[Solved] pacman 3.5.0, --nodeps option did not work anymore

I just updated to pacman 3.5.0, and i cannot install packages without dependency check.
I mean command line like pacman -Sd or pacman -Rd did not work again.
Last edited by jarryson (2011-03-17 08:57:26)

Have a look at the news file and man page:
-d, --nodeps
           Skips dependency version checks. Package names are still checked. Normally, pacman will always check a package’s dependency fields to ensure that all dependencies are installed and there are
           no package conflicts in the system. Specify this option twice to skip all dependency checks.

Similar Messages

  • Shared iMovie 9.0 Project using iDVD option did not work

    I created an iMovie project and want to create a DVD. I shared the iMovie project using the Share>iDVD option. The file took about 1-1/2 hours to create. Once it was completed iDVD opened but no movie appeared. I only saw the standard 4 option splash plate you get when iDVD opens. The created file exists, I found it. I tried opening the file using "Open Existing Project" but the file won't open. I thought the file was too big, but reading other posts that is not the problem.
    Why won't the shared file appear in iDVD??

    wb8976 wrote:
    …  Does this mean that Apple may have prevented iMovie from using the Divx QuickTime components?…
    ask the makers of this 3rd party plugin.
    try the free perian.org plugin.
    … why that historic format anyhow …?
    keep in mind: iMovie is meant for Camcorders.

  • TS3276 These options did not work.

    I have a MacBook Pro, Lion, version 10.7.4.
    I use Mac Mail version 5.2.
    I used Mail Doctor, and all lights are green.
    I can't rebuild my mailbox as that function is dimmed. 
    Other users have said that deleting the envelope didn't work either. 
    I receive mail just fine on my iPad.  Why has it suddently stopped on my Macbook?
    I've followed all advice so far on the web - cannot understand the problem. If it was a corrupted file or e-mail, how come I can still receive mail on my iPad?  Why can't I rebuild my mailbox - why is this function dimmed?
    What's up, Mac??  Help??
    xx
    Brent

    Do they appear in the iTunes Store > Purchased section? (Use the search tool.) If so delete from iTunes, close iTunes and restart, then download from iTunes Store > Purchased > Not on this computer.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    tt2

  • Have just reinstalled Acrobat Pro XI and the Fit and shrink to page size options are not working - Any ideas?

    When printing to a laser device my Acrobat Pro XI all of a sudden was not shrinking oversized pages to fit on paper. The Fit and Shrink to page options did not work. Could still output file reduced by using the percentage box but wondered if anyone else has encountered this problem before? Reinstalled Acrobat but problem still there.

    I suddenly have started having this same problem. Anyone have an answer?

  • Fail Migration: Refresh options did not Migrate

    Finishing Migration from 3.1 to 4.1 Sp 2, I am facing this issues in my environment. Fail refresh options did not migrate. See screen shot below. I need some imputes on how to go about making this work. 
    2. Also default passwords did not migrate for some reports. I will appreciate any suggestion, Notes, Documentation or links on how I can go about this.
    Thanks

    Hi,
    To resolve this behavior, the report must be saved for all users in version
    3.x and exported again. This allows a user in BI 4.x to edit and refresh the report.
    Regards,
    Asma

  • When i did my last update of Firefox from 3.6 to the version before 5.0 Frame 2.0 did not work. Have you solved this problem in the new version?

    When i upgraded Firefox from version 3.6 to the next version I got a message about Frames that did not work. I work as a warehouse manager and we use an application called LogTrade when we ship goods. LogTrade was not working with the version after 3.6, I think it was 4.0? I had to reinstall 3.6 to get it working. Since LogTrade is essential for my work I don't know if I dare to upgrade to version 5.0.

    You can try this extension to override compatibility issues,
    * https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

  • I recently tried to burn some photos to a disc.  It did not work, but then I ended up with a .fpbf folder on my desktop.  Can't trash it, and when trying to burn again, I get this "... can't be burned because the original items can't be found". Help???

    I recently tried to burn some photos on a CD. For some reason, It did not work.  Now I have a .fpbf folder on my desktop. I can't seem to get rid of it.  I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes.  Doing so, does nothing at all.  And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?".   When I skip and continue burning, nothing shows up on the CD.  In the meantime, the .fpbf folder is still in my desktop.  I tried changing the aliases on each pic, but it still doesn't work.  Any ideas of how I can remove this folder from my desktop?
    Thank you.

    Beavis2084,
    Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
    Here's what I did:
    1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
    2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
    Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
    I don't know what to do anymore...

  • I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

    I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
    I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us  reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

    You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • RDP Error: Your credentials did not work. SAP AS ABAP 7.4 SP5 incl. BW on SAP HANA 1.0 SP7

    Hi Experts,
    I have created instances from the SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition] free trial solution, as it is described in documentation. But I cannot connect to the Frontend Server instance (Windows 2008) via Remote Desktop Connection, I got a message: Your credentials did not work. User: Administrator, with the master password (pwd not mistyped, while it works on PUTTY, via Saplogon, etc.). I have a 64-bit Windows 7.
    I have done the following so far:
    First I have created an instance with the Public option, but the same RDP error. Then I have created a new instance as a Corporate Network. The result is: I can connect to VPN service, I can ping the Windows server, but I cannot log on to it with RDC. On AWS I have opened all ports for this instance. Then I updated my RDP, JAVA, enabled RDP on Firewall. Just for a test, I have also switched off Firewall and the AntiVirus program, still nothing. I have tried a Remote Desktop Connection to my Windows Instance from another laptop with Windows 32 bit system (from home and work too), and still facing the same problem: Your credentials did not work. Then I have also tried a tip from windows site (enablecredsspsupport:i:0 into .rdp). When I start the RDC, I get a certification error: The server name on the certificate is incorrect, but I can proceed.  Now the windows logon screen on the remote system appears, but still the same result: The user name or password is incorrect.
    I would really appreciate some help.
    Thanks,
    Andrea

    Hi Yogesh,
    Unfortunately this problem is not solved, I still cannot use the Frontend Instance. I use another solution:  I manage to access the SAP Backend instance ( SAP HANA and AS ABAP ) from my local client (laptop). The disadvantage of this solution is that I had to install myself the client part ,but at least  it works.
    Regards,
    Andrea

  • I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI sign

    I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
    Sincerely,
    Catlos

    This does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes.  I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever.  My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems.  I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions.  So here I am debating on whether to spend all this $ on an airport extreme?  I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did.  Just wondering if you have ATV as well and if the AE solved its problems?  I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
    **Glad they didn't "moderate into extinction" your post yet, lol, Thank

  • Recovery did not work with new hard drive

    The original Toshiba HD(250G, sata1) of my laptop( ) crashed.
    I bought new one (320G, sata 2, Western digit )
    The problem is that, when I tried to use the recovery CD that I used to use it with old HD before, it did not work with this new HD well!?
    After cd1 and cd2 finish installing it ask to take it out then restart, I do so, but when it comes to setup setting of windows.
    An error message come out says " Windows Setup could not configure Windows on this computer’s hardware”
    It restart and says again " Windows could not complete the installation. To install Windows on theis compuiter, restart the installation."
    I have been trying to solve this a lot, but no way
    I tried what in this link, but it drive me with another problem http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-could-not-complet...
    I hope that I get the right thing to do, from ur forum by this post.
    Thanks a lot

    Did you folks search here for "advanced format drive"?    People have had numerous weird problems with the new advanced format hard drives in older Toshibas.    I can't look up all the threads for you.    But here is one:
    http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Recovery-won-t-work-on-new-upgraded-hardri...

  • My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal  simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphon

    My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal  simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
    Thanks

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • Webi report part(include Opendoc Link) ondesktop did not work in BI Widgets

    My customer followed <BI Widgets User Guide>(XI3.1) to create a webi report part(include Opendoc Link) onto desktop.
    Page 26:
    To convert Report Part into a Widget ,drag and drop the Report Part from the Web Intelligence Viewer onto the desktop.
    As a widget, the Report Part will include the following BI Widgets features:
    - Automatic refresh
    - User controlled size and positioning
    - Saved display and data context state
    - Optional setting as the top application window
    - Full XI R3 security
    - Web Intelligence opendoc links to detailed reports.
    But it can not be clicked(hyperlink did not work).
    My customer follow the SAP Note 1244968 to create again, it still can not be clicked.
    For I can't reproduce this issue, could you tell me what's it probably related to?
    SAP Note 1244968:
    Symptom
    Trying to use Hyperlinks in a BI Widget created from a WebIntelligence
    report
    Environment
    XIR3
    Workflow
    1. Login in Webintelligence
    2. Create on efashion a Webintelligence report with the
    objects:Year,Sales Revenue
    3. In the Edit panel add a column to the table and insert the
    variable :=If([State]="DC"; HTMLEncode("http://uk.yahoo.com"); "")
    4. In the Properties Display/Display/Read cell content as Hyperlink
    5. Run the report and save it
    6. Open the Webintelligence report with HTML view and click on the
    hyperlink you are redirected to the Yahoo website
    7. Log in BI Widget
    8. Right click on the right inside icon of BI Widget and click on
    Document List Explorer
    9. Find the Webintelligence report and double click on it
    10. Click on the table and drag and drop it to your desktop
    11. The BI Widget gets created
    12. Click on the column containing the Hyperlink:nothing happens.
    Cause
    There is no functionality of using Hyperlinks in a BI Widget created
    from a Webintelligence report
    Resolution
    Enhancement Request ADAPT01119581 has been created
    Environment details:
    Srerver Environment: OS Version: RedHatEnterpriseLinuxES4.0 update5
    Client Environment: OS Version: WindowsXP
    Browser: IE6
    JRE Version: 1.6.003_
    Web & Application Server: Tomcat 5.5.20
    Database character: AL32UTF8, JA16SJIS
    Connection: native, ODBC, OLEDB
    NLS LANG: Japanese Japan.JA16SJIS

    Hi Soniya,
    These are the steps:
    1. Log in into infoview
    2. Change the preferences (Click in the Preference button in the main tool bar), in the WebIntelligence section change the Select a default view format: to Interactive.
    3. Click OK
    4. Open the report where you want to add the hyperlink
    5. Right click in the column or cell to add the hyperlink
    6. Click Hypelink > New
    7. You will see the Create Hypelink window, click Browse the select which report do you want to link
    8. Fill in the parameter, prompts, etc.
    and that's it, hope it's clear now. If you have any question let me know.

  • Just tried to install FireFox and it did not work as my OS(mac) is compatible. now i dont have firefox. can you point me to a link for version 3.6.24 please

    my work computer has an old OS and does not support newer version of Firefox. Unaware of this i tried ti install the latest version only to find it did not work and i have lost use of firefox.
    I would really like a link to version 3.6.24

    '''3.6.24 is supported'''
    http://www.mozilla.org/en-US/firefox/all-older.html
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Problem in SQL with CURSOR( ) ,Why the CURSOR did not work?

    hi All:
    I have a problem in SQL with CURSOR.
    The data is as the attachments.
    Here is the SQL statement as follow:
    SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
    FROM F3102 X
    WHERE X.IGDOCO=A.WADOCO
    AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
    FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
    WHERE A.WADOCO='10004'
    The statement above returns records as follow:
    WADC WADOCO IGCOST DETAIL
    WO 10004 A1 CURSOR STATEMENT : 4
    CURSOR STATEMENT : 4
    IGLITM
    1KV90CPG2
    1KV90CPG2
    1KV90CPG2
    But, after I add one statement in the subquery, there is no record returned from CURSOR.
    Here is the SQL statement:
    SELECT A.WADCTO,A.WADOCO,B.IGCOST,CURSOR (SELECT X.IGLITM
    FROM F3102 X
    WHERE X.IGDOCO=A.WADOCO
    AND X.IGCOST=B.IGCOST
    AND X.IGCOST IN ('B1','D1','C3')) AS DETAIL
    FROM F4801 A INNER JOIN F3102 B ON A.WADOCO=B.IGDOCO AND A.WADCTO=B.IGDCTO AND B.IGCOST>' '
    WHERE A.WADOCO='10004'
    The statement above returns records as follow:
    WADC WADOCO IGCOST DETAIL
    WO 10004 A1 CURSOR STATEMENT : 4
    CURSOR STATEMENT : 4
    no rows selected
    Why the CURSOR did not work?
    The database version is Oracle Database 10g Release 10.2.0.4.0 - 64bit Production.
    F3102 DATA:
    IGDOCO     IGDCTO     IGLITM     IGCOST
    10004     WO     1KV90CPG2      A1
    10004     WO     1KV90CPG2      B1
    10004     WO     1KV90CPG2      C3
    10004     WO     1KV90CPG2      D1
    F4801 DATA:
    WADCTO     WADOCO
    WO     10004
    Edited by: user2319139 on 2010/3/2 上午 1:17
    Edited by: user2319139 on 2010/3/2 上午 1:20

    Why this structure and not a join?
    The cursor() function returns a cursor handle that needs to be processed - in other words, the client needs to fetch data from it. The Oracle® Database SQL Reference+ (http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/expressions005.htm#i1035107) describes it as being equivalent to a ref cursor handle.
    Thus why are you creating ref cursor handles as a column in a SQL projection - where each row will have a "+nested+" ref cursor handle to process. What problem are you attempting to hack solve this way?

Maybe you are looking for