[SOLVED] Problem with ca-certificates

For some time there is a problem with ca-certificates during update. I receive folowing error:
[user@bragi ~]$ sudo pacman -Suy
:: Synchronizowanie baz danych z pakietami...
core jest już w najnowszej wersji
community jest już w najnowszej wersji
multilib jest już w najnowszej wersji
:: Rozpoczynanie pełnej aktualizacji systemu...
ostrzeżenie: libxml-perl: local (0.08-6) jest nowsze niż community (0.08-5)
rozwiązywanie zależności...
ostrzeżenie: nie można rozwiązać "ca-certificates-mozilla", zależności od "ca-certificates"
:: Następujący pakiet nie mógł zostać zaktualizowany w wyniku niespełnionych zależności:
ca-certificates
:: Czy chcesz pominąć powyższy pakiet przy aktualizacji? [t/N] N
błąd: nie udało się przygotować transakcji (niespodziewany błąd)
I know that this is not in english but the messages says that there is a error with dependency ca-certificates-mozilla <--> ca-certificates.
I ask this same question on polish forum but I only receive suggestion to try run:
pacman -Suyy
but this is not a solution.
Any ideas?
Last edited by web01 (2014-10-16 19:36:30)

I'm not sure but maybe becouse of this
[user@bragi ~]$ sudo pacman -Suyy
:: Synchronizing package databases...
core 116.7 KiB 1945K/s 00:00 [#####################################################] 100%
extra 1767.3 KiB 2.16M/s 00:01 [#####################################################] 100%
community 2.3 MiB 2.28M/s 00:01 [#####################################################] 100%
multilib 118.9 KiB 2.04M/s 00:00 [#####################################################] 100%
:: Starting full system upgrade...
:: Replace ati-dri with extra/mesa-dri? [Y/n]
:: Replace baloo with extra/baloo4? [Y/n]
:: Replace baloo-widgets with extra/baloo4-widgets? [Y/n]
:: Replace grantlee with extra/grantlee-qt4? [Y/n]
:: Replace intel-dri with extra/mesa-dri? [Y/n]
:: Replace java-common with extra/java-runtime-common? [Y/n]
:: Replace kfilemetadata-frameworks with extra/kfilemetadata5? [Y/n]
warning: libxml-perl: local (0.08-6) is newer than community (0.08-5)
:: Replace nouveau-dri with extra/mesa-dri? [Y/n]
:: Replace svga-dri with extra/mesa-dri? [Y/n]
resolving dependencies...
looking for inter-conflicts...
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: kwin and kdebase-workspace are in conflict

Similar Messages

  • Having some problems with security certificates

    Hello,
    In some pages, e.g. Twitter, and pages that load FB comments sections, I'm having problems with the certificates and the pages won't load. I don't get an option to add an exception either, therefore I cannot access pages.
    I have pasted the error details below. Here is some important info for you:
    Version: 9.0.1 <-- Upgrading is NOT an option, this is a corporate machine
    Connect via proxy: yes
    I doubt very much that this is an issue with the connection, as IE and Chrome are NOT having this issue on the same connection.
    Error I get:
    This Connection is Untrusted
    You have asked Firefox to connect securely to twitter.com, but we can't confirm that your connection is secure.
    Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
    What Should I Do?
    If you usually connect to this site without problems, this error could mean that someone is
    trying to impersonate the site, and you shouldn't continue.
    Technical Details
    twitter.com uses an invalid security certificate.
    The certificate is not trusted because the issuer certificate is not trusted.
    (Error code: sec_error_untrusted_issuer)
    Can anyone shed some light? The usual troubleshooting I've come across hasn't helped me much.

    Off the cuff it smells of a man-in-the-middle situation to me. As far as I know, Twitter does have a valid certificate, signed by Verisign. That IE and Chrome have no problem with it, could just mean they do not check resp. do let you know.
    I'll have to pass here, because I would not know, how to turn this checking off in FX 9.0 - in any case I would think twice before doing it. The place to look would be Options > advanced > Encryption.
    Hope somebody else joins us:)
    PS: keeping you nailed down to Fx 9.0 version is unsafe - not just for you, but for your company as well.

  • Getting error "Problem with SSL Certificate" but I'm connecting to my private server without SSL

    I wanted to create a PDF from a subtree at a website. The first problem was that Acrobat Pro (11.0.7) wouldn't spider it (probably because there was a robot.txt file there) so I had to use SiteSucker to pull the pages down to my Mac.
    Then I discovered that Acrobat Pro can't handle file:/// URLs so that was no good either
    So then I copied all the pages to a folder on my Linux server where I use a non-standard port (86) for http connection as a minor security precaution.
    When I tried to access that from Acrobat Pro, it bitched about a problem with SSL Certificate but gave me no option to do anything about it. More relevantly, all the files were accessible using http protocol, not https so there shouldn't have been any need to deal with SSL certificates at all
    I had to temporarily enable port 80 on my apache server at which point it's now pulling all the files in and hopefully converting them.
    A) We're at version 11 ---- these kinds of issues should have been fixed years ago
    B) While you're at it, fix the stupid UI issue where the download dialog disappears completely if Acrobat Pro doesn't have the focus. On a long download, I'd like to be able to see progress while working on other stuff. Acrobat Pro is not the center of the universe!

    Interesting point 2, I am working on a Mac plugin at the moment. It does not hide its dialogs when switching to a different app. I consider this a bug and will fix it so the dialog disappears. I hadn't considered the question of progress but there is a very strong reason to do this on the Mac.
    My tests seem to show that
    (a) to get a dialog to sit above PDF documents all the time, it must be on a higher "level".
    (b) if a dialog is at a higher level, this is a global setting.
    So, if the dialog is not hidden when switching all, it will typically sit on top of the other app's document windows. This would not be popular, as the end user, unless they have mountains of screen space and choose to use it that way, must either close or move the dialog when switching app, then bring the dialog back.  So, because Acrobat Pro is not the centre of the universe, it will hide dialogs (or rather, the Mac will, as it's a standard option when creating a window).

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Java Webstart application problem with TLS certificate revocation checks (Java 1.7.0_76)

    We have a problem with our Java Web Start Application regarding the TLS certificate revocation check:
    The application is running on a server within a wide area network which is separated from the internet.
    The application users have access to the WAN, and also access to the internet over some corporate proxy/firewall.
    The user has to enter, for example "https://my-site.de/myapp/ma.jnlp" within a webbrowser or could also call  "javaws https://my-site.de/myapp/ma.jnlp" to start the application client.
    The webserver has a certificate from a trusted certificate authority. This certificate seems to be ok, the browser is even configured to perform OCSP status check.
    The application files are signed with a certificate from another trusted certificate authority. This certificate seems also to be ok. Regarding this certificate there
    are no problems with certificate revocation checks.
    The problem is, while starting the application client there is a message box which tell us something like "the connection to this website ist not trustworthy",
    "Website: https://my-site.de:80", and something about an invalid certificate, meaning the webserver certificate.
    Obviously the jvm runtime, which is executed on the users workstation, tries to perform a revocation check for the webservers certificate, but this fails because
    it cannot fetch the certificate under https://my-site.de:80.
    The application will execute without further problems after that message but the users are very concerned about the "invalid" certificate, so here are my questions:
    - Why is the application trying to get the webserver certificate over Port 80. Our application developers told me, there is no corresponding statement. Calling this address
      has to fail while "https://my-site.de:443" or "https://my-site.de" would not have a problem.
    - Is there a way to make the application go on without performing a tls revocation check? I mean, by adjusting the application sourcecode and not by configuring the users Java Control Panel.
      While disabling the TLS Certificate Revocation check in the Java Control Panel, the Webstart Application executes without a warning message, but this is not a workable solution for
      our users.
    It would be great if someone can help me with a hint so i can send our developers into the right direction;-)
    Many thanks!
    This is a part from a java console output after calling "javaws -verbose https://my-site.de/myapp/"
    (sorry for this is in german... and also my english above)
    network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
    network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
    security: OCSP Response: GOOD
    network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
    security: UNAUTHORIZED
    security: Failing over to CRLs: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
    network: Cacheeintrag gefunden [URL: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl, Version: null] prevalidated=false/0
    cache: Adding MemoryCache entry: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl
    cache: Resource http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl has expired.
    network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
    network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
    network: ResponseCode für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: 200
    network: Codierung für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: null
    network: Verbindung mit http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl trennen
    CacheEntry[http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl]: updateAvailable=true,lastModified=Tue Mar 24 10:50:01 CET 2015,length=53241
    network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird
    network: Verbindung von socket://ldap.serverpass.telesec.de:389 mit Proxy=DIRECT wird hergestellt
    security: Revocation Status Unknown
    com.sun.deploy.security.RevocationChecker$StatusUnknownException: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
        at com.sun.deploy.security.RevocationChecker.checkOCSP(Unknown Source)
        at com.sun.deploy.security.RevocationChecker.check(Unknown Source)
        at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
        at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
        at com.sun.deploy.security.RevocationCheckHelper.checkRevocationStatus(Unknown Source)
        at com.sun.deploy.security.X509TrustManagerDelegate.checkTrusted(Unknown Source)
        at com.sun.deploy.security.X509Extended7DeployTrustManagerDelegate.checkServerTrusted(Unknown Source)
        at com.sun.deploy.security.X509Extended7DeployTrustManager.checkServerTrusted(Unknown Source)
        at sun.security.ssl.ClientHandshaker.serverCertificate(Unknown Source)
        at sun.security.ssl.ClientHandshaker.processMessage(Unknown Source)
        at sun.security.ssl.Handshaker.processLoop(Unknown Source)
        at sun.security.ssl.Handshaker.process_record(Unknown Source)
        at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
        at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
        at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
        at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
        at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
        at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
        at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
        at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
        at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
        at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
        at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
        at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
        at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
        at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
        at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
        at com.sun.deploy.model.ResourceProvider.getResource(Unknown Source)
        at com.sun.javaws.jnl.LaunchDescFactory._buildDescriptor(Unknown Source)
        at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
        at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
        at com.sun.javaws.Main.launchApp(Unknown Source)
        at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
        at com.sun.javaws.Main.access$000(Unknown Source)
        at com.sun.javaws.Main$1.run(Unknown Source)
        at java.lang.Thread.run(Unknown Source)
        Suppressed: com.sun.deploy.security.RevocationChecker$StatusUnknownException
            at com.sun.deploy.security.RevocationChecker.checkCRLs(Unknown Source)
            ... 35 more
    Caused by: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
        at sun.security.provider.certpath.OCSP.check(Unknown Source)
        at sun.security.provider.certpath.OCSP.check(Unknown Source)
        at sun.security.provider.certpath.OCSP.check(Unknown Source)
        ... 36 more
    security: Ungültiges Zertifikat vom HTTPS-Server
    network: Cacheeintrag nicht gefunden [URL: https://my-site.de:80, Version: null]

    Add the JSF Jars to the WEB-INF/lib directory of the application. If still getting error add to the CLASSPATH variable in the startWebLogic script in the domain/bin directory.

  • [Solved] Problem with upgrading polkit or filesystem

    Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
    A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit"  So I tried that a couple of times but I could never get pacman to finish and get past that.  I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it).  So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue.  Fast forward to today and I go to upgrade my system.  Among the 83 updates or so was polkit and filesystem.  What do you know it gets stuck at "(15/83) upgrading polkit".  Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem.  I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
    I tried re-installing polkit again and filesystem again but they continue to get stuck.  I cannot "complete" the upgrade even though they show the appropriate version when I check.
    Terminal
    [507] shauder@arch-desktop [~] $ sudo pacman -S polkit
    warning: polkit-0.107-4 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): polkit-0.107-4
    Total Installed Size: 1.77 MiB
    Net Upgrade Size: 0.00 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [########################################################] 100%
    (1/1) loading package files [########################################################] 100%
    (1/1) checking for file conflicts [########################################################] 100%
    (1/1) checking available disk space [########################################################] 100%
    (1/1) upgrading polkit
    /var/log/pacman.log
    [2012-07-18 18:27] installed filesystem (2012.6-4)
    [2012-07-18 18:27] installed findutils (4.4.2-4)
    [2012-07-18 18:27] installed gawk (4.0.1-1)
    [2012-07-18 18:27] installed gettext (0.18.1.1-4)
    [2012-07-18 18:27] installed grep (2.13-2)
    [2012-07-18 18:27] installed sed (4.2.1-4)
    [2012-07-18 18:27] installed grub (0.97-21)
    [2012-07-18 18:27] installed gzip (1.5-1)
    [2012-07-18 18:27] installed gdbm (1.10-1)
    [2012-07-18 18:27] installed perl (5.16.0-2)
    [2012-07-18 18:27] installed openssl (1.0.1.c-1)
    [2012-07-18 18:27] installed libsasl (2.1.23-9)
    [2012-07-18 18:27] installed libldap (2.4.31-4)
    [2012-07-18 18:27] installed keyutils (1.5.5-3)
    [2012-07-18 18:27] installed krb5 (1.10.2-2)
    [2012-07-18 18:27] installed heirloom-mailx (12.5-3)
    [2012-07-18 18:27] installed inetutils (1.9.1-2)
    [2012-07-18 18:27] installed iproute2 (3.4.0-2)
    [2012-07-18 18:27] installed sysvinit (2.88-6)
    [2012-07-18 18:27] installed initscripts (2012.06.3-2)
    [2012-07-18 18:27] installed sysfsutils (2.1.0-8)
    [2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
    [2012-07-18 18:27] installed iputils (20101006-4)
    [2012-07-18 18:27] installed jfsutils (1.1.15-3)
    [2012-07-18 18:27] installed less (444-3)
    [2012-07-18 18:27] installed licenses (2.9-1)
    [2012-07-18 18:27] installed linux-firmware (20120625-1)
    [2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
    [2012-07-18 18:27] installed expat (2.1.0-1)
    [2012-07-18 18:27] installed libarchive (3.0.4-1)
    [2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
    [2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
    [2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-18 18:27] ==> Building image from preset: 'default'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [autodetect]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] ==> Building image from preset: 'fallback'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] installed linux (3.4.5-1)
    [2012-07-18 18:27] installed logrotate (3.8.1-2)
    [2012-07-18 18:27] installed lvm2 (2.02.96-3)
    [2012-07-18 18:27] installed texinfo (4.13a-7)
    [2012-07-18 18:27] installed groff (1.21-2)
    [2012-07-18 18:27] installed libpipeline (1.2.1-1)
    [2012-07-18 18:27] it's recommended to create an initial
    [2012-07-18 18:27] database running as root:
    [2012-07-18 18:27] "/usr/bin/mandb --quiet"
    [2012-07-18 18:27] installed man-db (2.6.2-1)
    [2012-07-18 18:27] installed man-pages (3.41-1)
    [2012-07-18 18:27] installed mdadm (3.2.5-2)
    [2012-07-18 18:27] installed nano (2.2.6-2)
    [2012-07-18 18:27] installed ca-certificates (20120623-1)
    [2012-07-18 18:27] installed libssh2 (1.4.2-1)
    [2012-07-18 18:27] installed curl (7.26.0-1)
    [2012-07-18 18:27] installed pth (2.0.7-4)
    [2012-07-18 18:27] installed libksba (1.2.0-2)
    [2012-07-18 18:27] installed libassuan (2.0.3-1)
    [2012-07-18 18:27] installed pinentry (0.8.1-4)
    [2012-07-18 18:27] installed dirmngr (1.1.0-4)
    [2012-07-18 18:27] installed gnupg (2.0.19-2)
    [2012-07-18 18:27] installed gpgme (1.3.1-4)
    [2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
    [2012-07-18 18:27] installed archlinux-keyring (20120622-1)
    [2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
    [2012-07-18 18:27] >>> to import the data required by pacman for package verification.
    [2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
    [2012-07-18 18:27] installed pacman (4.0.3-3)
    [2012-07-18 18:27] installed pciutils (3.1.10-1)
    [2012-07-18 18:27] installed pcmciautils (018-4)
    [2012-07-18 18:27] installed libnl (3.2.11-1)
    [2012-07-18 18:27] installed libusbx (1.0.12-2)
    [2012-07-18 18:27] installed libpcap (1.3.0-1)
    [2012-07-18 18:27] installed ppp (2.4.5-3)
    [2012-07-18 18:27] installed procps-ng (3.3.3-3)
    [2012-07-18 18:27] installed psmisc (22.19-1)
    [2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
    [2012-07-18 18:27] installed shadow (4.1.5.1-1)
    [2012-07-18 18:27] installed eventlog (0.2.12-3)
    [2012-07-18 18:27] installed syslog-ng (3.3.5-2)
    [2012-07-18 18:27] installed tar (1.26-2)
    [2012-07-18 18:27] installed usbutils (006-1)
    [2012-07-18 18:27] installed vi (1:050325-2)
    [2012-07-18 18:27] installed wget (1.13.4-1)
    [2012-07-18 18:27] installed which (2.20-5)
    [2012-07-18 18:27] installed dbus-core (1.6.2-2)
    [2012-07-18 18:27] installed wpa_supplicant (1.0-1)
    [2012-07-18 18:27] installed xfsprogs (3.1.8-2)
    [2012-07-18 18:27] installed m4 (1.4.16-2)
    [2012-07-18 18:27] installed autoconf (2.69-1)
    [2012-07-18 18:27] installed automake (1.12.2-1)
    [2012-07-18 18:27] installed binutils (2.22-9)
    [2012-07-18 18:27] installed bison (2.5.1-1)
    [2012-07-18 18:27] installed fakeroot (1.18.4-1)
    [2012-07-18 18:27] installed flex (2.5.35-5)
    [2012-07-18 18:27] installed mpfr (3.1.1-1)
    [2012-07-18 18:27] installed libmpc (0.9-2)
    [2012-07-18 18:27] installed isl (0.10-1)
    [2012-07-18 18:27] installed cloog (0.17.0-2)
    [2012-07-18 18:27] installed ppl (1.0-1)
    [2012-07-18 18:27] installed gcc (4.7.1-4)
    [2012-07-18 18:27] installed libltdl (2.4.2-6)
    [2012-07-18 18:27] installed libtool (2.4.2-6)
    [2012-07-18 18:27] installed make (3.82-4)
    [2012-07-18 18:27] installed patch (2.6.1-3)
    [2012-07-18 18:27] installed pkg-config (0.27-1)
    [2012-07-18 18:37] Running 'pacman -Syy'
    [2012-07-18 18:37] synchronizing package lists
    [2012-07-18 18:38] Running 'pacman -Syy'
    [2012-07-18 18:38] synchronizing package lists
    [2012-07-18 18:39] Running 'pacman -S sudo'
    [2012-07-18 18:43] Running 'pacman -S sudo'
    [2012-07-18 18:44] Running 'pacman -S sudo'
    [2012-07-18 18:44] installed sudo (1.8.5.p2-1)
    [2012-07-18 18:45] Running 'pacman -S alsa-utils'
    [2012-07-18 18:46] installed alsa-lib (1.0.25-1)
    [2012-07-18 18:46] installed dialog (1.1_20120706-1)
    [2012-07-18 18:46] installed libogg (1.3.0-1)
    [2012-07-18 18:46] installed flac (1.2.1-3)
    [2012-07-18 18:46] installed libvorbis (1.3.3-1)
    [2012-07-18 18:46] installed libsndfile (1.0.25-2)
    [2012-07-18 18:46] installed libsamplerate (0.1.8-1)
    [2012-07-18 18:46] installed alsa-utils (1.0.25-3)
    [2012-07-18 18:46] Running 'pacman -S alsa-plugins'
    [2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
    [2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
    [2012-07-18 18:48] installed xproto (7.0.23-1)
    [2012-07-18 18:48] installed libxdmcp (1.1.1-1)
    [2012-07-18 18:48] installed freetype2 (2.4.10-1)
    [2012-07-18 18:48] installed libfontenc (1.1.1-1)
    [2012-07-18 18:48] installed fontsproto (2.1.2-1)
    [2012-07-18 18:48] installed libxfont (1.4.5-1)
    [2012-07-18 18:48] installed libpciaccess (0.13.1-1)
    [2012-07-18 18:48] installed libdrm (2.4.37-1)
    [2012-07-18 18:48] installed pixman (0.26.2-1)
    [2012-07-18 18:48] installed libxau (1.0.7-1)
    [2012-07-18 18:48] installed xcb-proto (1.7.1-1)
    [2012-07-18 18:48] installed libxcb (1.8.1-1)
    [2012-07-18 18:48] installed kbproto (1.0.6-1)
    [2012-07-18 18:48] installed libx11 (1.5.0-1)
    [2012-07-18 18:48] installed libxkbfile (1.0.8-1)
    [2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
    [2012-07-18 18:48] installed xkeyboard-config (2.6-1)
    [2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
    [2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
    [2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
    [2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
    [2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
    [2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
    [2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
    [2012-07-18 18:48] installed xorg-font-utils (7.6-3)
    [2012-07-18 18:48] updating font cache... done.
    [2012-07-18 18:48] installed fontconfig (2.8.0-2)
    [2012-07-18 18:49] Updating font cache... done.
    [2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
    [2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
    [2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
    [2012-07-18 18:49] installed xorg-server (1.12.3-1)
    [2012-07-18 18:49] installed xextproto (7.2.1-1)
    [2012-07-18 18:49] installed libxext (1.3.1-1)
    [2012-07-18 18:49] installed libice (1.0.8-1)
    [2012-07-18 18:49] installed libsm (1.2.1-1)
    [2012-07-18 18:49] installed libxt (1.1.3-1)
    [2012-07-18 18:49] installed libxmu (1.1.1-1)
    [2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
    [2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
    [2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
    [2012-07-18 18:49] installed renderproto (0.11.1-2)
    [2012-07-18 18:49] installed libxrender (0.9.7-1)
    [2012-07-18 18:49] installed randrproto (1.3.2-2)
    [2012-07-18 18:49] installed libxrandr (1.3.2-2)
    [2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
    [2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
    [2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
    [2012-07-18 18:49] installed inputproto (2.2-1)
    [2012-07-18 18:49] installed libxi (1.6.1-1)
    [2012-07-18 18:49] installed xineramaproto (1.2.1-2)
    [2012-07-18 18:49] installed libxinerama (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
    [2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
    [2012-07-18 18:49] installed mcpp (2.7.2-4)
    [2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
    [2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
    [2012-07-18 18:49] installed xorg-xset (1.2.2-1)
    [2012-07-18 18:49] installed fixesproto (5.0-2)
    [2012-07-18 18:49] installed libxfixes (5.0-2)
    [2012-07-18 18:49] installed libxcursor (1.1.13-1)
    [2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
    [2012-07-18 18:49] installed xorg-server-utils (7.6-3)
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
    [2012-07-18 18:51] installed videoproto (2.3.1-2)
    [2012-07-18 18:51] installed libxv (1.0.7-1)
    [2012-07-18 18:51] installed libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed nvidia-utils (302.17-1)
    [2012-07-18 18:51] In order to use nvidia module, reboot the system.
    [2012-07-18 18:51] installed nvidia (302.17-3)
    [2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
    [2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
    [2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
    [2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
    [2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
    [2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
    [2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
    [2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
    [2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
    [2012-07-18 18:55] installed xorg-twm (1.0.7-1)
    [2012-07-18 18:55] installed libxpm (3.5.10-1)
    [2012-07-18 18:55] installed libxaw (1.0.11-1)
    [2012-07-18 18:55] installed libxft (2.3.1-1)
    [2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
    [2012-07-18 18:55] installed xorg-luit (1.1.1-1)
    [2012-07-18 18:55] installed xbitmaps (1.1.1-2)
    [2012-07-18 18:55] installed xterm (281-1)
    [2012-07-18 18:55] Running 'pacman -S dbus'
    [2012-07-18 18:55] installed dbus (1.6.2-1)
    [2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
    [2012-07-18 18:56] installed ttf-dejavu (2.33-3)
    [2012-07-18 18:57] Running 'pacman -S awesome'
    [2012-07-18 18:57] installed libpng (1.5.11-1)
    [2012-07-18 18:57] installed cairo (1.12.2-2)
    [2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
    [2012-07-18 18:57] installed libtiff (4.0.2-1)
    [2012-07-18 18:57] installed giflib (4.1.6-5)
    [2012-07-18 18:57] installed libid3tag (0.15.1b-7)
    [2012-07-18 18:57] installed imlib2 (1.4.5-2)
    [2012-07-18 18:57] installed libev (4.11-1)
    [2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
    [2012-07-18 18:57] installed lua (5.1.5-2)
    [2012-07-18 18:57] installed libdatrie (0.2.5-1)
    [2012-07-18 18:57] installed libthai (0.1.17-1)
    [2012-07-18 18:57] installed pango (1.30.1-1)
    [2012-07-18 18:57] installed xcb-util (0.3.9-1)
    [2012-07-18 18:57] installed startup-notification (0.12-3)
    [2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
    [2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
    [2012-07-18 18:57] installed awesome (3.4.13-1)
    [2012-07-18 18:58] Running 'pacman -S rlwrap feh'
    [2012-07-18 18:58] installed rlwrap (0.37-2)
    [2012-07-18 18:58] installed giblib (1.2.4-5)
    [2012-07-18 18:58] installed libexif (0.6.20-2)
    [2012-07-18 18:58] installed feh (2.5-1)
    [2012-07-18 18:59] Running 'pacman -S packer'
    [2012-07-18 18:59] Running 'pacman -S lightdm'
    [2012-07-18 19:01] Running 'pacman -S fakeroot'
    [2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
    [2012-07-18 19:08] Running 'pacman -S git'
    [2012-07-18 19:08] installed perl-error (0.17018-1)
    [2012-07-18 19:08] installed git (1.7.11.2-1)
    [2012-07-18 19:08] Running 'pacman -S jshon'
    [2012-07-18 19:08] installed jansson (2.3-1)
    [2012-07-18 19:08] installed jshon (20111222-1)
    [2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
    [2012-07-18 19:08] installed packer (20120718-1)
    [2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
    [2012-07-18 19:10] installed polkit (0.105-1)
    [2012-07-18 19:10] installed accountsservice (0.6.22-1)
    [2012-07-18 19:10] installed dbus-glib (0.100-1)
    [2012-07-18 19:10] installed sqlite (3.7.13-1)
    [2012-07-18 19:10] installed python2 (2.7.3-2)
    [2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
    [2012-07-18 19:10] installed perl-xml-parser (2.41-3)
    [2012-07-18 19:10] installed intltool (0.50.2-1)
    [2012-07-18 19:10] installed libxml2 (2.7.8-2)
    [2012-07-18 19:10] installed itstool (1.1.2-1)
    [2012-07-18 19:10] installed iso-codes (3.34-1)
    [2012-07-18 19:10] installed libxklavier (5.2.1-2)
    [2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
    [2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
    [2012-07-18 19:14] installed lightdm (1.3.1-4)
    [2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
    [2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
    [2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
    [2012-07-18 19:15] installed bzr (2.5.1-1)
    [2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
    [2012-07-18 19:15] installed libxslt (1.1.26-3)
    [2012-07-18 19:15] installed docbook-xml (4.5-5)
    [2012-07-18 19:15] installed rarian (0.8.1-2)
    [2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
    [2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
    [2012-07-18 19:15] installed gtk-doc (1.18-1)
    [2012-07-18 19:15] installed atk (2.4.0-1)
    [2012-07-18 19:15] installed compositeproto (0.4.2-2)
    [2012-07-18 19:15] installed libxcomposite (0.4.3-2)
    [2012-07-18 19:15] installed damageproto (1.2.1-2)
    [2012-07-18 19:15] installed libxdamage (1.1.3-2)
    [2012-07-18 19:15] installed shared-mime-info (1.0-1)
    [2012-07-18 19:15] installed libtasn1 (2.13-1)
    [2012-07-18 19:15] installed nettle (2.5-1)
    [2012-07-18 19:15] installed p11-kit (0.12-1)
    [2012-07-18 19:15] installed gnutls (3.0.21-1)
    [2012-07-18 19:15] installed libdaemon (0.14-2)
    [2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
    [2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
    [2012-07-18 19:15] ==> dbus needs to be running when you start it.
    [2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
    [2012-07-18 19:15] ==> configuration on dhcp-less networks.
    [2012-07-18 19:15]
    [2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
    [2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
    [2012-07-18 19:15] ==> twisted for avahi-bookmarks.
    [2012-07-18 19:15] installed avahi (0.6.31-3)
    [2012-07-18 19:15] installed libcups (1.5.3-5)
    [2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
    [2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
    [2012-07-18 19:15] installed gtk2 (2.24.10-3)
    [2012-07-18 19:15] installed gtk-engines (2.21.0-1)
    [2012-07-18 19:15] installed icu (49.1.2-1)
    [2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
    [2012-07-18 19:15] installed orc (0.4.16-1)
    [2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
    [2012-07-18 19:15] installed libproxy (0.4.7-2)
    [2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-18 19:15] installed glib-networking (2.32.3-1)
    [2012-07-18 19:15] installed libsoup (2.38.1-1)
    [2012-07-18 19:15] ==> aspell comes with no default dictionary
    [2012-07-18 19:15] installed aspell (0.60.6.1-1)
    [2012-07-18 19:15] installed hunspell (1.3.2-1)
    [2012-07-18 19:15] installed hspell (1.1-2)
    [2012-07-18 19:15] installed enchant (1.6.0-4)
    [2012-07-18 19:15] installed geoclue (0.12.0-5)
    [2012-07-18 19:15] installed libwebkit (1.8.1-1)
    [2012-07-18 19:15] installed vala (0.16.1-1)
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:47] Running 'pacman -R lightdm'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:49] removed libwebkit (1.8.1-1)
    [2012-07-18 19:49] removed geoclue (0.12.0-5)
    [2012-07-18 19:49] removed enchant (1.6.0-4)
    [2012-07-18 19:49] userdel: user lightdm is currently used by process 657
    [2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
    [2012-07-18 19:49] removed lightdm (1.3.1-4)
    [2012-07-18 19:49] removed libxklavier (5.2.1-2)
    [2012-07-18 19:49] removed dbus-glib (0.100-1)
    [2012-07-18 19:49] removed accountsservice (0.6.22-1)
    [2012-07-18 19:50] Running 'pacman -S chromium'
    [2012-07-18 19:50] installed dbus-glib (0.100-1)
    [2012-07-18 19:50] installed nspr (4.9.1-1)
    [2012-07-18 19:50] installed nss (3.13.5-1)
    [2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
    [2012-07-18 19:50] installed libevent (2.0.19-1)
    [2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
    [2012-07-18 19:50] installed libxss (1.2.2-1)
    [2012-07-18 19:50] installed desktop-file-utils (0.20-1)
    [2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
    [2012-07-18 19:50] installed chromium (20.0.1132.57-1)
    [2012-07-18 19:50] Running 'pacman -Sy abs'
    [2012-07-18 19:50] synchronizing package lists
    [2012-07-18 19:51] installed rsync (3.0.9-3)
    [2012-07-18 19:51] installed abs (2.4.3-2)
    [2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
    [2012-07-18 19:53] installed ca-certificates-java (20120608-1)
    [2012-07-18 19:53] installed recordproto (1.14.2-1)
    [2012-07-18 19:53] installed libxtst (1.2.1-1)
    [2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
    [2012-07-18 19:53] done.
    [2012-07-18 19:53] when you use a non-reparenting window manager
    [2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-07-18 19:53] /etc/profile.d/openjdk6.sh
    [2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
    [2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
    [2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
    [2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
    [2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
    [2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
    [2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
    [2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
    [2012-07-18 19:53] installed gperf (3.0.4-4)
    [2012-07-18 19:53] installed zip (3.0-3)
    [2012-07-18 19:53] installed unzip (6.0-6)
    [2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
    [2012-07-18 19:53] installed lzo2 (2.06-1)
    [2012-07-18 19:53] installed squashfs-tools (4.2-2)
    [2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
    [2012-07-18 19:53] installed libusb-compat (0.1.4-2)
    [2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
    [2012-07-18 19:54] installed erlang (R15B01-1)
    [2012-07-18 19:54] installed sdl (1.2.15-1)
    [2012-07-18 19:54] installed dri2proto (2.6-1)
    [2012-07-18 19:54] installed glproto (1.4.15-1)
    [2012-07-18 19:54] installed mesa (8.0.4-1)
    [2012-07-18 19:54] installed esdl (2:1.2-1)
    [2012-07-18 19:54] installed schedtool (1.3.0-2)
    [2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed pngcrush (1.7.31-1)
    [2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed repo (1.17-1)
    [2012-07-18 19:59] Running 'pacman -S terminator'
    [2012-07-18 19:59] installed vte-common (0.32.2-1)
    [2012-07-18 19:59] installed vte (0.28.2-3)
    [2012-07-18 19:59] installed libglade (2.6.4-3)
    [2012-07-18 19:59] installed python2-cairo (1.10.0-1)
    [2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
    [2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
    [2012-07-18 19:59] installed pygtk (2.24.0-3)
    [2012-07-18 19:59] installed terminator (0.96-1)
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:01] removed gcc-libs (4.7.1-4)
    [2012-07-18 20:01] removed binutils (2.22-9)
    [2012-07-18 20:01] removed gcc (4.7.1-4)
    [2012-07-18 20:01] removed libtool (2.4.2-6)
    [2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
    [2012-07-18 20:01] installed binutils-multilib (2.22-8)
    [2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
    [2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
    [2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
    [2012-07-18 20:01] installed lib32-ncurses (5.9-1)
    [2012-07-18 20:01] installed lib32-readline (6.2.003-1)
    [2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 20:07] Running 'pacman -S ssh'
    [2012-07-18 20:10] Running 'pacman -S ssh-keygen'
    [2012-07-18 20:10] Running 'pacman -S openssh'
    [2012-07-18 20:10] installed libedit (20120311_3.0-1)
    [2012-07-18 20:10] installed dnssec-anchors (20120422-1)
    [2012-07-18 20:10] installed ldns (1.6.13-1)
    [2012-07-18 20:10] installed openssh (6.0p1-3)
    [2012-07-18 20:11] Running 'pacman -S pbcopy'
    [2012-07-18 20:11] Running 'pacman -S copy'
    [2012-07-18 20:13] Running 'pacman -S gedit'
    [2012-07-18 20:13] installed lcms2 (2.3-2)
    [2012-07-18 20:13] installed libgusb (0.1.3-1)
    [2012-07-18 20:13] installed gd (2.0.36RC1-5)
    [2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
    [2012-07-18 20:13] installed libieee1284 (0.2.11-4)
    [2012-07-18 20:13] installed v4l-utils (0.8.8-1)
    [2012-07-18 20:13] installed net-snmp (5.7.1-3)
    [2012-07-18 20:13] NOTE
    [2012-07-18 20:13] ----
    [2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
    [2012-07-18 20:13] installed sane (1.0.22-9)
    [2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
    [2012-07-18 20:13] installed colord (0.1.21-2)
    [2012-07-18 20:13] installed gtk3 (3.4.3-1)
    [2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
    [2012-07-18 20:13] installed libpeas (1.4.0-2)
    [2012-07-18 20:13] installed enchant (1.6.0-4)
    [2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
    [2012-07-18 20:13] installed python2-gobject (3.2.2-1)
    [2012-07-18 20:13] installed dconf (0.12.1-2)
    [2012-07-18 20:13] installed gedit (3.4.2-1)
    [2012-07-18 20:15] Running 'pacman -S python'
    [2012-07-18 20:16] installed python (3.2.3-3)
    [2012-07-18 20:26] Running 'pacman -S xclip'
    [2012-07-18 20:26] installed xclip (0.12-3)
    [2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
    [2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
    [2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
    [2012-07-18 20:37] installed openal (1.14-1)
    [2012-07-18 20:37] installed lib32-openal (1.14-1)
    [2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
    [2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
    [2012-07-18 20:37] installed swt (3.7.2-1)
    [2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:50] The android group has been removed, install android packages as root.
    [2012-07-18 20:50] installed android-sdk (r20-2)
    [2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:54] The android group has been removed, install android packages as root.
    [2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
    [2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
    [2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
    [2012-07-18 21:10] Running 'pacman -S perl-switch'
    [2012-07-18 21:10] installed perl-switch (2.16-1)
    [2012-07-21 03:29] Running 'pacman -S flashplugin'
    [2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
    [2012-07-21 03:29] installed mozilla-common (1.4-3)
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
    [2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
    [2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
    [2012-07-21 03:32] Running 'pacman -S libvdpau'
    [2012-07-21 03:32] installed libvdpau (0.4.1-2)
    [2012-07-21 14:53] Running 'pacman -S gedit-common'
    [2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
    [2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:00] Running 'pacman -S gtk-icons'
    [2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
    [2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
    [2012-07-21 15:06] removed gedit (3.4.2-1)
    [2012-07-21 15:06] removed python2-gobject (3.2.2-1)
    [2012-07-21 15:06] removed libpeas (1.4.0-2)
    [2012-07-21 15:06] removed iso-codes (3.34-1)
    [2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
    [2012-07-21 15:06] removed enchant (1.6.0-4)
    [2012-07-21 15:06] removed dconf (0.12.1-2)
    [2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] removed libsoup (2.38.1-1)
    [2012-07-21 15:06] removed glib-networking (2.32.3-1)
    [2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-21 15:07] Running 'pacman -R wxgtk'
    [2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
    [2012-07-21 15:07] Running 'pacman -R libxt libsm'
    [2012-07-21 15:11] Running 'pacman -S ranger'
    [2012-07-21 15:11] installed ranger (1.5.4-1)
    [2012-07-21 15:32] Running 'pacman -S irssi'
    [2012-07-21 15:32] installed irssi (0.8.15-6)
    [2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
    [2012-07-24 20:20] installed sublime-text (2.0.1-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
    [2012-07-24 23:41] installed dropbox (1.4.11-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
    [2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
    [2012-07-24 23:41] installed dropbox-daemon (0.8-8)
    [2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
    [2012-07-24 23:48] installed dropbox-cli (1-12)
    [2012-07-24 23:49] Running 'pacman -S nautilus'
    [2012-07-24 23:56] Running 'pacman -S ranger'
    [2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman -Sy'
    [2012-07-25 00:23] synchronizing package lists
    [2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:25] installed gconf (3.2.5-2)
    [2012-07-25 00:25] installed libmng (1.0.10-4)
    [2012-07-25 00:25] installed qt (4.8.2-3)
    [2012-07-25 00:25] installed qtwebkit (2.2.2-1)
    [2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
    [2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:28] installed libpng12 (1.2.49-1)
    [2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:31] installed spotify (0.8.4.103-1)
    [2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman -Syy'
    [2012-07-29 16:58] synchronizing package lists
    [2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 17:00] installed gsm (1.0.13-7)
    [2012-07-29 17:00] installed lame (3.99.5-1)
    [2012-07-29 17:00] installed libasyncns (0.8-4)
    [2012-07-29 17:00] installed json-c (0.9-1)
    [2012-07-29 17:00] installed libpulse (2.1-1)
    [2012-07-29 17:00] installed libtheora (1.1.1-2)
    [2012-07-29 17:00] installed libglapi (8.0.4-2)
    [2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
    [2012-07-29 17:00] installed libegl (8.0.4-2)
    [2012-07-29 17:00] installed libva (1.1.0-1)
    [2012-07-29 17:00] installed libvpx (1.1.0-1)
    [2012-07-29 17:00] installed opencore-amr (0.1.3-1)
    [2012-07-29 17:00] installed openjpeg (1.5.0-1)
    [2012-07-29 17:00] installed rtmpdump (2.4-1)
    [2012-07-29 17:00] installed schroedinger (1.0.11-1)
    [2012-07-29 17:00] installed speex (1.2rc1-2)
    [2012-07-29 17:00] installed x264 (20120705-1)
    [2012-07-29 17:00] installed xvidcore (1.3.2-1)
    [2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
    [2012-07-29 17:00] installed libmms (0.6.2-1)
    [2012-07-29 17:00] installed libzen (0.4.26-1)
    [2012-07-29 17:00] installed libmediainfo (0.7.58-1)
    [2012-07-29 17:00] installed recode (3.6-7)
    [2012-07-29 17:00] installed enca (1.13-2)
    [2012-07-29 17:00] installed a52dec (0.7.4-6)
    [2012-07-29 17:00] installed libdca (0.0.5-3)
    [2012-07-29 17:00] installed talloc (2.0.7-1)
    [2012-07-29 17:00] installed libwbclient (3.6.6-1)
    [2012-07-29 17:00] installed libcap-ng (0.6.6-1)
    [2012-07-29 17:00] installed cifs-utils (5.5-1)
    [2012-07-29 17:00] installed tdb (1.2.9-2)
    [2012-07-29 17:00] installed smbclient (3.6.6-1)
    [2012-07-29 17:00] installed libmad (0.15.1b-6)
    [2012-07-29 17:00] installed fribidi (0.19.2-2)
    [2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
    [2012-07-29 17:00] installed faac (1.28-4)
    [2012-07-29 17:00] installed faad2 (2.7-3)
    [2012-07-29 17:00] installed mpg123 (1.14.4-1)
    [2012-07-29 17:00] installed libass (0.10.0-3)
    [2012-07-29 17:00] installed libbluray (0.2.2-1)
    [2012-07-29 17:00] installed libcddb (1.3.2-3)
    [2012-07-29 17:00] installed libcdio (0.83-1)
    [2012-07-29 17:00] installed mencoder (35014-1)
    [2012-07-29 17:00] installed libftdi (0.20-1)
    [2012-07-29 17:00] installed libirman (0.4.5-3)
    [2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
    [2012-07-29 17:00] installed gpm (1.20.6-10)
    [2012-07-29 17:00] installed aalib (1.4rc5-9)
    [2012-07-29 17:00] installed jack (0.121.3-6)
    [2012-07-29 17:00] installed libcaca (0.99.beta18-1)
    [2012-07-29 17:00] installed xf86dgaproto (2.1-2)
    [2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
    [2012-07-29 17:00] installed mplayer (35014-1)
    [2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
    [2012-07-29 17:00] installed pms (1.60.0-1)
    [2012-07-29 17:20] Running 'pacman -S netstat'
    [2012-07-29 17:31] Running 'pacman -S ntfs-3g'
    [2012-07-29 17:31] installed fuse (2.9.0-1)
    [2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
    [2012-07-29 17:45] Running 'pacman -S tsmuxer'
    [2012-07-29 17:45] Running 'pacman -S tsMuxeR'
    [2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
    [2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
    [2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
    [2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
    [2012-07-29 17:48] The tsmuxer package is licensed software.
    [2012-07-29 17:48] You MUST read and agree to the license stored in
    [2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
    [2012-07-29 17:48] installed tsmuxer (1.10.6-12)
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
    [2012-07-29 18:24] Running 'pacman -S openjre'
    [2012-07-29 18:25] Running 'pacman -S jre'
    [2012-07-29 18:25] Running 'pacman -S icetea-plugin'
    [2012-07-29 18:27] Running 'pacman -S icedtea-web'
    [2012-07-29 18:27] installed icedtea-web (1.2-1)
    [2012-07-29 18:35] Running 'pacman -S ccache'
    [2012-07-29 18:35] installed ccache (3.1.7-1)
    [2012-07-29 18:50] Running 'pacman -S rtorrent'
    [2012-07-29 18:50] installed libsigc++ (2.2.10-2)
    [2012-07-29 18:50] installed libtorrent (0.13.2-2)
    [2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
    [2012-07-29 18:50] installed rtorrent (0.9.2-2)
    [2012-07-29 18:52] Running 'pacman -S rutorrent'
    [2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
    [2012-07-29 18:52] installed php (5.4.5-1)
    [2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 18:53] installed rutorrent (3.4-2)
    [2012-07-29 18:53] Running 'pacman -R rtorrent'
    [2012-07-29 18:53] removed rtorrent (0.9.2-2)
    [2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
    [2012-07-29 18:54] Running 'pacman -S rtorrent'
    [2012-07-29 18:54] installed rtorrent (0.9.2-2)
    [2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
    [2012-07-29 18:55] installed apr (1.4.6-1)
    [2012-07-29 18:55] installed unixodbc (2.3.1-1)
    [2012-07-29 18:55] installed apr-util (1.4.1-1)
    [2012-07-29 18:55] installed apache (2.2.22-4)
    [2012-07-29 18:55] installed php-apache (5.4.5-1)
    [2012-07-29 18:55] installed php-cgi (5.4.5-1)
    [2012-07-29 18:55] installed php-xsl (5.4.5-1)
    [2012-07-29 18:55] installed geoip-database (20120706-1)
    [2012-07-29 18:55] installed geoip (1.4.8-2)
    [2012-07-29 18:55] installed php-geoip (1.0.8-2)
    [2012-07-29 18:55] installed screen (4.0.3-13)
    [2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
    [2012-07-29 19:03] installed mod_scgi (1.14-1)
    [2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
    [2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
    [2012-07-29 19:46] Running 'pacman -S unrar unzip'
    [2012-07-29 19:46] installed unrar (4.2.4-1)
    [2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
    [2012-07-29 20:00] Running 'pacman -S php-apache mysql'
    [2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
    [2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
    [2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
    [2012-07-29 20:02] Installing MySQL system tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02] Filling help tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02]
    [2012-07-29 20:02] To start mysqld at boot time you have to copy
    [2012-07-29 20:02] support-files/mysql.server to the right place for your system
    [2012-07-29 20:02]
    [2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
    [2012-07-29 20:02] To do so, start the server, then issue the following commands:
    [2012-07-29 20:02]
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
    [2012-07-29 20:02]
    [2012-07-29 20:02] Alternatively you can run:
    [2012-07-29 20:02] /usr/bin/mysql_secure_installation
    [2012-07-29 20:02]
    [2012-07-29 20:02] which will also give you the option of removing the test
    [2012-07-29 20:02] databases and anonymous user created by default. This is
    [2012-07-29 20:02] strongly recommended for production servers.
    [2012-07-29 20:02]
    [2012-07-29 20:02] See the manual for more instructions.
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can start the MySQL daemon with:
    [2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
    [2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
    [2012-07-29 20:02]
    [2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
    [2012-07-29 20:02]
    [2012-07-29 20:02] installed mysql (5.5.25.a-1)
    [2012-07-29 20:49] Running 'pacman -Syyu'
    [2012-07-29 20:49] synchronizing package lists
    [2012-07-29 20:50] starting full system upgrade
    [2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
    [2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
    [2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
    [2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
    [2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
    [2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
    [2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
    [2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
    [2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
    [2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
    [2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
    [2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
    [2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
    [2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
    [2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
    [2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
    [2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
    [2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
    [2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
    [2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
    [2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
    [2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-29 20:52] ==> Building image from preset: 'default'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [autodetect]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] ==> Building image from preset: 'fallback'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
    [2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
    [2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
    [2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
    [2012-08-03 12:40] Running 'pacman -S filezilla'
    [2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
    [2012-08-03 12:40] installed libidn (1.25-1)
    [2012-08-03 12:40] installed filezilla (3.5.3-1)
    [2012-08-06 13:55] Running 'pacman -R openjdk'
    [2012-08-06 13:55] Running 'pacman -R openjdk6'
    [2012-08-06 13:55] Running 'pacman -R icedtea-web'
    [2012-08-06 13:55] removed icedtea-web (1.2-1)
    [2012-08-06 13:56] Running 'pacman -S jdk'
    [2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
    [2012-08-06 13:58]
    [2012-08-06 13:58] The jre package is licensed software.
    [2012-08-06 13:58] You MUST read and agree to the license stored in
    [2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
    [2012-08-06 13:58] Please relogin to include jre in your PATH.
    [2012-08-06 13:58]
    [2012-08-06 13:58] installed jre (7.5-2)
    [2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 14:01]
    [2012-08-06 14:01] The jdk package is licensed software.
    [2012-08-06 14:01] You MUST read and agree to the license stored in
    [2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
    [2012-08-06 14:01] Please relogin to include jdk in your PATH.
    [2012-08-06 14:01]
    [2012-08-06 14:01] installed jdk (7.5-2)
    [2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:15] Running 'pacman -R jdk jre'
    [2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
    [2012-08-06 14:17] removed jdk (7.5-2)
    [2012-08-06 14:17] removed jre (7.5-2)
    [2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:19] The jre package is licensed software.
    [2012-08-06 14:19] You MUST read and agree to the license stored in
    [2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
    [2012-08-06 14:19] Please relogin to include jre in your PATH.
    [2012-08-06 14:19] installed jre6 (6u33-b04)
    [2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:21] The jdk package is licensed software.
    [2012-08-06 14:21] You MUST read and agree to the license stored in
    [2012-08-06 14:21] /opt/java/LICENSE before using it.
    [2012-08-06 14:21] Please relogin to include jdk in your PATH
    [2012-08-06 14:21] installed jdk6 (6u33-b04)
    [2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
    [2012-08-06 17:23] Running 'pacman -S gimp'
    [2012-08-06 17:23] installed lcms (1.19-2)
    [2012-08-06 17:23] Updating font cache... done.
    [2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
    [2012-08-06 17:23] installed libwmf (0.2.8.4-9)
    [2012-08-06 17:23] installed libcroco (0.6.5-1)
    [2012-08-06 17:23] installed librsvg (2.36.1-1)
    [2012-08-06 17:23] installed babl (0.1.10-1)
    [2012-08-06 17:23] installed gegl (0.2.0-2)
    [2012-08-06 17:23] installed freeglut (2.8.0-1)
    [2012-08-06 17:23] installed jasper (1.900.1-7)
    [2012-08-06 17:23] installed gimp (2.8.0-2)
    [2012-08-06 18:25] Running 'pacman -Sy'
    [2012-08-06 18:25] synchronizing package lists
    [2012-08-06 18:25] Running 'pacman -S yaourt'
    [2012-08-06 18:28] Running 'pacman -Sy'
    [2012-08-06 18:28] synchronizing package lists
    [2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:29] Running 'pacman -Sy'
    [2012-08-06 18:29] synchronizing package lists
    [2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
    [2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
    [2012-08-06 21:51] removed jdk6 (6u33-b04)
    [2012-08-06 21:51] removed jre6 (6u33-b04)
    [2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
    [2012-08-06 21:54] The sun-java6 package is licensed software.
    [2012-08-06 21:54] You MUST read and agree to the license stored in
    [2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
    [2012-08-06 21:54]
    [2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
    [2012-08-06 21:54] installed sun-java6 (6u32-1)
    [2012-08-06 21:59] Running 'pacman -Syu'
    [2012-08-06 21:59] synchronizing package lists
    [2012-08-06 21:59] starting full system upgrade
    [2012-08-06 22:00] Running 'pacman -Sy'
    [2012-08-06 22:00] synchronizing package lists
    [2012-08-06 22:00] Running 'pacman -S yaourt'
    [2012-08-06 22:00] installed yajl (2.0.4-1)
    [2012-08-06 22:00] installed package-query (1.0.1-1)
    [2012-08-06 22:00] installed yaourt (1.1-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
    [2012-08-06 22:01] installed java-rhino (1.7R3-3)
    [2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
    [2012-08-06 22:01] when you use a non-reparenting window manager
    [2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-08-06 22:01] /etc/profile.d/jre.sh
    [2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:02] installed android-apktool (1.4.9-1)
    [2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-08-06 22:05] The android group has been removed, install android packages as root.
    [2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
    [2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
    [2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
    [2012-08-06 22:08] installed libmtp (1.1.3-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
    [2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
    [2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
    [2012-08-06 22:08] installed android-udev (1.3-4)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
    [2012-08-06 22:08] installed fastboot (20110628-2)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
    [2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
    [2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
    [2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
    [2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
    [2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
    [2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
    [2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
    [2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
    [2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
    [2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
    [2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
    [2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
    [2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
    [2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
    [2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
    [2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
    [2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
    [2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
    [2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
    [2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
    [2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
    [2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
    [2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
    [2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
    [2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
    [2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
    [2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
    [2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
    [2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
    [2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-08-06 22:20] ==> Building image from preset: 'default'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [autodetect]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] ==> Building image from preset: 'fallback'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
    [2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
    [2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
    [2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
    [2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
    [2012-08-06 22:23] Running 'pacman -S openjdk'
    [2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
    [2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
    [2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:25] Running 'pacman -R pms'
    [2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
    [2012-08-06 22:25] removed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:26] installed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -S vlc'
    [2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
    [2012-08-06 22:26] installed sdl_image (1.2.12-2)
    [2012-08-06 22:26] installed libdvdread (4.2.0-1)
    [2012-08-06 22:26] installed libdvdnav (4.2.0-2)
    [2012-08-06 22:26] installed libkate (0.4.1-3)
    [2012-08-06 22:26] installed libtiger (0.3.4-3)
    [2012-08-06 22:26] installed libebml (1.2.2-2)
    [2012-08-06 22:26] installed libmatroska (1.3.0-2)
    [2012-08-06 22:26] installed zvbi (0.2.33-4)
    [2012-08-06 22:26] installed taglib (1.7.2-2)
    [2012-08-06 22:26] installed libmpcdec (1.2.6-3)
    [2012-08-06 22:26] installed libupnp (1.6.17-1)
    [2012-08-06 22:26] installed libshout (1:2.3.0-1)
    [2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
    [2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
    [2012-08-06 22:26] installed ttf-freefont (20120503-1)
    [2012-08-06 22:26] installed vlc (2.0.3-2)
    [2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
    [2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
    [2012-08-07 11:44] installed pacman-color (4.0.3-1)
    [2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
    [2012-08-07 11:44] installed packer-color (20120807-1)
    [2012-08-07 11:50] Running 'pacman-color -S packer'
    [2012-08-07 15:50] Running 'pacman -Syyu'
    [2012-08-07 15:50] synchronizing package lists
    [2012-08-07 15:50] starting full system upgrade
    [2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
    [2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 16:02] Running 'pacman-color -S crontab'
    [2012-08-07 16:02] Running 'pacman-color -S cronjob'
    [2012-08-07 16:02] Running 'pacman-color -S cron'
    [2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
    [2012-08-07 16:04] Running 'pacman-color -S cronie'
    [2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
    [2012-08-07 16:05] installed libesmtp (1.0.6-2)
    [2012-08-07 16:05] installed esmtp (1.2-4)
    [2012-08-07 16:05] installed procmail (3.22-5)
    [2012-08-08 12:10] Running 'pacman -Sy'
    [2012-08-08 12:10] synchronizing package lists
    [2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -R pms'
    [2012-08-08 18:02] removed pms (1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -Sy'
    [2012-08-08 18:02] synchronizing package lists
    [2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 18:03] installed pms (1.60.0-2)
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
    [2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
    [2012-08-08 18:36] Running 'pacman -R pms'
    [2012-08-08 1

    shadowlurker wrote:
    It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
    auth sufficient pam_rootok.so
    auth required pam_unix.so
    account required pam_unix.so
    session required pam_unix.so
    password required pam_permit.so
    You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
    Doug piston had me try something that I think will help anyone else who has this problem.  Try re-installing pambase and shadow.  It generated back most of any I was missing.
    Last edited by shauder (2012-11-03 00:55:19)

  • [Solved] Problem with mouse cursor gnome3

    Hi
    I moved back to Archlinux after a brief stay in LMDE, and test the new GNOME3, I am unpleasantly surprised that after a while the mouse is moving himself toward the top of the screen. I searched the internet, and seems to be a problem with the gnome-shell for some time, but I am not able to find the solution.
    Momentarily solved by restarting gnome with ALT + F2 + r + Enter, but after a while, same thing happens again.
    Can be well with photography programs, but of course if you do not solve this issue, GNOME, I can not use
    Can you give me a helping hand?
    Thanks and regards
    Rafa
    Last edited by Warper4 (2011-08-16 18:09:50)

    I don't know about Gnome, but my laptop had that problem.  I tracked it down the 3d accelerometer being used to simulate a joystick.  Of course, I also had (previously) set up another joystick to operate as a mouse.  In the end, the cursor "drifted" when the laptop was not level
    YMMV

  • [SOLVED] Problem with Vuze and Java RE x86_64

    Hello all !
    First of all, sorry if this issue was posted before, but find no related issue similar to mine.
    Using pacman, I successfully installed JRE (version 6u16-1-x86_64) and Vuze (version 4.2.0.8-1, former Azureus), but Vuze doesn't want to start.
    Running the Vuze's executable in the gnome-terminal, I notice messages from vuze informing it can't find Java executable ("Java exec not found in PATH, starting auto-search..." AND "OOPS, unable to locate java exec in /usr/java/latest /usr/java /usr/lib/jvm/latest /usr/lib/jvm hierarchy") and therefore cannot start the Vuze UI. I also tried but failed in verify the version of Java with the command "java -version" due to command not found.
    What is the best approach to fix this problem with Java 64 bits?
    Thanks in advance
    Last edited by josephg (2009-09-28 18:55:56)

    peart wrote:Just log out and back in, most likely.  There are scripts in /etc/profile.d/ that need to be run to set up your java environment.  They get run automatically when you log in.
    Yep, perfect answer - issue solved. Thanks a lot!

  • [SOLVED] Problem with symlinking and PKGBUILD

    Hello Everyone,
    I have created the javafx-sdk package on AUR, and make the installation a lot simplier. But I am having a problem with the creationg of the symlink.
    So I have 1 binary file "javafxpackager" in the "bin" folder that I need to symlink into /usr/bin. This is the method I am using
    mkdir -p ${pkgdir}/usr/bin
    chmod +x ${pkgdir}/usr/lib/jvm/${pkgname}/bin/javafxpackager
    ln -s ${pkgdir}/usr/lib/jvm/${pkgname}/bin/javafxpackager ${pkgdir}/usr/bin/javafxpackager
    My problem is that this method doesn't work at all. The only way to me after the installation to make the symlink working is by doing this :
    ls chmod +x /usr/lib/jvm/javafx-sdk/bin/javafxpackager
    sudo ln -s /usr/lib/jvm/javafx-sdk/bin/javafxpackager /usr/bin/
    In order to make it work.
    How can I solve this problem ?
    Thanks in Advance,
    Luis Da Costa
    Last edited by aliasbody (2012-06-26 00:27:15)

    Problem solved ! Here's how to do it :
    mkdir -p ${pkgdir}/usr/bin
    chmod +x ${pkgdir}/usr/lib/jvm/${pkgname}/bin/javafxpackager
    ln -s /usr/lib/jvm/javafx-sdk/bin/javafxpackager ${pkgdir}/usr/bin/javafxpackager
    I didn't know, but you can symlink a file that doesn't exist yet, and this is what I did. I use and non existing (yet) javafxpackager binary from the non existing (yet) "/usr/lib/jvm/javafx-sdk/bin/" folder, and send it to the ${pkgdir}/usr/bin/javafxpackager, that will be copied into the original "/usr/bin/" folder.
    So this problem is solved and I'm happy
    (PS : thanks @ngoonee and @Trilby for you help ! Thanks to you I found out a little bit faster where the problem was ^^)

  • [SOLVED] Problem with "su" and "login".

    Hi, I reinstalled Arch Linux today when I updated "filesystem" and reboot appeared an error with root device, but I solved with installation CD.
    I restarted laptop after solving error with root device when I went to XFCE4 and open a terminal I tried to login as root with "su" and "su -" but showed this error:
    bash: su: command not found
    So I rebooted to start in text mode.
    When loaded SLIM I press ctrl+alt+F1 to enter text mode.
    I type root to login but did'nt appear to enter the pass, appeared again to enter login. I tried type my user but did the same.
    Someone can help me?
    Thanks!
    Last edited by surrealistic (2012-10-12 08:54:58)

    Thank you falconindy. I upgrade with --force because I search in Google the problem show "filesystem" when I tried install and I read that solution is upgrade "filesystem" with --foce.
    I tried to reinstall util-linux and now works. Thank you!

  • [SOLVED]problem with Bumblebee and Kernel 3.11-1-2

    Hi!
    I'm having problems with Bumblebee from Kernel 3.10 but I read that Kernel 3.11 solved the problem, I searched and tried possible solutions to my problem unsuccessfully
    The message shows me when I run "optirun":
    [ 5454.262739] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected.
    [ 5454.262776] [ERROR]Aborting because fallback start is disabled.
    I've tried with wiki's solutions, forums solutions...
    Configurations files:
    /etc/bumblebee/bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=virtualgl
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    /etc/bumblebee/xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    Option "AutoAddGPU" "false"
    EndSection
    Section "Device"
    Identifier "DiscreteNvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    # If the X server does not automatically detect your VGA device,
    # you can manually set it here.
    # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    # as you see in the commented example.
    # This Setting may be needed in some platforms with more than one
    # nvidia card, which may confuse the proprietary driver (e.g.,
    # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00.0"
    # Setting ProbeAllGpus to false prevents the new proprietary driver
    # instance spawned to try to control the integrated graphics card,
    # which is already being managed outside bumblebee.
    # This option doesn't hurt and it is required on platforms running
    # more than one nvidia graphics card with the proprietary driver.
    # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    # If this option is not set, the new Xorg may blacken the screen and
    # render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    lspci |grep NVIDIA:
    01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 640M] (rev a1)
    I hope can help me
    Thanks!
    Last edited by surrealistic (2013-11-04 18:46:35)

    My /var/log/Xorg.8.log:
    [ 337.161]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 337.161] X Protocol Version 11, Revision 0
    [ 337.161] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 337.161] Current Operating System: Linux h131h-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
    [ 337.161] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4eb69984-2228-4aba-9863-28a7fa854e51 rw quiet
    [ 337.161] Build Date: 01 November 2013 05:10:48PM
    [ 337.161]
    [ 337.161] Current version of pixman: 0.30.2
    [ 337.161] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 337.161] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 337.161] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 4 14:20:04 2013
    [ 337.161] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 337.161] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 337.161] (==) ServerLayout "Layout0"
    [ 337.161] (==) No screen section available. Using defaults.
    [ 337.161] (**) |-->Screen "Default Screen Section" (0)
    [ 337.161] (**) | |-->Monitor "<default monitor>"
    [ 337.161] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 337.161] (**) | |-->Device "DiscreteNvidia"
    [ 337.161] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 337.161] (**) Option "AutoAddDevices" "false"
    [ 337.161] (**) Option "AutoAddGPU" "false"
    [ 337.161] (**) Not automatically adding devices
    [ 337.161] (==) Automatically enabling devices
    [ 337.161] (**) Not automatically adding GPU devices
    [ 337.161] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 337.162] Entry deleted from font path.
    [ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 337.162] Entry deleted from font path.
    [ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 337.162] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 337.162] Entry deleted from font path.
    [ 337.162] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 337.162] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 337.162] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 337.162] (==) |-->Input Device "<default pointer>"
    [ 337.162] (==) |-->Input Device "<default keyboard>"
    [ 337.162] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 337.162] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 337.162] (II) Loader magic: 0x7fdc20
    [ 337.162] (II) Module ABI versions:
    [ 337.162] X.Org ANSI C Emulation: 0.4
    [ 337.162] X.Org Video Driver: 14.1
    [ 337.162] X.Org XInput driver : 19.1
    [ 337.162] X.Org Server Extension : 7.0
    [ 337.162] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 337.162] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 337.162] setversion 1.4 failed
    [ 337.163] (--) PCI:*(0:1:0:0) 10de:0fd2:1025:0648 rev 161, Mem @ 0xb2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128
    [ 337.163] Initializing built-in extension Generic Event Extension
    [ 337.163] Initializing built-in extension SHAPE
    [ 337.163] Initializing built-in extension MIT-SHM
    [ 337.163] Initializing built-in extension XInputExtension
    [ 337.163] Initializing built-in extension XTEST
    [ 337.163] Initializing built-in extension BIG-REQUESTS
    [ 337.163] Initializing built-in extension SYNC
    [ 337.163] Initializing built-in extension XKEYBOARD
    [ 337.163] Initializing built-in extension XC-MISC
    [ 337.163] Initializing built-in extension SECURITY
    [ 337.163] Initializing built-in extension XINERAMA
    [ 337.163] Initializing built-in extension XFIXES
    [ 337.163] Initializing built-in extension RENDER
    [ 337.163] Initializing built-in extension RANDR
    [ 337.164] Initializing built-in extension COMPOSITE
    [ 337.164] Initializing built-in extension DAMAGE
    [ 337.164] Initializing built-in extension MIT-SCREEN-SAVER
    [ 337.164] Initializing built-in extension DOUBLE-BUFFER
    [ 337.164] Initializing built-in extension RECORD
    [ 337.164] Initializing built-in extension DPMS
    [ 337.164] Initializing built-in extension X-Resource
    [ 337.164] Initializing built-in extension XVideo
    [ 337.164] Initializing built-in extension XVideo-MotionCompensation
    [ 337.164] Initializing built-in extension XFree86-VidModeExtension
    [ 337.164] Initializing built-in extension XFree86-DGA
    [ 337.164] Initializing built-in extension XFree86-DRI
    [ 337.164] Initializing built-in extension DRI2
    [ 337.164] (II) LoadModule: "glx"
    [ 337.164] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 337.172] (II) Module glx: vendor="NVIDIA Corporation"
    [ 337.172] compiled for 4.0.2, module version = 1.0.0
    [ 337.172] Module class: X.Org Server Extension
    [ 337.172] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 337.172] Loading extension GLX
    [ 337.172] (II) LoadModule: "nvidia"
    [ 337.172] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 337.172] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 337.172] compiled for 4.0.2, module version = 1.0.0
    [ 337.172] Module class: X.Org Video Driver
    [ 337.172] (II) LoadModule: "mouse"
    [ 337.172] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 337.172] (II) Module mouse: vendor="X.Org Foundation"
    [ 337.172] compiled for 1.14.0, module version = 1.9.0
    [ 337.172] Module class: X.Org XInput Driver
    [ 337.172] ABI class: X.Org XInput driver, version 19.1
    [ 337.172] (II) LoadModule: "kbd"
    [ 337.173] (WW) Warning, couldn't open module kbd
    [ 337.173] (II) UnloadModule: "kbd"
    [ 337.173] (II) Unloading kbd
    [ 337.173] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 337.173] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 337.173] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 337.173] (--) using VT number 1
    [ 337.173] (II) Loading sub module "fb"
    [ 337.173] (II) LoadModule: "fb"
    [ 337.173] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 337.173] (II) Module fb: vendor="X.Org Foundation"
    [ 337.173] compiled for 1.14.4, module version = 1.0.0
    [ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 337.173] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 337.173] (II) Loading sub module "wfb"
    [ 337.173] (II) LoadModule: "wfb"
    [ 337.173] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 337.173] (II) Module wfb: vendor="X.Org Foundation"
    [ 337.173] compiled for 1.14.4, module version = 1.0.0
    [ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 337.173] (II) Loading sub module "shadow"
    [ 337.173] (II) LoadModule: "shadow"
    [ 337.173] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 337.173] (II) Module shadow: vendor="X.Org Foundation"
    [ 337.173] compiled for 1.14.4, module version = 1.1.0
    [ 337.173] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 337.173] (II) Loading sub module "ramdac"
    [ 337.173] (II) LoadModule: "ramdac"
    [ 337.173] (II) Module "ramdac" already built-in
    [ 337.174] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 337.174] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 337.174] (==) NVIDIA(0): RGB weight 888
    [ 337.174] (==) NVIDIA(0): Default visual is TrueColor
    [ 337.174] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 337.174] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 337.174] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 337.174] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 337.174] (**) NVIDIA(0): Enabling 2D acceleration
    [ 337.174] (**) NVIDIA(0): Ignoring EDIDs
    [ 337.174] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 337.174] (**) NVIDIA(0): mode
    [ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 341.309] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 341.309] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 341.309] (EE) NVIDIA(0): README for additional information.
    [ 341.309] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 341.309] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 341.309] (II) UnloadModule: "nvidia"
    [ 341.309] (II) UnloadSubModule: "shadow"
    [ 341.309] (II) UnloadSubModule: "wfb"
    [ 341.309] (II) UnloadSubModule: "fb"
    [ 341.309] (EE) Screen(s) found, but none have a usable configuration.
    [ 341.309] (EE)
    Fatal server error:
    [ 341.309] (EE) no screens found(EE)
    [ 341.309] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 341.309] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 341.309] (EE)
    [ 341.309] (EE) Server terminated with error (1). Closing log file.
    dmesg |grep bbswitch:
    [ 13.570577] bbswitch: version 0.7
    [ 13.570585] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 13.570591] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 13.570687] bbswitch: detected an Optimus _DSM function
    [ 13.570741] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 13.572354] bbswitch: disabling discrete graphics
    [ 261.419114] bbswitch: enabling discrete graphics
    [ 278.445698] bbswitch: disabling discrete graphics
    [ 279.055257] bbswitch: enabling discrete graphics
    [ 286.292315] bbswitch: disabling discrete graphics
    [ 291.911052] bbswitch: enabling discrete graphics
    [ 310.011289] bbswitch: disabling discrete graphics
    [ 336.982794] bbswitch: enabling discrete graphics
    [ 349.526470] bbswitch: enabling discrete graphics
    I used "rcutree" option as shown in the post that you put, but I've deleted all changes made to use default configurations, because the solution of the post didn't work

  • [SOLVED] Problem with UTC and CST

    I probably made a mistake while installing Arch Linux and the clocks in my computer are all a mess.
    Right now the UTC time its 6+ hours, I changed it in the bios to the right hour but that give me -6 hours in the local time thats displayed in Arch Linux and gave me the right hour in Windows 7.
    timedatectl
    Local time: Fri 2013-12-20 12:33:12 CST
    Universal time: Fri 2013-12-20 18:33:12 UTC
             RTC time: Fri 2013-12-20 18:33:12
            Timezone: America/Mexico_City (CST, -0600)
         NTP enabled: yes
    NTP synchronized: yes
    RTC in local TZ: no
          DST active: no
    Last DST change: DST ended at
                      Sun 2013-10-27 01:59:59 CDT
                      Sun 2013-10-27 01:00:00 CST
    Next DST change: DST begins (the clock jumps one hour forward) at
                      Sun 2014-04-06 01:59:59 CST
                      Sun 2014-04-06 03:00:00 CDT
    PS: Already did everything in the wiki and tried with some [SOLVED] posts.
    Edit: The problem with this its that when i use Windows 7 (to play DotA... or using the iPod, since no player can edit the files in the ipod) the hour is 6+ hours, that causes problems with the configuration in the ipod since each time i connect it the clock (that its also my only clock) changes to 6+ hours. Its maybe irrelevant for someone but i would like to have the right hour in all my systems.
    Last edited by Senketsu (2013-12-20 19:16:54)

    I am with Scimmia, everything looks correct.   But, If you boot Windows, it will try to change the BIOS clock to local time unless you tell it otherwise.
    Edit for both of your edits.  Yes, fix windows
    Last edited by ewaller (2013-12-20 18:56:32)

  • [SOLVED] Problem with modules and udev

    Hi everybody,
    I've been configuring Arch on my new laptop the last few days and today as I was going to perform the first backup, I noticed that my external HDD does not show up in /dev/ when I plug it in. I figured it could be a problem with udev and the fact that in my /etc/rc.conf I use MOD_AUTOLOAD="no" with an explicit list of MODULES generated with hwdetect (as suggested in the wiki).
    To "solve" this I just changed MOD_AUTOLOAD to "yes" and after a reboot everything worked fine.
    My questions are:
    1) Is it possible to keep that feature (udev detects usb drives and creates the corresponding /dev/sdX) while having MOD_AUTOLOAD="no" ? What is/are the appropriate module(s) I have to put in my MODULES array ?
    2) What other such "basic" MODULES could be very useful that hwdetect does not tell about.
    Sorry for any English mistakes (I'm not a native speaker) and thank you in advance for your help,
    yms
    Last edited by yms (2010-01-06 12:48:20)

    1) Thank you, it works perfectly.
    2) Yes I know the question is weird. The thing is I have no precise idea at the moment and I just wanted to know if there are other very widely used features such as the one described in 1) that hwdetect ommits and that has to be loaded in MODULES.
    Anyway, thank you very much, I consider this matter [solved]

  • [SOLVED]Problem with packettracer and firefox

    Hi
    I've got a problem with firefox and packettracer.
    When i click on pka file in firefox, it don't open this file in packettracer but wants to save on disk. I've got a version 5.3.1-1 packettracer and latest version firefox.
    I don't know when problem was occured but last week everything was ok. I think that's either update. Meyby it's important that when i type in console:
    update-desktop-database /usr/share/mime
    i've got such errors:
    Unknown media type in type 'all/all'
    Unknown media type in type 'all/allfiles'
    Unknown media type in type 'uri/mms'
    Unknown media type in type 'uri/mmst'
    Unknown media type in type 'uri/mmsu'
    Unknown media type in type 'uri/pnm'
    Unknown media type in type 'uri/rtspt'
    Unknown media type in type 'uri/rtspu'
    Unknown media type in type 'fonts/package'
    Unknown media type in type 'interface/x-winamp-skin'
    i have installed kde 4.5.5-1
    Do you know some solution for my problem?
    edit: update firefox solve my problem
    Last edited by ElNinijo (2013-06-08 08:35:12)

    I've had this happen now and again. You can rebind the lease yourself with:
    $ dhcpcd --rebind
    You could also try increasing the timeout by adding
    TimeoutDHCP=
    to your netctl profile/s - see netctl.profile(5) as WonderWoofy suggests. Although I haven't tried the latter.
    Last edited by youngdm (2013-09-01 22:01:05)

  • [SOLVED]Problem with sound in HDMI

    Hello good society of Arch
    Now I have problems with sound from HDMI. I use Arch as an tvPc, wasting movies and tv shows on it. I use ALSA and it works well, except of a few files that I have, then there is picture but sound is either twisted or not played at all. It does not matter whether I use vlc or mplayer, I'm experiencing the same problem.
    I have not found anything about this with google, other problems have been either hdmi sound working or not, not like it is with me, sometimes it works and sometimes it don't.
    I know that the files are ok, I can play them in anther pc I have (also using Arch on that pc).
    Does anybody know what the problem might be? What do I have to look at to find out what the problem is? This have been like this for some time now, but I haven't looked into it before, because I don't use TV that muts, but the wife does and when she stats blaming Arch, I have too do something about it.
    I have never encountered problem with Arch that i cant solve by using this forum and google
    Thanks
    Last edited by Vaski (2010-08-21 01:08:42)

    cleanrock wrote:I noticed i got no audio over hdmi on some video file which had a low audio bitrate, i solved it by resampling the sound to 48000 in ~/.mplayer/config :
    af=resample=48000
    I will look at this when i come home from work, thanks.
    nTia89 wrote:have you already read our wiki ?
    Yes i have, and sound is working, well most of the time.

Maybe you are looking for

  • JBoss Rich Faces JDeveloper 11g TP 4

    Hello, I'm trying to configure JDeveloper 11g TP 4, to user JBoss Rich Faces JSF implementation for testing purpose. Here are the steps I did: 1 - Copied richfaces-api-3.2.1.GA.jar, richfaces-impl-3.2.1.GA.jar, richfaces-ui-3.2.1.GA.jar to the JDEV_H

  • Streaming to FMS via mobile cuts off

    Hi, I am using AIR on mobile for streaming a video from a VideoDisplay object to FMS (Flash Media Server) using NetConnection and NetStream. It's working, but 50% of the videos are being cut off in the middle. The FLV file on the server is small. Som

  • TNS:protocol adapter error while starting Listener created by Oracle SES11.1.2.2 Setup

    I am trying to install Oracle Secure Enterprise Search 11.1.2.2 on Windows 7 64-Bit Enterprise Edition. The machine has Oracle Client installed on it. Loopback adapter was configured. The setup created a Listener named LISTENER and SID is ASUSES. I a

  • Flex based app to html

    I have a current Flex based application and my boss want it to transfer to html/css based. Is it possible to do that easily? I mean if there is a plug-in or tool can do this conversion quicker. Already google but could not find one. What do you think

  • Why can't get gmail account to set up on iMac

    This morning I can't seem to get emails to download on my IMac.  I deleted the account and tried to reinstall and it still gives me the same message.  I went to the google account and made sure the server (IMAP) was entered correctly.  It worked fine