[Solved] Problem with mouse cursor gnome3
Hi
I moved back to Archlinux after a brief stay in LMDE, and test the new GNOME3, I am unpleasantly surprised that after a while the mouse is moving himself toward the top of the screen. I searched the internet, and seems to be a problem with the gnome-shell for some time, but I am not able to find the solution.
Momentarily solved by restarting gnome with ALT + F2 + r + Enter, but after a while, same thing happens again.
Can be well with photography programs, but of course if you do not solve this issue, GNOME, I can not use
Can you give me a helping hand?
Thanks and regards
Rafa
Last edited by Warper4 (2011-08-16 18:09:50)
I don't know about Gnome, but my laptop had that problem. I tracked it down the 3d accelerometer being used to simulate a joystick. Of course, I also had (previously) set up another joystick to operate as a mouse. In the end, the cursor "drifted" when the laptop was not level
YMMV
Similar Messages
-
[SOLVED] Problem with GDM and Gnome3
Okay, the Topic was more of a trick. Actually I'm havingt two seperate issues; I googled and such, but have not found anything that really answers my question.
First Issue:
I have my gdm.service enabled, so it starts on statup. I boot into runlevel 3. Now, whenever I type "startx" the screen becomes black, and after a while I come back into my TTY with something along the lines of "Stopping X server". But without any error, etc. It justs stops. When I know do a systemctl status on my gdm.service, I become that:
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: inactive (dead)
Feb 03 16:47:31 thunderlaptop gdm-simple-slave[475]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Feb 03 16:48:22 thunderlaptop gdm-password][623]: pam_unix(gdm-password:auth): authentication failure; logname=(unknown) uid=0 euid=0 tty=:0 ruser= rhost= user=thunderuser
Feb 03 16:48:33 thunderlaptop gdm-password][626]: pam_unix(gdm-password:session): session opened for user thunderuser by (unknown)(uid=0)
Feb 03 16:48:33 thunderlaptop gdm-simple-slave[475]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Feb 03 17:03:17 thunderlaptop systemd[1]: Stopping GNOME Display Manager...
Feb 03 17:03:17 thunderlaptop gdm-simple-slave[475]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Feb 03 17:03:17 thunderlaptop gdm-simple-slave[475]: WARNING: Child process 626 was already dead.
Feb 03 17:03:17 thunderlaptop gdm-simple-slave[475]: WARNING: Unable to kill session worker process
Feb 03 17:03:18 thunderlaptop gdm-simple-slave[475]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Feb 03 17:03:18 thunderlaptop systemd[1]: Stopped GNOME Display Manager.
After I start it, it puts me into the login screen and I can work just fine with Gnome3. I have no clue where the issuse might be.
The second is simple to explain - I have no Network symbol in the upper right corner, and Gnome3 says the network service is not compatible with my system.
Oh, and another issue. When I type something too long, the text does not start a new line in my console resulting in some Visual problems.
Thanks in advance.
Last edited by ThunderRush (2013-02-04 12:36:57)Blasphemist wrote:
Isn't GDM starting X and Gnome as it should for you? You shouldn't need to start X unless you want more than one X session. Is that what you are trying to do? After installing Gnome and Gnome-extra, I just use this command to enable GDM. systemctl enable gdm
What is your networking configuration. The beginners guide has been updated within the last week or two about this due to a change in network interface naming. Please give that a look.
Which console and shell are you using? Does it have a line wrap configuration option. This is normally automatic but those are my first questions.
Well, as I said, I start into runlevel 3 and want to start X by myself.
Yes, I realise that it is not wlan0 anymore, and I know the name of my wlan-interface. It works awesomely fine via wifi-menu <interface>, but gnome3 seems to have struggles? Have not found anything about that.
I'm using the gnome shell with bash. But the problem occours in a tty2 console as well. I guess it is a problem with .bashrc, but I have no idea what it might be.
Edit:
So, the fixes for the problems are...
1. Reinstall Linux. My Pam was fucked up somewhoe.
2. systemctl enable NetworkManager and not networkmanager. Please kill me.
3. I wrote the Colorcodes and escape-characters in a variable and used that in the actual PS1. That fixed it, and the guys over at bash suggest that too.
Last edited by ThunderRush (2013-02-04 12:36:42) -
Server 2008 crash - black screen with mouse cursor
dell poweredge 2950 with Perc 5/I RAID, ESXi 4.1 host, Windows Server 2008 R2 SP1 VM
After swapping out a failed raid5 drive this vm began displaying inpage operation error popups while checking folder permissions. event viewer errors:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.
chkdsk /r run from the win2k8r2sp1 install dvd command line resulted in more corrections than i was able to screenshot:
After this the server would only boot to black screen with mouse cursor. same black screen result in safe mode or directory services restore mode. sfc /scannow, startrep, and registry repair from the folder contents @ c:\windows\system32\config\regback
have been attempted with no improvement. I am still able to access the filesystem contents using the command line from the win2k8r2sp1 installation DVD - user + registry files copied over to another drive without problem and i was able to load
the registry hive on another system. This server was doing dns, domain controller and certification authority but the only important item is getting the CA back somehow. Any suggestions are welcome.Hi,
According the information you have provided, the file system is broken.
After the repair, do chkdsk /r and sfc /scannow give any warning or error?
If yes, it means that the file system and system file are not repaired. Please post the error or warning here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support -
Gnome Black Screen with Mouse Cursor after Login
I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.there are a lot of processess running... dunno killing which process will not cause a problem
here is the xorg log ( sorry i dont have much knowlegde to analyse it )
[ 2957.489]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 2957.493] X Protocol Version 11, Revision 0
[ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
[ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
[ 2957.497] Build Date: 21 September 2014 10:53:13AM
[ 2957.498]
[ 2957.499] Current version of pixman: 0.32.6
[ 2957.501] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
[ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2957.507] (==) No Layout section. Using the first Screen section.
[ 2957.507] (==) No screen section available. Using defaults.
[ 2957.507] (**) |-->Screen "Default Screen Section" (0)
[ 2957.507] (**) | |-->Monitor "<default monitor>"
[ 2957.507] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2957.507] (==) Automatically adding devices
[ 2957.507] (==) Automatically enabling devices
[ 2957.507] (==) Automatically adding GPU devices
[ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2957.507] Entry deleted from font path.
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2957.507] Entry deleted from font path.
[ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2957.507] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2957.507] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2957.507] (II) Loader magic: 0x818d80
[ 2957.507] (II) Module ABI versions:
[ 2957.507] X.Org ANSI C Emulation: 0.4
[ 2957.507] X.Org Video Driver: 18.0
[ 2957.507] X.Org XInput driver : 21.0
[ 2957.507] X.Org Server Extension : 8.0
[ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
[ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
[ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2957.512] (II) LoadModule: "glx"
[ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2957.514] (II) Module glx: vendor="X.Org Foundation"
[ 2957.514] compiled for 1.16.1, module version = 1.0.0
[ 2957.514] ABI class: X.Org Server Extension, version 8.0
[ 2957.514] (==) AIGLX enabled
[ 2957.514] (==) Matched intel as autoconfigured driver 0
[ 2957.514] (==) Matched intel as autoconfigured driver 1
[ 2957.514] (==) Matched modesetting as autoconfigured driver 2
[ 2957.514] (==) Matched fbdev as autoconfigured driver 3
[ 2957.514] (==) Matched vesa as autoconfigured driver 4
[ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
[ 2957.514] (II) LoadModule: "intel"
[ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2957.515] (II) Module intel: vendor="X.Org Foundation"
[ 2957.515] compiled for 1.16.1, module version = 2.99.916
[ 2957.515] Module class: X.Org Video Driver
[ 2957.515] ABI class: X.Org Video Driver, version 18.0
[ 2957.515] (II) LoadModule: "modesetting"
[ 2957.515] (WW) Warning, couldn't open module modesetting
[ 2957.515] (II) UnloadModule: "modesetting"
[ 2957.515] (II) Unloading modesetting
[ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "fbdev"
[ 2957.515] (WW) Warning, couldn't open module fbdev
[ 2957.515] (II) UnloadModule: "fbdev"
[ 2957.515] (II) Unloading fbdev
[ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2957.515] (II) LoadModule: "vesa"
[ 2957.515] (WW) Warning, couldn't open module vesa
[ 2957.515] (II) UnloadModule: "vesa"
[ 2957.515] (II) Unloading vesa
[ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 2957.516] (++) using VT number 1
[ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
[ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2957.517] (==) intel(0): RGB weight 888
[ 2957.517] (==) intel(0): Default visual is TrueColor
[ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
[ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 2957.517] (II) intel(0): Enabled output LVDS1
[ 2957.517] (II) intel(0): Output VGA1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VGA1
[ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output HDMI1
[ 2957.517] (II) intel(0): Output TV1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output TV1
[ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 2957.517] (II) intel(0): Enabled output VIRTUAL1
[ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[ 2957.517] (==) intel(0): TearFree disabled
[ 2957.517] (==) intel(0): DPI set to (96, 96)
[ 2957.517] (II) Loading sub module "dri2"
[ 2957.517] (II) LoadModule: "dri2"
[ 2957.517] (II) Module "dri2" already built-in
[ 2957.517] (II) Loading sub module "present"
[ 2957.517] (II) LoadModule: "present"
[ 2957.517] (II) Module "present" already built-in
[ 2957.517] (==) Depth 24 pixmap format is 32 bpp
[ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
[ 2957.518] (==) intel(0): Backing store enabled
[ 2957.518] (==) intel(0): Silken mouse enabled
[ 2957.518] (II) intel(0): HW Cursor enabled
[ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2957.518] (==) intel(0): DPMS enabled
[ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 2957.518] (II) intel(0): [DRI2] Setup complete
[ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
[ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
[ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
[ 2957.518] (II) intel(0): hardware support for Present enabled
[ 2957.518] (==) intel(0): display hotplug detection enabled
[ 2957.518] (--) RandR disabled
[ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
[ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2957.569] (II) AIGLX: Loaded and initialized i965
[ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
[ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2957.636] (II) LoadModule: "evdev"
[ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
[ 2957.637] compiled for 1.16.0, module version = 2.9.0
[ 2957.637] Module class: X.Org XInput Driver
[ 2957.637] ABI class: X.Org XInput driver, version 21.0
[ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
[ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
[ 2957.638] (**) Video Bus: always reports core events
[ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2957.638] (--) evdev: Video Bus: Found keys
[ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
[ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
[ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 2957.638] (**) Option "xkb_rules" "evdev"
[ 2957.638] (**) Option "xkb_model" "pc104"
[ 2957.638] (**) Option "xkb_layout" "us"
[ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
[ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
[ 2957.670] (**) Power Button: always reports core events
[ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2957.670] (--) evdev: Power Button: Found keys
[ 2957.670] (II) evdev: Power Button: Configuring as keyboard
[ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
[ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2957.670] (**) Option "xkb_rules" "evdev"
[ 2957.670] (**) Option "xkb_model" "pc104"
[ 2957.670] (**) Option "xkb_layout" "us"
[ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2957.671] (II) No input driver specified, ignoring this device.
[ 2957.671] (II) This device may have been added with another device file.
[ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2957.672] (**) Sleep Button: always reports core events
[ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2957.672] (--) evdev: Sleep Button: Found keys
[ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
[ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2957.672] (**) Option "xkb_rules" "evdev"
[ 2957.672] (**) Option "xkb_model" "pc104"
[ 2957.672] (**) Option "xkb_layout" "us"
[ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
[ 2957.673] (II) No input driver specified, ignoring this device.
[ 2957.673] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
[ 2957.674] (II) No input driver specified, ignoring this device.
[ 2957.674] (II) This device may have been added with another device file.
[ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
[ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
[ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2957.675] (**) Option "xkb_rules" "evdev"
[ 2957.675] (**) Option "xkb_model" "pc104"
[ 2957.675] (**) Option "xkb_layout" "us"
[ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 2957.675] (II) LoadModule: "synaptics"
[ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
[ 2957.676] compiled for 1.16.0, module version = 1.8.1
[ 2957.676] Module class: X.Org XInput Driver
[ 2957.676] ABI class: X.Org XInput driver, version 21.0
[ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
[ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.676] (**) Option "Device" "/dev/input/event11"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 2957.710] (**) Option "TapButton1" "1"
[ 2957.710] (**) Option "TapButton2" "2"
[ 2957.710] (**) Option "TapButton3" "3"
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
[ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
[ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
[ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 2957.712] (**) ALPS PS/2 Device: always reports core events
[ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
[ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
[ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
[ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2957.713] (II) No input driver specified, ignoring this device.
[ 2957.713] (II) This device may have been added with another device file.
[ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 2957.714] (**) Dell WMI hotkeys: always reports core events
[ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
[ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
[ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 2957.714] (**) Option "xkb_rules" "evdev"
[ 2957.714] (**) Option "xkb_model" "pc104"
[ 2957.714] (**) Option "xkb_layout" "us"
[ 2963.887] (II) evdev: Dell WMI hotkeys: Close
[ 2963.887] (II) UnloadModule: "evdev"
[ 2963.887] (II) systemd-logind: releasing fd for 13:69
[ 2963.949] (II) evdev: ALPS PS/2 Device: Close
[ 2963.950] (II) UnloadModule: "evdev"
[ 2963.950] (II) systemd-logind: releasing fd for 13:74
[ 2964.016] (II) UnloadModule: "synaptics"
[ 2964.016] (II) systemd-logind: releasing fd for 13:75
[ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2964.070] (II) UnloadModule: "evdev"
[ 2964.070] (II) systemd-logind: releasing fd for 13:64
[ 2964.123] (II) evdev: Sleep Button: Close
[ 2964.123] (II) UnloadModule: "evdev"
[ 2964.123] (II) systemd-logind: releasing fd for 13:67
[ 2964.156] (II) evdev: Power Button: Close
[ 2964.156] (II) UnloadModule: "evdev"
[ 2964.156] (II) systemd-logind: releasing fd for 13:66
[ 2964.183] (II) evdev: Video Bus: Close
[ 2964.183] (II) UnloadModule: "evdev"
[ 2964.183] (II) systemd-logind: releasing fd for 13:76
[ 2964.271] (EE) Server terminated successfully (0). Closing log file. -
I'm having a real problem with my cursor which seems to have developed a mind of its own, zigzagging allover, highlighting things without my command, and basically making my MacBook unusable (it's taken me half an hour just to compose this!).
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad or mouse, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
Having problem with mouse pionter in webpages
i have a problem with mouse pionter in webpages since i've updated my firefox .
when i'm reading a webpage and i click somewhere in the webpage,my mouse pointer goes from the normal pointer to the typing and selecting one. i also can not scroll up and down the page with up and down buttons on the keyboard because it goes straight to the top or the bottom of the page ! i only have this problem with mozilla firefox and it started when i updated my firefox about two months ago .thank you a lot madperson ! its okay now ! ;)
-
I'm having a problem with my cursor. It either disappears or I cannot see it immediately. Is there a way to make an adjustment on the display of the curse
reset SMC , also uncheck and check each setting on the cursor
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
When Apple solve problems with new iTunes calendar sync with windows and outlook?
When Apple solve problems with new iTunes calendar sync with windows and outlook?
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
More Info here...
Apple ID FAQs > http://support.apple.com/kb/HT5622
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
[SOLVED] log into KDE given a blank black screen with mouse cursor
hi,
noticed kwin using much higher cpu usage then normal, restarted KDE, everything seemed ok and then, while copying a file over to a samba share, my desktop went black with only a mouse cursor.
Restarted KDE, rebooted pc, reinstalled KDE (everything), xorg, nvidia, deleted xorg.conf created new user but nothing will give me my desktop back
once when i logged on, i had a kde crash report and messages on my widgets saying missing components. Tried to submit bug but missing debugging tools.
sometimes KDE won't log in at all.
forced an fsck on next boot with no errors found.
please help
thanks
EDIT: [solved] I had filled up my /var partition. cleaned pacman cache and all is good again. Phew!
Last edited by Fungyo (2009-12-07 08:10:40)Hi,
Have you tried the suggestion Cyber_Defend_Team provided?
If the issue persists, start the computer in Safe mode to check the result:
If it doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes. If a recently installed program, device, or driver prevents Windows from running correctly, you can start your computer
in safe mode and then remove the program that's causing the problem.
If it still in the safe mode, we may need to repair the installation with the recovery media.
In addition, please logon the problematic computer with the domain user account which works fine in other computer to test to see if it's the user account issue.
Karen Hu
TechNet Community Support -
[SOLVED] xfce-panel causing problems with mouse/touchpad
Since upgrading the packages below I mouseclicks occasionally do not work. Also scrolling using the scrollwheel and touchpad doesn't start sometimes. I determined it is not a problem with the mouse or touchpad because 'xev' shows the correct events firing. Also I see the icon change from arrow to hand when clicking.
<edit>
It appears that "xfce4-panel" is the cause. I use tint2 instead of xfce-panel, but the process running an empty panel is started by default and somehow interfered with mouse and touchpad events. solved it by removing it from the session, and comment it out in /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml
</edit>
[2011-01-19 21:39] synchronizing package lists
[2011-01-19 21:39] starting full system upgrade
[2011-01-19 21:57] upgraded libxfce4util (4.8.1-1 -> 4.8.1-1)
[2011-01-19 21:57] upgraded exo (0.6.0-2 -> 0.6.0-2)
[2011-01-19 21:57] Generating locales...
[2011-01-19 21:57] en_US.UTF-8... done
[2011-01-19 21:57] en_US.ISO-8859-1... done
[2011-01-19 21:57] nl_NL.UTF-8... done
[2011-01-19 21:57] nl_NL.ISO-8859-1... done
[2011-01-19 21:57] Generation complete.
[2011-01-19 21:57] upgraded glibc (2.12.2-2 -> 2.12.2-2)
[2011-01-19 21:57] upgraded x264 (20110115-1 -> 20110115-1)
[2011-01-19 21:57] upgraded ffmpeg (26387-1 -> 26387-1)
[2011-01-19 21:57] upgraded gdisk (0.6.14-1 -> 0.6.14-1)
[2011-01-19 21:57] upgraded gstreamer0.10-ugly (0.10.16-2 -> 0.10.16-2)
[2011-01-19 21:57] upgraded gstreamer0.10-ugly-plugins (0.10.16-2 -> 0.10.16-2)
[2011-01-19 21:57] upgraded gtk-xfce-engine (2.8.0-1 -> 2.8.0-1)
[2011-01-19 21:57] upgraded lib32-gcc-libs (4.5.2-4.2 -> 4.5.2-4.2)
[2011-01-19 21:57] upgraded libjpeg (8.3.0-1 -> 8.3.0-1)
[2011-01-19 21:57] upgraded xfconf (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:57] upgraded libxfcegui4 (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:57] upgraded mplayer (32792-1 -> 32792-1)
[2011-01-19 21:58] when you use a non-reparenting window manager
[2011-01-19 21:58] set _JAVA_AWT_WM_NONREPARENTING=1 in
[2011-01-19 21:58] /etc/profile.d/openjdk6.sh
[2011-01-19 21:58] upgraded openjdk6 (6.b20_1.9.4-1 -> 6.b20_1.9.4-1)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded openssh (5.6p1-2 -> 5.6p1-2)
[2011-01-19 21:58] upgraded pcre (8.12-1 -> 8.12-1)
[2011-01-19 21:58] upgraded terminal (0.4.5-2 -> 0.4.5-2)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded thunar (1.2.0-1 -> 1.2.0-1)
[2011-01-19 21:58] upgraded thunar-volman (0.6.0-1 -> 0.6.0-1)
[2011-01-19 21:58] upgraded udisks (1.0.2-2 -> 1.0.2-2)
[2011-01-19 21:58] upgraded vim-runtime (7.3.102-1 -> 7.3.102-1)
[2011-01-19 21:58] upgraded vim (7.3.102-1 -> 7.3.102-1)
[2011-01-19 21:58] upgraded vlc (1.1.5-3 -> 1.1.5-3)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded xfburn (0.4.3-3 -> 0.4.3-3)
[2011-01-19 21:58] upgraded xfce-utils (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] [2011-01-19 21:58] upgraded xfce4-appfinder (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-dev-tools (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-panel (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-mixer (4.6.1-2 -> 4.6.1-2)
[2011-01-19 21:58] upgraded xfce4-notifyd (0.2.0-1 -> 0.2.0-1)
[2011-01-19 21:58] upgraded xfce4-session (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfce4-settings (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfdesktop (4.8.0-1 -> 4.8.0-1)
[2011-01-19 21:58] upgraded xfwm4 (4.8.0-1 -> 4.8.0-1)
Last edited by rwd (2011-01-23 14:01:25)welcome to macbook forum.
try this link:
http://docs.info.apple.com/article.html?artnum=17228
and open your system preference / keyboard and mouse / trackpad tab / and changed the preference (double clicking speed, etc) as you like and try it.
Good Luck. -
Vista Home Premium: Following install, black screen with mouse cursor
I have tried installing with Boot Camp (v2.0) twice now with the same result.
After the install is complete, the mac reboots into windows. I should see the Vista welcome screen but instead I get the black screen with a mouse cursor. The mouse is functional but clearly not much use!
A subsequent reboot brings up the options for restarting following an unclean shutdown of windows. Running in safe mode, the restart hangs. The last dll loaded was crcdisk.
I am running an OEM version - once activated (assuming I ever get that far) - the installation will be locked to the mac... which is fine.
Googling the problem reveals some early Vista beta issues with graphics that caused a similar problem. Does Vista have an issue with the 8800GT that is fitted in my Mac?
Any help/ideas/suggestions/fixes much appreciated. Rather stumped.
I would load up XP Pro but I dont have an installer with SP2 :/Well my problem turns out to be a bad disk. I added two seagate 7200.11 750GB drives. Once which was making ominous ticking sounds. Vista took an age to install and really, I should have caught on earlier.
When I got a bunch of disk i/o errors creating a Fusion VM of XP Pro I decided to remove the disk and to try the other unit.
Vista installed very rapidly indeed and worked. Yes worked.
Hurrah! Problem solved.
Time to see about replacing that disk... -
Problems with mouse buttons after update
In recent days, for no apparent reason, I am experiencing problems with the mouse. The right button is set to right-click does not work and the role of the side buttons have also changed. A friend who also has a similar iMac is experienced problems from the day. ¿Could anybody help me? Thanks.
These are the lates Software Update lines in install.log file:
Jun 23 11:00:53 ebd40 Software Update[97005]: JS: 10.5.8
Jun 23 11:00:53 ebd40 Software Update[97005]: JS: 10.5.8
Jun 23 11:00:57 ebd40 Software Update[97005]: Found receipt (name match) for (RemoteDesktopClient / b): (RemoteDesktopClient / com.apple.pkg.RemoteDesktopClient)
Jun 23 11:00:57 ebd40 Software Update[97005]: Found receipt (name match) for (RemoteDesktopClient / client): (RemoteDesktopClient / com.apple.pkg.RemoteDesktopClient)
Jun 23 11:00:57 ebd40 Software Update[97005]: Found receipt (name match) for (RemoteDesktopClient / client_auto): (RemoteDesktopClient / com.apple.pkg.RemoteDesktopClient)
Jun 23 11:00:57 ebd40 Software Update[97005]: Found receipt (name match) for (AirPortUtility / a): (AirPortUtility / com.apple.pkg.AirPortUtility)
Jun 23 11:00:58 ebd40 Software Update[97005]: Found receipt (name match) for (RAWCameraUpdate3 / RAWCameraUpdate3Leopard): (RAWCameraUpdate3 / com.apple.pkg.RAWCameraUpdate3)
Jun 23 11:00:58 ebd40 Software Update[97005]: Found receipt (name match) for (RAWCameraUpdate3 / RAWCameraUpdate3): (RAWCameraUpdate3 / com.apple.pkg.RAWCameraUpdate3)
Jun 23 11:00:59 ebd40 Software Update[97005]: Package Authoring Error: installation-check results requires a message
Jun 23 11:01:00 ebd40 Software Update[97005]: Found receipt (name match) for (AppleIntermediateCodec / auto): (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec)
Jun 23 11:01:00 ebd40 Software Update[97005]: JS: model = iMac9,1
Jun 23 11:01:01 ebd40 Software Update[97005]: JS: 10.5.8
Jun 23 11:01:04 ebd40 Software Update[97005]: JS: Firmware is up to date.
Jun 23 11:01:04 ebd40 Software Update[97005]: __choice_su_visible returned wrong type (CFArray: (\n))
Jun 23 11:01:06 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4050 Series
Jun 23 11:01:06 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4050 Series
Jun 23 11:01:06 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4250
Jun 23 11:01:06 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4250
Jun 23 11:01:06 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP Color LaserJet 4650
Jun 23 11:01:06 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP Color LaserJet 4650
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Printer HP_Laserjet does not require an update.
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4050 Series
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4050 Series
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4250
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4250
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP Color LaserJet 4650
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP Color LaserJet 4650
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Printer HP_Laserjet does not require an update.
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4050 Series
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4050 Series
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4250
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4250
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP Color LaserJet 4650
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP Color LaserJet 4650
Jun 23 11:01:09 ebd40 Software Update[97005]: JS: Printer HP_Laserjet does not require an update.
Jun 23 11:01:10 ebd40 Software Update[97005]: Found receipt (name match) for (FrontRowUpdate2.1.7 / auto): (FrontRowUpdate2.1.7 / com.apple.pkg.FrontRowUpdate2.1.7)
Jun 23 11:01:10 ebd40 Software Update[97005]: Found receipt (name match) for (iDVD_704 / auto): (iDVD_704 / com.apple.pkg.iDVD_704)
Jun 23 11:01:11 ebd40 Software Update[97005]: JS: 10.5.8
Jun 23 11:01:13 ebd40 Software Update[97005]: Found receipt (full match) for (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec): (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec)
Jun 23 11:01:13 ebd40 Software Update[97005]: Found receipt (name match) for (AppleIntermediateCodec / autoAppleIntermediateCodec): (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec)
Jun 23 11:01:14 ebd40 Software Update[97005]: __choice_su_visible returned wrong type (CFArray: (\n))
Jun 23 11:01:14 ebd40 Software Update[97005]: Found receipt (name match) for (CoreFP / CoreFP): (CoreFP / com.apple.pkg.CoreFP)
Jun 23 11:01:14 ebd40 Software Update[97005]: Found receipt (name match) for (iTunesAccess / iTunesAccess): (iTunesAccess / com.apple.pkg.iTunesAccess)
Jun 23 11:01:14 ebd40 Software Update[97005]: Found receipt (name match) for (iTunesX / iTunes): (iTunesX / com.apple.pkg.iTunesX)
Jun 23 11:01:14 ebd40 Software Update[97005]: Found receipt (name match) for (AppleMobileDeviceSupport / amds): (AppleMobileDeviceSupport / com.apple.pkg.AppleMobileDeviceSupport)
Jun 30 11:01:12 ebd40 Software Update[48505]: JS: 10.5.8
Jun 30 11:01:12 ebd40 Software Update[48505]: JS: 10.5.8
Jun 30 11:01:15 ebd40 Software Update[48505]: Found receipt (name match) for (RemoteDesktopClient / b): (RemoteDesktopClient / com.apple.pkg.RemoteDesktopClient)
Jun 30 11:01:16 ebd40 Software Update[48505]: Found receipt (name match) for (RemoteDesktopClient / client): (RemoteDesktopClient / com.apple.pkg.RemoteDesktopClient)
Jun 30 11:01:16 ebd40 Software Update[48505]: Found receipt (name match) for (RemoteDesktopClient / client_auto): (RemoteDesktopClient / com.apple.pkg.RemoteDesktopClient)
Jun 30 11:01:16 ebd40 Software Update[48505]: Found receipt (name match) for (AirPortUtility / a): (AirPortUtility / com.apple.pkg.AirPortUtility)
Jun 30 11:01:17 ebd40 Software Update[48505]: Found receipt (name match) for (RAWCameraUpdate3 / RAWCameraUpdate3Leopard): (RAWCameraUpdate3 / com.apple.pkg.RAWCameraUpdate3)
Jun 30 11:01:17 ebd40 Software Update[48505]: Found receipt (name match) for (RAWCameraUpdate3 / RAWCameraUpdate3): (RAWCameraUpdate3 / com.apple.pkg.RAWCameraUpdate3)
Jun 30 11:01:18 ebd40 Software Update[48505]: Package Authoring Error: installation-check results requires a message
Jun 30 11:01:19 ebd40 Software Update[48505]: Found receipt (name match) for (AppleIntermediateCodec / auto): (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec)
Jun 30 11:01:19 ebd40 Software Update[48505]: JS: model = iMac9,1
Jun 30 11:01:21 ebd40 Software Update[48505]: JS: 10.5.8
Jun 30 11:01:23 ebd40 Software Update[48505]: JS: Firmware is up to date.
Jun 30 11:01:24 ebd40 Software Update[48505]: __choice_su_visible returned wrong type (CFArray: (\n))
Jun 30 11:01:26 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4050 Series
Jun 30 11:01:26 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4050 Series
Jun 30 11:01:26 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4250
Jun 30 11:01:26 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4250
Jun 30 11:01:26 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP Color LaserJet 4650
Jun 30 11:01:26 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP Color LaserJet 4650
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Printer HP_Laserjet does not require an update.
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4050 Series
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4050 Series
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4250
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4250
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP Color LaserJet 4650
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP Color LaserJet 4650
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Printer HP_Laserjet does not require an update.
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4050 Series
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4050 Series
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP LaserJet 4250
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP LaserJet 4250
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HP;MODEL:HP Color LaserJet 4650
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Connected printer: MANUFACTURER:HEWLETT-PACKARD;MODEL:HP Color LaserJet 4650
Jun 30 11:01:31 ebd40 Software Update[48505]: JS: Printer HP_Laserjet does not require an update.
Jun 30 11:01:32 ebd40 Software Update[48505]: Found receipt (name match) for (FrontRowUpdate2.1.7 / auto): (FrontRowUpdate2.1.7 / com.apple.pkg.FrontRowUpdate2.1.7)
Jun 30 11:01:32 ebd40 Software Update[48505]: Found receipt (name match) for (iDVD_704 / auto): (iDVD_704 / com.apple.pkg.iDVD_704)
Jun 30 11:01:34 ebd40 Software Update[48505]: JS: 10.5.8
Jun 30 11:01:35 ebd40 Software Update[48505]: Found receipt (name match) for (AppleIntermediateCodec / autoAppleIntermediateCodec): (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec)
Jun 30 11:01:35 ebd40 Software Update[48505]: Found receipt (full match) for (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec): (AppleIntermediateCodec / com.apple.pkg.AppleIntermediateCodec)
Jun 30 11:01:37 ebd40 Software Update[48505]: __choice_su_visible returned wrong type (CFArray: (\n))
Jun 30 11:01:37 ebd40 Software Update[48505]: Found receipt (name match) for (iTunesX / iTunes): (iTunesX / com.apple.pkg.iTunesX)
Jun 30 11:01:37 ebd40 Software Update[48505]: Found receipt (name match) for (AppleMobileDeviceSupport / amds): (AppleMobileDeviceSupport / com.apple.pkg.AppleMobileDeviceSupport)
Jun 30 11:01:37 ebd40 Software Update[48505]: Found receipt (name match) for (iTunesAccess / iTunesAccess): (iTunesAccess / com.apple.pkg.iTunesAccess)
Jun 30 11:01:37 ebd40 Software Update[48505]: Found receipt (name match) for (CoreFP / CoreFP): (CoreFP / com.apple.pkg.CoreFP)
Thanks.Blank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser -
New Install - startx results in blank screen with mouse cursor
I installed Arch on my desktop last week with no issues, so I wanted to install it on an old THinkpad R31. Everything with the installation went smooth, but when I try to 'startx' all I get is a blank screen with a mouse cursor that I can move around. I've installed xorg-xinit, xorg-twm, xorg-xclock, and xterm.
I'm not getting any significant errors in the logs, or even the terminal I issue 'startx' in.
I'm not sure what the problem could be...
Here is my output from 'startx'
X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH i686
Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
Build Date: 05 October 2012 02:01:30PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
after 554 requests (554 known processed) with 0 events remaining.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
And my Xorg.0.log
[ 4955.478]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4955.479] X Protocol Version 11, Revision 0
[ 4955.479] Build Operating System: Linux 3.6.0-1-ARCH i686
[ 4955.479] Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
[ 4955.479] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
[ 4955.479] Build Date: 05 October 2012 02:01:30PM
[ 4955.479]
[ 4955.479] Current version of pixman: 0.26.2
[ 4955.479] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4955.479] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4955.480] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 09:26:12 2012
[ 4955.480] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4955.480] (==) No Layout section. Using the first Screen section.
[ 4955.480] (==) No screen section available. Using defaults.
[ 4955.480] (**) |-->Screen "Default Screen Section" (0)
[ 4955.480] (**) | |-->Monitor "<default monitor>"
[ 4955.481] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4955.481] (==) Automatically adding devices
[ 4955.481] (==) Automatically enabling devices
[ 4955.481] (==) Automatically adding GPU devices
[ 4955.481] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4955.481] Entry deleted from font path.
[ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4955.481] Entry deleted from font path.
[ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4955.481] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4955.481] Entry deleted from font path.
[ 4955.481] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4955.481] (==) FontPath set to:
/usr/share/fonts/misc/
[ 4955.481] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4955.481] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4955.481] (II) Loader magic: 0x825a620
[ 4955.482] (II) Module ABI versions:
[ 4955.482] X.Org ANSI C Emulation: 0.4
[ 4955.482] X.Org Video Driver: 13.0
[ 4955.482] X.Org XInput driver : 18.0
[ 4955.482] X.Org Server Extension : 7.0
[ 4955.484] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4955.486] (--) PCI:*(0:0:2:0) 8086:3577:1014:0505 rev 4, Mem @ 0x98000000/134217728, 0x90100000/524288
[ 4955.486] (--) PCI: (0:0:2:1) 8086:3577:1014:0505 rev 0, Mem @ 0x88000000/134217728, 0x80200000/524288
[ 4955.486] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4955.486] Initializing built-in extension Generic Event Extension
[ 4955.486] Initializing built-in extension SHAPE
[ 4955.486] Initializing built-in extension MIT-SHM
[ 4955.486] Initializing built-in extension XInputExtension
[ 4955.486] Initializing built-in extension XTEST
[ 4955.486] Initializing built-in extension BIG-REQUESTS
[ 4955.486] Initializing built-in extension SYNC
[ 4955.487] Initializing built-in extension XKEYBOARD
[ 4955.487] Initializing built-in extension XC-MISC
[ 4955.487] Initializing built-in extension SECURITY
[ 4955.487] Initializing built-in extension XINERAMA
[ 4955.487] Initializing built-in extension XFIXES
[ 4955.487] Initializing built-in extension RENDER
[ 4955.487] Initializing built-in extension RANDR
[ 4955.487] Initializing built-in extension COMPOSITE
[ 4955.487] Initializing built-in extension DAMAGE
[ 4955.487] Initializing built-in extension MIT-SCREEN-SAVER
[ 4955.487] Initializing built-in extension DOUBLE-BUFFER
[ 4955.487] Initializing built-in extension RECORD
[ 4955.487] Initializing built-in extension DPMS
[ 4955.487] Initializing built-in extension X-Resource
[ 4955.487] Initializing built-in extension XVideo
[ 4955.487] Initializing built-in extension XVideo-MotionCompensation
[ 4955.487] Initializing built-in extension XFree86-VidModeExtension
[ 4955.487] Initializing built-in extension XFree86-DGA
[ 4955.487] Initializing built-in extension XFree86-DRI
[ 4955.487] Initializing built-in extension DRI2
[ 4955.487] (II) LoadModule: "glx"
[ 4955.488] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4955.489] (II) Module glx: vendor="X.Org Foundation"
[ 4955.489] compiled for 1.13.0, module version = 1.0.0
[ 4955.489] ABI class: X.Org Server Extension, version 7.0
[ 4955.489] (==) AIGLX enabled
[ 4955.489] Loading extension GLX
[ 4955.489] (==) Matched intel as autoconfigured driver 0
[ 4955.489] (==) Matched intel as autoconfigured driver 1
[ 4955.489] (==) Matched vesa as autoconfigured driver 2
[ 4955.489] (==) Matched modesetting as autoconfigured driver 3
[ 4955.489] (==) Matched fbdev as autoconfigured driver 4
[ 4955.489] (==) Assigned the driver to the xf86ConfigLayout
[ 4955.489] (II) LoadModule: "intel"
[ 4955.490] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4955.491] (II) Module intel: vendor="X.Org Foundation"
[ 4955.491] compiled for 1.13.0, module version = 2.20.9
[ 4955.491] Module class: X.Org Video Driver
[ 4955.491] ABI class: X.Org Video Driver, version 13.0
[ 4955.491] (II) LoadModule: "vesa"
[ 4955.491] (WW) Warning, couldn't open module vesa
[ 4955.491] (II) UnloadModule: "vesa"
[ 4955.492] (II) Unloading vesa
[ 4955.492] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4955.492] (II) LoadModule: "modesetting"
[ 4955.492] (WW) Warning, couldn't open module modesetting
[ 4955.492] (II) UnloadModule: "modesetting"
[ 4955.492] (II) Unloading modesetting
[ 4955.492] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4955.493] (II) LoadModule: "fbdev"
[ 4955.493] (WW) Warning, couldn't open module fbdev
[ 4955.493] (II) UnloadModule: "fbdev"
[ 4955.493] (II) Unloading fbdev
[ 4955.493] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4955.493] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 4955.496] (--) using VT number 7
[ 4955.508] (II) intel(0): using device path '/dev/dri/card0'
[ 4955.509] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4955.509] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4955.509] (==) intel(0): RGB weight 888
[ 4955.509] (==) intel(0): Default visual is TrueColor
[ 4955.509] (--) intel(0): Integrated Graphics Chipset: Intel(R) i830M
[ 4955.509] (**) intel(0): Relaxed fencing disabled
[ 4955.509] (**) intel(0): Wait on SwapBuffers? enabled
[ 4955.509] (**) intel(0): Triple buffering? enabled
[ 4955.509] (**) intel(0): Framebuffer tiled
[ 4955.510] (**) intel(0): Pixmaps tiled
[ 4955.510] (**) intel(0): 3D buffers tiled
[ 4955.510] (**) intel(0): SwapBuffers wait enabled
[ 4955.510] (==) intel(0): video overlay key set to 0x101fe
[ 4955.593] (II) intel(0): Output VGA1 has no monitor section
[ 4955.593] (II) intel(0): Output LVDS1 has no monitor section
[ 4955.594] (--) intel(0): found backlight control interface /sys/class/backlight/thinkpad_screen
[ 4955.676] (II) intel(0): EDID for output VGA1
[ 4955.677] (II) intel(0): Printing probed modes for output VGA1
[ 4955.677] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4955.677] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4955.677] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4955.677] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 4955.677] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 4955.677] (II) intel(0): EDID for output LVDS1
[ 4955.677] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4955.677] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4955.678] (II) intel(0): Printing probed modes for output LVDS1
[ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz P)
[ 4955.678] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 4955.678] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 4955.678] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 4955.678] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 4955.678] (II) intel(0): Output VGA1 connected
[ 4955.678] (II) intel(0): Output LVDS1 connected
[ 4955.678] (II) intel(0): Using exact sizes for initial modes
[ 4955.678] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 4955.678] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 4955.678] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4955.678] (II) intel(0): Kernel page flipping support detected, enabling
[ 4955.678] (==) intel(0): DPI set to (96, 96)
[ 4955.678] (II) Loading sub module "fb"
[ 4955.678] (II) LoadModule: "fb"
[ 4955.679] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4955.679] (II) Module fb: vendor="X.Org Foundation"
[ 4955.679] compiled for 1.13.0, module version = 1.0.0
[ 4955.679] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4955.679] (II) Loading sub module "dri2"
[ 4955.679] (II) LoadModule: "dri2"
[ 4955.680] (II) Module "dri2" already built-in
[ 4955.680] (==) Depth 24 pixmap format is 32 bpp
[ 4955.680] (II) intel(0): [DRI2] Setup complete
[ 4955.680] (II) intel(0): [DRI2] DRI driver: i915
[ 4955.680] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 4955.680] (II) UXA(0): Driver registered support for the following operations:
[ 4955.680] (II) solid
[ 4955.680] (II) copy
[ 4955.680] (II) composite (RENDER acceleration)
[ 4955.680] (II) put_image
[ 4955.680] (II) get_image
[ 4955.680] (==) intel(0): Backing store disabled
[ 4955.680] (==) intel(0): Silken mouse enabled
[ 4955.681] (II) intel(0): Initializing HW Cursor
[ 4955.681] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4955.684] (==) intel(0): DPMS enabled
[ 4955.684] (==) intel(0): Intel XvMC decoder disabled
[ 4955.684] (II) intel(0): Set up overlay video
[ 4955.684] (II) intel(0): direct rendering: DRI2 Enabled
[ 4955.684] (==) intel(0): hotplug detection: "enabled"
[ 4955.983] (--) RandR disabled
[ 4956.021] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4956.021] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context
[ 4956.021] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 4956.021] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 4956.021] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4956.021] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4956.021] (II) AIGLX: Loaded and initialized i915
[ 4956.022] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4956.023] (II) intel(0): Setting screen physical size to 270 x 203
[ 4956.124] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 4956.124] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4956.124] (II) LoadModule: "evdev"
[ 4956.124] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4956.125] (II) Module evdev: vendor="X.Org Foundation"
[ 4956.125] compiled for 1.13.0, module version = 2.7.3
[ 4956.125] Module class: X.Org XInput Driver
[ 4956.125] ABI class: X.Org XInput driver, version 18.0
[ 4956.125] (II) Using input driver 'evdev' for 'Power Button'
[ 4956.125] (**) Power Button: always reports core events
[ 4956.125] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 4956.126] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4956.126] (--) evdev: Power Button: Found keys
[ 4956.126] (II) evdev: Power Button: Configuring as keyboard
[ 4956.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4956.126] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4956.126] (**) Option "xkb_rules" "evdev"
[ 4956.126] (**) Option "xkb_model" "evdev"
[ 4956.126] (**) Option "xkb_layout" "us"
[ 4956.197] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 4956.198] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4956.198] (II) Using input driver 'evdev' for 'Video Bus'
[ 4956.198] (**) Video Bus: always reports core events
[ 4956.198] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 4956.198] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 4956.198] (--) evdev: Video Bus: Found keys
[ 4956.198] (II) evdev: Video Bus: Configuring as keyboard
[ 4956.198] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2/event2"
[ 4956.198] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 4956.198] (**) Option "xkb_rules" "evdev"
[ 4956.198] (**) Option "xkb_model" "evdev"
[ 4956.198] (**) Option "xkb_layout" "us"
[ 4956.200] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 4956.200] (II) No input driver specified, ignoring this device.
[ 4956.200] (II) This device may have been added with another device file.
[ 4956.201] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 4956.201] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4956.201] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4956.202] (**) Sleep Button: always reports core events
[ 4956.202] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 4956.202] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4956.202] (--) evdev: Sleep Button: Found keys
[ 4956.202] (II) evdev: Sleep Button: Configuring as keyboard
[ 4956.202] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 4956.202] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 4956.202] (**) Option "xkb_rules" "evdev"
[ 4956.202] (**) Option "xkb_model" "evdev"
[ 4956.202] (**) Option "xkb_layout" "us"
[ 4956.204] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4956.205] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4956.205] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4956.205] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4956.205] (**) AT Translated Set 2 keyboard: always reports core events
[ 4956.205] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4956.205] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4956.205] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4956.205] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4956.205] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 4956.205] (**) Option "xkb_rules" "evdev"
[ 4956.206] (**) Option "xkb_model" "evdev"
[ 4956.206] (**) Option "xkb_layout" "us"
[ 4956.208] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 4956.208] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 4956.208] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 4956.208] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 4956.208] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 4956.208] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 4956.208] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4956.208] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 4956.208] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 10)
[ 4956.209] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 4956.209] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 4956.210] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[ 4956.210] (II) No input driver specified, ignoring this device.
[ 4956.210] (II) This device may have been added with another device file.
[ 4956.211] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 4956.211] (II) No input driver specified, ignoring this device.
[ 4956.211] (II) This device may have been added with another device file.
[ 4956.213] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 4956.213] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 4956.213] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 4956.213] (**) ThinkPad Extra Buttons: always reports core events
[ 4956.213] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
[ 4956.214] (--) evdev: ThinkPad Extra Buttons: Vendor 0x1014 Product 0x5054
[ 4956.214] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 4956.214] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 4956.214] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event7"
[ 4956.214] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
[ 4956.214] (**) Option "xkb_rules" "evdev"
[ 4956.214] (**) Option "xkb_model" "evdev"
[ 4956.214] (**) Option "xkb_layout" "us"
[ 4960.630] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4964.186] (II) evdev: ThinkPad Extra Buttons: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: AT Translated Set 2 keyboard: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: Sleep Button: Close
[ 4964.189] (II) UnloadModule: "evdev"
[ 4964.189] (II) evdev: Video Bus: Close
[ 4964.190] (II) UnloadModule: "evdev"
[ 4964.190] (II) evdev: Power Button: Close
[ 4964.190] (II) UnloadModule: "evdev"
[ 4964.192] Server terminated successfully (0). Closing log file.karol wrote:
Leonid.I wrote:@0x001A4:
To run twm, you need to install xorg-twm from [extra] (I am not sure if it installs by default). Do you have xterm installed?
According to his first post he has both xorg-twm and xterm installed.
I do indeed.
I went ahead and installed LXDE anyways, just to see what would happen. Exact same thing, it looks like everything is about to load but only the mouse cursor shows up. My Xorg.0.log is the same, so I won't post it again.
I do get an error in the console about the openbox menu.xml file missing but I doubt that's related.
X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH i686
Current Operating System: Linux x_00294-ibc 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:33:50 CEST 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ec6a9a60-8d8c-4de0-960b-9e2a044d0ca5 ro quiet
Build Date: 05 October 2012 02:01:30PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 18:12:28 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Openbox-Message: Unable to find a valid menu file "/usr/share/lxde/openbox/menu.xml"
xinit: connection to X server lost
waiting for X server to shut down pcmanfm: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 2326 requests (2323 known processed) with 0 events remaining.
Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
.xinitrc for my user
exec ck-launch-session startlxde
Very wierd. -
Xorg-server 1.6 - black screen with mouse cursor
Hi
First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
I added a new test user to my system without compiz and get the same.
I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
I googled this problem and was searching similar things in this froum, but I wasn't able to find something
Here are some files
xorg.conf (i know there are some bullshit things in it, but it was workig )
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Eizo"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.8-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-75
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "GeForce4"
# Driver "nv"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "GeForce4"
Monitor "Eizo"
DefaultDepth 24
Option "AddARGBGLXVisuals" "true"
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Eizo"
(**) | |-->Device "GeForce4"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
(--) NVIDIA(0): EIZO L578 (DFP-0)
(--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
(**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
(**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
(II) saa7134 IR (LifeView FlyVIDEO30: Found keys
(II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
(II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by MueLLe (2009-04-15 21:35:42)I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?
-
Black Screen with mouse cursor
Hello
We are an enterprise organization with staffs logging in to their systems using domain username and password.
For some of our users having Windows 7 as OS, when they log in with their domain credentials a blank screen appears with movable mouse cursor, this screen does not go away until we disconnect them from LAN as well as wireless after which only the login
happens.
Kindly suggest how to resolve this issueHi,
Have you tried the suggestion Cyber_Defend_Team provided?
If the issue persists, start the computer in Safe mode to check the result:
If it doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes. If a recently installed program, device, or driver prevents Windows from running correctly, you can start your computer
in safe mode and then remove the program that's causing the problem.
If it still in the safe mode, we may need to repair the installation with the recovery media.
In addition, please logon the problematic computer with the domain user account which works fine in other computer to test to see if it's the user account issue.
Karen Hu
TechNet Community Support
Maybe you are looking for
-
Training and Event Managaement in ESS/MSS Portal for ERP2004 version
Hi SDNs, I am working for ESS/MSS for ERP2004 system to NW2004s system.Afer importing the business packages to portal, I got only the following roles for ESS and MSS. Employee Self-Service: Employee Search | Working Time | Benefits and Payment | Pers
-
Equivalents of SQL Server sysobjects and syscolumns
I'm developing some software that nees to work on both SQL Server and Oracle. Just starting on the Oracle version, and the first thing I nede to do is query system tables for the names of tables, columns, datatypes etc. Can anyone tell me what tables
-
PL/SQL query and V$SESSION.sql_address
I am running a procedure on an 11gR2 database through a PL/SQL script in Linux-side SQLPlus. The procedure does an insert, and then exits. For the first few minutes, a join between V$SQL_SESSION.sql_address and V$SQL_TEXT.address for that SID returns
-
Authorization Issues with ROles
Hi Experts, We have total Set of 50 reports and work books... We need to give around 20(reports and work books) to one user and 20 to another user and 10 to another user... One user should not see another's reports..What should we do now...How to con
-
Reg: Refreshing the Values saved in the View
Hi, I'm having a popup window, it is getting opened when i click on link. in the popup view i'm entering some values and saving it and closing the popup. the problem is when click the link and open the popup again, i'm having the saved values there,