[Solved] PCMCIA gprs/edge and wvdial, don't work

Question

Hi all...
I have bought a pcmcia gprs/edge Lightspeed EDGE-100M, but don't work.
I load the modules pcmcia, pcmcia_core, rsrc_nonstatic, yenta_socket (I have found they whit hwdetect --show-pcmcia).
PCMCIA it comes recognized like ttyS0.
I run wvdial but I got "Modem not responding".
I have also added line "options usb_serial vendor=0x0279 product=0x950b" into /etc/modprobe.conf but I don't got any results.
Thanks
/etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/ttyS0
Baud = 230400
Init1 = ATZ
Init2 = ATQ0 V1 E1 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","ibox.tim.it"
Dial Command = ATDT
Phone = *99***1#
Username = no_user
Password = no_pwd
ISDN = 0
Modem Type = Analog Modem
/var/log/messages.log
Oct 1 03:14:58 bash-laptop pccard: PCMCIA card inserted into slot 0
Oct 1 03:14:58 bash-laptop pcmcia: registering new device pcmcia0.0
Oct 1 03:14:59 bash-laptop ttyS0: detected caps 00000700 should be 00000100
Oct 1 03:14:59 bash-laptop 0.0: ttyS0 at I/O 0x400 (irq = 3) is a 16C950/954
Oct 1 03:14:59 bash-laptop logger: /lib/udev/bluetooth_serial: setserial or hciattach not executable, cannot start /dev/tts/0
Last edited by ilpianista (2008-02-28 21:04:57)

Answer 1

I have resolved
http://www.deelab.org/bash/2007/10/07/p … -on-linux/
Last edited by ilpianista (2008-02-28 21:04:40)