[SOLVED]pacman fails to install mtpaint

[me@mypc ~]$ sudo pacman -S mtpaint
resolving dependencies...
looking for inter-conflicts...
Targets (3): giflib-4.1.6-4 openjpeg-1.3-3 mtpaint-3.31-4
Total Download Size: 0.86 MB
Total Installed Size: 2.61 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
giflib-4.1.6-4-x86_64 85.0K 533.6K/s 00:00:00 [###################################################################################################################################################################] 100%
error: failed retrieving file 'openjpeg-1.3-3-x86_64.pkg.tar.gz' from mirror.lividpenguin.com : File unavailable (e.g., file not found, no access)
warning: failed to retrieve some files from extra
error: failed to commit transaction (File unavailable (e.g., file not found, no access))
Errors occurred, no packages were upgraded.
[me@mypc ~]$
I have tried changing mirrors but it doesn't help
Last edited by dameunmate (2011-09-25 21:56:23)

You must use pacman -Syy when changing mirrors. openjpeg is at version 1.4-1. You should not expect to find openjpeg 1.3-3 anywhere.

Similar Messages

[SOLVED] Pacman trying to install 64-bit packages on 32-bit system

I was upgrading my Arch Linux i686 install, and I got the following error:
error: The mirror 'http://mirror.rit.edu/archlinux/$repo/os/$arch' contains the $arch variable, but no Architecture is defined.
I added Architecture = i686 to /etc/pacman.conf under [options], and when I run pacman -Syu, I get these errors:
error: failed to prepare transaction (package architecture is not valid)
:: package clucene-2.3.3.4-2-x86_64 does not have a valid architecture
:: package filezilla-3.5.3-1-x86_64 does not have a valid architecture
:: package lshw-B.02.16-1-x86_64 does not have a valid architecture
:: package yajl-2.0.4-1-x86_64 does not have a valid architecture
Why is pacman trying to install x86_64 packages on my i686 system?
Last edited by nticompass (2012-01-13 03:24:43)

Got errors
:: Retrieving packages from community...
error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from mirrors.kernel.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from archlinux.supsec.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from cake.lib.fit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from mirrors.cat.pdx.edu : Not Found
error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from mirror.ece.vt.edu : Not Found
error: failed retrieving file 'virtualbox-modules-4.1.8-1-x86_64.pkg.tar.xz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
warning: failed to retrieve some files from community
error: failed to commit transaction (File unavailable (e.g., file not found, no access))
Seems to be looking for 64 bit packages still. Had a similar issue when installing another prog as well

[SOLVED]Pacman try to install old version packages which not exists

When I tried to install django, pacman reported 404 error.
And I found that pacman tried to install django-1.4.3-1 while the resposity I used only has django-1.4.4-1
I've deleted all resposities except
Server = http://mirrors.163.com/archlinux/$repo/os/$arch
And then I tried
pacman -Syy
but it seems useless.
Last edited by sandnon (2013-02-20 17:12:55)

Snowman wrote:
sandnon wrote:
I found the reason now...
Because the 163.com's repository does not have django..
I add
Server = ftp://ftp.archlinux.org/$repo/os/$arch
to the first and then
pacman -Syy
At last, I can install django now..
I think this topic can be marked as SOLVED. Should I mark it or the administrator will do this?(In fact I do not know how to mark it.:))
You shouldn't use ftp.archlinux.org, it's throttled. Use another mirror instead.
I just use ftp.archlinux.org occacionally to fix the problem.
Sometimes I don't want to wait the mirror updating itself.

[SOLVED]pacman fails to upgrade... /usr/bin/vercmp: cannot execute bin

Proceed with installation? [Y/n] y
:: Retrieving packages from core...
pacman-3.2.1-1-x86_64 491.3K 1850.7K/s 00:00:00 [########################################################################################################] 100%
checking package integrity...
(1/1) checking for file conflicts [########################################################################################################] 100%
(1/1) upgrading pacman [########################################################################################################] 100%
warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
/tmp/alpm_eT02H1/.INSTALL: line 5: /usr/bin/vercmp: cannot execute binary file
/tmp/alpm_eT02H1/.INSTALL: line 5: [: : integer expression expected
Here is more info on my system and the file vermcp is installed and permissions seem correct.
http://rafb.net/p/MYk3pO21.html
HELP?
Last edited by rooloo (2008-09-09 00:07:09)

Ok, this was my dumb mistake again. I was testing out powerpill on my server which is a 32 bit machine. I tried copying my 64 bit mirrorlist to my 32 bit server because I have it ranked and slimmed down to only the essential servers.

[Solved] Pacman fails to get packages http 403 or 404 error

Hi,
I'm not sure if I should raise this as a bug or not, or indeed if I am doing something fundamentally wrong...
Pacman tells me there are updates to do, but:
Using the mirror "mirrors.manchester.m247.com" I get a 404 error
Using the mirror "http://mirror.bytemark.co.uk/archlinux/$repo/os/$arch" I get a 403 error
example:
# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date 0.0 B 0.00B/s 00:00 [-----------------------------------------------------------------------] 0%
community is up to date 0.0 B 0.00B/s 00:00 [-----------------------------------------------------------------------] 0%
multilib is up to date 0.0 B 0.00B/s 00:00 [-----------------------------------------------------------------------] 0%
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Packages (9) ca-certificates-mozilla-3.18-3 dhcpcd-6.8.1-1 gnupg-2.1.2-3 iptables-1.4.21-3 p11-kit-0.23.1-2 procps-ng-3.3.10-2 sudo-1.8.13-1 which-2.21-1 whois-5.2.7-1
Total Download Size: 0.03 MiB
Total Installed Size: 21.35 MiB
Net Upgrade Size: 4.34 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages ...
error: failed retrieving file 'whois-5.2.7-1-x86_64.pkg.tar.xz' from mirrors.manchester.m247.com : The requested URL returned error: 404
warning: failed to retrieve some files
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.
any ideas?
[edited to add solved tag to title]
Last edited by flangemonkey (2015-04-01 15:29:18)

Hi flangemonkey,
that mirror was not synced yet when you did the upgrade (the last sync ended today at 10:54 UTC, about 17 mitues after you posted on this borad). It should be ok now, just try to redo the update. Next time, you may want to check first the status of the mirrors https://www.archlinux.org/mirrors/status
edit: typo
Last edited by mauritiusdadd (2015-04-01 11:06:10)

[Solved] Pacman fails to satisfied java-runtime dependency on upgrade

Hi. So I haven't been able to upgrade yesterday or today because of this bug. I couldn't figure out how to solve it on my own.
This is what happens when I try to upgrade:
jake@levi> sudo pacman -Syyu ~
:: Synchronizing package databases...
core 104.8 KiB 76.7K/s 00:01 [##################################################################################################] 100%
extra 1389.5 KiB 187K/s 00:07 [##################################################################################################] 100%
community 1549.8 KiB 191K/s 00:08 [##################################################################################################] 100%
multilib 89.7 KiB 145K/s 00:01 [##################################################################################################] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: languagetool: requires java-runtime>=6
:: rhino: requires java-runtime
I have jre7-openjdk-headless already installed, which provides java-runtime 7, so I don't see why I could be running into any problems.
[1] jake@levi> pacman -Qi jre7-openjdk-headless ~
Name : jre7-openjdk-headless
Version : 7.b147_2.1-1
URL : http://icedtea.classpath.org
Licenses : custom
Groups : None
Provides : java-runtime=7
Depends On : libjpeg-turbo lcms2 nss ca-certificates-java rhino
Optional Deps : libcups: needed for Java Mauve support - libmawt.so
fontconfig: needed for Java Mauve support - libmawt.so
Required By : languagetool rhino
Conflicts With : java-runtime openjdk6
Replaces : None
Installed Size : 107421.00 KiB
Packager : Andreas Radke <[email protected]>
Architecture : x86_64
Build Date : Wed Feb 15 06:36:20 2012
Install Date : Thu Mar 1 14:06:19 2012
Install Reason : Installed as a dependency for another package
Install Script : Yes
Description : Free Java environment based on OpenJDK 7.0 with IcedTea7 replacing binary plugs - Minimal Java runtime - needed for executing non GUI Java programs
There could be something I don't understand though. Any help is appreciated.
Last edited by Coward (2012-03-08 00:30:57)

mira wrote:
Karol's advice did not worked for me, so I did this:
pacman -Rdd jre7-openjdk-headless
and after that this:
pacman -S jre7-openjdk
and then the update worked as it should. Hope that helps somebody.
Not sure what was the issue in your case, but I did say "Try to ignore the conflicts and see if it works out." and by that I meant the '-dd' switch.
Now I see I should have been explicit about it as my comment doesn't make it clear at all.

[Solved]Pacman fails to connect to server in Arch Virtual Machine

Hi
I've just installed arch 2008.06 in VMWare Workstation 6.04 on Vista Business x64. The setup all went fine and i am now logged into my system, but Pacman refuses to connect to anything. i have tried Bridged networking and NAT to no avail. whenever i run 'pacman -Syy' i get the message
"error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g.,file not found, no access)"
followed by the same message for each mirror in my mirrorlist, and then again for 'extra.db.tar.gz' and 'community.db.tar.gz', and then 'failed to synchronise any databases' at the end.
I have tried pinging google, as well as several of the arch mirrors and they all work fine. wget also seems to work fine, it's just pacman that's not working.
Anyone have any suggestions?
Last edited by henrypootel (2008-09-12 01:53:56)

That's what i thought too so i switched off the Vista firewall and still no luck. I am behind a hardware firewall here at work, but it shouldn't be blocking FTP traffic. i use FTP in windows all the time.
Just tried downloading a file using wget and it worked fine.
Last edited by henrypootel (2008-09-11 03:45:29)

[SOLVED]Pacman fails to update

Hi,
It's been a while, so I hope this issue can be resolved here, and I'll be on my best behaviour. I tried an update (system-wide) with
pacman -Syu
it came back with :
error: failed to commit transaction (conflicting files)
initscripts: /etc/profile.d/locale.sh exists in filesystem
Errors occurred, no packages were upgraded.
What do I do next?
Thanks for helping out
Thor
Last edited by Thor@Flanders (2011-10-26 09:38:53)

Will do, tnx.
New-year resolution: read the news on-site more often.
Marking this as solved
Last edited by Thor@Flanders (2011-10-26 09:38:33)

[SOLVED] pacman fails on a package that should've been ignored anyway

Hi all,
I don't understand why the below upgrade isn't working. I exclude the kernel from my normal upgrade command as it prevents me from loading any modules until I reboot, so I typically only upgrade the kernel when I'm about to reboot.
In this case failure to upgrade the kernel is preventing the nVidia driver from being updated also, which is fine, but I don't understand why it then says it can't install 'nvidia' because 'nvidia-utils' is the wrong version - I thought 'nvidia' was going to be skipped? Why is it trying to install it anyway?
Is there a way to get around this without having to manually exclude all these packages?
$ pacman -Su
:: Starting full system upgrade...
:: Replace dbus-python with extra/python2-dbus? [Y/n]
warning: linux: ignoring package upgrade (3.3.8-1 => 3.4.2-2)
warning: linux-headers: ignoring package upgrade (3.3.8-1 => 3.4.2-2)
resolving dependencies...
warning: ignoring package linux-3.4.2-2
warning: cannot resolve "linux>=3.4", a dependency of "nvidia"
warning: ignoring package linux-3.4.2-2
warning: cannot resolve "linux>=3.4", a dependency of "virtualbox-modules"
:: The following packages cannot be upgraded due to unresolvable dependencies:
nvidia virtualbox-modules
Do you want to skip the above packages for this upgrade? [y/N] y
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: nvidia: requires nvidia-utils=295.53
Last edited by Malvineous (2012-06-17 05:23:21)

Ohhh, so you're saying it ignored nvidia, but tried to upgrade nvidia-utils. nvidia-utils requires nvidia, but nvidia needs a specific version of nvidia-utils which would be broken by upgrading nvidia-utils, so it refuses to upgrade nvidia-utils because of the existing dependency. Right.
So then the second part of my question - how can I get around this without adding nvidia-utils as an IgnorePkg? Can I tell pacman to just ignore it if the deps couldn't be satisfied and keep going with whatever's left?

[SOLVED] Pacman failed retrieving file 'core.db' after removing KDE

Hey, I had to remove KDE and foolishly used the -Rsc flag. Now, trying to update yields:
[root@Gal-PC2 gal]# pacman -Sy
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.isoc.org.il : Resolving timed out after 10524 milliseconds
error: failed retrieving file 'core.db' from mirror.us.leaseweb.net : Resolving timed out after 10523 milliseconds
I tryed using the -Sy and -Syy flags to update the database, and made sure I am not using ipv6. I think the -Rsc flag might deleted an importent package. I can connect to the net, and I can acess mirrors using http and I can ping the mirrors. The error persists on a large number of mirrors. Any help will be appriciated.
Last edited by Greenstuff (2015-02-08 20:49:24)

Sorry, will do!
The debug printed a lot of the first errors, so I cut them. This is what pacman --Syu --debug show:
debug: adding new server URL to database 'multilib': [url]http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.ds.hj.se/pub/os/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.uni-kl.de/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.tu-chemnitz.de/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirror.lnx.sk/pub/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirrors.st.uz/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://mirrors.mithril.org.ua/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.uni-bayreuth.de/linux/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://artfiles.org/archlinux.org/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://repo.ukdw.ac.id/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://linux.cs.nctu.edu.tw/archlinux/multilib/os/x86_64[/url]
debug: adding new server URL to database 'multilib': [url]http://ftp.kaist.ac.kr/ArchLinux/multilib/os/x86_64[/url]
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
:: Synchronizing package databases...
debug: url: [url]http://mirror.isoc.org.il/pub/archlinux/core/os/x86_64/core.db[/url]
debug: maxsize: 26214400
debug: using time condition: 1422991262
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
debug: curl returned error 28 from transfer
error: failed retrieving file 'core.db' from mirror.isoc.org.il : Resolving timed out after 10523 milliseconds
debug: url: [url]http://mirror.us.leaseweb.net/archlinux/core/os/x86_64/core.db[/url]
debug: maxsize: 26214400
debug: using time condition: 1422991262
debug: opened tempfile for download: /var/lib/pacman/sync/core.db.part (wb)
EDIT: SOLVED!
Ok, so I did indeed disable ipv6 as I promised, but turns out I put in the GRUB kernel line "ipv6.disable_ipv6=1". Upon re-reading the wiki, turns out this means ipv6 is disabled but tunnels with ipv6 may be opened by programs. I changed to "ipv6.disable=1" and pacman updates away! I hope others will find this usefull. Be careful!
Last edited by Greenstuff (2015-02-08 20:52:45)

[SOLVED] Pacman unable to install packages due to invalid or corrup...

Hullo,
I know this is a common error judging by the results google lists for that subject. But all sollutions I found don't work for my specific case.
My battery died on my laptop and when I rebooted and tried to install a package pacman complained the database was locked (can't remember if I was installing something or else while my battery died, happend while I was away).
So since I've just rebooted I deleted the lock-file by hand. Now when ever I tried to install something it would complain:
error: xyz: signature from "xyz @ zyx" is unknown trust
:: File /var/cache/pacman/pkg/packagexyz.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package (PGP signature))
So I removed /etc/pacman.d/gnupg, cleared the package-cache and ran pacman-key --init:
gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
gpg: no ultimately trusted keys found
gpg: Generating pacman keyring master key...
gpg: key B99666F8 marked as ultimately trusted
gpg: Done
==> Updating trust database...
gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
followed by pacman-key --populate archlinux:
==> Appending keys from archlinux.gpg...
gpg: no valid OpenPGP data found.
==> Updating trust database...
gpg: no need for a trustdb check
and pacman-key --refresh-keys:
gpg: refreshing 1 key from hkp://pool.sks-keyservers.net
gpg: requesting key B99666F8 from hkp server pool.sks-keyservers.net
gpgkeys: key AA3E1E751B31AB9C2E6CDA64F2A911E7B99666F8 can't be retrieved
gpg: no valid OpenPGP data found.
gpg: Total number processed: 0
==> ERROR: A specified local key could not be updated from a keyserver.
It looks like it's not doing much. Anyway, trying to install packages or upgrading the system results in me having to import a bunch of keys and then failing with the before mentioned error.
Anything I can do?
Thanks
Last edited by hachel (2014-02-24 11:50:56)

Rexilion wrote:Reinstall archlinux-keyring maybe? And then perform the commands you listed earlier.
Worked, thank you!

[solved]pacman doesn't install anything

hi
my pacman not work! then i say install any package it will download first and after says that the package is corrupt!!! (note that i can extract them by "tar -xvf")
pacman output:
pacman -S xorg
resolving dependencies...
looking for inter-conflicts...
Targets (41): xf86-video-vesa-2.3.0-3 xorg-docs-1.6-1
xorg-fonts-alias-1.0.2-1 xorg-fonts-100dpi-1.0.1-3
xorg-fonts-75dpi-1.0.1-3 xorg-res-utils-1.0.3-3
libpciaccess-0.12.1-1 xorg-fonts-misc-1.0.1-1
xorg-server-common-1.9.4-1 xf86-input-evdev-2.6.0-1
xorg-server-1.9.4-1 xorg-iceauth-1.0.4-1 xorg-sessreg-1.0.6-1
xorg-xcmsdb-1.0.3-1 xorg-xbacklight-1.1.2-1 xorg-xgamma-1.0.4-1
xorg-xhost-1.0.4-1 xorg-xinput-1.5.3-1 xorg-xmodmap-1.0.5-1
xorg-xrandr-1.3.4-1 mcpp-2.7.2-2 xorg-xrdb-1.0.8-1
xorg-xrefresh-1.0.4-1 xorg-xset-1.2.1-1 xorg-xsetroot-1.1.0-1
xorg-server-utils-7.6-1 xorg-twm-1.0.6-1 dmxproto-2.3.1-1
libdmx-1.1.1-1 xorg-xdpyinfo-1.2.0-1 xorg-xdriinfo-1.0.4-1
xorg-xev-1.1.0-1 xorg-xlsatoms-1.1.0-1 xorg-xlsclients-1.1.1-1
xorg-xvinfo-1.1.1-1 xorg-xwininfo-1.1.1-1 xorg-utils-7.6-6
xorg-xinit-1.3.0-2 xorg-luit-1.1.0-1 xbitmaps-1.1.1-1
xterm-267-1
Total Download Size: 0.00 MB
Total Installed Size: 48.76 MB
Proceed with installation? [Y/n] y
checking package integrity...
error: failed to commit transaction (invalid or corrupted package)
xf86-video-vesa-2.3.0-3-i686.pkg.tar.xz is invalid or corrupted
xorg-docs-1.6-1-any.pkg.tar.xz is invalid or corrupted
xorg-fonts-100dpi-1.0.1-3-any.pkg.tar.xz is invalid or corrupted
xorg-fonts-75dpi-1.0.1-3-any.pkg.tar.xz is invalid or corrupted
libpciaccess-0.12.1-1-i686.pkg.tar.xz is invalid or corrupted
xorg-fonts-misc-1.0.1-1-any.pkg.tar.xz is invalid or corrupted
xorg-server-common-1.9.4-1-i686.pkg.tar.xz is invalid or corrupted
xf86-input-evdev-2.6.0-1-i686.pkg.tar.xz is invalid or corrupted
xorg-server-1.9.4-1-i686.pkg.tar.xz is invalid or corrupted
xorg-iceauth-1.0.4-1-i686.pkg.tar.xz is invalid or corrupted
xorg-sessreg-1.0.6-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xcmsdb-1.0.3-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xbacklight-1.1.2-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xgamma-1.0.4-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xhost-1.0.4-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xinput-1.5.3-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xmodmap-1.0.5-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xrandr-1.3.4-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xrdb-1.0.8-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xrefresh-1.0.4-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xset-1.2.1-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xsetroot-1.1.0-1-i686.pkg.tar.xz is invalid or corrupted
xorg-server-utils-7.6-1-any.pkg.tar.xz is invalid or corrupted
xorg-twm-1.0.6-1-i686.pkg.tar.xz is invalid or corrupted
dmxproto-2.3.1-1-any.pkg.tar.xz is invalid or corrupted
libdmx-1.1.1-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xdpyinfo-1.2.0-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xdriinfo-1.0.4-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xev-1.1.0-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xlsatoms-1.1.0-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xlsclients-1.1.1-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xvinfo-1.1.1-1-i686.pkg.tar.xz is invalid or corrupted
xorg-xwininfo-1.1.1-1-i686.pkg.tar.xz is invalid or corrupted
xorg-utils-7.6-6-any.pkg.tar.xz is invalid or corrupted
xorg-xinit-1.3.0-2-i686.pkg.tar.xz is invalid or corrupted
xorg-luit-1.1.0-1-i686.pkg.tar.xz is invalid or corrupted
xbitmaps-1.1.1-1-any.pkg.tar.xz is invalid or corrupted
xterm-267-1-i686.pkg.tar.xz is invalid or corrupted
Errors occurred, no packages were upgraded.
how can i fix it? plz help
Last edited by sinoohe (2011-02-10 20:25:51)

wonder wrote:ok, let me guess. you made a symlink to liblzma.so.something because pacman was broken? if yes, pacman -S libarchive && pacman -Syu and remove the symlink that you made
ooh thanx!! the answer is yes
Last edited by sinoohe (2011-02-10 19:28:37)

Pacman fails to install git ?[FIXED]

I'm trying to install git on my system but it just fails every time with this message :
resolving dependencies...
looking for inter-conflicts...
Targets (2): perl-error-0.17011-1 git-1.6.1-1
Total Download Size: 6.61 MB
Total Installed Size: 14.29 MB
Proceed with installation? [Y/n] Y
:: Retrieving packages from extra...
error: failed retrieving file 'git-1.6.1-1-x86_64.pkg.tar.gz' from ftp.belnet.be : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'git-1.6.1-1-x86_64.pkg.tar.gz' from ftp.nluug.nl : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'git-1.6.1-1-x86_64.pkg.tar.gz' from ftp.belnet.be : File unavailable (e.g., file not found, no access)
warning: failed to retrieve some files from extra
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.
I've tried different mirrors and such but still the same error ?
Last edited by sylvarant (2009-02-02 14:03:30)

belnet.be seems to be out of sync for almost a week. Pick another mirror and copy it to the top of /etc/pacman.d/mirrorlist.

[SOLVED] Pacman won't install new packages.

# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
Targets (31): aisleriot-3.2.3.2-1 anki-2.0.3-1 bash-4.2.039-1 caribou-0.4.4-2
dconf-0.14.1-1 dhclient-4.2.4.2-1 gdm-3.6.1-2 glibmm-2.34.1-1
gmime-2.6.12-1 gnome-games-extra-data-3.2.0-2 gnome-shell-3.6.1-3
grantlee-0.3.0-1 gtksourceview3-3.6.1-1
ibus-anthy-1.4.99.20121006-1 libfm-1.1.0-2
libreoffice-common-3.6.3-1 libreoffice-en-US-3.6.3-1
libreoffice-impress-3.6.3-1 libreoffice-writer-3.6.3-1
libsecret-0.11-1 linux-3.6.5-1 linux-headers-3.6.5-1
obexd-client-1:0.46-1 pcmanfm-1.1.0-1 procps-ng-3.3.5-1
pyatspi-2.4.0-1 qt-4.8.3-5 thunar-1.4.0-3 wine-1.5.16-2
xdg-user-dirs-gtk-0.9-1 xmms2-0.8DrO_o-9
Total Download Size: 159.79 MiB
Total Installed Size: 677.33 MiB
Net Upgrade Size: 47.57 MiB
Proceed with installation? [Y/n] Y
:: Retrieving packages from core...
bash-4.2.039-1-i686 774.1 KiB 1292K/s 00:01 [########################] 100%
linux-3.6.5-1-i686 40.9 MiB 4.97M/s 00:08 [########################] 100%
linux-headers-3.6.5... 4.8 MiB 4.78M/s 00:01 [########################] 100%
procps-ng-3.3.5-1-i686 211.6 KiB 4.80M/s 00:00 [########################] 100%
:: Retrieving packages from extra...
dconf-0.14.1-1-i686 156.5 KiB 878K/s 00:00 [########################] 100%
aisleriot-3.2.3.2-1... 2.6 MiB 4.40M/s 00:01 [########################] 100%
pyatspi-2.4.0-1-any 42.9 KiB 12.1M/s 00:00 [########################] 100%
caribou-0.4.4-2-i686 130.7 KiB 3.61M/s 00:00 [########################] 100%
dhclient-4.2.4.2-1-i686 570.3 KiB 1104K/s 00:01 [########################] 100%
gdm-3.6.1-2-i686 994.1 KiB 1636K/s 00:01 [########################] 100%
glibmm-2.34.1-1-i686 671.6 KiB 1960K/s 00:00 [########################] 100%
gmime-2.6.12-1-i686 277.0 KiB 2.40M/s 00:00 [########################] 100%
gnome-games-extra-d... 1864.4 KiB 2.34M/s 00:01 [########################] 100%
gnome-shell-3.6.1-3... 984.0 KiB 2.86M/s 00:00 [########################] 100%
qt-4.8.3-5-i686 20.5 MiB 4.42M/s 00:05 [########################] 100%
grantlee-0.3.0-1-i686 303.6 KiB 4.78M/s 00:00 [########################] 100%
gtksourceview3-3.6.... 750.7 KiB 4.25M/s 00:00 [########################] 100%
libreoffice-en-US-3... 6.3 MiB 5.06M/s 00:01 [########################] 100%
libreoffice-common-... 53.3 MiB 6.34M/s 00:08 [########################] 100%
libreoffice-impress... 111.3 KiB 266K/s 00:00 [########################] 100%
libreoffice-writer-... 2.8 MiB 1542K/s 00:02 [########################] 100%
libsecret-0.11-1-i686 141.9 KiB 2.41M/s 00:00 [########################] 100%
obexd-client-1:0.46... 51.4 KiB 2.60M/s 00:00 [########################] 100%
thunar-1.4.0-3-i686 904.8 KiB 2.43M/s 00:00 [########################] 100%
xdg-user-dirs-gtk-0... 34.8 KiB 12.7M/s 00:00 [########################] 100%
:: Retrieving packages from community...
anki-2.0.3-1-any 1659.2 KiB 2.66M/s 00:01 [########################] 100%
ibus-anthy-1.4.99.2... 114.8 KiB 3.03M/s 00:00 [########################] 100%
libfm-1.1.0-2-i686 490.0 KiB 3.48M/s 00:00 [########################] 100%
pcmanfm-1.1.0-1-i686 159.6 KiB 3.85M/s 00:00 [########################] 100%
wine-1.5.16-2-i686 16.1 MiB 4.78M/s 00:03 [########################] 100%
xmms2-0.8DrO_o-9-i686 1428.0 KiB 5.72M/s 00:00 [########################] 100%
(31/31) checking package integrity [########################] 100%
(31/31) loading package files [########################] 100%
(31/31) checking for file conflicts [########################] 100%
error: failed to commit transaction (conflicting files)
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/Accessibility.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/Accessibility.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/Accessibility.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/__init__.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/__init__.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/__init__.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/appevent.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/appevent.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/appevent.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/constants.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/constants.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/constants.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/deviceevent.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/deviceevent.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/deviceevent.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/document.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/document.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/document.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/editabletext.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/editabletext.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/editabletext.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/enum.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/enum.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/enum.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/registry.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/registry.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/registry.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/role.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/role.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/role.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/state.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/state.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/state.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/text.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/text.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/text.pyo exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/utils.py exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/utils.pyc exists in filesystem
pyatspi: /usr/lib/python2.7/site-packages/pyatspi/utils.pyo exists in filesystem
Errors occurred, no packages were upgraded.
This is all I know.
Last edited by Invie (2012-11-05 22:44:40)

I had an issue like this during an update several months ago. Reflector was the problem package and the existing files were owned by reflector. I think it's worth mentioning since reflector is also a python package. Anyway, iirc I simply removed and reinstalled reflector.
Unfortunately, it won't be so easy for you since pyastpi is part of a dep-chain leading to gnome-shell... looks like you're going to have to figure out how to do it the right way
Last edited by alphaniner (2012-11-05 14:49:05)

[Solved]Pacman fails on sync

Hello there Archlinux folks!
Today, my beloved little home server, running Arch, was a real pain in the ... and I had to realize, the fact: I need the help of ppl who understand this better than I do.
As a related matter, I just bought a Network Media Player today, so I needed to modify my server a bit, like setup XBMC for upnp sharing, and Pacman showed me a "funny error message". With all due respect, I cannot reproduce the original anymore, - but it looked kinda same - since I tried to sync pacman with the repositories, and that somehow altered the current setup. Also tried to enable another repositories, but it did not helped.
Now if I try to install something, like # pacman -S xbmc the following error message is triggered:
[root@hoth estol]# pacman -S xbmc
függőségek feloldása...
belső ütközések keresése...
Célok (79): recode-3.6-6 enca-1.13-1 libmp4v2-1.9.1-1 faac-1.28-2
faad2-2.7-1 freetype2-2.4.4-2 fontconfig-2.8.0-1
fribidi-0.19.2-1 xextproto-7.1.2-1 libxext-1.2.0-1
libice-1.0.7-1 libsm-1.2.0-1 libxt-1.0.9-1 libxmu-1.1.0-1
inputproto-2.0.1-1 libxi-1.4.1-1 libdrm-2.4.23-2
xf86vidmodeproto-2.3.1-1 libxxf86vm-1.1.1-1 fixesproto-4.1.2-1
libxfixes-4.0.5-1 damageproto-1.2.1-1 libxdamage-1.1.3-1
libgl-7.10.0.git20110215-1 dri2proto-2.3-1 glproto-1.4.12-1
mesa-7.10.0.git20110215-1 glew-1.5.8-1 freeglut-2.6.0-1
jasper-1.900.1-6 libcddb-1.3.2-2 libcdio-0.82-1 libmad-0.15.1b-4
libmms-0.6-1 libmpeg2-0.5.1-1 libvorbis-1.3.2-1
alsa-lib-1.0.23-2 libsndfile-1.0.23-1 libsamplerate-0.1.7-1
xineramaproto-1.2.1-1 libxinerama-1.1.1-1 renderproto-0.11.1-1
libxrender-0.9.6-1 randrproto-1.3.2-1 libxrandr-1.3.1-1
recordproto-1.14.1-1 libxtst-1.2.0-1 sdl-1.2.14-6
sdl_image-1.2.10-2 libmikmod-3.1.12-3 smpeg-0.4.4-5
sdl_mixer-1.2.11-2 wavpack-4.60.1-1 mesa-demos-8.0.1-1
xf86dgaproto-2.1-1 libxxf86dga-1.1.2-1 compositeproto-0.4.2-1
libxcomposite-0.4.3-1 dmxproto-2.3.1-1 libdmx-1.1.1-1
xorg-xdpyinfo-1.2.0-1 xorg-xdriinfo-1.0.4-1 xorg-xev-1.1.0-1
xorg-xlsatoms-1.1.0-1 xcb-util-0.3.6-1 xorg-xlsclients-1.1.1-1
xorg-xprop-1.2.0-1 videoproto-2.3.1-1 libxv-1.0.6-1
xorg-xvinfo-1.1.1-1 xorg-xwininfo-1.1.1-1 xorg-utils-7.6-6
libmicrohttpd-0.9.7-1 libssh-0.4.8-1 libva-1.0.8-1
libmodplug-0.8.8.1-1 rtmpdump-2.3-3 lsb-release-1.4-10
xbmc-10.0-4
Teljes letöltendő méret: 39,00 MB
Teljes telepített méret: 133,01 MB
Kezdődhet a telepítés? [I/n] I
:: Csomagok letöltése a(z) extra repóból...
hiba: nem sikerült a(z) 'recode-3.6-6-i686.pkg.tar.xz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
hiba: nem sikerült a(z) 'enca-1.13-1-i686.pkg.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
^Chiba: nem sikerült a(z) 'faad2-2.7-1-i686.pkg.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
Interrupt signal received
Sorry about the language, it is localized for Hungarian.
hint:
hiba is for error
letölteni is for download
Teljes is for total
Telepít(telepítés, telepített) is for install(installing, installed)
Then I interrupt it, since it takes a long time.
The most confusing part is, that even a simple management command - like # pacman -Syu - is also triggering an error:
[root@hoth estol]# pacman -Syu
:: A csomagadatbázisok szinkronizálása...
hiba: nem sikerült a(z) 'core.db.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
hiba: nem sikerült a(z) core frissítése (No address record)
^Chiba: nem sikerült a(z) 'extra.db.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
Interrupt signal received
Some technical details about the machine:
[estol@hoth ~]$ uname -a
Linux hoth 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
[estol@hoth ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 747.685
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pse36 mmx fxsr sse up
bogomips : 1495.67
clflush size : 32
cache_alignment : 32
address sizes : 36 bits physical, 32 bits virtual
power management:
Also the recent Pacman log,
[2011-02-21 00:51] Running 'pacman -Syu'
[2011-02-21 00:51] synchronizing package lists
[2011-02-21 00:51] starting full system upgrade
[2011-02-21 00:52] upgraded tzdata (2010o-1 -> 2011b-1)
[2011-02-21 00:52] Generating locales...
[2011-02-21 00:52] en_US.UTF-8... done
[2011-02-21 00:52] en_US.ISO-8859-1... done
[2011-02-21 00:52] hu_HU.UTF-8... done
[2011-02-21 00:52] hu_HU.ISO-8859-2... done
[2011-02-21 00:52] Generation complete.
[2011-02-21 00:53] upgraded glibc (2.13-1 -> 2.13-4)
[2011-02-21 00:53] warning: /etc/bash.bashrc installed as /etc/bash.bashrc.pacnew
[2011-02-21 00:53] upgraded bash (4.1.009-3 -> 4.1.009-4)
[2011-02-21 00:53] upgraded binutils (2.21-3 -> 2.21-4)
[2011-02-21 00:53] upgraded curl (7.21.3-1 -> 7.21.4-2)
[2011-02-21 00:53] upgraded db (5.1.19-3 -> 5.1.25-1)
[2011-02-21 00:53] upgraded udev (165-1 -> 166-2)
[2011-02-21 00:53] upgraded device-mapper (2.02.82-2 -> 2.02.84-1)
[2011-02-21 00:53] >>> Updating module dependencies. Please wait ...
[2011-02-21 00:53] >>> MKINITCPIO SETUP
[2011-02-21 00:53] >>> ----------------
[2011-02-21 00:53] >>> If you use LVM2, Encrypted root or software RAID,
[2011-02-21 00:53] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-02-21 00:53] >>> More information about mkinitcpio setup can be found here:
[2011-02-21 00:53] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-02-21 00:53]
[2011-02-21 00:53] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-02-21 00:53] ==> Building image "default"
[2011-02-21 00:53] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-02-21 00:53] :: Begin build
[2011-02-21 00:53] :: Parsing hook [base]
[2011-02-21 00:53] :: Parsing hook [udev]
[2011-02-21 00:53] :: Parsing hook [autodetect]
[2011-02-21 00:53] :: Parsing hook [pata]
[2011-02-21 00:54] :: Parsing hook [scsi]
[2011-02-21 00:54] :: Parsing hook [sata]
[2011-02-21 00:54] :: Parsing hook [filesystems]
[2011-02-21 00:54] :: Generating module dependencies
[2011-02-21 00:54] :: Generating image '/boot/kernel26.img'...SUCCESS
[2011-02-21 00:54] ==> SUCCESS
[2011-02-21 00:54] ==> Building image "fallback"
[2011-02-21 00:54] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-02-21 00:54] :: Begin build
[2011-02-21 00:54] :: Parsing hook [base]
[2011-02-21 00:54] :: Parsing hook [udev]
[2011-02-21 00:54] :: Parsing hook [pata]
[2011-02-21 00:54] :: Parsing hook [scsi]
[2011-02-21 00:56] :: Parsing hook [sata]
[2011-02-21 00:56] :: Parsing hook [filesystems]
[2011-02-21 00:57] :: Generating module dependencies
[2011-02-21 00:57] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2011-02-21 00:57] ==> SUCCESS
[2011-02-21 00:57] upgraded kernel26 (2.6.37-5 -> 2.6.37.1-1)
[2011-02-21 00:57] upgraded libldap (2.4.23-1 -> 2.4.24-1)
[2011-02-21 00:57] upgraded lvm2 (2.02.82-2 -> 2.02.84-1)
[2011-02-21 00:57] upgraded mc (4.7.4-1 -> 4.7.5.1-1)
[2011-02-21 00:57] warning: /etc/ntp.conf installed as /etc/ntp.conf.pacnew
[2011-02-21 00:57] warning: /etc/conf.d/ntp-client.conf installed as /etc/conf.d/ntp-client.conf.pacnew
[2011-02-21 00:57] upgraded ntp (4.2.6.p2-1 -> 4.2.6.p3-1)
[2011-02-21 00:57] upgraded ppp (2.4.5-1 -> 2.4.5-2)
[2011-02-21 00:57] upgraded syslog-ng (3.2.1-1 -> 3.2.2-1)
[2011-02-21 00:57] upgraded vi (050325-3 -> 050325-4)
[2011-02-21 00:57] upgraded wget (1.12-3 -> 1.12-4)
[2011-02-21 19:57] Running 'pacman -U'
[2011-03-04 19:42] Running 'pacman -S ushare'
[2011-03-04 19:44] Running 'pacman -S ushare'
[2011-03-04 19:44] Running 'pacman -S ushare'
[2011-03-04 19:46] Running 'pacman -S ushare'
[2011-03-04 19:46] Running 'pacman -S mediatomb'
[2011-03-04 19:47] Running 'pacman -S mediatomb'
[2011-03-04 19:49] Running 'pacman -S ushare'
[2011-03-04 19:57] Running 'pacman -S ushare'
[2011-03-04 20:00] Running 'pacman -S ushare'
[2011-03-04 20:01] Running 'pacman -S ushare'
[2011-03-04 20:08] Running 'pacman -S ushare'
[2011-03-04 20:14] Running 'pacman -S ushare'
[2011-03-04 20:16] Running 'pacman -S ushare'
[2011-03-04 20:21] Running 'pacman -S ushare'
[2011-03-04 21:05] Running 'pacman -S ushare'
[2011-03-04 21:12] Running 'pacman -S ushare'
[2011-03-04 21:13] Running 'pacman -S mediatomb'
[2011-03-04 21:17] Running 'pacman -S ushare'
[2011-03-04 22:51] Running 'pacman -S ushare'
[2011-03-05 01:42] Running 'pacman -Sy xbmc'
[2011-03-05 01:42] synchronizing package lists
[2011-03-05 01:43] Running 'pacman -Syu'
[2011-03-05 01:43] synchronizing package lists
[2011-03-05 01:49] Running 'pacman -Syu'
[2011-03-05 01:49] synchronizing package lists
[2011-03-05 01:53] Running 'pacman -U'
[2011-03-05 01:53] Running 'pacman -U'
[2011-03-05 02:02] Running 'pacman -Syu'
[2011-03-05 02:02] synchronizing package lists
[2011-03-05 02:09] Running 'pacman -S xmbc'
[2011-03-05 02:11] Running 'pacman -S xmbc'
[2011-03-05 02:11] Running 'pacman -S xmbc'
[2011-03-05 02:12] Running 'pacman -Syu'
[2011-03-05 02:12] synchronizing package lists
[2011-03-05 02:17] Running 'pacman -S xbmc'
The first entry is the last known use of Pacman, that was successful.
All help would be highly appreciated.
estol
Last edited by estol (2011-03-05 03:51:48)

@skunktrader: yes, I tried, no it did not helped.
@karol: mea culpa, mea maxima culpa, a friend of mine hooked me up with this distro, and set it to be hungarian as default, now I know how to change it - to be honest, this language annoys the crap out of me.
@TigTex: yes, the host is alive, I can even browse the contents.
Thanks for all the help, as it turned out, the problem was hardware related. Time to put her down.
Last edited by estol (2011-03-05 03:52:39)

[SOLVED]pacman fails to install mtpaint

Similar Messages

Maybe you are looking for