[SOLVED] PCManFM file manager not working for me

Hi, i'm having some troubles with PCManFM. Every time i want to open the file manager it just doesn't do anything, no errors and no feedback if i run it from a console. If i create a folder on my desktop and double click on it, file manager will pop up and i'm able to use it as it were no problems, but still when i close that window it won't open otherwise than clicking on the folder on the desktop. Any ideas?. It's a clean install, followed the wiki for lxde and i've been using linux for 10 years now, tried to figure it out but i couldn't. It's not my first time with arch but i took a break for the last 6 months, thanks in advance.
ibfm 0.1.14-2 (lxde)
pcmanfm 0.9.8-2 (lxde)
cat /etc/rc.conf | grep DAEMONS
# DAEMONS
DAEMONS=(syslog-ng dbus hal !network networkmanager dnsmasqd !netfs crond alsa)
cat .xinitrc | grep exec
exec ck-launch-session startlxde
As i said before, there are no error messages.
Update:
I've just found a lead (l think), if i kill pcmanfm process and rerun it the file manager works fine, the way it should, but desktop won't get managed.
Last edited by oTarUX (2011-01-08 10:00:18)

Please report or confirm this on the PCManFM bugtracker: http://sourceforge.net/tracker/?group_i … tid=801864

Similar Messages

Hp file manager not working

after updating hp slate 7voice tab from jellybean to kitkat the hp file manager not working.

Hello, and Welcome to the HP Support Community!
This is not HP's fault - this change was caused by Google.
Perhaps this article can help explain how Google changed Android KitKat 4.4:
KitKat and SD cards — what's fixed, what's broken and what's misunderstood.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

Pc Suite: File Manager not working

I can't access file systems on my E50 using PC Suite's file manager, neither via Bluetooth nor via cable.
The message is something like "Can not connect to mobile phone" (Original German message: 'Verbinden zum Telefon nicht möglich'). When I tried the Video Manager I got something like 'Error while reading the file system of your mobile phone" (German message: 'Fehler beim Lesen des Dateisystems des Telefons').
Local access to file systems on the phone works fine. Resetting the whole phone, reformatting the SD card, and
updating PC Suite Support on the phone didn't solve the problem.
When I first got my E50 and had PC Suite 6.x, everything worked fine.
Win XP SP3 (Microsoft Bluetooth stack), PC Suite 7.1.18.0 German, Nokia E50 (latest firmware)
Any ideas?
Torsten

When it was working, I would open up windows explorer, browse to the Inbox folder under messages under Phone Browser, select all the messages and just drag and drop to c drive on my PC. then I would delete the messages using my phone. I am using IrDA to connect my 6233 to my PC. It has worked before, I have saved 100s of messages in this manner. I upgraded to the latest PC Suite, it worked once (because the name of the messages saved included the first few words of the message itself), i deleted the messages from my phone, when i reconnected the old messages still appear under pc suite, but these are not on my phone. i deleted the messages under pc suite and now can no longer view the messages on my phone. i am able to browse images and the memory card and phone memory but when selecting the Messages Inbox under PC Suite it always errors with the infamous 'Operation could not be performed' Thanks for your help!

File sharing not working for any new accounts

I am using the latest version of Mavericks. For every new account I set up (Sharing, Administrative, Standard) trying to set up file sharing on a directory fails. When I set up the account, select a directory (on the boot drive or on an external drive) to share and do a get Info it always shows "Fetching..." on the new account. If I try to set that directory to share from an account in SysPref>Sharing when I click on the directory and try to set the account to share, even though the account shows up in the list of accounts to use, when I select any new account it does NOT show up as selected for sharing. It is as though the new account isn't quite being correctly set by the system. If I launch and look at any new account in WorkGroup manager they appear to be normal but cannot be used in File Sharing. I am really scratching my head on this, since I do everything I should to share a directory and all new accounts are just not working.
Any ideas or suggestions??????????????? HELP HELP!

hi there,
that error message sounds like you placed a shared folder within a parent folder that is not shared. It also can help to boot into Recovery Mode (pressing Command and R simultanously when hearing the startup tune), launch Disk Utility, select the disk containing your OSX installation (usually named Macintosh HD) and choose Verify Disk Permissions. Should any problems be reported select Repair Disk Permissions. Once that is finished, reboot normally.
Though unlikely, it might have happened during all the folder removing and readding that some Permissions are out of sync. So checking these Permissions is merely a precaution
Once you are back in "normal" OSX using your admin account, try this:
Open Terminal from the Utilites folder
enter the following commands one line at a time:
mkdir /Users/Shared/Family
mkdir /Users/Shared/Family/Movies
mkdir /Users/Shared/Family/Mom
chown -R <placeholder> /Users/Shared/Family
chmod -R 755 /Users/Shared/Family
Be sure to replace <placeholder> with your account's short name (no brackets!)
Now open System Preferences and select Sharing
Select File Sharing from the left pane
Click on the little plus and add /Users/Shared/Family to your shares (The subfolders are automatically included)
in the right most pane check the access privileges. They are set, so that you can read and write to those folders, while everyone else can only read. If you want everybody to have read and write privileges, use 777 instead of 755 within the terminal last command.
Now the other computers should be able to see and use the shared folder you just created.
If you create individual user accounts on your machine for every family member you want to access the shared folders, you can choose far more sophisticated levels of access privileges.
Hope this helps,
Chris

Web File manager not working

The web file manager in NSS322 does not work correctly. The admin button doesnt work. I get some limited use when I click compatibility view but not ideal

Kriss,
Please call into SBSC @ 1-8866-606-1866 and speak with next available engineer on this issue.
Thanks
Jasbryan

File.execute() not working for bat file

Dear all,
The purpose of my function copyToWinClipboard (text) is to get a string directly into the Windows Clipboard. The purpose is to allow the user of my project just to paste into the open-dialog of the application EndNote. I’m not certain whether the FM clipboard (supported by the copy/cut/paste methods for Doc) really fills into the Windows Clipboard also.
In the PhotoShop script forum I found the idea how to do this.
#target framemaker
// note the blank in the path
copyToWinClipboard ("E:\\_DDDprojects\\FM+EN escript\\FM-11-testfiles\\BibFM-collected.rtf");
function copyToWinClipboard (text) {
var theCmd, clipFile = new File(Folder.temp + "\\ClipBoardW.bat");
clipFile.open('w');
// theCmd = "echo \"" + text + "\" | clip"; // this doesn’t help either
theCmd = "echo " + text + " | clip";
clipFile.writeln (theCmd);
clipFile.close ();
clipFile.execute ();
Running this script provides a short flicker (the command prompt), but the clipboard does not contain the expected string. However, when double clicking on the generated I:\!_temp\ClipBoardW.bat the clipboard is filled correctly.
IMHO the execute method does not work correctly for bat files. In another area of my project-script i run an exe file with this method correctly.

Hi Klaus,
sorry for my late response.
execute definitely works witch batch-files
Here's a "batch" - example you can test.
There are two methods to prevent window from closing:
"|more" - kind of pagebreak
"pause"
var oTemp = app.UserSettingsDir + "\\tmp";
    var MyDosCommand = "ipconfig.exe /a|more";
    var MyPath = new Folder (oTemp);
    if (!oTemp.exists)
        var MyPath = new Folder (oTemp);
        var lFehler = MyPath.create();
    oTemp = oTemp + "\\" +"nw.bat";
    var MyFile = new File (oTemp);
         MyFile.open ('w');
           if (MyFile.error > "")
                alert("ERROR");
        MyFile.writeln(MyDosCommand);
        MyFile.writeln("pause");
        MyFile.close();
        MyFile.execute();

Blackberry Media Manager NOT working for Blackberry storm (wont install on computer)

Hello 2months ago I got a Blackberry storm. Its a good phone but I have one problem that would make it much better. When I try installing the desktop manager, everything installs besides the Roxio Media manager. It gives me an error and cancels the installation of Roxio and continues with the other stuff. I really want to transfer Photos and Videos from my phone to my computer and vice-versa. Please tell me what I can do to install the Media Manager to get the device working. I am not using the CD's to install, i downloaded it from the blackberry website. The english version WITH media manager, and I even clicked Custom install and made sure it was planning to install it.
My error is this:
Error 1402.Could not find key:
UNKNOWN/ComCtl3.CoolBar/CLSID
Verify you have sufficient access to the key , or contact your support personelle.
What does that mean I have to do?
Solved!
Go to Solution.

Hi and Welcome to the Forums!
You don't need Roxio nor Media Manager to transfer files to/from your BB. Follow these instructions and be sure to download the version of Desktop Manager that is without either of those...
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
With that, you'll be able to have 2 additional drive letters on your Windows PC and you can drag-and-drop just like any other drive on your machine. Slick.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mac to Mac file sharing not working for new folders

My folks got a new iMac today, and I've got a 2007 iMac on the same network. We're both running 10.8.2.
I had a few folders set up to share files. My public folder, Movies, and then a new fold called "Mom" that I set up specifically for them. The settings are identical on all the folders, but they can only access "Movies." If I try to access any other shared folders from their machine, I get the following error:
"The operation cannot be completed because the original item for "[insert folder name]" cannot be found."
I have read the Mac 101: File Sharing document (http://support.apple.com/kb/HT1549?viewlocale=en_US) and followed the directions to no avail. I have removed and re-added all the folders, and still, only "Movies" is readable from their iMac (it too was removed and re-added). The settings for all the folders are identical to the settings for "Movies."
Additionally, after a short period any new folder I create and use as a shared folder will no longer allow me to rename it, even after I remove it from the shared folders list. The folders are not locked, and I have full admin privileges.
(Things work fine the other way, though: I can set up shared folders on their new iMac and access them just fine from my 2007 iMac.)

hi there,
that error message sounds like you placed a shared folder within a parent folder that is not shared. It also can help to boot into Recovery Mode (pressing Command and R simultanously when hearing the startup tune), launch Disk Utility, select the disk containing your OSX installation (usually named Macintosh HD) and choose Verify Disk Permissions. Should any problems be reported select Repair Disk Permissions. Once that is finished, reboot normally.
Though unlikely, it might have happened during all the folder removing and readding that some Permissions are out of sync. So checking these Permissions is merely a precaution
Once you are back in "normal" OSX using your admin account, try this:
Open Terminal from the Utilites folder
enter the following commands one line at a time:
mkdir /Users/Shared/Family
mkdir /Users/Shared/Family/Movies
mkdir /Users/Shared/Family/Mom
chown -R <placeholder> /Users/Shared/Family
chmod -R 755 /Users/Shared/Family
Be sure to replace <placeholder> with your account's short name (no brackets!)
Now open System Preferences and select Sharing
Select File Sharing from the left pane
Click on the little plus and add /Users/Shared/Family to your shares (The subfolders are automatically included)
in the right most pane check the access privileges. They are set, so that you can read and write to those folders, while everyone else can only read. If you want everybody to have read and write privileges, use 777 instead of 755 within the terminal last command.
Now the other computers should be able to see and use the shared folder you just created.
If you create individual user accounts on your machine for every family member you want to access the shared folders, you can choose far more sophisticated levels of access privileges.
Hope this helps,
Chris

File Download not working for anchor tags

Hello,
I've encountered a bug with the 4.1.31 version of Tomcat. Apparently, when
I use an anchor tag for a file, and I click on the link, it does not show the
file download message "Do you want to open or save this file?" with the open
and save options. Instead, it displays the file in the browser. I know you
could normally save this information from the browser to a file, but I need it
to show the download message because it's easier for users to save their
file. I'm using Internet Explorer version 6, SP2. I've also tried setting
the "Confirm open after download" check box for file types to no avail. It
use to work in Tomcat 4.1.18.
Any help would be appreciated.

Can anyone pls. help me ? I tried all options from disbling firewall to uninstalling Bonjour.. But nothing works. Had I known that Apple makes such worst software I would never have bought iPhone !!!! Apple really *****!!!!!!!

FlashPlayerTrust file is not working for firefox

Hi guys,
there are two methods of putting your swf under the localTrusted.
1. add your location to local trusted by setting in to online setting manager on macromedia site.
2. create a cfg file and put it in flash player trust directory i.e "C:\WINDOWS\system32\Macromed\Flash\FlashPlayerTrust".
Am i right?
now my application works fine in IE by doing so but it irritate me on firefox.
if i add my swf file location in online setting manager on macromedia site then it start working but cfg file doesnt leave any effect.
really i need to achieve this by cfg file not by adding some setting in online setting manager .
any solution, suggestion??
Thanks
Shubham Goyal

worked! :)

Computer Management not working for 10.4.x clients

I am testing a configuration in which the Macs receive login information from Active Directory. But the computer account preferences are managed by an Xserve running 10.5.2. This works out great for the Leopard clients. However the Tiger machines simply ignore all preferences set in Workgroup Manager.
Does anyone have any ideas as to what I'm doing wrong?
Thanks

bump!
david, i have the exact same problem you mentioned, a 10.5.x server trying to manage 10.4.x clients and not having any effect.... did you manage to sort it out in the end?

[Solved] The "¨^~"-key does not work for me in URxvt in Awesome

Hello.
I can not understand why I can not write e.g. ^ or ~ using the "^¨~"-key on my keyboard (norwegean layout) in URxvt (extra/rxvt-unicode) in Awesome WM (aur/awesome-git).
Although I have tested in other window managers e.g. dwm, and the key works fine in urxvt there, I am not yet sure whether this is a problem in URxvt or Awesome. When I started using Awesome and URxvt some years ago, this was not an issue yet.
I hope someone has a clue as to what is causing this, and/or how it can be fixed.
Regards,
Rasmus
Edit: added [Solved] tag
Last edited by rusma (2011-08-23 17:30:28)

MaikB wrote:
When I first fired up awesome almost a year ago I needed to add
awful.util.spawn_with_shell("setxkbmap -layout de -variant nodeadkeys")
to my rc.lua to make my german keyboard work. While I'm not sure if your current and my past issue are related, I decided to post since setxkbmap wasn't mentioned yet ( In this thread and in the one karol linked to).
Thanks.
I added
awful.util.spawn_with_shell("setxkbmap -layout no -variant nodeadkeys")
at the end of my local rc.lua, and now it works. Yay!

[SOLVED] SWF files are not working in Firefox 5.0.1. When visiting websites with 'zoom' on photos Forefox asks how to handle rather than just going to zoom

On previous versions of Firefox I was able to use the 'zoom' feature on photos at retail websites. This no longer works. (You can go to Territory Ahead as an example). Firefox asks what to do with the SWF file. There is no option to use Shockwave (I think this is a Shockwave file). Thanks for your help. Warren

Ooops. Never mind. I recently upgraded other programs and I no longer had the Shockwave player installed in my system. Reinstalled it and all if well.

Credit Management not working for Third Party Sale

Hi Experts,
We have a scenario of Third party sale where sales order generate purchase requision after saving. Now we have appled static credit check to the customer, at the time of saving sales document it warns credit limit is over same time it doesn't allow to save, displaying incompletion log - " Subsequent function 'Purchase requisition from sales document' not possible due to a credit block".
Pl. suggest us, since it is third party sale no delivery is available, so we cann't apply credit check at the time of delivery also.So what would be the solution.
Kindly help.
Thanks
Prashant Ray

Hi Prashant,
Check in FD32 what is the credit limit and try to do the cahnges there if required.
Also you can relase the SO through VKM3 / 2 /4.This will allow you to releasea nd the save the SO.
Hope it helps
Regards
Rohit.

[SOLVED] PCManFM file manager not working for me

Similar Messages

Maybe you are looking for