[SOLVED] P67A-GD65 mainboard missing Intel RAID Rom after updating BIOS

I use 2 HDDs to build a RAID 0 array using Intel P67 RAID driver. I've just updated the BIOS to the 1.I version, and after that my computer can't boot up, showing the message "Missing Operating System". I booted into DOS and failed to read my hard disk, combining with that the Intel Matrix Storage Manager Option ROM didn't show up during the POST (which prompts me to press Ctrl-I to enter the RAID configuration before I updated the BIOS), I think it's the Intel RAID driver's problem. However, the Marvell RAID's prompt still shows, so the Marvell RAID should still work well. I encountered the same problem the last time I updated the BIOS, but I forgot how I got it well again... Please help. Thanks a lot!
I didn't noticed that my BIOS settings had been reset after I updated the BIOS, so I should manually changed the SATA mode to RAID. I was required to run a system recovery after I set the SATA mode back to RAID since the system failed to load, and Windows re-installed the USB3.0 driver after the first boot after the update (I don't know why this is). And the problem solved. Hope this is helpful to guys have similar problem as me.

Please post the full system specs.
>>Posting Guide<<

Similar Messages

P67A-GD65 mainboard incompatibility with Steel series XAI gaming mouse

Hallo,
As mentioned officially on SteelSeries web site http://faq.steelseries.com/questions/166/My+computer+gets+stuck+at+BIOS+stage+during+the+boot+for+a+few+minutes+when+the+Xai+is+connected. there's a problem with p67A-GD65 mainboard ( i don't know if other MSI P67A MB series have the same problem) and Steel-series XAI mouse about the pc gets stuck at BIOS stage during the boot for a few minutes when the Xai is connected. and personally i add that it's impossible in my p67a-gd65 (B3) to use this mouse for navigate in UEFI bios because it's moves only laterally.
I HOPE THAT MSI RELEASE VERY SOON A BIOS UPDATE ( lasted version 1.B have again this issue) FOR P67A-GD65 (B3) ( maybe other P67 models?) MAINBOARD THAT RESOLVE THIS VERY FASTIDIOUS PROBLEM.
Thanks.

Hello,
next time you start a topic, please skip the CAPS. CAPS are considered SCREAMING and that is rather impolite. In addition to that, this is a user-to-user forum and not MSI Technical Support. We do not make BIOS/UEFI Updates here and if you want to report anything that needs fixing, report it to Technical Support directly: http://support.msi.com/
That said, please note that the latest UEFI/BIOS release is not E7681IMS.1B0 [=v1.11] but actually E7681IMS.1C9 [=v1.12b9]. Various mouse related fixes have already been implemented. So, I suppose the best thing to do is probably to find out whether or not your problem has already been fixed:
E7681IMS.1B0 ---> E7681IMS.1C5
- Updating the latest USB module version 4.6.3_USB_08.10.10.
- Fix the Achiva 27'' LCD QH270-IPSBS compatibility issue.
- Fix AEXEA DDR3-1600MHz memory boot fail.
- Don't clear password when load defaults in BIOS Setup.
- Fix mouse click will hang 0Dh in some page when entering setup with user password.
- Fix the GT ratio show error issue when OC genie enable;
- Fix the Package C State limit item No Limit option value.
- When unplug any USB mouse and plug again then system will hang in UEFI bios
- When using the USB mouse and move and play around for 1 minute then the mouse cursor disappear.
- You will see 2 cursor under overclocking page using the below mouse:
---> Steelseries KINZU
---> Razer Copperhead RZ01-050100
---> Razer Copperhead RZ01-050200
---> RAZER DeathAdder RZ01-0015, Infrared Gaming Mouse
---> ROCCAT KONE ROC-11-200
- Fix USB Keyboard can't use under dos.
- Fine tune 2133Mhz memory stabilization.
- Fix the issue that using AEXEA DDR3-1600MHz 4GB 1.65V will have normal boot up but when running Memtest Deluxe 3.8, display hangs at "running fast write tests¡".
- Fix Post Screen show CPU speed 100x63=6300 MHz when "Adjust CPU Ratio in OS" is Enable.
If I was you, I would give E7681IMS.1C5 a try first and see what it does to your problem: https://forum-en.msi.com/index.php?topic=144655.msg1105581#msg1105581

Camera roll missing from iphone 4S after update to iOS 8

camera roll missing from iphone 4S after update to iOS 8

Hi,
It's normal, it's replaced with another folder.
and now you can recuperate your deleted pictures from a folder or after 30 days they will be deleted.

Possible to update Z77A GD65 bios with latest intel raid rom?

I was wondering how difficult it is to update the bios myself with the new intel beta rom?

Quote from: Daffy101 on 10-June-12, 00:29:04
I was wondering how difficult it is to update the bios myself with the new intel beta rom?
Try this one. It's based on the e7751ims.a43 with the following updated components:
1. intel me firmware 8.0.10.1464 (stock: 8.0.3.1427)
2. intel raid orom 11.1.0.1413 (stock: 11.0.0.1339)
3. sandy bridge microcode 0x28 (stock: 0x25)
4. ivy birdge microcode 0x12 (stock: 0x10)
I've NOT tested it because I don't have z77 motherboard but it should work fine. However I'll not be held responsible about any direct or indirect damages to (but not limited to) your board resulting from flashing and/or using this bios. USE IT AT YOUR OWN RISK!
The checksum of the modded file e7751ims-mod1.a43 is:
Code: [Select]
SHA-256: f420998b3dba8a3eb68afcafeeae8297ce279d3dbd95ae88296c35d1259d4fd8
hXXX://world-wide-web.sendspace.com/file/l539gt

P67A-GD65 (b2) stuck in boot loop after bad flash

Hello,
My mainboard is stuck, I can't open bios setup, (even tho it appears in f11 menu), and it won't boot on any device.
I removed every hard drive and DVD, and tried to boot on DOS with a usb, but it won't even boot DOS, and no usb device appears in f11 menu (I tried every usb ports)
And I can't enter bios setup (it just reboots)
Initially I was trying to update my bios because some features I wanted were not in my old version. But I think Avast blocked the update program (E7681v43.exe opened in an usb) and when I restarted the bios flash failed, and my PC entered a boot loop. When I press f11, it's a new interface so some things in the bios updated.
The only message I get when I put the E7681v43.exe and E7681IMS.430, or the files for v1j (oldest version before ivy bridge support) on a fat32 usb stick (tried formatted, and formated with Rufus), a red message appears saying "bios me updated ... file not found."
Same thing if I try the MSIHQ flash utility, it doesn't work as my PC won't boot on the usb.
I think my motherboard is bricked and the only solution is to send it to msi to get a working bios.
My motherboard p67a gd65 (b2) (the one with bad sata 2 ports) and it doesn't appear in the product name list anymore to register it on msi...
It was bought the on the 19th of January 2011, I hope I can still ask for msi for help!
I'm looking forward to your opinions on my issue, and sorry for the long text.

Quote from: Svet on 24-September-13, 17:50:38
older b2 cannot be updated to the .4xx
you have to send the mobo to be replaced with newer revision
Thanks! do you know where can I ask for a replacement?
I can't register it on msi, and when I ask a question and I give the serial number it just abords...
I already send an email to msi France (I live in Belgium). But email are too slow usually.
and what about the secondary bios, no way to repair primary bios with it?

MSVCP11O.dll missing from my computer after updates

Good Morning, I have recently been in touch with you in regards to a problem I am having with my computer after updating apps on the 19/03/2014. My computer keeps saying that launching 64 - Bit versions of some Adobe products such as photoshop, bridge shows an error message stating that msvcpllo.dll file is missing. This error appears after I updated the Creative Cloud desktop app to version 1.5 released 19/3/2014
The I get the message The probem was caused because the VC redistributable files are not installed properly. Then it goes on to saying how to do this but I am having trouble cause it makes no sense to me, could you please make this easy for me so I can install the necessary file so I can get back to my assignments which are due.
Please help Kaz
I have pressed the installation app and it only goes to 35% and stops

Hi Creative Designs,
Please refer the article: http://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html.
Regards,
Romit Sinha

[SOLVED]no sound in both headphone and speaker after update (alsa)

No sound after update. But, I can hear sound in headphone after install pulseaudio, while there is no sound in speaker (after plugging out headphone). I have tried some methods in related wiki articles, such as alsa and pulseaudio, but not works.
My enviroment is arch64, kde. I have installed lib32-alsa-plugins lib32-libpulse lib32-openal.
Anything others I can do? Thanks for advance.
Here is the output:
xym@Arch ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
xym@Arch ~ $ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 30162 1
snd_hda_codec_realtek 41295 1
snd_hda_intel 37000 3
snd_hda_codec 150305 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
xym@Arch ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Jan 15 11:09 by-path
crw-rw----+ 1 root audio 116, 7 Jan 15 11:09 controlC0
crw-rw----+ 1 root audio 116, 6 Jan 15 11:09 hwC0D0
crw-rw----+ 1 root audio 116, 5 Jan 15 11:09 hwC0D3
crw-rw----+ 1 root audio 116, 4 Jan 15 12:17 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Jan 15 12:17 pcmC0D0p
crw-rw----+ 1 root audio 116, 2 Jan 15 12:17 pcmC0D3p
crw-rw---- 1 root audio 116, 1 Jan 15 11:09 seq
crw-rw----+ 1 root audio 116, 33 Jan 15 11:09 timer
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitchs
Playback channels: Front Left - Front Rightss
Limits: Playback 0 - 64s
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 31 [100%] [33.00dB] [on]
Front Right: Capture 31 [100%] [33.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [off]
Front Right: Playback 31 [100%] [12.00dB] [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
xym@Arch ~ $ speaker-test -c 2
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
1 - Front Right
Time per period = 5.651882
0 - Front Left
1 - Front Right
Time per period = 5.973485
0 - Front Left
I can't hear any sound during this test.
/etc/modprobe.d/modprobe.conf
blacklist snd_intel8x0m
Last edited by XuYimin (2014-01-16 12:18:02)

straykat wrote:
XuYimin, can you please give more info on what you mean by "update (alsa)"? There is no "alsa" package in Arch as alsa & it's modules are part of the (linux) kernel.
As you have already gone into alsamixer to ensure the appropriate channels are unmuted & set at the desired level, have you also gone into your KDE systems settings -> Multimedia -> Audio and Video Settings & rechecked your settings?
sorry，it's really misleading in my words.what i want to say is 'no sound after update, and the sound system is alsa.'
i'm sure the approiate channels are unmuted. in the Video Setting, I tested all sound cards in the list, But i can't hear sound.

[SOLVED] Missing libao.so.2 after update on 04/12/2010

I use pianobar frequently, and I discovered yesterday after running pacman -Syu that pianobar was no longer working:
$ pianobar
pianobar: error while loading shared libraries: libao.so.2: cannot open shared object file: No such file or directory
$ ldd /usr/bin/pianobar
linux-gate.so.1 => (0xb7855000)
libfaad.so.2 => /usr/lib/libfaad.so.2 (0xb77f5000)
libao.so.2 => not found
libpthread.so.0 => /lib/libpthread.so.0 (0xb77dc000)
libmad.so.0 => /usr/lib/libmad.so.0 (0xb77c5000)
libm.so.6 => /lib/libm.so.6 (0xb779e000)
libc.so.6 => /lib/libc.so.6 (0xb7657000)
/lib/ld-linux.so.2 (0xb7856000)
$ ls /usr/lib/ | grep libao
libao.so
libao.so.4
libao.so.4.0.0
libaoss.a
libaoss.so
libaoss.so.0
libaoss.so.0.0.0
I'm assuming that libao has been upgraded from libao.so.2 to libao.so.4, which is what's causing pianobar to fail to start up. I came across a this website while looking for help, and I tried running ldconfig with the following result:
# ldconfig -v | grep libao
libaoss.so.0 -> libaoss.so.0.0.0
libao.so.4 -> libao.so.4.0.0
Why is libao.so.2 missing all of a sudden? How can I get it back? I appreciate any help. Thanks.
Last edited by Altay_H (2010-04-14 01:37:20)

I just rebuilt pianobar using yaourt and it fixed the problem:
$ yaourt pianobar
$ ldd /usr/bin/pianobar
linux-gate.so.1 => (0xb776c000)
libfaad.so.2 => /usr/lib/libfaad.so.2 (0xb770c000)
libao.so.4 => /usr/lib/libao.so.4 (0xb7704000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb76eb000)
libmad.so.0 => /usr/lib/libmad.so.0 (0xb76d4000)
libm.so.6 => /lib/libm.so.6 (0xb76ad000)
libc.so.6 => /lib/libc.so.6 (0xb7566000)
libdl.so.2 => /lib/libdl.so.2 (0xb7562000)
/lib/ld-linux.so.2 (0xb776d000)
$ pianobar
Welcome to pianobar!
(i) Login... Ok.
(i) Get stations... Ok.
(i) Receiving new playlist... Ok.
|> "Everything Falls" by "Fee" on "Hope Rising"
# -03:43/03:43
Sorry I posted. I hope I didn't bother anyone.
EDIT: Thanks for the help, skottish.
Last edited by Altay_H (2010-04-14 01:36:11)

[SOLVED] Cannot connect to wireless networks any more after update

Hello,
I updated my system some days ago and, after that, I can't connect to wireless networks any more.
My network card is ath9k and I'm currently using wicd.
When I try to connect to my wireless network, I get "Veryfing AP association" message, then it fails to connect.
Here's the dmesg output :
[ 6369.650201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6369.824358] r8169 0000:05:00.0 eth0: link down
[ 6369.824375] r8169 0000:05:00.0 eth0: link down
[ 6369.824398] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6369.936721] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6371.462702] r8169 0000:05:00.0 eth0: link up
[ 6371.462718] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6373.214209] wlan0: authenticate with 00:1c:10:57:47:17
[ 6373.236813] wlan0: send auth to 00:1c:10:57:47:17 (try 1/3)
[ 6373.248706] wlan0: authenticated
[ 6373.248735] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6373.248737] ath9k 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 6373.248739] ath9k 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 6373.250756] wlan0: associate with 00:1c:10:57:47:17 (try 1/3)
[ 6373.253150] wlan0: RX AssocResp from 00:1c:10:57:47:17 (capab=0x411 status=0 aid=3)
[ 6373.253379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6373.253418] wlan0: associated
[ 6373.253431] ath9k 0000:09:00.0 wlan0: failed to set key 0
[ 6405.384916] wlan0: deauthenticating from 00:1c:10:57:47:17 by local choice (reason=3)
[ 6405.387398] cfg80211: Calling CRDA to update world regulatory domain
[ 6409.789779] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6409.890892] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6410.069734] r8169 0000:05:00.0 eth0: link down
[ 6410.069750] r8169 0000:05:00.0 eth0: link down
[ 6410.069778] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6410.263183] r8169 0000:05:00.0 eth0: link down
[ 6410.263212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6411.717705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6411.898268] r8169 0000:05:00.0 eth0: link down
[ 6411.898297] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6413.630832] r8169 0000:05:00.0 eth0: link up
[ 6413.630848] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6415.903790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6416.089275] r8169 0000:05:00.0 eth0: link down
[ 6416.089302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6416.089327] r8169 0000:05:00.0 eth0: link down
[ 6416.386308] r8169 0000:05:00.0 eth0: link down
[ 6416.386338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6418.067675] r8169 0000:05:00.0 eth0: link up
[ 6418.067691] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
This particular line caught my attention: " wlan0: de-authenticating from 00:1c:10:57:47:17 by local choice (reason=3)". So I searched for it (without the MAC address) on the internet and found several solutions for it, involving wpa_supplicant, dhcpcd, IPv6 (disable it on /etc/sysctl.d/40-ipv6.conf) and card power management (operation not supported, don't have option on BIOS), but none of them worked for me.
Here's an excerpt from /var/log/wicd/wicd.log:
2014/03/01 11:48:15 :: Connecting to wireless network Curiosity
2014/03/01 11:48:15 :: Putting interface down
2014/03/01 11:48:15 :: Releasing DHCP leases...
2014/03/01 11:48:15 :: Setting false IP...
2014/03/01 11:48:15 :: Stopping wpa_supplicant
2014/03/01 11:48:15 :: Flushing the routing table...
2014/03/01 11:48:15 :: Putting interface up...
2014/03/01 11:48:17 :: Attempting to authenticate...
2014/03/01 11:48:19 :: Setting static IP : 192.168.2.188
2014/03/01 11:48:19 :: Setting default gateway : 192.168.2.1
2014/03/01 11:48:19 :: Verifying AP association...
2014/03/01 11:48:19 :: Attempt 1 of 10...
2014/03/01 11:48:24 :: Attempt 2 of 10...
2014/03/01 11:48:27 :: Attempt 3 of 10...
2014/03/01 11:48:30 :: Attempt 4 of 10...
2014/03/01 11:48:33 :: Attempt 5 of 10...
2014/03/01 11:48:36 :: Attempt 6 of 10...
2014/03/01 11:48:39 :: Attempt 7 of 10...
2014/03/01 11:48:42 :: Attempt 8 of 10...
2014/03/01 11:48:45 :: Attempt 9 of 10...
2014/03/01 11:48:48 :: Attempt 10 of 10...
2014/03/01 11:48:51 :: Connection Failed: Failed to ping the access point!
2014/03/01 11:48:51 :: exiting connection thread
2014/03/01 11:48:55 :: Sending connection attempt result association_failed
2014/03/01 11:48:55 :: Autoconnecting...
2014/03/01 11:48:55 :: Attempting to autoconnect with wired interface...
2014/03/01 11:48:55 :: Putting interface down
2014/03/01 11:48:55 :: Releasing DHCP leases...
2014/03/01 11:48:55 :: Setting false IP...
2014/03/01 11:48:55 :: Stopping wpa_supplicant
2014/03/01 11:48:55 :: Flushing the routing table...
2014/03/01 11:48:55 :: Putting interface up...
2014/03/01 11:48:58 :: Setting static IP : 192.168.2.188
2014/03/01 11:48:58 :: Setting default gateway : 192.168.2.1
2014/03/01 11:48:58 :: Connecting thread exiting.
2014/03/01 11:49:01 :: Putting interface down
2014/03/01 11:49:01 :: Releasing DHCP leases...
2014/03/01 11:49:01 :: Setting false IP...
2014/03/01 11:49:02 :: Stopping wpa_supplicant
2014/03/01 11:49:02 :: Flushing the routing table...
2014/03/01 11:49:02 :: Putting interface up...
2014/03/01 11:49:04 :: Setting static IP : 192.168.2.188
2014/03/01 11:49:04 :: Setting default gateway : 192.168.2.1
2014/03/01 11:49:04 :: Connecting thread exiting.
2014/03/01 11:49:07 :: Sending connection attempt result success
I've been connecting through wire since then and it's extremely uncomfortable being planted in one place.
Thanks.
Last edited by joaowojwicz (2014-04-03 12:17:53)

ewaller wrote:Well, let's start with a couple sanity checks. Look at the output of uname -a and of pacman -Qi linux and ensure that the running kernel (uname) is the same version that is installed.
Then. please post the output of lspci -nn and of ip link
Then, take a look at the output of sudo iw wlan0 scan
and see if you can see your AP. Also, verify that your wireless is called wlan0 by checking the ouput of ip link
Okay
>>log: uname -a
Linux Canopus 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:10:07 CET 2014 i686 GNU/Linux
>>log: pacman -Qi linux
Name : linux
Version : 3.13.5-1
Description : The Linux kernel and modules
Architecture : i686
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.13.5
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 61687.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 22 Feb 2014 20:11:46 BRT
Install Date : Mon 24 Feb 2014 02:50:00 BRT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : SHA256 Sum
>>log: lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
09:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
Yes, my wireless is called wlan0. I linked something to /dev/null to get the predictable names
>>log: ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 94:39:e5:f2:17:3f brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 18:03:73:93:4d:1b brd ff:ff:ff:ff:ff:ff
I'll just paste my wireless connection here.
>>log: sudo iw wlan0 scan
BSS 00:1c:10:57:47:17(on wlan0)
TSF: 59645240249 usec (0d, 16:34:05)
freq: 2462
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime (0x0411)
signal: -31.00 dBm
last seen: 260 ms ago
Information elements from Probe Response frame:
SSID: Curiosity
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 11
ERP: Barker_Preamble_Mode
ERP D4.0: Barker_Preamble_Mode
Extended supported rates: 6.0 9.0 12.0 48.0
karol wrote:
Post the list of packages that were updated.
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
Okay, put code tag now. Here's the whole log since Feb, 24th. This was the day I started having problems.
[2014-02-24 02:32] [PACMAN] Running 'pacman -Suy'
[2014-02-24 02:32] [PACMAN] synchronizing package lists
[2014-02-24 02:32] [PACMAN] starting full system upgrade
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 6 trust: 0-, 0q, 0n, 0m, 0f, 1u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 6 signed: 60 trust: 1-, 0q, 0n, 5m, 0f, 0u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 60 signed: 4 trust: 60-, 0q, 0n, 0m, 0f, 0u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Updating trust database...
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
[2014-02-24 02:49] [PACMAN] upgraded archlinux-keyring (20140124-1 -> 20140220-1)
[2014-02-24 02:49] [PACMAN] upgraded hicolor-icon-theme (0.12-2 -> 0.13-1)
[2014-02-24 02:49] [PACMAN] upgraded banshee (2.6.1-2 -> 2.6.2-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-cups (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-hid2hci (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-libs (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-plugins (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-utils (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded cairo-perl (1.103-2 -> 1.104-1)
[2014-02-24 02:49] [PACMAN] upgraded cups-filters (1.0.45-1 -> 1.0.46-1)
[2014-02-24 02:49] [PACMAN] upgraded dbus-glib (0.100.2-1 -> 0.102-1)
[2014-02-24 02:49] [PACMAN] upgraded dialog (1:1.2_20140112-1 -> 1:1.2_20140219-1)
[2014-02-24 02:49] [PACMAN] upgraded easytag (2.1.9-1 -> 2.1.10-1)
[2014-02-24 02:49] [PACMAN] upgraded ethtool (1:3.11-1 -> 1:3.13-1)
[2014-02-24 02:49] [PACMAN] upgraded flashplugin (11.2.202.336-1 -> 11.2.202.341-1)
[2014-02-24 02:49] [PACMAN] upgraded libpng (1.6.8-1 -> 1.6.9-1)
[2014-02-24 02:49] [PACMAN] upgraded gdk-pixbuf2 (2.30.4-1 -> 2.30.5-1)
[2014-02-24 02:49] [PACMAN] upgraded glib-perl (1.301-1 -> 1.304-1)
[2014-02-24 02:49] [PACMAN] upgraded gparted (0.17.0-2 -> 0.18.0-1)
[2014-02-24 02:49] [PACMAN] upgraded pango-perl (1.224-2 -> 1.225-1)
[2014-02-24 02:49] [PACMAN] upgraded gtk2-perl (1.247-2 -> 1.249-1)
[2014-02-24 02:49] [PACMAN] upgraded imagemagick (6.8.8.6-1 -> 6.8.8.7-1)
[2014-02-24 02:49] [PACMAN] upgraded kdesdk-poxml (4.12.2-1 -> 4.12.2-2)
[2014-02-24 02:49] [PACMAN] upgraded libass (0.10.2-2 -> 0.11.1-1)
[2014-02-24 02:49] [PACMAN] upgraded libfm (1.1.2.2-2 -> 1.2.0-3)
[2014-02-24 02:49] [PACMAN] upgraded libftdi (1.1-2 -> 1.1-3)
[2014-02-24 02:49] [PACMAN] upgraded libindi (0.9.6-7 -> 0.9.7-1)
[2014-02-24 02:49] [PACMAN] upgraded linux-firmware (20140123.418320b-1 -> 20140217.343e460-1)
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-02-24 02:50] [ALPM-SCRIPTLET] depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> WARNING: AT keyboard support is no longer built into the kernel.
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> In order to use your keyboard during early init, you MUST
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> include the 'keyboard' hook in your mkinitcpio.conf.
[2014-02-24 02:50] [PACMAN] upgraded linux (3.12.9-1 -> 3.13.5-1)
[2014-02-24 02:50] [PACMAN] upgraded linux-headers (3.12.9-1 -> 3.13.5-1)
[2014-02-24 02:50] [PACMAN] upgraded lirc-utils (1:0.9.0-69 -> 1:0.9.0-70)
[2014-02-24 02:50] [PACMAN] upgraded lynx (2.8.7-7 -> 2.8.8-1)
[2014-02-24 02:50] [PACMAN] upgraded man-pages (3.58-1 -> 3.60-1)
[2014-02-24 02:50] [PACMAN] upgraded mercurial (2.9-1 -> 2.9-2)
[2014-02-24 02:50] [PACMAN] upgraded mutter (3.10.3-1 -> 3.10.4-1)
[2014-02-24 02:50] [PACMAN] upgraded networkmanager (0.9.8.8-1 -> 0.9.8.8-3)
[2014-02-24 02:50] [PACMAN] upgraded networkmanager-pptp (0.9.8.4-1 -> 0.9.8.4-2)
[2014-02-24 02:50] [PACMAN] upgraded pcmanfm (1.1.2-2 -> 1.2.0-1)
[2014-02-24 02:50] [PACMAN] upgraded postgresql-libs (9.3.2-4 -> 9.3.3-1)
[2014-02-24 02:50] [PACMAN] upgraded ppp (2.4.5-8 -> 2.4.6-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-configobj (4.7.2-6 -> 5.0.1-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-urwid (1.1.1-1 -> 1.2.0-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-zope-interface (4.0.5-2 -> 4.1.0-1)
[2014-02-24 02:50] [PACMAN] upgraded sbc (1.1-1 -> 1.2-1)
[2014-02-24 02:50] [PACMAN] upgraded t1lib (5.1.2-4 -> 5.1.2-5)
[2014-02-24 02:50] [PACMAN] upgraded totem-plparser (3.10.0-4 -> 3.10.1-1)
[2014-02-24 02:50] [PACMAN] upgraded vimpager (1.8.5-1 -> 1.8.6-1)
[2014-02-24 02:50] [PACMAN] upgraded vlc (2.1.3-1 -> 2.1.4-1)
[2014-02-24 02:50] [PACMAN] upgraded webkitgtk (2.2.4-2 -> 2.2.5-1)
[2014-02-24 02:50] [PACMAN] upgraded wine (1.7.12-2 -> 1.7.13-1)
[2014-02-24 02:50] [PACMAN] upgraded xarchiver (0.5.2-6 -> 0.5.3-1)
[2014-02-24 02:50] [PACMAN] upgraded xcb-util-wm (0.4.0-1 -> 0.4.1-1)
[2014-02-24 02:50] [PACMAN] upgraded xmlto (0.0.25-3 -> 0.0.25-5)
[2014-02-24 02:50] [PACMAN] upgraded youtube-dl (2014.02.13-1 -> 2014.02.22.1-1)
[2014-02-24 12:51] [PACMAN] Running 'pacman -Suy'
[2014-02-24 12:51] [PACMAN] synchronizing package lists
[2014-02-24 12:51] [PACMAN] starting full system upgrade
[2014-02-24 12:57] [PACMAN] upgraded ffmpeg (1:2.1.3-1 -> 1:2.1.4-1)
[2014-02-24 12:57] [PACMAN] upgraded libwbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded python2-configobj (5.0.1-1 -> 5.0.1-2)
[2014-02-24 12:57] [PACMAN] upgraded s-nail (14.5.2-4 -> 14.6-1)
[2014-02-24 12:57] [PACMAN] upgraded smbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded samba (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded xbmc (12.3-8 -> 12.3-9)
[2014-02-24 13:19] [PACMAN] Running 'pacman -Syy'
[2014-02-24 13:19] [PACMAN] synchronizing package lists
[2014-02-24 13:20] [PACMAN] Running 'pacman -Suu dhcpcd'
[2014-02-24 13:20] [PACMAN] starting full system upgrade
[2014-02-24 13:24] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/downgrade/downgrade-3.3-1-any.pkg.tar.xz'
[2014-02-24 13:24] [PACMAN] installed downgrade (3.3-1)
[2014-02-24 16:04] [PACMAN] Running 'pacman -Suy'
[2014-02-24 16:04] [PACMAN] synchronizing package lists
[2014-02-24 16:04] [PACMAN] starting full system upgrade
[2014-02-24 16:04] [PACMAN] upgraded vim-spell-br (20120506-1 -> 20120802-1)
[2014-02-24 16:04] [PACMAN] upgraded vim-spell-en (20120506-1 -> 20120802-1)
[2014-02-24 18:30] [PACMAN] Running 'pacman -Suy'
[2014-02-24 18:30] [PACMAN] synchronizing package lists
[2014-02-24 18:30] [PACMAN] starting full system upgrade
[2014-02-24 20:13] [PACMAN] Running 'pacman -Suy'
[2014-02-24 20:13] [PACMAN] synchronizing package lists
[2014-02-24 20:13] [PACMAN] starting full system upgrade
[2014-02-24 21:31] [PACMAN] Running 'pacman -Suy'
[2014-02-24 21:31] [PACMAN] synchronizing package lists
[2014-02-24 21:31] [PACMAN] starting full system upgrade
[2014-02-24 21:53] [PACMAN] Running 'pacman -Suy'
[2014-02-24 21:53] [PACMAN] synchronizing package lists
[2014-02-24 21:53] [PACMAN] starting full system upgrade
[2014-02-24 22:38] [PACMAN] Running 'pacman -R networkmanager'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals'
[2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module'
[2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module telepathy-kde-send-file telepathy-kde-text-ui'
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-text-ui (0.7.1-2)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-send-file (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-integration-module (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-filetransfer-handler (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-desktop-applets (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-runner (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-auth-handler (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-approver (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-accounts-kcm (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-list (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed skype4empathy (20110407-4)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-common-internals (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed empathy (3.10.3-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-mission-control (5.16.0-1)
[2014-02-24 22:41] [PACMAN] removed kdeplasma-applets-networkmanagement (1:0.9.0.9-1)
[2014-02-24 22:41] [PACMAN] removed network-manager-applet (0.9.8.8-1)
[2014-02-24 22:41] [PACMAN] removed networkmanager-pptp (0.9.8.4-2)
[2014-02-24 22:41] [PACMAN] removed networkmanager-openvpn (0.9.8.4-1)
[2014-02-24 22:41] [ALPM] warning: /etc/NetworkManager/NetworkManager.conf saved as /etc/NetworkManager/NetworkManager.conf.pacsave
[2014-02-24 22:41] [PACMAN] removed networkmanager (0.9.8.8-3)
[2014-02-25 03:40] [PACMAN] Running 'pacman -Suy'
[2014-02-25 03:40] [PACMAN] synchronizing package lists
[2014-02-25 03:40] [PACMAN] starting full system upgrade
[2014-02-25 03:44] [PACMAN] upgraded youtube-dl (2014.02.22.1-1 -> 2014.02.24-1)
[2014-02-25 12:23] [PACMAN] Running 'pacman -Suy'
[2014-02-25 12:23] [PACMAN] synchronizing package lists
[2014-02-25 12:24] [PACMAN] starting full system upgrade
[2014-02-25 12:24] [PACMAN] upgraded dmenu (4.5-3 -> 4.5.13.5ed5e90-1)
[2014-02-25 12:24] [PACMAN] upgraded telepathy-glib (0.22.0-1 -> 0.22.1-1)
[2014-02-25 12:24] [PACMAN] upgraded tumbler (0.1.29-1 -> 0.1.30-1)
[2014-02-25 12:25] [PACMAN] upgraded youtube-dl (2014.02.24-1 -> 2014.02.25-1)
[2014-02-25 14:55] [PACMAN] Running 'pacman -Suy'
[2014-02-25 14:55] [PACMAN] synchronizing package lists
[2014-02-25 14:55] [PACMAN] starting full system upgrade
[2014-02-25 15:19] [PACMAN] upgraded ipython2 (1.1.0-1 -> 1.2.1-1)
[2014-02-25 15:19] [PACMAN] upgraded python2-pip (1.5.2-1 -> 1.5.4-1)
[2014-02-25 17:13] [PACMAN] Running 'pacman -Suy'
[2014-02-25 17:13] [PACMAN] synchronizing package lists
[2014-02-25 17:13] [PACMAN] starting full system upgrade
[2014-02-25 18:10] [PACMAN] Running 'pacman -Suy'
[2014-02-25 18:10] [PACMAN] synchronizing package lists
[2014-02-25 18:10] [PACMAN] starting full system upgrade
[2014-02-25 18:41] [PACMAN] Running 'pacman -S fbgrab'
[2014-02-25 18:41] [PACMAN] installed fbgrab (1.0-7)
[2014-02-26 13:19] [PACMAN] Running 'pacman -Suy'
[2014-02-26 13:19] [PACMAN] synchronizing package lists
[2014-02-26 13:19] [PACMAN] starting full system upgrade
[2014-02-26 13:25] [PACMAN] upgraded libmariadbclient (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded mariadb-clients (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded mariadb (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded python2 (2.7.6-2 -> 2.7.6-3)
[2014-02-26 13:25] [PACMAN] upgraded s-nail (14.6-1 -> 14.6.1-1)
[2014-02-26 13:26] [PACMAN] upgraded xbmc (12.3-9 -> 12.3-10)
[2014-02-26 16:00] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
[2014-02-26 16:02] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
[2014-02-26 16:42] [PACMAN] Running 'pacman -Suy'
[2014-02-26 16:42] [PACMAN] synchronizing package lists
[2014-02-26 16:42] [PACMAN] starting full system upgrade
[2014-02-26 17:25] [PACMAN] Running 'pacman -Suy'
[2014-02-26 17:25] [PACMAN] synchronizing package lists
[2014-02-26 17:25] [PACMAN] starting full system upgrade
[2014-02-26 17:25] [PACMAN] upgraded libaccounts-glib (1.15-1 -> 1.16-1)
[2014-02-26 17:25] [PACMAN] upgraded libaccounts-qt (1.10-1 -> 1.11-1)
[2014-02-26 17:52] [PACMAN] Running 'pacman -Suy'
[2014-02-26 17:52] [PACMAN] synchronizing package lists
[2014-02-26 17:52] [PACMAN] starting full system upgrade
[2014-02-26 17:53] [PACMAN] upgraded signon (8.55-1 -> 8.56-1)
[2014-02-26 18:08] [PACMAN] Running 'pacman -Suy'
[2014-02-26 18:08] [PACMAN] synchronizing package lists
[2014-02-26 18:08] [PACMAN] starting full system upgrade
[2014-02-26 21:52] [PACMAN] Running 'pacman -Suy'
[2014-02-26 21:52] [PACMAN] synchronizing package lists
[2014-02-26 21:52] [PACMAN] starting full system upgrade
[2014-02-26 22:08] [PACMAN] upgraded grep (2.16-1 -> 2.18-1)
[2014-02-26 22:41] [PACMAN] Running 'pacman -S xchat'
[2014-02-26 22:41] [PACMAN] installed xchat (2.8.8-13)
[2014-02-27 00:02] [PACMAN] Running 'pacman -Suy'
[2014-02-27 00:02] [PACMAN] synchronizing package lists
[2014-02-27 00:02] [PACMAN] starting full system upgrade
[2014-02-27 01:41] [PACMAN] Running 'pacman -Suy'
[2014-02-27 01:41] [PACMAN] synchronizing package lists
[2014-02-27 01:41] [PACMAN] starting full system upgrade
[2014-02-27 12:20] [PACMAN] Running 'pacman -Suy'
[2014-02-27 12:20] [PACMAN] synchronizing package lists
[2014-02-27 12:20] [PACMAN] starting full system upgrade
[2014-02-27 12:26] [PACMAN] upgraded net-snmp (5.7.2-8 -> 5.7.2.1-1)
[2014-02-27 12:26] [PACMAN] upgraded youtube-dl (2014.02.25-1 -> 2014.02.26-1)
[2014-02-27 16:01] [PACMAN] Running 'pacman -Suy'
[2014-02-27 16:01] [PACMAN] synchronizing package lists
[2014-02-27 16:01] [PACMAN] starting full system upgrade
[2014-02-27 16:05] [PACMAN] upgraded wpa_supplicant (2.0-4 -> 2.1-3)
[2014-02-27 19:58] [PACMAN] Running 'pacman -Suy'
[2014-02-27 19:58] [PACMAN] synchronizing package lists
[2014-02-27 19:58] [PACMAN] starting full system upgrade
[2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus'
[2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus-font'
[2014-02-27 20:01] [PACMAN] installed terminus-font (4.38-4)
[2014-02-27 21:04] [PACMAN] Running 'pacman -Suy'
[2014-02-27 21:04] [PACMAN] synchronizing package lists
[2014-02-27 21:04] [PACMAN] starting full system upgrade
[2014-02-27 22:51] [PACMAN] Running 'pacman -Suy'
[2014-02-27 22:51] [PACMAN] synchronizing package lists
[2014-02-27 22:51] [PACMAN] starting full system upgrade
[2014-02-28 12:09] [PACMAN] Running 'pacman -Suy'
[2014-02-28 12:09] [PACMAN] synchronizing package lists
[2014-02-28 12:09] [PACMAN] starting full system upgrade
[2014-02-28 16:51] [PACMAN] Running 'pacman -Suy'
[2014-02-28 16:51] [PACMAN] synchronizing package lists
[2014-02-28 16:52] [PACMAN] starting full system upgrade
[2014-03-01 12:10] [PACMAN] Running 'pacman -S bluez'
[2014-03-01 12:19] [PACMAN] Running 'pacman -S xf86-input-joystick linuxconsole'
[2014-03-01 12:20] [PACMAN] installed xf86-input-joystick (1.6.2-3)
[2014-03-01 12:20] [PACMAN] installed linuxconsole (1.4.6-1)
[2014-03-01 12:21] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/rejoystick/rejoystick-0.8.1-3-i686.pkg.tar.xz'
[2014-03-01 12:21] [PACMAN] installed rejoystick (0.8.1-3)
[2014-03-01 12:22] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/joystick/joystick-20051019-12-i686.pkg.tar.xz'
[2014-03-01 12:48] [PACMAN] Running 'pacman -Suy'
[2014-03-01 12:48] [PACMAN] synchronizing package lists
[2014-03-01 12:48] [PACMAN] starting full system upgrade
[2014-03-01 12:49] [PACMAN] upgraded glibc (2.19-2 -> 2.19-3)
[2014-03-01 12:49] [PACMAN] upgraded device-mapper (2.02.105-1 -> 2.02.105-2)
[2014-03-01 12:49] [PACMAN] upgraded cryptsetup (1.6.3-2 -> 1.6.4-1)
[2014-03-01 12:49] [PACMAN] upgraded feh (2.9.3-1 -> 2.10-1)
[2014-03-01 12:49] [PACMAN] upgraded libtirpc (0.2.3-2 -> 0.2.4-1)
[2014-03-01 12:49] [PACMAN] upgraded readline (6.2.004-2 -> 6.3-1)
[2014-03-01 12:49] [PACMAN] upgraded lvm2 (2.02.105-1 -> 2.02.105-2)
[2014-03-01 12:49] [PACMAN] upgraded ppp (2.4.6-1 -> 2.4.6-2

Recovery Partition Missing and Bluetooth Issues After Update

After upgrading to 10.9.3 my recovery partition is gone and my bluetooth will pair with a new device, connect, and then disconnect. After that I am not able to reconnect the new bluetooth device. I can see it, but can't connect to it. I have tried multiple bluetooth devices, and they all do the same thing. I am really baffled about the missing recovery partition. Any ideas?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

Can Firefox 5 set to stop a connection and/or show a a progress bar rather than only ' loading'? I miss my version 3 after updating.

Can Firefox 5 set to stop a connection and/or show a a progress bar rather than only ' loading'? I miss my version 3

You can use this extension.
*Status-4-Evar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

How do I fix missing and corrupted images after update to Mountain Lion 10.8.2 and Aperture 3.4?

Last night I tried to update to Aperture 3.4 on my MacBook Pro (late 2007 / 3,1 model) and received a message that I needed to install Mountain Lion 10.8.2 first. However, there was no update in my App Store account for 10.8.2. The update for 10.8.2 appeared above the Aperture 3.4 update after I restarted the laptop and rechecked for updates. I proceeded to update Mountain Lion and then Aperture. Everything seemed to be working fine so I opened Aperture 3.4 and watched it update the database without any issues...
Upon examining the small library (of approximately 1200 images totaling about 8 GB) that I leave on this MacBook Pro specifically for testing Aperture updates, I observed the following:
I know anything can happen with stored images, so I try to create redundancy by duplicating important photos on import to an external device, running Time Machine backups and keeping memory cards stored away until I am comfortable with the integrity of the first 2 methods. I am not really worried about this specific Aperture Library on this laptop because it has become my "laboratory" for testing new updates before we apply them to our other computers.
In general, I try not to be too early of an adopter when it comes to software and updates--even though I have had remarkably few problems with Apple updates in the past. However, my success rate with Apple's products and "feature curiosity" occasionally leads me to update early! It is my curiosity that, again, has me wondering: What went wrong and how can I fix this in case it happens to something important in the future?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

[Solved] Alt-Tab window switching no longer working after update (JWM)

The next issue I am trying to straighten out after a recent, long-overdue pacman -Syu, is the loss of window-switching functionality using the alt-tab key combination. This is under the JWM window manager, by the way. The alt key seems to work as expected when, for example, firefox has focus: if I hit alt left arrow, the browser goes back to the preceding page. But if I hit alt and tab together, say, in the browser or when a terminal has focus, it seems to be read as though I were pressing only the tab key. So, with two windows maximized on the desktop, the alt-tab combination does not toggle between them. If the terminal has focus I can see the cursor jumping over a tab space each time I press the key combination.
Can anyone offers pointers on how I might resolve or begin diagnosing this issue? I should mention that another change I did in the wake of the update was to make the system log me in and start the GUI each time I boot the machine (as discussed at https://wiki.archlinux.org/index.php/St … h_profile). I'm not sure why that would have any effect but I thought I should mention it. I think this is just a pretty standard pc105 keyboard by the way.
Input will be appreciated.
Thanks,
James
Last edited by jamtat (2013-02-01 17:07:32)

Thank you for your input, anonymous_user. I decided, on reading it, to compare my .jwmrc with the /etc/system.jwmrc file. I noted that, in my .jwmrc, the keybindings section was empty, while that section in the /etc/system.jwmrc had several entries--and even one that seemed to refer to the alt-tab key combination. So I copied that section into my .jwmrc, restarted JWM, and the key combination now seems to be working as it should. Granted, it's a bit strange in that it doesn't open some kind of dialog box with the names of open windows, showing you in list form the windows you're scrolling through. But it does take you to other open windows when, after you've hit the tab key one or more times, you release the alt key. So the issue is resolved and was pretty simple.
James

Always use the default account when composing new messages box missing in Outlook 2010 after updating the product key.

I have 2 accounts in outlook 2010. 1 is for me and the other I have delegate access to. When I am in the delegates email and want to reply it automatically uses the account the email is in. So if I am in my email, the from is me but if I am in the delegates
email and hit reply the from is them. Now this is not working and I can't figure out how to get it to work. The only thing that changes is that office asked me to activate recently, which is weird since I have had this same computer with the same version of
office for almost a year now. I did a ton of searching and came across an option on the internet: "Always use the deafult account when composing new messages" but this option is not there on my computer. I checked another computer I have with Office
2010 also and the option is available so it must be something to do with the office activation because I haven't done it on this computer yet. PLEASE HELP!!!

Seems this is a hot issue recently, I've post a reply to another thread with the similar topic, please reference that:
http://social.technet.microsoft.com/Forums/en-US/57289ddd-0dd5-4938-92f7-ee420d8b0d7c/outlook-2010-does-not-reply-to-emails-using-the-same-address-that-received-it?forum=officeitproprevious
Thanks for your updating.
Tony Chen
TechNet Community Support

[SOLVED] Arch will not boot all the way after update

Hey all,
I feel really stupid about this one, but I really need some help.
Today I updated my system and eventually during that session I decided to turn off the computer using "shutdown -h 0". This resulted in an error. I tried simply "reboot", but got the same message. I stupidly did not write down the message and then even more stupidly just held down the power button to turn the computer off thinking that I could boot back in later, get the same message, and deal with it then.
However, when I booted up, I was confronted with a screen telling me that "/dev/sda3" was recovering, the orphaned sectors, and the fact that sda3 is clean. All of it seemed to be expected after an improper shutdown, but it won't boot any further. I tried turning it off and on again a couple times, but it is still stuck on that screen. It doesn't describe the orphans anymore, but it still says it is recovering the journal.
I'm not sure what to do. Any help would be appreciated. I did look for posts concerning the recent update and found this: https://bbs.archlinux.org/viewtopic.php?pid=1370237, but I don't know if I have the same problem.
Last edited by MongooseOfPower (2014-01-14 01:23:43)

Thank you for the reply.
After waiting on that screen for at least 20 minutes, It started displaying systemd[1] errors. If it would be helpful I could type them all out, but they are all just Dependency or Time out fails.
After a while it displayed a welcome to emergency mode greeting and after a couple minutes finally let me give the root password. I straight out tried "journalctl -xb" which responded with:
journalctl: error while loading shared libraries: libcrypt.so.20: cannot open shared object file: No such file of directory
Periodically I am now getting this error:
systemd[1]: Failed to start Trigger Flushing of Journal to Persistent Storage.

[SOLVED] P67A-GD65 mainboard missing Intel RAID Rom after updating BIOS

Similar Messages

Maybe you are looking for