[SOLVED]pacman.log filled with "[PACMAN] starting full system upgrade"

Today i just ran pacman -Suy, but now the log is filled with:
Gozer ~ # tail /var/log/pacman.log -n 100
[2013-04-08 12:26] [PACMAN] upgraded youtube-dl (2013.02.25-1 -> 2013.04.03-1)
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:27] [PACMAN] starting full system upgrade
[2013-04-08 12:28] [PACMAN] starting full system upgrade
[2013-04-08 12:28] [PACMAN] starting full system upgrade
[2013-04-08 13:06] [PACMAN] starting full system upgrade
Gozer ~ # grep '2013-04-08' /var/log/pacman.log |grep "starting full system upgrade" | wc -l
637
Is this a bug?
Last edited by kokoko3k (2013-04-08 12:57:01)

Edit: are you using some system update monitoring script?
Ops... big "OPS".
You are right, sorry!

Similar Messages

  • Pacman -Qe Broken after today´s "full system upgrade"

    From "pacman.log"
    synchronizing package lists
    [2008-01-17 18:04] starting full system upgrade
    [2008-01-17 18:05] upgraded gnome-keyring (2.20.2-1 -> 2.20.3-1)
    [2008-01-17 18:06] >>>
    [2008-01-17 18:06] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
    [2008-01-17 18:06] >>>
    [2008-01-17 18:06] >>> Updating module dependencies. Please wait ...
    [2008-01-17 18:06] >>> MKINITCPIO SETUP
    [2008-01-17 18:06] >>> ----------------
    [2008-01-17 18:06] >>> If you use LVM2, Encrypted root or software RAID,
    [2008-01-17 18:06] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2008-01-17 18:06] >>> More information about mkinitcpio setup can be found here:
    [2008-01-17 18:06] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2008-01-17 18:06]
    [2008-01-17 18:06] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2008-01-17 18:06] ==> Building image "default"
    [2008-01-17 18:06] ==> Running command: /sbin/mkinitcpio -k 2.6.23-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2008-01-17 18:06] :: Begin build
    [2008-01-17 18:06] :: Parsing hook [base]
    [2008-01-17 18:06] :: Parsing hook [autodetect]
    [2008-01-17 18:06] :: Generating module dependencies
    [2008-01-17 18:06] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2008-01-17 18:06] ==> SUCCESS
    [2008-01-17 18:06] ==> Building image "fallback"
    [2008-01-17 18:06] ==> Running command: /sbin/mkinitcpio -k 2.6.23-ARCH -c /etc/mkinitcpio.d/kernel26-fallback.conf -g /boot/kernel26-fallback.img
    [2008-01-17 18:06] :: Begin build
    [2008-01-17 18:06] :: Parsing hook [base]
    [2008-01-17 18:06] :: Parsing hook [udev]
    [2008-01-17 18:06] :: Parsing hook [ide]
    [2008-01-17 18:06] :: Parsing hook [pata]
    [2008-01-17 18:06] :: Parsing hook [scsi]
    [2008-01-17 18:06] :: Parsing hook [sata]
    [2008-01-17 18:06] :: Parsing hook [usbinput]
    [2008-01-17 18:06] :: Parsing hook [raid]
    [2008-01-17 18:06] :: Parsing hook [filesystems]
    [2008-01-17 18:07] :: Generating module dependencies
    [2008-01-17 18:07] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2008-01-17 18:07] ==> SUCCESS
    [2008-01-17 18:07] upgraded kernel26 (2.6.23.12-3 -> 2.6.23.14-1)
    [2008-01-17 18:07] upgraded libgtop (2.20.0-1 -> 2.20.1-1)
    [2008-01-17 18:07] upgraded libwnck (2.20.2-1 -> 2.20.3-1)
    [2008-01-17 18:07] upgraded vte (0.16.11-1 -> 0.16.12-1)
    [2008-01-17 18:07] upgraded xorg-xinit (1.0.7-2 -> 1.0.7-3)
    Result when using "pacman -Qe" afterwards.
    pacman -Qe
    alsa-lib 1.0.15-1
    alsa-oss 1.0.15-1
    alsa-plugins 1.0.15-1
    alsa-utils 1.0.15-2
    autoconf 2.61-3
    automake 1.10-3
    bin86 0.16.17-3
    bison 2.3-4
    bzip2 1.0.4-3
    catfish 0.3-1
    ccsm 0.6.0-2
    compiz-fusion-plugins-extra 0.6.0-2
    compiz-fusion-plugins-main 0.6.0-3
    compizconfig-backend-gconf 0.6.0-2
    conky 1.4.9-1
    cpio 2.9-3
    csup 20060318-5
    curl 7.17.1-1
    dbus 1.0.2-4
    e2fsprogs 1.40.3-1
    ed 0.8-3
    emerald 0.6.0-3
    emerald-themes 0.6.0-2
    epdfview 0.1.6-5
    exo 0.3.4-1
    fcron 3.0.4-1
    file 4.23-1
    filesystem 2007.11-3
    findutils 4.2.31-3
    firefox 2.0.0.11-1
    flashplugin 9.0.115.0-1
    flex 2.5.33-3
    fusion-icon 20071111-1
    galculator 1.3.1-1
    gawk 3.1.6-2
    gettext 0.17-1
    gksu 2.0.0-2
    gnome-icon-theme 2.20.0-1
    gqview 2.0.4-1
    grep 2.5.3-3
    groff 1.19.2-3
    grub 0.97-9
    gtk-xfce-engine 2.4.2-1
    gzip 1.3.12-4
    hardinfo 0.4.2.3-1
    hdparm 7.7-3
    hwd 5.3.1-1
    hwdetect 0.9-1
    initscripts 2007.11-2
    iptables 1.3.8-2
    iputils 20070202-3
    jacman 0.4-2
    jre 6u3-2
    kbd 1.12.20070827-2
    kernel26 2.6.23.14-1
    less 418-1
    libdca 0.0.5-1
    libpcap 0.9.8-2
    libtool 1.5.24-3
    libusb 0.1.12-3
    libxfce4mcs 4.4.2-1
    libxfce4util 4.4.2-1
    libxfcegui4 4.4.2-1
    licenses 2.2-2
    lilo 22.8-2
    lshwd 1.1.3-5
    lzo2 2.02-3
    lzop 1.02rc1-3
    make 3.81-3
    man 1.6f-1
    man-pages 2.74-1
    mc 4.6.1-4
    mesa 7.0.1-1
    mkinitcpio 0.5.17-1
    mktemp 1.5-3
    mlocate 0.18-2
    module-init-tools 3.2.2-5
    mousepad 0.2.13-1
    mplayer 1.0rc2-1
    mplayer-plugin 3.45-1
    nano 2.0.7-1
    net-tools 1.60-13
    numlockx 1.1-3
    nvidia-96xx 96.43.01-6
    openal 0.0.8-4
    openssl 0.9.8g-2
    pacman 3.1.0-1
    pacworld 0.3.4-2
    patch 2.5.4-4
    pcmciautils 014-3
    pidgin 2.3.1-1
    pkgconfig 0.22-3
    ppp 2.4.4-6
    procinfo 19-2
    procps 3.2.7-4
    psmisc 22.6-1
    pyqt4 4.3.3-1
    pyxdg 0.15-1
    qca 1.0-3
    qca-tls 1.0-3
    rarian 0.6.0-1
    reiserfsprogs 3.6.20-3
    rp-pppoe 3.8-2
    rpmextract 0-1
    schismtracker 0.5rc1-1
    scite 1.75-1
    sdl_image 1.2.6-1
    sdl_mixer 1.2.8-1
    seamonkey 1.1.5-2
    skype 2.0.0.27-1
    slim 1.3.0-2
    slim-themes 1.2.3-2
    squeeze 0.2.2-1
    sudo 1.6.9p10-3
    syslog-ng 2.0.6-1
    sysvinit 2.86-4
    tar 1.19-2
    terminal 0.2.8-1
    terminatorx 3.82-1
    thunar 0.9.0-2
    thunar-archive-plugin 0.2.4-5
    thunar-volman 0.2.0-1
    ttf-ms-fonts 2.0-1
    tuxcards 2.0-1
    udev 116-3
    unclutter 8-4
    unrar 3.7.8-1
    unzip 5.52-3
    util-linux-ng 2.13.0.1-2
    vim 7.1.156-1
    vlc 0.8.6d-1
    wget 1.10.2-4
    which 2.17-2
    xcursor-grounation 0.3-5
    xfce-mcs-manager 4.4.2-1
    xfce-mcs-plugins 4.4.2-1
    xfce-utils 4.4.2-1
    xfce4-appfinder 4.4.2-1
    xfce4-cpugraph-plugin 0.4.0-1
    xfce4-genmon-plugin 3.1-4
    xfce4-icon-theme 4.4.2-1
    xfce4-mixer 4.4.2-1
    xfce4-netload-plugin 0.4.0-4
    xfce4-panel 4.4.2-1
    xfce4-screenshooter-plugin 1.0.0-5
    xfce4-session 4.4.2-1
    xfce4-taskmanager 0.3.2-4
    xfdesktop 4.4.2-1
    xfprint 4.4.2-1
    xfwm4 4.4.2-1
    xfwm4-themes 4.4.2-1
    xmms 1.2.11-1
    xorg-fonts-type1 1.0.1-1
    xorg-twm 1.0.1-2
    xterm 229-2
    zip 2.32-1
    WEIRD, BUG or ???

    After reading your reply, I checked "man pacman" and it changed as you said!
    so I did a "pacman -Qt" to look for orphans and this is the result.
    alsa-oss 1.0.15-1
    alsa-plugins 1.0.15-1
    alsa-utils 1.0.15-2
    autoconf 2.61-3
    automake 1.10-3
    bin86 0.16.17-3
    bison 2.3-4
    catfish 0.3-1
    ccsm 0.6.0-2
    compiz-fusion-plugins-extra 0.6.0-2
    compizconfig-backend-gconf 0.6.0-2
    conky 1.4.9-1
    csup 20060318-5
    docbook-xml 4.5-1
    emerald-themes 0.6.0-2
    epdfview 0.1.6-5
    findutils 4.2.31-3
    firefox 2.0.0.11-1
    flashplugin 9.0.115.0-1
    flex 2.5.33-3
    fusion-icon 20071111-1
    galculator 1.3.1-1
    gettext 0.17-1
    gksu 2.0.0-2
    gnome-icon-theme 2.20.0-1
    gqview 2.0.4-1
    grub 0.97-9
    gtk-xfce-engine 2.4.2-1
    hardinfo 0.4.2.3-1
    hdparm 7.7-3
    hwd 5.3.1-1
    hwdetect 0.9-1
    initscripts 2007.11-2
    iptables 1.3.8-2
    iputils 20070202-3
    jacman 0.4-2
    kbd 1.12.20070827-2
    libsigc++2.0 2.1.1-1
    libtool 1.5.24-3
    licenses 2.2-2
    lilo 22.8-2
    lshwd 1.1.3-5
    lzo 1.08-4
    lzop 1.02rc1-3
    make 3.81-3
    man 1.6f-1
    man-pages 2.74-1
    mc 4.6.1-4
    mlocate 0.18-2
    mousepad 0.2.13-1
    mplayer-plugin 3.45-1
    nano 2.0.7-1
    numlockx 1.1-3
    nvidia-96xx 96.43.01-6
    openal 0.0.8-4
    pacman 3.1.0-1
    pacworld 0.3.4-2
    patch 2.5.4-4
    pcmciautils 014-3
    pidgin 2.3.1-1
    pkgconfig 0.22-3
    procinfo 19-2
    psmisc 22.6-1
    pyqt4 4.3.3-1
    qca-tls 1.0-3
    reiserfsprogs 3.6.20-3
    rp-pppoe 3.8-2
    rpmextract 0-1
    schismtracker 0.5rc1-1
    scite 1.75-1
    sdl_image 1.2.6-1
    sdl_mixer 1.2.8-1
    seamonkey 1.1.5-2
    skype 2.0.0.27-1
    slim-themes 1.2.3-2
    squeeze 0.2.2-1
    sudo 1.6.9p10-3
    syslog-ng 2.0.6-1
    sysvinit 2.86-4
    tar 1.19-2
    terminal 0.2.8-1
    terminatorx 3.82-1
    thunar-archive-plugin 0.2.4-5
    thunar-volman 0.2.0-1
    ttf-ms-fonts 2.0-1
    tuxcards 2.0-1
    unclutter 8-4
    unrar 3.7.8-1
    unzip 5.52-3
    vim 7.1.156-1
    vlc 0.8.6d-1
    which 2.17-2
    xcursor-grounation 0.3-5
    xf86-input-keyboard 1.2.2-2
    xf86-input-mouse 1.2.3-1
    xf86-video-vesa 1.3.0-5
    xfce-mcs-plugins 4.4.2-1
    xfce-utils 4.4.2-1
    xfce4-appfinder 4.4.2-1
    xfce4-cpugraph-plugin 0.4.0-1
    xfce4-genmon-plugin 3.1-4
    xfce4-icon-theme 4.4.2-1
    xfce4-mixer 4.4.2-1
    xfce4-netload-plugin 0.4.0-4
    xfce4-screenshooter-plugin 1.0.0-5
    xfce4-session 4.4.2-1
    xfce4-taskmanager 0.3.2-4
    xfdesktop 4.4.2-1
    xfprint 4.4.2-1
    xfwm4-themes 4.4.2-1
    xmms 1.2.11-1
    xorg-fonts-type1 1.0.1-1
    xorg-twm 1.0.1-2
    xorg-xinit 1.0.7-3
    xterm 229-2
    zip 2.32-1
    It shows less packages, yet this are not orphans :-(
    Also in "man pacman" it says "(-Qet is equivalent to the pacman 2.9.X -Qe option.)"
    pacman -Qet
    alsa-oss 1.0.15-1
    alsa-plugins 1.0.15-1
    alsa-utils 1.0.15-2
    autoconf 2.61-3
    automake 1.10-3
    bin86 0.16.17-3
    bison 2.3-4
    catfish 0.3-1
    ccsm 0.6.0-2
    compiz-fusion-plugins-extra 0.6.0-2
    compizconfig-backend-gconf 0.6.0-2
    conky 1.4.9-1
    csup 20060318-5
    emerald-themes 0.6.0-2
    epdfview 0.1.6-5
    findutils 4.2.31-3
    firefox 2.0.0.11-1
    flashplugin 9.0.115.0-1
    flex 2.5.33-3
    fusion-icon 20071111-1
    galculator 1.3.1-1
    gettext 0.17-1
    gksu 2.0.0-2
    gnome-icon-theme 2.20.0-1
    gqview 2.0.4-1
    grub 0.97-9
    gtk-xfce-engine 2.4.2-1
    hardinfo 0.4.2.3-1
    hdparm 7.7-3
    hwd 5.3.1-1
    hwdetect 0.9-1
    initscripts 2007.11-2
    iptables 1.3.8-2
    iputils 20070202-3
    jacman 0.4-2
    kbd 1.12.20070827-2
    libtool 1.5.24-3
    licenses 2.2-2
    lilo 22.8-2
    lshwd 1.1.3-5
    lzop 1.02rc1-3
    make 3.81-3
    man 1.6f-1
    man-pages 2.74-1
    mc 4.6.1-4
    mlocate 0.18-2
    mousepad 0.2.13-1
    mplayer-plugin 3.45-1
    nano 2.0.7-1
    numlockx 1.1-3
    nvidia-96xx 96.43.01-6
    openal 0.0.8-4
    pacman 3.1.0-1
    pacworld 0.3.4-2
    patch 2.5.4-4
    pcmciautils 014-3
    pidgin 2.3.1-1
    pkgconfig 0.22-3
    procinfo 19-2
    psmisc 22.6-1
    pyqt4 4.3.3-1
    qca-tls 1.0-3
    reiserfsprogs 3.6.20-3
    rp-pppoe 3.8-2
    rpmextract 0-1
    schismtracker 0.5rc1-1
    scite 1.75-1
    sdl_image 1.2.6-1
    sdl_mixer 1.2.8-1
    seamonkey 1.1.5-2
    skype 2.0.0.27-1
    slim-themes 1.2.3-2
    squeeze 0.2.2-1
    sudo 1.6.9p10-3
    syslog-ng 2.0.6-1
    sysvinit 2.86-4
    tar 1.19-2
    terminal 0.2.8-1
    terminatorx 3.82-1
    thunar-archive-plugin 0.2.4-5
    thunar-volman 0.2.0-1
    ttf-ms-fonts 2.0-1
    tuxcards 2.0-1
    unclutter 8-4
    unrar 3.7.8-1
    unzip 5.52-3
    vim 7.1.156-1
    vlc 0.8.6d-1
    which 2.17-2
    xcursor-grounation 0.3-5
    xfce-mcs-plugins 4.4.2-1
    xfce-utils 4.4.2-1
    xfce4-appfinder 4.4.2-1
    xfce4-cpugraph-plugin 0.4.0-1
    xfce4-genmon-plugin 3.1-4
    xfce4-icon-theme 4.4.2-1
    xfce4-mixer 4.4.2-1
    xfce4-netload-plugin 0.4.0-4
    xfce4-screenshooter-plugin 1.0.0-5
    xfce4-session 4.4.2-1
    xfce4-taskmanager 0.3.2-4
    xfdesktop 4.4.2-1
    xfprint 4.4.2-1
    xfwm4-themes 4.4.2-1
    xmms 1.2.11-1
    xorg-fonts-type1 1.0.1-1
    xorg-twm 1.0.1-2
    xterm 229-2
    zip 2.32-1
    Now I am lost, hahhahahahahaahahahahahaha

  • [SOLVED] Starting Full System Upgrade... There Is Nothing To Do

    "Starting Full System Upgrade... There Is Nothing To Do" is the only message I have ever seen when using pacman -Syu.  I have no problem installing files but pacman cannot seem to EVER find updates to anything.  Even when I know that a package has been updated in the repositories, pacman never acknowledges it.  Some examples of applications are:
    Python2 - Installed - 2.6.5-3, Available - 2.7.1-4
    Geany - Installed 0.19-1, Available - 0.20-1
    Pacman - Installed 3.4.0-2, Available - 3.4.2-1
    Even if I try to specify the repository, for Geany for instance, "pacman -S community/geany", it still sees it as up-to-date.
    It's quite possible that I'm going about something the wrong way but I don't ever recall the system actually finding updates (since June).  My pacman.conf looks as follows:
    MOD EDIT -- Please use code tags to display any output and of files -- Inxsible
    Any help would be greatly appreciated.
    Last edited by 24sHD (2011-01-13 15:55:34)

    Also try to read the wiki about pacman and mirrorlist. Simply uncommenting multiple mirrors does not give you the ability to get packages from all of them. pacman will connect to each one in order. If it can connect to the first one and see that pacman is available it does not connect to the next mirror to see if some other mirror has an updated version of not.
    It connects to the next mirror if and only if a certain package is not available on the first mirror or the mirror itself is down.

  • Starting full system upgrade... there is nothing to do

    Just finished my Install of Arch and I can't seem to update anything it just gives me "Starting full system upgrade...
    there is nothing to do"
    I tried pacman -Syy and it syncs my repos and I've checked and I do have packages that are out of date so they should upodate. My mirrors are also not out of date, I just checked them

    Please paste the pull output pacman -S openbox. I think you'll find something along the lines of:
    warning: openbox-3.5.0-7 is up to date -- reinstalling
    The following will tell you which version you have installed
    $ pacman -Q openbox
    The current version is 3.5.0-7, which you can see here: https://www.archlinux.org/packages/comm … 4/openbox/

  • [Solved] Full system upgrade fails because of Nvidia dependencies

    Problem:
    # pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for conflicting packages...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: nvidia-dkms: requires nvidia-utils=346.35
    Things I have tried:
    $ makepkg -s
    ==> Making package: nvidia-dkms 346.47-1 (Sun Mar 1 11:42:11 PST 2015)
    ==> Checking runtime dependencies...
    ==> Installing missing dependencies...
    [sudo] password for digger:
    resolving dependencies...
    looking for conflicting packages...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: nvidia-dkms: requires nvidia-utils=346.35
    ==> ERROR: 'pacman' failed to install missing dependencies.
    # pacman -R nvidia-utils
    checking dependencies...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: nvidia-dkms: requires nvidia-utils=346.35
    :: nvidia-libgl: requires nvidia-utils
    Some info:
    $ uname -a
    Linux <hostname> 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
    # dkms status
    nvidia, 346.35, 3.18.5-1-ARCH, x86_64: installed
    nvidia, 346.35, 3.18.6-1-ARCH, x86_64: installed
    $ lspci -k | grep -A 2 -i "VGA"
    03:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 640] (rev a1)
    Subsystem: eVga.com. Corp. Device 2643
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    Subsystem: eVga.com. Corp. Device 2643
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    # pacman -Ss nvidia | grep installed
    extra/libvdpau 0.9-1 [installed]
    extra/nvidia-libgl 346.47-2 [installed: 346.35-2]
    extra/nvidia-utils 346.47-2 [installed: 346.35-2]
    # cat /etc/mkinitcpio.conf | grep ^HOOKS
    HOOKS="base udev autodetect modconf block lvm2 nvidia filesystems keyboard fsck"
    # systemctl status dkms
    ● dkms.service - Dynamic Kernel Modules System
    Loaded: loaded (/usr/lib/systemd/system/dkms.service; enabled; vendor preset: disabled)
    Active: active (exited) since Sun 2015-03-01 11:40:15 PST; 1h 43min ago
    Process: 6196 ExecStart=/usr/lib/systemd/scripts/dkms start (code=exited, status=0/SUCCESS)
    Main PID: 6196 (code=exited, status=0/SUCCESS)
    CGroup: /system.slice/dkms.service
    # pacman -Qm | grep nvidia
    nvidia-dkms 346.35-2
    nvidia-hook 2.2-3
    Let me know if any other information is needed.
    Thanks.
    Last edited by digger (2015-03-03 03:12:52)

    The fix, thanks to Xabre
    # pacman -R nvidia-dkms
    checking dependencies...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: nvidia-hook: requires nvidia-dkms
    # pacman -Rs nvidia-dkms
    checking dependencies...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: nvidia-hook: requires nvidia-dkms
    [root@big-kahuna ~]# pacman -Rdd nvidia-dkms
    Packages (1) nvidia-dkms-346.35-2
    Total Removed Size: 12.29 MiB
    :: Do you want to remove these packages? [Y/n] Y
    -------- Uninstall Beginning --------
    Module: nvidia
    Version: 346.35
    Kernel: 3.18.5-1-ARCH (x86_64)
    Status: Before uninstall, this module version was ACTIVE on this kernel.
    nvidia.ko:
    - Uninstallation
    - Deleting from: /usr/lib/modules/3.18.5-1-ARCH/kernel/drivers/video/
    - Original module
    - No original module was found for this module on this kernel.
    - Use the dkms install command to reinstall any previous module version.
    nvidia-uvm.ko:
    - Uninstallation
    - Deleting from: /usr/lib/modules/3.18.5-1-ARCH/kernel/drivers/video/
    - Original module
    - No original module was found for this module on this kernel.
    - Use the dkms install command to reinstall any previous module version.
    depmod....
    DKMS: uninstall completed.
    -------- Uninstall Beginning --------
    Module: nvidia
    Version: 346.35
    Kernel: 3.18.6-1-ARCH (x86_64)
    Status: Before uninstall, this module version was ACTIVE on this kernel.
    nvidia.ko:
    - Uninstallation
    - Deleting from: /usr/lib/modules/3.18.6-1-ARCH/kernel/drivers/video/
    - Original module
    - No original module was found for this module on this kernel.
    - Use the dkms install command to reinstall any previous module version.
    nvidia-uvm.ko:
    - Uninstallation
    - Deleting from: /usr/lib/modules/3.18.6-1-ARCH/kernel/drivers/video/
    - Original module
    - No original module was found for this module on this kernel.
    - Use the dkms install command to reinstall any previous module version.
    depmod.....
    DKMS: uninstall completed.
    Deleting module version: 346.35
    completely from the DKMS tree.
    Done.
    (1/1) removing nvidia-dkms [######################] 100%
    # pacman -Syu ### This ran as expected.
    All I wanted was to have the simplest use of the Nvidia proprietary driver.  So I followed https://wiki.archlinux.org/index.php/NV … any_kernel
    So what I gather from the discussion here is that this (nvidia-dkms) should only be used for custom kernels?  And the topic should be a sub topic of https://wiki.archlinux.org/index.php/NV … tom_kernel?  Is that right?
    Thanks for you help.
    Last edited by digger (2015-03-03 03:11:58)

  • Dependancy trouble when performing full system upgrade

    Below is the output from pacman:
    :: Starting full system upgrade...
    :: Replace esd with extra/esound? [Y/n] y
    :: Replace synaptics with extra/xf86-input-synaptics? [Y/n] y
    resolving dependencies...
    warning: dependency cycle detected:
    warning: xorg-server will be installed before its catalyst-utils dependency
    looking for inter-conflicts...
    warning: removing 'libgl' from target list because it conflicts with 'catalyst-utils'
    error: failed to prepare transaction (could not satisfy dependencies)
    :: xf86-video-ati: requires libgl>=7.2
    Checked the news and theads on here and not seen anyone with simular problems so I'm really not quite sure how to tackle this one...

    sorry, i should have added a bit more detail about my setup:
    it's an ASUS X51RL-series laptop. It has an ATI radeon xpress 1100 GFX chip.
    I'm running KDE4 + compiz-fusion
    I'm guessing the problem is related to the xorg upgrade? Beyond that I'm not sure how best to address the dependances.

  • X do not start after full system upgrade - [SOLVED]

    hi all,
    i did a full system upgrade yesterday, and after that, arch doesn't start..
    the error itself:
    X: error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
    any help on this? want to get off of bloated ubuntu
    installed packages: http://pastebin.archlinux.org/15106
    Last edited by ivan (2007-09-25 13:49:57)

    I have the same issue also. Something told me not to reboot but I did because I wanted to use my rt-kernel.
    yes, please help because I too have to use Ubuntu-Studio and SuSE's JAD. Both way too bloated and not as fast as Arch..
    I tried to fix the xorg.conf but nothing.

  • [solved] After a full-system upgrade (Linux 3.15.8) = Wifi undetected

    Hi, following this post, I'm seeking help concerning a big problem with my wifi.
    In fact, it has been a few months since my wifi interface isn't recognized anymore. Yesterday, after a few tests, I found it was due to the kernel version, so I tried to reinstall my first ArchLinux (Linux 3.13.5-1-ARCH) : it worked, my wifi was back. The problem was that I couldn't reinstall all my stuffs : so I did a full-system upgrade (knowing I will lose my wifi) and now I just want to fix it once and for all (I'm done dealing with it).
    So now, your help would be very appreciated. Does anyone have an idead? Or need more details about my config, my laptop, or whatever?
    Last edited by nugetchar (2014-08-09 20:30:44)

    Okay then, here we go :
    When I do a
    lspci
    I have the following output :
    [nugetchar@arch ~]$ lspci
    00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
    00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
    00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
    01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
    03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
    0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
    So, as you can see, the Network Controller is the following :
    03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
    When I do a
    ip link
    this is what I obtain :
    [nugetchar@arch ~]$ ip link
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
    link/ether f0:1f:af:25:3b:13 brd ff:ff:ff:ff:ff:ff
    6: enp0s20u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 6e:d6:2d:5c:29:bd brd ff:ff:ff:ff:ff:ff
    I started reading this page but am not sure if it is relevant due to the fact it concerns the 3.8.2B version.
    Finally, a
    more /etc/modprobe.d/modprobe.conf
    gives me the following output :
    ^C[nugetchar@arch ~]$ more /etc/modprobe.d/modprobe.conf
    alias floppy off
    blacklist fd0
    blacklist floppy
    blacklist ipv6
    blacklist bcma
    blacklist pcspkr
    blacklist snd_pcsp
    I think I need to unblacklist bcma ?
    @ewaller : I just saw you reply, here is the output for ls /lib/modules
    [nugetchar@arch ~]$ ls /lib/modules
    3.15.8-1-ARCH extramodules-3.13-ARCH extramodules-3.15-ARCH
    Thank you for your answers, I really appreciate it

  • [SOLVED] GNOME is messed up after full system upgrade

    I ran a full system upgrade today (last one was about 1-2 months ago) and it went smoothly.
    Everything boots normally, and my default GNOME desktop also boots, but all the icons are messed up, as can be seen in this screenshot.
    And worst, the overlay panel (e.g. when pressing the Windows key) is completely b0rked and unusable.
    The GNOME desktop is the default one with no modifications that I know of. I tried searching for existing issues but didn't find any.
    I'm running Intel Graphics on:
    $ lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    Any ideas?
    Last edited by yuvadm (2014-03-06 10:03:30)

    While typing the post, I bumped into https://wiki.archlinux.org/index.php/Gn … ncorrectly
    After setting and re-setting my monitor resolution, things seem to fall back into place.
    Looks like I'll use the scaling factor hack for a permanent fix.

  • [solved] Can find sisctrl with pacman

    I'm trying to install sisctrl. I need that tool in order to use my beamer with my laptop. The thing is, I can't find it with pacman. This command gives nothing:
    pacman -Ss sisctrl
    When I started Googeling on this, I found this page. So, it seems to be in Pacman. Or, at least had been in pacman.
    Could anyone help me out to install the on my system?
    Thanks a lot anyway
    Last edited by mariourk (2007-10-13 19:29:23)

    It worked like a charm. I have SiSCtrl up and running.
    I learned another nice feature of ArchLinux today. And I'm really starting to like it too.
    Thanks a lot for the help guys!
    Last edited by mariourk (2007-10-13 15:45:38)

  • Logs *FILLED* with "too many HTTP redirects".

    as far as i can tell... this isn't causing an actual issue with any pages.
    but my Console log is literally filled with :
    *7/29/08 4:03:59 PM servermgrd[40] servermgr_web: Request for status failed: Error Domain=NSURLErrorDomain Code=-1007 UserInfo=0xae42540 "too many HTTP redirects". Admin Web graphs may be inaccurate.*
    literally non-stop all day long. doesn't seem to be related to server load / traffic at all really. timing works out to roughly every 1 minute (very slight drift)... i get 2 or 3 entries. sometimes with maybe a 10 second gap in the "groups".
    example of the "groups" :
    7/29/08 4:19:49 PM
    7/29/08 4:19:58 PM
    7/29/08 4:19:58 PM
    7/29/08 4:20:49 PM
    7/29/08 4:20:58 PM
    7/29/08 4:20:58 PM
    7/29/08 4:21:49 PM
    7/29/08 4:21:59 PM
    7/29/08 4:21:59 PM
    7/29/08 4:22:49 PM
    7/29/08 4:23:00 PM
    7/29/08 4:23:00 PM
    it is getting very annoying obviously.
    seeing the word "redirect" i did the obvious thing and disabled every single redirect i had on the entire site... including all subdomains. no change.
    checked the master httpd.conf and the "sites" .conf files as well for anything else odd or redirect-ish looking. nothing.
    since the timing is so regular... i can't really think what it might be.
    one symptom i DO KNOW OF... is that the Server Admin app will not display the logs while the server is actively running. turn the server OFF ... shows the logs in the Log tab... turn server ON... that tab goes empty.
    most likely related.
    the logs are being written though. since i tail them just fine and see real-time activity.
    i turned OFF all logging... error still shows up.
    so as far as i can tell... not related to actual "Redirects"... not related to my disappearing log tab symptom...
    any ideas?
    IIRC this did NOT happen until migrating to Apache 2.
    thanks.
    zeb./

    cat /etc/resolv.conf
    {quote}
    nameserver 209.165.164.3{quote}
    sudo changeip -checkhostname
    {quote}
    Primary address = 209.165.164.4
    Current HostName = www.arcus.org
    The DNS hostname is not available, please repair DNS and re-run this tool.
    {quote}
    and i get...
    {quote}
    host www.arcus.org
    www.arcus.org has address 209.165.164.4
    {quote}
    and subdomains show up right as well...
    {quote}
    host nps.arcus.org
    nps.arcus.org is an alias for www.arcus.org.
    www.arcus.org has address 209.165.164.4
    {quote}
    i guess i do get make double PTR records back from Network Utility... have www.arcus.org as an A and arcus.org as an A. should the latter maybe be a CNAME like the other (sub-)domains?
    {quote}
    4.164.165.209.in-addr.arpa. 86400 IN PTR www.arcus.org.
    4.164.165.209.in-addr.arpa. 86400 IN PTR arcus.org.
    164.165.209.in-addr.arpa. 86400 IN NS ns1.arcus.org.
    ns1.arcus.org. 7200 IN A 209.165.164.3
    {quote}
    could that be the problem?
    another server is set-up pretty much identical to this one (other than the content and it has a CMS) with the same DNS set-up more or less. (no subdomains. but the double A like this one) and it doesn't have the same error. at all.
    though... it also has functioning web graphs and logs in it's Server Admin.
    thanks.

  • System.log filling with error messages

    After SL update my system.log if filling with error messages.
    Does any process delete the system.log periodically?
    What's causing this error? Getting thousands of them.
    9/30/09 12:08:13 PM [0x0-0x12012].com.nowsoftware.nowxagent[181] at now.swing.NProgressBar.fixAppleAnimationBug(null:-1)

    JHF45 wrote:
    After SL update my system.log if filling with error messages.
    Does any process delete the system.log periodically?
    Yes. There are three automatic jobs that run daily, weekly, and monthly doing this sort of thing. They run in the early hours of the morning if your Mac is awake, or shortly after it wakes up if it was sleeping. In Leopard, if it was powered-off, they won't run; I don't know if it's the same in Snow.

  • [solved] Opera & Sublime Text have graphic errors after system upgrade

    Hi all,
    I hope this was not already answered, but I couldn't find anything in the wiki or the forums.
    Since a pacman -Syu yesterday, Opera (from official repo) and Sublime Text (from the AUR) have some weird graphical glitches:
    Opera: http://i.imgur.com/7XfPK.png
    Sublime Text: http://i.imgur.com/q5guw.png
    (The menus in Sublime Text do work without graphical glitches, I am pretty sure they are drawn with GTK. The rest uses some custom drawing methods AFAIK.)
    Other programs, including 3D-accelerated games, work fine like before.
    I first suspected the catalyst driver, so I went to the wiki and read that it is now in the official repos. So I installed that version. Same effects. So back to the version from Vi0L0s catalyst repo. Did still not work. Then I tried the catalyst-generator package with the same effects.
    Then I looked in pacman.log to see what was upgraded. I then downgraded the kernel and all packages that seemed to have something to do with graphics. Still the same error. Downgraded more packages and finally managed to break X11 :-/.
    I then upgraded everything again so at least most things work.
    I now have this kernel version: 3.6.2-1-ARCH
    I am using systemd.
    My graphics card has a Radeon HD 7750 Chip.
    My pacman.log: http://pastebin.com/RK8cngNq (The upgrade that caused this was at 2012-10-16 14:43)
    Has someone a idea what I can do?
    Thanks,
    Kevin
    EDIT:
    I now run pacman -Syu on my notebook. Both programs work like a charm. The notebook has an Intel GPU. So it must be an issue with the raden driver. I'll try downrading that again...
    Yet another EDIT:
    Didn't work. Here is what I have done to downgrade:
    1. Removed installed catalyst version (installed libgl and lib32-libgl temporarilly so pacman would not remove all 3D-related stuff).
    2. Downloaded all catalyst related packages from the Arch Rollback Machine from 2012-10-08 and installed them using pacman -U
    3. Downgraded X and other related(?) packages:
    # cd /var/cache/pacman/pkg
    # pacman -Uf xorg-server-common-1.12.4-1-x86_64.pkg.tar.xz xorg-server-1.12.4-1-x86_64.pkg.tar.xz xf86-input-evdev-2.7.3-1-x86_64.pkg.tar.xz freeglut-2.8.0-1-x86_64.pkg.tar.xz khrplatform-devel-8.0.4-3-x86_64.pkg.tar.xz mesa-8.0.4-3-x86_64.pkg.tar.xz lib32-mesa-8.0.4-4-x86_64.pkg.tar.xz libglapi-8.0.4-3-x86_64.pkg.tar.xz libgbm-8.0.4-3-x86_64.pkg.tar.xz libegl-8.0.4-3-x86_64.pkg.tar.xz xf86-video-vesa-2.3.2-1-x86_64.pkg.tar.xz
    Had a running X after this, but Opera and Sublime Text are still broken.
    Now upgraded again...
    Last edited by kch42 (2012-10-19 14:39:13)

    To find out, which libraries are involved, I executed opera and subl using strace and then went to a python shell to filter the output for libraries (finding stuff that looks like lib*.so, only catching the middle part) and printing the libraries that both strace logs had in common.
    These libraries are loaded by both programs:
    X11
    Xau
    Xcomposite
    Xcursor
    Xdamage
    Xdmcp
    Xext
    Xfixes
    Xi
    Xinerama
    Xrandr
    Xrender
    atk-1.0
    bz2
    c
    cairo
    canberra
    canberra-gtk
    canberra-gtk-module
    dl
    equinox
    expat
    ffi
    fontconfig
    freetype
    gcc_s
    gdk-x11-2.0
    gdk_pixbuf-2.0
    gio-2.0
    glib-2.0
    gmodule-2.0
    gobject-2.0
    gthread-2.0
    gtk-x11-2.0
    ltdl
    m
    ncursesw
    nss_files
    ogg
    pango-1.0
    pangocairo-1.0
    pangoft2-1.0
    pcre
    pixman-1
    pixmap
    png15
    pthread
    readline
    resolv
    rt
    stdc++
    tdb
    vorbis
    vorbisfile
    xcb
    xcb-render
    xcb-shm
    z
    Some of these libraries have nothing to do with graphics, after filtering these out:
    X11
    Xau
    Xcomposite
    Xcursor
    Xdamage
    Xdmcp
    Xext
    Xfixes
    Xi
    Xinerama
    Xrandr
    Xrender
    atk-1.0
    cairo
    canberra
    canberra-gtk
    canberra-gtk-module
    equinox
    fontconfig
    freetype
    gdk-x11-2.0
    gdk_pixbuf-2.0
    gtk-x11-2.0
    pango-1.0
    pangocairo-1.0
    pangoft2-1.0
    pixman-1
    pixmap
    png15
    xcb
    xcb-render
    xcb-shm
    Both use a lot of X* libraries. But I already downgraded X and the graphics driver and that didn't work...
    I still have no idea, but perhaps someone has?

  • [SOLVED] Dual monitor acting weird on Fluxbox after system upgrade

    Hello.
    I'm using Fluxbox on Xorg. I have two monitors and for more than one year my setup has been this in ~/.xinitrc:
    #!/bin/sh
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    xrandr --output DVI-0 --mode 1920x1080 --pos 0x0 --output DVI-1 --mode 1680x1050 --pos 1920x0
    exec startfluxbox
    Now, I just upgraded my packages (fluxbox and some xorg-* packages were upgraded, like xorg-server, as well as xf86-video-ati) and, although the dual monitor setup works, it seems like each monitor is not recognized individually. My Fluxbox toolbar spans on both monitors horizontally (whereas it used to reside on the left one) and when I maximize a window, it's maximized on both monitors (whereas it used to be maximized on one monitor only, the closest).
    Before reverting the upgrade, anybody knows why this is happening?
    Thanks,
    Phil
    Last edited by eepp (2014-07-07 00:55:04)

    Yup, I can confirm that. It's the fluxbox package.
    I've enabled logging. Here's the full log of 1.3.5-3:
    Log File: /tmp/fluxlog
    Fluxbox version: 1.3.5
    GIT Revision: this_is_tar_ball_build
    Compiled: Jul 4 2014 20:54:40
    Compiler: GCC
    Compiler version: 4.9.0 20140604 (prerelease)
    Defaults:
    menu: /usr/share/fluxbox/menu
    style: /usr/share/fluxbox/styles/bloe
    keys: /usr/share/fluxbox/keys
    init: /usr/share/fluxbox/init
    nls: /usr/share/fluxbox/nls
    Compiled options (- => disabled):
    -BIDI
    -DEBUG
    EWMH
    IMLIB2
    NLS
    REMEMBER
    RENDER
    -SHAPE
    SLIT
    SYSTEMTRAY
    TOOLBAR
    -RANDR
    XFT
    -XINERAMA
    XMB
    XPM
    Notice the -RANDR  and -XINERAMA lines? I bet that is what's causing this.
    For completeness here is the log from 1.3.5-2:
    Log File: /tmp/fluxlog
    Fluxbox version: 1.3.5
    GIT Revision: this_is_tar_ball_build
    Compiled: Apr 4 2013 00:27:22
    Compiler: GCC
    Compiler version: 4.8.0
    Defaults:
    menu: /usr/share/fluxbox/menu
    style: /usr/share/fluxbox/styles/bloe
    keys: /usr/share/fluxbox/keys
    init: /usr/share/fluxbox/init
    nls: /usr/share/fluxbox/nls
    Compiled options (- => disabled):
    BIDI
    -DEBUG
    EWMH
    IMLIB2
    NLS
    REMEMBER
    RENDER
    SHAPE
    SLIT
    SYSTEMTRAY
    TOOLBAR
    RANDR1.2
    XFT
    XINERAMA
    XMB
    XPM
    I need to run now, but I'd say a bug report would indeed be appropriate here. If nobody gets to that earlier I'll see if I can submit one tonight.
    Thanks guys.

  • [SOLVED] Big Memory Leak with Pacman - Xterm - Openbox

    Hi Everyone,
    I Don't know if this is the place to post this, and if not please correct me.
    I've installed Arch Linux in a virtual machine HDD using VirtualBox on Linux Mint. Then I made a simple install with openbox and slim just to make some testes before putting the all thing in my laptop.
    So after installing slim and openbox, i've checked free -m and he noticed me that the system was using 80mb of ram (really cool ^^). Then I start installing some apps just for test.
    I start installing libreoffice like this "sudo pacman -S libreoffice", in a xterm terminal and on another xterm terminal I had the fallowing command running "watch free -m" just to see the ram usage evolution...
    And then, during downloading/instalations, things became wierd... during download the ram usage start to grow up to 120mb and during instalation the ram usage start's growing more and more, to finish at 770mb !
    I doesn't make any sense ! But I don't really know if this is a pacman, openbox or xterm problem :S...
    Can someone give me any information about that ?
    Thanks in advance !
    PS : after a "sudo pacman -Scc" the ram drop at 633mb...
    Luis Da Costa
    Last edited by aliasbody (2011-07-07 18:33:56)

    Leonid.I wrote:
    aliasbody wrote:
    I'm sorry, I'm not making myself clear - my problem isn't the usage of Swap itself. I know that when RAM reaches its maximum, it uses Swap. I know that. And that's not what I'm "complaining" about.
    Problem is - why does updating via pacman uses so much allocated RAM? I think there's a memory leak in here somewhere and that's what I was aiming at - I'm basically asking if it's just me or if this has happened to someone else and if it's really a problem or it has a simple explanation....
    Well, pacman's memory usage depends on a particular package in question. Installing TexLive, for instance, takes a tremendous amount of RAM/swap compared to netcfg. Pacman does not simply copy files, but also executes scripts.
    It is not true that swap is used when the RAM is full. The kernel decides which data in RAM is relevant and the irrelevant data goes to swap, even if you have 300mb of RAM still available. /proc/sys/vm/swappiness controls this logic.
    In your atom netbook you have only 3mb in swap... this can not be the cause of a slowdown.
    Thank you for your answer this make me understand more about the all thing ^^
    I was just scared about a possibile memory leak, I didn't know that pacman.
    Thanks in advance for all, I will marked it as Solved then !

Maybe you are looking for

  • Computer not reading Nano

    I have a second generation nano. I am connecting it to my computer with the USB wire but the computer doesn't seem to detect it. This is a sudden problem as it works fine normally but now it doesnt. It is not a problem with the wire because it works

  • Sony Handycam Problem

    Last week I bought a sony dcr-dvd403 to videotape my daughter's first birthday party, which is now tomorrow!!! It is a mini DVD, not a mini DV. The recording and finalizing go fine. The video plays on the camera. Then, I load the disc into the top lo

  • How to create a special gl indicator

    hi, can any body help me out in creatin speaial gl indicator apart from SAP Standard with regards, jayaprkash

  • Oracle 10.2.0.4.3 - Statspack top 5 timed events show resmgr:become active

    Hello All, In my statspack I am seeing resmgr:decome active 20,009 seconds waiting. We have 8 queue tables and 8 resource group. Is this resource group or queue tables are causing this wait?? Top 5 Timed Events Avg %Total ~~~~~~~~~~~~~~~~~~ wait Call

  • Change FAX number for all vendors and customers in a massive way.

    Hello, I need to change the FAX number for all the vendors and custormers in Q01 so that every form should output through an specific test fax-printer. The problem is that I don't know which field I should change and how can i do it in a massive way.