[SOLVED] Oxygen widget style missing/broken after KDE 4.8.0 to 4.8.1

hi all,
(I'm was not sure where to place this thread so please forgive me if I should have placed in somewhere else :-))
Today I upgraded my KDE to 4.8.1 and now I'm missing the Oxygen widget style. I tried reinstalling kdebase and kde-workspace and I even uninstalled all of kde, followed by installing kde-meta (previously I had the "kde" package installed).
Since there is no "oxygen" package (or at least I couldn't find it) I'm really stuck here. I also couldn't find anything related in the forums, like issues from previous upgrades.
I made two screenshots. At [1] you see that only unthemed widget styles are available. At [2] you see that also GTK apps like firefox have lost their theming although oxygen-gtk is installed.
I'd appreciate any help!
cheers
[1] http://imagepaste.nullnetwork.net/viewimage.php?id=3456
[2] http://imagepaste.nullnetwork.net/viewimage.php?id=3457
Last edited by Kei (2012-03-09 12:03:04)

Thanks for your replies!
bash wrote:See https://wiki.archlinux.org/index.php/Un … oxygen-gtk
Sorry, I shouldn't have posted that firefox screenshot. What I meant was that GTK applications are not themed as well. However, the main issue here is that there seems to be no theming at all, e.g., oxygen is not available for Qt applications (only built-in styles selectable, as shown in the first screenshot).
the_easterbunny wrote:I had the same problem. It seems that KDE ignores the "old" oxygen.so file. Moving /usr/lib/kde4/plugins/styles/oxygen.so to /usr/lib/kde4/plugins/styles/oxygen2.so solved it for me - however, it is only a workaround for that strange problem.
I have just tried to symlink the oxygen.so file to oxygen2.so, but unfortunately that hasn't changed anything.
additional info: I did a fresh install of the system on wednesday with KDE 4.8.0. I didn't have any problems with oxygen or theming back then. I also tried removing ~/.kde4.
EDIT: note that I'm in a full KDE session and QT_PLUGIN_PATH is set to $HOME/.kde4/lib/kde4/plugins/:/usr/lib/kde4/plugins/
EDIT2: I just reported it as a bug -- https://bugs.archlinux.org/index.php?do … k_id=28838
EDIT3: It turned out it is indeed a configuration error. To anyone having this issue: delete ~/.config/Trolltech.conf
Last edited by Kei (2012-03-09 12:02:08)

Similar Messages

ARD 3.4 - Dashboard Widget says Missing Plugin after successful download

Downloaded and successfully installed 3.4 for ARD (Admin). Downloaded and successfully installed 10.6.6 (App store, etc.). Downloaded and successfully installed ARD 3.4 Widget for Dashboard. When I got to add to Dashboard, Icon is there, but it says Missing Plugin.

Jimmy,
Looks like you're in luck. I was in the middle of updating some of my other machines and noticed that there was a new version of the widget installer posted. After installing, I didn't need to remove any of my widgets for the ARD widget to work again.
Try installing it and see if it works for you. http://support.apple.com/downloads/DL1351/en_US/RemoteDesktopWidget.dmg
Cheers,
-Tim

[solved] ams bibtex styles missing aber texlive-core uprade

Hi,
The new texlive-core 2009.14682-1 package does not include the ams bibtex styles amsalpha.bst, ams.bst.
Any idea where I can find them now?
solved: new version of texlive-core now includes these files
Last edited by alexod (2009-09-13 10:06:43)

Hi djszapi,
the AL-package texlive-core does not contain ams.bst and amsalpha.bst.
I suppose they should be in the texlive-core package as it contains other file of AMStex, the files had been present in the last version and the wiki pages state that it should be in this package.
The files may have move to another AL-package, but I could not find any other.

[SOLVED] Thinkpad T430 brightness keys broken after firmware upgrade

Hi.
I've upgraded the firmware on my Thinkpad to version 2.51. Since that I'm unable to change the display brightness via the Fn-Keys on the keyboard. What still works is writing values to /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0/brightness but of course that's not how it should be.
Here's some dmesg output:
[ 7.638814] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 7.638816] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.638817] thinkpad_acpi: ThinkPad BIOS G1ET91WW (2.51 ), EC unknown
[ 7.638818] thinkpad_acpi: Lenovo ThinkPad T430, model 2349D15
[ 7.639440] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 7.639547] thinkpad_acpi: radio switch found; radios are enabled
[ 7.639558] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 7.639559] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 7.640708] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 7.641012] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 7.641156] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
Any idea why it's broken and how it can be fixed?
Thanks,
Julian
Last edited by julian24 (2013-03-21 22:06:20)

Awesome, the acpi_backlight=vendor kernel command line parameter actually fixed it.
Does anybody know what exactly has changed and why this in necessary now?
Update: If you do this, you'll get error messages like this in your log/dmesg every time you press a brightness key:
kernel: thinkpad_acpi: unknown possible thermal alarm or keyboard event received
kernel: thinkpad_acpi: unhandled HKEY event 0x6050
kernel: thinkpad_acpi: please report the conditions when this event happened to [email protected]
The kernel command line parameter acpi_osi="!Windows 2012" also works and seems to be the better way to fix this.
Bugreport at kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=51231
tl;dr: Firmware update introduced 101 brightness levels even though the hardware only supports 16 but Windows 8 requires this. Reducing or increasing the brightness by one doesn't change anything at all so the firmware will still report the old value as the new brightness thus it'll never actually change the brightness. But if you explicitly tell the firmware that you're not Windows 8, it will only report 16 brightness levels and everything works fine. Lenovo, seriously?
Last edited by julian24 (2013-03-21 23:27:47)

[SOLVED] nfsroot install broken after kernel upgrade 3.5.6 to 3.6.2

It seems my nfsroot installations have broken after the kernel upgrade to 3.6.2.
This is as far as the boot process gets now (hand copied from the screen):
IP-Config: eth0 complete (from 10.48.50.20):
address: 10.48.50.240 broadcast: 10.48.50.255 netmask: 255.255.255.0
gateway: 0.0.0.0 dns0 : 0.0.0.0 dns1: 0.0.0.0
domain : local
rootserver: 10.48.50.20 rootpath:
filename : /var/tftpboot/pxelinux.0
NFS-Mount: 10.48.50.20:/srv/nfs4/kvmhost0-rootfs
Waiting 10 seconds for device /dev/nfs ...
mount: Protocol not supported
:: running cleanup hook [udev]
ERROR: Failed to mount the real root device.
Bailing out, you are on your own. Good luck.
sh: can't access tty; job control turned off
[rootfs /]#
On the server this is what is logged:
Oct 16 21:10:04 tuon dhcpd: DHCPDISCOVER from 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPOFFER on 10.48.50.240 to 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPREQUEST for 10.48.50.240 (10.48.50.20) from 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPACK on 10.48.50.240 to 00:21:70:eb:02:25 via san
Oct 16 21:10:14 tuon rpc.mountd[1323]: authenticated mount request from 10.48.50.240:684 for /srv/nfs4/kvmhost0-rootfs (/srv/nfs4/kvmhost0-rootfs)
Oct 16 21:10:14 tuon rpc.mountd[1323]: refused unmount request from 10.48.50.240 for /new_root (/): not exported
It looks to me like the client is sending the mount request, the server accepts and then for some reason the client thinks it has failed. I can't even see anything strange in the wireshark traces comparing the working client (3.5.6) to the broken one (3.6.2).
Anyone else using nfsroot successfully with the latest kernel?
Any other ideas?
(by the way - despite my directory names, this is using nfs v3 for the rootfs)
Last edited by kmshanah (2012-10-18 03:18:07)

mikep wrote:
Just to confirm that I also have this problem with nfsroot (nfs4 this time) with 3.6.2. Downgrading the kernel does make it go away.
When it is working normally I do seem to get refused unmount messages at shutdown for some reason
refused unmount request from 192.168.1.86 for / (/): not exported
, but the /new_root bit is new and I have no idea where it comes from.
refused unmount request from 192.168.1.86 for /new_root (/): not exported
So I wonder if it asking for the wrong path.
That unmount issue will be solved by FS#32021.
Unfortunately, that doesn't help with mounting in the first place with 3.6.2

How to reset widget style in KDE4?

I either need to know what program to launch the system settings program, or what file to delete to set the widget style back to Oxygen. I have it set as GTK+ and it is segfaulting so I can't get to my desktop. Anyone know? Changing it in qtconfig doesn't help.

The Orange Peanut wrote:I either need to know what program to launch the system settings program, or what file to delete to set the widget style back to Oxygen. I have it set as GTK+ and it is segfaulting so I can't get to my desktop. Anyone know? Changing it in qtconfig doesn't help.
Just changing widgetStyle will not help in your case. The QGtkStyle is broken at the moment and it reports that qt-gtk engine is installed even if it's not. So all your apps are now segfaulting. You can't change it back, not with qtconfig not trough some config file. However this should help you reset your widget style, let me know how it went:
$ cd && export GTK2_RC_FILES="`pwd`/.gtkrc-2.0" && systemsettings

Kate always open files in a new window after kde upgrade

kate always open files in a new window, instead of the existing window as a new document after kde upgrade to 3.5. someone else have the same experience and have a solution for that ?
cheers,
notz

The problem is solved!
Apparently the Content Disposition: Attachment in the BLOB Download Format Mask does the trick.
For some reason I have to logout and login again in the application to see the change.
I tried changing the Content Disposition to Inline and then back to Attachment, and the file keeps opening in the same window unless I start a new session.
Is there any explanation why it is working that way?
Thanks!
Erick

Various missing drivers after re-installing Win7 64 bit on hp pavilion dv7-6111eo

Aloha
First off... I'm no techy, geek or nerd... And I mean those words in the best way, to those who are.
In this case You need to see me like a kid in kindergarden, being taken by the hand, and being shown what to do, down the the last detail. Sad but true.
Without me knowing why, I experienced missing several DLL-files, and often got error messages about those.
A pain in the neck, so I re-installed Windows 7 64 bit, as I didn't want to mess with those DLLs missing.
After that re-installing, I couldn't get internet-connection to my router. Luckily I have a 10+ year old stationary, where I after some time found the driver I needed, so that works now.
But now it seems there's several other drivers missing/not been installed.
I got a little info, from another post, what to provide with info, and hope that will be enough. if not, then please let me know the additional info that may be needed, and where I can find those on my PC, so I can provide these.
Missing drivers:
Network Controller;
Hardware ID: PCI\VEN_8086&DEV_008B&SUBSYS_53158086&REV_34
SM Bus Controller;
Hardware ID: PCI\VEN_8086&DEV_1C22&SUBSYS_1659103C&REV_05
Universal Serial Bus (USB) Controller;
Hardware ID: PCI\VEN_1033&DEV_0194&SUBSYS_1659103C&REV_04
I have 4 USB-ports, but only one will work, the others don't respond, and I need all four running at the same time. Plus I'd like to have everything in order after I had to re-install Win 7.
I thank You in advance for any and every help I can get. Just have in mind, that I need the things carved into paper.
This question was solved.
View Solution.

Hi:
You need these drivers...
SM Bus Controller; Install this first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&dlc=en&lc=en...
Network Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&dlc=en&lc=en&...
Universal Serial Bus (USB) Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&dlc=en&lc=en...
You will also need this bluetooth driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&dlc=en&lc=en&...

[SOLVED] Krita complains about missing lcms

When I start Krita (before and after KDE 4.4 udpate) I get the same error message:
The KOffice LittleCMS color management plugin is not installed. Krita will quit now.
I do have lcms installed. When I start showfoto, I can enable color management just fine.
Any idea?
Thanks
Alphazo
[EDIT] Solution in the bug report http://bugs.archlinux.org/task/19621
Basically sudo pacman -S koffice-plugins did the trick.
Last edited by alphazo (2010-06-03 13:08:06)

It's okay, I figured it out. I was following this guide, in the hope it would eliminate the need for me to understand how exim configuration hangs together (I'm used to the simpler Debian exim4 template configuration). However, it seems after reading the configuration file and noticing the configuration sections, I merely placed the gmail_relay in the wrong section. Moving into the correct section has solved the problem.

[SOLVED] Libreoffice Impress - Horizontal Scroll Broken

So Libreoffice Impress on my setup, even before the big upgrade to 3.4.2, has had this issue where the slide viewer portion of the window actually overlaps the horizontal scroll bar and buttons, which makes them unusable. I don't know if this is an issue with my DE or if it's an upstream problem, but it's ugly and frustrating when trying to work on something big like a poster. Right now, the issue shows up with KDE 4.7, I can't remember if I tried this with GNOME 3.
Here's a picture of the problem:
http://postimage.org/image/31eqjbb50/
Suggestions are appreciated.
Last edited by Deemoney14 (2011-08-07 15:31:20)

I had this too and solved it (search on this forum after reading this).
It Is caused by native libreoffice.org QT4 integration, which is flaky.
Install and use the gnome integration package libreoffice-gnome.
Not sure if you also need libreoffice-kde4 (for the kde4 file dialogs)
I just installed both of these packages.
And add this line to your /usr/bin/soffice
export OOO_FORCE_DESKTOP=gnome soffice
This forces libreoffice to always use above settings.
But the file /usr/bin/soffice will be written over when you update the packages.
So perhaps it is better to add the export to your bashrc or something.
Good luck and let us know if this works
John
PS In kde 4.7 there is a much improved kde4 compatibility mode for gtk apps under kde4.
This will give you visually better results than the native soffice QT4 integration anyhow.
PPS How is kde4.7 working anyway? I am hesitant to "upgrade" from a .5 point release to a .0 point release.
Is it stable?
Last edited by jwork123nl (2011-08-07 07:53:51)

Impdp triggers always give error ORA-04071:missing BEFORE, AFTER or INSTEAD

Hello,
I am using 11g impdp to create a test system.
I use this cmd to import
impdp 'SYS/xxxxx@PWRFUN AS SYSDBA' dumpfile=PWRPROD.DMP logfile=PWRFUNimportPROD.log SCHEMAS=pwrplant TABLE_EXISTS_ACTION=REPLACE
Then I get this error for all the triggers
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
Failing sql is:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;
As you can see, the trigger does contain the word "before".
When I remove " "PWRPLANT"."APPROVAL_STEPS_HISTORY" " and run the trigger below, it compiles correctly. Why is this, and how do I make my impdp to run correctly?
CREATE TRIGGER PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
FOR EACH ROW
BEGIN    :new.user_id := USER;    :new.time_stamp := SYSDATE; END;

same error, thanks for your attemp
Error starting at line 1 in command:
CREATE TRIGGER "PWRPLANT"."APPROVAL_STEPS_HISTORY" PS_HISTORY
BEFORE UPDATE OR INSERT ON PWRPLANT.APPROVAL_STEPS_HISTORY
REFERENCING new AS new
FOR EACH ROW
BEGIN :new.user_id := USER; :new.time_stamp := SYSDATE; END;
Error report:
ORA-04071: missing BEFORE, AFTER or INSTEAD OF keyword
04071. 00000 - "missing BEFORE, AFTER or INSTEAD OF keyword"
*Cause:    The trigger statement is missing the BEFORE/AFTER/INSTEAD OF clause.
*Action:   Specify either BEFORE, AFTER or INSTEAD OF.

MacBook Pro with Retina 13" Late 2013 thunderbolt port broken after 10.9.4 update

One of Thunderbolt Port (near USB port) was broken after 10.9.4 update.
I usually use mini Display Port to Display Port cable to connect my external screen, it works fine before 10.9.4 update. After 10.9.4 update, I tried to connect the external screen with the same cable, and the main screen of my MacBook Pro with Retina Display twinkling once so I'm sure the external screen was identified, but no video signal output.
I went to local Apple Premium Reseller (there is no Apple Store in Taiwan) and the they told me all of Thunderbolt Port was fine, they test with their own 10.9.2 copy and it seems ok. After that, I tried to re-install 10.9.4, downloading directly from Apple, the system re-install progress was complete but the Thunderbolt Port issue still there.
I connect to the broken Thunderbolt Port with Thunderbolt to Ethernet adapter, and it works fine, so I believe the only problem is that there is no video signal output from the Thunderbolt Port (near USB port one).
What should I do now?
Model: MacBook Pro with Retina 13" Late 2013

I can confirm that problem, too: Im' working with a Dell U2713HM display, connected via display port. Since 10.9.4 Update i'm experiencing random black screens and/or display going to energy saving mode. Today i've had this issue twice: Display going black and after disconnecting the macbook von all cables screen of the macbook remaining black. Holding Power Button for about 10 s restarts the macbook. After 5 minutes the same problem appeared again.

Missing indexes after system copy

Hi All
we have around 70,000 missing indexes after the system copy
offline export from
source with sun solaris oracle
To
Linux oracle
but these appeared after we Run SGEN , which took 60 hours for a 200 Gb database.
and target system response is also slow , how to go ahead with this issue
we have checked export and import logs , none of the packages were missed
1 Why these missing indexes after SGEN , and why SGEN for 60 hours
2 when we check the Tables which appeared in Missing indexes ,from SE14 it says In Consistency with Data dictionary
3 and the other error , is Index Missing in the database ,
4 but we cant create all these manually.
Regards

Hi Matt
Thanks for the response
After sap suggestion , we have done only import again, with 721 R3load same as export.
but still the R3load.exe.log of import shows as done with 720 kernel.
import R3load.exe log //bas/720_REL/src/R3ld/R3load/R3ldmain.c#
export R3load.exe log //bas/721_REL/src/R3ld/R3load/R3ldmain.c#10 $ SAP
But when we compare the sapinst_dev and AGR logs both from export and import
both are referring the same 721 R3load version ,
//bas/721_REL/src/R3ld/R3load/R3ldmain.c
still we have same missing indexes issue , after we did the import again.
Are we making any mistakes in export , Any suggestions are welcome
hi all , kindly respond with your inputs , on this
Regards

Why does Visual STudio 2012 References keep showing Exclamation mark (which means assembly is missing) even after I specify the exact path?

Our web application at work requires Visual Studio 2012
For one of the projects within the Visual Studio 2012 Web Application Solution, we need the System.Web.Mvc in the References.
I already have the following in the packages folder:
{blah...blah..Visual Studio Solution path..blah}\packages\Microsoft.AspNet.Mvc.5.1.1\lib\net45\System.Web.Mvc.dll
I keep adding it, but the References still shows the Exclamation mark ( which means missing) next to the System.Web.Mvc
Why does it keep showing the Exclamation mark ( which means missing) , even after I specify the exact path to the System.Web.Mvc.dll ?

Hi cslewis33,
Thank you for posting in MSDN forum.
Based on your issue, if you want to add the System.Web.Mvc reference for a web application in VS2012. As far as l know that the System.Web.Mvc dll is default be located like this path:" C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET MVC 4\Assemblies\System.Web.Mvc.dll.
So if you create the web app using c# language, I suggest you can right-click your Reference under the we application -> Add Reference->select the System.Web.Mvc in the Assemblies tab.
If the above suggestion still could not help you, I suggest you can consult this issue directly to the ASP.NET forum:http://forums.asp.net/ , maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Missing Apps after System restore

Yesterday I did a System Restore on my iPhone 3Gs and now all of my Apps are missing. After this I tried to do a Restore from backup again but I still have the same problem.
I don't have Sync Apps ticked in iTunes as if I do it will sync all apps and there is a mix of iPad and iPhone apps there. For some Apps there are separate iPad and iPhone versions and I'm not sure if this will cause any problems.
Is there a way to have the apps restored to the same folders they were in before? I know I can sync selected apps from iTunes but I spent a lot of time organising all of my apps into folders and I'm hoping to avoid having to do that again. When I tick "Sync Apps" but before actually going ahead iTunes shows 10 screens of Apps and none are in folders as they were before.
I thought that doing a restore from a backup that I did just before the restore would have restored the phone exactly as I had it before.
Thanks for any advice you can offer.

No iTunes content including 3rd party apps are included with your iPhone's backup. If you don't have Sync Apps selected under the Apps tab for your iPhone sync preferences with iTunes along with the apps selected below that you want available on your iPhone - which can be placed in folders with iTunes followed by a sync, iTunes does not know which apps you had installed on your iPhone. With Sync Apps selected along with the apps in your chosen folders, when restoring your iPhone with iTunes from your iPhone's backup, your iPhone will be restored in this regard. After restoring as a new iPhone or from the backup, this must be followed by a sync to re-transfer your selected iTunes content including 3rd party apps to your iPhone. What is selected under the Apps tab for your iPhone sync preferences will be pre-selected prior to the initial sync with iTunes after the restore, and the apps will be transferred back to the same folders as before. Your mistake in this process was not having Sync Apps selected under the Apps tab. With this selected, after downloading an app direct with your iPhone the app will be copied to your iTunes library automatically the first time you sync your iPhone with iTunes after doing so.
If there is an iPad only app that you select to be transferred to your iPhone, a warning message will be provided with the following sync indicating the app cannot be installed on your iPhone. You can create your app folders with iTunes followed by a sync.

[SOLVED] Oxygen widget style missing/broken after KDE 4.8.0 to 4.8.1

Similar Messages

Maybe you are looking for