[SOLVED] Report Repeating Frame Will Not Print More Than One Page of Data

I have a layout which contains only 1 repeating frame, and is not contained in any other frames. The query that the group of this frame is based on returns 414 rows. The report is a character based report of 180x66. All of the fields in the repeating frame are all in a straight line on a single row.
No matter what I do, the report ends at the bottom of the first page. If I put the frame at row 30, only 36 rows are printed. If I put the frame on the first row, it stops at 66. No mater what I do, it will not continue on the next page.
Any ideas on what could be the problem here?
Thanks,
Kurz
Edited by: Kurzweil4 on Oct 13, 2008 3:35 PM
Print condition was set to All. Changing it to First solved the problem.

Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

Similar Messages

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1050 will not print more than one copy at a time

hp 1050 will not print more than one copy at a time

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

LaserJet 5000 will not print more than one copy at a time.

We have recently moved our office. A LaserJet 5000 which is used as an office printer is shared through one of the computers on the network in the exact same way it was more we moved. But since the move it will not print multiple copies of the same document no matter how many copies the software tells the printer to print it will only print one copy then it stops. Before the moved it worked fine. If the software program such as Word told it to print 100 copies it printed 100 copies now one is the limit. So if you want to printmore than one you have to hit print that many times. It has 172 MB RAM. Does anyone have any ideas of what might have happened????

I have the same issue with a photosmart 2410xi. Did you ever get yours figured out?

HP Officejet Pro 8600 fax from computer will not fax more than one page without canceling job

HP Officejet Pro 8600 MFP running on Windows 7 64 bit. I purchased this printer almost a month ago. The install was simple and straight forward with no apparent problems but when trying to fax from computer the program seems to be only able to fax one page faxes. Any multiple page faxes will show a message "spooling" for 10 to 15 seconds then it will cancel the entire fax. I have tried this in both wired and wireless modes with the same results. I have sent 30 page plus faxes from the printer without any problems, it is only the fax from computer that seems to have memory issues. Any solutions out there?

Have you tried updating the firmware on the printer?
If not, here is a link to the most recent firmware:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101905-4&cc=us&dlc=en&lc=en...
Try that and let me know if it helps to resolve your issue.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
Please help me!

We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

P1006 - networked with XP and VIsta-64 not printing more than 2 pages

Hello - I have a dilemma with my HP P1006. I have the printer directly plugged in (USB) with my XP (32bit) PC. I have a Vista-64 PC networked with it. Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless). My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC? I CAN print more than two pages with items opened in the XP-32.
Things I've done:
1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
2 - marked the printer as "sharing" on the XP-32.
3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
Things I perplexed about:
1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC? Why?
Any thoughts on this situation? Any suggestions are greatly appreciate.
Thank you - Jane.

Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

Firefox will not open more than one window and upon restarting will not open the previous tab and refuses to open bookmarks

Firefox does not open more than one window. I can open plenty of tabs, but not more than one window. Upon closing firefox and trying to restart the browser will not open and needs to be closed through windows task manager. Upon trying to re-open Firefox I receive the 'oops this is embarassing , firefox cannot re-open your tabs" message. When I click on "new session" the bookmarks do not load. It is becoming very frustrating as I am a student and often do lots of research on the web while using lots of open windows.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

HD-DVD created with DVDSP will not use more than one subtitle track

I have made an HD-DVD with DVD Studio Pro 4.1.2, and added 4 subtitle tracks. When I play the dvd on a Toshiba A1, Apples DVD player and in the emulator I can change the subtitle track in the way that I can see the country code is changing, but no matter what it will only show me the subtitles from the first subtitle track. If I try to change the subtitle track using the remote, I can only turn the first subtitle track on and of, not switch between the different subtitle tracks. I'm a skilled dvd author, and have had several other authors look into the project finding no errors in my programming, so could this be a bug in DVD SP? Does it not allow more than one subtitle track?

Could be a bug in DVDSP. Also could be a bug in the players firmware. DVDSP never really made it has a fully functional HD DVD authoring tool.

Re: Can't print more than one page of a PDF

I have Acrobat and Reader 9.3.3. With either program I can't print more than 1 page of any PDF despite changing settings. What will fix this problem? Thanks in advance for your help.

Adobe strongly recommends that you should NOT have Acrobat and Reader installed on the same system. They have the bad habit on stepping on each other's files. You do not need both programs to read PDF files.
You should uninstall Reader and repair Acrobat. I also recommend that you restart after removing Reader and after repairing Acrobat.
Good luck.
Ken Friedman

[SOLVED] Report Repeating Frame Will Not Print More Than One Page of Data

Similar Messages

Maybe you are looking for