[SOLVED] Printer not working after reboots

I recently built my won desktop running Arch. Every thing works fine except for printer. Printer is Brother MFC-290c. It is a Multinational printer (i.e Scanner and printer together).
Once I configure the printer it works fine until the next reboot. After reboot printer user/group changes to root:scanner.
# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root scanner 189, 513 Jun 9 07:17 /dev/bus/usb/005/002
So after every reboot I need to do "lsusb" to look for Bus and Device ID for the printer and change its owner/group to root:lp. After this step is performed Printer works fine until next reboot.
$ lsusb
Bus 005 Device 002: ID 04f9:01fd Brother Industries, Ltd
Bus 005 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
How can I make sure that whenever I plugin this printer its user and group is root:lp instead of root:scanner
Last edited by nik (2013-06-10 00:48:50)

SOLVED :D:D:D
Thanks Strike0. That was a push in right direction. After reading your reply, I decided to take a look at my udev rules. There was not one for my printer but there was one for the Scanner. I do not yet know how to read udev file, but sure enough it looked as if it was causing all problems . Renamed the rules file for the scanner to see if everything works fine in its absence. Rebooted, Printer and scanner are both working fine now.

Similar Messages

[SOLVED] Audio not working after system update

Hi all,
About 4 days ago, I installed Arch Linux (full systemd) with LXDE on a Dell Inspiron Mini netbook. Everything seemed to be OK until today, when I did pacman -Syu and then installed the SLiM login manager. After rebooting there was no audio. I am not sure if this happened because of the upgrade or because of SLiM. I am pretty new to systemd, so I could be missing something very obvious. I have tried many things so far, with no success:
1) I disabled SLiM and instead started X from the terminal at boot, and nothing happened.
2) I have removed my username from the 'audio' group, added it again, removed it, etc... No change.
3) I downgraded systemd, systemd-sysvcompat, and xine-lib (just in case) to their previous version and nothing happened.
4) I seem to be detecting the sound card correctly. If I run "aplay -l" as my normal, non-root user I get the same output as the root user:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
5) If I login with SLiM, my session seems to be setup correctly, as far as I can tell:
$ loginctl show-session $XDG_SESSION_ID
Id=1
Timestamp=Mon, 2012-10-29 00:38:35 EDT
TimestampMonotonic=14973592
DefaultControlGroup=name=systemd:/user/vrg/1
VTNr=7
Display=:0.0
Remote=no
RemoteUser=root
Service=slim
Leader=274
Audit=1
Type=x11
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=0
IdleSinceHintMonotonic=0
Name=vrg
6) I reinstalled pulseaudio, pulseaudio-alsa, alsa-plugins, and alsa-oss... Nothing.
7) I do not have the ~/.asoundrc file.
Here is a full list of the packages I upgraded:
[2012-10-28 11:19] Running 'pacman -Syy'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] Running 'pacman -Syu'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] starting full system upgrade
[2012-10-28 11:20] upgraded linux-api-headers (3.5.5-1 -> 3.6.3-1)
[2012-10-28 11:20] Generating locales...
[2012-10-28 11:20] en_US.UTF-8... done
[2012-10-28 11:20] Generation complete.
[2012-10-28 11:21] upgraded glibc (2.16.0-4 -> 2.16.0-5)
[2012-10-28 11:21] upgraded binutils (2.22-10 -> 2.23-1)
[2012-10-28 11:21] upgraded bison (2.6.2-1 -> 2.6.4-1)
[2012-10-28 11:21] upgraded coreutils (8.19-1 -> 8.20-1)
[2012-10-28 11:21] upgraded systemd (194-4 -> 195-2)
[2012-10-28 11:21] upgraded device-mapper (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded cryptsetup (1.5.0-2 -> 1.5.1-1)
[2012-10-28 11:21] installed nss-myhostname (0.3-3)
[2012-10-28 11:21] warning: /etc/shadow installed as /etc/shadow.pacnew
[2012-10-28 11:21] upgraded filesystem (2012.10-1 -> 2012.10-2)
[2012-10-28 11:21] upgraded firefox (16.0.1-1 -> 16.0.2-1)
[2012-10-28 11:21] upgraded gcc-libs (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded gcc (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded lirc-utils (1:0.9.0-32 -> 1:0.9.0-33)
[2012-10-28 11:21] upgraded lvm2 (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded mkinitcpio (0.10-1 -> 0.11.0-1)
[2012-10-28 11:21] upgraded syslinux (4.05-7 -> 4.06-1)
[2012-10-28 11:21] upgraded systemd-sysvcompat (194-4 -> 195-2)
[2012-10-28 11:21] upgraded xine-lib (1.2.2-2 -> 1.2.2-3)
More information:
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Oct 29 00:38 by-path
crw-rw----+ 1 root root 116, 5 Oct 29 00:38 controlC0
crw-rw----+ 1 root root 116, 4 Oct 29 00:38 hwC0D0
crw-rw----+ 1 root root 116, 3 Oct 29 00:38 pcmC0D0c
crw-rw----+ 1 root root 116, 2 Oct 29 01:53 pcmC0D0p
crw------- 1 root root 116, 1 Oct 29 00:38 seq
crw-rw----+ 1 root root 116, 33 Oct 29 00:38 timer
$ lsmod | grep '^snd' | column -t
snd_hda_codec_realtek 52245 1
snd_hda_intel 22256 1
snd_hda_codec 83677 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 61470 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5869 2 snd_pcm,snd_hda_intel
snd_timer 14902 1 snd_pcm
snd 44874 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
If I run 'fuser -v /dev/snd/*' I get nothing (blank) and if I run 'fuser -v /dev/dsp' I get file not found. I've also done 'amixer sset Master unmute' and 'speaker-test'. Everything seems OK, except that I can't hear anything!
Any help or suggestions that could point me in the right direction would be greatly appreciated.
Last edited by vrg (2012-10-29 07:25:36)

Thanks Rasi. Incidentally, I just solved the issue a few minutes ago and was about to post the answer, but yes, you are right... the device was muted. It's embarrassing, but it did not seem obvious to me that the device was muted... All the sliders seemed OK, with nice, green values between 50 and 100. Also, the LXDE volume control was unmuted with a value between 50% and 100%, and I ran the 'amixer sset Master unmute' command several times. Clearly, this command does not do the job.
What I was missing is nicely described in the PulseAudio troubleshooting:
If one experiences no audio output via any means while using ALSA, attempt to unmute the sound card. To do this, launch alsamixer and make sure each column has a green 00 under it (this can be toggled by pressing 'm')
I was not pressing 'm'... I know it's on the wiki, but this did not seem to be a PulseAudio issue, which was working perfectly yesterday and was not upgraded, so the PulseAudio troubleshooting was not the first place I looked for solutions. I wonder why the device got muted in the first place.
Thanks again for the help!

Canon S750 printer not working after upgrading to Leopard

Leopard is brilliant, and everything works after I upgraded from Tiger except... my Canon S750 printer gives error messages and fails to print. This is VERY annoying. I can't seem to find an S750 driver for OS X 10.5 on Canon's web site. So, what to do next? Just wait, and keep logging on to Canon's web site in the hope that, one day, the driver will be there? I can't find any official statement from Canon as to what they're up to. Are they currently working on drivers for Leopard? Do they have any projected "release dates"? Are they at all interested, or would they prefer to sell me another printer perhaps? Any information on what I should do now will be gratefully received. Thanks.

UPDATE... my S750 printer has suddenly started to print OK! This is rather bizarre, since I've not re-booted, haven't un-installed/re-installed the printer. End of topic!

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Printer not working after loading 8.1

Printer will not print,copy or fax does nothing but sit there . tryed uninstall & reinstall but will not load from the disk. How do I get the O system & drivers so my printer will work.

Hello,
Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Quick Print not working after upgrading to Reader XI on Citrix

Hi,
I've upgraded from Reader 9.2 to 11.0 on our Citrix farm.
After the upgrade the Quick Print function in Outlook 2010 is not working anymore for PDF files. (other files are working fine)
Also, the RightClick --> Print on PDF files in Windows Explorer gives an open-with prompt. (other files are working fine)
Even if I choose Adobe Reader and chech the box "Always use the selected program to open this kind of file", the open-with prompt re-appears the next time I rightclick and choose print.
If I DoubleClick PDF files in Windows Explorer or in Outlook e-mail attachments, Reader opens as it should.
I've also tried to install the latest 11.4 update, without any luck.
The same installation sources were used on several local workstation, where everything is working fine after the upgrade.

It's definitely a Lion's issue as I rolled back to Snow Leopard after struggling with the card reader and surprise....all my cards can be seen again and my MacBook early 2010 works perfectly. Just as it was working before I purchased Lion. What to do? Well I guess there is only one way to fix the problem. We should demand from Apple to debug Lion from this and many other errors in the code. Overall I am not very impressed with my first Lion encounter and will stay on Snow Leopard untill people would be able at least to use the MacBook hardware properly under any Lion built. I have also had so many other issues with Lion that it may take a few hours to list and it's not a purpose of my visit of this thread. Cheers to all and stay cool.

Disabling E-mail notifications not working after reboot

Hello. It seems that the mail notification and the mail count still persist even if I have it disabled on the settings after rebooting. I've checked the settings after reboot and it is still set as disabled (after following the guide), but the notifications still appear. Is this an bug on the on the app that needs to be fixed? Or am I missing something? Thanks.

I've had a number of problems with the Playbook not recognising the settings I've chosen. In this case, with disabling email notifications, it resets after each reboot.
I've found that if I go into my the Messages app, and then into Message Settings, it shows that alerts are set to be off (display message count, and display new message indicator). The fix for me is to enable alerts, go back to main app screen, then go back into settings and disable alerts once more. At that point the settings seem to stick. So whenever I reboot the playbook, I just have to do that and notifications will remain off until the next reboot.
Let us know if that works for you too. Maybe it will help the engineers figure out what's wrong.

Printer Not Working After Update

I saw an auto update from HP that popped up and stated it was to correct current reading errors in the hp printer from the computer? I NEVER update my printer hardly ever because I KNOW that HP has a reputation for messing up with messages about ink etc. BUT, I went ahead with this one, just in case! NOW my printer won't print anything from my laptop, and I am so pissed because I was in the middle of a printing project and my printer was working JUST fine until I did the update! I swear, I will now have to go buy a NEW FRICKING PRINTER when it was working perfect a few minutes ago!!! GUESS WHAT, I will never by HP printers again!!!! I have the HP Photo Smart Plus, and it is wireless, and it is about two years old, got it in around 2009. It always says it's out of ink but yet continues to print just fine for several months over when it says I should replace the ink. Hmmmmmmm. Now this!!!!! What am I supposed to do??? HP isn't going to answer this. Looks like they set up this conversation to just get FEEDBACK from the public? I don't have the time to wait for a response from the public or to try and call someone at some odd number and wait on the hold for two hours. My job is in two hours and I needed my work printed before I went.. I AM PISSSSSED!!!!! How can I ever TRUST HP again!!!!!! I could never do an UPDATE with you eVER!!!!! YOU CRASHED MY PRINTER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Did I mention how mad I am????? I am going to tell the world about this!!! You know why??? You don't care, and you will just ignor this!!!!! Norine Mungo

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
In the future please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support. Likely if you had called HP your issue could have been resolved in one phone call....
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

[SOLVED] Cpufreq not loading after reboot

I followed wiki on this ,but after reboot cpufreq is not loading from /etc/rc.conf as module
This is message on boot
:: Setting cpufreq governing rules , cpu 0 1wrong, unknown or unhandled CPU?
Error setting new values. Common errors:eq/scaling_available_governors: No such - Do you have proper administration rights? (super-user?)
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?
But if I do a modprobe acpi-cpufreq got this
[root@laptop ~]# modprobe acpi-cpufreq
[root@laptop ~]# /etc/rc.d/cpufreq start
:: Setting cpufreq governing rules , cpu 0 1 [DONE]
This is a /etc/rc.conf/cpufreq
#configuration for cpufreq control
# valid governors:
# ondemand, performance, powersave,
# conservative, userspace
governor="ondemand"
# limit frequency range (optional)
# valid suffixes: Hz, kHz (default), MHz, GHz, THz
min_freq="800MHz"
max_freq="2.01GHz"
# use freq to set up the exact cpu frequency using it with userspace governor
#freq=
Similar happens when I want to load governors as modules.
Laptop is acer with C2D T5800 and min and max values are from cpufreq-info.
Can this be solved?
Thanks in advance!
Last edited by dare023 (2010-06-15 05:44:18)

Here it is without modprobe acpi-cpufreq
[root@laptop ~]# cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to [email protected], please.
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
maximum transition latency: 0.00 ms.
analyzing CPU 1:
no or unknown cpufreq driver is active on this CPU
maximum transition latency: 0.00 ms.
And with modprobe acpi-cpufreq
[root@laptop ~]# modprobe acpi-cpufreq
[root@laptop ~]# cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to [email protected], please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.00 GHz
available frequency steps: 2.00 GHz, 1.60 GHz, 1.20 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 2.00 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.00 GHz (asserted by call to hardware).
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.00 GHz
available frequency steps: 2.00 GHz, 1.60 GHz, 1.20 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 2.00 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 2.00 GHz (asserted by call to hardware).

[Solved] slim not working after installing nvidia 331.20

Hello Arch Community!
I recently joined your ranks and already have some problems with the graphics driver from Nvidia.
my system has been running perfectly for a week now and until today i used the nouveau drivers, but im not very happy with the performance, so i deinstalled them and installed nvidia + nvidia-utils.
no problems so far, in configured everything to my liking with nvidia-settings.
problem: after reboot slim does not start anymore, i just get to tty1. funny thing is i can either use startx and my cinnamon will fire up or i can just use "sudo slim" and slim will start normally.
i already tried
sudo systemctl disable slim
and
sudo systemctl enable slim
to see if its still starting at boot and it does, so im quite confused here.
Last edited by Oedner (2013-11-25 17:55:42)

Scimmia wrote:Probably related to https://bbs.archlinux.org/viewtopic.php?id=173153
thank you very much, i didnt know i can add modules=nvidia in mkinitcpio.conf too. i always thought this was for opensource drivers only
anyway that fixed my problem. in a way. can i instruct slim to show the login prompt on only one monitor? because now the login field is "between" the two monitors. in other words slim uses both monitors like they are one big screen.
it looks like this now: http://abload.de/img/img_20131125_1801054ii4l.jpg
solved it by editing /usr/share/slim/themes/mytheme/slim.theme the line:
input_panel_x 50%
to
input_panel_x 25%
Last edited by Oedner (2013-11-25 17:55:25)

Printer not working after 10.6.8 update

Hi,
My printer was working fine until I updated my imac to 10.6.8.
Now, i have been getting this error whenever i try to print:
Error:/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/ MacOS/rastertoescpII failed
I have an Epson stylus PHOTO RX640.
Im not sure about the driver as i havent needed to download a driver manually, before when I first tried the printer(before update) it automatically worked and printed and didnt ask me anything about drivers..
I tried deleting my print queue, restarting everything, changed my printer to factory settings. (I've looked on other places and i wasnt sure what it meant bby manually adding printer queue..?o.O)
My printer only doesnt want to print. it scans fine, just doesnt print.
HELP PLEASEEE

I don't think that it was the 10.6.8 update. There was an update to the Epson drivers that came out only a couple of days before 10.6.8 became available. You most likely installed the Epson 2.7 drivers along with 10.6.8. That version of the Epson drivers will not work with your printer. See my post in a similar thread on how to revert back to the Epson 20.6 drivers.

Wireless printer not working after 10.5 upgrade

My Canon All-in one MP600 was working fine using 10.4.11 and Airport Extreme Base Station. I upgraded to 10.5.4 and now the printer does not work. I checked the Airport utility and the printer shows under printer. The printer works fine on my wife's MacBook. The old printer setup utility app is not present on 10.5. Am I missing something? I followed the instructions to install the wireless printer but it still does not work. It works fine when I use the USB cable directly to my powerbook G4.

Found problem. Removed printer from Sys Prefs -> Printers and Fax and re-installed it. Works now.

Why does printer not work after network password changed?

I changed the password on my Airport Extreme (5th Gen) which is connected to an iMac,base, and now my HP Photosmart C4750 will not print. I have tried uninstalling/reinstalling the printer software using the original HP printer CD. The error message "The selected WI-Fi Network "network name" is not within the reach of the device." Do I have to change the password back in order for it to work on my wireless?
Appreciate any assistance.

Hi,
The software provided for Mountain Lion does not offer any wireless configuration, therefore it may not work well on the OS.
Connect the printer to the network through the EWS by following the steps below:
Step one: Restore the printer's network default settings
Touch the ATM button () next to Wireless / Scan .
Touch the ATM button () next to Wireless Menu
Touch the ATM button () next to Wireless Settings .
Use the up and down ATM buttons () to select Restore Network Defaults , and then press OK .
Touch the ATM button () next to Yes to confirm your selection.
Step two: create a temporary network connection with the printer to access its EWS
Click the Wi-Fi icon on your Mac.
Click on Join Other Networks.
Click on Show Networks.
Select the HPSETUP network and click on Connect
Allow 2-3 minutes to establish the connection.
Step three: Follow the Wireless Setup Wizard from teh EWS
Open Safari and click the Bookmarks icon, select Bonjour from that window
Note: if the Bonjour option is missing under the Bookmarks menu click on Safari > Preferences > Bookmarks and check the Bonjour box within the Collections section.
From Bonjour double click the C4750. the EWS appears.
Open the Networking tab.
Click on Wireless.
Click the Start Wizard button on the bottom right side of that screen and follow the steps to connect the printer to your network.
Once you are done, reconnect your Mac to your home network by following step two but selectng your home network.
Shlomi

Printer not working after changing network to public IP from bridge

I had my TimeCapsule reset to change my network connection sharing from Bridge mode to Share a public IP address, and now the printer does not work anymore. Can someone help me to set it up again? Thank you in advance!

You may have turned off DHCP on your network. What's your DHCP server now that the TC is in Bridge Mode? How is the printer connected to the network? How is the computer connected to the network? What are the IP addresses of the assorted devices on the network, Time Capsule, computer, printer, router, modem, anything else?

Printer not working after installing new cartridge

have HP D5460 printer. Installed new black cartridge only #564 since I only use black ink. Error message appeared
"Oxc19a0020 turn printer OFF & then ON". Did that and also checked to be sure cartridge was installed properly. It Was.
I can't get the printer to work. What now? Thanks.

The battery is already full. It happened suddenly and started showing low battery sign and sign to charge the ipad. Nothing happening with pressing buttons or even putting on for charging for quite some time.
iPad (3rd gen) Wi-Fi, iOS 7.1

[SOLVED] Printer not working after reboots

Similar Messages

Maybe you are looking for