[SOLVED] Rawtherapee doens't work
Hello guys,
Installing rawtherapee from the official repo, it doesn't start.
Here what I have from terminal:
$ rawtherapee
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_S_construct null not valid
Aborted (core dumped)
How could I solve?
Thanks.
Last edited by Astroarch (2014-04-09 05:37:57)
stqn wrote:
Works on my 64 bit install. Could it be a locale problem? I’m using en_GB.UTF-8.
You could also try strace to see if that gives you more info about the problem.
Great stqn!!!
You gave me the idea to look into the locale.gen file and the syntax was wrong (us_US... instead of en_US, I don't kno why and how...).
I regenerated the locale.gen and now it works perfeclty!
Thanks!
Similar Messages
-
Event double -click doens't work
Dear All,
Pls help event double -click doens't work.
What can the reason be for it ?
Regards
Ilhan
data tree1 type ref to cl_gui_alv_tree.
data mr_toolbar type ref to cl_gui_toolbar.
include <icon>.
data: gt_sflight type ZQMCOMP occurs 0, "Output-Table
gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
ok_code like sy-ucomm. "OK-Code
* TREE_EVENT_RECEIVER *
class tree_event_receiver definition.
public section.
methods on_doubleclick
for event link_click of cl_gui_alv_tree
importing node_key fieldname.
ENDCLASS. "lcl_handler DEFINITION
* CLASS tree_event_receiver IMPLEMENTATION
class tree_event_receiver implementation.
METHOD on_doubleclick.
MESSAGE I000(38) WITH fieldname.
ENDMETHOD. "on_doubleclick
endclass.
start-of-selection.
end-of-selection.
call screen 100.
*& Module PBO OUTPUT
* process before output
module pbo output.
set pf-status 'MAIN100'.
if tree1 is initial.
perform init_tree.
endif.
call method cl_gui_cfw=>flush.
endmodule. " PBO OUTPUT
*& Module PAI INPUT
* process after input
module pai input.
case ok_code.
when 'EXIT' or 'BACK' or 'CANC'.
perform exit_program.
when others.
call method cl_gui_cfw=>dispatch.
endcase.
clear ok_code.
call method cl_gui_cfw=>flush.
endmodule. " PAI INPUT
*& Form build_fieldcatalog
* build fieldcatalog for structure sflight
form build_fieldcatalog.
data: ls_fieldcatalog type lvc_s_fcat.
ls_fieldcatalog-fieldname = 'DUNS'.
ls_fieldcatalog-col_pos = 7.
ls_fieldcatalog-coltext = 'Duns'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MONAT'.
ls_fieldcatalog-col_pos = 8.
ls_fieldcatalog-coltext = 'Monat'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ZE'.
ls_fieldcatalog-col_pos = 13.
ls_fieldcatalog-coltext = 'Ze'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MATKOSTEN'.
ls_fieldcatalog-col_pos = 14.
ls_fieldcatalog-coltext = 'Mat.Kosten'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ANTEIL'.
ls_fieldcatalog-col_pos = 15.
ls_fieldcatalog-coltext = 'Anteil'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESMAT'.
ls_fieldcatalog-col_pos = 16.
ls_fieldcatalog-coltext = 'Ges.Mat'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESLOH'.
ls_fieldcatalog-col_pos = 17.
ls_fieldcatalog-coltext = 'Ges.Lohn'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESAMT'.
ls_fieldcatalog-col_pos = 19.
ls_fieldcatalog-coltext = 'Gesamt'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
call function 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'ZQMCOMP'
CHANGING
ct_fieldcat = gt_fieldcatalog.
endform. " build_fieldcatalog
*& Form build_hierarchy_header
* build hierarchy-header-information
* -->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
form build_hierarchy_header changing
p_hierarchy_header type treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy-Kopf'. "#EC NOTEXT
p_hierarchy_header-tooltip =
'Hierarchy-Kopf !'.
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
endform. " build_hierarchy_header
*& Form exit_program
* free object and leave program
form exit_program.
call method tree1->free.
leave program.
endform. " exit_program
*& Form build_header
* build table for html_header
* --> p1 text
* <-- p2 text
form build_comment using
pt_list_commentary type slis_t_listheader
p_logo type sdydo_value.
data: ls_line type slis_listheader.
clear ls_line.
ls_line-typ = 'H'.
ls_line-info = 'LIBOLO '.
append ls_line to pt_list_commentary.
clear ls_line.
clear ls_line.
ls_line-typ = 'A'.
ls_line-info = 'Liste'.
append ls_line to pt_list_commentary.
* p_logo = 'ENJOYSAP_LOGO'.
endform.
* FORM create_hierarchy *
FORM create_hierarchy.
data: ls_sflight type ZQMCOMP,
lt_sflight type ZQMCOMP occurs 0.
* get data
select * from ZQMCOMP into table lt_sflight.
* sort lt_sflight by carrid connid fldate.
* add data to tree
data: l_carrid_key type lvc_nkey,
l_connid_key type lvc_nkey,
l_last_key type lvc_nkey.
loop at lt_sflight into ls_sflight.
on change of ls_sflight-KUNDE.
perform add_carrid_line using ls_sflight
changing l_carrid_key.
endon.
on change of ls_sflight-MONAT.
perform add_connid_line using ls_sflight
l_carrid_key
changing l_connid_key.
endon.
perform add_complete_line using ls_sflight
l_connid_key
changing l_last_key.
endloop.
* calculate totals
call method tree1->update_calculations.
* this method must be called to send the data to the frontend
call method tree1->frontend_update.
endform. " create_hierarchy
*& Form add_carrid_line
* add hierarchy-level 1 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_carrid_line using ps_sflight type ZQMCOMP
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
ls_sflight type ZQMCOMP.
* set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style =
cl_gui_column_tree=>style_intensifd_critical.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-KUNDE.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_carrid_line
*& Form add_connid_line
* add hierarchy-level 2 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_connid_line using ps_sflight type ZQMCOMP
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
ls_sflight type sflight.
* set item-layout
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3Y@'.
ls_item_layout-style =
cl_gui_column_tree=>style_intensified.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-MONAT.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_connid_line
*& Form add_cmplete_line
* add hierarchy-level 3 to tree
* -->P_LS_SFLIGHT sflight
* -->P_RELEATKEY relatkey
* <-->p_node_key new node-key
form add_complete_line using ps_sflight type ZQMCOMP
p_relat_key type lvc_nkey
changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value.
data: lt_item_layout type lvc_t_layi,
ls_item_layout type lvc_s_layi.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
l_node_text = ps_sflight-QMART.
call method tree1->add_node
exporting
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
is_outtab_line = ps_sflight
i_node_text = l_node_text
it_item_layout = lt_item_layout
importing
e_new_node_key = p_node_key.
endform. " add_complete_line
*& Form register_events
* text
* --> p1 text
* <-- p2 text
form register_events.
data: lt_events type cntl_simple_events,
l_event type cntl_simple_event.
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
append L_EVENT to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
append L_EVENT to lt_events.
* set Handler
data: l_event_receiver type ref to tree_event_receiver.
create object l_event_receiver.
set handler l_event_receiver->on_doubleclick for tree1.
call method tree1->set_registered_events
exporting
events = lt_events
exceptions
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
endform. " register_events
*& Form change_toolbar
* text
* --> p1 text
* <-- p2 text
form change_toolbar.
* get toolbar control
call method tree1->get_toolbar_object
importing
er_toolbar = mr_toolbar.
check not mr_toolbar is initial.
* add seperator to toolbar
call method mr_toolbar->add_button
exporting
fcode = ''
icon = ''
butn_type = cntb_btype_sep
text = ''
quickinfo = 'This is a Seperator'. "#EC NOTEXT
* add Standard Button to toolbar (for Delete Subtree)
call method mr_toolbar->add_button
exporting
fcode = 'DELETE'
icon = '@18@'
butn_type = cntb_btype_button
text = ''
quickinfo = 'Delete subtree'. "#EC NOTEXT
* add Dropdown Button to toolbar (for Insert Line)
call method mr_toolbar->add_button
exporting
fcode = 'INSERT_LC'
icon = '@17@'
butn_type = cntb_btype_dropdown
text = ''
quickinfo = 'Insert Line'. "#EC NOTEXT
endform. " change_toolbar
*& Form init_tree
* text
* --> p1 text
* <-- p2 text
FORM init_tree.
* create fieldcatalog for structure sflight
perform build_fieldcatalog.
* create container for alv-tree
data: l_tree_container_name(30) type c,
l_custom_container type ref to cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
if sy-batch is initial.
create object l_custom_container
exporting
container_name = l_tree_container_name
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
endif.
* create tree control
create object tree1
exporting
parent = l_custom_container
node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
item_selection = 'X'
no_html_header = ''
no_toolbar = ''
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
if sy-subrc <> 0.
message x208(00) with 'ERROR'. "#EC NOTEXT
endif.
* create Hierarchy-header
data l_hierarchy_header type treev_hhdr.
perform build_hierarchy_header changing l_hierarchy_header.
* create info-table for html-header
data: lt_list_commentary type slis_t_listheader,
l_logo type sdydo_value.
perform build_comment using
lt_list_commentary
l_logo.
* repid for saving variants
data: ls_variant type disvariant.
ls_variant-report = sy-repid.
* create emty tree-control
call method tree1->set_table_for_first_display
exporting
I_STRUCTURE_NAME = 'ZQMCOMP'
is_hierarchy_header = l_hierarchy_header
it_list_commentary = lt_list_commentary
* i_logo = l_logo
i_background_id = 'ALV_BACKGROUND'
i_save = 'A'
is_variant = ls_variant
changing
it_outtab = gt_sflight "table must be emty !!
it_fieldcatalog = gt_fieldcatalog.
* create hierarchy
perform create_hierarchy.
* add own functioncodes to the toolbar
perform change_toolbar.
* register events
perform register_events.
* adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " init_treeHi,
to do so, you need to declare those fields in the form CREATE_HIERARCHY.
For example, to add FLDATE node, you should do:
ON CHANGE OF LS_SFLIGHT-CARRID.
PERFORM ADD_CARRID_LINE USING LS_SFLIGHT
CHANGING L_CARRID_KEY.
ENDON.
ON CHANGE OF LS_SFLIGHT-CONNID.
PERFORM ADD_CONNID_LINE USING LS_SFLIGHT
L_CARRID_KEY
CHANGING L_CONNID_KEY.
ENDON.
ON CHANGE OF LS_SFLIGHT-FLDATE.
PERFORM ADD_FLDATE_LINE USING LS_SFLIGHT
L_CONNID_KEY
CHANGING L_FLDATE_KEY.
ENDON.
ON CHANGE OF LS_SFLIGHT-PRICE.
PERFORM ADD_PRICE_LINE USING LS_SFLIGHT
L_FLDATE_KEY
CHANGING L_PRICE_KEY.
ENDON.
and then create the new FORMS PERFORM ADD_PRICE_LINE and
PERFORM ADD_FLDATE_LINE by copy of the existent
PERFORM ADD_CONNID_LINE and change the L_NODE_TEXT in the form.
I suposed you are new to ALV's, so i have a sugestion for you.
Instead of CL_GUI_ALV_TREE try to use some examples of CL_GUI_ALV_TREE_SIMPLE. It's much more simple to understand and to work with. For example Report BCALV_TREE_SIMPLE_DEMO.
In this case, to add more nodes to the the you just need to add 3 lines of code in
perform build_sort_table.
Regards, -
My Ipod touch 5 just stopped working. The screen got black and now I can't use it or start it.
I have tried to charge it but it doens't start and when I tried to connect it with my computer it didn't work either.
I saw that you could hold down the "home" button and the "power" button at the same time but my home button doens't work so I can't do that.
Is there any other way I can fix it or do I have to go to an apple store?Try:
Turn on without Home/Power Button -
My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.
What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
-
SKY go app but doens't work. There is a problem with iOs 6. What I can do
I have an iPad I tried to use SKY go app but doens't work. There is a problem with iOs 6. What I can do
The App says that there is not internet connection, even if I'm connected.
-
After My IPod Touch 4th Geneartion was broken I had to fix the screen, which cost me a lot, after a perfect restore through the ITunes I went to connect to my IPod to the WiFi network then the WiFi ON/OFF button Doen't Work, the IPod doesn't show the on/off button in the Settings-> General -> WiFi.
And another problem I encountered during this operation was that the Games I downloaded through the ITunes doesn't work, when I click on the icon ( Game Icon) it starts an then closes in a few secondsSee:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Apple wil not help since yo took the iPod apart
Try taking it apart and look for a disconnected antenna.
Installing iPod Touch 4th Generation Wi-Fi Antenna - iFixit -
My keyboard doens't work correctly when I push numbers it appears symbols and all the letters are not good
I suspect someone or something in your house may have changed a keyboard preference. Try System Preferences - Keyboard - Keyboard tab - uncheck Use all F1......
-
Hello there, i'm new on pls/sql, so i wanted to do a procedure which execute a grant select on all tables from a specific schema, the name of the schema is TESO, and i'm creating that procedure in ASILVA schema.
The problem is when i try to execute the procedure, it doens't work it show me a message like
Informe de error:
ORA-00942: la tabla o vista no existe
ORA-06512: en "ASILVA.GRANT_SELECT_ON_TABLE_SCHEMA", línea 6
ORA-06512: en línea 1
00942. 00000 - "table or view does not exist"
*Cause:
*Action:
that is when i execute: execute GRANT_SELECT_ON_TABLE_SCHEMA
This is my procedure, and i didn't have any problem when i created it:
CREATE OR REPLACE PROCEDURE GRANT_SELECT_ON_TABLE_SCHEMA
AS
BEGIN
FOR x IN (select * from dba_tables where owner ='TESO')
LOOP
EXECUTE IMMEDIATE 'GRANT SELECT ON TESO.'|| x.table_name ||' TO fswbd';
END LOOP;
END GRANT_SELECT_ON_TABLE_SCHEMA;
Please if anyone can help my, i would be gratefull.
Edited by: Ng! on 21-dic-2011 14:39
Edited by: Ng! on 21-dic-2011 14:39
Edited by: Ng! on 21-dic-2011 14:40That the user can select from the tables is irrelevant to whether they have permission to access them via PL/SQL.
SQL respects privileges granted via roles ... PL/SQL requires explicit grants. -
I bought this phone mainly because it's big screen and GPS.
But it just doen't work. At all.
I left only GPS connection (A-GPS, Network etc. - are off).
In Satellites-Status is finds sometimes up to 5 satellites with gray bars. (as I understand it means weak signal) and then nothing happens.
Last night I went to railway station, which is high. The sky was absolutely clear with stars.
No high buildings around. I holded the phone in the center (not to cover the antenne).
And nothing happened. Only 4-5 gray bars maximum. Even after 10 minutes.
I'm thinking about sending it back.
Another problem - is one of the most stupidest programs I've ever seen - OVI-Suit.
Absolutely illogical, insanely slow and fulled with mistakes.
(The only program which is worse is Corel Draw Painter).
And please, tell me someone, why the Options for GPS are in the Menu-> Applications-> My Position-> Options,
but the Maps themselfs are in Menu-> Maps?
I've heard just yesterday, that Nokia looses its market share very fast.
And somehow I understand why.Hi DexterStJock
If you are not going to utilize the Assisted GPS feature and rely solely on Integrated GPS you can expect initial positional fix to take a considerable time to acquire but subsequent lock-on will be much more rapid. If you haven't yet got a satellite lock-on don't expect a new location to be better as you could be anywhere in the world as far as it is concerned. Unfortunately GPS antenna size within a mobile device has to be compromised due to space limitations and unfair to compare with car sat nav unit.
You are correct that "Positioning methods" are found in Menu > Applications > Location but this is independent of OVI Maps as other applications can utilize it's features.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
CTRL + F for folders doen't work in CS5
Hi,
When I used my CS 3 Dreamweaver, I could click in the folder list on a folder an pressd CTRL + F so I could search a word in this folder and all subfolder.
But since I upgraded to CS 5 it doen's work anymore.
I alway have to set the folder manually.
Thanks for help
pwIt's a known issue. Hopefully, it will be fixed in an updater (if there is one) or the next version.
-
[SOLVED] netctl fails; wpa_supplicant works
Hi,
I ran into something, and managed to get it working, but I'm curious about something that happened in the process.
I couldn't connect to a local home network using netctl (with wifi-menu), but I can connect using wpa_supplicant/dhcpcd and also using a wpa_configsection profile for netctl. I think the /etc/netctl/wlan0-CourseX file is okay (passwords changed below).
wlan0-CourseX profile:
Description='Automatically generated profile by wifi-menu'
Interface=wlan0
Connection=wireless
Security=wpa
ESSID=CourseX
IP=dhcp
Key=Password
When I do "sudo netctl start wlan0-CourseX", I get
Job for netctl@wlan0\x2dCourseX.service failed. See 'systemctl status netctl@wlan0\x2dCourseX.service' and 'journalctl -xn' for details.
which produces
-- Logs begin at Sat 2013-01-12 17:21:33 EST, end at Mon 2013-06-03 19:41:37 EDT. --
Jun 03 19:39:31 arch network[5665]: Failed to bring the network up for profile 'wlan0-CourseX'
Jun 03 19:39:31 arch systemd[1]: netctl@wlan0\x2dCourseX.service: main process exited, code=exited, status=1/FAILURE
Jun 03 19:39:31 arch systemd[1]: Failed to start Networking for netctl profile wlan0-CourseX.
-- Subject: Unit netctl@wlan0\x2dCourseX.service has failed
-- Defined-By: systemd
-- Support: [url]http://lists.freedesktop.org/mailman/listinfo/systemd-devel[/url]
-- Documentation: [url]http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d[/url]
-- Unit netctl@wlan0\x2dCourseX.service has failed.
-- The result is failed.
Jun 03 19:39:31 arch systemd[1]: Unit netctl@wlan0\x2dCourseX.service entered failed state.
Jun 03 19:39:31 arch sudo[5658]: pam_unix(sudo:session): session closed for user root
Jun 03 19:39:32 arch sudo[5856]: raymond : TTY=pts/0 ; PWD=/etc/netctl/examples ; USER=root ; COMMAND=/usr/bin/journalctl -xn
Jun 03 19:39:32 arch sudo[5856]: pam_unix(sudo:session): session opened for user root by (uid=0)
Jun 03 19:41:17 arch sudo[5856]: pam_unix(sudo:session): session closed for user root
Jun 03 19:41:37 arch sudo[5861]: raymond : TTY=pts/0 ; PWD=/etc/netctl/examples ; USER=root ; COMMAND=/usr/bin/journalctl -xn
Jun 03 19:41:37 arch sudo[5861]: pam_unix(sudo:session): session opened for user root by (uid=0)
However, when I use wpa_supplicant:
# wpa_supplicant -Dwext -B -i wlan0 -c /etc/wpa_supplicant.conf
Successfully initialized wpa_supplicant
# dhcpcd
dhcpcd[5918]: version 5.6.8 starting
dhcpcd[5918]: wlan0: sending IPv6 Router Solicitation
dhcpcd[5918]: wlan0: rebinding lease of 18.189.107.167
dhcpcd[5918]: eth0: waiting for carrier
dhcpcd[5918]: wlan0: reject NAK via 192.168.1.1
dhcpcd[5918]: wlan0: reject NAK via 192.168.1.1
dhcpcd[5918]: wlan0: sending IPv6 Router Solicitation
dhcpcd[5918]: wlan0: broadcasting for a lease
dhcpcd[5918]: wlan0: offered 192.168.1.2 from 192.168.1.1
dhcpcd[5918]: wlan0: sending IPv6 Router Solicitation
dhcpcd[5918]: wlan0: acknowledged 192.168.1.2 from 192.168.1.1
dhcpcd[5918]: wlan0: checking for 192.168.1.2
dhcpcd[5918]: wlan0: sending IPv6 Router Solicitation
dhcpcd[5918]: wlan0: no IPv6 Routers available
dhcpcd[5918]: wlan0: leased 192.168.1.2 for 86400 seconds
dhcpcd[5918]: forked to background, child pid 6065
with the file
/etc/wpa_supplicant.conf:
network={
ssid="CourseX"
psk="Password"
pairwise=TKIP
group=TKIP
priority=20
everything works.
Because wpa_supplicant works, I thought netctl might if I use a configsection (looks more like wpa_supplicant file I referenced?) With this file for netctl,
wlan0-CourseX_cnfgsec profile:
Description='A configuration for WPA2 with PEAP'
Interface=wlan0
Connection=wireless
Security=wpa-configsection
IP=dhcp
WPAConfigSection=(
'ssid="CourseX"'
'group=TKIP'
'pairwise=TKIP'
'psk="Password"'
'priority=20'
the connection works fine with "sudo netctl start wlan0-CourseX_cnfgsec".
So, I'm curious why the wifi-menu generated profile wouldn't work, but one with a configsection works fine.
Thanks!
Last edited by muon (2013-06-04 17:33:07)@luisgmarine, I have tried it with and without the single quotes -- no difference. Thanks for the idea though.
@progandy, Interesting. I'm not sure how to figure out if it's an issue with the router communication or not, though.
Anyway, thanks for the ideas and thoughts. I'll mark this as solved, because it is working; I was just curious to see if there was an apparent explanation. -
hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help
Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
TS3871 I've tried this but it doen't work.
I've tried this but it doen't work. I can't open the domain file. When i try iWeb opens but with no content! Please help. [email protected]
Even with your detailed description of what "this" is we're only guessing at what your problem is. Therefore try this guess fix:
In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?
Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.
-
Solved rEFInd does not work after update
Hello.
Today, I updated rEFInd with yaourt.
After the update, I copied the new files in /boot/efi.
I rebooted and now rEFInd does not work.
The only message I got is:
rEFInd - Initializing
After 2-3 minutes, the computer reboots and I got the same error message.
To boot, I had to use the UEFI shell.
First of all, is there a log file for rEFInd?
It is not easy at all to debug it when we don't have any error messages.
After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
Do you know what to do to solve my problem?
Thanks for your help.
Last edited by antoyo (2012-11-07 23:29:55)@antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system)
Maybe you are looking for
-
I have copied photo's to a folder on the iPad. How can I view these foto's?
I have copied some files from an USB memory card to an iPad. I did this by first copying the foto's and movies to my computer. Then i connected the iPad to my USB port, and copied the foto's and movies to a folder on the iPad. I copied them to the fo
-
Error while trying to login to ecc6: Caller J2EE_ADMIN not authorized, only
After installation fo ECC6,When I am trying to connect to visual admin,I am getting given below error. I am also not able to login to NWA Application cannot be started. Details: com.sap.engine.services.deploy.container.ExceptionInfo: Naming
-
Hi friends , I have a requirement where in i need to decode values from my source table while inserting them into my target table. I usually do my task by making functions (don't use case and decode) . My first question is 1) Is using function to acc
-
Everytime I launch iTunes, a small window stating "Accessing iTune store' appears. It takes several clicks of "Stop" to close it but the reappears repeatedly. I cannot do anything else if the window is open. Please help.
-
Adobe Livecycle Download Error
I am trying to download the Adobe Livecycle Designer 7.1 file name 01200615322000000711 for GUI 6.4 using the SAP Download Manager, found under OSS Note 962763. I keep getting an error saying " The request failed: 400". I even let it run overnight. I