[Solved] pcmanfm launches at desktop start regardless....

On new login or desktop restart (lxde) pcmanfm is launching although I do NOT have pcmanfm set to launch in neither my .xinitrc file nor in my ~/.config/autostart file. Any ideas on how to stop this behaviour?
Last edited by lagagnon (2010-10-08 03:15:45)

Have you checked all methods from http://wiki.archlinux.org/index.php/LXD … t_Programs ?
Create another user and see if it happens for the new account too.
Last edited by karol (2010-10-07 23:30:18)

Similar Messages

I get an appcrash message when I try to launch the desktop software

(personal info removed)

Hey terrapin7,
Can you please verify that the BlackBerry Desktop Software is installed in a user account with admin privileges? Here is a KB article that may help you out with this issue. "BlackBerry Desktop Software has stopped working. A problem caused the program to stop working." appears when launching BlackBerry Desktop Software" http://bbry.lv/ZZWKYn
If that doesn't help, I'd suggest contacting your wireless network provider to ask that they escalate this issue to RIM on your behalf for further investigation.
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Solaris 10 X86 and disabling the desktop start up?

I want to disable desktop start up and use command line interface? How do I can do this? My Solaris 10 x86 is installed on virtual PC and the desktop (or x) uses a lot of resources and I don�t need it.

the only thing that worked for me was:
svcadm disable svc:/application/graphical-login/cde-login:default
I had been using CDE last. The suggestion to /usr/dt/bin/dtlogin -d did not keep the graphical login from happening (that's suggested in the official online docs), and "dtlogin" is not recognized as a service by svcadm so that doesn't work either. Finally, very few services are started by /etc/*.d/ any more, of the remaining scripts in /etc/rc2.d S99dtlogin is not among them. So do the above with newer releases, mine is u3.
Incidentally, didn't "init -r" used to reveal the run level? Hmm... been a while since using Solaris but I still consider myself a Solaris person. So much is changing... hope it's finally faster and comes with a compiler. Really, it's that simple. Oh and getting over Linux to realize that Solaris is Solaris (in case that needs translation for Sun decision makers - that means Solaris is already better than Linux with the aforesaid improvements). Sorry, very off-topic but I won't post anything for another several years ;-)

When i zoom pic then coming some Black or wight boxes in image or when zoom agin they it will come in ohere side in picture pls solv this problom. this problom start when i update photoshop cc 2014

When i zoom pic then coming some Black or wight boxes in image or when zoom agin they it will come in ohere side in picture pls solv this problom. this problom start when i update photoshop cc 2014

in mac command-k
preferences/interface/Workspace/Reset
or in windows control-k
preferences/interface/Workspace/Reset

Hi my desktop starts and then shuts down after the apple logo and an oblong box appear.thanks

hi my mac
desktop starts then shuts down after displaying the apple logo and an oblong box.
thanks

Sounds like something is badly wrong with your system. First step would be to start up from your Mac OS X install disk, by inserting the disk and holding down 'c' at startup. Select your language, then choose Disk Utility from the Utilities menu. In Disk Utility, choose your hard drive and click the Repair Disk button.
If problems are repaired, try restarting and see if the problems are gone.
If problems couldn't be repaired, you can try DiskWarrior, which can sometimes repair problems that Disk Utility cannot. However, if nothing works, you probably are going to have to erase the hard drive and reinstall the system from scratch. Hopefully you have backups!
If there were no errors, or they were repaired successfully but that didn't fix the problem, then you should try booting into safe mode by holding down the shift key at startup. If that works, you may have some bad third-party software. What that might be is hard to say, though.
If nothing works, try rebooting from the Mac OS X install disk again and install Snow Leopard right on top of your current system. That shouldn't disturb your apps or data, but of course, if you don't have backups, you're in trouble if something goes wrong.

Launching an Web Start gives me error message(s), 1 for every .jnlp..

Hei!
- MICROSOFT JSCRIPT COMPILATION ERROR -
/ ! \ Expected ' ) ';
| OK |
I get this strange JScript error dialog everytime when i go launching an Web Start application from my PC XP PRO SP2 JRE6u1..
i have reinstalled Java several times and reinstalling wont help..
this error message dialog is getting a bit annoying and i really want to remove it from my .jnlp web starts..
my knowledge of computers and java is not strong enough to help me carry why running an .jnlp file causes an JScript error..
thank you, for helping me..
JariTapio / Helsinki

When Java Web Start starts up, it tries to determine the Proxy Settings from either the users deployment.properties file, or from the browser (if the deployment.properties setting is set to the default "Use Browser Settings"
In either case the setting can be to use an automatic proxy configuration script. If it is, Java Web Start will invoke the MS java script engine to parse the config script.
This sounds like an error message from there.
To fix this, you could use the Java Control Panel to set the proxy directly, or change the setting in the browser.
In versions before 1.5.0, Java Web Start would always go to the IE system settings for proxy. In JDK 6, javaWeb Start will read the proxy settings from the "default browser". If this is Firefox, it may return different settings than are set in IE (the default system proxy settings).
/Andy

When i move my computer screen, the desktop start to jump as if the connections are being shorted

when i move my computer screen, the desktop start to jump as if the connections are being shorted

Maybe the are shorted by a faulty display cable? Do you see the same error on an external attached Monitor/TV/Beamer?

How to solve this error JBoss Server start time............

How to solve this error JBoss Server start time............
10:45:38,484 INFO [TomcatDeployer] deploy, ctxPath=/JobWorkInvoice, warUrl=.../deploy/JobWorkInvoice.war/
10:45:38,640 ERROR [STDERR] log4j:ERROR A "org.jboss.logging.util.OnlyOnceErrorHandler" object is not assignable to a "org.apache.log4j.spi.ErrorHandler" variable.
10:45:38,640 ERROR [STDERR] log4j:ERROR The class "org.apache.log4j.spi.ErrorHandler" was loaded by
10:45:38,640 ERROR [STDERR] log4j:ERROR [WebappClassLoader
delegate: false
repositories:
/WEB-INF/classes/
----------> Parent Classloader:
java.net.FactoryURLClassLoader@d5f9b9
] whereas object of type
10:45:38,640 ERROR [STDERR] log4j:ERROR "org.jboss.logging.util.OnlyOnceErrorHandler" was loaded by [org.jboss.system.server.NoAnnotationURLClassLoader@5d173].
10:45:38,687 ERROR [STDERR] log4j:ERROR Could not create an Appender. Reported error follows.
10:45:38,687 ERROR [STDERR] java.lang.ClassCastException: org.jboss.logging.appender.DailyRollingFileAppender
10:45:38,687 ERROR [STDERR] at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:174)
10:45:38,687 ERROR [STDERR] at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:149)
10:45:38,687 ERROR [STDERR] at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:162)
10:45:38,687 ERROR [STDERR] at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:424)

The error message suggests that your system is running out of memory. How much memory is available for OC4J on this box?
You may also see problems like these when any of the following Jar files in your classpath :
<li>$OH/jlib/repository.jar
<li>$OH/j2ee/home/jazn.jar
<li>$OH/j2ee/home/oc4j.jar
<li>$OH/j2ee/home/jazncore.jar
<li>$OH/jlib/infratool.jar
Thanks,
EJ

Studio creator 2 launch from desktop

I wanted to fine out if java have a download that has drag-an-drop component to create applications that can be deployed from sun systems? I know studio creator 2 has a drag-an-drop component feature for web application, if I create a application using studio creatior2 can it be launch from the sun system?

Maybe I didn't quite answer your question. What do you mean by "launch from desktop"? You can run Java Studio Creator applications on your local desktop machine by running them in the Sun Java System Application Server 8.x Platform Edition that's bundled with Creator for development and testing, but they are web applications running inside the J2EE container and do not have complete access to files on your local desktop machine.
You can use Java Studio Enterprise or the new NetBeans Enterprise Pack 5.5 Beta to create server side EJBs and Web Services that have complete access to server side files. If you want a simple desktop application that has complete access, use NetBeans with its new the intuitive GUI builder Matisse.

Quick Launch and Desktop Shortcuts

Every time I upgrade Safari it installs new quick launch and desktop shortcuts - why?
Can this avoided... Obsolete ones stop working, new ones link to exactly the same place (often) and really Apple should be asking if we 'want' these short cuts in the first place... it a pain to keep deleting and swapping them about just because Apple decide to upgrade.
I have no other software that does this.
Does anyone have a work around?

The LabVIEW installer itself cannot create shortcuts on the desktop or remove older versions of itself. You can create an executable to create shortcuts and have your installer launch that executable. But for more complicated things like uninstalling previous versions, you might want to look into a third party installer like Wise or InstallShield.
LabVIEW 6.1 does not really have any installer features that 6.0 did not. 6.1 does use an MSI installer instead of the previously used Wise installer. Theoretically, one might be able to use a utility like Orca from Microsoft to customize the MSI installer, but editing MSI files will not be supported by National Instruments.

Itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing it

itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing that.

See if a device is attached and "open iTunes when iPod is connected" is selected. https://discussions.apple.com/message/16483979#16483979
Check for other iTunes preference settings that might cause this.
Hacks to stop Bluetooth speaker from starting iTunes -
http://forums.macrumors.com/showpost.php?p=19045335&postcount=4
LincDavis June 2014 post - https://discussions.apple.com/message/25998941

Smart Center launches window on start-up of ToushSmart 300

I've noticed that the Smart Center ("C:\Program Files (x86)\Hewlett-Packard\TouchSmart\SmartCenter 2.0\SmartCenter.exe" chromeless) launches on every few start-ups. Whereas the Dock has options to choose whether or not it launches at start-up, I can't seem to find any for the Smart Center. I dragged all the programs (Canvas, Hulu, etc.) to the bottom, which according to the videos means they're not running, but the Smart Center continues to launch at periodic start-ups. I do know how to stop it via MSCONFIG but before I do I thought I'd ask for other options? The only reason it concerns me is because it adds to start-up time when I'm wanting to do keyboard work.
(Have searched help files, solutions and tips & tricks w/nothing found.)

Unless you know of a specific log entry, I would hold off posting more that most can't decipher.
I understand that, but without knowing which specific bit of the log entry is relevant, it's hard to make that call. I'd hoped that by posting the whole thing someone could point me in a specific direction.
Most of the time it is a matter of trial and error and removing 3rd party devices, cables, and looking at 3rd party background processes, driver extensions, apps, haxies, and such.
The problem I have doesn't repeat itself after I've replaced the HD with my backup SD clone. Yet the SD clone was updated a week after this happened the first time, when I was sure that everything was working fine. It was then updated a couple of times after that, and 2 months must have gone by when it happened again yesterday, causing me to have to restore. So working on the principle of removing stuff in order to test whether its them, when they all seem to work fine for weeks, seems unlikely to be fruitful, as much as I'd like to know what it is.
You may need to reapply the combo update for 10.5.4, or do an archive and install.
I'd already performed the former. I guess an A & I can't hurt.

FF launches twice on start-up

Recently FF launches twice on start-up.
The second is with a BING page.
My start-up folder only has one FF in it. How do I stop this.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can open the about:config page via the location bar and search for prefs that refer to TEXT and reset related user set (bold) prefs via the right-click context menu to the default value.

Conky disappers when Gnome-Desktop starts

Hi there,
I've installed conky as a systemmonitor and would like to let it start when my Gnome-Desktop starts. To achieve this, I put the "conky"-command under System -> Preferences -> Session. In principle this works, because when Gnome starts, I can see that conky is startet, too.
But when Gnome starts Metacity, conky ist shifted to the background (or whatever). With "top" I can see, that it's still running, but I can't see it anymore.
Does anyone know, how I can start conky automatically when Gnome starts up?
If you're interested or may it helps - here is my .conkyrc:
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# fiddle with window
use_spacer yes
use_xft yes
# Update interval in seconds
update_interval 3.0
# Minimum size of text area
# minimum_size 250 5
# Draw shades?
draw_shades no
# Text stuff
draw_outline no # amplifies text if yes
draw_borders no
xftfont Arial:size=10
uppercase no # set to yes if you want all text to be in uppercase
# Stippled borders?
stippled_borders 3
# border margins
border_margin 9
# border width
border_width 10
# Default colors and also border colors, grey90 == #e5e5e5
default_color white
own_window_colour black
own_window_transparent yes
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x 10
gap_y 10
# stuff after 'TEXT' will be formatted on screen
TEXT
$color
${color orange}SYSTEM ${hr 2}$color
$nodename $sysname $kernel on $machine
${color orange}CPU ${hr 2}$color
${freq}MHz Load: ${loadavg} Temp: ${acpitemp}
$cpubar
${cpugraph 000000 ffffff}
NAME PID CPU% MEM%
${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color orange}MEMORY / DISK ${hr 2}$color
RAM: $memperc% ${membar 6}$color
Swap: $swapperc% ${swapbar 6}$color
Root: ${fs_free_perc /}% ${fs_bar 6 /}$color
home: ${fs_free_perc /home}% ${fs_bar 6 /home}$color
CDRom: ${fs_free_perc /mnt/cdrom}% ${fs_bar 6 /mnt/cdrom}
DVD: ${fs_free_perc /mnt/dvd}% ${fs_bar 6 /mnt/dvd}
${color orange}NETWORK (${addr eth0}) ${hr 2}$color
Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s
${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0
25,140 000000 00ff00}$color
Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0}
Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768
61000 count}${alignr}Total: ${tcp_portmon 1 65535 count}
${color orange}LOGGING ${hr 2}$color
${execi 30 tail -n3 /var/log/messages.log | fold -w50}
${color orange}FORTUNE ${hr 2}$color
${execi 120 fortune -s | fold -w50}

Gnome lays its desktop above the root-window in its own borderless window. But conky is drawn directly to the root-window so the Gnome Desktop is always on top of it. The only workaround is to configure conky to run it its own window or not start the gnome-desktop executable.

[SOLVED] GTK2 apps have wrong theme when launched from desktop entry.

So I'm setting up KDE and I want to use the QtCurve theme for all applications where possible. I have set (via kde-gtk-config) the GTK2 theme to QtCurve and it half works. GTK2 applications are using the QtCurve theme when they are launched via a command, but they are using what appears to be an ugly version of the Oxygen theme when launched from a .desktop file. I previously installed gtk-qt-engine from the AUR, but have since removed it along with it's files, and as I was using the Oxygen theme at the time, this appears to be what has caused the issue. Does anyone know what is causing this and how to fix it?
EDIT: Solved by removing ~/.themes folder (obviously only remove the KDE-QT theme if there are other themes in the folder).
Last edited by RibShark (2013-09-23 17:26:41)

Thanks, but lxappearance made things rather worse.
A friend of mine had told me to put "gtk-toolbar-style=GTK_TOOLBAR_ICONS" into settings.ini and my problem is solved now.

[Solved] pcmanfm launches at desktop start regardless....

Similar Messages

Maybe you are looking for