[SOLVED] Redis failing to start on boot

Content of redis.service:
[Unit]
Description=Advanced key-value store
After=network.target
[Service]
User=redis
Group=redis
ExecStart=/usr/bin/redis-server /etc/redis.conf
ExecStop=/usr/bin/redis-cli shutdown
CapabilityBoundingSet=
PrivateTmp=true
PrivateDevices=true
ProtectSystem=full
ProtectHome=true
NoNewPrivileges=true
RuntimeDirectory=redis
RuntimeDirectoryMode=700
[Install]
WantedBy=multi-user.target
On every boot:
Mar 09 10:03:17 carpo systemd[1]: redis.service: main process exited, code=exited, status=233/RUNTIME_DIRECTORY
Mar 09 10:03:17 carpo systemd[702]: Failed at step RUNTIME_DIRECTORY spawning /usr/bin/redis-cli: File exists
Mar 09 10:03:17 carpo systemd[1]: redis.service: control process exited, code=exited status=233
Mar 09 10:03:17 carpo systemd[1]: Unit redis.service entered failed state.
Mar 09 10:03:17 carpo systemd[1]: redis.service failed.
Restarting it manually after the boot starts it properly. RuntimeDirectory was added recently by the package. Directory /run is not persistant:
# mount | grep -e '^run'
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
I am stuck on figuring out what happens here. Did anybody else have this issue?
Last edited by kotnik (2015-03-18 09:44:48)

sharow wrote:related: https://bugs.archlinux.org/task/44067
Thank you for pointing me to that issue.
Issue is solved in version 2.8.19-4.

Similar Messages

[solved] systemd services not starting at boot (or at all)

On my router, some systemd services fail to start at boot.
The services are :
adsl (pppoe connetction on the wan interface)
shorewall (funny again for a router)
logind (brings up only tty1, and not the others with a 'timeout' error)
adsl starts fine manually after booting up
the others don't work, I have to launch shorewall with the old sysvinit rc script (and it works)
I really don't know, what happened to logind...
Last edited by scar (2012-11-30 10:20:44)

cups: avahi client failed
adsl: timeout (ppp0 running on eth0, the service did not found eth0)
shorewall: did not work by the systemctl command, only with the old rc script
I'm not sure if there was an error with logind, but I've had only tty1, not all the others (I have not touched /etc/inittab)
since this was a very old install (but up to date), I've decided to reinstall the whole thing,
Everything works
(But reinstalling does not solve any problem, it erases the problems...)
Last edited by scar (2012-11-30 10:21:20)

[SOLVED] apache daemon fails to start on boot, but rc.d restart works?

I installed apache from the official repos and followed the instructions in the wiki for configuring it. I checked to make sure the http user exists, and I /etc/hosts looks good (to me). Upon boot, the daemon fails to start and I can't load local web pages, but running "rc.d restart httpd" works just fine. Since I'd rather not start it manually every time I boot, is there a way to fix this? Also, httpd is the last daemon in my DAEMONS array.
/etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 127.0.0.1:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#php
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#PHP
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
/etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost laptop
::1 localhost.localdomain localhost
# End of file
Per the wiki, I also tried commenting out the line that reads
LoadModule unique_id_module modules/mod_unique_id.so
Either way, it still fails on boot.
Last edited by pythonscript (2012-06-10 21:14:44)

The SIGTERM are from reboots, yes. I'm not absolutely sure that the process isn't running; I just know that I can't access http://localhost immediately upon reboot. I have to restart the httpd daemon, which works fine. How would I be able to tell if it's just hung?
I checked everything.log, and I don't see anything that leaps off the page to me.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1930 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 2 threads of 1 processes of 1 users.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1931 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 3 threads of 1 processes of 1 users.
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: RegisterClient 106d33cade29b1ba713392593689729000000018320001
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689729000000018320001 to session
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): uid = 120
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): pid = 1842
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): App gnome-settings-daemon.desktop registered
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase INITIALIZATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=106d33cade29b1ba713392593689681600000018320000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: started pid:1936
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase RUNNING
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmPresence: adding idle watch
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost kernel: [ 29.003352] wlan0: no IPv6 routers present
Jun 9 17:29:31 localhost NetworkManager[765]: <warn> could not commit DNS changes: (0) Could not replace /etc/resolv.conf: Operation not permitted
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) successful, device activated.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Setting up new connection
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: New client '0x7f9ff0004e60 []'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Initializing client 0x7f9ff0004e60 []
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 []' received RegisterClient(106d33cade29b1ba713392593689681600000018320000)
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689681600000018320000 to session
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Set properties from client '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: ProcessID = '1936'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: sending IPv6 Router Solicitation
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: no IPv6 Routers available
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: sending IPv6 Router Solicitation
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: no IPv6 Routers available
Jun 9 17:29:33 localhost NetworkManager[765]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:40 localhost NetworkManager[765]: <info> (eth0): IP6 addrconf timed out or failed.
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> (wlan0): IP6 addrconf timed out or failed.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: handling signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Got callback for signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Logout called
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: requesting logout
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase RUNNING
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Caught signal 15, shutting down normally.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Done handling signals
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, 9, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: query end session complete
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, c, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: unable to find application for client - not restarting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428a40
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Using ConsoleKit for session tracking
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]')
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received CloseConnection
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x7f9ff0004e60
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000])
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428ac0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: last client disconnected - exiting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Unreffing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disposing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473070
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473150
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gdm-simple-slave[1728]: WARNING: Child process 1832 was already dead.
Jun 9 17:29:43 localhost gnome-session[1970]: EggSMClient-WARNING: Desktop file '/home/ak5791/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2022 of process 2022 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 4 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2023 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 5 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2024 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 6 threads of 2 processes of 2 users.
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Jun 9 17:29:44 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.colord-sane' (using servicehelper)
Jun 9 17:29:45 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Successfully made thread 2079 of process 2079 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Supervising 7 threads of 3 processes of 2 users.
Jun 9 17:29:46 localhost pulseaudio[2079]: [pulseaudio] pid.c: Daemon already running.
Jun 9 17:29:48 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jun 9 17:29:48 localhost udisksd[2110]: udisks daemon version 1.94.0 starting
Jun 9 17:29:48 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 9 17:29:48 localhost udisksd[2110]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 9 17:29:48 localhost kernel: [ 46.319778] gnome-shell-cal[2103] trap int3 ip:7ff3f55b85e1 sp:7fff94941890 error:0
Jun 9 17:30:19 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:40:53 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:47:15 localhost kernel: [ 1092.983585] usb 8-1.4.1: new high-speed USB device number 8 using ehci_hcd
Jun 9 22:47:15 localhost mtp-probe: checking bus 8, device 8: "/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4.1"
Jun 9 22:47:15 localhost mtp-probe: bus: 8, device: 8 was not an MTP device
Jun 9 22:47:15 localhost kernel: [ 1093.132002] usbcore: registered new interface driver uas
Jun 9 22:47:15 localhost kernel: [ 1093.135601] Initializing USB Mass Storage driver...
Jun 9 22:47:15 localhost kernel: [ 1093.135785] scsi6 : usb-storage 8-1.4.1:1.0
Jun 9 22:47:15 localhost kernel: [ 1093.135905] usbcore: registered new interface driver usb-storage
Jun 9 22:47:15 localhost kernel: [ 1093.135913] USB Mass Storage support registered.
Jun 9 22:47:16 localhost kernel: [ 1094.137579] scsi 6:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 2
Jun 9 22:47:16 localhost kernel: [ 1094.140133] sd 6:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB)
Jun 9 22:47:16 localhost kernel: [ 1094.140631] sd 6:0:0:0: [sdb] Write Protect is off
Jun 9 22:47:16 localhost kernel: [ 1094.140634] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Jun 9 22:47:16 localhost kernel: [ 1094.141128] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.141132] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.144916] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.144921] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.146680] sdb: sdb1
Jun 9 22:47:16 localhost kernel: [ 1094.151407] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.151411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.151414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Jun 9 22:47:17 localhost ntfs-3g[2636]: Version 2012.1.15 external FUSE 29
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mounted /dev/sdb1 (Read-Write, label "kingstonGB", NTFS 3.1)
Jun 9 22:47:17 localhost ntfs-3g[2636]: Cmdline options: rw,nodev,nosuid,uid=1000,gid=100,dmask=0077,fmask=0177,uhelper=udisks2
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mount options: rw,nodev,nosuid,uhelper=udisks2,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
Jun 9 22:47:17 localhost ntfs-3g[2636]: Global ownership and permissions enforced, configuration type 7
Jun 9 22:47:17 localhost udisksd[2110]: Mounted /dev/sdb1 at /run/media/ak5791/kingstonGB on behalf of uid 1000
Jun 9 22:47:28 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jun 9 22:47:28 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jun 9 22:47:46 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:57:59 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 23:01:02 localhost /USR/SBIN/CROND[5529]: (root) CMD (run-parts /etc/cron.hourly)
Jun 9 23:21:02 localhost -- MARK --
All I notice is that my system's time is having a few problems, since you'll notice that events occur at 22:00 and change, then 17:00 and change, then back to 22:00 and change afterwards. Could this be the problem? I've had the CMOS batteries peg out on me suddenly in the last few weeks. I would hope this sytem is not also suffering a similar fate. Nothing else was happening on my system except for the standard processes from /etc/rc.conf and other standard ones, since I've just been rebooting, checking the logs, then posting here.

[SOLVED] systemd : services failing to start on boot

I have removed sysvinit completely as per the systemd wiki pages.
I don't usually re-boot very often so I'm not sure exactly when the problem started.
I only noticed this problem about 4 or 5 days ago.
But now whenever I reboot my machine 2 services fail consistently.
adsl.service
colord.service
They both start flawlessly once I can log in at a console.
I'm using kde and in the last couple of days, while trying to fix my problem, the kdm service has failed to start a couple of times too - saying there is no X server.
Before switching to systemd I never had any of these problems using the old rc.conf method. My DAEMONS array had the adsl service start after the network service.
I need some help and advice to find out what is causing the problem and how to fix it.
Last edited by bhrgunatha (2012-10-25 05:44:22)

Thanks. That seems plausible. So I've been snooping at the journal.
journalctl -ab
Oct 25 17:06:13 starch systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Oct 25 17:06:14 starch systemd[1]: Started Recreate Volatile Files and Directories.
Oct 25 17:06:14 starch systemd[1]: Starting System Initialization.
Oct 25 17:06:14 starch systemd[1]: Reached target System Initialization.
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Listening on CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Starting Console System Startup Logging...
Oct 25 17:06:14 starch systemd[1]: Starting Restore Sound Card State...
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Started CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Starting D-Bus System Message Bus Socket.
Oct 25 17:06:16 starch ntpd[381]: ntpd [email protected] Tue Aug 21 15:06:24 UTC 2012 (1)
Oct 25 17:06:16 starch ntpd[413]: proto: precision = 0.156 usec
Oct 25 17:06:17 starch ntpd[413]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Oct 25 17:06:17 starch ntpd[413]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen and drop on 1 v6wildcard :: UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 2 lo 127.0.0.1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 3 lo ::1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: peers refreshed
Oct 25 17:06:18 starch ntpd[413]: Listening on routing socket on fd #20 for interface updates
Oct 25 17:06:18 starch dbus[384]: [system] Activating systemd to hand-off: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:06:18 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:03 starch dbus[384]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:03 starch systemd[1]: Starting Manage, Install and Generate Color Profiles...
Oct 25 17:07:03 starch systemd[1]: Started Manage, Install and Generate Color Profiles.
Oct 25 17:07:03 starch systemd[1]: colord.service: main process exited, code=killed, status=6
Oct 25 17:07:03 starch systemd[1]: Unit colord.service entered failed state.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 25 17:07:04 starch kernel: PPP generic driver version 2.4.2
Oct 25 17:07:04 starch cupsd[380]: Unknown directive DefaultAuthType on line 26.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link up
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 25 17:07:04 starch pppoe-start[382]: TIMED OUT
Oct 25 17:07:04 starch kernel: NET: Registered protocol family 24
Oct 25 17:07:04 starch pppoe-start[382]: /usr/sbin/pppoe-start: line 193: 394 Terminated $CONNECT "$@" > /dev/null 2>&1
That seems to confirm your theory.
eth0 link is not up when attempting to start colord and adsl
So the $64,000 question:
How do I defer them until eth0 is ready?
Or how can I force the eth0 link to be up before colord or adsl try to use it?
Last edited by bhrgunatha (2012-10-25 01:33:36)

[solved]Network fails to start sometimes

Hello!
I'm having a problem with my network. Sometimes it fails to start. Usually, a reboot solves this. Here is the error log:
[root@claudia log]# cat errors.log
Aug 6 03:16:28 claudia dhcpcd[3194]: dhcpStart: interface eth0 is not Ethernet or 802.2 Token Ring
rc.conf:
# NETWORKING
HOSTNAME="claudia"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
hosts:
[root@claudia log]# cat /etc/hosts
# /etc/hosts: static lookup table for host names
#<ip> <hostname> <hostname>
127.0.0.1 localhost.localdomain localhost claudia
# End of file
What should I do to solve this?
Thanks and regards,
Gustavo

I'd say it's because since the ethernet over firewire module is loaded too, it's counted as a network device too - and which one gets to be eth0 depends if the NIC or ethernet over firewire module is loaded first. There are many solutions to this:
1) If you don't need ethernet over firewire, keep it from being loaded by putting the module name (eth1394 I think) in MOD_BLACKLIST in /etc/rc.conf, like this:
MOD_BLACKLIST=(eth1394)
2) You can make both eth0 and eth1 (and perhaps other NICs too) start up together (I do this with my 2 NICs). To do that, make the rc.conf network section something like this:
lo="lo 127.0.0.1"
eth0="dhcp"
eth1="dhcp"
INTERFACES=(lo eth0 eth1)
Then you should put a @ in front of "network" ( @network ) in the DAEMONS array unless you like waiting for a NIC that won't start

[SOLVED] SSHD fails to start

Hi to everyone.
his is my 1st post and the second day I have bee playng with arch linux. I installed everythig up to gnome and everything worked just fine. Nevertheless I'm a newbie and I didn't manage to have sshd working. I followed the wiki but it simply fails to start (either at boottime or from commandline)
The error message is:
:: Starting Secure Shell Deamon [FAIL]
What can I do ?
Thanks in advance for any help
Paolo
Italy
Last edited by kayard (2007-09-30 16:27:50)

I'm not sure why but it works ... and Yes the reason why I was getting "FAILED" when trying to start sshd is because it was already working on port 22.
I didn't realized this earlier because I couldn't connect from another computer and I thought that was the reason while, in fact, was something else ...
(for the sake of knowledge during setup my ethernet card was eth1 and after setup the kernel set it up as eth0 but boot-time scripts didn't complain therefore the sistem booted flawlessy with a eth1 apparently working. Changing in rc.conf from eth1 to eth0 solved the problem)
By the way thanks for the guide and the nmap tip which will cam handy in the future.
Paolo

[PARTIALLY SOLVED] HAL fails to start

** UPDATE: PARTIALLY SOLVED - SEE BOTTOM OF THE FIRST POST
HAL fails to start. I'm not exactly sure why this is, but I believe it has something to do with my attempts to get automounting working under gnome.
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
[zen@intellitech ~]$ vim /etc/rc.conf
MODULES=(acpi-cpufreq cpufreq_ondemand e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore thinkpad_acpi uinput vboxdrv)
DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-1
hal-info 0.20080508-1
[zen@intellitech ~]$ /usr/sbin/hald --daemon=no --verbose=yes
03:13:37.451 [i] hald.c:669: hal 0.5.11
03:13:37.451 [i] hald.c:734: Will not daemonize
03:13:37.451 [i] hald_dbus.c:5381: local server is listening at unix:abstract=/var/run/hald/dbus-pdtZvbqaVq,guid=312b47921cba4c5cdbee099a48ec87d1
03:13:37.452 [E] ck-tracker.c:367: Error doing GetSeats on ConsoleKit: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
03:13:37.452 [E] ck-tracker.c:792: Could not get seats and sessions
03:13:37.452 [W] hald_dbus.c:5806: Could not initialize seats and sessions from ConsoleKit
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
03:13:37.453 [i] hald_runner.c:301: Runner has pid 3675
03:13:37.453 [i] hald_runner.c:182: runner connection is 0x15bdec0
03:13:37.456 [W] osspec.c:373: Unable to open /proc/mdstat: No such file or directory
03:13:37.457 [D] util_helper.c:124: drop_privileges: could not set group id
[zen@intellitech ~]$ vim /etc/group
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:root,zen
disk::6:root,zen
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,zen
ftp::11:
mail::12:
log::19:root
smmsp::25:
games::50:
network:x:90:zen
video:x:91:zen
audio::92:root,zen
optical::93:root,zen
floppy:x:94:root,zen
storage:x:95:root,zen
power:x:98:root,zen
nobody::99:
users::100:zen
locate:x:21:
uucp:x:14:
http:x:33:
scanner:x:96:
dbus:x:81:root,zen
hal:x:82:root,zen
avahi:x:84:root,zen
camera:x:97:
gdm:x:101:
vboxusers:x:108:zen
samba:x:109:zen,root
* Yes, I know it is bad practice to have a normal user listed under the disk group. It is necessary, however, in order to have raw disk access for virtual box.
[zen@intellitech ~]$ sudo /etc/rc.d/dbus stop
:: Stopping D-BUS system messagebus [DONE]
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting D-BUS system messagebus [DONE]
:: Starting Hardware Abstraction Layer [FAIL]
It's odd, because D-BUS will start but hal will not... Anybody have any suggestions?
* UPDATE (10/08/08): Did a full system upgrade and removed dbus from daemons array in rc.conf. UDEV EVENTS Processing speed seems to be back to normal.
** SOLUTION UPDATE: After removing custom ntfs-3g fdi policies from /etc/hal/fdi/policy/, hal seems to load without any problems. This seems to be a bug, since my policies were working at one point, and I believe a hal update caused the problem. I'll see if I can track down the exact hal version that it breaks on, and submit a respective bug report for it.
** OFF-TOPIC UPDATE: Using hwdetect --modules to get a modules list, and using these modules in rc.conf with MOD_AUTOLOAD turned off (and also in mkinitcpio.conf and running mkinitcpio -g <path>), seems to have dramatically increased my "Load udev events" processing time. After doing this, my udev speed went from almost 4000ms to literally < 500ms.
Last edited by intellitech (2008-10-08 14:58:53)

koch wrote:
intellitech wrote:DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
you have dbus starting before hal but hal starts debus by default so please try this...
DAEMONS=(...@acpid @hal @alsa...)
and delete debus from that line.
Removed dbus from the daemons array and hal still won't start. Also, I noticed that the "Loading udev events" portion of the boot process seems to take a lot longer than it used to. Last boot, it took about 19130ms, whereas it used to take < 3000ms. Could these be related?
Also, I ran a full system upgrade, both udev and hal were upgraded.
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-4
hal-info 0.20080508-1
[zen@intellitech ~]$ pacman -Q | grep udev
klibc-udev 128-1
udev 128-5

[SOLVED] X failed to start, then cannot login in tty

Recently I changed the X's monitor setting at /etc/X11/xorg.conf.d/10-monitor.conf. Seems that there is a wrong setting, and the X failed to start. So when booting, it says: INIT: Id 'x' respawning too fast: disabled for 5 minutes. So I changed to tty2 (alt-F2) and input my usual username and password, but checkpassword always says that my password is wrong.
So which username and password should I use? Or how to login to my computer?
The login manager is SLiM, DE is openbox + tint2, tty is fgetty (not agetty).
Last edited by chrlin (2012-02-10 02:00:06)

chrlin wrote:
But I'm still quite disappointed that the system offers no fallback from this kind of error. Any way to get around?
I guess the system should automatically goes to runlevel 3 (or other runlevel) in case runlevel 5 goes error or something. But it doesn't (Or I'm wrong?).
Well, in case you couldn't even as root, I had supposed you'd boot with your Arch live cd anyway, chroot properly into your system then, and edit /etc/inittab to runlevel 3. You'd probably be able to login afterwards and do startx from console, see what happens and check the log for errors.
When booting form cd you can cat it e.g. in /mnt/var/log/Xorg.0.log after mounting btw. -- Maybe there's an alternative way to edit the command line at boot as well, haven't looked for that yet. If there is, you might put that option into the bootloader's config of Arch's fallback kernel installation, so you could choose at startup.
At least to my knowledge once you configured your system to boot graphically (say, runlevel 5), there's no "fallback mode" into rl3. But what you can also do is to make your display manager able to alternatively get you into console (if possible; I know that's the case for cdm).
However, if you think your problem is now fixed, you should edit the header of your first post and add [SOLVED].

KeyAgent and the Mac HAL services failing to start at boot camp install

After installing windows 7 x64 with boot camp on my 2008 macbook pro, I went to install bootcamp with my leopard disc, and it wouldnt install properly. At the end KeyAgent and the Mac HALservices failed to start. Then when the computer restarted after install, the computer still acts like boot camp wasnt installed

After installing windows 7 x64 with boot camp on my 2008 macbook pro, I went to install bootcamp with my leopard disc, and it wouldnt install properly. At the end KeyAgent and the Mac HALservices failed to start. Then when the computer restarted after install, the computer still acts like boot camp wasnt installed

[SOLVED]Apache fails to start

I`ve had Apache,PHP and mysql running but few days ago i saw that httpd fails to start.
# apachectl configtest
httpd: Syntax error on line 54 of /etc/httpd/conf/httpd.conf: Cannot load /home/svejaka/Server/modules/mod_authn_file.so into server: /home/svejaka/Server/modules/mod_authn_file.so: cannot open shared object file: No such file or directory
Last edited by svejaka (2009-10-14 17:51:45)

I get the same error but my ServerRoot is ok. (/etc/httpd/)
So I really have no clue aboout what to do.
this is my .conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so 'log/access_log'
# with ServerRoot set to '/www' will be interpreted by the
# server as '/www/log/access_log', where as '/log/access_log' will be
# interpreted as '/log/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks Includes
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#PHP
Include conf/extra/php5_module.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
#Adminers for sql
Include conf/extra/httpd-adminer.conf

[SOLVED]apache failes to start

Hi folks,
As of a few moments ago my server failes to start apache
systemctl status httpd gives me following error
sudo systemctl status httpd
* httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since Mon 2014-03-31 15:08:45 CEST; 24s ago
Process: 3639 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Mar 31 15:08:45 odp apachectl[3639]: [Mon Mar 31 15:08:45.031005 2014] [so:warn] [pid 3641] AH01574: module suexec_module is already loaded, skipping
Mar 31 15:08:45 odp apachectl[3639]: AH00534: httpd: Configuration error: No MPM loaded.
Mar 31 15:08:45 odp systemd[1]: httpd.service: control process exited, code=exited status=1
Mar 31 15:08:45 odp systemd[1]: Failed to start Apache Web Server.
Mar 31 15:08:45 odp systemd[1]: Unit httpd.service entered failed state.
I am not really sure what to make out of this error
Last edited by odp (2014-03-31 14:55:13)

I realize it has to do with the httpd.conf structure has changed thus there is a generated httpd.conf.pacnew file using this works fine. So forget about the old question. The new question is, how can I merge the two files?

[solved] wireless doesn't start at boot

I have BCM94311MCG wlan mini-PCI (rev 01) which works with b43 + wpa_supplicant nicely, except I can't seem to get to automagically start at boot time.
wlan0 always times out (wired connects at boot time just fine). I'd like my laptop to automatically connect to one of two networks, else remain disconnected.
Once started I can always netcfg2 <network name> and it connects no problem... I must have missed something in the wireless setup but I can't find what it is.
my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="yes"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MOD_BLACKLIST=(!pcspkr !bcm43xx !ndiswrapper ) #deprecated
MOD_LOADLIST=(acpi-cpufreq cpufreq_ondemand slhc i8k tg3 fuse b43 ppdev snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
MODULES=( ${MOD_BLACKLIST[@]} ${MOD_LOADLIST[@]} )
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
HOSTNAME="myhostname"
# Interfaces to start at boot-up (in this order)
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(eth0 wlan0)
# Routes to start at boot-up (in this order)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
NETWORKS=("auto-wireless wlan0")
# DAEMONS
DAEMONS=(syslog-ng iptables @network @fusesmb @cups !netfs !crond @alsa @hal @dbus @fam @acpid @laptop-mode @cpufreq)
afaik the only unique thing I have in rc.conf is my fusesmb daemon (a script that mounts samba shares)
and my network.d/<network name>
CONNECTION="wireless"
INTERFACE=wlan0
SCAN="yes"
SECURITY="wpa-config"
ESSID="BCSI"
IP="dhcp"
TIMEOUT=20
when I look for wpa_supplicant after a boot, it is not running ( ps aux | grep wpa ).
wlan0 is up right after boot:
$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:15:C5:08:1E:1C
inet addr:10.1.1.148 Bcast:10.1.1.255 Mask:255.255.255.0
inet6 addr: fe80::215:c5ff:fe08:1e1c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14443 errors:0 dropped:0 overruns:0 frame:0
TX packets:13281 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8031647 (7.6 Mb) TX bytes:2248854 (2.1 Mb)
Interrupt:19
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1221 errors:0 dropped:0 overruns:0 frame:0
TX packets:1221 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:75880 (74.1 Kb) TX bytes:75880 (74.1 Kb)
wlan0 Link encap:Ethernet HWaddr 00:16:CE:67:85:B5
inet addr:169.254.55.57 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-16-CE-67-85-B5-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
but since wpa_supplicant isn't running, it won't associate.
I'm misunderstading (I think) how netcfg2 is used during startup, I thought the line `NETWORKS=("auto-wireless wlan0")` would tell netcfg2 to try /etc/network.d/*
thanks for looking
Last edited by bioe007 (2008-04-30 14:19:12)

From: http://wiki.archlinux.org/index.php/Network_Profiles
"Ensure that net-profiles is in your rc.conf DAEMONS=() line."

[Solved] Too much applications start at boot up !

Hello !
I apologize in advance for my poor English ...
So I used to run GNOME as my Desktop Environment, and I set some applications to start at boot up, such as Tilda, Cairo-dock, conky ...
Now, I'm using OpenBox, and some applications start, even if they're not in my autostart.sh !
So, here is my autostart.sh
# Run the system-wide support stuff
. $GLOBALAUTOSTART
# Programs to launch at startup
xcompmgr -t-5 -l-5 -r4.2 -o.55 &
# Programs that will run after Openbox has started
(sleep 2 && conky) &
So in this case, xcompmgr and conky starts, but cairo-dock and conky too, even if they're not here my autostart.
How can I control these applications ?
This problem is like a window$ problem, so I must do something !
Thanks a lot !
PS: I have some kde4 packages installed (because they were needed for some dependencies problems ...)
Last edited by Tib05 (2008-09-27 21:58:03)

Oh sorry, I forgotted to post my .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
# exec startkde
# exec startxfce4
# exec icewm
# exec blackbox
# exec fluxbox
exec openbox-session
The only entry I have, in the openbox one ...

[Solved]xorg fails to start, integrated nvidia gpu with intel

Arch 32 Bit system
When i start X server it says server terminated succesfully.
the output of "lspci | grep VGA"
00:02:0 VGA Compatible Controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00:0 VGA Compatible Controller: NVIDIA Corporation GF108M [GrForce GT 540M] (rev a1)
I installed xf86-video-modesettings xf86-video-fbdev nvidia nvidia-libgl nvidia-utils xorg-server xorg-server-utils xorg-xinit xterm xorg-twm xorg-xclock
I guess the problem is monitor cant be detected but i dont know how can i make nvidia to find it. Look at Monitor section at 10-nvidia.conf and also Xorg.0.log.
xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 337.12 (buildmeister@swio-display-x64-rhel04-18) Fri Apr 4 15:15:13 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
xorg.conf.d/10-nvidia.conf
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:1:0:0"
EndSection
xorg.conf.d/10-evdev.conf
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
xorg.conf.d/10-quirks.conf
# Collection of quirks and blacklist/whitelists for specific devices.
# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442
Section "InputClass"
Identifier "ThinkPad HDAPS accelerometer blacklist"
MatchProduct "ThinkPad HDAPS accelerometer data"
Option "Ignore" "on"
EndSection
xorg.conf.d/50-synaptics.conf
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
# To disable the bottom edge area so the buttons only work as buttons,
# not for movement, set the AreaBottomEdge
# Option "AreaBottomEdge" "82%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
And finally
/var/log/Xorg.0.log
[ 37.622]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 37.622] X Protocol Version 11, Revision 0
[ 37.622] Build Operating System: Linux 3.14.0-4-ARCH i686
[ 37.622] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
[ 37.622] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
[ 37.623] Build Date: 14 April 2014 08:41:02AM
[ 37.623]
[ 37.623] Current version of pixman: 0.32.4
[ 37.623] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 37.623] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 37.624] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 14:31:33 2014
[ 37.644] (==) Using config file: "/etc/X11/xorg.conf"
[ 37.644] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 37.680] (==) ServerLayout "Layout0"
[ 37.680] (**) |-->Screen "Screen0" (0)
[ 37.680] (**) | |-->Monitor "Monitor0"
[ 37.680] (**) | |-->Device "Device0"
[ 37.680] (**) |-->Input Device "Keyboard0"
[ 37.681] (**) |-->Input Device "Mouse0"
[ 37.681] (==) Automatically adding devices
[ 37.681] (==) Automatically enabling devices
[ 37.681] (==) Automatically adding GPU devices
[ 37.725] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 37.725] Entry deleted from font path.
[ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 37.726] Entry deleted from font path.
[ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 37.726] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 37.726] Entry deleted from font path.
[ 37.726] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 37.726] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 37.726] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 37.726] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 37.726] (WW) Disabling Keyboard0
[ 37.726] (WW) Disabling Mouse0
[ 37.727] (II) Loader magic: 0x8264660
[ 37.727] (II) Module ABI versions:
[ 37.727] X.Org ANSI C Emulation: 0.4
[ 37.727] X.Org Video Driver: 15.0
[ 37.727] X.Org XInput driver : 20.0
[ 37.727] X.Org Server Extension : 8.0
[ 37.727] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 37.728] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 37.731] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 37.731] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 37.732] (II) Open ACPI successful (/var/run/acpid.socket)
[ 37.732] Initializing built-in extension Generic Event Extension
[ 37.732] Initializing built-in extension SHAPE
[ 37.732] Initializing built-in extension MIT-SHM
[ 37.732] Initializing built-in extension XInputExtension
[ 37.733] Initializing built-in extension XTEST
[ 37.733] Initializing built-in extension BIG-REQUESTS
[ 37.733] Initializing built-in extension SYNC
[ 37.733] Initializing built-in extension XKEYBOARD
[ 37.733] Initializing built-in extension XC-MISC
[ 37.733] Initializing built-in extension SECURITY
[ 37.733] Initializing built-in extension XINERAMA
[ 37.733] Initializing built-in extension XFIXES
[ 37.733] Initializing built-in extension RENDER
[ 37.733] Initializing built-in extension RANDR
[ 37.734] Initializing built-in extension COMPOSITE
[ 37.734] Initializing built-in extension DAMAGE
[ 37.734] Initializing built-in extension MIT-SCREEN-SAVER
[ 37.734] Initializing built-in extension DOUBLE-BUFFER
[ 37.734] Initializing built-in extension RECORD
[ 37.734] Initializing built-in extension DPMS
[ 37.734] Initializing built-in extension Present
[ 37.736] Initializing built-in extension DRI3
[ 37.739] Initializing built-in extension X-Resource
[ 37.741] Initializing built-in extension XVideo
[ 37.743] Initializing built-in extension XVideo-MotionCompensation
[ 37.745] Initializing built-in extension XFree86-VidModeExtension
[ 37.747] Initializing built-in extension XFree86-DGA
[ 37.748] Initializing built-in extension XFree86-DRI
[ 37.750] Initializing built-in extension DRI2
[ 37.750] (II) LoadModule: "glx"
[ 37.765] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 38.573] (II) Module glx: vendor="NVIDIA Corporation"
[ 38.573] compiled for 4.0.2, module version = 1.0.0
[ 38.573] Module class: X.Org Server Extension
[ 38.573] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
[ 38.575] Loading extension GLX
[ 38.575] (II) LoadModule: "nvidia"
[ 38.575] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 38.641] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 38.641] compiled for 4.0.2, module version = 1.0.0
[ 38.641] Module class: X.Org Video Driver
[ 38.652] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
[ 38.653] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 38.654] (++) using VT number 2
[ 38.655] (II) Loading sub module "fb"
[ 38.655] (II) LoadModule: "fb"
[ 38.656] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 38.668] (II) Module fb: vendor="X.Org Foundation"
[ 38.668] compiled for 1.15.1, module version = 1.0.0
[ 38.668] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.668] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 38.668] (II) Loading sub module "wfb"
[ 38.668] (II) LoadModule: "wfb"
[ 38.669] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 38.671] (II) Module wfb: vendor="X.Org Foundation"
[ 38.671] compiled for 1.15.1, module version = 1.0.0
[ 38.671] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.671] (II) Loading sub module "ramdac"
[ 38.671] (II) LoadModule: "ramdac"
[ 38.671] (II) Module "ramdac" already built-in
[ 38.675] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 38.675] (==) NVIDIA(0): RGB weight 888
[ 38.675] (==) NVIDIA(0): Default visual is TrueColor
[ 38.675] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 38.676] (**) NVIDIA(0): Enabling 2D acceleration
[ 45.267] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 45.268] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 45.270] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 45.270] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 45.270] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
[ 45.270] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 45.275] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 45.275] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 45.275] (--) NVIDIA(0): DFP-0
[ 45.275] (--) NVIDIA(0): DFP-1
[ 45.275] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 45.275] (--) NVIDIA(0): DFP-0: Internal LVDS
[ 45.275] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 45.275] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 45.275] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 45.275] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 45.275] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 45.275] (**) NVIDIA(0): all display devices.)
[ 45.276] (==) NVIDIA(0):
[ 45.276] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 45.276] (==) NVIDIA(0): will be used as the requested mode.
[ 45.276] (==) NVIDIA(0):
[ 45.277] (II) NVIDIA(0): Validated MetaModes:
[ 45.277] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 45.277] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 45.281] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 45.281] (WW) NVIDIA(0): from CRT-0's EDID.
[ 45.281] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 45.281] (--) Depth 24 pixmap format is 32 bpp
[ 45.281] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 45.281] (II) NVIDIA: access.
[ 45.499] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 45.544] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 45.544] Loading extension NV-GLX
[ 45.648] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 45.649] (==) NVIDIA(0): Backing store enabled
[ 45.649] (==) NVIDIA(0): Silken mouse enabled
[ 45.651] (**) NVIDIA(0): DPMS enabled
[ 45.651] Loading extension NV-CONTROL
[ 45.651] Loading extension XINERAMA
[ 45.651] (II) Loading sub module "dri2"
[ 45.651] (II) LoadModule: "dri2"
[ 45.651] (II) Module "dri2" already built-in
[ 45.651] (II) NVIDIA(0): [DRI2] Setup complete
[ 45.652] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 45.652] (--) RandR disabled
[ 45.673] (II) Initializing extension GLX
[ 45.973] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 45.973] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45.973] (II) LoadModule: "evdev"
[ 45.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 46.007] (II) Module evdev: vendor="X.Org Foundation"
[ 46.007] compiled for 1.15.0, module version = 2.8.2
[ 46.007] Module class: X.Org XInput Driver
[ 46.007] ABI class: X.Org XInput driver, version 20.0
[ 46.007] (II) Using input driver 'evdev' for 'Power Button'
[ 46.007] (**) Power Button: always reports core events
[ 46.007] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 46.007] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.007] (--) evdev: Power Button: Found keys
[ 46.007] (II) evdev: Power Button: Configuring as keyboard
[ 46.007] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 46.007] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 46.007] (**) Option "xkb_rules" "evdev"
[ 46.007] (**) Option "xkb_model" "pc104"
[ 46.007] (**) Option "xkb_layout" "us"
[ 46.062] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 46.063] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.063] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.063] (**) Video Bus: always reports core events
[ 46.063] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 46.063] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.063] (--) evdev: Video Bus: Found keys
[ 46.063] (II) evdev: Video Bus: Configuring as keyboard
[ 46.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 46.063] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 46.063] (**) Option "xkb_rules" "evdev"
[ 46.063] (**) Option "xkb_model" "pc104"
[ 46.063] (**) Option "xkb_layout" "us"
[ 46.064] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 46.064] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 46.064] (II) Using input driver 'evdev' for 'Power Button'
[ 46.064] (**) Power Button: always reports core events
[ 46.064] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 46.064] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 46.064] (--) evdev: Power Button: Found keys
[ 46.064] (II) evdev: Power Button: Configuring as keyboard
[ 46.064] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
[ 46.064] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 46.064] (**) Option "xkb_rules" "evdev"
[ 46.064] (**) Option "xkb_model" "pc104"
[ 46.064] (**) Option "xkb_layout" "us"
[ 46.066] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 46.066] (II) No input driver specified, ignoring this device.
[ 46.066] (II) This device may have been added with another device file.
[ 46.066] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 46.066] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 46.066] (II) Using input driver 'evdev' for 'Sleep Button'
[ 46.066] (**) Sleep Button: always reports core events
[ 46.066] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 46.066] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 46.066] (--) evdev: Sleep Button: Found keys
[ 46.066] (II) evdev: Sleep Button: Configuring as keyboard
[ 46.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
[ 46.067] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 46.067] (**) Option "xkb_rules" "evdev"
[ 46.067] (**) Option "xkb_model" "pc104"
[ 46.067] (**) Option "xkb_layout" "us"
[ 46.068] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 46.068] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 46.068] (II) Using input driver 'evdev' for 'Video Bus'
[ 46.068] (**) Video Bus: always reports core events
[ 46.068] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 46.068] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 46.068] (--) evdev: Video Bus: Found keys
[ 46.068] (II) evdev: Video Bus: Configuring as keyboard
[ 46.068] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
[ 46.068] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 46.068] (**) Option "xkb_rules" "evdev"
[ 46.068] (**) Option "xkb_model" "pc104"
[ 46.068] (**) Option "xkb_layout" "us"
[ 46.069] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 46.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 46.070] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event6)
[ 46.070] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 46.070] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 46.070] (**) 1.3M HD WebCam: always reports core events
[ 46.070] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event6"
[ 46.070] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
[ 46.070] (--) evdev: 1.3M HD WebCam: Found keys
[ 46.070] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 46.070] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event6"
[ 46.070] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 46.070] (**) Option "xkb_rules" "evdev"
[ 46.070] (**) Option "xkb_model" "pc104"
[ 46.070] (**) Option "xkb_layout" "us"
[ 46.071] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 46.071] (II) No input driver specified, ignoring this device.
[ 46.071] (II) This device may have been added with another device file.
[ 46.072] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 46.072] (II) No input driver specified, ignoring this device.
[ 46.072] (II) This device may have been added with another device file.
[ 46.072] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 46.072] (II) No input driver specified, ignoring this device.
[ 46.072] (II) This device may have been added with another device file.
[ 46.073] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 46.073] (II) No input driver specified, ignoring this device.
[ 46.073] (II) This device may have been added with another device file.
[ 46.073] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 46.073] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 46.073] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 46.074] (**) AT Translated Set 2 keyboard: always reports core events
[ 46.074] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 46.074] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 46.074] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 46.074] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 46.074] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 46.074] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 46.074] (**) Option "xkb_rules" "evdev"
[ 46.074] (**) Option "xkb_model" "pc104"
[ 46.074] (**) Option "xkb_layout" "us"
[ 46.075] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 46.075] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 46.075] (II) LoadModule: "synaptics"
[ 46.075] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 46.092] (II) Module synaptics: vendor="X.Org Foundation"
[ 46.092] compiled for 1.15.0, module version = 1.7.4
[ 46.092] Module class: X.Org XInput Driver
[ 46.092] ABI class: X.Org XInput driver, version 20.0
[ 46.092] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 46.092] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.092] (**) Option "Device" "/dev/input/event15"
[ 46.250] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 46.250] (**) Option "TapButton1" "1"
[ 46.250] (**) Option "TapButton2" "2"
[ 46.250] (**) Option "TapButton3" "3"
[ 46.250] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.250] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.316] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event15"
[ 46.316] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 46.317] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 46.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 46.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.318] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 46.318] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 46.319] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 46.319] (II) No input driver specified, ignoring this device.
[ 46.319] (II) This device may have been added with another device file.
[ 46.319] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event8)
[ 46.319] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 46.320] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 46.320] (**) Acer WMI hotkeys: always reports core events
[ 46.320] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event8"
[ 46.320] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 46.320] (--) evdev: Acer WMI hotkeys: Found keys
[ 46.320] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 46.320] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[ 46.320] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 46.320] (**) Option "xkb_rules" "evdev"
[ 46.320] (**) Option "xkb_model" "pc104"
[ 46.320] (**) Option "xkb_layout" "us"
[ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event9)
[ 46.321] (II) No input driver specified, ignoring this device.
[ 46.321] (II) This device may have been added with another device file.
[ 46.321] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 46.321] (II) No input driver specified, ignoring this device.
[ 46.321] (II) This device may have been added with another device file.
[ 57.547] (II) evdev: Acer WMI hotkeys: Close
[ 57.547] (II) UnloadModule: "evdev"
[ 57.547] (II) UnloadModule: "synaptics"
[ 57.547] (II) evdev: AT Translated Set 2 keyboard: Close
[ 57.547] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: 1.3M HD WebCam: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Video Bus: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Sleep Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Power Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Video Bus: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.548] (II) evdev: Power Button: Close
[ 57.548] (II) UnloadModule: "evdev"
[ 57.580] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 57.589] (EE) Server terminated successfully (0). Closing log file.
Last edited by hozturk0327 (2014-04-28 14:32:36)

I realized that instead of this
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto
i used
xrandr --setprovideroutputsource NVIDIA-0
xrandr --auto
Now it is fixed.
And sorry Kartious i thought i uploaded ~/.xinitrc.
EDIT:
uname -a outputs
Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08: CEST 2014 i686 GNU/Linux
Also this is the new Xorg.0.log
[ 17.166]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17.166] X Protocol Version 11, Revision 0
[ 17.166] Build Operating System: Linux 3.14.0-4-ARCH i686
[ 17.167] Current Operating System: Linux Ceset-PC 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 21:01:08 CEST 2014 i686
[ 17.167] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c4bc1b1f-6e34-413e-bd2a-202d403c593d rw quiet
[ 17.167] Build Date: 14 April 2014 08:41:02AM
[ 17.167]
[ 17.167] Current version of pixman: 0.32.4
[ 17.167] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW.) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.168] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 28 16:45:17 2014
[ 17.210] (==) Using config file: "/etc/X11/xorg.conf"
[ 17.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.246] (==) ServerLayout "layout"
[ 17.246] (**) |-->Screen "nvidia" (0)
[ 17.246] (**) | |-->Monitor "<default monitor>"
[ 17.247] (**) | |-->Device "nvidia"
[ 17.247] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 17.247] (**) |-->Inactive Device "intel"
[ 17.247] (==) Automatically adding devices
[ 17.247] (==) Automatically enabling devices
[ 17.247] (==) Automatically adding GPU devices
[ 17.290] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17.291] Entry deleted from font path.
[ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17.292] Entry deleted from font path.
[ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17.292] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17.292] Entry deleted from font path.
[ 17.292] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17.292] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17.292] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17.292] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17.293] (II) Loader magic: 0x8264660
[ 17.293] (II) Module ABI versions:
[ 17.293] X.Org ANSI C Emulation: 0.4
[ 17.293] X.Org Video Driver: 15.0
[ 17.293] X.Org XInput driver : 20.0
[ 17.293] X.Org Server Extension : 8.0
[ 17.293] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 17.294] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17.297] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
[ 17.297] (--) PCI: (0:1:0:0) 10de:0df4:1025:0512 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 17.297] (II) Open ACPI successful (/var/run/acpid.socket)
[ 17.298] Initializing built-in extension Generic Event Extension
[ 17.298] Initializing built-in extension SHAPE
[ 17.298] Initializing built-in extension MIT-SHM
[ 17.298] Initializing built-in extension XInputExtension
[ 17.299] Initializing built-in extension XTEST
[ 17.299] Initializing built-in extension BIG-REQUESTS
[ 17.299] Initializing built-in extension SYNC
[ 17.299] Initializing built-in extension XKEYBOARD
[ 17.299] Initializing built-in extension XC-MISC
[ 17.299] Initializing built-in extension SECURITY
[ 17.299] Initializing built-in extension XINERAMA
[ 17.299] Initializing built-in extension XFIXES
[ 17.299] Initializing built-in extension RENDER
[ 17.299] Initializing built-in extension RANDR
[ 17.300] Initializing built-in extension COMPOSITE
[ 17.300] Initializing built-in extension DAMAGE
[ 17.300] Initializing built-in extension MIT-SCREEN-SAVER
[ 17.300] Initializing built-in extension DOUBLE-BUFFER
[ 17.300] Initializing built-in extension RECORD
[ 17.300] Initializing built-in extension DPMS
[ 17.300] Initializing built-in extension Present
[ 17.302] Initializing built-in extension DRI3
[ 17.305] Initializing built-in extension X-Resource
[ 17.307] Initializing built-in extension XVideo
[ 17.309] Initializing built-in extension XVideo-MotionCompensation
[ 17.311] Initializing built-in extension XFree86-VidModeExtension
[ 17.313] Initializing built-in extension XFree86-DGA
[ 17.314] Initializing built-in extension XFree86-DRI
[ 17.316] Initializing built-in extension DRI2
[ 17.316] (II) LoadModule: "glx"
[ 17.331] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.139] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.139] compiled for 4.0.2, module version = 1.0.0
[ 18.139] Module class: X.Org Server Extension
[ 18.139] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:32:00 PDT 2014
[ 18.141] Loading extension GLX
[ 18.141] (II) LoadModule: "nvidia"
[ 18.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.207] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.207] compiled for 4.0.2, module version = 1.0.0
[ 18.207] Module class: X.Org Video Driver
[ 18.217] (II) LoadModule: "modesetting"
[ 18.217] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.223] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.223] compiled for 1.15.0, module version = 0.8.1
[ 18.223] Module class: X.Org Video Driver
[ 18.223] ABI class: X.Org Video Driver, version 15.0
[ 18.224] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:10:20 PDT 2014
[ 18.224] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.225] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.225] (++) using VT number 1
[ 18.227] (II) Loading sub module "fb"
[ 18.227] (II) LoadModule: "fb"
[ 18.227] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.234] (II) Module fb: vendor="X.Org Foundation"
[ 18.234] compiled for 1.15.1, module version = 1.0.0
[ 18.234] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.234] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 18.234] (II) Loading sub module "wfb"
[ 18.234] (II) LoadModule: "wfb"
[ 18.235] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.237] (II) Module wfb: vendor="X.Org Foundation"
[ 18.237] compiled for 1.15.1, module version = 1.0.0
[ 18.237] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.237] (II) Loading sub module "ramdac"
[ 18.237] (II) LoadModule: "ramdac"
[ 18.237] (II) Module "ramdac" already built-in
[ 18.240] (II) modesetting(1): using drv /dev/dri/card0
[ 18.240] (II) modesetting(G0): using drv /dev/dri/card0
[ 18.240] (EE) Screen 1 deleted because of no matching config section.
[ 18.240] (II) UnloadModule: "modesetting"
[ 18.240] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 18.240] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.240] (==) NVIDIA(0): RGB weight 888
[ 18.240] (==) NVIDIA(0): Default visual is TrueColor
[ 18.240] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.241] (**) NVIDIA(0): Enabling 2D acceleration
[ 24.989] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[ 24.989] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 24.992] (II) NVIDIA(0): NVIDIA GPU GeForce GT 540M (GF108) at PCI:1:0:0 (GPU-0)
[ 24.992] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 24.992] (--) NVIDIA(0): VideoBIOS: 70.08.3c.00.19
[ 24.992] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 24.997] (--) NVIDIA(0): Valid display device(s) on GeForce GT 540M at PCI:1:0:0
[ 24.997] (--) NVIDIA(0): CRT-0 (boot, connected)
[ 24.997] (--) NVIDIA(0): DFP-0
[ 24.997] (--) NVIDIA(0): DFP-1
[ 24.997] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 24.997] (--) NVIDIA(0): DFP-0: Internal LVDS
[ 24.997] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 24.997] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 24.997] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 24.997] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 24.997] (**) NVIDIA(0): device CRT-0 (Using EDID frequencies has been enabled on
[ 24.997] (**) NVIDIA(0): all display devices.)
[ 25.000] (==) NVIDIA(0):
[ 25.000] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 25.000] (==) NVIDIA(0): will be used as the requested mode.
[ 25.000] (==) NVIDIA(0):
[ 25.001] (II) NVIDIA(0): Validated MetaModes:
[ 25.001] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 25.001] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[ 25.006] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[ 25.006] (WW) NVIDIA(0): from CRT-0's EDID.
[ 25.006] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 25.006] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[ 25.006] (==) modesetting(G0): RGB weight 888
[ 25.006] (==) modesetting(G0): Default visual is TrueColor
[ 25.006] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[ 25.006] (II) modesetting(G0): Output LVDS-1-0 has no monitor section
[ 25.008] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[ 25.009] (II) modesetting(G0): EDID for output LVDS-1-0
[ 25.009] (II) modesetting(G0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 25.009] (II) modesetting(G0): Year: 2009 Week: 1
[ 25.009] (II) modesetting(G0): EDID Version: 1.3
[ 25.009] (II) modesetting(G0): Digital Display Input
[ 25.009] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 25.009] (II) modesetting(G0): Gamma: 2.20
[ 25.009] (II) modesetting(G0): No DPMS capabilities specified
[ 25.009] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.009] (II) modesetting(G0): First detailed timing is preferred mode
[ 25.009] (II) modesetting(G0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 25.009] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 25.009] (II) modesetting(G0): Manufacturer's mask: 0
[ 25.009] (II) modesetting(G0): Supported detailed timing:
[ 25.009] (II) modesetting(G0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 25.009] (II) modesetting(G0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0
[ 25.009] (II) modesetting(G0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 25.009] (II) modesetting(G0): Unknown vendor-specific block f
[ 25.009] (II) modesetting(G0): AUO
[ 25.009] (II) modesetting(G0): B156XW02 V2
[ 25.009] (II) modesetting(G0): EDID (in hex):
[ 25.009] (II) modesetting(G0): 00ffffffffffff0006afec2200000000
[ 25.009] (II) modesetting(G0): 01130103802213780ac8959e57549226
[ 25.009] (II) modesetting(G0): 0f505400000001010101010101010101
[ 25.009] (II) modesetting(G0): 010101010101121b5642500026302018
[ 25.009] (II) modesetting(G0): 340058c1100000180000000f00000000
[ 25.009] (II) modesetting(G0): 00000000000000000020000000fe0041
[ 25.009] (II) modesetting(G0): 554f0a202020202020202020000000fe
[ 25.009] (II) modesetting(G0): 004231353658573032205632200a00c0
[ 25.009] (II) modesetting(G0): Printing probed modes for output LVDS-1-0
[ 25.009] (II) modesetting(G0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP)
[ 25.009] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 25.009] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 25.010] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 25.011] (II) modesetting(G0): EDID for output VGA-1-0
[ 25.011] (II) modesetting(G0): EDID for output HDMI-1-0
[ 25.011] (II) modesetting(G0): EDID for output DisplayPort-1-0
[ 25.011] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.011] (==) modesetting(G0): DPI set to (96, 96)
[ 25.011] (II) Loading sub module "fb"
[ 25.012] (II) LoadModule: "fb"
[ 25.012] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.012] (II) Module fb: vendor="X.Org Foundation"
[ 25.012] compiled for 1.15.1, module version = 1.0.0
[ 25.012] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.012] (II) Loading sub module "shadow"
[ 25.012] (II) LoadModule: "shadow"
[ 25.012] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 25.022] (II) Module shadow: vendor="X.Org Foundation"
[ 25.022] compiled for 1.15.1, module version = 1.1.0
[ 25.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.023] (--) Depth 24 pixmap format is 32 bpp
[ 25.033] (==) modesetting(G0): Backing store enabled
[ 25.033] (==) modesetting(G0): Silken mouse enabled
[ 25.033] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 25.034] (==) modesetting(G0): DPMS enabled
[ 25.334] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 25.334] (II) NVIDIA: access.
[ 25.553] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 25.627] Loading extension NV-GLX
[ 25.723] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 25.723] (==) NVIDIA(0): Backing store enabled
[ 25.723] (==) NVIDIA(0): Silken mouse enabled
[ 25.724] (==) NVIDIA(0): DPMS enabled
[ 25.724] Loading extension NV-CONTROL
[ 25.724] Loading extension XINERAMA
[ 25.724] (II) Loading sub module "dri2"
[ 25.724] (II) LoadModule: "dri2"
[ 25.724] (II) Module "dri2" already built-in
[ 25.724] (II) NVIDIA(0): [DRI2] Setup complete
[ 25.724] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 25.725] (--) RandR disabled
[ 25.756] (II) Initializing extension GLX
[ 25.760] (II) modesetting(G0): Damage tracking initialized
[ 26.052] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 26.052] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.052] (II) LoadModule: "evdev"
[ 26.078] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.081] (II) Module evdev: vendor="X.Org Foundation"
[ 26.081] compiled for 1.15.0, module version = 2.8.2
[ 26.081] Module class: X.Org XInput Driver
[ 26.081] ABI class: X.Org XInput driver, version 20.0
[ 26.081] (II) Using input driver 'evdev' for 'Power Button'
[ 26.081] (**) Power Button: always reports core events
[ 26.081] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 26.081] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.081] (--) evdev: Power Button: Found keys
[ 26.081] (II) evdev: Power Button: Configuring as keyboard
[ 26.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 26.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 26.081] (**) Option "xkb_rules" "evdev"
[ 26.081] (**) Option "xkb_model" "pc104"
[ 26.081] (**) Option "xkb_layout" "us"
[ 26.136] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 26.136] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.136] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.136] (**) Video Bus: always reports core events
[ 26.136] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 26.136] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.136] (--) evdev: Video Bus: Found keys
[ 26.136] (II) evdev: Video Bus: Configuring as keyboard
[ 26.136] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 26.136] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 26.136] (**) Option "xkb_rules" "evdev"
[ 26.136] (**) Option "xkb_model" "pc104"
[ 26.136] (**) Option "xkb_layout" "us"
[ 26.137] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 26.137] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.137] (II) Using input driver 'evdev' for 'Power Button'
[ 26.137] (**) Power Button: always reports core events
[ 26.137] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 26.138] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 26.138] (--) evdev: Power Button: Found keys
[ 26.138] (II) evdev: Power Button: Configuring as keyboard
[ 26.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event1"
[ 26.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 26.138] (**) Option "xkb_rules" "evdev"
[ 26.138] (**) Option "xkb_model" "pc104"
[ 26.138] (**) Option "xkb_layout" "us"
[ 26.139] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 26.139] (II) No input driver specified, ignoring this device.
[ 26.139] (II) This device may have been added with another device file.
[ 26.139] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 26.139] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 26.139] (II) Using input driver 'evdev' for 'Sleep Button'
[ 26.140] (**) Sleep Button: always reports core events
[ 26.140] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 26.140] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 26.140] (--) evdev: Sleep Button: Found keys
[ 26.140] (II) evdev: Sleep Button: Configuring as keyboard
[ 26.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event3"
[ 26.140] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 26.140] (**) Option "xkb_rules" "evdev"
[ 26.140] (**) Option "xkb_model" "pc104"
[ 26.140] (**) Option "xkb_layout" "us"
[ 26.141] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 26.141] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.141] (II) Using input driver 'evdev' for 'Video Bus'
[ 26.141] (**) Video Bus: always reports core events
[ 26.141] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 26.141] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 26.141] (--) evdev: Video Bus: Found keys
[ 26.141] (II) evdev: Video Bus: Configuring as keyboard
[ 26.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input16/event14"
[ 26.141] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 26.141] (**) Option "xkb_rules" "evdev"
[ 26.141] (**) Option "xkb_model" "pc104"
[ 26.141] (**) Option "xkb_layout" "us"
[ 26.142] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 26.142] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 26.143] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event8)
[ 26.143] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 26.143] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 26.143] (**) 1.3M HD WebCam: always reports core events
[ 26.143] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event8"
[ 26.143] (--) evdev: 1.3M HD WebCam: Vendor 0x58f Product 0xb002
[ 26.143] (--) evdev: 1.3M HD WebCam: Found keys
[ 26.143] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 26.143] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input10/event8"
[ 26.143] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 26.143] (**) Option "xkb_rules" "evdev"
[ 26.143] (**) Option "xkb_model" "pc104"
[ 26.143] (**) Option "xkb_layout" "us"
[ 26.144] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 26.144] (II) No input driver specified, ignoring this device.
[ 26.144] (II) This device may have been added with another device file.
[ 26.145] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 26.145] (II) No input driver specified, ignoring this device.
[ 26.145] (II) This device may have been added with another device file.
[ 26.145] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 26.145] (II) No input driver specified, ignoring this device.
[ 26.146] (II) This device may have been added with another device file.
[ 26.146] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 26.146] (II) No input driver specified, ignoring this device.
[ 26.146] (II) This device may have been added with another device file.
[ 26.147] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.147] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.147] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 26.147] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.147] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.147] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 26.147] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 26.147] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.147] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 26.147] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 26.147] (**) Option "xkb_rules" "evdev"
[ 26.147] (**) Option "xkb_model" "pc104"
[ 26.147] (**) Option "xkb_layout" "us"
[ 26.148] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.148] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 26.148] (II) LoadModule: "synaptics"
[ 26.148] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.158] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.158] compiled for 1.15.0, module version = 1.7.4
[ 26.158] Module class: X.Org XInput Driver
[ 26.158] ABI class: X.Org XInput driver, version 20.0
[ 26.158] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 26.158] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.158] (**) Option "Device" "/dev/input/event15"
[ 26.316] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 26.317] (**) Option "TapButton1" "1"
[ 26.317] (**) Option "TapButton2" "2"
[ 26.317] (**) Option "TapButton3" "3"
[ 26.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.317] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.370] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event15"
[ 26.370] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 26.370] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 26.370] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.371] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.371] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 26.371] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 26.371] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 26.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.372] (II) No input driver specified, ignoring this device.
[ 26.372] (II) This device may have been added with another device file.
[ 26.373] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event6)
[ 26.373] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 26.373] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 26.373] (**) Acer WMI hotkeys: always reports core events
[ 26.373] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
[ 26.373] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 26.373] (--) evdev: Acer WMI hotkeys: Found keys
[ 26.373] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 26.373] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[ 26.373] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 14)
[ 26.373] (**) Option "xkb_rules" "evdev"
[ 26.373] (**) Option "xkb_model" "pc104"
[ 26.373] (**) Option "xkb_layout" "us"
[ 26.374] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event7)
[ 26.374] (II) No input driver specified, ignoring this device.
[ 26.374] (II) This device may have been added with another device file.
[ 26.375] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 26.375] (II) No input driver specified, ignoring this device.
[ 26.375] (II) This device may have been added with another device file.
[ 26.489] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 26.507] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 26.573] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[ 27.186] (II) evdev: Acer WMI hotkeys: Close
[ 27.186] (II) UnloadModule: "evdev"
[ 27.187] (II) UnloadModule: "synaptics"
[ 27.187] (II) evdev: AT Translated Set 2 keyboard: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: 1.3M HD WebCam: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Video Bus: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Sleep Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Power Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Video Bus: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.187] (II) evdev: Power Button: Close
[ 27.187] (II) UnloadModule: "evdev"
[ 27.254] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 27.404] (EE) Server terminated successfully (0). Closing log file.
It is still not working.
Last edited by hozturk0327 (2014-04-28 14:08:41)

[SOLVED]dhcpcd does not start on boot anymore

Hello,
I reinstalled Arch last night to try and be as to the letter as possible because I had three bad installs( or so I thought https://bbs.archlinux.org/viewtopic.php?id=195192 ) and it was going well. I tweaked some SSD Optimization configs and went to bed.
Today I wanted to install OpenBox so first I tried to update my system with pacman -Syu (without reading the change log or anything of course) and I couldn't download anything. A quick ping to google.com gave an unknown host error. Nothing has changed over night and I rebooted the machine last night a couple of times and I always had internet connection. The guide said that dhcpcd runs automatically on boot and I looked through the change logs at the places I understood and couldn't find anything about this being disabled on boot now. I do see that it was updated in the last 24 hours but again, nothing about auto run on boot being disabled.
Little things like this bug me, I can enable the service using systemctl and call it a day but I was wondering if I was the only one experiencing this. If I'm the only one then it probably isn't a good thing.
SOLVED: Did not read the Beginner's Guide within context of the installation medium.
Last edited by SirMyztiq (2015-03-29 01:20:49)

nullified wrote:
SirMyztiq wrote:I updated the packages and just went to bed.
What packages were upgraded? If I am understanding you correctly, dhcpcd was enabled and working fine before the upgrade, but after the upgrade dhcpcd appears to be disabled. Is that correct? Two bits of informaiton you should post here are the complete list of updated packages and the output of
systemctl status dhcpcd
SirMyztiq wrote:Nothing has changed over night and I rebooted the machine last night a couple of times and I always had internet connection.
You previously say you upgraded then went to bed, so that would be the change. I'm a little confused by these seemingly contradictory assertions.
I apologize for the confusion.
I'll give you the current list of packages as soon as I install a browser on my machine(I'm on my laptop) but I can tell you that all I had last night was the "base" and "base-devel" packages installed. I mainly did tweaking like setting the scheduler dynamically on my ssd to "deadline" following the SSD Optimization wiki and read a bit about OpenBox to make sure I get it right. I also rebooted the computer a couple of times to check for that "time out" bug I mentioned. It all checked out, so I went to bed.
I power her up today, try to do a system update and I wasn't able to. A ping to google.com gave me an "unknown host" error. I checked both the "status" and whether it was "enabled" with their respective systemctl commands and both gave me the feedback that it was not active nor was it enabled.
I'll edit the original post to be more clear and look like I have some grasp of English.

[SOLVED] Redis failing to start on boot

Similar Messages

Maybe you are looking for