[SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)
Radeon HD 7790 + Catalyst = Error: unable to open display (null)
Greetings,
I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint) worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
Versions:
Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
Catalyst: 14.4-10
Xorg: 1.14.5-11
Logs&Configs:
lsmod
fglrx 8672295 0
amd_iommu_v2 7174 1 fglrx
button 4765 1 fglrx
fglrxinfo
Error: unable to open display (null)
Xorg.0.conf
[ 2632.576]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2632.594] X Protocol Version 11, Revision 0
[ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
[ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
[ 2632.619] Build Date: 08 January 2014 01:35:51PM
[ 2632.629]
[ 2632.635] Current version of pixman: 0.32.4
[ 2632.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
[ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
[ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2632.690] (==) ServerLayout "aticonfig Layout"
[ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2632.690] (==) Automatically adding devices
[ 2632.690] (==) Automatically enabling devices
[ 2632.690] (==) Automatically adding GPU devices
[ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2632.690] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2632.690] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2632.690] (II) Loader magic: 0x7fac20
[ 2632.690] (II) Module ABI versions:
[ 2632.690] X.Org ANSI C Emulation: 0.4
[ 2632.690] X.Org Video Driver: 14.1
[ 2632.690] X.Org XInput driver : 19.1
[ 2632.691] X.Org Server Extension : 7.0
[ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 2632.698] Initializing built-in extension Generic Event Extension
[ 2632.704] Initializing built-in extension SHAPE
[ 2632.710] Initializing built-in extension MIT-SHM
[ 2632.717] Initializing built-in extension XInputExtension
[ 2632.723] Initializing built-in extension XTEST
[ 2632.728] Initializing built-in extension BIG-REQUESTS
[ 2632.734] Initializing built-in extension SYNC
[ 2632.740] Initializing built-in extension XKEYBOARD
[ 2632.745] Initializing built-in extension XC-MISC
[ 2632.751] Initializing built-in extension SECURITY
[ 2632.756] Initializing built-in extension XINERAMA
[ 2632.761] Initializing built-in extension XFIXES
[ 2632.767] Initializing built-in extension RENDER
[ 2632.772] Initializing built-in extension RANDR
[ 2632.777] Initializing built-in extension COMPOSITE
[ 2632.782] Initializing built-in extension DAMAGE
[ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 2632.792] Initializing built-in extension DOUBLE-BUFFER
[ 2632.797] Initializing built-in extension RECORD
[ 2632.802] Initializing built-in extension DPMS
[ 2632.806] Initializing built-in extension X-Resource
[ 2632.811] Initializing built-in extension XVideo
[ 2632.816] Initializing built-in extension XVideo-MotionCompensation
[ 2632.821] Initializing built-in extension XFree86-VidModeExtension
[ 2632.825] Initializing built-in extension XFree86-DGA
[ 2632.830] Initializing built-in extension XFree86-DRI
[ 2632.834] Initializing built-in extension DRI2
[ 2632.834] (II) "glx" will be loaded by default.
[ 2632.834] (II) LoadModule: "glx"
[ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2632.835] compiled for 6.9.0, module version = 1.0.0
[ 2632.839] Loading extension GLX
[ 2632.839] (II) LoadModule: "fglrx"
[ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] Module class: X.Org Video Driver
[ 2632.863] (II) Loading sub module "fglrxdrm"
[ 2632.863] (II) LoadModule: "fglrxdrm"
[ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
[ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
[ 2632.864] (--) using VT number 2
[ 2632.885] (WW) Falling back to old probe method for fglrx
[ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.901] ukiOpenDevice: open result is 11, (OK)
[ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
[ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
[ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 2632.905] (II) Loading sub module "vgahw"
[ 2632.905] (II) LoadModule: "vgahw"
[ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 2632.906] compiled for 1.14.5, module version = 0.1.0
[ 2632.906] ABI class: X.Org Video Driver, version 14.1
[ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2632.906] (==) fglrx(0): Default visual is TrueColor
[ 2632.906] (**) fglrx(0): Option "DPMS" "true"
[ 2632.906] (==) fglrx(0): RGB weight 888
[ 2632.906] (II) fglrx(0): Using 8 bits per RGB
[ 2632.906] (==) fglrx(0): Buffer Tiling is ON
[ 2632.906] (II) Loading sub module "fglrxdrm"
[ 2632.906] (II) LoadModule: "fglrxdrm"
[ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.908] ukiOpenDevice: open result is 13, (OK)
[ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.908] (**) fglrx(0): NoAccel = NO
[ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
[ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
[ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
[ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2632.909] (II) fglrx(0): AC Adapter is used
[ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2632.914] (II) Loading sub module "vbe"
[ 2632.914] (II) LoadModule: "vbe"
[ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
[ 2632.915] compiled for 1.14.5, module version = 1.1.0
[ 2632.915] ABI class: X.Org Video Driver, version 14.1
[ 2632.915] (II) fglrx(0): VESA BIOS detected
[ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
[ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
[ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2632.915] (II) fglrx(0): PCIE card detected
[ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2632.915] (II) Loading sub module "fb"
[ 2632.915] (II) LoadModule: "fb"
[ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2632.916] (II) Module fb: vendor="X.Org Foundation"
[ 2632.916] compiled for 1.14.5, module version = 1.0.0
[ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2632.916] (II) Loading sub module "ddc"
[ 2632.916] (II) LoadModule: "ddc"
[ 2632.916] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
[ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 2633.034] (II) Loading sub module "ddc"
[ 2633.034] (II) LoadModule: "ddc"
[ 2633.034] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Connected Display0: CRT1
[ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.034] (II) fglrx(0): EDID Version: 1.3
[ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.034] (II) fglrx(0): Gamma: 2.20
[ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.034] (II) fglrx(0): Supported established timings:
[ 2633.034] (II) fglrx(0): 720x400@70Hz
[ 2633.034] (II) fglrx(0): 640x480@60Hz
[ 2633.034] (II) fglrx(0): 640x480@67Hz
[ 2633.034] (II) fglrx(0): 640x480@72Hz
[ 2633.034] (II) fglrx(0): 640x480@75Hz
[ 2633.034] (II) fglrx(0): 800x600@56Hz
[ 2633.034] (II) fglrx(0): 800x600@60Hz
[ 2633.034] (II) fglrx(0): 800x600@72Hz
[ 2633.034] (II) fglrx(0): 800x600@75Hz
[ 2633.034] (II) fglrx(0): 832x624@75Hz
[ 2633.034] (II) fglrx(0): 1024x768@60Hz
[ 2633.034] (II) fglrx(0): 1024x768@70Hz
[ 2633.034] (II) fglrx(0): 1024x768@75Hz
[ 2633.035] (II) fglrx(0): 1280x1024@75Hz
[ 2633.035] (II) fglrx(0): 1152x864@75Hz
[ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.035] (II) fglrx(0): Supported standard timings:
[ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.035] (II) fglrx(0): Supported detailed timing:
[ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.035] (II) fglrx(0): Monitor name: L1918S
[ 2633.035] (II) fglrx(0): Monitor name:
[ 2633.035] (II) fglrx(0): EDID (in hex):
[ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2633.036] (II) fglrx(0): EDID for output DFP1
[ 2633.036] (II) fglrx(0): EDID for output DFP2
[ 2633.036] (II) fglrx(0): EDID for output DFP3
[ 2633.036] (II) fglrx(0): EDID for output DFP4
[ 2633.036] (II) fglrx(0): EDID for output DFP5
[ 2633.036] (II) fglrx(0): EDID for output DFP6
[ 2633.036] (II) fglrx(0): EDID for output DFP7
[ 2633.036] (II) fglrx(0): EDID for output CRT1
[ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.036] (II) fglrx(0): EDID Version: 1.3
[ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.036] (II) fglrx(0): Gamma: 2.20
[ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.036] (II) fglrx(0): Supported established timings:
[ 2633.036] (II) fglrx(0): 720x400@70Hz
[ 2633.036] (II) fglrx(0): 640x480@60Hz
[ 2633.036] (II) fglrx(0): 640x480@67Hz
[ 2633.036] (II) fglrx(0): 640x480@72Hz
[ 2633.036] (II) fglrx(0): 640x480@75Hz
[ 2633.036] (II) fglrx(0): 800x600@56Hz
[ 2633.036] (II) fglrx(0): 800x600@60Hz
[ 2633.036] (II) fglrx(0): 800x600@72Hz
[ 2633.036] (II) fglrx(0): 800x600@75Hz
[ 2633.036] (II) fglrx(0): 832x624@75Hz
[ 2633.037] (II) fglrx(0): 1024x768@60Hz
[ 2633.037] (II) fglrx(0): 1024x768@70Hz
[ 2633.037] (II) fglrx(0): 1024x768@75Hz
[ 2633.037] (II) fglrx(0): 1280x1024@75Hz
[ 2633.037] (II) fglrx(0): 1152x864@75Hz
[ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.037] (II) fglrx(0): Supported standard timings:
[ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.037] (II) fglrx(0): Supported detailed timing:
[ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.037] (II) fglrx(0): Monitor name: L1918S
[ 2633.037] (II) fglrx(0): Monitor name:
[ 2633.037] (II) fglrx(0): EDID (in hex):
[ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2633.037] (II) fglrx(0): Output DFP1 disconnected
[ 2633.037] (II) fglrx(0): Output DFP2 disconnected
[ 2633.037] (II) fglrx(0): Output DFP3 disconnected
[ 2633.037] (II) fglrx(0): Output DFP4 disconnected
[ 2633.037] (II) fglrx(0): Output DFP5 disconnected
[ 2633.038] (II) fglrx(0): Output DFP6 disconnected
[ 2633.038] (II) fglrx(0): Output DFP7 disconnected
[ 2633.038] (II) fglrx(0): Output CRT1 connected
[ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
[ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2633.038] (II) fglrx(0): DPI set to (96, 96)
[ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
[ 2633.038] (II) Loading sub module "ramdac"
[ 2633.038] (II) LoadModule: "ramdac"
[ 2633.038] (II) Module "ramdac" already built-in
[ 2633.038] (==) fglrx(0): NoDRI = NO
[ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
[ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2633.038] (==) fglrx(0): UseFastTLS=0
[ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2633.038] (--) Depth 24 pixmap format is 32 bpp
[ 2633.038] Loading extension ATIFGLRXDRI
[ 2633.038] (II) fglrx(0): doing swlDriScreenInit
[ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.039] ukiOpenDevice: open result is 14, (OK)
[ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
[ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
[ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
[ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2633.039] (II) fglrx(0): swlDriScreenInit done
[ 2633.039] (II) fglrx(0): Kernel Module Version Information:
[ 2633.039] (II) fglrx(0): Name: fglrx
[ 2633.039] (II) fglrx(0): Version: 14.10.2
[ 2633.039] (II) fglrx(0): Date: Apr 17 2014
[ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
[ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
[ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
[ 2633.040] (II) fglrx(0): DRI initialization successfull
[ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 2633.041] (==) fglrx(0): Backing store disabled
[ 2633.041] Loading extension FGLRXEXTENSION
[ 2633.041] (**) fglrx(0): DPMS enabled
[ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2633.041] (**) fglrx(0): Textured Video is enabled.
[ 2633.041] (II) LoadModule: "glesx"
[ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
[ 2633.043] Loading extension GLESX
[ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
[ 2633.043] (II) fglrx(0): GLESX is enabled
[ 2633.043] (II) LoadModule: "amdxmm"
[ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
[ 2633.055] Loading extension AMDXVOPL
[ 2633.055] Loading extension AMDXVBA
[ 2633.055] (II) fglrx(0): Enable composite support successfully
[ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
[ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
[ 2633.055] (II) fglrx(0): X context handle = 0x1
[ 2633.055] (II) fglrx(0): [DRI] installation complete
[ 2633.055] (==) fglrx(0): Silken mouse enabled
[ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2633.414] (--) RandR disabled
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.432] ukiOpenDevice: open result is 15, (OK)
[ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.443] ukiOpenDevice: open result is 16, (OK)
[ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiDynamicMajor: found major device number 250
[ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.446] ukiOpenDevice: open result is 16, (OK)
[ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
[ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.526] ukiOpenDevice: open result is 17, (OK)
[ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiDynamicMajor: found major device number 250
[ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.527] ukiOpenDevice: open result is 17, (OK)
[ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.546] (II) fglrx(0): OverDrive6 Detected!
[ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.594] (II) LoadModule: "evdev"
[ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
[ 2633.595] compiled for 1.14.3, module version = 2.8.2
[ 2633.595] Module class: X.Org XInput Driver
[ 2633.595] ABI class: X.Org XInput driver, version 19.1
[ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.595] (**) Power Button: always reports core events
[ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.595] (--) evdev: Power Button: Found keys
[ 2633.595] (II) evdev: Power Button: Configuring as keyboard
[ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2633.595] (**) Option "xkb_rules" "evdev"
[ 2633.595] (**) Option "xkb_model" "pc104"
[ 2633.595] (**) Option "xkb_layout" "us"
[ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.634] (**) Power Button: always reports core events
[ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.634] (--) evdev: Power Button: Found keys
[ 2633.634] (II) evdev: Power Button: Configuring as keyboard
[ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2633.634] (**) Option "xkb_rules" "evdev"
[ 2633.634] (**) Option "xkb_model" "pc104"
[ 2633.634] (**) Option "xkb_layout" "us"
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2633.635] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
[ 2633.639] (II) No input driver specified, ignoring this device.
[ 2633.639] (II) This device may have been added with another device file.
[ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
[ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2633.639] (**) Option "xkb_rules" "evdev"
[ 2633.639] (**) Option "xkb_model" "pc104"
[ 2633.639] (**) Option "xkb_layout" "us"
[ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2633.640] (II) No input driver specified, ignoring this device.
[ 2633.640] (II) This device may have been added with another device file.
[ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2639.300] (II) fglrx(0): Backup framebuffer data.
[ 2639.333] (II) fglrx(0): Backup complete.
[ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.732] (II) fglrx(0): Shutdown CMMQS
[ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
[ 2653.735] (EE)
[ 2653.740] (EE) Backtrace:
[ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
[ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
[ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
[ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
[ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
[ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
[ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
[ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
[ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
[ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
[ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
[ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
[ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
[ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
[ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
[ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
[ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
[ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
[ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
[ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
[ 2653.857] (EE)
[ 2653.861] (EE) Segmentation fault at address 0x0
[ 2653.866] (EE)
Fatal server error:
[ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2653.878] (EE)
[ 2653.883] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2653.904] (EE)
[ 2653.908] (EE) Server terminated with error (1). Closing log file.
xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
Thanks for your efforts.
Last edited by Mytrin (2014-05-25 19:09:02)
I've managed to solve this error:
(EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
Last edited by Mytrin (2014-05-25 19:06:09)
Similar Messages
-
Flex Compiler API Issue: Error: unable to open './flex-config.xml'
1) I make a java struts(or a servlet) to build swf file
dynamically when receiving the request from client. The struts
source code please see the attached code. deploy the structs to the
Tomcat
2) then copy the <Flex_SDK>/frameworks to the
<tomcat_home>/webapps/dozhang/WEB-INF
3) then copy the all the libraries under the
<Flex_SDK>/lib to the
<tomcat_home>/webapps/dozhang/WEB-INF/lib
4) Copy a test a.mxml to c:\
5) Start up Tomcat , access the structs, I will get the
Error: unable to open './flex-config.xml' in the tomcat log.
Can anyone tell me how to specify the location of the
flex-config.xml ?Ok, I solved it by myself
I need to add the following codes when calling the Compiler
API
Configuration conf = application.getDefaultConfiguration();
conf.setToken("flexlib", "path to the frameworks")
applicaiton.setConfiguration(conf);
Then it solved the problem -
ERROR: Unable to open TUXCONFIG file
Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PMHi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM -
ERROR: Unable to open structapps file!
Hello,
Having modified the structapps.fm in FM10, I am getting the following error within a dialog when attempting to use the same file in FM8:
ERROR: Unable to open structapps file! FA_errno -43
Is FM not backward compatible ? OR do I need to reread the file in FM8
ThanksThe file should be saved in the FM version that you're using it in. You can't use any newer FM version file in any older version of FM, e.g. FM8 can't open any FM10 files (except for the MIF formats).
-
Hi there,
As you see in the heading, I am getting the error "Unable to open file because it isn't a valid Keynote document". There has been a number of threads on this and there seems to be a usual work around that works in many cases, by changing the file extension to .zip and then looking for the index file and making some more extension changes...unfortunately, in my case (and it also happened to others), there is no index file, so the usually suggested solution doesn't work...Can someone please help? I am working on a tight deadline and would like to try and recover the file.
Thanks a lot in advance.
Best,
Just a regular apple user
PS: any other presentation opens fine in Keynote (09)Have you tried to create a new Keynote Presentation? Do you have another previously saved Keynote file you can try to open? These will make sure it is a problem with this specific presentation and not the whole program.
Try to delete the Keynote Preferences. They are located in the folder Macintosh HD>Users>your username>Library>Preferences and titled com.apple.iWork.Keynote.plist.
Your profile shows that you are still on Mc OS 10.6.6, is that true? You might try to update to 10.6.7 as I believe that there was a font issue fixed in this update (I don't know for sure since I am still on 10.5.8).
Try those and report back and we will see what we can come up with. -
Command line: Error: unable to open '/Applications/flex_sdk_4\frameworks\flex-config.xml'
Hi,
I am new to flex. I am trying to use the xmp sdk to create custom file info panels in photoshop.
I am going through the example show in the adobe documentation 'Building a panel with Flex SDK'
I got any running and I got all the files setup in the proper folders but I cannot for the life of me figure out why I keep getting this error.
Buildfile: /Volumes/three/2011/XMP/test project/build.xml
clean:
buildPanel:
[echo] --> Panel 'Test2'
[compc] Adobe Compc (Flex Component Compiler)
[compc] Version 4.5.1 build 21328
[compc] Copyright (c) 2004-2011 Adobe Systems, Inc. All rights reserved.
[compc] command line: Error: unable to open '/Applications/flex_sdk_4.5\frameworks\flex-config.xml'
[compc] Use 'compc -help' for information about using the command line.
BUILD FAILED
/Volumes/three/2011/XMP/test project/build.xml:20: compc task failed
Total time: 616 milliseconds
thanks,
digitalkylecan you tell us where your services-config.xml file is
located. can you make sure it is right under the "src" folder of
the Flex Builder project.
Hope this helps. -
E63 Adobe LE error 'unable to open file"
Hi!
I've bought an E63 six months ago and recently I've purchased a memory card.
After a few days I wasn't anymore able to open any pdf, either from the phone's memory, or the memory card.
I receive this error: "unable to open file!"
If I try to open the Adobe PDF executable file nothing happens.
Any suggestions?Hi,
Ensure that file name with same name and in same path should not be open while saving the data.
Award if it helps.
Jogdand M B -
Error can't open display while installation
Hi,
While installting oracle, i am unable to launch the oracle universal installer. I have already set the DISPLAY value to IPAddress.
I am installing it from ora<sid>, it asking about xlock. When i am running it from root, i am able to open up xclock. But i am unable to open up xclock from ora<sid>. It is giving error as error: can't open display.
Please suggest the solution.
Regards
KarunakarHello,
It already solved!
What I did was:
Open a new Term. session.
Under root user I ran
#xhost + *
(this enables the X window for all users)
Then I don´t needed to set the Display variable with the value user within that Term. session.
#echo $DISPLAY
#:0.0
... then I test xclock to validate the display functionality and then I start oracle wizard installation with command
#./RUNINSTALLER
The oracle installation finish without problems!
Best regards,
João Dimas - Portugal -
Error: Can't open display: localhost:0.0
Hi all,
Please help to solve the problem of x display, thanks a lot!
$DISPLAY=localhost:0.0; export DISPLAY
$xhost +sky
xhost: unable to open display "localhost:0.0"
$xclock
Error: Can't open display: localhost:0.0
Vivia/enreboot
or
using xmanager tool -
Unable to open display localhost:0.0 in VMware RedHat linux machine
I have been trying to Install Oracle 10g RAC in VMware linux virtual machine.
my virtual machines are running properly and I am able to use RSH & SSH.
when I run runInstaller it is not comming up due to DISPLAY environmental variable setup.
I have set the varable as follows
DISPLAY=localhost:0.0; export DISPLAY
then if i execute xhost + it gives the following error
"xhost: unable to open display localhost:0.0"
I have tried with ipaddress instead of localhost. Eventhen it is giving the same error
What is the problem? How I can solve the issue?i had the same issue. running the xhost + as root fixed the issue, but only after i switched to root using 'su -' instead of just 'su' (likely something in the profile scripts that get run when you use the '-' (dash) versus just using 'su'.
after running the xhost +, i was able to (as oracle) do:
export DISPLAY=:0.0
./runInstaller
And good to go. -
Xhost: unable to open display...
Greetings. I'm having install issues, and google is leading me to believe its due to the DISPLAY variable. The problem is all commands related to xhost, export DISPLAY, etc. all generate the error:
xhost: unable to open display "myIPAddress:0.0"
Any ideas?
Thanks in advance!!!
Edited by: ChrisRDBA on Oct 25, 2009 3:16 PMDISPLAY=:0
Way too easy. -
Unable to open file "NULL\.EXT" - default sizes assumed for initial extents
Dear Friends i am trying to install IDES 4.6C on Windows 2000 Advance server + MSSQL2000 this error i am facing during installation all of the installation files are on my D:\ drive following is the structure.
D:\DBExport\DB
D:\DBExport\Data
D:\DBExport\LABEL.ASC
and kernal also on D:\ drive.
this is the error number one which i got
Error: DBR3LOADEXEC_NT_MSS R3loadPrepare 2 722
Child exited with error: rc = 2
child_pid = 1
See logfile SAPAPPL2.log for further information
and here is the associated log file.
#START OF LOG: 20060123112519
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log
start of syntax check ###
end of syntax check ###
#START: 20060123112520
error message: No such file or directory
(GOS) WARNING: Unable to open file "NULL\.EXT" - default sizes assumed for initial extents
(OLD) ERROR: CREATE statement failed for object "D010L"
(CREATE TABLE "D010L" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010L.PROG'
exec sp_bindefault 'str_default','D010L.R3STATE'
exec sp_bindefault 'str_default','D010L.R3MODE'
exec sp_bindefault 'str_default','D010L.R3VERSION'
exec sp_bindefault 'num_default','D010L.MACH'
exec sp_bindefault 'num_default','D010L.BLOCKNR'
exec sp_bindefault 'num_default','D010L.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010L' in the database.
#STOP: 20060123112520
#START OF LOG: 20060123152536
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010L" dropped
restart finished ###
#START: 20060123152552
error message: No such file or directory
(GOS) WARNING: Unable to open file "NULL\.EXT" - default sizes assumed for initial extents
(IMP) TABLE: "D010L"
#Trying to create primary key "D010L~0"
(IMP) PRKEY: "D010L~0"
(OLD) ERROR: CREATE statement failed for object "D010LINF"
(CREATE TABLE "D010LINF" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"R3RELEASE" VARCHAR(4) NOT NULL , "R3MODIFY" INT NOT NULL ,
"UNAM" VARCHAR(12) NOT NULL , "UDAT" VARCHAR(8) NOT NULL ,
"UTIME" VARCHAR(6) NOT NULL , "L_DATALG" INT NOT NULL ,
"Q_DATALG" INT NOT NULL , "Y_DATALG" INT NOT NULL , "SDAT" VARCHAR(8) NOT NULL ,
"STIME" VARCHAR(6) NOT NULL )
exec sp_bindefault 'str_default','D010LINF.PROG'
exec sp_bindefault 'str_default','D010LINF.R3STATE'
exec sp_bindefault 'str_default','D010LINF.R3MODE'
exec sp_bindefault 'str_default','D010LINF.R3VERSION'
exec sp_bindefault 'num_default','D010LINF.MACH'
exec sp_bindefault 'str_default','D010LINF.R3RELEASE'
exec sp_bindefault 'num_default','D010LINF.R3MODIFY'
exec sp_bindefault 'str_default','D010LINF.UNAM'
exec sp_bindefault 'str_default','D010LINF.UDAT'
exec sp_bindefault 'str_default','D010LINF.UTIME'
exec sp_bindefault 'num_default','D010LINF.L_DATALG'
exec sp_bindefault 'num_default','D010LINF.Q_DATALG'
exec sp_bindefault 'num_default','D010LINF.Y_DATALG'
exec sp_bindefault 'str_default','D010LINF.SDAT'
exec sp_bindefault 'str_default','D010LINF.STIME'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010LINF' in the database.
#STOP: 20060123152556
#START OF LOG: 20060123154952
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010LINF" dropped
restart finished ###
#START: 20060123154955
(IMP) TABLE: "D010LINF"
#Trying to create primary key "D010LINF~0"
(IMP) PRKEY: "D010LINF~0"
(OLD) ERROR: CREATE statement failed for object "D010Q"
(CREATE TABLE "D010Q" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010Q.PROG'
exec sp_bindefault 'str_default','D010Q.R3STATE'
exec sp_bindefault 'str_default','D010Q.R3MODE'
exec sp_bindefault 'str_default','D010Q.R3VERSION'
exec sp_bindefault 'num_default','D010Q.MACH'
exec sp_bindefault 'num_default','D010Q.BLOCKNR'
exec sp_bindefault 'num_default','D010Q.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010Q' in the database.
#STOP: 20060123154956
#START OF LOG: 20060123162918
R3load version @(#) $Id: //bas/46D/src/ins/R3load/R3load.c#12 $ SAP
R3load -fast -i SAP0000.cmd -p SAP0000.log -r
start of syntax check ###
end of syntax check ###
trying to restart import ###
(RIM) INFO: table "D010Q" dropped
restart finished ###
#START: 20060123162920
(IMP) TABLE: "D010Q"
#Trying to create primary key "D010Q~0"
(IMP) PRKEY: "D010Q~0"
(IMP) ERROR: CREATE statement failed for object "D010Y"
(CREATE TABLE "D010Y" ( "PROG" VARCHAR(40) NOT NULL ,
"R3STATE" VARCHAR(1) NOT NULL , "R3MODE" VARCHAR(1) NOT NULL ,
"R3VERSION" VARCHAR(4) NOT NULL , "MACH" SMALLINT NOT NULL ,
"BLOCKNR" TINYINT NOT NULL , "BLOCKLG" DECIMAL(5,0) NOT NULL ,
"BLOCK" IMAGE NULL )
exec sp_bindefault 'str_default','D010Y.PROG'
exec sp_bindefault 'str_default','D010Y.R3STATE'
exec sp_bindefault 'str_default','D010Y.R3MODE'
exec sp_bindefault 'str_default','D010Y.R3VERSION'
exec sp_bindefault 'num_default','D010Y.MACH'
exec sp_bindefault 'num_default','D010Y.BLOCKNR'
exec sp_bindefault 'num_default','D010Y.BLOCKLG'
DbSlExecute: rc = 106
(SQL error 2714)
error message returned by DbSl:
There is already an object named 'D010Y' in the database.
#STOP: 20060123162921
I am really struck with the installation any help will be highly appreciated.
best regards,
ZeeshanHi:
It seemed to me that you put the wrong directory or drive when started the installation. It shows "error message: No such file or directory" when trying to locate the files.
You can try to verify your inputs during first phase of the installation.
Hope this helps!
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
http://www.gazum.com -
1356-200 xhost unable to open display
I am installing 10g oracle on aix using ssh secure sheell and got this error 1356-200 xhost unable to open display has any one has this issue before?
Cellineuser8422321 wrote:
I am installing 10g oracle on aix using ssh secure sheell and got this error 1356-200 xhost unable to open display has any one has this issue before?Make sure you are actually issuing xhost by the userid that 'owns' the display on which you want your images to appear.
It sounds like you are issuing the xhost on the remote computer (after ssh). (If so, why are you doing that?)
The sequence is:
- Log on to a computer that has an X11 screen that you want to use for display
- Open a terminal on this local screen ... do not su
- Issue xhost
- Note the 'DISPLAY' information
- ssh to the computer/user that has the software to be run
- issue 'export DISPLAY=' and add the hostname ':' and display info
- run the command -
Xclock Error: Can't open display: - after upgrading to openSSH 5.2p1
I have got two servers apssvrX and apssvrZ on OEL. Both were built by the same team using their standard build scripts.
Having received the servers I had installed Oracle (ODI) product on it successfully.
Then as a part of requirement and as per Oracle support's advise, I had upgraded the ssh version on apssvrX server from OpenSSH_4.3p2 To OpenSSH_5.2p1, so that, I can implement the chroot jailing.
As per Oracle advise, I had downloaded the 3 RPMs from "_http://layer1.rack911.com/openssh/rhel5/x86_64/" to run them on my first server i.e., apssvrX and then configured the sshd services following the below steps:
a) Modify /etc/ssh/sshd_config to comment the below line:
#Subsystem sftp /usr/libexec/openssh/sftp-server
b) Add below lines:
Subsystem sftp internal-sftp
Match Group sftponly
ChrootDirectory %h
X11Forwarding no
AllowTcpForwarding no
ForceCommand internal-sftp
Then lastly, Restart sshd services complete the configuration
# /etc/init.d/sshd restart
apssvrX server current details are as below:
apssvrX$ uname -a
Linux apssvrX 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrX$ ssh -V
OpenSSH_5.2p1, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
My problems started from this point onwards. I want to install another Oracle product using OUI, but when I try to execute xclock using the Exceed HummingBird tool on apssvrX server then it fails with the error - (xclock) Error: Can't open display:
I tried the DISPLAY variable setup as well but to no use.
Whereas I can successfully execute the xclock on apssvrZ and OUI as well. Its config details are as below:
apssvrZ$ uname -a
Linux apssvrZ 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
apssvrZ$ ssh -V
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
Please advise the way forward.Tried but still same error.
Affected servers's sshd_config is as below:
[root@apssvrX]# cat /etc/ssh/sshd_config
# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
Protocol 2
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin without-password
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
PasswordAuthentication yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM no
UsePAM yes
# Accept locale-related environment variables
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#ShowPatchLevel no
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/openssh/sftp-server
## Commented the sftp jailing configuration
##Subsystem sftp internal-sftp
##Match Group sftponly
## ChrootDirectory %h
## X11Forwarding no
## AllowTcpForwarding no
## ForceCommand internal-sftp -
X11 remote app and XQuartz and xterm Xt error: Can't open display: %s
Hi
I have Snow Leopard (10.8.4) and XQuartz on it I need to run X11 remote app on redhat.
On local host echo $DISPLAY shows /tmp/launch-d33HNb/org.macosforge.xquartz:0
When i do ssh -X (or -Y) [email protected] and try to run xterm i got:
xterm Xt error: Can't open display: %s
xterm: DISPLAY is not set
the sshd_config on remote host has
cat /etc/ssh/sshd_config | grep X11
#X11Forwarding no
X11Forwarding yes
X11DisplayOffset 10
#X11UseLocalhost yes
Question is do i need to set up DISPLAY variable on remote host?
If yes which display number do i choose?
if i do export DISPLAY=<my mac ip>:10.0 or export DISPLAY=<my mac ip>:0.0
i still have message xterm Xt error: Can't open display: %s
Maybe this will help also
ssh -v -v -Y [email protected]
OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 53: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 172.20.0.12 [172.20.0.12] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /var/root/.ssh/id_rsa type -1
debug1: identity file /var/root/.ssh/id_rsa-cert type -1
debug1: identity file /var/root/.ssh/id_dsa type -1
debug1: identity file /var/root/.ssh/id_dsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH_4*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie- hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blow fish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 110/256
debug2: bits set: 492/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 92:ac:c2:7b:1e:ba:6b:62:9b:32:3e:14:c6:87:a7:59
debug1: Host '172.20.0.12' is known and matches the RSA host key.
debug1: Found key in /var/root/.ssh/known_hosts:2
debug2: bits set: 524/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /var/root/.ssh/id_rsa (0x0)
debug2: key: /var/root/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: publickey
debug1: Trying private key: /var/root/.ssh/id_rsa
debug1: Trying private key: /var/root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
Authenticated to 172.20.0.12 ([172.20.0.12]:22).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: fd 3 setting TCP_NODELAY
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Thu Jun 6 09:12:43 2013 from 172.20.0.17
[root@npecdp01 ~]#Jeffrey Jones2 wrote:
I'm always looking for new tricks of the trade.
I remember now why I originally changed the ssh config file. Here is another trick: In a text editor, type
ssh://[email protected]
making the obvious substitutions. Select the line and drag it to the Desktop. It will create an inetloc file that, when double-clicked, opens a Terminal window and connects to the ssh session. I have several of these in my Dock.
That is a neat trick. However, with LaunchPad I'm not much of a Finder double-clicker anymore. What is interesting is that the OS knows how to handle the ssh protocol. You can also type "open ssh://[email protected]" for the same effect. That may not seem like much of a gain, but it reveals some interesting OS-level possibilities.
With an RSA key, I don't even need a password
You can use the newer DSA keys. There is another neat trick too. Pretty much every set of instructions I've seen online suggests using an empty private key password because running ssh-agent is such a hassle on Linux. It is built-in to OS X. So, on OS X, you can create more secure DSA private keys with pass phrases that are stored (and encrypted) in your keychain. You only have to supply the Then, even if someone gets your private keys, they get nothing.
Maybe you are looking for
-
Whenever I turn on or restart my MBP, a dialog box appears saying --> "/Library/StartupItems/if2k" has not been started because it does not have the proper security settings. How can I fix this? First, I searched online and found a site with a If2k
-
After adding the latest update to my 5c iphone, the screen was black, with the itune logo in the center, a white arrow below it point to the logo, and below that, what seemed to be a white lock, but it had a long white line reaching the bottom of the
-
Exploring the possibility of running a BW query through Web Dynpro
Hi, I would like to extract data from BW query and its output of should populate into the selection screen which is developed in Web Dynpro. Can anyone please help me out ..... Regards Padma N
-
Please help! I want my music back! I can't live without music!!
I just got a new PC and we downloaded iTunes as soon as we got it. My dads library was on there already so I decided to make my own. I synced my iPod and next thing you know all of my bought music is gone. How can I recover it? It was about 40 songs.
-
FixSqlRegistryKey has stopped working
I'm trying to install SQL Server 2014 Express under Windows 7 SP1 x64. I've previously had SQL Server Express (2012?) installed on this machine, but I've uninstalled it. I'm getting the crash FixSqlRegistryKey has stopped working during the check for