(SOLVED) Pacman mirrorlist & DB Sync issue.
Hi, I messed with HDD through BSD and my HDD was wiped clean!(grr) anyways I reinstalled Arch with 2009.08 iso image. I've setup connections and enabled repos and updated mirrorlist. I can ping google and browse it through links. System behaves normally. But when I try to install/search ANY package, it says not found in SyncDB.
I've double checked the package names and also tried pacman -Syy, but still no joy
It says core,extra & community are up to date, but stilll wont find kde, apache, alsa-utils etc.. I have not modified pacman.conf in any way. Help!
Last edited by kapz (2009-12-16 20:58:55)
Most likely, your mirror is out of synch. Look into your mirrorlist and determine the first enabled mirror from top of the file, then check against
https://users.archlinux.de/~gerbra/mirrorcheck.html
Pacman will pick the first mirror out of your list as long as it is reachable and if the mirror is out of synch, you won't get any updates.
Similar Messages
-
[solved] pacman mirrorlist "directive 'x' not recognized"
I'm bungling through an install and tried using reflector to get speedier mirrors. Somehow I hosed myself, as when I checked mirrorlist it was blank(!), so I recopied the back-up to /etc/pacman.d/mirrorlist. Now when I run pacman -Syy I get:
error: config file /etc/pacman.d/mirrolist, line 1: directive 'x' in repository section 'core' not recognized.
The a line saying the same holds true for extra and community. Then it tries to sync servers and says: failed to update core (no servers configured for repository), and again for extra and community. I tried to get openssh so I could go in remotely and copy the screen, but "no servers configured for repository."
Can anyone get me out of this can of worms?
Last edited by pottzie (2011-06-17 23:58:40)x#Mirror used during installation
Server = http:/mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
(Which now that i look at I recognize as the server i chose for the installation!)
Then, just the rest of the standard mirror list, and i uncommented the U.S. mirrors. -
Hello there Archlinux folks!
Today, my beloved little home server, running Arch, was a real pain in the ... and I had to realize, the fact: I need the help of ppl who understand this better than I do.
As a related matter, I just bought a Network Media Player today, so I needed to modify my server a bit, like setup XBMC for upnp sharing, and Pacman showed me a "funny error message". With all due respect, I cannot reproduce the original anymore, - but it looked kinda same - since I tried to sync pacman with the repositories, and that somehow altered the current setup. Also tried to enable another repositories, but it did not helped.
Now if I try to install something, like # pacman -S xbmc the following error message is triggered:
[root@hoth estol]# pacman -S xbmc
függőségek feloldása...
belső ütközések keresése...
Célok (79): recode-3.6-6 enca-1.13-1 libmp4v2-1.9.1-1 faac-1.28-2
faad2-2.7-1 freetype2-2.4.4-2 fontconfig-2.8.0-1
fribidi-0.19.2-1 xextproto-7.1.2-1 libxext-1.2.0-1
libice-1.0.7-1 libsm-1.2.0-1 libxt-1.0.9-1 libxmu-1.1.0-1
inputproto-2.0.1-1 libxi-1.4.1-1 libdrm-2.4.23-2
xf86vidmodeproto-2.3.1-1 libxxf86vm-1.1.1-1 fixesproto-4.1.2-1
libxfixes-4.0.5-1 damageproto-1.2.1-1 libxdamage-1.1.3-1
libgl-7.10.0.git20110215-1 dri2proto-2.3-1 glproto-1.4.12-1
mesa-7.10.0.git20110215-1 glew-1.5.8-1 freeglut-2.6.0-1
jasper-1.900.1-6 libcddb-1.3.2-2 libcdio-0.82-1 libmad-0.15.1b-4
libmms-0.6-1 libmpeg2-0.5.1-1 libvorbis-1.3.2-1
alsa-lib-1.0.23-2 libsndfile-1.0.23-1 libsamplerate-0.1.7-1
xineramaproto-1.2.1-1 libxinerama-1.1.1-1 renderproto-0.11.1-1
libxrender-0.9.6-1 randrproto-1.3.2-1 libxrandr-1.3.1-1
recordproto-1.14.1-1 libxtst-1.2.0-1 sdl-1.2.14-6
sdl_image-1.2.10-2 libmikmod-3.1.12-3 smpeg-0.4.4-5
sdl_mixer-1.2.11-2 wavpack-4.60.1-1 mesa-demos-8.0.1-1
xf86dgaproto-2.1-1 libxxf86dga-1.1.2-1 compositeproto-0.4.2-1
libxcomposite-0.4.3-1 dmxproto-2.3.1-1 libdmx-1.1.1-1
xorg-xdpyinfo-1.2.0-1 xorg-xdriinfo-1.0.4-1 xorg-xev-1.1.0-1
xorg-xlsatoms-1.1.0-1 xcb-util-0.3.6-1 xorg-xlsclients-1.1.1-1
xorg-xprop-1.2.0-1 videoproto-2.3.1-1 libxv-1.0.6-1
xorg-xvinfo-1.1.1-1 xorg-xwininfo-1.1.1-1 xorg-utils-7.6-6
libmicrohttpd-0.9.7-1 libssh-0.4.8-1 libva-1.0.8-1
libmodplug-0.8.8.1-1 rtmpdump-2.3-3 lsb-release-1.4-10
xbmc-10.0-4
Teljes letöltendő méret: 39,00 MB
Teljes telepített méret: 133,01 MB
Kezdődhet a telepítés? [I/n] I
:: Csomagok letöltése a(z) extra repóból...
hiba: nem sikerült a(z) 'recode-3.6-6-i686.pkg.tar.xz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
hiba: nem sikerült a(z) 'enca-1.13-1-i686.pkg.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
^Chiba: nem sikerült a(z) 'faad2-2.7-1-i686.pkg.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
Interrupt signal received
Sorry about the language, it is localized for Hungarian.
hint:
hiba is for error
letölteni is for download
Teljes is for total
Telepít(telepítés, telepített) is for install(installing, installed)
Then I interrupt it, since it takes a long time.
The most confusing part is, that even a simple management command - like # pacman -Syu - is also triggering an error:
[root@hoth estol]# pacman -Syu
:: A csomagadatbázisok szinkronizálása...
hiba: nem sikerült a(z) 'core.db.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
hiba: nem sikerült a(z) core frissítése (No address record)
^Chiba: nem sikerült a(z) 'extra.db.tar.gz' fájlt letölteni a ftp.mfa.kfki.hu helyről : No address record
Interrupt signal received
Some technical details about the machine:
[estol@hoth ~]$ uname -a
Linux hoth 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686 Pentium III (Coppermine) GenuineIntel GNU/Linux
[estol@hoth ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 747.685
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pse36 mmx fxsr sse up
bogomips : 1495.67
clflush size : 32
cache_alignment : 32
address sizes : 36 bits physical, 32 bits virtual
power management:
Also the recent Pacman log,
[2011-02-21 00:51] Running 'pacman -Syu'
[2011-02-21 00:51] synchronizing package lists
[2011-02-21 00:51] starting full system upgrade
[2011-02-21 00:52] upgraded tzdata (2010o-1 -> 2011b-1)
[2011-02-21 00:52] Generating locales...
[2011-02-21 00:52] en_US.UTF-8... done
[2011-02-21 00:52] en_US.ISO-8859-1... done
[2011-02-21 00:52] hu_HU.UTF-8... done
[2011-02-21 00:52] hu_HU.ISO-8859-2... done
[2011-02-21 00:52] Generation complete.
[2011-02-21 00:53] upgraded glibc (2.13-1 -> 2.13-4)
[2011-02-21 00:53] warning: /etc/bash.bashrc installed as /etc/bash.bashrc.pacnew
[2011-02-21 00:53] upgraded bash (4.1.009-3 -> 4.1.009-4)
[2011-02-21 00:53] upgraded binutils (2.21-3 -> 2.21-4)
[2011-02-21 00:53] upgraded curl (7.21.3-1 -> 7.21.4-2)
[2011-02-21 00:53] upgraded db (5.1.19-3 -> 5.1.25-1)
[2011-02-21 00:53] upgraded udev (165-1 -> 166-2)
[2011-02-21 00:53] upgraded device-mapper (2.02.82-2 -> 2.02.84-1)
[2011-02-21 00:53] >>> Updating module dependencies. Please wait ...
[2011-02-21 00:53] >>> MKINITCPIO SETUP
[2011-02-21 00:53] >>> ----------------
[2011-02-21 00:53] >>> If you use LVM2, Encrypted root or software RAID,
[2011-02-21 00:53] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-02-21 00:53] >>> More information about mkinitcpio setup can be found here:
[2011-02-21 00:53] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-02-21 00:53]
[2011-02-21 00:53] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-02-21 00:53] ==> Building image "default"
[2011-02-21 00:53] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-02-21 00:53] :: Begin build
[2011-02-21 00:53] :: Parsing hook [base]
[2011-02-21 00:53] :: Parsing hook [udev]
[2011-02-21 00:53] :: Parsing hook [autodetect]
[2011-02-21 00:53] :: Parsing hook [pata]
[2011-02-21 00:54] :: Parsing hook [scsi]
[2011-02-21 00:54] :: Parsing hook [sata]
[2011-02-21 00:54] :: Parsing hook [filesystems]
[2011-02-21 00:54] :: Generating module dependencies
[2011-02-21 00:54] :: Generating image '/boot/kernel26.img'...SUCCESS
[2011-02-21 00:54] ==> SUCCESS
[2011-02-21 00:54] ==> Building image "fallback"
[2011-02-21 00:54] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-02-21 00:54] :: Begin build
[2011-02-21 00:54] :: Parsing hook [base]
[2011-02-21 00:54] :: Parsing hook [udev]
[2011-02-21 00:54] :: Parsing hook [pata]
[2011-02-21 00:54] :: Parsing hook [scsi]
[2011-02-21 00:56] :: Parsing hook [sata]
[2011-02-21 00:56] :: Parsing hook [filesystems]
[2011-02-21 00:57] :: Generating module dependencies
[2011-02-21 00:57] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2011-02-21 00:57] ==> SUCCESS
[2011-02-21 00:57] upgraded kernel26 (2.6.37-5 -> 2.6.37.1-1)
[2011-02-21 00:57] upgraded libldap (2.4.23-1 -> 2.4.24-1)
[2011-02-21 00:57] upgraded lvm2 (2.02.82-2 -> 2.02.84-1)
[2011-02-21 00:57] upgraded mc (4.7.4-1 -> 4.7.5.1-1)
[2011-02-21 00:57] warning: /etc/ntp.conf installed as /etc/ntp.conf.pacnew
[2011-02-21 00:57] warning: /etc/conf.d/ntp-client.conf installed as /etc/conf.d/ntp-client.conf.pacnew
[2011-02-21 00:57] upgraded ntp (4.2.6.p2-1 -> 4.2.6.p3-1)
[2011-02-21 00:57] upgraded ppp (2.4.5-1 -> 2.4.5-2)
[2011-02-21 00:57] upgraded syslog-ng (3.2.1-1 -> 3.2.2-1)
[2011-02-21 00:57] upgraded vi (050325-3 -> 050325-4)
[2011-02-21 00:57] upgraded wget (1.12-3 -> 1.12-4)
[2011-02-21 19:57] Running 'pacman -U'
[2011-03-04 19:42] Running 'pacman -S ushare'
[2011-03-04 19:44] Running 'pacman -S ushare'
[2011-03-04 19:44] Running 'pacman -S ushare'
[2011-03-04 19:46] Running 'pacman -S ushare'
[2011-03-04 19:46] Running 'pacman -S mediatomb'
[2011-03-04 19:47] Running 'pacman -S mediatomb'
[2011-03-04 19:49] Running 'pacman -S ushare'
[2011-03-04 19:57] Running 'pacman -S ushare'
[2011-03-04 20:00] Running 'pacman -S ushare'
[2011-03-04 20:01] Running 'pacman -S ushare'
[2011-03-04 20:08] Running 'pacman -S ushare'
[2011-03-04 20:14] Running 'pacman -S ushare'
[2011-03-04 20:16] Running 'pacman -S ushare'
[2011-03-04 20:21] Running 'pacman -S ushare'
[2011-03-04 21:05] Running 'pacman -S ushare'
[2011-03-04 21:12] Running 'pacman -S ushare'
[2011-03-04 21:13] Running 'pacman -S mediatomb'
[2011-03-04 21:17] Running 'pacman -S ushare'
[2011-03-04 22:51] Running 'pacman -S ushare'
[2011-03-05 01:42] Running 'pacman -Sy xbmc'
[2011-03-05 01:42] synchronizing package lists
[2011-03-05 01:43] Running 'pacman -Syu'
[2011-03-05 01:43] synchronizing package lists
[2011-03-05 01:49] Running 'pacman -Syu'
[2011-03-05 01:49] synchronizing package lists
[2011-03-05 01:53] Running 'pacman -U'
[2011-03-05 01:53] Running 'pacman -U'
[2011-03-05 02:02] Running 'pacman -Syu'
[2011-03-05 02:02] synchronizing package lists
[2011-03-05 02:09] Running 'pacman -S xmbc'
[2011-03-05 02:11] Running 'pacman -S xmbc'
[2011-03-05 02:11] Running 'pacman -S xmbc'
[2011-03-05 02:12] Running 'pacman -Syu'
[2011-03-05 02:12] synchronizing package lists
[2011-03-05 02:17] Running 'pacman -S xbmc'
The first entry is the last known use of Pacman, that was successful.
All help would be highly appreciated.
estol
Last edited by estol (2011-03-05 03:51:48)@skunktrader: yes, I tried, no it did not helped.
@karol: mea culpa, mea maxima culpa, a friend of mine hooked me up with this distro, and set it to be hungarian as default, now I know how to change it - to be honest, this language annoys the crap out of me.
@TigTex: yes, the host is alive, I can even browse the contents.
Thanks for all the help, as it turned out, the problem was hardware related. Time to put her down.
Last edited by estol (2011-03-05 03:52:39) -
[SOLVED] Pacman and ABS sync give different results
I have been having a few issues with the NZ mirror, however they have been sorted. I have -Syy'ed a couple of times and get back:
:: Starting full system upgrade...
local database is up to date
Which I know isn't the case as I visited the mirror via a browser and I can see Thunderbird 3 sitting there (taunting me)...
So I did a
# abs
and now in /var/abs/extra/ I have thunderbird 3 sitting there. How is that possible?
Last edited by jasonwryan (2009-12-18 21:41:19)jasonwryan wrote:
How would I find that?
/edit
/var/log/pacman.log reports
[2009-12-18 16:01] synchronizing package lists
You open up the address in a browser and see all the files on the mirror and the dates they changed, there should be a file called extra.db.tar.gz which is the file listing what's on the mirror. You can also check mirror status on this page https://users.archlinux.de/~gerbra/mirrorcheck.html -
Any idea why? I got my rt73 wireless working, and was able to go on the internet with links, but synchronizing with pacman is stuck at 'Synchronizing Package Databases'.
Is it because pacman is too old and I need to upgrade it first or what?
Last edited by Firepower (2009-12-17 04:36:40)Ok. Just solved it. Had to upgrade pacman. thanks.
-
[Solved] pacman 4.1 has issues with resolving file-conflicts
Today i wanted to upgrade protobuf-python which will be replaced by python2-protobuf, but pacman ignores the fact, that protobuf-python will be removed:
# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
community-testing is up to date
testing is up to date
:: Starting full system upgrade...
warning: pacman: local (4.1.0-1) is newer than core (4.0.3-7)
:: Replace protobuf-python with community/python2-protobuf? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Packages (20): binutils-2.23.2-1 gcc-4.8.0-1 gcc-libs-4.8.0-1 glibc-2.17-4 libltdl-2.4.2-8 libpulse-3.0-3 libtool-2.4.2-8 libxkbcommon-0.3.0-1 linux-api-headers-3.8.4-1 protobuf-python-2.5.0-1
protobuf-python-2.5.0-1 [removal] pulseaudio-3.0-3 python2-dirspec-4.2.0-1 python2-oauthlib-0.4.0-1 python2-protobuf-2.5.0-2 python2-ubuntuone-storageprotocol-4.2.0-1
ubuntu-sso-client-4.2.0-1 ubuntuone-client-4.2.0-1 ubuntuone-client-gnome-4.2.0-1 ubuntuone-control-panel-4.2.0-1
Total Installed Size: 178.39 MiB
Net Upgrade Size: 6.89 MiB
:: Proceed with installation? [Y/n]
(19/19) checking keys in keyring [-----------------------------------------------------------------------------] 100%
(19/19) checking package integrity [-----------------------------------------------------------------------------] 100%
(19/19) loading package files [-----------------------------------------------------------------------------] 100%
(19/19) checking for file conflicts [-----------------------------------------------------------------------------] 100%
error: failed to commit transaction (conflicting files)
/usr/lib/python2.7/site-packages/google/protobuf/__init__.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/__init__.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/__init__.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/__init__.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/plugin_pb2.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/compiler/plugin_pb2.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_database.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_database.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pb2.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pb2.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pool.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/descriptor_pool.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/__init__.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/__init__.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/api_implementation.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/api_implementation.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/containers.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/containers.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/cpp_message.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/cpp_message.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/decoder.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/decoder.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/encoder.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/encoder.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/enum_type_wrapper.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/enum_type_wrapper.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/message_listener.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/message_listener.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/python_message.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/python_message.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/type_checkers.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/type_checkers.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/wire_format.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/internal/wire_format.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message_factory.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/message_factory.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/reflection.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/reflection.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service_reflection.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/service_reflection.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/text_format.py exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/google/protobuf/text_format.pyc exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7-nspkg.pth exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/PKG-INFO exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/SOURCES.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/dependency_links.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/namespace_packages.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/requires.txt exists in both 'python2-protobuf' and 'protobuf-python'
/usr/lib/python2.7/site-packages/protobuf-2.5.0-py2.7.egg-info/top_level.txt exists in both 'python2-protobuf' and 'protobuf-python'
Errors occurred, no packages were upgraded.
Anyone with the same problem here or is it just me?
Btw: If it's a bug: Please fill a bug report, i don't want to register just for 1 bug...
Last edited by D4ve (2013-04-02 11:22:49)drcouzelis wrote:
If you want to receive information about the progress made on the bug and contribute to getting it fixed then, yes, you need to register.
Otherwise, just use bugmenot.com.
Too late, i already registered.
drcouzelis wrote:Lastly, don't be cheeky.
Huh? In the whole discussion i wasn't once cheeky
drcouzelis wrote:
Otherwise, Allan will install a special surprise just for you in pacman.
if (strcmp(username, "D4ve") == 0) {
set_dependency_for_all_packages("akonadi");
That would be awesome. Three lines of code just for me
(Just for information: I hate gnome-shell for displaying my name in the top right corner so i switched my username to "<*)))><") -
[solved] Pacman Mirrorlist Generator misbehaving?
I picked Germany from http://www.archlinux.org/mirrorlist/ and got some leaseweb.net mirrors from US and the Netherlands too.
## Arch Linux repository mirrorlist
## Generated on 2011-11-01
## Germany
#Server = http://archlinux.limun.org/$repo/os/$arch
#Server = ftp://artfiles.org/archlinux.org/$repo/os/$arch
#Server = http://artfiles.org/archlinux.org/$repo/os/$arch
#Server = http://mirror.devnu11.net/archlinux/$repo/os/$arch
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
#Server = http://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
#Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
#Server = http://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
#Server = ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
#Server = http://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
#Server = ftp://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://mirrors.n-ix.net/archlinux/$repo/os/$arch
#Server = http://mirrors.n-ix.net/archlinux/$repo/os/$arch
#Server = ftp://mirror.selfnet.de/archlinux/$repo/os/$arch
#Server = http://mirror.selfnet.de/archlinux/$repo/os/$arch
#Server = ftp://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
#Server = http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://arch.mirrors.tuxdroid.org/$repo/os/$arch
#Server = http://arch.mirrors.tuxdroid.org/$repo/os/$arch
#Server = ftp://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
## Netherlands
#Server = ftp://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
## United States
#Server = ftp://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
Why?
Picking other countries works as expected but I haven't tested them all.
Last edited by karol (2011-11-03 21:47:21)bernarcher wrote:Checking the "Use mirror status" did produce Germany only mirrors, however.
Nope
## Arch Linux repository mirrorlist
## Sorted by mirror score from mirror status page
## Generated on 2011-11-01
## Score: 1.1, Germany
#Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
## Score: 1.2, Germany
#Server = http://archlinux.limun.org/$repo/os/$arch
## Score: 1.2, Germany
#Server = http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
## Score: 1.4, Germany
#Server = http://mirror.devnu11.net/archlinux/$repo/os/$arch
## Score: 1.5, Germany
#Server = http://arch.mirrors.tuxdroid.org/$repo/os/$arch
## Score: 1.7, Germany
#Server = http://mirror.selfnet.de/archlinux/$repo/os/$arch
## Score: 2.1, Germany
#Server = ftp://arch.mirrors.tuxdroid.org/$repo/os/$arch
## Score: 2.3, Germany
#Server = http://mirrors.n-ix.net/archlinux/$repo/os/$arch
## Score: 2.4, Germany
#Server = ftp://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
## Score: 2.4, Germany
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
## Score: 2.4, Germany
#Server = http://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
## Score: 2.6, Germany
#Server = ftp://mirror.selfnet.de/archlinux/$repo/os/$arch
## Score: 2.7, Germany
#Server = ftp://mirrors.n-ix.net/archlinux/$repo/os/$arch
## Score: 3.4, Germany
#Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
## Score: 3.9, United States
#Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
## Score: 4.0, Germany
#Server = http://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
## Score: 4.1, United States
#Server = ftp://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
## Score: 4.4, Germany
#Server = http://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
## Score: 4.5, Germany
#Server = http://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
## Score: 4.5, Netherlands
#Server = http://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
## Score: 5.3, Germany
#Server = ftp://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
## Score: 5.5, Germany
#Server = ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
## Score: 5.8, Germany
#Server = ftp://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
## Score: 6.3, Netherlands
#Server = ftp://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
## Score: 13.1, Germany
#Server = http://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
## Score: 13.8, Germany
#Server = http://artfiles.org/archlinux.org/$repo/os/$arch
## Score: 14.3, Germany
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
## Score: 15.4, Germany
#Server = ftp://artfiles.org/archlinux.org/$repo/os/$arch
## Score: 28.8, Germany
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
## Score: 30.1, Germany
#Server = ftp://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch -
TIMECODES are important for audio and video sync issues
Hello, just wanted to pass on what I learned so that others can avoid the trouble that I've had to go through. Perhaps this may help someone who is stuck on the launch pad. :)
BOTTOM LINE: Info for the beginner. Audio and video not in sync in Premiere Pro CS3 V3.2.0
PROBLEM: Capture works great it seems. When I go to the folder that contains the captured file and view in Windows Media Player audio and video are in sync. BUT when viewing the video asset in the source and program monitors, the audio and video are not in sync.
SOLUTION:
Before capturing a tape make certain the following is checked:
(1) Edit->Preferences->Capture->Use device control timecode
(2) Edit->Preferences->Device Control->Options->Timecode Format
(3) Project->Project Settings->General->Video->Display format
As for the devices timecode choose something other than Auto Detect. Then match the project timecode with what was chosen during capture. The projects display format could of course be set to frames.
I searched everywhere for audio and video sync issues in google, adobe forums, F1 help, and hv20.com and everyone was talking about:
(1) Presets: 1080p30 vs. 1080i30 (60i).
(2) brakes in the tape where timecode for the audio and video get misaligned during capture.
But choosing the correct hardware settings and timecodes to solve audio and video sync issues never popped up.
MY HARDWARE: Canon HV30, HDV>Audio and video not in sync in Premiere Pro CS3 V3.2.0
Must be an HDV only issue because my synch is always perfect. -
IPhoto 9.4.1 does not solve all sync issues
The 9.4.1 update does not solve all the sync issues.
It may have fixed the duplicate Events that you can see in iTunes when syncing to an iDevice, but it has not resolved the duplicate Faces.
I still have many duplicate Faces showing, even though in iPhoto the Faces are only there once.......Try the following:
1 - open the library package with the Finder as follows:
2 - Find the AlbumData.xml file and move it to the Desktop.
3 - close the package and launch iPhoto.
See if the above will get rid of the bogus events.
OT -
How to solve the syncing issues of apps downloaded? They are stuck on "loading" and "waiting"
Syncing issues from iTunes to iPad. Apps are showing as "loading" and "waiting"
I had the same issue and tried several options like rebooting, resyncing, deleting and reinstalling apps, restarting the network connection but none of them worked. Eventually I opened iTunes on my iPhone (not on Mac) to find that it had two pending downloads that was stopping the rest of the apps from loading fully. You need to cancel them by swiping left to right over the listed apps and select cancel/delete. It worked for me. Good luck!
-
[solved] pacman cannot retrieve core.db
I get the following errors when I try updating via pacman:
[eric@blackmesa sync]$ sudo pacman -Syyu
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirrors.rutgers.edu : Connection time-out
error: failed retrieving file 'core.db' from mirror.rit.edu : Connection time-out
error: failed retrieving file 'core.db' from cake.lib.fit.edu : Connection time-out
error: failed retrieving file 'core.db' from mirror.us.leaseweb.net : Connection time-out
error: failed to update core (download library error)
extra 1183.5 KiB 122K/s 00:10 [######################] 100%
community 1035.7 KiB 122K/s 00:08 [######################] 100%
error: failed retrieving file 'multilib.db' from mirrors.rutgers.edu : Connection time-out
error: failed retrieving file 'multilib.db' from mirror.rit.edu : Connection time-out
error: failed retrieving file 'multilib.db' from cake.lib.fit.edu : Connection time-out
error: failed retrieving file 'multilib.db' from mirror.us.leaseweb.net : Connection time-out
error: failed to update multilib (download library error)
:: Starting full system upgrade...
there is nothing to do
[eric@blackmesa sync]$
Sometimes I cannot get multilib either.
I am able to curl the first mirror:
[eric@blackmesa sync]$ curl -O http://mirrors.rutgers.edu/archlinux/core/os/x86_64/core.db
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:15 --:--:-- 0Warning: Failed to create the file core.db: Permission denied
1 106k 1 1117 0 0 73 0 0:24:51 0:00:15 0:24:36 16671
curl: (23) Failed writing body (0 != 1117)
This is my pacman.conf:
[eric@blackmesa etc]$ cat pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# PGP signature checking
# NOTE: None of this will work without running `pacman-key --init` first.
# The compiled in default is equivalent to the following line. This requires
# you to locally sign and trust packager keys using `pacman-key` for them to be
# considered valid.
#SigLevel = Optional TrustedOnly
# If you wish to check signatures but avoid local sign and trust issues, use
# the following line. This will treat any key imported into pacman's keyring as
# trusted.
#SigLevel = Optional TrustAll
# For now, off by default unless you read the above.
SigLevel = Optional TrustedOnly
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[multilib]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
[eric@blackmesa etc]$
This is my mirrorlist file:
[eric@blackmesa pacman.d]$ cat mirrorlist
## Arch Linux repository mirrorlist
## Generated on 2012-01-26
## Any
#Server = ftp://mirrors.kernel.org/archlinux/$repo/os/$arch
#Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
## Australia
#Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch
#Server = http://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch
#Server = ftp://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch
#Server = http://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.internode.on.net/pub/archlinux/$repo/os/$arch
#Server = http://mirror.internode.on.net/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.optus.net/archlinux/$repo/os/$arch
#Server = http://mirror.optus.net/archlinux/$repo/os/$arch
## Belarus
#Server = ftp://ftp.byfly.by/pub/archlinux/$repo/os/$arch
#Server = http://ftp.byfly.by/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.datacenter.by/pub/archlinux/$repo/os/$arch
#Server = http://mirror.datacenter.by/pub/archlinux/$repo/os/$arch
## Belgium
#Server = ftp://archlinux.mirror.kangaroot.net/pub/archlinux/$repo/os/$arch
#Server = http://archlinux.mirror.kangaroot.net/$repo/os/$arch
## Brazil
#Server = ftp://ftp.bitwave.com.br/archlinux/$repo/os/$arch
#Server = http://www.bitwave.com.br/downloads/archlinux/$repo/os/$arch
#Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/$arch
#Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
#Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/$arch
#Server = http://www.las.ic.unicamp.br/pub/archlinux/$repo/os/$arch
#Server = ftp://www2.itti.ifce.edu.br/archlinux/$repo/os/$arch
#Server = http://www2.itti.ifce.edu.br/archlinux/$repo/os/$arch
## Bulgaria
#Server = ftp://archlinux.igor.onlinedirect.bg/linux/archlinux/$repo/os/$arch
#Server = http://archlinux.igor.onlinedirect.bg/$repo/os/$arch
## Canada
#Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch
#Server = http://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch
#Server = ftp://mirror.its.dal.ca/archlinux/$repo/os/$arch
#Server = http://mirror.its.dal.ca/archlinux/$repo/os/$arch
## Chile
#Server = ftp://mirror.archlinux.cl/$repo/os/$arch
#Server = ftp://mirror.netglobalis.net/archlinux/$repo/os/$arch
#Server = http://mirror.netglobalis.net/archlinux/$repo/os/$arch
## China
#Server = http://mirrors.163.com/archlinux/$repo/os/$arch
#Server = http://mirror.bjtu.edu.cn/archlinux/$repo/os/$arch
#Server = http://mirror6.bjtu.edu.cn/archlinux/$repo/os/$arch
#Server = ftp://mirror.lzu.edu.cn/archlinux/$repo/os/$arch
#Server = http://mirror.lzu.edu.cn/archlinux/$repo/os/$arch
#Server = ftp://mirrors.stuhome.net/archlinux/$repo/os/$arch
#Server = http://mirrors.stuhome.net/archlinux/$repo/os/$arch
## Colombia
#Server = http://www.laqee.unal.edu.co/archlinux/$repo/os/$arch
## Czech Republic
#Server = ftp://archlinux.mirror.dkm.cz/pub/archlinux/$repo/os/$arch
#Server = http://archlinux.mirror.dkm.cz/pub/archlinux/$repo/os/$arch
#Server = http://mirror.vpsfree.cz/archlinux/$repo/os/$arch
## Denmark
#Server = ftp://mirrors.dotsrc.org/archlinux/$repo/os/$arch
#Server = http://mirrors.dotsrc.org/archlinux/$repo/os/$arch
#Server = ftp://ftp.klid.dk/archlinux/$repo/os/$arch
## Estonia
#Server = ftp://ftp.eenet.ee/pub/archlinux/$repo/os/$arch
#Server = http://ftp.eenet.ee/pub/archlinux/$repo/os/$arch
## Finland
#Server = ftp://mirror.academica.fi/archlinux/$repo/os/$arch
#Server = http://mirror.academica.fi/archlinux/$repo/os/$arch
#Server = ftp://mirror.archlinux.fi/archlinux/$repo/os/$arch
#Server = http://mirror.archlinux.fi/archlinux/$repo/os/$arch
## France
#Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch
#Server = http://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch
#Server = http://mir.archlinux.fr/$repo/os/$arch
#Server = ftp://mir1.archlinux.fr/archlinux/$repo/os/$arch
#Server = http://mir1.archlinux.fr/archlinux/$repo/os/$arch
#Server = http://miroir.ezvan.fr/archlinux/$repo/os/$arch
#Server = ftp://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch
#Server = http://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch
#Server = http://archlinux.polymorf.fr/$repo/os/$arch
## Germany
#Server = http://archlinux.limun.org/$repo/os/$arch
#Server = ftp://artfiles.org/archlinux.org/$repo/os/$arch
#Server = http://artfiles.org/archlinux.org/$repo/os/$arch
#Server = http://mirror.devnu11.net/archlinux/$repo/os/$arch
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
#Server = http://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
#Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
#Server = http://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
#Server = ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
#Server = http://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
#Server = ftp://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://mirrors.n-ix.net/archlinux/$repo/os/$arch
#Server = http://mirrors.n-ix.net/archlinux/$repo/os/$arch
#Server = ftp://mirror.selfnet.de/archlinux/$repo/os/$arch
#Server = http://mirror.selfnet.de/archlinux/$repo/os/$arch
#Server = ftp://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
#Server = http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://arch.mirrors.tuxdroid.org/$repo/os/$arch
#Server = http://arch.mirrors.tuxdroid.org/$repo/os/$arch
#Server = ftp://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
## Great Britain
#Server = ftp://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch
#Server = http://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.bytemark.co.uk/archlinux/$repo/os/$arch
#Server = http://mirror.bytemark.co.uk/archlinux/$repo/os/$arch
#Server = ftp://mirror.cinosure.com/archlinux/$repo/os/$arch
#Server = http://mirror.cinosure.com/archlinux/$repo/os/$arch
#Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/$arch
#Server = http://archlinux.mirrors.uk2.net/$repo/os/$arch
## Greece
#Server = ftp://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch
#Server = http://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch
#Server = http://foss.aueb.gr/mirrors/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.otenet.gr/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.otenet.gr/linux/archlinux/$repo/os/$arch
## Hungary
#Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
## India
#Server = ftp://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch
#Server = http://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch
## Indonesia
#Server = http://repo.ukdw.ac.id/archlinux/$repo/os/$arch
## Ireland
#Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch
#Server = http://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch
## Israel
#Server = ftp://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch
#Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch
## Italy
#Server = http://mirrors.prometeus.net/archlinux/$repo/os/$arch
## Japan
#Server = http://ftp.tsukuba.wide.ad.jp/Linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch
#Server = http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch
#Server = ftp://ftp.yz.yamagata-u.ac.jp/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.yz.yamagata-u.ac.jp/pub/linux/archlinux/$repo/os/$arch
## Kazakhstan
#Server = ftp://archlinux.kz/$repo/os/$arch
#Server = http://archlinux.kz/$repo/os/$arch
#Server = ftp://mirror.neolabs.kz/archlinux/$repo/os/$arch
#Server = http://mirror.neolabs.kz/archlinux/$repo/os/$arch
## Korea
#Server = ftp://mirror.yongbok.net/archlinux/$repo/os/$arch
#Server = http://mirror.yongbok.net/archlinux/$repo/os/$arch
## Latvia
#Server = http://archlinux.goodsoft.lv/$repo/os/$arch
## Luxembourg
#Server = ftp://archlinux.mirror.root.lu/archlinux/$repo/os/$arch
#Server = http://archlinux.mirror.root.lu/$repo/os/$arch
## Macedonia
#Server = http://arch.linux.net.mk/archlinux/$repo/os/$arch
## Moldova
#Server = ftp://mirror.ihost.md/archlinux/$repo/os/$arch
#Server = http://mirror.ihost.md/archlinux/$repo/os/$arch
## Netherlands
#Server = ftp://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch
#Server = http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch
## New Caledonia
#Server = ftp://archlinux.nautile.nc/archlinux/$repo/os/$arch
#Server = http://archlinux.nautile.nc/archlinux/$repo/os/$arch
## Norway
#Server = ftp://arch.ping.uio.no/$repo/os/$arch
#Server = http://arch.ping.uio.no/$repo/os/$arch
#Server = ftp://mirror.archlinux.no/$repo/os/$arch
#Server = http://mirror.archlinux.no/$repo/os/$arch
#Server = ftp://mirror.pvv.ntnu.no/pub/archlinux/$repo/os/$arch
## Poland
#Server = ftp://mirror.chmuri.net/archmirror/$repo/os/$arch
#Server = http://mirror.chmuri.net/archmirror/$repo/os/$arch
#Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
#Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
## Portugal
#Server = ftp://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch
#Server = http://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch
## Romania
#Server = ftp://mirrors.adnettelecom.ro/archlinux/$repo/os/$arch
#Server = http://mirrors.adnettelecom.ro/archlinux/$repo/os/$arch
#Server = ftp://mirror.archlinux.ro/archlinux/$repo/os/$arch
#Server = http://mirror.archlinux.ro/archlinux/$repo/os/$arch
#Server = ftp://ftp.roedu.net/mirrors/archlinux.org/$repo/os/$arch
#Server = http://ftp.roedu.net/mirrors/archlinux.org/$repo/os/$arch
## Russia
#Server = ftp://mirror.yandex.ru/archlinux/$repo/os/$arch
#Server = http://mirror.yandex.ru/archlinux/$repo/os/$arch
## Singapore
#Server = ftp://ftp.oss.eznetsols.org/linux/archlinux/$repo/os/$arch
## Slovakia
#Server = ftp://mirror.lnx.sk/pub/linux/archlinux/$repo/os/$arch
#Server = http://mirror.lnx.sk/pub/linux/archlinux/$repo/os/$arch
## South Korea
#Server = ftp://ftp.kaist.ac.kr/ArchLinux/$repo/os/$arch
#Server = http://ftp.kaist.ac.kr/ArchLinux/$repo/os/$arch
## Spain
#Server = ftp://ftp.rediris.es/mirror/archlinux/$repo/os/$arch
#Server = http://sunsite.rediris.es/mirror/archlinux/$repo/os/$arch
## Sweden
#Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch
#Server = http://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch
#Server = http://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch
#Server = ftp://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch
#Server = http://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch
## Switzerland
#Server = ftp://archlinux.puzzle.ch/$repo/os/$arch
#Server = http://archlinux.puzzle.ch/$repo/os/$arch
## Taiwan
#Server = ftp://linux.cs.nctu.edu.tw/archlinux/$repo/os/$arch
#Server = http://linux.cs.nctu.edu.tw/archlinux/$repo/os/$arch
#Server = ftp://shadow.ind.ntou.edu.tw/archlinux/$repo/os/$arch
#Server = http://shadow.ind.ntou.edu.tw/archlinux/$repo/os/$arch
#Server = ftp://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch
#Server = http://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch
## Turkey
#Server = ftp://ftp.linux.org.tr/archlinux/$repo/os/$arch
#Server = http://ftp.linux.org.tr/archlinux/$repo/os/$arch
## Ukraine
#Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch
#Server = http://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch
#Server = ftp://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch
#Server = http://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch
## United States
Server = http://mirrors.rutgers.edu/archlinux/$repo/os/$arch
Server = http://mirror.rit.edu/archlinux/$repo/os/$arch
Server = http://cake.lib.fit.edu/archlinux/$repo/os/$arch
Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://archlinux.supsec.org/pub/linux/arch/$repo/os/$arch
#Server = http://archlinux.supsec.org/$repo/os/$arch
#Server = ftp://cake.lib.fit.edu/archlinux/$repo/os/$arch
#Server = http://mirrors.cat.pdx.edu/archlinux/$repo/os/$arch
#Server = ftp://cosmos.cites.illinois.edu/pub/archlinux/$repo/os/$arch
#Server = http://cosmos.cites.illinois.edu/pub/archlinux/$repo/os/$arch
#Server = http://mirror.ece.vt.edu/archlinux/$repo/os/$arch
#Server = ftp://ftp.archlinux.org/$repo/os/$arch
#Server = ftp://ftp.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch
#Server = http://www.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch
#Server = http://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch
#Server = http://mirrors.us.kernel.org/archlinux/$repo/os/$arch
#Server = ftp://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/$arch
#Server = http://mirrors.gigenet.com/archlinux/$repo/os/$arch
#Server = http://mirrors.liquidweb.com/archlinux/$repo/os/$arch
#Server = http://mirror.mocker.org/archlinux/$repo/os/$arch
#Server = ftp://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
#Server = http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.rit.edu/archlinux/$repo/os/$arch
#Server = http://schlunix.org/archlinux/$repo/os/$arch
#Server = http://mirrors.lax1.thegcloud.com/arch//$repo/os/$arch
#Server = http://mirror.yellowfiber.net/archlinux/$repo/os/$arch
## Uzbekistan
#Server = ftp://mirrors.st.uz/archlinux/$repo/os/$arch
#Server = http://mirrors.st.uz/archlinux/$repo/os/$arch
[eric@blackmesa pacman.d]$
I tried removing core.db from /var/lib/pacman/sync/ and I changed SigLevel to Never in pacman.conf. I've tried other keyservers, and I've tried different mirrors. I'm not sure what to do from this point. I need pacman to continue building my system, so any help would be appreciated. Thanks.
Last edited by mukti (2012-02-27 16:54:47)falconindy wrote:Sounds like this bug.
Thanks! I disabled IPv6, and everything works now. -
Sync issues after iOS 8 update
Hi,
I have an iPhone 5S, 64 GB. After updating to iOS8 I got sync issues. "Waiting for changes to be applied" never disappeared. Also the storage usage in iTunes 11.4 is wrong. iTunes said I had 6GB free, when I had in fact 20GB. I restored the phone back to firmware, restored the backup. All was fine until I made setting changes in iTunes what I want to sync. The same issue in iTunes is back again. I already deleted my voice memos as someone recommended in another threat but that didn't help.
Any ideas how I can solve the problem, would be appreciated. Thank you!Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
How do I get rid of lip-sync issues with iTunes 10.2.2.12?
Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
Card name: NVIDIA GeForce 6200
Manufacturer: NVIDIA
Chip type: GeForce 6200
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
Display Memory: 512.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0012.6099 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0221
SubSys ID: 0x02F3196E
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
Manufacturer ID: 65535
Product ID: 65535
Type: WDM
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Other Files:
Driver Provider: Analog Devices
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P16X.sys
Driver Version: 5.12.0001.0129 (English)
Driver Attributes: Final Retail
Date and Size: 8/14/2003 16:58:12, 1296384 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
Driver Name: hcw88aud.sys
Driver Version: 2.125.28070.0000 (English)
Driver Attributes: Final Retail
Date and Size: 3/12/2010 09:47:58, 13440 bytes
Cap Flags: 0x41
Format Flags: 0xCC0
Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
Driver Name: smwdm.sys
Driver Version: 5.12.0001.7000 (English)
Driver Attributes: Final Retail
Date and Size: 3/22/2005 11:08:40, 260224 bytes
Cap Flags: 0x41
Format Flags: 0xCCC
DirectMusic
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
Registry: OK
Test Result: Not runSelect *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name. -
Having sync issues with Outlook 2011 since upgrading to Mavericks
Hi All,
My work Macbook Pro 13" is having issues syncing my inbox and sent mail automatically. It's a hit or miss if I recieve emails in my inbox in a timely mannor with out pressing the Send/Recive button (even when i press it takes minutes to update). My Sent Items can show up an hour later even if I hit the Send/Recieve button.
All my mail is there and shows up/syncs on my iPhone quickly. I upgraded to Mavericks right when it came out and have only been having these sync issues for the last week or so.
I've cleared my mail cache and that didn't work. My calandar reminders and contacts don't seem to have any issues and no other apps have been preforming slow or strangely.... just my VERY important work email. My tech guys are stumped and I wanted to try you guys before they do a major rehaul of my system
Thanks!A new Outlook Identity will most likely solve your issues. If you have any data under "On My Computer" folders, see this link:
How to move your data to a new Identity
BTW, how much free space on your drive? Use Disk Utility in Applications/Utilities to find this info. You need a minimum of 10% free but 15-20% is recommended.
Outlook gets very sluggish when you are low on disk space. If you have a bunch of older Identities from previous rebuilds you can delete these to help free up space. -
I know that there is little to no support for Windows 7 yet, but, is anyone else having an issues syncing their iPod 5th G with iTunes? It will appear in Windows and in iTunes and then it will be "ejected" and disappears from Windows. iTunes will give a "timed out" error because the iPod is missing. I have an iPhone 3GS and that runs with no issues.
I'm running the final build of 7 (6.1.7600). Anyone have any suggestions?Hey guys! I was in the same boat as all of you, but I was sure their had to be a solution to this problem. I found a solution that worked for me! Ive got the Windows 7 64bit, and my ipod is sycning as we speak! Follow these steps.
1. Disconnect your iPod Shuffle from your PC
2. Press CTRL-ALT-DEL, start the Task-Manager, go to Processes and end the process for "ITunesHelper.exe" (this will prevent iTunes from starting when you re-connect the Shuffle.
3. Now, re-connect the iPod Shuffle - iTunes should NOT start by itself and you should be able to see your Shuffle within the list of your drives (My Computer.
4. Next, download SharePod from http://www.getsharepod.com/download/ and extract the .zip file and start the Sharepod.exe
5. If everything works out, Sharepod will recognize your iPod Shuffle
6. Sharpod won't start if iTunes is open but it will work vice-versa. So, start iTunes NOW and keep Sharepod OPEN.
7. iTunes will re-detect your Shuffle but it will still be available as a hard-drive afterwards as long as you keep Sharepod OPEN. Detection can take up to 30 seconds so be patient.
8. Now go to the iPod Summary tab within iTunes and DESELECT "open itunes when this ipod is attached". Scroll down on the same page and also check the "enable disk use" checkbox. Click the contents tab, then the settings button and choose the amount of disk space to allocate. I chose 5MB. Click back to the settings tab and APPLY those changes.
9. Close iTunes WITHOUT ejecting the iPod.
10. Close Sharepod and simply disconnect your iPod Shuffle (i.e. pull it off the dock).
11. Reboot your computer. After the reboot ITunesHelper.exe will be running again you don't have to care about Sharepod or processes anymore. That is, you can delete sharepod if you want.
12. Simply connect your iPod to the PC as you used to do, open up iTunes and everything should work as it did back in the good old days.
NOTE: Don't eject the iPod from within iTunes going forward, simply disconnect it from the PC manually by pulling it off the dock yourself when you're done.
This solved my sync issues, and I hope it does for you too.
Maybe you are looking for
-
Macbook (m2009) to Samsung tv stopped working!
Please can someone help with this: I have a Macbook Pro mid-2009, running Yosemite, NVIDIA GeForce 9400M 256MB, with 2.8ghz Intel Core 2 Duo Processor and 4GB RAM. I have had a connection via mini-DVI - HDMI converter to a Samsung TV for the past few
-
請問在NI網站上有NI LabVIEW Report Generation for microsoft office V 1.1.2
NI 網站上提供Report Generation for microsoft office 版本為1.1.3 可是我用的Lab View是8.0版,不適用. 找了許久都沒看到有1.1.2.
-
How to link information in a form to a server?
coudl someone tell me how to link a data in a form to a server...i came across some wsdl ui(dono if i spelled it right), and i dono how to get that..so please can anyone help
-
Come posso trasformare la mia versione di photoshop c3 extended in photoshop c6?
ciao, ho un abbonamento adobe, prima di avere il computer nuovo avevo photoshop c6 e mi trovavo benissimo, ora ho comprato il pc nuovo e dentro chi me l ha venduto mi ha regalato photoshop c3, solo che quando ho installato photoshop c6 da adobe creat
-
Pardon this basic question! Two users using BC4J against the same database, using Swing applications. User A inserts a new record into table T. Commits changes. Later, user B needs to update / access the new record in T. Neither user has logged off (