[SOLVED] pacman -Scc --noconfirm does not work in script.
see https://github.com/nfnty/dockerfiles/issues/2 for more details, It confirms the second 'y', but not the first 'y'.
Last edited by GutenYe (2015-05-17 06:25:58)
Scimmia wrote:Depends on the interpreter. In Bash, you could use pacman -Scc <<< Y <<< Y
Great, Thank you @Scimmia.
Similar Messages
-
Hi.
I would like to ask for one thing: i can't suspend to ram or resume from suspend to ram.
I treid to check over www in order to find some help, some solutions, and how to fix that. Unfortunately, i found these:
https://forums.opensuse.org/showthread. … 13-2/page2
https://bugzilla.opensuse.org/show_bug.cgi?id=913105
https://forums.opensuse.org/showthread. … S-13-1-x64
Bug 91921 - WD 2TB Caviar black causes hard lock on resume S2RAM
https://bugzilla.kernel.org/show_bug.cgi?id=91921
In fact, when i was researching of this problem i wanted to check if my graphic card and memory are failing so a did few changes (removed memory stick and so one) but in doing this i removed almost all of my hard disk drives because i didn't want to hurt them with many reboots or resets.
What did i find? It is strange, kernel version is not important because i checked most of them.
I removed 2x2TB Seagate F14 series along with 4x3TB WD Green. Then i checked s2ram, it went to suspend, and resumes correctly. Everything works. I put it to sleep with s2ram -f -a 1. Works
I attached my 4x3TB WD Green drives. I put computer to sleep with s2ram...it causes hard lock, black screen, i could do only poweroff by powerbutton. s2ram -f -a 1 causes freez. Sometimes, but not constantly, s2ram -f -a 3 -p is being able to suspend...(mostly it does a freez, hard lock computer) but sometimes it is able to put it to a sleep, but resume just freezes everyting - no blinking cursor, no blinking num lock led and so on.
I know that you would suggest me to check logs - this is the main problem. Logs for pm-suspend works when i suspend or resume without WD drives attached. When i have them connected, i'm not able to check pm-logs because computer hangs, freezes and logs are not being stored/writed to pm-suspend.log and pm-powersave.log.
Could somebody help? Point me to a solution? I can't check logs because there are not any when freezing occurs. I checked openSuse thread and many others and for other systems there were some kernel fixex, patches.
They wrote that WD blacks are at fault because they don't have APM. Well, in fact my WD Green have APM with very aggresive factory settings: they park heads over 8 seconds not being used. I disabled it in firmware but disabling it is not the point and not the problem. People have the same problem even with APM and parking heads on other WD drives, i found it that some have it with WD Red's drives and even with very old 320GB WD Blue series - what is more funny, i have 640GB AAKS blue from WD and with this drive i can suspend or resume - APM on this drive is also unavilable, like in Green series because i changed it with wdidle with prebootable cd. I can't supend or resume with 3TB WD Greens.
BTW - suspend to disk, with pm-utils and uswsusp works ok, in 100% every time. (i had to add "shutdown method = shutdown" to /etc/suspend.conf from uswsusp package).
On Windows machine it works. Can suspend, can resume, can hibernate.
Last edited by firekage (2015-03-07 03:27:28)Hm, sometimes i found myself astonished because some things just does not work at all on one machine, while the other one has no problem at all. I was trying to find why suspend to ram won't work at all...and while i was searching i found one topic that was leading to upower dbus. Similar problem with upower i found, by coincidence, on Manjaro forum.
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
this command above returns all the time:
Error org.freedesktop.DBus.Error.UnknownMethod: Method "Suspend" with signature "" on interface "org.freedesktop.UPower" doesn't exist
I tried this:
sudo systemctl enable acpid.service
sudo systemctl --system daemon-reload
sudo systemctl restart systemd-logind
As soon as i enabled and started acpid.service...my supend to ram, from kde, works like a charm, without graphic problem, or freezing.
There is few question: why on my desktop suspend doesen't work out of the box, when even archwiki says it should? Why on my netbook machine (Acer AOD270) that has the same package installed it works out of the box? Why on my desktop machine acpid.service was not enabled, was not started and was not running while on the notebook it does?
Anyway...i fixed it by a big coincidence because on Fedora forum somebody has problem with suspend to ram with nvidia GTX750 and this card was new like my card (GTX660). He posted the same problem with upower that i posted in quotes and because of this i found another thing on Manjaro forum and that was it!
BTW - this problem, i now think, is not related to my WD drives because it works with them. I think that there was another one ugly thing that broke my suspend to ram ability - bios of my motherboard (so called uefi bios with support for old one) has no option for S1-S5 stated (like the previous motherboards had) and only have ASPM...and ASPM is in my opinion broken but i will try to veryfi it one again later.
Last edited by firekage (2015-03-07 03:29:20) -
What can I do to solve 3G service that does not work properly on iPad3?
Hi, I have problem with my new iPad3. the thing is that 3G service does not work properly, while Edge service is ok. I realize that it is not because of my Sim, but the device itself. What can I do? any idea? thank in advance.
I wish it was that. When I turn on 3G, the signal is full. Then, when I connect internet using 3G, its signal turn to 2G, Searching, No service, searching, and finally go back to 3G agian. This happen every minute although I tried to move to a hight 3G signal.
-
[SOLVED] Lightdm theming (GTK) does not work?
Hi,
Silly maybe, but in trying out lightdm(-GTK) to replace gdm, I am unable to change the GTK-theme in /etc/lightdm/lightdm-gtk-greeter.conf.
I was able to change the background and the font, but the theme, the icon (and maybe cursor) remain the default grey. I have tried using Adwaita, which should be installed together with gnome 3 and I have installed gnome-shell-theme-faience from AUR to try it out. None of them are working.
Maybe this is related:
I do seem to have another problem with the user-theme-extension: it was outdated according to extensions.gnome.org, so I removed it with pacman and I installed it via the gnome website. But gnome-tweak-tool keeps telling me there is an error with the extension and I'm not able to set a user theme with that tool...
Anybody have a clue? The wiki nor the AUR hold much info on this and the web is talking about the unity-greeter mostly...
Last edited by zenlord (2012-06-18 17:18:07)The lack of responses seem to indicate two possibilities:
1. I'm the only one having a problem, or
2. This is not a bug - I should theme lightdm-gtk manually.
In either case: the extension-problem is solved now, so that should not interfere (anymore), and upgrading to the latest lightdm(-gtk-greeter) has not solved the problem...
Last edited by zenlord (2012-06-05 08:02:40) -
[SOLVED] Hotplugging Synaptics touchpad does not work
Hey there,
I tried to hotplug my touchpad with X.org/HAL but to no avail :(
Here's my /etc/hal/fdi/policy/11-x11-synaptics.fdi:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.product" contains="ETPS/2 Elantech Touchpad">
<append key="info.capabilities" type="strlist">input.touchpad</append>
</match>
<match key="info.capabilities" contains="input.touchpad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">3</merge>
<merge key="input.x11_options.TapButton3" type="string">2</merge>
<!-- Arbitrary options can be passed to the driver using
the input.x11_options property since xorg-server-1.5. -->
<!-- EXAMPLES:
Switch on shared memory, enables the driver to be configured at runtime
<merge key="input.x11_options.SHMConfig" type="string">true</merge>
Maximum movement of the finger for detecting a tap
<merge key="input.x11_options.MaxTapMove" type="string">2000</merge>
Enable vertical scrolling when dragging along the right edge
<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>
Enable vertical scrolling when dragging with two fingers anywhere on the touchpad
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
Enable horizontal scrolling when dragging with two fingers anywhere on the touchpad
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
If on, circular scrolling is used
<merge key="input.x11_options.CircularScrolling" type="string">true</merge>
For other possible options, check CONFIGURATION DETAILS in synaptics man page
-->
</match>
</device>
</deviceinfo>
However, lshal doesn't show that my touchpad's input.x11_driver = 'synaptics' thus X.org doesn't recognise it:
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.touchpad'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event7' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input7/event7' (string)
I'm at a loss about how to solve this and I've disabled hotplugging as a temporary though not optimal measure. Someone help me :(
Last edited by rofflwaffls (2009-04-08 11:06:41)X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28-ARCH i686
Current Operating System: Linux localhost 2.6.29-ARCH #1 SMP PREEMPT Sun Mar 29 18:08:33 UTC 2009 i686
Build Date: 02 March 2009 06:09:25PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 5 08:42:39 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:5:0) nVidia Corporation C51 [Geforce 6150 Go] rev 162, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xb1000000/16777216, BIOS @ 0x????????/131072
(--) PCI: (0@0:10:3) nVidia Corporation MCP51 PMU rev 163, Mem @ 0xb0040000/262144
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 180.44 Mon Mar 23 15:29:02 PST 2009
(II) Loading extension GLX
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 180.44 Mon Mar 23 15:05:32 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 00@00:05:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce Go 6150 (C51) at PCI:0:5:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 05.51.28.53.15
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce Go 6150 at PCI:0:5:0:
(--) NVIDIA(0): LPL (DFP-0)
(--) NVIDIA(0): LPL (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0): will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
(II) NVIDIA(0): configuration option may not be set correctly. When the
(II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
(II) NVIDIA(0): try to use it to receive ACPI event notifications. For
(II) NVIDIA(0): details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_variant" "dvorak"
(II) config/hal: Adding input device HID 062a:0000
(**) HID 062a:0000: always reports core events
(**) HID 062a:0000: Device: "/dev/input/event7"
(II) HID 062a:0000: Found 3 mouse buttons
(II) HID 062a:0000: Found x and y relative axes
(II) HID 062a:0000: Found scroll wheel(s)
(II) HID 062a:0000: Configuring as mouse
(**) HID 062a:0000: YAxisMapping: buttons 4 and 5
(**) HID 062a:0000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 062a:0000" (type: MOUSE)
(**) HID 062a:0000: (accel) keeping acceleration scheme 1
(**) HID 062a:0000: (accel) filter chain progression: 2.00
(**) HID 062a:0000: (accel) filter stage 0: 20.00 ms
(**) HID 062a:0000: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_variant" "dvorak" -
I moved to archlinux nearly a month ago. I liked it from the start. Finally a distro I could love. Back then the kernel version was 3.7.9. My old HP-PSC1315 printer worked flawless. Just installed and enabled cups, then installed hplip, ran hp-probe and hp-setup -i. But soon the kernel was updated to 3.8.3 and then to 3.8.4. Since that I keep getting the message "Filter failed" despite all my efforts. But the scanner works normally. It does not seem to be a problem caused by the updating of hplip or cups. It seems to be a compatibility problem with kernel 3.8, because when I downgrade to 3.7.9 the newest versions of hplip and cups work fine. The only way I found out to circumvent the problem is to print from a virtualbox machine where the [core] packages were installed from an old repository with kernel 3.7--a very annoying work around.
Could anyone help me, please?
Last edited by tenoriocalc (2013-04-12 23:57:53)Thanks for the advice. I agree it is hard to blame kernel 3.8 on that. But hplip 3.13.3, cups 1.6.2 and foomatic 1:4.0.17 have the same versions on both cases. Setting "cupsctl LogLevel=debug2" produces a very verbose /var/log/cups/error_log file. Below I have omitted most of it and select only what I think is most significant. Sorry for the long post.
d [30/Mar/2013:13:48:27 -0300] cupsdFinishProcess(pid=1749, name=0x7fff88f156c0, namelen=1024, job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/pstopdf"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1749 (/usr/lib/cups/filter/pstopdf) exited with no errors.
d [30/Mar/2013:13:48:27 -0300] cupsdFinishProcess(pid=1750, name=0x7fff88f156c0, namelen=1024, job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/pdftopdf"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1750 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [30/Mar/2013:13:48:27 -0300] [Job 18] Failed to send: org.freedesktop.ColorManager.NotFound:device id 'psc_1310' does not exists
D [30/Mar/2013:13:48:27 -0300] [Job 18] Failed to get profile filename!
I [30/Mar/2013:13:48:27 -0300] [Job 18] no profiles specified in PPD
D [30/Mar/2013:13:48:27 -0300] [Job 18] Ghostscript command line: /usr/bin/gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -sDEVICE=cups -sstdout=%stderr -sOutputFile=%stdout -sMediaType=Plain -sOutputType=0 -r600x600 -dMediaPosition=7 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsRowStep=1 -dcupsInteger0=2 -dcupsInteger1=3 -scupsPageSizeName=Letter -I/usr/share/cups/fonts -c -f -_
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
d [30/Mar/2013:13:48:27 -0300] select_timeout: JobHistoryUpdate=1364748446
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[8]="HOME=/var/spool/cups/tmp"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[10]="SERVER_ADMIN=root@ArchLinux"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[11]="SOFTWARE=CUPS/1.6.2"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[13]="USER=root"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[14]="CUPS_MAX_MESSAGE=2047"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[17]="IPP_PORT=631"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[18]="CHARSET=utf-8"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[19]="LANG=en_US.UTF-8"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[20]="PPD=/etc/cups/ppd/psc_1310.ppd"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[21]="RIP_MAX_CACHE=128m"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[22]="CONTENT_TYPE=application/postscript"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[23]="DEVICE_URI=hp:/usb/psc_1310_series?serial=BR57E3H0YGO2"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[24]="PRINTER_INFO="
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[25]="PRINTER_LOCATION="
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[26]="PRINTER=psc_1310"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[27]="PRINTER_STATE_REASONS=none"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[28]="CUPS_FILETYPE=document"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[29]="FINAL_CONTENT_TYPE=printer/psc_1310"
D [30/Mar/2013:13:48:27 -0300] [Job 18] envp[30]="AUTH_INFO_REQUIRED=none"
d [30/Mar/2013:13:48:27 -0300] select_timeout: JobHistoryUpdate=1364748446
I [30/Mar/2013:13:48:27 -0300] [Job 18] Start rendering...
D [30/Mar/2013:13:48:27 -0300] [Job 18] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [30/Mar/2013:13:48:27 -0300] [Job 18] STATE: +connecting-to-device
D [30/Mar/2013:13:48:27 -0300] [Job 18] prnt/backend/hp.c 745: ERROR: open device failed stat=12: hp:/usb/psc_1310_series?serial=BR57E3H0YGO2
job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/backend/hp"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1753 (/usr/lib/cups/backend/hp) stopped with status 1.
job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/hpcups"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1752 (/usr/lib/cups/filter/hpcups) did not catch or ignore signal 13.
d [30/Mar/2013:13:48:27 -0300] cupsdFinishProcess(pid=1751, name=0x7fff88f156c0, namelen=1024, job_id=0x7fff88f156bc(18)) = "/usr/lib/cups/filter/gstoraster"
D [30/Mar/2013:13:48:27 -0300] [Job 18] PID 1751 (/usr/lib/cups/filter/gstoraster) stopped with status 13.
d [30/Mar/2013:13:48:27 -0300] select_timeout: JobHistoryUpdate=1364748446
d [30/Mar/2013:13:48:27 -0300] finalize_job(job=0x7f1f9bd8d730(18))
d [30/Mar/2013:13:48:27 -0300] cupsdSetPrinterReasons(p=0x7f1f9bdb3740(psc_1310),s="-connecting-to-device,cups-remote-pending,cups-remote-pending-held,cups-remote-processing,cups-remote-stopped,cups-remote-canceled,cups-remote-aborted,cups-remote-completed"
d [30/Mar/2013:13:48:27 -0300] cupsdSetPrinterReasons(p=0x7f1f9bdb3740(psc_1310),s="-offline-report"
I [30/Mar/2013:13:48:27 -0300] [Job 18] Printer stopped due to backend errors; please consult the error_log file for details.
Last edited by tenoriocalc (2013-03-31 00:42:26) -
Good Day to ALL!
I have a script of SQLPlus that creates a report. I have 8/9 numeric columns which are 'SUM'ed up thru 'COMPUTE' command. It works for all BUT 2 columns. If I put these two columns, compute does not take affect. If I remove these two columns ( just cut) 'COMPUTE' works fine!!! These two coulumns use DB Function. But I have other column that also use DB Function. These two columns has some extra additions. Any thing wrong with the script/column defn.
Thanks - Pradip (Pradip Biswas @Singapore) Could you pl. reply to [email protected]
Here is bit of script. Sorry about the length of the cut and paste.
COLUMN OPEN_QTY_BAL FORMAT 9,99,990 HEADING 'Opening|Qty' Justify LEFT
COLUMN OPEN_QTY_VALUE FORMAT 99,999,990 HEADING 'Opening|S$' Justify LEFT
COLUMN PO_RECEIPTS_QTY FORMAT 99,990 HEADING 'PO Rec|QTY ' Justify LEFT
COLUMN PO_RECEIPTS_QTY_VALUE FORMAT 9,999,990 Heading 'PO Rec|S$' Justify LEFT
COLUMN MISC_RECEIPTS_QTY Format 99,990 Heading 'Misc |Qty' Justify LEFT
Column MISC_RECEIPTS_QTY_VALUE Format 9,999,990 Heading 'Misc|S$' Justify LEFT
COLUMN WORKORDER_QTY FORMAT 99,990 HEADING 'WorkOrd|Qty' Justify LEFT
COLUMN WorkOrder_QTY_VALUE Format 9,999,990 HEADING 'WorkOrd|S$' Justify LEFT
COLUMN SALES_SHIPMENT_QTY FOrmat 99,990 Heading 'SalesShip|Qty' Justify LEFT
COLUMN SALES_SHIPMENT_QTY_VALUE FOrmat 9,999,990 Heading 'SalesShip|S$' Justify LEFT
COLUMN MISC_ISSUE_QTY Format 99,999 HEADing 'Misc|Qty' Justify LEFT
COLUMN MISC_ISSUE_QTY_VALUE Format 9,999,990 heading 'Misc|S$' Justify LEFT
COLUMN TRANSFER_QTY format 99,990 heading 'Transfer|Qty' Justify LEFT
COLUMN TRANSFER_QTY_VALUE format 99,999,990 heading 'Transfer|S$' Justify LEFT
COLUMN REVAL_VALUE Format 99,990 Heading 'Reval|S$' Justify LEFT
COLUMN ON_HAND_QTY FORMAT 9,99,990 HEADING 'Closing|Qty' Justify LEFT
COLUMN ON_HAND_QTY_VALUE FORMAT 99,999,999,990 HEADING 'Closing|S$' Justify LEFT
REPHEADER on
REPHEADER left ' GL Period From: &&P_GL_PERIOD_NAME_FROM ' skip left ' GL Period To : &&P_GL_PERIOD_NAME_TO ' skip left ' Inv Org Code : &&P_INV_ORG_CODE ' skip left 'SubInventory Code : &&P_SUBINVENTORY_CODE ' skip 2
TTITLE left 'H - Inv Inventory Movement Report as at:' TTITLE_DATE RIGHT 'PAGE:' FORMAT 999 SQL.PNO SKIP 2
BTITLE skip 1 CENTER 'COMPANY CONFIDENTIAL - Printed on ' TTITLE_DATE
BREAK on REPORT skip 1;
--rem(1) compute SUM label 'Total' of OPEN_QTY_VALUE PO_RECEIPTS_QTY_VALUE MISC_RECEIPTS_QTY_VALUE WorkOrder_QTY_VALUE SALES_SHIPMENT_QTY_VALUE MISC_ISSUE_QTY_VALUE TRANSFER_QTY_VALUE REVAL_VALUE on report;
--REM(2) compute SUM label 'Total $S: ' of OPEN_QTY_VALUE REVAL_VALUE on report;
--REM(3) compute SUM label 'Total $S: ' of OPEN_QTY_VALUE REVAL_VALUE ON_HAND_QTY_VALUE on report;
compute SUM label 'Total $S:' of OPEN_QTY_VALUE PO_RECEIPTS_QTY_VALUE MISC_RECEIPTS_QTY_VALUE WorkOrder_QTY_VALUE SALES_SHIPMENT_QTY_VALUE MISC_ISSUE_QTY_VALUE TRANSFER_QTY_VALUE REVAL_VALUE on report;
WHENEVER SQLERROR EXIT FAILURE
select
-- MSI.ORGANIZATION_ID ORGANIZATION_ID,
-- MSI.INVENTORY_ITEM_ID INVENTORY_ITEM_ID,
MSI.SEGMENT1||'//'||MSI.DESCRIPTION ITEM,
-- MSI.DESCRIPTION DESCRIPTION,
All_Item_subinv.SUBINVENTORY_CODE SUBINVENTORY,
MSIV.PRIMARY_UOM_CODE UOM,
--NVL(MOQ_OPen_BAL.OPEN_QTY_BAL ,0) OPEN_QTY_BAL ,
-- NVL(MOQ_OPen_BAL.OPEN_QTY_BAL,0) * NVL(AVG_ITEM_COST1.ITEM_COST,0) OPEN_QTY_VALUE,
(MOQ_OPen_BAL( All_Item_subinv.SUBINVENTORY_CODE,
MSI.ORGANIZATION_ID,
MSI.INVENTORY_ITEM_ID,
'&P_GL_PERIOD_NAME_FROM') ) OPEN_QTY_BAL ,
(MOQ_OPen_BAL_VAL( All_Item_subinv.SUBINVENTORY_CODE,
mSI.ORGANIZATION_ID,
MSI.INVENTORY_ITEM_ID,
'&P_GL_PERIOD_NAME_FROM')
) OPEN_QTY_VALUE,
NVL(AGGREGATED_MTT.PO_RECEIPTS_QTY,0) PO_RECEIPTS_QTY,
NVL(AGGREGATED_MTT.PO_RECEIPTS_QTY_VALUE,0) PO_RECEIPTS_QTY_VALUE,
NVL(AGGREGATED_MTT.MISC_RECEIPTS_QTY,0) MISC_RECEIPTS_QTY,
NVL(AGGREGATED_MTT.MISC_RECEIPTS_QTY_VALUE,0) MISC_RECEIPTS_QTY_VALUE,
NVL(AGGREGATED_MTT.WORKORDER_QTY,0) WORKORDER_QTY,
NVL(AGGREGATED_MTT.WorkOrder_QTY_VALUE,0) WorkOrder_QTY_VALUE,
NVL(AGGREGATED_MTT.SALES_SHIPMENT_QTY,0) SALES_SHIPMENT_QTY,
NVL(AGGREGATED_MTT.SALES_SHIPMENT_QTY_VALUE,0) SALES_SHIPMENT_QTY_VALUE,
NVL(AGGREGATED_MTT.MISC_ISSUE_QTY,0) MISC_ISSUE_QTY,
NVL(AGGREGATED_MTT.MISC_ISSUE_QTY_VALUE,0) MISC_ISSUE_QTY_VALUE,
NVL(AGGREGATED_MTT.TRANSFER_QTY,0) TRANSFER_QTY,
NVL(AGGREGATED_MTT.TRANSFER_QTY_VALUE,0) TRANSFER_QTY_VALUE,
NVL(AGGREGATED_MTT.REVAL_VALUE,0) REVAL_VALUE,
(MOQ_OPen_BAL(All_Item_subinv.SUBINVENTORY_CODE,
MSI.ORGANIZATION_ID,
MSI.INVENTORY_ITEM_ID,
'&P_GL_PERIOD_NAME_FROM')
+
nvl(AGGREGATED_MTT.PO_RECEIPTS_QTY,0) +
nvl(AGGREGATED_MTT.MISC_RECEIPTS_QTY,0) +
nvl(AGGREGATED_MTT.WORKORDER_QTY,0) +
nvl(AGGREGATED_MTT.SALES_SHIPMENT_QTY,0) +
nvl(AGGREGATED_MTT.MISC_ISSUE_QTY,0) +
nvl(AGGREGATED_MTT.TRANSFER_QTY,0) ) ON_HAND_QTY,
((MOQ_OPen_BAL_VAL( All_Item_subinv.SUBINVENTORY_CODE,MSI.ORGANIZATION_ID,MSI.INVENTORY_ITEM_ID,'&P_GL_PERIOD_NAME_FROM'))
+(nvl( AGGREGATED_MTT.PO_RECEIPTS_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.MISC_RECEIPTS_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.WorkOrder_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.sALES_SHIPMENT_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.MISC_ISSUE_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.TRANSFER_QTY_VALUE,0) )
+nvl( AGGREGATED_MTT.REVAL_VALUE,0)) ON_HAND_QTY_VALUE -- column alias
FROM
-- In line View for MSI
(select distinct MMT.ORGANIZATION_ID, MMT.INVENTORY_ITEM_ID, MMT.SUBINVENTORY_CODE
From MTL_MATERIAL_TRANSACTIONS MMT,
ORG_ORGANIZATION_DEFINITIONS OOD,
MTL_ONHAND_QUANTITIES moq
where
OOD.organization_code = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
AND OOD.inventory_enabled_flag = 'Y'
AND OOD.operating_unit = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
AND OOD.SET_OF_BOOKS_ID = fnd_profile.value('GL_SET_OF_BKS_ID') --1 --fnd_profile.value('GL_SET_OF_BKS_ID')
AND MMT.ORGANIZATION_ID = OOD.organization_id
AND MMT.SUBINVENTORY_CODE = NVL('&P_SUBINVENTORY_CODE', MMT.SUBINVENTORY_CODE)
and MMT.ORGANIZATION_ID = MOQ.ORGANIZATION_ID -- to eliminate consigend items:2007Jan04:PKB
and MMT.INVENTORY_ITEM_ID = MOQ.INVENTORY_ITEM_ID --,,
and MMT.SUBINVENTORY_CODE = MOQ.SUBINVENTORY_CODE --,,
UNION
Select distinct MOQ.ORGANIZATION_ID, MOQ.INVENTORY_ITEM_ID, MOQ.SUBINVENTORY_CODE
from MTL_ONHAND_QUANTITIES MOQ,
ORG_ORGANIZATION_DEFINITIONS OOD2
WHERE
OOD2.organization_code = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
AND OOD2.inventory_enabled_flag = 'Y'
AND OOD2.operating_unit = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
AND OOD2.SET_OF_BOOKS_ID = fnd_profile.value('GL_SET_OF_BKS_ID') --1 --fnd_profile.value('GL_SET_OF_BKS_ID')
AND moq.ORGANIZATION_ID = OOD2.organization_id
AND moq.SUBINVENTORY_CODE = NVL('&P_SUBINVENTORY_CODE', moq.SUBINVENTORY_CODE)
) ALL_Item_SUBInv,
MTL_SYSTEM_ITEMS_B MSI,
Mtl_System_Items_Vl MSIV,
(SELECT
MMT.ORGANIZATION_ID ORGANIZATION_ID,
MMT.INVENTORY_ITEM_ID INVENTORY_ITEM_ID,
MMT.SUBINVENTORY_CODE SUBINVENTORY_CODE,
-- PO RECEIPTS.
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Purchase order')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('PO Receipt','PO Rcpt Adjust','Return to Vendor')
THEN
--MMT.TRANSACTION_QUANTITY
mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) PO_RECEIPTS_QTY,
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Purchase order')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('PO Receipt','PO Rcpt Adjust','Return to Vendor')
THEN
NVL(MMT.ACTUAL_COST,0)* nvl(mmt.primary_quantity,0)
MMT.TRANSACTION_COST * NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) PO_RECEIPTS_QTY_VALUE,
-- MISC RECEIPTS.
SUM( CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Account','Inventory')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Account receipt','Miscellaneous receipt')
THEN
--MMT.TRANSACTION_QUANTITY
mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) MISC_RECEIPTS_QTY,
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Account', 'Inventory')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Account receipt','Miscellaneous receipt')
THEN
NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) MISC_RECEIPTS_QTY_VALUE,
-- WorkOrder Qty and S$
SUM( CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Job or Schedule')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('WIP Assembly Return','WIP Assy Completion','WIP component issue','WIP Component Return')
THEN
--MMT.TRANSACTION_QUANTITY
mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) WORKORDER_QTY,
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Job or Schedule')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('WIP Assembly Return','WIP Assy Completion','WIP component issue','WIP Component Return')
THEN
NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) WorkOrder_QTY_VALUE,
-- Sales Shipment
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Sales order','RMA')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Sales order issue','Sales Order Pick','RMA Return','RMA Receipt')
THEN
--MMT.TRANSACTION_QUANTITY
mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) SALES_SHIPMENT_QTY,
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Sales order','RMA')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Sales order issue','Sales Order Pick','RMA Return','RMA Receipt')
THEN
NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) SALES_SHIPMENT_QTY_VALUE,
-- MISC ISSUE
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Inventory','Account' )
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Miscellaneous issue','Account issue')
THEN
--MMT.TRANSACTION_QUANTITY
mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) MISC_ISSUE_QTY,
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Inventory','Account' )
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Miscellaneous issue','Account issue')
THEN
NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) MISC_ISSUE_QTY_VALUE,
-- Transfers
SUM( CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Inventory' )
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Subinventory Transfer')
THEN
--MMT.TRANSACTION_QUANTITY
mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) TRANSFER_QTY,
SUM( CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Inventory')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Subinventory Transfer')
THEN NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) TRANSFER_QTY_VALUE,
-- Adjustment to Cost (Revaluation)
SUM(CASE
WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Standard cost update','Job or Schedule')
THEN
CASE
WHEN MTT.TRANSACTION_TYPE_NAME in
('Standard cost update','WIP cost update')
THEN
--2007JAN03:PKB MMT.TRANSACTION_COST
MMT.TRANSACTION_COST* MMT.QUANTITY_ADJUSTED
ELSE 0
END
ELSE 0
END ) REVAL_VALUE
FROM
MTL_MATERIAL_TRANSACTIONS MMT,
--GL_PERIODS GP,
MTL_TRANSACTION_TYPES MTT,
MTL_TXN_SOURCE_TYPES MTST,
ORG_ORGANIZATION_DEFINITIONS OOD
WHERE
OOD.organization_code = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
AND OOD.inventory_enabled_flag = 'Y'
AND OOD.operating_unit = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
AND OOD.SET_OF_BOOKS_ID = fnd_profile.value('GL_SET_OF_BKS_ID') --1 --fnd_profile.value('GL_SET_OF_BKS_ID')
AND MMT.ORGANIZATION_ID = OOD.organization_id
AND MMT.SUBINVENTORY_CODE = NVL('&P_SUBINVENTORY_CODE', MMT.SUBINVENTORY_CODE)
-- AND GP.PERIOD_SET_NAME = 'HF-ACCTG-CAL' -- Hardcoded PKB
AND
( (EXISTS
( select GP.Period_name
FROM GL_PERIODS GP
where TO_DATE(TO_CHAR(MMT.TRANSACTION_DATE,'DD-MM-YYYY'),'DD-MM-YYYY')
>= TO_DATE(TO_CHAR(GP.START_DATE,'DD-MM-YYYY'),'DD-MM-YYYY') --Between GP.START_DATE and GP.END_DATE
AND GP.PERIOD_NAME = '&P_GL_PERIOD_NAME_FROM'
and GP.PERIOD_SET_NAME = 'HF-ACCTG-CAL'
AND NVL('&P_GL_PERIOD_NAME_FROM','ALL') != 'ALL'
OR (NVL('&P_GL_PERIOD_NAME_FROM' ,'ALL') = 'ALL')
AND
( (EXISTS
( select GP.Period_name
FROM GL_PERIODS GP
where TO_DATE(TO_CHAR(MMT.TRANSACTION_DATE,'DD-MM-YYYY'),'DD-MM-YYYY')
<= TO_DATE(TO_CHAR(GP.END_DATE,'DD-MM-YYYY'),'DD-MM-YYYY')
AND GP.PERIOD_NAME = '&P_GL_PERIOD_NAME_TO'
and GP.PERIOD_SET_NAME = 'HF-ACCTG-CAL'
AND NVL('&P_GL_PERIOD_NAME_TO','ALL') != 'ALL'
OR (NVL('&P_GL_PERIOD_NAME_TO','ALL') = 'ALL')
AND MMT.TRANSACTION_TYPE_ID = MTT.TRANSACTION_TYPE_ID
AND MMT.TRANSACTION_SOURCE_TYPE_ID = MTST.TRANSACTION_SOURCE_TYPE_ID
group by
MMT.ORGANIZATION_ID,
MMT.INVENTORY_ITEM_ID,
MMT.SUBINVENTORY_CODE
) AGGREGATED_MTT,
-- Inline Table for AVG_ITEM_COSTs 2nd time,
(SELECT
CIC.ORGANIZATION_ID ORGANIZATION_ID,
CIC.INVENTORY_ITEM_ID INVENTORY_ITEM_ID,
CIC.COST_TYPE_ID COST_TYPE_ID,
CCT.COST_TYPE COST_TYPE,
NVL(CIC.ITEM_COST ,0) ITEM_COST
FROM
CST_ITEM_COSTS CIC,
CST_COST_TYPES ccT,
ORG_ORGANIZATION_DEFINITIONS OOD1
WHERE
CCT.COST_TYPE_ID = CIC.COST_TYPE_ID
/*AND (
(CCT.COST_TYPE = 'Average' and '&P_INV_ORG_CODE' = 'HS')
OR
(CCT.COST_TYPE = 'Frozen' and '&P_INV_ORG_CODE' = 'HL')
AND CCT.COST_TYPE_ID =
( select m.primary_cost_method
from mtl_parameters m
where m.organization_id = OOD1.ORGANIZATION_ID
and OOD1.organization_code = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
AND OOD1.inventory_enabled_flag = 'Y'
AND OOD1.operating_unit = fnd_profile.value('ORG_ID') 83 --fnd_profile.value('ORG_ID')
AND OOD1.SET_OF_BOOKS_ID = fnd_profile.value('GL_SET_OF_BKS_ID') 1 --fnd_profile.value('GL_SET_OF_BKS_ID')
AND cic.ORGANIZATION_ID = OOD1.organization_id
) AVG_ITEM_COST1
WHERE
AGGREGATED_MTT.ORGANIZATION_ID(+) = All_Item_subinv.ORGANIZATION_ID
AND AGGREGATED_MTT.INVENTORY_ITEM_ID(+) = All_Item_subinv.INVENTORY_ITEM_ID
AND AGGREGATED_MTT.subinventory_code(+) = All_Item_subinv.subinventory_code
AND All_Item_subinv.ORGANIZATION_ID = MSI.ORGANIZATION_ID
AND ALL_Item_SUBInv.INVENTORY_ITEM_ID = MSI.INVENTORY_ITEM_ID
AND AVG_ITEM_COST1.ORGANIZATION_ID(+) = MSI.ORGANIZATION_ID
AND AVG_ITEM_COST1.INVENTORY_ITEM_ID(+) = MSI.INVENTORY_ITEM_ID
and msi.ROWID = MSIV.ROW_ID
and msi.ORGANIZATION_ID = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
and sysdate between NVL(msi.start_date_active,sysdate -1 )
and NVL(msi.end_date_active,sysdate+1)
Order BY
MSI.SEGMENT1,
MSI.DESCRIPTION ,
All_Item_subinv.SUBINVENTORY_CODE
/Hi Barry and All: This indeed is a bug in SQLPLUS ! Version 9.2.0.1.0 as well.
Thanks for asking the version no of SQLLPLUs. I was working thru Oracle Apps 11i.10 (concurrent program). So I did not get any message from SQLPLUS.
I tested independently in SQLPLUS and got the message! Thanks Oracle!!!
The Bug is in the name of COLUMN NAME or ALIAS Name. I renamed the columns from ON_HAND_QTY and ON_HAND_VALUE to CLOSE_QTY and CLOSE_QTY_VALUE. It worked!! The string 'ON' in the column/alias name is taken as 'ON' keyword/clause for 'compute' statement for SQLPLUS.
Here is the message from SQLPLUS
" SP2-0084: COMPUTE ON keyword specified already"
See these two line and compare
--compute SUM label 'Total $S: ' of SALARY ON_SALARY on report;
compute SUM label 'Total $S: ' of SALARY on report;
Thanks - Pradip
Here is the sample code to simulate. (not Big :))
WHENEVER SQLERROR EXIT FAILURE
CLEAR computes
CLEAR BREAKS
clear column
TTITLE OFF
BTITLE OFF
set verify off
set feedback off
set echo off
set heading off
set termout off
set linesize 203
set pagesize 30
set termout on
SET UNDERLINE =
set heading on
COLUMN SALARY FORMAT 9,999,990 Heading 'SALARY'
COLUMN ON_SALARY format 9,999,990 Heading 'ON Salary'
column ENAME format a20 heading 'NAME'
COLUMN EMPNO Format 99999 HEADING 'EMPNO'
BREAK on REPORT skip 3;
--compute SUM label 'Total $S: ' of SALARY ON_SALARY on report;
compute SUM label 'Total $S: ' of SALARY on report;
WHENEVER SQLERROR EXIT FAILURE
select empno, ename, sal SALARY, sal ON_SALARY from scott.emp; -
Stop() does not work, action script from 2.0 to 3.0
Hi everybody, some years ago I have created a website in Flash with Actionscript 2.0
Now the customer want to change something in the text and I stumble upon the action script 2.0 has become 3.0
This means that my stop() (I have kind of menu on the left that should display afterwards from frame 5-10 for instance)
Now my swf works when I execute it locally but when online it just goes on and on ....
anyone an idea ? I am getting crazy ...
Thanks in advance !
the site can be looked at www.kitwerken.be/index.php
and the concerned part is "Over ons"I don't think the actionscript could have changed itself. If you are using Flash CC then the problem is that Flash CC does not support AS2, so it took your file and changed it to AS3. You will need to get your hands on an older version of Flash (CS6 or earlier) to edit the file and keep it as an AS2 file.
-
(SOLVED) Pacman error: GPGME does not exist
Hi, I have also just been struck with the same issue - a broken pacman (and for no reason that I can fathom). Was working perfectly yesterday and all I did that wan't usual was to uninstall clamav.
Anyway, I have read this post and done a pacman -Syy, which upgraded core and archlinuxfr only. I then ran pacman -Syu and received this:
[grant@ARCH ~]$ sudo pacman -Syy
[sudo] password for grant:
error: GPGME error: No data
error: GPGME error: No data
error: GPGME error: No data
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
core 106.2 KiB 353K/s 00:00 [######################] 100%
error: GPGME error: No data
error: failed to update extra (invalid or corrupted database (PGP signature))
error: GPGME error: No data
error: failed to update community (invalid or corrupted database (PGP signature))
error: GPGME error: No data
error: failed to update multilib (invalid or corrupted database (PGP signature))
archlinuxfr 30.3 KiB 81.9K/s 00:00 [######################] 100%
error: database 'extra' is not valid (invalid or corrupted database (PGP signature))
error: database 'community' is not valid (invalid or corrupted database (PGP signature))
error: database 'multilib' is not valid (invalid or corrupted database (PGP signature))
[grant@ARCH ~]$
Should I do a reinstall of pacman using the CD? I know this is clumsy, but anything I have missed?
Last edited by mcduling (2012-12-03 06:43:56)Here is my pacman.conf in separate screens:
GNU nano 2.2.6 File: /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
GNU nano 2.2.6 File: /etc/pacman.conf
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
GNU nano 2.2.6 File: /etc/pacman.conf
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
GNU nano 2.2.6 File: /etc/pacman.conf
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
GNU nano 2.2.6 File: /etc/pacman.conf
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
GNU nano 2.2.6 File: /etc/pacman.conf
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[multilib]
#SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/$arch
# An example of a custom package repository. See the pacman manpage for
GNU nano 2.2.6 File: /etc/pacman.conf
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs -
[SOLVED] pacman -S chromium is not working [SOL = update Arch]
Hello, I'm trying to download Chromium but I get the following error:
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD (1) /archlinux/extra/os/x86_64 ... done.
==> SIZE chromium-6.0.472.62-1-x86_64.pkg.tar.xz ... done.
==> PASV ... done. ==> RETR chromium-6.0.472.62-1-x86_64.pkg.tar.xz ...
No such file "chromium-6.0.472.62-1-x86_64.pkg.tar.xz"
Any help?
Last edited by gromlok (2010-11-04 03:41:25)Thank you. Worked.
-
[SOLVED] Ctrl-Alt-F1 does not work from KDM login screen
I have some weird problems with switching to the virtual console from the graphical GUI.
rc.conf: KEYMAP=hu
Unless I define hungarian keyboard in KDE4 also, I cannot switch to vc/1 with Ctrl-Alt-F1. When the keyboard is defined in KDE4, i can switch.
But in the KDM login screen, I am unable to switch and there is no option to set the keyboard.
Any ideas please?
Last edited by SanskritFritz (2009-02-28 19:08:24)Option "XkbLayout" "en"
Hey, you got the point, this was the solution! Setting the option to "hu" solved my problem! Thank you! -
[SOLVED] gtk-qt-engine does not work
I basically no long use GNOME but I do use a few GTK apps such as Pidgin and Firefox (thats GTK right?). Anyways they look like total crap in KDE and I'd rather not start gnome-theme-manager everyday just to theme them right.
I installed gtk-qt-engine in the hopes that it would theme my GTK apps to look like my KDE theme ...
http://img164.imageshack.us/img164/1340 … 68sju0.png
As you can see there, I have it enabled (I think), but Pidgin in the background is not themed like it should be o_O.
Any ideas?
Thanks.
Last edited by A.I. BOT (2007-07-10 18:40:07)gtk-qt-engine is a bit broken, at least that is how it feels. A workaround for your problem is set in kde control center a gtk style for your gtk apps (same place where you tell to use gtk-qt-engine). After this, start a gtk application, it has a normal gtk style now. Close the gtk app, go back to control center and choose use qt theme for gtk apps at that place (dunno how it is exactly called, I'm not in kde atm). Now it should apply your qt theme to gtk apps.
-
[SOLVED] xhost access control does not work for specified users
After last upgrade of xorg to v1.17.1-1 I get message: "unable to open display ":0" " when trying to run any window application as user specified in xhost. My xhost list looks like:
access control enabled, only authorized clients can connect
SI:localuser:steam
SI:localuser:root
But if I disable access control for everyone by invoking "xhost +" applications run on another accounts without problems. Does anyone has that problem too?
Last edited by slx (2015-02-22 12:24:17)slx wrote:I see that fix is pending http://lists.x.org/archives/xorg-devel/ … 45644.html
Can you test package here http://pkgbuild.com/~lcarlier/test/ ? -
Workflow does not work from Script Menu or as Application
Hi,
I create a really simple script to adjust podcast volume...
1. Get Specified iTunes Items (Recently added podcast – my smart folders of recently downloaded items)
2. Filter Songs in iTunes (Volume Adjustment is 0: so the workflow will not touch podcasts already adjusted.)
3. Set Options of iTunes Songs (Volume Adjustment: 80)
The workflow works find when running from Automator. But when I save it as script plug-in or application and try to run it, nothing happens. Please help. Thanks.
P.S. I tried to create folder action script that adjust the volume automatically when a podcast is downloaded (get selected items -> set options in iTunes songs). At first it works. Now it doesn't.It starts by pausing iTunes, executes a applescript where there are say commands, pauses for 3 seconds, gets info from ical, filters out todays events, speaks these events out loud, fetches a weather report via web(xml), speaks out loud, pauses a couple of seconds, gets current itunes song, resumes playing of this song and the workflow is finished.
It quits right before it is about to announce todays events. Doesnt matter if there are events for today or not. If I start the application manually however, everything seems fine.
The Applescript used to launch the program:
tell application "TodaysiCal"
run
end tell
Any suggestions now ? -
Key fn + Backspace does not work with apple wireless keyboard
Hello,
I want to user the WIndows Key DEL. However, the apple wireless keyboard dosn't have such a key. I read, that FN + Backspace will solve this. It does not work on my apple wireless keyboard. I'm using BootCamp 3.2 and WIndows XP, running on a Mac Mini 2010.
In addition, I also read, that FN + Cursor Left sould work like POS1. But this doesn't work, too.
Windows shows for the keyboard: Deutsch (Apple)
Regards DirkHi mate,
This worked for me:
http://code.google.com/p/uawks/
Cheers,
Anthony
Maybe you are looking for
-
Homesite 5 User Looking At Dreamweaver
I am considering buying Dreamweaver and getting with that program after years of hard coding in Homesite 5.Most of what I do is HTML with some PHP. I use code for my website, made up in Zen Cart. I have Photoshop, Elements, Illustrator...all the usua
-
How do i display an sql SELECT query in a jtextarea?
Hi, I have a program that takes any SQL string from an inputArea JtextArea and displays "command executed successfuly" in the outputArea JTextArea if it works. My question is how do i make the outputArea display the actual query of the SELECT statmen
-
Account assignment objects are incorrect. No substitution is possible
Account assignment objects are incorrect. No substitution is possible. Message no. 3G209 Diagnosis The account assignment object check showed that, from the point of view of CO, the specified account assignment is not valid, and cannot be replaced by
-
To add value in LOV for Attachment Catorgy
Dear ALL I want to add value in lov in catagory Discription ..( When we click on Attachment Icon , there is a column CATAGORY.. in that i would like to add a value ... how can i do it .. please help... Thanx in advance.. Edited by: 790113 on May 25,
-
Clean install with nVidia 8800GT issue
I know that you either need a legacy graphics card or a 10.5.2+ installation DVD/CD to be able to do a clean install. There is a number of workarounds also and I used one of them. I restarted my MacPro in TARGET DISK MODE and connected it via FireWir