[solved] Radeon HD 3200 & AIGLX
Hey all, I just purchased an HP Pavilion dm3, which by the way was a hell of a deal: http://www.officemax.com/technology/com … rod2850237
The machine is very thin and light, and has been the most linux-compliant laptop I've played with.
At any rate, I've got arch up and running beautifully (after fixing HP's effed up partitioning *shakes fist*) Everything is working: Wireless, audio, webcam, suspend, hibernate, etc.
My last problem is that I'm only getting sudo GPU acceleration, and no AIGLX.
I'm running completely without an xorg.conf file (woohoo!) Here's what I'm seeing:
Xorg.0.log wrote:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux shane-arch 2.6.32-ARCH #1 SMP PREEMPT Mon Jan 25 20:06:48 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/0ec557fe-c784-4c83-b129-12b05cd9a4c1 ro 5 vga=0x369 edd=off resume=/dev/sda5
Build Date: 26 December 2009 11:37:45AM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 5 10:58:25 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:5:0) 1002:9612:103c:3656 ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0xe0000000/268435456, 0xf2200000/65536, 0xf2100000/1048576, I/O @ 0x00006000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000f2200000
(II) RADEON(0): MMIO registers at 0x00000000f2200000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x3656
IOBaseAddress: 0x6000
Filename: BR34990.bin
BIOS Bootup Message:
HP_Arwen RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x17ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x17ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 333000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=393216K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 333.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1366, YRes: 768, DotClock: 69300
HBlank: 96, HOverPlus: 32, HSyncWidth: 48
VBlank: 22, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Displayf
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1366x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (290, 170) mm
(**) RADEON(0): DPI set to (119, 204)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x18000000
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00801000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00805000
(II) RADEON(0): Will use 8196 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 8196 kb for back buffer at offset 0x00809000
(II) RADEON(0): Will use 8256 kb for depth buffer at offset 0x0100a000
(II) RADEON(0): Will use 117760 kb for textures at offset 0x0181a000
(II) RADEON(0): Will use 119640 kb for X Server offscreen at offset 0x08b1a000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf95fa000
(II) RADEON(0): [pci] ring handle = 0xf95fa000
(II) RADEON(0): [pci] Ring mapped at 0xa6ea3000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf96fb000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb76f3000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf96fc000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa6ca3000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf98fc000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa5023000
(II) RADEON(0): [drm] register handle = 0x2e440000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 18
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00d700c0 is: 0x00d700c0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 122511360 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1366x768 - 1462 790 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: file too short)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event12"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Generic Wheel Mouse: Found relative axes
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
(II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device hp webcam
(**) hp webcam: always reports core events
(**) hp webcam: Device: "/dev/input/event11"
(II) hp webcam: Found keys
(II) hp webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "hp webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've bolded the sections in question. Here's a little more info:
[shane@shane-arch ~]$ glxinfo | grep direct
direct rendering: Yes
[shane@shane-arch ~]$ lsmod | grep kms
drm_kms_helper 21971 1 radeon
drm 126588 4 radeon,ttm,drm_kms_helper
Any help would be appreciated I'd like to get compiz up and running.
-Shane
Last edited by krazyshane (2010-02-05 17:23:00)
You nailed it with the ati-dri package! Had a corrupt checksum! Forced a reinstall and now all good
Thanks for the quick reply!
-Shane
Similar Messages
-
Radeon HD 3200 and HDMI output [Solved]
Alright so I'm on an HP pavilion dv5 laptop with an integrated radeon hd 3200 and for some reason, I can't seem to output to my 32inch TV after a certain part of the boot process. It's strange though, because if I have my HDMI cable plugged in during boot, I can see the BIOS/GRUB boot menu and part of the daemons being loaded in the beginning, then it all goes blank on the TV. When the HDMI is plugged in, xrandr returns
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 60.0*+
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
HDMI-0 connected (normal left inverted right x axis y axis)
1280x720 60.0 +
1024x768 60.0
800x600 60.3
720x480 59.9
640x480 60.0
I've googled around and searched through the forums but haven't been able to figure this out. Oh and I'm using the open source ATI driver, not the catalyst one from the AUR. So I'm quite stumped and am getting tired of having to boot into windows to stream stuff so any and all help (as always) is greatly appreciated.
[Solved]
Last edited by saint_13 (2011-06-22 20:43:07)jlindgren wrote:Oddly enough, HDMI audio was *just* brought up on another thread. Take a look.
https://bbs.archlinux.org/viewtopic.php?id=119151
Alright I'll definitely be giving that a look over, however I'm still unable to output to my 32inch TV in my room. I mean it's definitely something with the TV, just no idea what. I've tried xrandr on the smallest resolution (like 640x400 or what have you) and still no go. My best guess is that it has something to do with the resolution, when the computer boots considering I can see my BIOS on my 32 inch but for the life of me I am just baffled. Anyways sorry for the late response, been busy with work and the like. So just to sum up so far; HDMI video out works on our 55 inch LCD @ any resolution but doesn't work on my little 32 inch. As always all help is greatly appreciated, especially you jlindgren for sticking around this long lol. -
Updating Radeon HD 3200 Graphics Driver - Help Required ASAP
Hi guys.
I have a question regarding updating the graphics drivers (Radeon HD 3200) on my Lenovo X100e ThinkPad. I cannot & it's doing my head IN!!! I'm stuck using the latest version Lenovo released on their website on 2nd July, 2010 (v8.663.2.1-091216a-093974C-Lenovo)!
I've had no problems compiling & installing the latest ATI/AMD drivers on my Linux (BackTrack v5) partition, so I do know a little about computers.
I've tried methods recommended here & by others shown on the following website:
http://glob.lokety.com/enable-hardware-acceleration-on-lenovo-x100e-for-better-video-playback/
Basically, no matter what version driver I try to update to I get the following error message (when attempting to manually update via Windows Device Manager):
“Windows encountered a problem installing the driver software for your device"
“Windows found driver software for your device but encountered an error while attempting to install it [ATI Radeon HD 3200 Graphics]”
“The driver selected for this device does not support this version of Windows...”
If anybody out there has a solution they can share I would be super appreciative; what little of my hair is left is in a most precarious situation...
Thank you all for your time. I hope you all had a very merry Christmas & wish you all a happy new year while I'm at it.
Simon (mezcal)
PS. sorry to cross-post on both the ThinkPads Support Community & the Lenovo Community forums – I'm just hoping someone out there has an answer for me – no doubt being so terribly simple & straightforward that I'll look like a noob S.
Solved!
Go to Solution.Dear The_Solutor,
Thank you kindly for your quick reply, & what's more:
IT WORKED!!!
My x64 bit version of Windows 7 (Pro) was starting to get a little bloated, etc. so, using Acronis True Image, I dropped a fresh & clean image of Win 7 SP1 & immediately updated the HD 3200 Graphics driver (after unpacking the installer you provided). This is certainly the best (computer related) event of my new year. THANK YOU.
I'm not sure if the problem was a result of my Windows installation becoming corrupted over time or (more likely) a result of incorrect driver usage.
Sometimes ATI's (AMD) driver selection method can be a little confusing (for notebooks like the X100e). Can you walk me through the choices you made to get to the correct download? For example, on their 'support - driver download' section of their website, what do you choose for the following 'drop-down' selection boxes:
1. Component Category
2. Product Line
3. Product Model
4. Operating System (obvious even to me!).
Thanks again mate. I really appreciate the time you took to solve my problem.
Happy New Year,
Simon (mezal) -
[SOLVED] Confused about Mobility Radeon HD 3200
I've always found hard to find good information about this card - some sources, even, contradict themselves. All what I know is that it is an integrated graphics card and that it features the RS780M chipset. These are some tips I've got from the system logs:
grep -i r600 /var/log/Xorg.0.log
[ 23.353] (II) RADEON(0): [DRI2] DRI driver: r600
[ 23.353] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 24.099] (II) AIGLX: Loaded and initialized r600
dmesg | grep -i radeon
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-hf root=UUID=ab92c2db-22b5-4fcb-a33f-2efe3f3f104c ro radeon.modeset=1 radeon.benchmark=0 radeon.tv=0 radeon.pm=0 init=/usr/lib/systemd/systemd quiet
[ 1.463857] [drm] radeon kernel modesetting enabled.
[ 1.464337] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 1.464340] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.464779] [drm] radeon: 256M of VRAM memory ready
[ 1.464781] [drm] radeon: 512M of GTT memory ready.
[ 1.472494] radeon 0000:01:05.0: WB enabled
[ 1.472499] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800374a5c00
[ 1.472502] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800374a5c0c
[ 1.472570] [drm] radeon: irq initialized.
[ 1.472672] radeon 0000:01:05.0: setting latency timer to 64
[ 1.504277] [drm] radeon atom DIG backlight initialized
[ 1.504279] [drm] Radeon Display Connectors
[ 1.504311] [drm] radeon: power management initialized
[ 2.344989] fbcon: radeondrmfb (fb0) is primary device
[ 2.441483] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 2.441486] radeon 0000:01:05.0: registered panic notifier
[ 2.441502] [drm] Initialized radeon 2.30.0 20080528 for 0000:01:05.0 on minor 0
I also found good (?) information, or at least a clearly-explained article, here. After reading it, UVD appears as the AMD's counterpart of NVIDIA's VDPAU for video acceleration.
What I'm not sure about, is:
- Does it support video acceleration? I'd like to offload video processing to the GPU, but am not sure if my card and the open-source drivers support it or not. Wikipedia's article about VDPAU states it comes from NVIDIA, but then it says it has an open-source implementation.
- What has gallium to do with it? What gallium drivers should I enable in mesa? And what about DRI drivers?
I configured mesa as follows:
./configure --prefix=/usr \
--sysconfdir=/etc \
--with-dri-driverdir=/usr/lib/xorg/modules/dri \
--with-gallium-drivers=r600 \
--with-dri-drivers=radeon \
--with-llvm-shared-libs \
--enable-gallium-llvm \
--enable-egl \
--enable-gallium-egl \
--with-egl-platforms=x11,drm \
--enable-shared-glapi \
--enable-gbm \
--enable-glx-tls \
--enable-dri \
--enable-glx \
--enable-osmesa \
--enable-texture-float \
--enable-xa \
--enable-vdpau
Not sure if I missed something, though.
I am very confused about how Linux manages graphics, and what all those layers are for. DRM, DRI, VDPAU, VA-API, gl, gl3, xv, xvmc... it's a mess!
Thanks in advance.
Last edited by Kalrish (2013-06-16 17:54:04)The feature matrix might help. The easy part to answer is that the 3D driver is split into two parts: DRM which is part of the kernel and DRI which is in userspace and comes from the mesa package.
Xv is an Xserver extension supported by pretty much all drivers. Found in the DDX (xf86-video-*), it uses features of the card to speed up the display of video (but not decoding). It can either do this by using the "video overlay" or creating a shader.
Now if you want to use Xv but also offload decoding to the card, you need a video acceleration API. The ones to choose from are XvMC, VA-API, VDAPU in increasing order of feature support. They were developed by Xorg, Intel, Nvidia respectively but anyone is free to implement them. I don't think it's correct to call UVD a counterpart of VDPAU. UVD is a bunch of registers on newer AMD cards. And if you sent bits to those registers in the right way, you can implement VDPAU.
The other way to implement VDPAU (say if the documentation for UVD registers was not released) is to use gallium. There is a gallium state tracker which can still do it at the expense of being slower. It is a hack whereby you convert video frames to polygon textures and make the OpenGL part of the card think that it's calculating part of a 3D scene when really it's decoding video. -
[SOLVED]Radeon R9 280x Glamor problems (video tearing, error messages)
When switching from Catalyst to xf86-video-ati, a few problems occurred.
I tried to enable EXA rendering by setting the option in my Xorg.conf, but I got the message that EXA isn't supported on my card and that Glamor will be used. I'm fine with using Glamor, but using it gives me some weird problems. For instance, when I play a video, the top 5% of the screen has horizontal tearing, as explained in this bug report: https://www.libreoffice.org/bugzilla/sh … i?id=78717
It seems unfortunately that there is no way to solve the video tearing problem with Glamor. I tried playing my videos with mpv and vlc and with different video output options (xv, gl-hq, gl, vdpau), but they all gave horizontal tearing in the top 5% of the screen.
When playing a video or running glxgears, I get the following error messages:
radeon: Failed to allocate a buffer:
radeon: size : 0 bytes
radeon: alignment : 4096 bytes
radeon: domains : 4
And this goes on and on when running the program.
There are also messages appearing in dmesg when those problems occur:
[ 1587.499789] [drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (0, 6, 4096, -22)
[ 1587.516597] [TTM] Illegal buffer object size
[ 1587.516606] [TTM] Illegal buffer object size
My full xorg.log:
http://pastebin.com/Jpi3wF7H
I understand that solving tearing is not a priority now with Glamor, but at least I want to get rid of the error messages. Any ideas?
lspci reports my card as:
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X]
The card that I use is this one http://www.sapphiretech.com/presentatio … 2022&lid=1 , the SAPPHIRE DUAL-X R9 280X 3GB GDDR5 OC
Last edited by robin007bond (2015-01-26 15:17:46)dpcismael wrote:
Sorry for the late reply, but I happen to have recently built a similar setup (Arch Linux + Radeon R9 280) and I'm also getting the "Failed to allocate a buffer" (of size 0) messages whenever I run something that seems to use the radeonsi driver (i.e. games, 3D, shaders...). However, I do not have the video tearing issue, and I don't get the messages when playing a video either (well, at least not with VLC, which is the only software I've tried for this). I can't really help you more with the video tearing issue, but I filed a specific bug report for the "Failed to allocate a buffer" messages here :
https://bugs.freedesktop.org/show_bug.cgi?id=82783
Thanks for reporting the bug! I hope that there'll be a solution for both of us.
Good to hear that you don't see tearing. It only happens on fast sequences.
An example:
https://www.youtube.com/watch?v=HU8CYlqoQJQ (in VLC) -
[solved] Radeon/Ati and Xorg 1.9
Hi,
since I've upgradede my ati driver (xf86-video-ati) and X to X 1.9 I cannot start my X session, because of the following issue:
Failed to map cursor buffer memory
Fatal server error:
failed to map pixmap -22
XIO fatal IO error 11 (Resource temporarily unavailable) on X server 0:0
In the very beginning after having upgraded, I obtained in addition the error of unknown synaptic devices (mouse and touchpad), but in one of the forum threads it was solved and thus I could fix it.(sry link is missing)
But the one error above is still unsolved, and hinders me starting X. Mr. Google couldn't help enymore.
Downgrading is not possible, because of the missing packages...
I hope one of you can help me get X on the screen.
best,
L-K
[EDIT]
I compiled from git and now xf86-video-ati-git works well. maybe the version in [extra] differs from that git-version in AUR.
Ty for reading.
Last edited by linux-ka (2010-10-26 18:07:35)The kind people from the IRC channel suggested I add this bit at the very end of the "/etc/X11/xorg.conf" file (instead of "/etc/X11/xorg.conf.d/10-evdev.conf" - tho it would've probably worked that way too):
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us, ro"
Option "XkbVariant" "std"
Option "XkbOptions" "grp:caps_toggle, grp_led:scroll"
EndSection
Apparently it works. I just have to hold AltGr and press s, q , a, i, t, etc to type ș â ă î ț etc. But how do I set it to ; { } ] ' ", etc, like the default behaviour in Windows... ? I would like them to correspond to this layout.
Because this is not the "standard" ("std") version...
I may have to edit the "/usr/share/X11/xkb/symbols/ro" file to map them.
Unless there's a better way ?
Last edited by DSpider (2010-12-11 13:19:16) -
[solved] [radeon] HDMI audio stopped working, video too fast
I'm using the `xf86-video-ati` driver, which worked fine up until when I upgraded Arch, after some weeks of not doing so. Now the HDMI audio is silent. Also, when I set the audio to output to HDMI in the GNOME sound menu, videos are playing faster. I tried setting the `radeon.audio=1` kernel commandline, but it didn't help or even change anything.
lspci wrote:01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV620 HDMI Audio [Radeon HD 3400 Series]
aplay -l wrote:**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: ALC1200 Digital [ALC1200 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
Any idea?
Last edited by Edward E. Edwardson (2013-10-17 05:59:54)See also this thread in the Newbie forums which might be related:
https://bbs.archlinux.org/viewtopic.php?id=171298
(As a suggestion: Maybe try the LTS kernel?)
Also:
https://bbs.archlinux.org/viewtopic.php?id=171244
Last edited by Andreaskem (2013-10-14 12:11:44) -
[SOLVED] Radeon HD 6310 on AMD E350 APU
I currently have a Raspberry PI running as a download/XBMC server with Arch Linux ARM connected to a TV through HDMI. This worked well so far, but I wanted to take some load off the RPi and bought an AMD E350 APU with an integrated Radeon HD 6310 GPU. Unfortunately, I'm not getting the video/audio out to work properly with Arch Linux x86_64.
Here is what I have done so far (reboots between appropriate steps):
Followed the Beginners' guide as for any other install.
Installed alsa-utils, mesa, mesa-demos, xorg-[server, server-utils, xinit], and created a user and added the user to the "audio,video" groups.
Installed the open source "xf86-video-ati" driver, added "radeon" to my MODULES array, found no other modesetting options, regenerated initramfs, and added a /etc/X11/xorg.conf.d/20-radeon.conf file for good measure. I also added "radeon.audio=1" to my kernel parameters and regenerated the GRUB config file.
With that setup, I tested the sound with the following:
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
# aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
# speaker-test -c 2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
where the aplay command didn't return an error, but also did not play any sound. Note that a test to the analogue sound did in fact work.
In addition to the sound not working, I wanted to test if the video will work with XBMC with
# glxinfo
Error: unable to open display
Thinking that maybe something went wrong, I reinstalled most of the above mentioned packages to no avail, and also checked that the "radeon" module was loaded, which it was. I then uninstalled the open source driver, removed "radeon" and "radeon.audio=1" from the appropriate files and regenerated GRUB and initramfs.
Next I decided to try the proprietary driver (reboots between appropriate steps):
Added the Vi0l0 [xorg114] and [catalyst] repositories
Installed xorg-related packes, catalyst-[hook, utils, libgl] and checked that "fglrx" was added and blacklisted "radeon".
Ran "aticonfig --initial" and checked the file.
Testing if the display works after verifying that the module loaded with lsmod:
# fglrxinfo
Error: unable to open display (null)
At this point I started to doubt the drivers working with the hardware, so I booted up with a live openSUSE 13.1 USB (kernel 3.11) with the "radeon.audio=1" option enabled. Testing the display here (cropped):
# glxinfo
name of display: :0
display: :0 screen: 0
direct rendering: Yes
seems to work fine, along with HDMI audio.
I have then clean installed Arch again, reinstalled mesa, xorg and xf86-video-ati and re-added all the parameters and such. Also tried some random things like adding "amd64_agp" to the modules, "radeon.pcie_gen2=0" to the kernel parameters in any attempt to get it to work, but nothing has yet.
At this point I'm stuck. Any help in getting this to work will be greatly appreciated.
Other useful info (cropped for relevance):
# cat /proc/asound/cards
0 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfeb44000 irq 42
1 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfeb40000 irq 16
# cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
# dmesg | grep radeon
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e847df24-9ec6-4d7a-8cb9-58c67334c6a5 rw quiet radeon.audio=1
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e847df24-9ec6-4d7a-8cb9-58c67334c6a5 rw quiet radeon.audio=1
[ 1.780114] [drm] radeon kernel modesetting enabled.
[ 1.780205] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 1.781733] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 1.781739] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 1.782586] [drm] radeon: 384M of VRAM memory ready
[ 1.782589] [drm] radeon: 1024M of GTT memory ready.
[ 1.807454] radeon 0000:00:01.0: WB enabled
[ 1.807463] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800b36bec00
[ 1.807468] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800b36bec0c
[ 1.808256] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010eb2118
[ 1.808306] radeon 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.808334] radeon 0000:00:01.0: radeon: using MSI.
[ 1.808379] [drm] radeon: irq initialized.
[ 1.946378] [drm] radeon: dpm initialized
[ 2.025643] fbcon: radeondrmfb (fb0) is primary device
[ 2.069485] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 2.069490] radeon 0000:00:01.0: registered panic notifier
[ 2.069526] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
Edit: Spelling and dmesg output.
Last edited by cornelus (2014-04-04 15:17:33)Hello andy123, thanks for the response.
As far as I know, I do not believe the /etc/X11/xorg.conf.d/20-radeon.conf file is necessary, but I tested the system with and without it. The current contents is just
Section "Device"
Identifier "Radeon"
Driver "radeon"
EndSection
As you mentioned, I would also prefer using the open source driver as I've often read and heard that it has better support than Catalyst.
Regarding the groups, I did in fact test the system with and without my user being in the video and audio groups. I do not start Xserver explicitly in a desktop environment, but rather just test for an available display via glxinfo. This test works well, as XBMC does the same check to see if OpenGL support is available, will not run if it is not available and prints the same error as glxinfo. No Xorg logs are available in /var/log/, maybe because it does not even begin to start due to lack of display.
The analogue channel is unmuted, and the default HDMI channel does not show a 'Master' or any other channel for that matter except S/PDIF. From a friend I've heard that this is correct, as the HDMI volume can not be set like this. The alsamixer UI is the same as on the openSUSE live disk, which worked fine.
I haven't installed XBMC on the new installation again, but will do so now and see if that forces X to write some logs. -
[solved] Samsung SCX-3200 prints garbage
Hi,
Some months ago I got a Samsung SCX-3200 mono multifunction printer. I installed samsung unified driver from AUR I think it was v3 and printer worked.
After the driver got updated to v4 I think my problems started. Sometimes when printing a document I only got pages with garbage characters in the first line on the whole page. Recently I am unable to print anything, always getting the same result, smileys, hearts etc on the first line. printing test page is the same.
I installed windows to another HDD in my desktop computer and no printing issue occurred. Also I installed samsung unified driver to another computer (running Arch), used the same USB cable, but garbage text was all I got.
Then I tried the official samsung package / installer and everything was the same.
Unfortunately there's no samsung unified driver 3 package in AUR anymore.
Please help me get my printer back.
Last edited by siriusb (2012-09-09 09:55:51)Hi,
test if the following PKGBUILD works for you. You need the files 99_smfpautoconf.rules and samsungUDC.desktop from the aur package samsung-unified-driver.
pkgname=samsung-unified-driver
pkgver=3.00.90
pkgrel=1
pkgdesc="Unified Linux Driver for Samsung printers and scanners."
arch=(i686 x86_64)
url="http://www.samsung.com"
license=('custom:samsung')
depends=('libstdc++5' 'libtiff' 'cups' 'ghostscript' 'sane')
conflicts=samsungmfp-configurator-qt4
options=(!strip)
source=("http://www.bchemnet.com/suldr/UnifiedLinuxDriver-${pkgver}.tar.gz"
'99_smfpautoconf.rules' 'samsungUDC.desktop')
sha1sums=('95de115a32399392cf3e50837c445f277cb3fdb6'
'29ee51d7bcb2541967f34c36c72ac62ecc621a1e'
'e2e337d2e22cab41071e5af585f04dcf9e779c7b')
if [ "$CARCH" = "x86_64" ]; then
CARCHCUSTOM="x86_64"
LIBDIRCUSTOM="lib64"
else
CARCHCUSTOM="i386"
LIBDIRCUSTOM="lib"
fi
build() {
# mpf
install -d "${pkgdir}/usr/lib"
install -d "${pkgdir}/usr/bin"
install -d "${pkgdir}/etc/udev/rules.d/"
install -m 755 "${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_root/usr/${LIBDIRCUSTOM}/libmfp.so.1.0.1" \
"${pkgdir}/usr/lib/libmfp.so.1.0.1"
install -m 755 "${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_root/opt/smfp-common/${LIBDIRCUSTOM}/libnetsnmp.so.10.0.2" \
"${pkgdir}/usr/lib/libnetsnmp.so.10.0.2"
install -m 644 "${srcdir}/99_smfpautoconf.rules" "${pkgdir}/etc/udev/rules.d/99_smfpautoconf.rules"
# cups
install -d "${pkgdir}/usr/lib/cups/filter"
install -d "${pkgdir}/usr/lib/cups/backend/"
install -d "${pkgdir}/etc/cups/"
install -d "${pkgdir}/usr/share/cups/model/samsung/cms"
install -m 444 -t "${pkgdir}/usr/share/cups/model/samsung/cms/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/ppd/cms/*
install -m 644 -t "${pkgdir}/usr/share/cups/model/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/ppd/*.ppd
install -m 755 "${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_root/usr/${LIBDIRCUSTOM}/cups/backend/mfp" \
"${pkgdir}/usr/lib/cups/backend/mfp"
install -m 755 -t "${pkgdir}/usr/lib/cups/filter/" ${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_root/usr/${LIBDIRCUSTOM}/cups/filter/*
install -m 755 "${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_root/usr/${LIBDIRCUSTOM}/cups/filter/smfpautoconf" \
"${pkgdir}/usr/lib/cups/filter/smfpautoconf"
install -m 644 -t "${pkgdir}/etc/cups/" ${srcdir}/cdroot/Linux/noarch/at_root/etc/cups/*
# sane
install -d "${pkgdir}/usr/lib/sane/"
install -d "${pkgdir}/etc/sane.d/dll.d"
install -m 644 "${srcdir}/cdroot/Linux/noarch/at_root/etc/sane.d/smfp.conf" "${pkgdir}/etc/sane.d/smfp.conf"
install -m 755 "${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_root/usr/${LIBDIRCUSTOM}/sane/libsane-smfp.so.1.0.1" \
"${pkgdir}/usr/lib/sane/libsane-smfp.so.1.0.1"
install -d "${pkgdir}/opt/Samsung/mfp/bin/"
install -m 755 "${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_opt/bin/netdiscovery" "${pkgdir}/opt/Samsung/mfp/bin/netdiscovery"
install -d "${pkgdir}/usr/sbin/"
install -m 755 "${srcdir}/cdroot/Linux/${CARCHCUSTOM}/at_root/usr/sbin/smfpd" "${pkgdir}/usr/sbin/smfpd"
install -d "${pkgdir}/opt/Samsung/mfp/share/"
install -m 644 "${srcdir}/cdroot/Linux/OEM.ini" "${pkgdir}/opt/Samsung/mfp/share/OEM.ini"
#create symbolic links
# mpf
cd "${pkgdir}/usr/lib"
ln -s ./libmfp.so.1.0.1 ./libmfp.so.1
ln -s ./libmfp.so.1.0.1 ./libmfp.so
cd "${pkgdir}/usr/lib/sane"
ln -s ./libsane-smfp.so.1.0.1 ./libsane-smfp.so.1
ln -s ./libsane-smfp.so.1 ./libsane-smfp.so
echo "smfp" >> "${pkgdir}/etc/sane.d/dll.d/smfp"
chmod 644 "${pkgdir}/etc/sane.d/dll.d/smfp"
# samsungmfp-configurator-qt4
install -d "${pkgdir}/opt/Samsung/mfp/bin/"
install -d "${pkgdir}/opt/Samsung/mfp/lib/"
install -d "${pkgdir}/opt/Samsung/mfp/share/"
install -d "${pkgdir}/opt/Samsung/mfp/share/help/"
install -d "${pkgdir}/opt/Samsung/mfp/share/images/"
install -d "${pkgdir}/opt/Samsung/mfp/share/tr/"
install -d "${pkgdir}/opt/Samsung/mfp/share/ui/"
install -d "${pkgdir}/opt/Samsung/mfp/share/utils/"
install -d "${pkgdir}/usr/share/applications/"
install -m 755 -t "${pkgdir}/opt/Samsung/mfp/bin/" ${srcdir}/cdroot/Linux/${CARCHCUSTOM}/qt4/at_opt/bin/*
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/lib/" ${srcdir}/cdroot/Linux/${CARCHCUSTOM}/qt4/at_opt/lib/*
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/eula.htm
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/VERSION-Common_LINUX
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/VERSION-Common_LINUX_Script
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/VERSION-Printer_LINUX
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/VERSION-Printer_LINUX-Script
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/VERSION-Scanner_LINUX
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/VERSION-Scanner_LINUX-Script
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/help/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/help/*
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/images/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/images/*
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/utils/" ${srcdir}/cdroot/Linux/noarch/at_opt/share/utils/*
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/tr/" ${srcdir}/cdroot/Linux/noarch/qt4/at_opt/share/tr/*
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/share/ui/" ${srcdir}/cdroot/Linux/noarch/qt4/at_opt/share/ui/*
install -m 644 "${startdir}/samsungUDC.desktop" "${pkgdir}/usr/share/applications/samsungUDC.desktop"
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/lib/" ${srcdir}/cdroot/Linux/${CARCHCUSTOM}/qt4/at_root/opt/smfp-common/${LIBDIRCUSTOM}/*
echo "LD_LIBRARY_PATH=/opt/Samsung/mfp/lib/:$LD_LIBRARY_PATH /opt/Samsung/mfp/bin/Configurator" >> "${pkgdir}/usr/bin/SamsungConfigurator"
chmod 555 "${pkgdir}/usr/bin/SamsungConfigurator"
echo "LD_LIBRARY_PATH=/opt/Samsung/mfp/lib/:$LD_LIBRARY_PATH /opt/Samsung/mfp/bin/ImageManager" >> "${pkgdir}/usr/bin/SamsungImageManager"
chmod 555 "${pkgdir}/usr/bin/SamsungImageManager"
echo "LD_LIBRARY_PATH=/opt/Samsung/mfp/lib/:$LD_LIBRARY_PATH /opt/Samsung/mfp/bin/smfpscan" >> "${pkgdir}/usr/bin/smfpscan"
chmod 555 "${pkgdir}/usr/bin/smfpscan"
mkdir -p "${srcdir}/libtiff/"
tar xzf "${srcdir}/cdroot/Linux/noarch/libtiff-3-${CARCHCUSTOM}.tar.gz" -C "${srcdir}/libtiff"
install -m 644 -t "${pkgdir}/opt/Samsung/mfp/lib/" ${srcdir}/libtiff/usr/${LIBDIRCUSTOM}/* -
[SOLVED] Radeon HD 3850 / Radeon open source driver
Hello,
My laptop broke and for some time now I am using my old desktop pc (2008), on which I have arch linux and manjaro, dual booted.
My problem is that if I want a long video (over 20 minutes my whole pc is becoming slow and the screen becomes sluggish, mouse too. At first I thought that the ram is not clearing but I 'sudo rm -rf /tmp/' and check htop and ram is not full. CPU is normal so I believe it has something to do with the graphics card.
Please help me track the source of the problem!
If you need any more info please let me know!
USING:
XFCE4
lspci:
nexus@nexus ~> sudo lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV670/680 HDMI Audio [Radeon HD 3690/3800 Series]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface (rev b2)
05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
dmesg | grep 'radeon'
nexus@nexus ~> dmesg | grep 'radeon'
[ 8.854595] [drm] radeon kernel modesetting enabled.
[ 8.854642] fb: switching to radeondrmfb from VESA VGA
[ 8.855089] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 8.855091] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 8.855149] [drm] radeon: 512M of VRAM memory ready
[ 8.855150] [drm] radeon: 512M of GTT memory ready.
[ 9.312998] [drm] radeon: power management initialized
[ 9.367406] radeon 0000:01:00.0: WB enabled
[ 9.367409] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800765bbc00
[ 9.378005] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xffffc900122921d0
[ 9.378010] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 9.378028] radeon 0000:01:00.0: irq 31 for MSI/MSI-X
[ 9.378038] radeon 0000:01:00.0: radeon: using MSI.
[ 9.378057] [drm] radeon: irq initialized.
[ 10.272486] fbcon: radeondrmfb (fb0) is primary device
[ 10.272506] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 10.272507] radeon 0000:01:00.0: registered panic notifier
[ 10.293348] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
cat /proc/meminfo
sudo cat /proc/meminfo
[sudo] password for nexus:
MemTotal: 2053268 kB
MemFree: 543480 kB
MemAvailable: 962164 kB
Buffers: 53308 kB
Cached: 520696 kB
SwapCached: 0 kB
Active: 904312 kB
Inactive: 372332 kB
Active(anon): 710112 kB
Inactive(anon): 50588 kB
Active(file): 194200 kB
Inactive(file): 321744 kB
Unevictable: 16544 kB
Mlocked: 16544 kB
SwapTotal: 3999992 kB
SwapFree: 3999992 kB
Dirty: 108 kB
Writeback: 0 kB
AnonPages: 719092 kB
Mapped: 321640 kB
Shmem: 51740 kB
Slab: 52188 kB
SReclaimable: 30728 kB
SUnreclaim: 21460 kB
KernelStack: 5136 kB
PageTables: 26016 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 5026624 kB
Committed_AS: 2944536 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 306608 kB
VmallocChunk: 34359425532 kB
HardwareCorrupted: 0 kB
AnonHugePages: 196608 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 165376 kB
DirectMap2M: 1931264 kB
lshsw
nexus@nexus ~> sudo lshw
nexus
description: Desktop Computer
product: P5K PRO (To Be Filled By O.E.M.)
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 vsyscall32
configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=40BB001E-8C00-0118-6394-001FC61593C0
*-core
description: Motherboard
product: P5K PRO
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev 1.xx
serial: MS1C81BY2A07369
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1303
date: 12/16/2008
size: 64KiB
capacity: 960KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: (To Be Filled By O.E.M.)
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
serial: To Be Filled By O.E.M.
slot: LGA775
size: 3819MHz
width: 64 bits
clock: 402MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dtherm
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 64KiB
capacity: 64KiB
capabilities: internal write-back data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 3MiB
capacity: 3MiB
capabilities: internal write-back instruction
*-memory
description: System Memory
physical id: 3b
slot: System board or motherboard
size: 2GiB
capacity: 2GiB
*-bank:0
description: DIMM [empty]
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
*-bank:1
description: DIMM [empty]
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
*-bank:2
description: DIMM [empty]
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
*-bank:3
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-pci
description: Host bridge
product: 82G33/G31/P35/P31 Express DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: 82G33/G31/P35/P31 Express PCI Express Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:b000(size=4096) memory:fe800000-fe8fffff ioport:d0000000(size=268435456)
*-display
description: VGA compatible controller
product: RV670 [Radeon HD 3690/3850]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:31 memory:d0000000-dfffffff memory:fe8e0000-fe8effff ioport:b000(size=256) memory:fe8c0000-fe8dffff
*-multimedia
description: Audio device
product: RV670/680 HDMI Audio [Radeon HD 3690/3800 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:29 memory:fe8fc000-fe8fffff
*-usb:0
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:a800(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:0
description: Mouse
product: USB Optical Mouse
vendor: Logitech
physical id: 1
bus info: usb@1:1
version: 54.00
capabilities: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=2Mbit/s
*-usb:1
description: Keyboard
product: ActiveJet K-2024 Multimedia Keyboard
vendor: Elan Microelectronics Corp.
physical id: 2
bus info: usb@1:2
version: 1.07
capabilities: usb-2.00
configuration: driver=usbhid maxpower=100mA speed=2Mbit/s
*-usb:1
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #5
vendor: Intel Corporation
physical id: 1a.1
bus info: pci@0000:00:1a.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:21 ioport:a880(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:2
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #6
vendor: Intel Corporation
physical id: 1a.2
bus info: pci@0000:00:1a.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:ac00(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb
description: Audio device
product: USB Sound Device
vendor: C-Media INC.
physical id: 2
bus info: usb@4:2
version: 0.10
capabilities: usb-1.10 audio-control
configuration: driver=snd-usb-audio maxpower=500mA speed=12Mbit/s
*-usb:3
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #2
vendor: Intel Corporation
physical id: 1a.7
bus info: pci@0000:00:1a.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:18 memory:fe7ffc00-fe7fffff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.18.13-1 ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 3.18
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-usb
description: Mass storage device
product: DataTraveler 111
vendor: Kingston
physical id: 5
bus info: usb@2:5
logical name: scsi6
version: 1.10
serial: 001CC0C61220BCB18323003A
capabilities: usb-2.10 scsi emulated scsi-host
configuration: driver=usb-storage maxpower=498mA speed=480Mbit/s
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@6:0.0.0
logical name: /dev/sdb
size: 14GiB (15GB)
capabilities: partitioned partitioned:dos
configuration: logicalsectorsize=512 sectorsize=512 signature=670821d0
*-volume
description: Windows FAT volume
vendor: mkfs.fat
physical id: 2
bus info: scsi@6:0.0.0,2
logical name: /dev/sdb2
version: FAT16
serial: b772-b198
size: 15EiB
capabilities: primary boot fat initialized
configuration: FATs=2 filesystem=fat label=MISO_EFI
*-multimedia
description: Audio device
product: 82801I (ICH9 Family) HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:28 memory:fe7f8000-fe7fbfff
*-pci:1
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:25 ioport:1000(size=4096) memory:80000000-803fffff ioport:fdf00000(size=1048576)
*-pci:2
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 5
vendor: Intel Corporation
physical id: 1c.4
bus info: pci@0000:00:1c.4
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:26 ioport:d000(size=4096) memory:fea00000-feafffff ioport:80400000(size=2097152)
*-ide
description: IDE interface
product: 88SE6101/6102 single-port PATA133 interface
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:03:00.0
version: b2
width: 32 bits
clock: 33MHz
capabilities: ide pm msi pciexpress bus_master cap_list
configuration: driver=pata_marvell latency=0
resources: irq:16 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:feaffc00-feaffdff
*-pci:3
description: PCI bridge
product: 82801I (ICH9 Family) PCI Express Port 6
vendor: Intel Corporation
physical id: 1c.5
bus info: pci@0000:00:1c.5
version: 02
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:27 ioport:c000(size=4096) memory:fe900000-fe9fffff ioport:80600000(size=2097152)
*-network
description: Ethernet interface
product: 88E8056 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 12
serial: 00:1f:c6:15:93:c0
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.4 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:30 memory:fe9fc000-fe9fffff ioport:c800(size=256) memory:fe9c0000-fe9dffff
*-usb:4
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:23 ioport:a080(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:a400(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:6
description: USB controller
product: 82801I (ICH9 Family) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@0000:00:1d.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci cap_list
configuration: driver=uhci_hcd latency=0
resources: irq:18 ioport:a480(size=32)
*-usbhost
product: UHCI Host Controller
vendor: Linux 3.18.13-1 uhci_hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 3.18
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:7
description: USB controller
product: 82801I (ICH9 Family) USB2 EHCI Controller #1
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci cap_list
configuration: driver=ehci-pci latency=0
resources: irq:23 memory:fe7ff800-fe7ffbff
*-usbhost
product: EHCI Host Controller
vendor: Linux 3.18.13-1 ehci_hcd
physical id: 1
bus info: usb@8
logical name: usb8
version: 3.18
capabilities: usb-2.00
configuration: driver=hub slots=6 speed=480Mbit/s
*-pci:4
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: 92
width: 32 bits
clock: 33MHz
capabilities: pci subtractive_decode bus_master cap_list
resources: ioport:e000(size=4096) memory:feb00000-febfffff
*-firewire
description: FireWire (IEEE 1394)
product: VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
vendor: VIA Technologies, Inc.
physical id: 3
bus info: pci@0000:05:03.0
version: c0
width: 32 bits
clock: 33MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=firewire_ohci latency=64 maxlatency=32
resources: irq:16 memory:febff800-febfffff ioport:ec00(size=128)
*-isa
description: ISA bridge
product: 82801IR (ICH9R) LPC Interface Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-ide:0
description: IDE interface
product: 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 02
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
resources: irq:22 ioport:9000(size=8) ioport:8c00(size=4) ioport:8880(size=8) ioport:8800(size=4) ioport:8480(size=16) ioport:8400(size=16)
*-serial UNCLAIMED
description: SMBus
product: 82801I (ICH9 Family) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 02
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:fe7ff400-fe7ff4ff ioport:400(size=32)
*-ide:1
description: IDE interface
product: 82801I (ICH9 Family) 2 port SATA Controller [IDE mode]
vendor: Intel Corporation
physical id: 1f.5
bus info: pci@0000:00:1f.5
version: 02
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=ata_piix latency=0
resources: irq:22 ioport:a000(size=8) ioport:9c00(size=4) ioport:9880(size=8) ioport:9800(size=4) ioport:9480(size=16) ioport:9400(size=16)
*-scsi:0
physical id: 1
logical name: scsi2
capabilities: emulated
*-disk
description: ATA Disk
product: ST3320613AS
vendor: Seagate
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: SD22
serial: 9SZ08X1B
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=000b2224
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
version: 3.1
serial: fe64-5abb
size: 348MiB
capacity: 350MiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2014-09-03 23:41:09 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true
*-volume:1
description: Windows NTFS volume
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
version: 3.1
serial: 525949d5-1b57-a842-b678-b84db82a9696
size: 148GiB
capacity: 148GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2014-09-03 23:57:20 filesystem=ntfs state=clean
*-volume:2
description: EXT4 volume
vendor: Linux
physical id: 3
bus info: scsi@2:0.0.0,3
logical name: /dev/sda3
version: 1.0
serial: df9ea610-2942-44f5-9d93-91fbff19cf63
size: 500MiB
capacity: 500MiB
capabilities: primary journaled extended_attributes huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2015-05-16 19:51:12 filesystem=ext4 lastmountpoint=/boot modified=2015-05-17 01:42:13 mounted=2015-05-17 00:31:11 state=clean
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@2:0.0.0,4
logical name: /dev/sda4
size: 148GiB
capacity: 148GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux filesystem partition
physical id: 5
logical name: /dev/sda5
capacity: 3906MiB
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sda6
logical name: /boot
capacity: 3906MiB
capabilities: bootable
configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
*-logicalvolume:2
description: Linux filesystem partition
physical id: 7
logical name: /dev/sda7
logical name: /
capacity: 141GiB
configuration: mount.fstype=ext4 mount.options=rw,relatime,data=ordered state=mounted
*-scsi:1
physical id: 2
logical name: scsi4
capabilities: emulated
*-cdrom
description: DVD-RAM writer
product: DRW-2014L1T
vendor: ASUS
physical id: 0.0.0
bus info: scsi@4:0.0.0
logical name: /dev/cdrom
logical name: /dev/sr0
version: 1.00
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
Last edited by nevinx (2015-05-22 19:35:33)Before you responded I already installed mesa-vdpau and no errors:
mplayer
libavformat version 56.25.101 (internal)
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
VIDEO: [H264] 720x406 0bpp 23.976 fps 622.6 kbps (76.0 kbyte/s)
Clip info:
major_brand: isom
minor_version: 1
compatible_brands: isom
creation_time: 2015-05-22 01:29:13
Load subtitles in ./
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 56.26.100 (internal)
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, floatle, 119.5 kbit/3.89% (ratio: 14939->384000)
Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
VO: [vdpau] 720x406 => 720x406 Planar YV12
A: 8.6 V: 8.6 A-V: 0.000 ct: 0.042 0/ 0 3% 1% 0.2% 0 0
vlc
cvlc something.mp4
VLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
[00000000017594b8] dummy interface: using the dummy interface module...
[00007f1fe90973d8] avcodec decoder: Using G3DVL VDPAU Driver Shared Library version 1.0 for hardware decoding.
I run a 2 hour video file with mplayer and my pc is fully working. Now I will try vlc, chrome and popcorn
Edit: Everything is working again. So the solution was to install vdpau. Thank you Lone_Wolf!
Last edited by nevinx (2015-05-22 19:35:03) -
[SOLVED] Radeon, black border (doesn't fill entire screen)
Updated yesterday. Now I have a black border of unused screen space along the edges of my monitor. It's an AMD system using the integrated card (785G (RS880, Radeon HD 4200)) and it's connected to a TV. I've tried DVI to HDMI as well as HDMI to HDMI, both with the same result. The KDE settings say that it's displaying 1920x1080@60Hz and so does the TV. I'm using the radeon driver as is, no xorg.conf or anything. I've tried searching but so far I've only found stuff related to overscan with the catalyst driver. I'm a bit of a n00b so please be patient if I ask stupid stuff
Does anyone have any ideas?
Last edited by SNix (2010-12-05 13:47:51)Hi,
got the same prob. I found this:
"It's the new "underscan" code added recently to deal with cases where an HDMI-attached TV has overscan set so users can't see the menus at boot. There's a RANDR mechanism to turn it off" -> http://www.phoronix.com/forums/showthread.php?t=25129
Try: xrandr --output HDMI-0 --set underscan off
(set Output to used one) -
[Solved] radeon module freezes system with dpm enabled
Hello,
I have been running my Radeon HD 5770 with xf86-video-ati (1:7.5.0-1) for quite some time now without any issues. Yesterday, I upgraded mesa and my system started to freeze with a black screen during boot. Blacklisting the radeon module allowed me to boot my system. Attempting to load radeon on a running system will also result in a black screen and a frozen machine. I was not able to recover any log output from the radeon module. Downgrading mesa did not resolve my problem.
Booting the kernel with radeon.dpm=0 seems to work. The fan noise is reduced by using dynpm for power_method. However, it would be nice to resolve this issue!
I'm running 3.18.6-1-ARCH. The mesa update:
[2015-02-07 11:52] [ALPM] transaction started
[2015-02-07 11:52] [ALPM] upgraded mesa (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded lib32-mesa (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded lib32-mesa-libgl (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded lib32-mesa-vdpau (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded mesa-libgl (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded mesa-vdpau (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded youtube-dl (2015.02.03-1 -> 2015.02.06-1)
[2015-02-07 11:52] [ALPM] transaction completed
Last edited by phaeilo (2015-02-09 19:26:44)I also experienced this problem when booting the Arch live cd. While the system was frozen, I moved my monitor's DVI connection to the other connector on my card. Suprisingly, the system became unfrozen and continued booting the live cd. Now the issue seems to be gone and I can boot from my harddisc with radeon.dpm enabled.
-
[SOLVED] Radeon HD 7690m support
I have an HP laptop with two GPU's, a radeon hd 6490m and a radeon hd 7690m. I have catalyst running fine with switchable graphics, the 6490m runs fine as expected but the 7690m shows up as 6000 series. I am aware that support for the 7000 series is not fully available and i was curious when i could expect support?
Last edited by BennyBolton (2012-08-03 12:54:55)ok so i ran some tests. I was really using glxgears to compare performance. I get about 850 FPS with the 7690m and 2500 FPS with the 6490m so i assumed the 7690m wasn't working properly and i had read that it had bad support on linux, but after reading your post i decided to run more tests. Darkplaces running quake gets 70 FPS on the 6490m but it gets 140 FPS on the 7690m. Also quake4 gets 30 FPS on the 6490m and 50 on the 7690m. Does anyone know why glxgears is getting bad scores?
-
[SOLVED] Radeon (Xorg) Resolution
I recently upgraded my monitor, from HD to UHD, and my graphics card so it was capable of powering the display. I tried to use the Catalyst driver but it crashes and so I've gone back to using the Radeon driver (I was using it with my previous graphics card and was content).
I followed the instructions, first for installing the Catalyst driver and then removing it, and getting the Radeon driver working with KMS. My machine boots, and I get Slim and and login to Xfce, but I am limited to 1024x768, which is a little far from the 3840x2160 I'm expecting.
My kernel prompt doesn't have any vga setting, I'm not (knowingly) blacklisting the Radeon driver, and I'm now not sure what else to try; I've seen a few posts in the forums which have given me some leads but so far nothing has worked. There were a few posts mentioning EDID settings/firmware but I'm not too sure what was meant, so I'm going to have a further look into that, but if anyone is able to shed some light I'd be grateful.
Thanks
(The Catalyst driver did, despite occasionally crashing, display at 3840x2160.)
Last edited by albinoloverats (2014-07-11 07:09:26)Here's the contents of dmes.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Fri Jun 14 08:12:55 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root ro cryptdevice=/dev/md2:root cryptkey=/dev/key:8192:2048 radeon.modeset=1 radeon.agpmode=8 radeon.audio=1 quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7d90000-0x00000000c7da7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7da8000-0x00000000c7dcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7dd0000-0x00000000c7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000437ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A87TD/USB3, BIOS 0801 05/04/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x438000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000438000000 aka 17280M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc7d90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x437e00000-0x437ffffff]
[ 0.000000] [mem 0x437e00000-0x437ffffff] page 2M
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x434000000-0x437dfffff]
[ 0.000000] [mem 0x434000000-0x437dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x433ffffff]
[ 0.000000] [mem 0x400000000-0x433ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7d8ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc7bfffff] page 2M
[ 0.000000] [mem 0xc7c00000-0xc7d8ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x378c2000-0x37c58fff]
[ 0.000000] ACPI: RSDP 00000000000fbae0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000c7d90100 0005C (v01 050410 XSDT1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7d90290 000F4 (v03 050410 FACP1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7d90450 0E9E0 (v01 A1629 A1629000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000c7da8000 00040
[ 0.000000] ACPI: APIC 00000000c7d90390 0007C (v01 050410 APIC1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7d90410 0003C (v01 050410 OEMMCFG 20100504 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7da8040 00072 (v01 050410 OEMB1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7d9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7d9f9b0 00038 (v01 050410 OEMHPET 20100504 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7d9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x437ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x437ffffff] -> [mem 0x00000000-0x437ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x437ffffff]
[ 0.000000] NODE_DATA [mem 0x437ff9000-0x437ffdfff]
[ 0.000000] [ffffea0000000000-ffffea0010dfffff] PMD -> [ffff880427600000-ffff8804375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x437ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0xc7d8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x437ffffff]
[ 0.000000] On node 0 totalpages: 4193578
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12727 pages used for memmap
[ 0.000000] DMA32 zone: 814480 pages, LIFO batch:31
[ 0.000000] Normal zone: 52736 pages used for memmap
[ 0.000000] Normal zone: 3375104 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7d90000 - 00000000c7da8000
[ 0.000000] PM: Registered nosave memory: 00000000c7da8000 - 00000000c7dd0000
[ 0.000000] PM: Registered nosave memory: 00000000c7dd0000 - 00000000c7e00000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc7e00000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880437c00000 s85824 r8192 d20672 u262144
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128030
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root ro cryptdevice=/dev/md2:root cryptkey=/dev/key:8192:2048 radeon.modeset=1 radeon.agpmode=8 radeon.audio=1 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ bc000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
[ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
[ 0.000000] Memory: 16364392k/17694720k available (4984k kernel code, 920408k absent, 409920k reserved, 3966k data, 1092k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:4352 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3210.418 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6423.37 BogoMIPS (lpj=10701393)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000034] AppArmor: AppArmor disabled by boot time parameter
[ 0.000714] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004513] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006247] Mount-cache hash table entries: 256
[ 0.006405] Initializing cgroup subsys cpuacct
[ 0.006407] Initializing cgroup subsys memory
[ 0.006416] Initializing cgroup subsys devices
[ 0.006417] Initializing cgroup subsys freezer
[ 0.006418] Initializing cgroup subsys net_cls
[ 0.006419] Initializing cgroup subsys blkio
[ 0.006439] tseg: 0000000000
[ 0.006445] CPU: Physical Processor ID: 0
[ 0.006446] CPU: Processor Core ID: 0
[ 0.006448] mce: CPU supports 6 MCE banks
[ 0.006452] LVT offset 0 assigned for vector 0xf9
[ 0.006456] process: using AMD E400 aware idle routine
[ 0.006458] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
[ 0.006525] Freeing SMP alternatives: 20k freed
[ 0.007058] ACPI: Core revision 20130117
[ 0.009901] ACPI: All ACPI Tables successfully acquired
[ 0.077509] ftrace: allocating 19546 entries in 77 pages
[ 0.083989] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.116998] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (fam: 10, model: 0a, stepping: 00)
[ 0.223505] Performance Events: AMD PMU driver.
[ 0.223508] ... version: 0
[ 0.223509] ... bit width: 48
[ 0.223510] ... generic registers: 4
[ 0.223510] ... value mask: 0000ffffffffffff
[ 0.223511] ... max period: 00007fffffffffff
[ 0.223512] ... fixed-purpose events: 0
[ 0.223512] ... event mask: 000000000000000f
[ 0.223540] process: System has AMD C1E enabled
[ 0.223546] process: Switch to broadcast mode on CPU0
[ 0.256986] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.276830] process: Switch to broadcast mode on CPU1
[ 0.293517] process: Switch to broadcast mode on CPU2
[ 0.310201] process: Switch to broadcast mode on CPU3
[ 0.323467] process: Switch to broadcast mode on CPU4
[ 0.263660] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK
[ 0.336798] Brought up 6 CPUs
[ 0.336802] smpboot: Total of 6 processors activated (38540.22 BogoMIPS)
[ 0.343396] process: Switch to broadcast mode on CPU5
[ 0.343666] devtmpfs: initialized
[ 0.345996] PM: Registering ACPI NVS region [mem 0xc7da8000-0xc7dcffff] (163840 bytes)
[ 0.346624] RTC time: 20:15:04, date: 06/17/13
[ 0.346660] NET: Registered protocol family 16
[ 0.346750] node 0 link 0: io port [1000, ffffff]
[ 0.346752] TOM: 00000000c8000000 aka 3200M
[ 0.346754] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.346756] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.346758] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.346759] node 0 link 0: mmio [a0000, bffff]
[ 0.346760] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.346761] TOM2: 0000000438000000 aka 17280M
[ 0.346763] bus: [bus 00-07] on node 0 link 0
[ 0.346764] bus: 00 [io 0x0000-0xffff]
[ 0.346765] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.346765] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.346766] bus: 00 [mem 0xc8000000-0xdfffffff]
[ 0.346767] bus: 00 [mem 0x438000000-0xfcffffffff]
[ 0.346845] ACPI: bus type PCI registered
[ 0.346895] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.346897] PCI: not using MMCONFIG
[ 0.346898] PCI: Using configuration type 1 for base access
[ 0.346898] PCI: Using configuration type 1 for extended access
[ 0.347187] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.347188] mtrr: probably your BIOS does not setup all CPUs.
[ 0.347189] mtrr: corrected configuration.
[ 0.347513] bio: create slab <bio-0> at 0
[ 0.347564] ACPI: Added _OSI(Module Device)
[ 0.347565] ACPI: Added _OSI(Processor Device)
[ 0.347566] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.347567] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.348295] ACPI: EC: Look up EC in DSDT
[ 0.349141] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.504019] ACPI: Interpreter enabled
[ 0.504029] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.504039] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.504040] ACPI: Using IOAPIC for interrupt routing
[ 0.504060] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.504680] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.511354] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.515054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.515211] PCI host bridge to bus 0000:00
[ 0.515214] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.515216] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.515217] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.515218] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.515219] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.515221] pci_bus 0000:00: root bus resource [mem 0xc7e00000-0xdfffffff]
[ 0.515222] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.515230] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.515240] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.515288] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.515315] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.515327] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.515358] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
[ 0.515383] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.515399] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.515420] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.515445] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.515460] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.515491] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.515506] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 0.515513] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 0.515519] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 0.515526] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 0.515532] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.515539] pci 0000:00:11.0: reg 24: [mem 0xfe5fe000-0xfe5fe3ff]
[ 0.515617] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.515627] pci 0000:00:12.0: reg 10: [mem 0xfe5f7000-0xfe5f7fff]
[ 0.515681] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.515706] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.515720] pci 0000:00:12.2: reg 10: [mem 0xfe5fe400-0xfe5fe4ff]
[ 0.515778] pci 0000:00:12.2: supports D1 D2
[ 0.515779] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.515801] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.515826] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.515835] pci 0000:00:13.0: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
[ 0.515892] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.515919] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.515933] pci 0000:00:13.2: reg 10: [mem 0xfe5fe800-0xfe5fe8ff]
[ 0.515991] pci 0000:00:13.2: supports D1 D2
[ 0.515992] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.516014] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.516039] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.516116] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.516131] pci 0000:00:14.2: reg 10: [mem 0xfe5f8000-0xfe5fbfff 64bit]
[ 0.516177] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.516195] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.516216] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.516302] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.516339] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.516360] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.516370] pci 0000:00:14.5: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
[ 0.516428] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.516455] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.516507] pci 0000:00:15.0: supports D1 D2
[ 0.516534] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.516561] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.516571] pci 0000:00:16.0: reg 10: [mem 0xfe5ff000-0xfe5fffff]
[ 0.516627] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.516654] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.516667] pci 0000:00:16.2: reg 10: [mem 0xfe5fec00-0xfe5fecff]
[ 0.516725] pci 0000:00:16.2: supports D1 D2
[ 0.516726] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.516751] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.516775] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.516820] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.516861] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.516902] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.516947] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.517046] pci 0000:05:00.0: [1002:68ba] type 00 class 0x030000
[ 0.517057] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.517066] pci 0000:05:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit]
[ 0.517072] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.517082] pci 0000:05:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.517107] pci 0000:05:00.0: supports D1 D2
[ 0.517138] pci 0000:05:00.1: [1002:aa58] type 00 class 0x040300
[ 0.517149] pci 0000:05:00.1: reg 10: [mem 0xfe9bc000-0xfe9bffff 64bit]
[ 0.517196] pci 0000:05:00.1: supports D1 D2
[ 0.523693] pci 0000:00:02.0: PCI bridge to [bus 05]
[ 0.523698] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.523701] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.523703] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.523754] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
[ 0.523777] pci 0000:04:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.523787] pci 0000:04:00.0: reg 14: [io 0xd880-0xd883]
[ 0.523797] pci 0000:04:00.0: reg 18: [io 0xd800-0xd807]
[ 0.523807] pci 0000:04:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.523817] pci 0000:04:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.523911] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.523917] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.523920] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.523960] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.523974] pci 0000:03:00.0: reg 10: [mem 0xfe8fa000-0xfe8fbfff 64bit]
[ 0.524040] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.530362] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.530367] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.530405] pci 0000:02:06.0: [14e4:4320] type 00 class 0x028000
[ 0.530419] pci 0000:02:06.0: reg 10: [mem 0xfe7fe000-0xfe7fffff]
[ 0.530508] pci 0000:02:07.0: [1102:0008] type 00 class 0x040100
[ 0.530524] pci 0000:02:07.0: reg 10: [io 0xcc00-0xcc3f]
[ 0.530599] pci 0000:02:07.0: supports D1 D2
[ 0.530648] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.530652] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.530655] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.530658] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.530659] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.530661] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.530662] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.530664] pci 0000:00:14.4: bridge window [mem 0xc7e00000-0xdfffffff] (subtractive decode)
[ 0.530665] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.530724] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.530739] pci 0000:01:00.0: reg 10: [io 0xb800-0xb8ff]
[ 0.530764] pci 0000:01:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
[ 0.530780] pci 0000:01:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
[ 0.530795] pci 0000:01:00.0: reg 30: [mem 0xfe6e0000-0xfe6fffff pref]
[ 0.530853] pci 0000:01:00.0: supports D1 D2
[ 0.530854] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.537032] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.537038] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.537041] pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.537045] pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.537121] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.537213] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
[ 0.537648] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
[ 0.537688] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 0.537729] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 0.537769] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
[ 0.537801] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.537826] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
[ 0.537851] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
[ 0.537876] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.537976] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.538001] Found 1 acpi root devices
[ 0.538022] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.538090] ACPI: No dock devices found.
[ 0.538163] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.538165] vgaarb: loaded
[ 0.538165] vgaarb: bridge control possible 0000:05:00.0
[ 0.538190] PCI: Using ACPI for IRQ routing
[ 0.544222] PCI: pci_cache_line_size set to 64 bytes
[ 0.544227] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.544273] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
[ 0.544274] e820: reserve RAM buffer [mem 0xc7d90000-0xc7ffffff]
[ 0.544335] NetLabel: Initializing
[ 0.544336] NetLabel: domain hash size = 128
[ 0.544336] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.544344] NetLabel: unlabeled traffic allowed by default
[ 0.544361] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.544363] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.546381] Switching to clocksource hpet
[ 0.549636] pnp: PnP ACPI init
[ 0.549645] ACPI: bus type PNP registered
[ 0.549695] pnp 00:00: [dma 4]
[ 0.549714] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.549739] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.549756] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.549790] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.550024] pnp 00:04: [dma 0 disabled]
[ 0.550073] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.550104] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.550175] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.550177] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.550179] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550328] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.550329] system 00:07: [io 0x040b] has been reserved
[ 0.550331] system 00:07: [io 0x04d6] has been reserved
[ 0.550332] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.550334] system 00:07: [io 0x0c14] has been reserved
[ 0.550335] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.550337] system 00:07: [io 0x0c52] has been reserved
[ 0.550338] system 00:07: [io 0x0c6c] has been reserved
[ 0.550339] system 00:07: [io 0x0c6f] has been reserved
[ 0.550341] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.550342] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.550343] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.550345] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.550346] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.550348] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.550349] system 00:07: [io 0x0b00-0x0b1f] has been reserved
[ 0.550351] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.550352] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.550354] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.550355] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.550357] system 00:07: [mem 0xc7e00000-0xc7efffff] has been reserved
[ 0.550359] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.550360] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.550362] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.550364] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550396] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.550436] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.550550] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.550551] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.550553] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 0.550554] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.550556] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550592] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.550594] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550651] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550653] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550655] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550657] pnp 00:0c: disabling [mem 0x00100000-0xc7dfffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550680] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.550682] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.550735] pnp: PnP ACPI: found 13 devices
[ 0.550736] ACPI: bus type PNP unregistered
[ 0.556964] pci 0000:00:02.0: PCI bridge to [bus 05]
[ 0.556967] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.556970] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.556972] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.556974] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.556976] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.556980] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.556982] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.556985] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.556987] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.556991] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.556997] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.556998] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.557001] pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.557004] pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.557178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.557180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.557181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.557182] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.557184] pci_bus 0000:00: resource 8 [mem 0xc7e00000-0xdfffffff]
[ 0.557185] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.557187] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.557188] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.557189] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.557191] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.557192] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.557194] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.557195] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.557196] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.557198] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.557199] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.557200] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.557202] pci_bus 0000:02: resource 8 [mem 0xc7e00000-0xdfffffff]
[ 0.557203] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.557204] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.557206] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.557207] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.557235] NET: Registered protocol family 2
[ 0.557438] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.557925] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.558146] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.558182] TCP: reno registered
[ 0.558195] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.558271] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.558384] NET: Registered protocol family 1
[ 0.863397] pci 0000:05:00.0: Boot video device
[ 0.863440] PCI: CLS 64 bytes, default 64
[ 0.863479] Unpacking initramfs...
[ 1.160180] Freeing initrd memory: 3676k freed
[ 1.161567] PCI-DMA: Disabling AGP.
[ 1.161669] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 1.161670] PCI-DMA: using GART IOMMU.
[ 1.161672] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.165829] LVT offset 1 assigned for vector 0x400
[ 1.165837] IBS: LVT offset 1 assigned
[ 1.165865] perf: AMD IBS detected (0x0000001f)
[ 1.165885] Scanning for low memory corruption every 60 seconds
[ 1.166044] audit: initializing netlink socket (disabled)
[ 1.166054] type=2000 audit(1371500104.929:1): initialized
[ 1.174485] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.176183] VFS: Disk quotas dquot_6.5.2
[ 1.176214] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.176380] msgmni has been set to 32097
[ 1.176700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.176734] io scheduler noop registered
[ 1.176735] io scheduler deadline registered
[ 1.176740] io scheduler cfq registered (default)
[ 1.176860] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.176946] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 1.177012] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.177095] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 1.177172] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.177174] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.177176] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
[ 1.177178] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.177186] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 1.177188] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.177189] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 1.177199] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.177200] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.177202] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.177213] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.177215] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.177217] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.177256] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.177257] vesafb: scrolling: redraw
[ 1.177258] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.177306] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 1216k, total 1216k
[ 1.180552] Console: switching to colour frame buffer device 80x30
[ 1.183672] fb0: VESA VGA frame buffer device
[ 1.183697] GHES: HEST is not enabled!
[ 1.183758] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.204272] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.204582] Linux agpgart interface v0.103
[ 1.204624] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.204987] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.205013] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.205163] mousedev: PS/2 mouse device common for all mice
[ 1.205202] rtc_cmos 00:01: RTC can wake from S4
[ 1.205317] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.205339] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.205347] cpuidle: using governor ladder
[ 1.205348] cpuidle: using governor menu
[ 1.205349] EFI Variables Facility v0.08 2004-May-17
[ 1.205397] drop_monitor: Initializing network drop monitor service
[ 1.205449] TCP: cubic registered
[ 1.205518] NET: Registered protocol family 10
[ 1.205632] NET: Registered protocol family 17
[ 1.205638] Key type dns_resolver registered
[ 1.205930] PM: Hibernation image not present or could not be loaded.
[ 1.205936] registered taskstats version 1
[ 1.206957] Magic number: 1:120:296
[ 1.206967] tty tty29: hash matches
[ 1.207045] rtc_cmos 00:01: setting system clock to 2013-06-17 20:15:05 UTC (1371500105)
[ 1.207837] Freeing unused kernel memory: 1092k freed
[ 1.208024] Write protecting the kernel read-only data: 8192k
[ 1.210116] Freeing unused kernel memory: 1148k freed
[ 1.211154] Freeing unused kernel memory: 420k freed
[ 1.216520] systemd-udevd[66]: starting version 204
[ 1.217728] device-mapper: uevent: version 1.0.3
[ 1.217810] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[ 1.218684] md: raid1 personality registered for level 1
[ 1.220485] [drm] Initialized drm 1.1.0 20060810
[ 1.223658] [drm] radeon kernel modesetting enabled.
[ 1.223728] checking generic (d0000000 130000) vs hw (d0000000 10000000)
[ 1.223731] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 1.223743] Console: switching to colour dummy device 80x25
[ 1.224011] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA 0x1043:0x03FE).
[ 1.224023] [drm] register mmio base: 0xFE9E0000
[ 1.224024] [drm] register mmio size: 131072
[ 1.224653] ATOM BIOS: 68BA.12.20.0.50.AS02.U128
[ 1.224689] radeon 0000:05:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 1.224691] radeon 0000:05:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 1.231083] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 1.231088] [drm] RAM width 128bits DDR
[ 1.231166] [TTM] Zone kernel: Available graphics memory: 8218350 kiB
[ 1.231167] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.231168] [TTM] Initializing pool allocator
[ 1.231172] [TTM] Initializing DMA pool allocator
[ 1.231196] [drm] radeon: 1024M of VRAM memory ready
[ 1.231197] [drm] radeon: 512M of GTT memory ready.
[ 1.231211] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.231779] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 1.231839] [drm] Loading JUNIPER Microcode
[ 1.238364] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.243582] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.243669] radeon 0000:05:00.0: WB enabled
[ 1.243671] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88042081bc00
[ 1.243673] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88042081bc0c
[ 1.243675] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.243676] [drm] Driver supports precise vblank timestamp query.
[ 1.243704] radeon 0000:05:00.0: irq 44 for MSI/MSI-X
[ 1.243711] radeon 0000:05:00.0: radeon: using MSI.
[ 1.243730] [drm] radeon: irq initialized.
[ 1.259929] [drm] ring test on 0 succeeded in 0 usecs
[ 1.259985] [drm] ring test on 3 succeeded in 1 usecs
[ 1.260036] [drm] Enabling audio support
[ 1.260055] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.260073] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.260465] [drm] Radeon Display Connectors
[ 1.260466] [drm] Connector 0:
[ 1.260467] [drm] HDMI-A-1
[ 1.260468] [drm] HPD4
[ 1.260470] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.260471] [drm] Encoders:
[ 1.260471] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.260472] [drm] Connector 1:
[ 1.260473] [drm] DVI-I-1
[ 1.260474] [drm] HPD1
[ 1.260475] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.260475] [drm] Encoders:
[ 1.260476] [drm] DFP2: INTERNAL_UNIPHY1
[ 1.260477] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.260478] [drm] Connector 2:
[ 1.260478] [drm] VGA-1
[ 1.260480] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.260481] [drm] Encoders:
[ 1.260482] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.260529] [drm] Internal thermal controller with fan control
[ 1.260586] [drm] radeon: power management initialized
[ 1.338618] [drm] fb mappable at 0xD0142000
[ 1.338620] [drm] vram apper at 0xD0000000
[ 1.338621] [drm] size 8294400
[ 1.338621] [drm] fb depth is 24
[ 1.338622] [drm] pitch is 7680
[ 1.338689] fbcon: radeondrmfb (fb0) is primary device
[ 1.543962] Console: switching to colour frame buffer device 240x67
[ 1.549072] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[ 1.549073] radeon 0000:05:00.0: registered panic notifier
[ 1.549077] [drm] Initialized radeon 2.30.0 20080528 for 0000:05:00.0 on minor 0
[ 1.550830] AVX instructions are not detected.
[ 1.551744] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.571433] SCSI subsystem initialized
[ 1.573198] ACPI: bus type ATA registered
[ 1.573287] libata version 3.00 loaded.
[ 1.574102] ACPI: bus type USB registered
[ 1.574225] usbcore: registered new interface driver usbfs
[ 1.574234] usbcore: registered new interface driver hub
[ 1.574352] usbcore: registered new device driver usb
[ 1.574980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.575108] scsi0 : pata_jmicron
[ 1.575462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.575566] ehci-pci: EHCI PCI platform driver
[ 1.575620] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.575629] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.575640] QUIRK: Enable AMD PLL fix
[ 1.575658] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5f7000
[ 1.575818] scsi1 : pata_jmicron
[ 1.576021] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.576026] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 1.576173] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 1.576178] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 1.576183] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 1.576188] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 1.576193] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 1.576198] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 1.576202] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 1.576338] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.576340] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.576459] xHCI xhci_add_endpoint called for root hub
[ 1.576461] xHCI xhci_check_bandwidth called for root hub
[ 1.576546] hub 2-0:1.0: USB hub found
[ 1.576553] hub 2-0:1.0: 2 ports detected
[ 1.576712] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.576715] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 1.579647] xHCI xhci_add_endpoint called for root hub
[ 1.579648] xHCI xhci_check_bandwidth called for root hub
[ 1.579683] hub 3-0:1.0: USB hub found
[ 1.579692] hub 3-0:1.0: 2 ports detected
[ 1.630858] hub 1-0:1.0: USB hub found
[ 1.630863] hub 1-0:1.0: 5 ports detected
[ 1.631075] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.631080] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.631094] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fc000
[ 1.687535] hub 4-0:1.0: USB hub found
[ 1.687540] hub 4-0:1.0: 5 ports detected
[ 1.687725] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.687730] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.687742] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5fd000
[ 1.740671] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55L, 1.03, max UDMA/66
[ 1.740677] ata1.01: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 1.744774] hub 5-0:1.0: USB hub found
[ 1.744779] hub 5-0:1.0: 2 ports detected
[ 1.744926] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.744931] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 1.744944] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5ff000
[ 1.753971] ata1.00: configured for UDMA/66
[ 1.767223] ata1.01: configured for UDMA/33
[ 1.771259] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55L 1.03 PQ: 0 ANSI: 5
[ 1.771985] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 1.775346] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.775348] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.775508] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.776395] sr1: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 1.776557] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.800881] hub 6-0:1.0: USB hub found
[ 1.800887] hub 6-0:1.0: 4 ports detected
[ 1.801082] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.801087] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
[ 1.801090] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.801102] ehci-pci 0000:00:12.2: debug port 1
[ 1.801127] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe5fe400
[ 1.810093] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.810200] hub 7-0:1.0: USB hub found
[ 1.810203] hub 7-0:1.0: 5 ports detected
[ 1.810397] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.810402] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 1.810404] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.810414] ehci-pci 0000:00:13.2: debug port 1
[ 1.810435] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe5fe800
[ 1.820100] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.820208] hub 8-0:1.0: USB hub found
[ 1.820211] hub 8-0:1.0: 5 ports detected
[ 1.820378] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.820383] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 9
[ 1.820385] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.820394] ehci-pci 0000:00:16.2: debug port 1
[ 1.820414] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe5fec00
[ 1.830126] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.830234] hub 9-0:1.0: USB hub found
[ 1.830236] hub 9-0:1.0: 4 ports detected
[ 1.830344] ahci 0000:00:11.0: version 3.0
[ 1.830463] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[ 1.830564] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.830567] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.831341] scsi2 : ahci
[ 1.831401] scsi3 : ahci
[ 1.831453] scsi4 : ahci
[ 1.831510] scsi5 : ahci
[ 1.831561] scsi6 : ahci
[ 1.831614] scsi7 : ahci
[ 1.831647] ata3: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe100 irq 52
[ 1.831650] ata4: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe180 irq 52
[ 1.831652] ata5: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe200 irq 52
[ 1.831653] ata6: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe280 irq 52
[ 1.831655] ata7: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe300 irq 52
[ 1.831658] ata8: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe380 irq 52
[ 2.150221] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.166824] tsc: Refined TSC clocksource calibration: 3210.668 MHz
[ 2.166833] Switching to clocksource tsc
[ 2.316872] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.316895] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.316918] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.316942] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.316965] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.318023] ata7.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[ 2.318026] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.318484] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 2.318486] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.319405] ata7.00: configured for UDMA/133
[ 2.319745] ata3.00: ATA-7: WDC WD1500AHFD-00RAR5, 21.07QR5, max UDMA/133
[ 2.319747] ata3.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.320091] ata4.00: ATA-8: WDC WD1500HLFS-01G6U4, 04.04V06, max UDMA/133
[ 2.320092] ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.320317] ata5.00: configured for UDMA/133
[ 2.322569] ata6.00: ATA-8: ST1000DM005 HD103SJ, 1AJ100E5, max UDMA/133
[ 2.322571] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.323221] ata3.00: configured for UDMA/133
[ 2.323342] scsi 2:0:0:0: Direct-Access ATA WDC WD1500AHFD-0 21.0 PQ: 0 ANSI: 5
[ 2.324026] sd 2:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB)
[ 2.324109] sd 2:0:0:0: [sda] Write Protect is off
[ 2.324112] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.324148] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.324465] ata4.00: configured for UDMA/133
[ 2.324568] scsi 3:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
[ 2.324709] sd 3:0:0:0: [sdb] 293046768 512-byte logical blocks: (150 GB/139 GiB)
[ 2.324775] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.324777] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.324812] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.324821] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 2.325264] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.325322] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.325325] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.325351] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.328013] sdc: sdc1
[ 2.328258] ata6.00: configured for UDMA/133
[ 2.328345] scsi 5:0:0:0: Direct-Access ATA ST1000DM005 HD10 1AJ1 PQ: 0 ANSI: 5
[ 2.328458] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.328547] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.328550] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.328567] scsi 6:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
[ 2.328579] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.328581] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.328979] sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.329043] sd 6:0:0:0: [sde] Write Protect is off
[ 2.329045] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.329069] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.333740] sdd: sdd1
[ 2.334008] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.338873] sde: sde1
[ 2.339153] sd 6:0:0:0: [sde] Attached SCSI disk
[ 2.352712] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 2.353194] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.363364] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > sdb4
[ 2.363842] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.484347] md: bind<sde1>
[ 2.492644] md: bind<sdd1>
[ 2.493906] md: bind<sdb4>
[ 2.495837] md: bind<sdb1>
[ 2.498041] md: bind<sdb2>
[ 2.500213] md: bind<sdb6>
[ 2.501310] md: bind<sdb5>
[ 2.502410] md: bind<sdb7>
[ 2.560860] md: bind<sda6>
[ 2.561903] md/raid1:md6: active with 2 out of 2 mirrors
[ 2.561917] md6: detected capacity change from 0 to 8588873728
[ 2.563625] md: bind<sdc1>
[ 2.593848] md6: unknown partition table
[ 2.620235] raid6: sse2x1 4601 MB/s
[ 2.673570] usb 8-1: new high-speed USB device number 2 using ehci-pci
[ 2.676870] raid6: sse2x2 7246 MB/s
[ 2.733545] raid6: sse2x4 8107 MB/s
[ 2.733546] raid6: using algorithm sse2x4 (8107 MB/s)
[ 2.733547] raid6: using intx1 recovery algorithm
[ 2.733694] async_tx: api initialized (async)
[ 2.733826] xor: measuring software checksum speed
[ 2.766907] prefetch64-sse: 14478.000 MB/sec
[ 2.800219] generic_sse: 13857.600 MB/sec
[ 2.800220] xor: using function: prefetch64-sse (14478.000 MB/sec)
[ 2.801069] md: raid6 personality registered for level 6
[ 2.801071] md: raid5 personality registered for level 5
[ 2.801072] md: raid4 personality registered for level 4
[ 2.801215] md/raid:md3: device sdc1 operational as raid disk 2
[ 2.801218] md/raid:md3: device sdd1 operational as raid disk 0
[ 2.801219] md/raid:md3: device sde1 operational as raid disk 1
[ 2.801432] md/raid:md3: allocated 3272kB
[ 2.801478] md/raid:md3: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 2.801479] RAID conf printout:
[ 2.801480] --- level:5 rd:3 wd:3
[ 2.801481] disk 0, o:1, dev:sdd1
[ 2.801482] disk 1, o:1, dev:sde1
[ 2.801483] disk 2, o:1, dev:sdc1
[ 2.801499] md3: detected capacity change from 0 to 2000138797056
[ 2.811326] md3: unknown partition table
[ 2.830352] md: bind<sda1>
[ 2.831401] md/raid1:md1: active with 2 out of 2 mirrors
[ 2.831429] md1: detected capacity change from 0 to 67043328
[ 2.837044] md1: unknown partition table
[ 2.843700] md: bind<sda7>
[ 2.844754] md/raid1:md7: active with 2 out of 2 mirrors
[ 2.844768] md7: detected capacity change from 0 to 4290760704
[ 2.845645] md: bind<sda2>
[ 2.846654] md/raid1:md2: active with 2 out of 2 mirrors
[ 2.846667] md2: detected capacity change from 0 to 2146422784
[ 2.862139] md7: unknown partition table
[ 2.872434] md: bind<sda4>
[ 2.873461] md/raid1:md4: active with 2 out of 2 mirrors
[ 2.873476] md4: detected capacity change from 0 to 122053378048
[ 2.874007] md2: unknown partition table
[ 2.889400] Initializing USB Mass Storage driver...
[ 2.889524] scsi8 : usb-storage 8-1:1.0
[ 2.889596] usbcore: registered new interface driver usb-storage
[ 2.889597] USB Mass Storage support registered.
[ 2.915578] md4: unknown partition table
[ 2.927038] md: bind<sda5>
[ 2.928198] md/raid1:md5: active with 2 out of 2 mirrors
[ 2.928212] md5: detected capacity change from 0 to 12883779584
[ 2.993651] usb 8-4: new high-speed USB device number 3 using ehci-pci
[ 3.002235] md5: unknown partition table
[ 3.119773] scsi9 : usb-storage 8-4:1.0
[ 3.623789] usb 4-5: new full-speed USB device number 2 using ohci_hcd
[ 3.892359] scsi 8:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
[ 3.893731] sd 8:0:0:0: [sdf] 65536000 512-byte logical blocks: (33.5 GB/31.2 GiB)
[ 3.894343] sd 8:0:0:0: [sdf] Write Protect is off
[ 3.894346] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00
[ 3.894990] sd 8:0:0:0: [sdf] No Caching mode page present
[ 3.895018] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.897857] sd 8:0:0:0: [sdf] No Caching mode page present
[ 3.897883] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.924732] sdf: sdf1
[ 3.928613] sd 8:0:0:0: [sdf] No Caching mode page present
[ 3.928639] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.928665] sd 8:0:0:0: [sdf] Attached SCSI removable disk
[ 4.121379] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 4.122747] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 4.124616] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 4.127113] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 4.135273] sd 9:0:0:0: [sdg] Attached SCSI removable disk
[ 4.137735] sd 9:0:0:1: [sdh] Attached SCSI removable disk
[ 4.139624] sd 9:0:0:2: [sdi] Attached SCSI removable disk
[ 4.140873] sd 9:0:0:3: [sdj] Attached SCSI removable disk
[ 4.243904] usb 1-5: new full-speed USB device number 2 using ohci_hcd
[ 6.259953] bio: create slab <bio-1> at 1
[ 6.437936] bio: create slab <bio-1> at 1
[ 6.524461] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
[ 6.524477] REISERFS (device dm-0): using ordered data mode
[ 6.524478] reiserfs: using flush barriers
[ 6.530254] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 6.530630] REISERFS (device dm-0): checking transaction log (dm-0)
[ 6.586126] REISERFS (device dm-0): Using r5 hash to sort names
[ 8.650945] systemd-udevd[320]: starting version 204
[ 8.892597] sdhci: Secure Digital Host Controller Interface driver
[ 8.892599] sdhci: Copyright(c) Pierre Ossman
[ 8.901571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.902459] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 8.915340] fuse init (API version 7.21)
[ 8.945154] loop: module loaded
[ 8.954456] ACPI: processor limited to max C-state 1
[ 8.972705] powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[ 9.093100] acpi-cpufreq: overriding BIOS provided _PSD data
[ 9.287999] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 9.288017] ACPI: Power Button [PWRB]
[ 9.288615] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.288633] ACPI: Power Button [PWRF]
[ 9.309972] wmi: Mapper loaded
[ 9.339825] ATK0110 ATK0110:00: EC enabled
[ 9.363123] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 9.364000] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 9.364280] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 9.365213] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[ 9.365261] snd_hda_intel 0000:05:00.1: irq 53 for MSI/MSI-X
[ 9.447348] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input6
[ 9.530152] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20130117/utaddress-251)
[ 9.530170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.582240] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
[ 9.582255] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 9.582265] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 9.582274] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 9.582283] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 9.582292] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 9.585795] ssb: Sonics Silicon Backplane found on PCI device 0000:02:06.0
[ 9.597991] MCE: In-kernel MCE decoding enabled.
[ 9.602641] EDAC MC: Ver: 3.0.0
[ 9.606098] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.606424] r8169 0000:01:00.0: irq 54 for MSI/MSI-X
[ 9.606790] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90013d46000, 48:5b:39:ca:b6:46, XID 0c100000 IRQ 54
[ 9.606797] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.610306] AMD64 EDAC driver v3.4.0
[ 9.610385] EDAC amd64: DRAM ECC disabled.
[ 9.610418] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 9.669939] vboxdrv: Found 6 processor cores.
[ 9.670195] vboxdrv: fAsync=0 offMin=0x8ef offMax=0x3fd9
[ 9.670262] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 9.670263] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 9.670899] microcode: CPU0: patch_level=0x010000bf
[ 9.682925] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 9.683031] sp5100_tco: PCI Revision ID: 0x41
[ 9.683089] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 9.683103] sp5100_tco: Last reboot was not triggered by watchdog.
[ 9.683212] sp5100_tco: initialized (0xffffc90014d96b00). heartbeat=60 sec (nowayout=0)
[ 9.733407] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 9.733703] microcode: CPU1: patch_level=0x010000bf
[ 9.733854] microcode: CPU2: patch_level=0x010000bf
[ 9.734119] microcode: CPU3: patch_level=0x010000bf
[ 9.734165] microcode: CPU4: patch_level=0x010000bf
[ 9.734186] microcode: CPU5: patch_level=0x010000bf
[ 9.734342] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.745360] kvm: Nested Virtualization enabled
[ 9.745364] kvm: Nested Paging enabled
[ 9.822608] systemd-udevd[447]: failed to execute '/usr/lib/udev/blkid' 'blkid ': No such file or directory
[ 9.837315] systemd-udevd[451]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdf': No such file or directory
[ 10.065623] media: Linux media interface: v0.10
[ 10.074496] Linux video capture interface: v2.00
[ 10.082272] gspca_main: v2.14.0 registered
[ 10.086077] gspca_main: STV06xx-2.14.0 probing 046d:08f0
[ 10.086084] gspca_stv06xx: st6422 sensor detected
[ 10.136408] systemd-udevd[508]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdi': No such file or directory
[ 10.182041] systemd-udevd[525]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdf1': No such file or directory
[ 10.216697] systemd-udevd[544]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdb7': No such file or directory
[ 10.241330] Bluetooth: Core ver 2.16
[ 10.241347] NET: Registered protocol family 31
[ 10.241348] Bluetooth: HCI device and connection manager initialized
[ 10.241357] Bluetooth: HCI socket layer initialized
[ 10.241359] Bluetooth: L2CAP socket layer initialized
[ 10.241363] Bluetooth: SCO socket layer initialized
[ 10.280260] usbcore: registered new interface driver btusb
[ 10.299795] systemd-udevd[600]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdd1': No such file or directory
[ 10.423003] input: STV06xx as /devices/pci0000:00/0000:00:12.0/usb1/1-5/input/input7
[ 10.423357] usbcore: registered new interface driver STV06xx
[ 10.535549] cfg80211: Calling CRDA to update world regulatory domain
[ 10.536658] systemd-sysctl[682]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 10.649374] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 10.668502] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
[ 10.688778] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 10.756972] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.797375] systemd-sysctl[709]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 10.878640] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input8
[ 16.369709] reiserfs: enabling write barrier flush mode
[ 16.695367] EXT4-fs (md1): mounting ext3 file system using the ext4 subsystem
[ 16.711651] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.721701] REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
[ 16.721742] REISERFS (device dm-2): using ordered data mode
[ 16.721746] reiserfs: using flush barriers
[ 16.727771] REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 16.728785] REISERFS (device dm-2): checking transaction log (dm-2)
[ 16.787812] REISERFS (device dm-2): Using r5 hash to sort names
[ 16.989853] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 17.012276] XFS (dm-4): Mounting Filesystem
[ 17.243475] XFS (dm-4): Starting recovery (logdev: internal)
[ 17.598719] XFS (dm-4): Ending recovery (logdev: internal)
[ 17.631060] XFS (dm-5): Mounting Filesystem
[ 17.978546] XFS (dm-5): Ending clean mount
And the -
[SOLVED] radeon/radeon dual GPU halp:)
Hey all, I just got a new laptop with radeon/radeon hybrid gpus and I'm a little lost as to how to go about setting anything up. The hybrid wiki only really mentions ati/intel, but I've got both my cards on the radeon driver.
I'm pretty sure arch has both cards going full tilt because the laptop is getting pretty hot and I can change the backlight in /sys/class/backlight/ for either video card and they both change the screen brightness.
I'm also not even sure which card is which;
# lspci |grep -i vga
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 9647
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Seymour [Radeon HD 6400M Series]
I though both cards are 6400m series, the dedicated is a 6470M and I thought I remembered seeing the integrated card as a 6400-series as well on windows when I first got it, but I'm no longer sure.
here they are in lshw
description: VGA compatible controller
product: Seymour [Radeon HD 6400M Series]
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 0
bus info: pci@0000:02:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:44 memory:b0000000-bfffffff memory:fea20000-fea3ffff ioport:e000(size=256) memory:fea00000-fea1ffff
description: VGA compatible controller
product: Advanced Micro Devices [AMD] nee ATI
vendor: Advanced Micro Devices [AMD] nee ATI
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:41 memory:a0000000-afffffff ioport:f000(size=256) memory:feb00000-feb3ffff
I was thinking of picking one of the cards and writing an xorg.conf to try and disable one and enable the other at x launch, but before I do that does anyone have any words of wisdom or anywhere I should look for guidance? Also is it strange that even with both video cards going on the opensource driver compositing is very slow?
EDIT: ok so I've fixed the compiz and I did try a xorg.conf that specifies one of the devices; this is over my head though. Is specifying the card in the xorg.conf enough to keep one of the cards idle?
EDIT2: nah both cards are still burning full tilt, lm-sensors has both going ~70-74 degrees like they're crunching my math homework
thanks all.
Last edited by htedrom (2012-05-27 05:09:17)Hey Pres, thanks for the reply
Yea nothing in the BIOS, and sorry specifying by BusId is what I meant by using xorg.conf, so I do have only one specified, though with both cards on the same driver I am unable to blacklist one of them.
I have looked a bit at the ati wiki for powersaving but it doesn't really seem to matter what I do to the cards in terms of power profile.. switching from profile to dynamic didn't seem to change much, nor did specifying a low power profile for one of them. I'm going to install an opengl game when I get home and see what I can see when switching between profiles, but so far in terms of temperature the power profiles didn't seem to have much effect.
Edit: is trying to put only one of the cards on the prop driver possible/a good idea? Could I then blacklist the open source driver for the dedicated card?
Last edited by htedrom (2012-05-08 19:25:09)
Maybe you are looking for
-
ISync WONT Sync with Nokia N95 please help!
HI can anyone help me please! I'm running OSX 10.4.10 on a Macbook pro. I have downloaded the N95 plug in. - and run it first. Paired the two (deleted previous pairing) Ran iSync (2.4(501.2))to add device which sees the N95 and reports that iSync can
-
I am having problems with the GR-Based Invoice Verification flag in the POs. Basically what I need is for the system to not allow me to post invoices over the good receipted quantity. I manage to get that control switching on the "GR-Based IV" flag i
-
Starting a remote login through ABAP
Hello! First of all, I am a beginner in ABAP :). Now the question - I have registered a remote R/3 system in SM59 and the remote login works. Is it now possible to start the remote login for that particular system through an ABAP program? If so how d
-
I've had my MacBook Pro for about 3 weeks, and today as i was using it on a 45% battery charge, my MBP completely shut down (it was not in sleep mode) and it would not turn on again for about 5 minutes. Has anyone experienced this?
-
How much is teacher/student version upgrade from LR4?
How much is teacher/student version upgrade from LR4?