aug 30 11:30:06 CEST 2013 x86_64
Sep 02 13:13:38 sge00 slim[166]: Kernel command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 02 13:13:38 sge00 slim[166]: Build Date: 01 July 2013 10:48:42AM
Sep 02 13:13:38 sge00 slim[166]: Current version of pixman: 0.30.2
Sep 02 13:13:38 sge00 slim[166]: Before reporting problems, check http://wiki.x.org
Sep 02 13:13:38 sge00 slim[166]: to make sure that you have the latest version.
Sep 02 13:13:38 sge00 slim[166]: Markers: (--) probed, (**) from config file, (==) default setting,
Sep 02 13:13:38 sge00 slim[166]: (++) from command line, (!!) notice, (II) informational,
Sep 02 13:13:38 sge00 slim[166]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Sep 02 13:13:38 sge00 slim[166]: (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 2 13:13:37 2013
Sep 02 13:13:38 sge00 slim[166]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension Generic Event Extension
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension SHAPE
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension MIT-SHM
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XInputExtension
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XTEST
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension BIG-REQUESTS
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension SYNC
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XKEYBOARD
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XC-MISC
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension SECURITY
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XINERAMA
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFIXES
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension RENDER
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension RANDR
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension COMPOSITE
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DAMAGE
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension MIT-SCREEN-SAVER
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DOUBLE-BUFFER
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension RECORD
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DPMS
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension X-Resource
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XVideo
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XVideo-MotionCompensation
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFree86-VidModeExtension
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFree86-DGA
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFree86-DRI
Sep 02 13:13:38 sge00 kernel: ACPI: Sleep Button [SLPF]
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DRI2
Sep 02 13:13:38 sge00 slim[166]: Loading extension GLX
Sep 02 13:13:38 sge00 kernel: hidraw: raw HID events driver (C) Jiri Kosina
Sep 02 13:13:38 sge00 kernel: ppdev: user-space parallel port driver
Sep 02 13:13:38 sge00 kernel: usbcore: registered new interface driver usbhid
Sep 02 13:13:38 sge00 kernel: usbhid: USB HID core driver
Sep 02 13:13:38 sge00 kernel: input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input5
Sep 02 13:13:38 sge00 kernel: hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
Sep 02 13:13:38 sge00 kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Sep 02 13:13:38 sge00 kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
Sep 02 13:13:38 sge00 kernel: Adding 1048572k swap on /swapfile. Priority:-1 extents:5 across:1105916k FS
Sep 02 13:13:38 sge00 kernel: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
Sep 02 13:13:38 sge00 systemd-logind[158]: Watching system buttons on /dev/input/event3 (Power Button)
Sep 02 13:13:38 sge00 systemd-logind[158]: Watching system buttons on /dev/input/event4 (Sleep Button)
Sep 02 13:13:38 sge00 kernel: e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:3d:4f:34
Sep 02 13:13:38 sge00 kernel: e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
Sep 02 13:13:38 sge00 systemd[1]: Found device PRO/1000 MT Desktop Adapter.
Sep 02 13:13:38 sge00 systemd[1]: Starting dhcpcd on enp0s3...
Sep 02 13:13:38 sge00 systemd-udevd[128]: renamed network interface eth0 to enp0s3
Sep 02 13:13:38 sge00 sgeexecd[161]: starting sge_execd
Sep 02 13:13:38 sge00 dhcpcd[239]: version 6.0.5 starting
Sep 02 13:13:38 sge00 kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
Sep 02 13:13:38 sge00 kernel: e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Sep 02 13:13:38 sge00 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
Sep 02 13:13:38 sge00 sgemaster[162]: starting sge_qmaster
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: soliciting an IPv6 router
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: rebinding lease of 192.168.1.10
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: carrier lost
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: carrier acquired
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: soliciting an IPv6 router
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: rebinding lease of 192.168.1.10
Sep 02 13:13:39 sge00 slim[166]: pam_unix(slim:session): session opened for user sgeuser by (uid=0)
Sep 02 13:13:39 sge00 systemd-logind[158]: New session 1 of user sgeuser.
Sep 02 13:13:39 sge00 systemd-logind[158]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Sep 02 13:13:40 sge00 slim[166]: /usr/bin/xauth: file /home/sgeuser/.Xauthority does not exist
Sep 02 13:13:40 sge00 slim[166]: /home/sgeuser/.xinitrc: line 18: FontPath: command not found
Sep 02 13:13:40 sge00 slim[166]: openbox: error while loading shared libraries: librsvg-2.so.2: cannot open shared object file: No such file or directory
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: leased 192.168.1.10 for 86400 seconds
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: adding host route to 192.168.1.10 via 127.0.0.1
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: adding route to 192.168.1.0/24
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: adding default route via 192.168.1.1
Sep 02 13:13:44 sge00 dhcpcd[239]: forked to background, child pid 648
Sep 02 13:13:44 sge00 systemd[1]: Started dhcpcd on enp0s3.
Sep 02 13:13:44 sge00 systemd[1]: Starting Network.
Sep 02 13:13:44 sge00 systemd[1]: Reached target Network.
Sep 02 13:13:44 sge00 systemd[1]: Starting RPC Bind...
Sep 02 13:13:44 sge00 systemd[1]: Starting Apache Web Server...
Sep 02 13:13:44 sge00 systemd[1]: Started RPC Bind.
Sep 02 13:13:44 sge00 systemd[1]: Starting NFS server...
Sep 02 13:13:44 sge00 apachectl[650]: httpd: Could not reliably determine the server's fully qualified domain name, using 192.168.1.10 for ServerName
Sep 02 13:13:44 sge00 systemd[1]: Starting RPC Port Mapper.
Sep 02 13:13:44 sge00 systemd[1]: Reached target RPC Port Mapper.
Sep 02 13:13:44 sge00 systemd[1]: Starting RPC GSS-API client-side daemon...
Sep 02 13:13:44 sge00 systemd[1]: Started RPC GSS-API client-side daemon.
Sep 02 13:13:44 sge00 kernel: Installing knfsd (copyright (C) 1996 [email protected]).
Sep 02 13:13:44 sge00 kernel: NFSD: starting 90-second grace period (net ffffffff81893040)
Sep 02 13:13:44 sge00 systemd[1]: Started NFS server.
Sep 02 13:13:44 sge00 systemd[1]: Starting NFS Mount Daemon...
Sep 02 13:13:44 sge00 systemd[1]: Starting NFSv4 ID-name mapping daemon...
Sep 02 13:13:44 sge00 systemd[1]: Started NFSv4 ID-name mapping daemon.
Sep 02 13:13:44 sge00 rpc.mountd[682]: Version 1.2.8 starting
Sep 02 13:13:44 sge00 systemd[1]: Started NFS Mount Daemon.
Sep 02 13:13:45 sge00 systemd[1]: PID file /run/httpd/httpd.pid not readable (yet?) after start.
Sep 02 13:13:45 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:45 sge00 systemd[1]: Starting SGE Execution Daemon...
Sep 02 13:13:45 sge00 lmx-serv-clcbio[690]: LM-X License Server v3.6.1 (Linux_x64)
Sep 02 13:13:45 sge00 lmx-serv-clcbio[690]: Copyright (C) 2002-2010 X-Formation. All rights reserved.
Sep 02 13:13:45 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:45 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:46 sge00 systemd[1]: Started Apache Web Server.
Sep 02 13:13:46 sge00 systemd[1]: Starting Multi-User System.
Sep 02 13:13:46 sge00 systemd[1]: Reached target Multi-User System.
Sep 02 13:13:46 sge00 systemd[1]: Starting Graphical Interface.
Sep 02 13:13:46 sge00 systemd[1]: Reached target Graphical Interface.
Sep 02 13:13:46 sge00 systemd[1]: Startup finished in 1.441s (kernel) + 8.969s (userspace) = 10.410s.
Sep 02 13:13:48 sge00 slapd[168]: conn=1000 fd=10 ACCEPT from IP=192.168.1.10:47238 (IP=0.0.0.0:389)
Sep 02 13:13:48 sge00 slapd[168]: conn=1000 op=0 BIND dn="" method=128
Sep 02 13:13:48 sge00 slapd[168]: conn=1000 op=0 RESULT tag=97 err=0 text=
Sep 02 13:13:51 sge00 dhcpcd[648]: enp0s3: no IPv6 Routers available
Sep 02 13:14:10 sge00 kernel: VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff88007b747810), OR(0x0), NOT(0xffffffff), flags(0x0)
Sep 02 13:14:50 sge00 su[755]: (to sgeuser) sgeuser on none
Sep 02 13:14:50 sge00 su[755]: pam_unix(su-l:session): session opened for user root by sgeuser(uid=1000)
Sep 02 13:19:33 sge00 kernel: hrtimer: interrupt took 1387321 ns
Sep 02 13:28:35 sge00 systemd[1]: Starting Cleanup of Temporary Directories...
Sep 02 13:28:35 sge00 systemd[1]: Started Cleanup of Temporary Directories.
Sep 02 14:39:38 sge00 su[755]: pam_unix(su-l:session): session closed for user root
Sep 02 14:44:39 sge00 su[807]: (to sgeuser) sgeuser on none
Sep 02 14:44:39 sge00 su[807]: pam_unix(su-l:session): session opened for user root by sgeuser(uid=1000)
Sep 02 14:46:34 sge00 rpc.mountd[682]: authenticated mount request from 192.168.1.162:1022 for /opt/gridengine/sge (/opt/gridengine/sge)
Last edited by teetee1 (2013-09-02 19:34:30)

Thanks. The problem is solved.
Both openbox and lxsession were installed. The only thing missing was the missing libsvg library. Here is the relevant entries in /var/log/pacman.log (when I installed the libsvg package just now)
# egrep -ri svg /var/log/pacman.log
[2013-09-02 14:52] [PACMAN] Running 'pacman --color auto -S extra/librsvg'
[2013-09-02 14:52] [PACMAN] installed librsvg (1:2.37.0-1)
so somehow it wasn't needed on a working lxde since 08/28 when the system was installed, and right after 3.10.10 kernel upgrade(Sat., 8/31), it is required to have the windows manager working properly. 3.10.10 linux kernel change log from https://www.kernel.org/pub/linux/kernel … og-3.10.10 did not return anything relevant.
Anyway thanks for the input and I'm glad that the problem was solved quickly.
Last edited by teetee1 (2013-09-02 19:36:39)

Screen Sharing and CMD+Tab

Hi,
yes, my problem is solved. CMD+Tab now works within the screen you are sharing!
But, now of course, there's another issue. How to leave the shared screen using the keyboard? Meaning, how can I switch controls back to my own Mac using the keyboard.
Using the mouse works! But as a geek, I often prefer the keyboard.
Regards,
Roger

Before the cmd-tab was sent through to the remote computer I installed a control panel called liteswitch X which allows you to map alt-tab to switch apps. If installed on main computer, you could probably switch away from the screen sharing window with an alt-tab. However, I would really like to switch off the cmd-tab being sent to remote and the fix for ARD 3.3 (defaults write com.apple.RemoteDesktop DoNotSendSystemKeys -bool YES) does NOT work for me.
anyone ?

Microsoft Excel 2010 alt-tab causes part of screen to freeze

One of my clients is having the issue above. When he opens 2 different Excel applications, and starts doing usual work, which involves copy-paste from one Excel to the other one, and changes between them using alt-tab, then all of a sudden part of one Excels
screen freezes and you can see the cells being at the wrong place. When you minimize the window and then come back to it, then it's fixed, or when you scroll down and back up it will fix itself. I have found other people having the same problem on the forum,
but the only thing I haven't tried is getting a new graphics card installed instead of the Intel HD one. I even tried uninstalling the Intel HD driver, letting Windows use some default driver, but the problem persisted even then.
The machine has Windows 7 installed, Office 2010. Hardware is standard Lenovo T420.
Since I've tried everything and the problem is still not fixed I'm hoping for some more ideas.
PS: I'm 100% sure not using alt-tab would fix the issue, or reverting to Office 2007, but those fixes are not acceptable for my client.

check out thread below, it suggests this thing:
I experienced the exact thing you are describing and it was very annoying. I eventually found an
option under File - Options - Advanced, in the Display category, called "Show all windows in the Taskbar". Uncheck this and alt-tab will stop trying to interpret each spreadsheet in the same instance of Excel as a different application. Then
to switch between spreadsheets in the same excel instance, use ctrl-tab instead.
https://social.technet.microsoft.com/Forums/windows/en-US/c3e73faf-81fa-425a-95d7-d33219d8ff02/multiple-instances-of-the-same-excel-document-in-alttab-list?forum=w7itproui
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Windows 7 taskbar feature - tabs as individual taskbar items.

Just like for IE8, the Win7 Taskbar treats each Safari tab as it's individual item.
Is there anyway to turn this feature off?

Darin.K wrote:
LabVIEW has always played by its own rules when it comes to window behavior, from Alt+Tab to live clicks in windows without focus. I have just started using Windows 7 at home with LV9.0.1 and it seems to me that LV is not playing nicely with the new Windows Taskbar. If I have a window minimized and I hover over the LV icon I get the nice thumbnail previews, but if I try to click one of the thumbnails I get a 'dong' and no window. I have to get the thumbnail then right-click and restore. Or I can shift-right-click and restore all (sometimes). A window that is not minimized is brought to the front properly from the thumbnail.
This is fresh SP1 install on a relatively fresh Windows 7 32-bit system. I hope this is not the usual behavior, it is getting on my nerves as some of these maneuvers are spinal reflexes at this point. Other applications behave as I would expect and so does the LV splash screen.
We have a Task timer we use internally to track our time on projects that i recently re-wrote for LV 2009. It inserts itself in the system tray fine under XP but on Windows 7, I have recieved reports of it not "coming to the front" and the user has to close all other windows to find it.
Note: this has only been seen when running as an exe.
I have not had a chance to chse that down.
Now if you are talking about the development environment... then I can't say I have seen that issue.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Removing Windows Components and controlling start location

I'm wanting to do a interactive application that is fullscreen across two monitors. I know that invoking the normal fullscreen procedure will defult the the fullscreen to only the main monitor. I was wondering if there was a way around this. Like, if I removed the windows borders and flash toolbar from the application, set the initial window location to start at (0,0) and then set the stage size to the resolution of the two monitors horizontal resollution compined. Is that possible, and if so what the things(terms,methods) I new to start looking at.
Thanks,
Joe

You cannot do that with browser or projector (unless you use a third party projector) but you can with AIR. There was a discussion about this so if you search the archive you should be able to find it
Kenneth Kawamoto
http://www.materiaprima.co.uk/

[SOLVED] Customizing alt+tab menu in Openbox

I tried to change a little bit the openbox alt+tab menu, and I have some questions, but first things first. This is my current menu:
What I want is:
1. number of columns -- I wanted to set, for example, 10 columns for the menu.
2. icon size -- Can I make them smaller or bigger?
3. mouse support -- you know, I press alt+tab and choose an icon.
4. Is there a way to group desktop apps? For instance, I have 5 apps in 1st desktop and 3 apps in 2nd desktop. When I press alt+tab, I want to see in the first row apps from desktop1 and in the second row apps from desktop2, etc.
Last edited by morfik (2013-06-11 15:05:07)

Finally, I've found it -- https://aur.archlinux.org/packages/xwinmosaic-git/
It has a mouse support, and it is possible to change icon size as well as box width and height. Also, there are some other features, but there is one thing that I want to remove:
As you can see, it also shows the windows which are in the background, like conky, etc.
Ignoring this little annoying thing, It is basically what I want.

[SOLVED] openbox window borders and alt tab

Similar Messages

Maybe you are looking for