[SOLVED] Radeon (Xorg) Resolution

Question

I recently upgraded my monitor, from HD to UHD, and my graphics card so it was capable of powering the display. I tried to use the Catalyst driver but it crashes and so I've gone back to using the Radeon driver (I was using it with my previous graphics card and was content).
I followed the instructions, first for installing the Catalyst driver and then removing it, and getting the Radeon driver working with KMS. My machine boots, and I get Slim and and login to Xfce, but I am limited to 1024x768, which is a little far from the 3840x2160 I'm expecting.
My kernel prompt doesn't have any vga setting, I'm not (knowingly) blacklisting the Radeon driver, and I'm now not sure what else to try; I've seen a few posts in the forums which have given me some leads but so far nothing has worked. There were a few posts mentioning EDID settings/firmware but I'm not too sure what was meant, so I'm going to have a further look into that, but if anyone is able to shed some light I'd be grateful.
Thanks
(The Catalyst driver did, despite occasionally crashing, display at 3840x2160.)
Last edited by albinoloverats (2014-07-11 07:09:26)

Answer 1

Here's the contents of dmes.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Fri Jun 14 08:12:55 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root ro cryptdevice=/dev/md2:root cryptkey=/dev/key:8192:2048 radeon.modeset=1 radeon.agpmode=8 radeon.audio=1 quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7d90000-0x00000000c7da7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7da8000-0x00000000c7dcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7dd0000-0x00000000c7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000437ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A87TD/USB3, BIOS 0801 05/04/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x438000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000438000000 aka 17280M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc8000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc7d90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x437e00000-0x437ffffff]
[ 0.000000] [mem 0x437e00000-0x437ffffff] page 2M
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x434000000-0x437dfffff]
[ 0.000000] [mem 0x434000000-0x437dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x433ffffff]
[ 0.000000] [mem 0x400000000-0x433ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7d8ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc7bfffff] page 2M
[ 0.000000] [mem 0xc7c00000-0xc7d8ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x378c2000-0x37c58fff]
[ 0.000000] ACPI: RSDP 00000000000fbae0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000c7d90100 0005C (v01 050410 XSDT1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7d90290 000F4 (v03 050410 FACP1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7d90450 0E9E0 (v01 A1629 A1629000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000c7da8000 00040
[ 0.000000] ACPI: APIC 00000000c7d90390 0007C (v01 050410 APIC1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7d90410 0003C (v01 050410 OEMMCFG 20100504 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7da8040 00072 (v01 050410 OEMB1313 20100504 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7d9f8a0 00108 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7d9f9b0 00038 (v01 050410 OEMHPET 20100504 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7d9f9f0 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xc7ffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x437ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xc7ffffff] -> [mem 0x00000000-0xc7ffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xc7ffffff] + [mem 0x100000000-0x437ffffff] -> [mem 0x00000000-0x437ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x437ffffff]
[ 0.000000] NODE_DATA [mem 0x437ff9000-0x437ffdfff]
[ 0.000000] [ffffea0000000000-ffffea0010dfffff] PMD -> [ffff880427600000-ffff8804375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x437ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0xc7d8ffff]
[ 0.000000] node 0: [mem 0x100000000-0x437ffffff]
[ 0.000000] On node 0 totalpages: 4193578
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12727 pages used for memmap
[ 0.000000] DMA32 zone: 814480 pages, LIFO batch:31
[ 0.000000] Normal zone: 52736 pages used for memmap
[ 0.000000] Normal zone: 3375104 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7d90000 - 00000000c7da8000
[ 0.000000] PM: Registered nosave memory: 00000000c7da8000 - 00000000c7dd0000
[ 0.000000] PM: Registered nosave memory: 00000000c7dd0000 - 00000000c7e00000
[ 0.000000] PM: Registered nosave memory: 00000000c7e00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc7e00000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880437c00000 s85824 r8192 d20672 u262144
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128030
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root ro cryptdevice=/dev/md2:root cryptkey=/dev/key:8192:2048 radeon.modeset=1 radeon.agpmode=8 radeon.audio=1 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ bc000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ bc000000
[ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000c0000000
[ 0.000000] Memory: 16364392k/17694720k available (4984k kernel code, 920408k absent, 409920k reserved, 3966k data, 1092k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:4352 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3210.418 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6423.37 BogoMIPS (lpj=10701393)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000034] AppArmor: AppArmor disabled by boot time parameter
[ 0.000714] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004513] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006247] Mount-cache hash table entries: 256
[ 0.006405] Initializing cgroup subsys cpuacct
[ 0.006407] Initializing cgroup subsys memory
[ 0.006416] Initializing cgroup subsys devices
[ 0.006417] Initializing cgroup subsys freezer
[ 0.006418] Initializing cgroup subsys net_cls
[ 0.006419] Initializing cgroup subsys blkio
[ 0.006439] tseg: 0000000000
[ 0.006445] CPU: Physical Processor ID: 0
[ 0.006446] CPU: Processor Core ID: 0
[ 0.006448] mce: CPU supports 6 MCE banks
[ 0.006452] LVT offset 0 assigned for vector 0xf9
[ 0.006456] process: using AMD E400 aware idle routine
[ 0.006458] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
[ 0.006525] Freeing SMP alternatives: 20k freed
[ 0.007058] ACPI: Core revision 20130117
[ 0.009901] ACPI: All ACPI Tables successfully acquired
[ 0.077509] ftrace: allocating 19546 entries in 77 pages
[ 0.083989] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.116998] smpboot: CPU0: AMD Phenom(tm) II X6 1090T Processor (fam: 10, model: 0a, stepping: 00)
[ 0.223505] Performance Events: AMD PMU driver.
[ 0.223508] ... version: 0
[ 0.223509] ... bit width: 48
[ 0.223510] ... generic registers: 4
[ 0.223510] ... value mask: 0000ffffffffffff
[ 0.223511] ... max period: 00007fffffffffff
[ 0.223512] ... fixed-purpose events: 0
[ 0.223512] ... event mask: 000000000000000f
[ 0.223540] process: System has AMD C1E enabled
[ 0.223546] process: Switch to broadcast mode on CPU0
[ 0.256986] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.276830] process: Switch to broadcast mode on CPU1
[ 0.293517] process: Switch to broadcast mode on CPU2
[ 0.310201] process: Switch to broadcast mode on CPU3
[ 0.323467] process: Switch to broadcast mode on CPU4
[ 0.263660] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK
[ 0.336798] Brought up 6 CPUs
[ 0.336802] smpboot: Total of 6 processors activated (38540.22 BogoMIPS)
[ 0.343396] process: Switch to broadcast mode on CPU5
[ 0.343666] devtmpfs: initialized
[ 0.345996] PM: Registering ACPI NVS region [mem 0xc7da8000-0xc7dcffff] (163840 bytes)
[ 0.346624] RTC time: 20:15:04, date: 06/17/13
[ 0.346660] NET: Registered protocol family 16
[ 0.346750] node 0 link 0: io port [1000, ffffff]
[ 0.346752] TOM: 00000000c8000000 aka 3200M
[ 0.346754] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.346756] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.346758] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.346759] node 0 link 0: mmio [a0000, bffff]
[ 0.346760] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.346761] TOM2: 0000000438000000 aka 17280M
[ 0.346763] bus: [bus 00-07] on node 0 link 0
[ 0.346764] bus: 00 [io 0x0000-0xffff]
[ 0.346765] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.346765] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.346766] bus: 00 [mem 0xc8000000-0xdfffffff]
[ 0.346767] bus: 00 [mem 0x438000000-0xfcffffffff]
[ 0.346845] ACPI: bus type PCI registered
[ 0.346895] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.346897] PCI: not using MMCONFIG
[ 0.346898] PCI: Using configuration type 1 for base access
[ 0.346898] PCI: Using configuration type 1 for extended access
[ 0.347187] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.347188] mtrr: probably your BIOS does not setup all CPUs.
[ 0.347189] mtrr: corrected configuration.
[ 0.347513] bio: create slab <bio-0> at 0
[ 0.347564] ACPI: Added _OSI(Module Device)
[ 0.347565] ACPI: Added _OSI(Processor Device)
[ 0.347566] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.347567] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.348295] ACPI: EC: Look up EC in DSDT
[ 0.349141] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.504019] ACPI: Interpreter enabled
[ 0.504029] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.504039] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.504040] ACPI: Using IOAPIC for interrupt routing
[ 0.504060] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.504680] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.511354] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.515054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.515211] PCI host bridge to bus 0000:00
[ 0.515214] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.515216] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.515217] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.515218] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.515219] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.515221] pci_bus 0000:00: root bus resource [mem 0xc7e00000-0xdfffffff]
[ 0.515222] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.515230] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.515240] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.515288] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.515315] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.515327] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.515358] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
[ 0.515383] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.515399] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.515420] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[ 0.515445] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.515460] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.515491] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.515506] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 0.515513] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 0.515519] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 0.515526] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 0.515532] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.515539] pci 0000:00:11.0: reg 24: [mem 0xfe5fe000-0xfe5fe3ff]
[ 0.515617] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.515627] pci 0000:00:12.0: reg 10: [mem 0xfe5f7000-0xfe5f7fff]
[ 0.515681] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.515706] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.515720] pci 0000:00:12.2: reg 10: [mem 0xfe5fe400-0xfe5fe4ff]
[ 0.515778] pci 0000:00:12.2: supports D1 D2
[ 0.515779] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.515801] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.515826] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.515835] pci 0000:00:13.0: reg 10: [mem 0xfe5fc000-0xfe5fcfff]
[ 0.515892] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.515919] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.515933] pci 0000:00:13.2: reg 10: [mem 0xfe5fe800-0xfe5fe8ff]
[ 0.515991] pci 0000:00:13.2: supports D1 D2
[ 0.515992] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.516014] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.516039] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.516116] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.516131] pci 0000:00:14.2: reg 10: [mem 0xfe5f8000-0xfe5fbfff 64bit]
[ 0.516177] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.516195] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.516216] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.516302] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.516339] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.516360] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.516370] pci 0000:00:14.5: reg 10: [mem 0xfe5fd000-0xfe5fdfff]
[ 0.516428] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.516455] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.516507] pci 0000:00:15.0: supports D1 D2
[ 0.516534] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.516561] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.516571] pci 0000:00:16.0: reg 10: [mem 0xfe5ff000-0xfe5fffff]
[ 0.516627] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.516654] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.516667] pci 0000:00:16.2: reg 10: [mem 0xfe5fec00-0xfe5fecff]
[ 0.516725] pci 0000:00:16.2: supports D1 D2
[ 0.516726] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.516751] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.516775] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.516820] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.516861] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.516902] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.516947] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.517046] pci 0000:05:00.0: [1002:68ba] type 00 class 0x030000
[ 0.517057] pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.517066] pci 0000:05:00.0: reg 18: [mem 0xfe9e0000-0xfe9fffff 64bit]
[ 0.517072] pci 0000:05:00.0: reg 20: [io 0xe000-0xe0ff]
[ 0.517082] pci 0000:05:00.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[ 0.517107] pci 0000:05:00.0: supports D1 D2
[ 0.517138] pci 0000:05:00.1: [1002:aa58] type 00 class 0x040300
[ 0.517149] pci 0000:05:00.1: reg 10: [mem 0xfe9bc000-0xfe9bffff 64bit]
[ 0.517196] pci 0000:05:00.1: supports D1 D2
[ 0.523693] pci 0000:00:02.0: PCI bridge to [bus 05]
[ 0.523698] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.523701] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.523703] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.523754] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
[ 0.523777] pci 0000:04:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.523787] pci 0000:04:00.0: reg 14: [io 0xd880-0xd883]
[ 0.523797] pci 0000:04:00.0: reg 18: [io 0xd800-0xd807]
[ 0.523807] pci 0000:04:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.523817] pci 0000:04:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.523911] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.523917] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.523920] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.523960] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.523974] pci 0000:03:00.0: reg 10: [mem 0xfe8fa000-0xfe8fbfff 64bit]
[ 0.524040] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.530362] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.530367] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.530405] pci 0000:02:06.0: [14e4:4320] type 00 class 0x028000
[ 0.530419] pci 0000:02:06.0: reg 10: [mem 0xfe7fe000-0xfe7fffff]
[ 0.530508] pci 0000:02:07.0: [1102:0008] type 00 class 0x040100
[ 0.530524] pci 0000:02:07.0: reg 10: [io 0xcc00-0xcc3f]
[ 0.530599] pci 0000:02:07.0: supports D1 D2
[ 0.530648] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.530652] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.530655] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.530658] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.530659] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.530661] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.530662] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.530664] pci 0000:00:14.4: bridge window [mem 0xc7e00000-0xdfffffff] (subtractive decode)
[ 0.530665] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.530724] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.530739] pci 0000:01:00.0: reg 10: [io 0xb800-0xb8ff]
[ 0.530764] pci 0000:01:00.0: reg 18: [mem 0xcffff000-0xcfffffff 64bit pref]
[ 0.530780] pci 0000:01:00.0: reg 20: [mem 0xcfff8000-0xcfffbfff 64bit pref]
[ 0.530795] pci 0000:01:00.0: reg 30: [mem 0xfe6e0000-0xfe6fffff pref]
[ 0.530853] pci 0000:01:00.0: supports D1 D2
[ 0.530854] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.537032] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.537038] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.537041] pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.537045] pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.537121] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.537213] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
[ 0.537648] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
[ 0.537688] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 0.537729] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 0.537769] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
[ 0.537801] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.537826] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
[ 0.537851] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
[ 0.537876] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.537976] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.538001] Found 1 acpi root devices
[ 0.538022] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.538090] ACPI: No dock devices found.
[ 0.538163] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.538165] vgaarb: loaded
[ 0.538165] vgaarb: bridge control possible 0000:05:00.0
[ 0.538190] PCI: Using ACPI for IRQ routing
[ 0.544222] PCI: pci_cache_line_size set to 64 bytes
[ 0.544227] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.544273] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
[ 0.544274] e820: reserve RAM buffer [mem 0xc7d90000-0xc7ffffff]
[ 0.544335] NetLabel: Initializing
[ 0.544336] NetLabel: domain hash size = 128
[ 0.544336] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.544344] NetLabel: unlabeled traffic allowed by default
[ 0.544361] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.544363] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.546381] Switching to clocksource hpet
[ 0.549636] pnp: PnP ACPI init
[ 0.549645] ACPI: bus type PNP registered
[ 0.549695] pnp 00:00: [dma 4]
[ 0.549714] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.549739] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.549756] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.549790] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.550024] pnp 00:04: [dma 0 disabled]
[ 0.550073] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.550104] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.550175] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.550177] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.550179] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550328] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.550329] system 00:07: [io 0x040b] has been reserved
[ 0.550331] system 00:07: [io 0x04d6] has been reserved
[ 0.550332] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.550334] system 00:07: [io 0x0c14] has been reserved
[ 0.550335] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.550337] system 00:07: [io 0x0c52] has been reserved
[ 0.550338] system 00:07: [io 0x0c6c] has been reserved
[ 0.550339] system 00:07: [io 0x0c6f] has been reserved
[ 0.550341] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.550342] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.550343] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.550345] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.550346] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.550348] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.550349] system 00:07: [io 0x0b00-0x0b1f] has been reserved
[ 0.550351] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.550352] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.550354] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.550355] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.550357] system 00:07: [mem 0xc7e00000-0xc7efffff] has been reserved
[ 0.550359] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.550360] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.550362] system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.550364] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550396] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.550436] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.550550] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.550551] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.550553] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 0.550554] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.550556] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550592] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.550594] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.550651] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550653] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550655] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550657] pnp 00:0c: disabling [mem 0x00100000-0xc7dfffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.550680] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.550682] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.550735] pnp: PnP ACPI: found 13 devices
[ 0.550736] ACPI: bus type PNP unregistered
[ 0.556964] pci 0000:00:02.0: PCI bridge to [bus 05]
[ 0.556967] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.556970] pci 0000:00:02.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.556972] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.556974] pci 0000:00:09.0: PCI bridge to [bus 04]
[ 0.556976] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.556980] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.556982] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.556985] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.556987] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.556991] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.556997] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.556998] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.557001] pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.557004] pci 0000:00:15.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.557178] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.557180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.557181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.557182] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.557184] pci_bus 0000:00: resource 8 [mem 0xc7e00000-0xdfffffff]
[ 0.557185] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.557187] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.557188] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.557189] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.557191] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.557192] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.557194] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.557195] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.557196] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.557198] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.557199] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.557200] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.557202] pci_bus 0000:02: resource 8 [mem 0xc7e00000-0xdfffffff]
[ 0.557203] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.557204] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.557206] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.557207] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref]
[ 0.557235] NET: Registered protocol family 2
[ 0.557438] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.557925] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.558146] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.558182] TCP: reno registered
[ 0.558195] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.558271] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.558384] NET: Registered protocol family 1
[ 0.863397] pci 0000:05:00.0: Boot video device
[ 0.863440] PCI: CLS 64 bytes, default 64
[ 0.863479] Unpacking initramfs...
[ 1.160180] Freeing initrd memory: 3676k freed
[ 1.161567] PCI-DMA: Disabling AGP.
[ 1.161669] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 1.161670] PCI-DMA: using GART IOMMU.
[ 1.161672] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.165829] LVT offset 1 assigned for vector 0x400
[ 1.165837] IBS: LVT offset 1 assigned
[ 1.165865] perf: AMD IBS detected (0x0000001f)
[ 1.165885] Scanning for low memory corruption every 60 seconds
[ 1.166044] audit: initializing netlink socket (disabled)
[ 1.166054] type=2000 audit(1371500104.929:1): initialized
[ 1.174485] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.176183] VFS: Disk quotas dquot_6.5.2
[ 1.176214] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.176380] msgmni has been set to 32097
[ 1.176700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.176734] io scheduler noop registered
[ 1.176735] io scheduler deadline registered
[ 1.176740] io scheduler cfq registered (default)
[ 1.176860] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.176946] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 1.177012] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.177095] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 1.177172] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 1.177174] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.177176] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
[ 1.177178] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 1.177186] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 1.177188] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.177189] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 1.177199] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.177200] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.177202] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.177213] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.177215] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.177217] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.177256] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.177257] vesafb: scrolling: redraw
[ 1.177258] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.177306] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011c00000, using 1216k, total 1216k
[ 1.180552] Console: switching to colour frame buffer device 80x30
[ 1.183672] fb0: VESA VGA frame buffer device
[ 1.183697] GHES: HEST is not enabled!
[ 1.183758] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.204272] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.204582] Linux agpgart interface v0.103
[ 1.204624] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.204987] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.205013] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.205163] mousedev: PS/2 mouse device common for all mice
[ 1.205202] rtc_cmos 00:01: RTC can wake from S4
[ 1.205317] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.205339] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.205347] cpuidle: using governor ladder
[ 1.205348] cpuidle: using governor menu
[ 1.205349] EFI Variables Facility v0.08 2004-May-17
[ 1.205397] drop_monitor: Initializing network drop monitor service
[ 1.205449] TCP: cubic registered
[ 1.205518] NET: Registered protocol family 10
[ 1.205632] NET: Registered protocol family 17
[ 1.205638] Key type dns_resolver registered
[ 1.205930] PM: Hibernation image not present or could not be loaded.
[ 1.205936] registered taskstats version 1
[ 1.206957] Magic number: 1:120:296
[ 1.206967] tty tty29: hash matches
[ 1.207045] rtc_cmos 00:01: setting system clock to 2013-06-17 20:15:05 UTC (1371500105)
[ 1.207837] Freeing unused kernel memory: 1092k freed
[ 1.208024] Write protecting the kernel read-only data: 8192k
[ 1.210116] Freeing unused kernel memory: 1148k freed
[ 1.211154] Freeing unused kernel memory: 420k freed
[ 1.216520] systemd-udevd[66]: starting version 204
[ 1.217728] device-mapper: uevent: version 1.0.3
[ 1.217810] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
[ 1.218684] md: raid1 personality registered for level 1
[ 1.220485] [drm] Initialized drm 1.1.0 20060810
[ 1.223658] [drm] radeon kernel modesetting enabled.
[ 1.223728] checking generic (d0000000 130000) vs hw (d0000000 10000000)
[ 1.223731] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 1.223743] Console: switching to colour dummy device 80x25
[ 1.224011] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68BA 0x1043:0x03FE).
[ 1.224023] [drm] register mmio base: 0xFE9E0000
[ 1.224024] [drm] register mmio size: 131072
[ 1.224653] ATOM BIOS: 68BA.12.20.0.50.AS02.U128
[ 1.224689] radeon 0000:05:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 1.224691] radeon 0000:05:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 1.231083] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 1.231088] [drm] RAM width 128bits DDR
[ 1.231166] [TTM] Zone kernel: Available graphics memory: 8218350 kiB
[ 1.231167] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.231168] [TTM] Initializing pool allocator
[ 1.231172] [TTM] Initializing DMA pool allocator
[ 1.231196] [drm] radeon: 1024M of VRAM memory ready
[ 1.231197] [drm] radeon: 512M of GTT memory ready.
[ 1.231211] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.231779] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 1.231839] [drm] Loading JUNIPER Microcode
[ 1.238364] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.243582] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.243669] radeon 0000:05:00.0: WB enabled
[ 1.243671] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88042081bc00
[ 1.243673] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88042081bc0c
[ 1.243675] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.243676] [drm] Driver supports precise vblank timestamp query.
[ 1.243704] radeon 0000:05:00.0: irq 44 for MSI/MSI-X
[ 1.243711] radeon 0000:05:00.0: radeon: using MSI.
[ 1.243730] [drm] radeon: irq initialized.
[ 1.259929] [drm] ring test on 0 succeeded in 0 usecs
[ 1.259985] [drm] ring test on 3 succeeded in 1 usecs
[ 1.260036] [drm] Enabling audio support
[ 1.260055] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.260073] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.260465] [drm] Radeon Display Connectors
[ 1.260466] [drm] Connector 0:
[ 1.260467] [drm] HDMI-A-1
[ 1.260468] [drm] HPD4
[ 1.260470] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.260471] [drm] Encoders:
[ 1.260471] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.260472] [drm] Connector 1:
[ 1.260473] [drm] DVI-I-1
[ 1.260474] [drm] HPD1
[ 1.260475] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.260475] [drm] Encoders:
[ 1.260476] [drm] DFP2: INTERNAL_UNIPHY1
[ 1.260477] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.260478] [drm] Connector 2:
[ 1.260478] [drm] VGA-1
[ 1.260480] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.260481] [drm] Encoders:
[ 1.260482] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 1.260529] [drm] Internal thermal controller with fan control
[ 1.260586] [drm] radeon: power management initialized
[ 1.338618] [drm] fb mappable at 0xD0142000
[ 1.338620] [drm] vram apper at 0xD0000000
[ 1.338621] [drm] size 8294400
[ 1.338621] [drm] fb depth is 24
[ 1.338622] [drm] pitch is 7680
[ 1.338689] fbcon: radeondrmfb (fb0) is primary device
[ 1.543962] Console: switching to colour frame buffer device 240x67
[ 1.549072] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[ 1.549073] radeon 0000:05:00.0: registered panic notifier
[ 1.549077] [drm] Initialized radeon 2.30.0 20080528 for 0000:05:00.0 on minor 0
[ 1.550830] AVX instructions are not detected.
[ 1.551744] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.571433] SCSI subsystem initialized
[ 1.573198] ACPI: bus type ATA registered
[ 1.573287] libata version 3.00 loaded.
[ 1.574102] ACPI: bus type USB registered
[ 1.574225] usbcore: registered new interface driver usbfs
[ 1.574234] usbcore: registered new interface driver hub
[ 1.574352] usbcore: registered new device driver usb
[ 1.574980] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.575108] scsi0 : pata_jmicron
[ 1.575462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.575566] ehci-pci: EHCI PCI platform driver
[ 1.575620] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.575629] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.575640] QUIRK: Enable AMD PLL fix
[ 1.575658] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe5f7000
[ 1.575818] scsi1 : pata_jmicron
[ 1.576021] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.576026] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 1.576173] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 1.576178] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 1.576183] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 1.576188] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 1.576193] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 1.576198] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 1.576202] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 1.576338] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.576340] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.576459] xHCI xhci_add_endpoint called for root hub
[ 1.576461] xHCI xhci_check_bandwidth called for root hub
[ 1.576546] hub 2-0:1.0: USB hub found
[ 1.576553] hub 2-0:1.0: 2 ports detected
[ 1.576712] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.576715] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 1.579647] xHCI xhci_add_endpoint called for root hub
[ 1.579648] xHCI xhci_check_bandwidth called for root hub
[ 1.579683] hub 3-0:1.0: USB hub found
[ 1.579692] hub 3-0:1.0: 2 ports detected
[ 1.630858] hub 1-0:1.0: USB hub found
[ 1.630863] hub 1-0:1.0: 5 ports detected
[ 1.631075] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.631080] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.631094] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fc000
[ 1.687535] hub 4-0:1.0: USB hub found
[ 1.687540] hub 4-0:1.0: 5 ports detected
[ 1.687725] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.687730] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.687742] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5fd000
[ 1.740671] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55L, 1.03, max UDMA/66
[ 1.740677] ata1.01: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 1.744774] hub 5-0:1.0: USB hub found
[ 1.744779] hub 5-0:1.0: 2 ports detected
[ 1.744926] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.744931] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 1.744944] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe5ff000
[ 1.753971] ata1.00: configured for UDMA/66
[ 1.767223] ata1.01: configured for UDMA/33
[ 1.771259] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55L 1.03 PQ: 0 ANSI: 5
[ 1.771985] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 1.775346] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.775348] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.775508] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.776395] sr1: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 1.776557] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.800881] hub 6-0:1.0: USB hub found
[ 1.800887] hub 6-0:1.0: 4 ports detected
[ 1.801082] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.801087] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 7
[ 1.801090] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.801102] ehci-pci 0000:00:12.2: debug port 1
[ 1.801127] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe5fe400
[ 1.810093] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.810200] hub 7-0:1.0: USB hub found
[ 1.810203] hub 7-0:1.0: 5 ports detected
[ 1.810397] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.810402] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 8
[ 1.810404] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.810414] ehci-pci 0000:00:13.2: debug port 1
[ 1.810435] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe5fe800
[ 1.820100] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.820208] hub 8-0:1.0: USB hub found
[ 1.820211] hub 8-0:1.0: 5 ports detected
[ 1.820378] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.820383] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 9
[ 1.820385] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.820394] ehci-pci 0000:00:16.2: debug port 1
[ 1.820414] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe5fec00
[ 1.830126] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.830234] hub 9-0:1.0: USB hub found
[ 1.830236] hub 9-0:1.0: 4 ports detected
[ 1.830344] ahci 0000:00:11.0: version 3.0
[ 1.830463] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[ 1.830564] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.830567] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.831341] scsi2 : ahci
[ 1.831401] scsi3 : ahci
[ 1.831453] scsi4 : ahci
[ 1.831510] scsi5 : ahci
[ 1.831561] scsi6 : ahci
[ 1.831614] scsi7 : ahci
[ 1.831647] ata3: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe100 irq 52
[ 1.831650] ata4: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe180 irq 52
[ 1.831652] ata5: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe200 irq 52
[ 1.831653] ata6: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe280 irq 52
[ 1.831655] ata7: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe300 irq 52
[ 1.831658] ata8: SATA max UDMA/133 abar m1024@0xfe5fe000 port 0xfe5fe380 irq 52
[ 2.150221] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.166824] tsc: Refined TSC clocksource calibration: 3210.668 MHz
[ 2.166833] Switching to clocksource tsc
[ 2.316872] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.316895] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.316918] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.316942] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.316965] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.318023] ata7.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[ 2.318026] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.318484] ata5.00: ATA-8: ST31000340AS, SD15, max UDMA/133
[ 2.318486] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.319405] ata7.00: configured for UDMA/133
[ 2.319745] ata3.00: ATA-7: WDC WD1500AHFD-00RAR5, 21.07QR5, max UDMA/133
[ 2.319747] ata3.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.320091] ata4.00: ATA-8: WDC WD1500HLFS-01G6U4, 04.04V06, max UDMA/133
[ 2.320092] ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.320317] ata5.00: configured for UDMA/133
[ 2.322569] ata6.00: ATA-8: ST1000DM005 HD103SJ, 1AJ100E5, max UDMA/133
[ 2.322571] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.323221] ata3.00: configured for UDMA/133
[ 2.323342] scsi 2:0:0:0: Direct-Access ATA WDC WD1500AHFD-0 21.0 PQ: 0 ANSI: 5
[ 2.324026] sd 2:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB)
[ 2.324109] sd 2:0:0:0: [sda] Write Protect is off
[ 2.324112] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.324148] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.324465] ata4.00: configured for UDMA/133
[ 2.324568] scsi 3:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
[ 2.324709] sd 3:0:0:0: [sdb] 293046768 512-byte logical blocks: (150 GB/139 GiB)
[ 2.324775] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.324777] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.324812] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.324821] scsi 4:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5
[ 2.325264] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.325322] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.325325] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.325351] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.328013] sdc: sdc1
[ 2.328258] ata6.00: configured for UDMA/133
[ 2.328345] scsi 5:0:0:0: Direct-Access ATA ST1000DM005 HD10 1AJ1 PQ: 0 ANSI: 5
[ 2.328458] sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.328547] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.328550] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.328567] scsi 6:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5
[ 2.328579] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.328581] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.328979] sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.329043] sd 6:0:0:0: [sde] Write Protect is off
[ 2.329045] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.329069] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.333740] sdd: sdd1
[ 2.334008] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.338873] sde: sde1
[ 2.339153] sd 6:0:0:0: [sde] Attached SCSI disk
[ 2.352712] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 2.353194] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.363364] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > sdb4
[ 2.363842] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.484347] md: bind<sde1>
[ 2.492644] md: bind<sdd1>
[ 2.493906] md: bind<sdb4>
[ 2.495837] md: bind<sdb1>
[ 2.498041] md: bind<sdb2>
[ 2.500213] md: bind<sdb6>
[ 2.501310] md: bind<sdb5>
[ 2.502410] md: bind<sdb7>
[ 2.560860] md: bind<sda6>
[ 2.561903] md/raid1:md6: active with 2 out of 2 mirrors
[ 2.561917] md6: detected capacity change from 0 to 8588873728
[ 2.563625] md: bind<sdc1>
[ 2.593848] md6: unknown partition table
[ 2.620235] raid6: sse2x1 4601 MB/s
[ 2.673570] usb 8-1: new high-speed USB device number 2 using ehci-pci
[ 2.676870] raid6: sse2x2 7246 MB/s
[ 2.733545] raid6: sse2x4 8107 MB/s
[ 2.733546] raid6: using algorithm sse2x4 (8107 MB/s)
[ 2.733547] raid6: using intx1 recovery algorithm
[ 2.733694] async_tx: api initialized (async)
[ 2.733826] xor: measuring software checksum speed
[ 2.766907] prefetch64-sse: 14478.000 MB/sec
[ 2.800219] generic_sse: 13857.600 MB/sec
[ 2.800220] xor: using function: prefetch64-sse (14478.000 MB/sec)
[ 2.801069] md: raid6 personality registered for level 6
[ 2.801071] md: raid5 personality registered for level 5
[ 2.801072] md: raid4 personality registered for level 4
[ 2.801215] md/raid:md3: device sdc1 operational as raid disk 2
[ 2.801218] md/raid:md3: device sdd1 operational as raid disk 0
[ 2.801219] md/raid:md3: device sde1 operational as raid disk 1
[ 2.801432] md/raid:md3: allocated 3272kB
[ 2.801478] md/raid:md3: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 2.801479] RAID conf printout:
[ 2.801480] --- level:5 rd:3 wd:3
[ 2.801481] disk 0, o:1, dev:sdd1
[ 2.801482] disk 1, o:1, dev:sde1
[ 2.801483] disk 2, o:1, dev:sdc1
[ 2.801499] md3: detected capacity change from 0 to 2000138797056
[ 2.811326] md3: unknown partition table
[ 2.830352] md: bind<sda1>
[ 2.831401] md/raid1:md1: active with 2 out of 2 mirrors
[ 2.831429] md1: detected capacity change from 0 to 67043328
[ 2.837044] md1: unknown partition table
[ 2.843700] md: bind<sda7>
[ 2.844754] md/raid1:md7: active with 2 out of 2 mirrors
[ 2.844768] md7: detected capacity change from 0 to 4290760704
[ 2.845645] md: bind<sda2>
[ 2.846654] md/raid1:md2: active with 2 out of 2 mirrors
[ 2.846667] md2: detected capacity change from 0 to 2146422784
[ 2.862139] md7: unknown partition table
[ 2.872434] md: bind<sda4>
[ 2.873461] md/raid1:md4: active with 2 out of 2 mirrors
[ 2.873476] md4: detected capacity change from 0 to 122053378048
[ 2.874007] md2: unknown partition table
[ 2.889400] Initializing USB Mass Storage driver...
[ 2.889524] scsi8 : usb-storage 8-1:1.0
[ 2.889596] usbcore: registered new interface driver usb-storage
[ 2.889597] USB Mass Storage support registered.
[ 2.915578] md4: unknown partition table
[ 2.927038] md: bind<sda5>
[ 2.928198] md/raid1:md5: active with 2 out of 2 mirrors
[ 2.928212] md5: detected capacity change from 0 to 12883779584
[ 2.993651] usb 8-4: new high-speed USB device number 3 using ehci-pci
[ 3.002235] md5: unknown partition table
[ 3.119773] scsi9 : usb-storage 8-4:1.0
[ 3.623789] usb 4-5: new full-speed USB device number 2 using ohci_hcd
[ 3.892359] scsi 8:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
[ 3.893731] sd 8:0:0:0: [sdf] 65536000 512-byte logical blocks: (33.5 GB/31.2 GiB)
[ 3.894343] sd 8:0:0:0: [sdf] Write Protect is off
[ 3.894346] sd 8:0:0:0: [sdf] Mode Sense: 03 00 00 00
[ 3.894990] sd 8:0:0:0: [sdf] No Caching mode page present
[ 3.895018] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.897857] sd 8:0:0:0: [sdf] No Caching mode page present
[ 3.897883] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.924732] sdf: sdf1
[ 3.928613] sd 8:0:0:0: [sdf] No Caching mode page present
[ 3.928639] sd 8:0:0:0: [sdf] Assuming drive cache: write through
[ 3.928665] sd 8:0:0:0: [sdf] Attached SCSI removable disk
[ 4.121379] scsi 9:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 4.122747] scsi 9:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 4.124616] scsi 9:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 4.127113] scsi 9:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 4.135273] sd 9:0:0:0: [sdg] Attached SCSI removable disk
[ 4.137735] sd 9:0:0:1: [sdh] Attached SCSI removable disk
[ 4.139624] sd 9:0:0:2: [sdi] Attached SCSI removable disk
[ 4.140873] sd 9:0:0:3: [sdj] Attached SCSI removable disk
[ 4.243904] usb 1-5: new full-speed USB device number 2 using ohci_hcd
[ 6.259953] bio: create slab <bio-1> at 1
[ 6.437936] bio: create slab <bio-1> at 1
[ 6.524461] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
[ 6.524477] REISERFS (device dm-0): using ordered data mode
[ 6.524478] reiserfs: using flush barriers
[ 6.530254] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 6.530630] REISERFS (device dm-0): checking transaction log (dm-0)
[ 6.586126] REISERFS (device dm-0): Using r5 hash to sort names
[ 8.650945] systemd-udevd[320]: starting version 204
[ 8.892597] sdhci: Secure Digital Host Controller Interface driver
[ 8.892599] sdhci: Copyright(c) Pierre Ossman
[ 8.901571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.902459] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 8.915340] fuse init (API version 7.21)
[ 8.945154] loop: module loaded
[ 8.954456] ACPI: processor limited to max C-state 1
[ 8.972705] powernow-k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[ 9.093100] acpi-cpufreq: overriding BIOS provided _PSD data
[ 9.287999] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 9.288017] ACPI: Power Button [PWRB]
[ 9.288615] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.288633] ACPI: Power Button [PWRF]
[ 9.309972] wmi: Mapper loaded
[ 9.339825] ATK0110 ATK0110:00: EC enabled
[ 9.363123] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 9.364000] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 9.364280] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 9.365213] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[ 9.365261] snd_hda_intel 0000:05:00.1: irq 53 for MSI/MSI-X
[ 9.447348] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:05:00.1/sound/card1/input6
[ 9.530152] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20130117/utaddress-251)
[ 9.530170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.582240] ssb: Found chip with id 0x4306, rev 0x03 and package 0x00
[ 9.582255] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 9.582265] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 9.582274] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 9.582283] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 9.582292] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 9.585795] ssb: Sonics Silicon Backplane found on PCI device 0000:02:06.0
[ 9.597991] MCE: In-kernel MCE decoding enabled.
[ 9.602641] EDAC MC: Ver: 3.0.0
[ 9.606098] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.606424] r8169 0000:01:00.0: irq 54 for MSI/MSI-X
[ 9.606790] r8169 0000:01:00.0 eth0: RTL8168e/8111e at 0xffffc90013d46000, 48:5b:39:ca:b6:46, XID 0c100000 IRQ 54
[ 9.606797] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.610306] AMD64 EDAC driver v3.4.0
[ 9.610385] EDAC amd64: DRAM ECC disabled.
[ 9.610418] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 9.669939] vboxdrv: Found 6 processor cores.
[ 9.670195] vboxdrv: fAsync=0 offMin=0x8ef offMax=0x3fd9
[ 9.670262] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 9.670263] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[ 9.670899] microcode: CPU0: patch_level=0x010000bf
[ 9.682925] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 9.683031] sp5100_tco: PCI Revision ID: 0x41
[ 9.683089] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 9.683103] sp5100_tco: Last reboot was not triggered by watchdog.
[ 9.683212] sp5100_tco: initialized (0xffffc90014d96b00). heartbeat=60 sec (nowayout=0)
[ 9.733407] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 9.733703] microcode: CPU1: patch_level=0x010000bf
[ 9.733854] microcode: CPU2: patch_level=0x010000bf
[ 9.734119] microcode: CPU3: patch_level=0x010000bf
[ 9.734165] microcode: CPU4: patch_level=0x010000bf
[ 9.734186] microcode: CPU5: patch_level=0x010000bf
[ 9.734342] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.745360] kvm: Nested Virtualization enabled
[ 9.745364] kvm: Nested Paging enabled
[ 9.822608] systemd-udevd[447]: failed to execute '/usr/lib/udev/blkid' 'blkid ': No such file or directory
[ 9.837315] systemd-udevd[451]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdf': No such file or directory
[ 10.065623] media: Linux media interface: v0.10
[ 10.074496] Linux video capture interface: v2.00
[ 10.082272] gspca_main: v2.14.0 registered
[ 10.086077] gspca_main: STV06xx-2.14.0 probing 046d:08f0
[ 10.086084] gspca_stv06xx: st6422 sensor detected
[ 10.136408] systemd-udevd[508]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdi': No such file or directory
[ 10.182041] systemd-udevd[525]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdf1': No such file or directory
[ 10.216697] systemd-udevd[544]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdb7': No such file or directory
[ 10.241330] Bluetooth: Core ver 2.16
[ 10.241347] NET: Registered protocol family 31
[ 10.241348] Bluetooth: HCI device and connection manager initialized
[ 10.241357] Bluetooth: HCI socket layer initialized
[ 10.241359] Bluetooth: L2CAP socket layer initialized
[ 10.241363] Bluetooth: SCO socket layer initialized
[ 10.280260] usbcore: registered new interface driver btusb
[ 10.299795] systemd-udevd[600]: failed to execute '/usr/lib/udev/blkid' 'blkid /dev/sdd1': No such file or directory
[ 10.423003] input: STV06xx as /devices/pci0000:00/0000:00:12.0/usb1/1-5/input/input7
[ 10.423357] usbcore: registered new interface driver STV06xx
[ 10.535549] cfg80211: Calling CRDA to update world regulatory domain
[ 10.536658] systemd-sysctl[682]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 10.649374] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 10.668502] b43-phy0: Found PHY: Analog 2, Type 2 (G), Revision 2
[ 10.688778] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 10.756972] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.797375] systemd-sysctl[709]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
[ 10.878640] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input8
[ 16.369709] reiserfs: enabling write barrier flush mode
[ 16.695367] EXT4-fs (md1): mounting ext3 file system using the ext4 subsystem
[ 16.711651] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.721701] REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
[ 16.721742] REISERFS (device dm-2): using ordered data mode
[ 16.721746] reiserfs: using flush barriers
[ 16.727771] REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 16.728785] REISERFS (device dm-2): checking transaction log (dm-2)
[ 16.787812] REISERFS (device dm-2): Using r5 hash to sort names
[ 16.989853] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 17.012276] XFS (dm-4): Mounting Filesystem
[ 17.243475] XFS (dm-4): Starting recovery (logdev: internal)
[ 17.598719] XFS (dm-4): Ending recovery (logdev: internal)
[ 17.631060] XFS (dm-5): Mounting Filesystem
[ 17.978546] XFS (dm-5): Ending clean mount
And the