[SOLVED] Reports 6i - Anchors Not Visible on Layout

I am using Reports 6i, and I have two frames anchored together, but the anchor is not visible on the layout. If I randomly click with the mouse in the area I know it's in, I can find it, but other than that it is invisible. Even when it is selected, only the little squares where the anchor touches the 2 frames are visible.
I did not have this issue when I was using Reports 2.5. Any ideas on this?
Thanks in advance,
Kurz
Message was edited by:
Kurzweil4

together, but the anchor is not visible on theUsually it doesn't happen like this. Are frames too close to each other? Close the report builder and re-open again and see if anchor shows up.
And also create a new dummy report (don't need to create a query). On layout, add two frames and anchored together. See if it shows up.

Similar Messages

  • Reporting Flag is not visible in the manage screen

    Hi BI Experts, Good morning.
    We load the inventory data daily in the night time which is delta load.
    5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
    From that day onwards its running successfully.
    Yesterday i deleted the bad request from infocube.
    But the Reporting flag is not visible.
    Today i didnot get the records.
    Please can anyone tell me the process.
    Thanks in advance.
    Regards
    Anjali

    Hi Nagesh,
    Still i am not getting reporting flag.
    I tried what did u say.
    And today i did not get the records. Infopackages didnot run. It shows in red.
    I tried to run it manually but it gives error.
    The error message is:
    Short text
        An exception occurred that was not caught.
    What happened?
        The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
         along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program 'SAPLRRMS' has to be
        terminated.
    Please give me the reply.
    Thanks in advance
    Regards
    Anjali

  • Default values for static report parameters are not visible when scheduling

    Hello
    Crystal Reports 2008 Dev
    Crystal Reports Server 2008
    When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
    In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
    However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
    I have published in the following 3 ways:
    Publishing Wizard
    File > Save As > Enterprise from withing Crystal Reports Dev
    CMC > Folders > Add > Crystal Reports
    The results are the same for each method of publishing.
    To try to eliminate any DB issues etc i have created a report that is not attached to a datasource. 
    This test report has one Static parameter. 
    I have set 3 values for its list: Entry A, Entry B, Entry C
    Entry X is set as the parameter Default Value
    The parameter is placed in the details section of the report
    When the report is Viewed it will prompt for parameter entry, with the default value present
    When I try to schedule the report is will not have an entry for its parameter
    It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
    Is this a config problem that i have ?
    Can anyone help me with this ?
    Best regards
    Patrick Coote
    Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
    Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

    Hi Robert
    Thanks for the reply and apologies for not responding sooner.
    What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
    Although this is a bit clumsy, it is sufficient for now
    Best regards
    Patrick

  • BUG REPORT: Messages often not visible on Galaxy S6 / Skype v5.6.0.12393/534

    Since a recent Skype update (within last couple of weeks, so perhaps since release of 5.6) the messages are randomly not showing up during an active Skype call. This can also change during a call so that first some messages are showing up (the "blue bubble" over the video, and also on the message list), but then then they stop showing up (no "blue bubble", and the message is not visible on the message list). To see a newly arrived message that did not get displayed, I can scroll to the top of the message buffer so that the previous entries get loaded in. Now when I scroll back to the bottom, the latest message can be seen. This is obviously not very convenient, especially that on every message view the list to scroll to the top gets longer and longer as more previous messages get loaded in. The problem appears to be present on Galaxy S5 on the latest Skype as well, so it is likely not a model specific but a platform specific issue. This makes for a terrible user experience; please try to fix this as soon as [humanly] possible.  Thank you! 

    Since a recent Skype update (within last couple of weeks, so perhaps since release of 5.6) the messages are randomly not showing up during an active Skype call. This can also change during a call so that first some messages are showing up (the "blue bubble" over the video, and also on the message list), but then then they stop showing up (no "blue bubble", and the message is not visible on the message list). To see a newly arrived message that did not get displayed, I can scroll to the top of the message buffer so that the previous entries get loaded in. Now when I scroll back to the bottom, the latest message can be seen. This is obviously not very convenient, especially that on every message view the list to scroll to the top gets longer and longer as more previous messages get loaded in. The problem appears to be present on Galaxy S5 on the latest Skype as well, so it is likely not a model specific but a platform specific issue. This makes for a terrible user experience; please try to fix this as soon as [humanly] possible.  Thank you! 

  • Report messages are not visible

    when i click on message reports in Operations tab. its not dipaying the report message. Instead it giving meassage like
    "Provider Not Available :JMS Reporting Provider is not deployed, or it is not active ".
    What i have to do in order to see report messages.

    It should be running by default. Is this your own local environment?
    You can check the deployment in WLS console. Click Deployments on the left and find "JMS Reporting Provider". Make sure that it is Active and if not, try to start it.
    If it is not there at all, try to deploy it from BEA_HOME\weblogic92\servicebus\lib\common (remember to start it).
    Hopefully that is all you will need to deploy.

  • Tilt shift and other blur adjustment anchors not visible

    I have the latest updates for Adobe Photoshop CC. Using the advanced blur filters, such as Tilt Shift do not show any adjustment anchors. If I am lucky enough to run my mouse cursor over them, I get a changed mouse cursor to indicate I came move them. but the references lines, anchor points...nothing is visible to show me where to make the changes or boundaries for such adjustments. I had hoped this bug would be fixed, but apparently not. I am unable to  find any other references to it on the forums so maybe it is just me.
    I can run my old Photoshop CS6 and they show up just fine. Any suggestions as to how to fix this?

    I am unable to  find any other references to it on the forums so maybe it is just me.
    Or maybe it might be your GPU driver.

  • Web Analysis reports charts are not visible in work space

    Hi All,
    I have created couple of reports in web analysis 11.1.1.3 with charts embeeded in that reports and when i open the same report in the workspace iam not able to see the chart.
    If any one have faced this issue give me an idea .
    Following are the logs
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795266678" level="ERROR" thread="TP-Processor3" sequence_no="13">
    <time>09 Nov 2009 12:34:26,678</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795329303" level="ERROR" thread="TP-Processor3" sequence_no="14">
    <time>09 Nov 2009 12:35:29,303</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795332502" level="ERROR" thread="TP-Processor3" sequence_no="15">
    <time>09 Nov 2009 12:35:32,502</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795337055" level="ERROR" thread="TP-Processor3" sequence_no="16">
    <time>09 Nov 2009 12:35:37,055</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    Thanks,
    Ram

    I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
    This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
    <?xml version="1.0" encoding="UTF-8"?>
    <deployment>
    <device>
    <repository>
    <mcd name="IrviaDemoApp" namespace="" version="1">
    <action type="install"/>
    <location type="local">
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
    <component name="hpcds.es~irvia_demo_app">
    <applications>
    <application deploy="true" name="IrviaDemoApp"/>
    </applications>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
    </component>
    </location>
    </mcd>
    </repository>
    </device>
    </deployment>
    There is a <source> entry for the mimes directory, where "Component images" are located.
    PD: Sorry about my poor english. I hope you to understand me.

  • File not visible in Layout Editor, but okay in Source Code Editor & Preview

    I just finished editing this page, and uploaded. It is visible on www, but when I go to edit it in Layout Editor, the cursor is blinking on a white background. Nothing appears to be there. However if I change to Source Code Editor or Preview, all my data is there. Here is the link to it - www.engraversnetwork.com/uls_lasers.html.

    Wow! I figured it out. I was cleaning up my meta tags and left the ">" bracket off of the end of the line. Maybe that will help someone later on

  • Crystal Report menu-item not visible on SAP menu of client

    SAP 2007A SP:00 PL:38
    Crystal Report 2008 (on start menu)
    Crystal Report 2.0.0.6
    1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
    2. Installed Crystal Report on one of the clients and it works fine in same way.
    3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5  run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
    a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
    b) However, in Add-on Manager, Crystal Report does not show at all.
    c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
    d) OS is Microsoft XP.
    How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
    Thanks, Ajay Audich

    Hi,
    1) On Add-Remove Programs on the client, I see the following:
    Crystal Reports 2008 Runtime
    Crystal Reports Basic 2008 for SAP Business One
    Microsoft.NET Framework 1
    Microsoft.NET Framework 2.0 Service Pack 2
    Microsoft.NET Framework 3.0 Service Pack 2
    Microsoft.NET Framework 3.5 SP1
    SAP Business One Crystal Reports 2.0.0.6
    2) The settings are:
    Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
    User Preferences Tab-User RT-Preference is set to Default.
    On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
    However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
    3) The user RT on the client is a super-user.
    Thanks.

  • Financial Reporting Studio is not visible in Start Menu in EPM 11.1.2.2

    Hi
    i have installed EPM 11.1.2.2.0, i tried to login to Financial reporting studio and found that it was not installed. Then i manually installed Financial Reporting studio (V31859-01\FinancialReportingStudio\FinancialReportingStudio.exe). I did not receive any error, but i am not able to view Financial Reporting Studio listed in start menu. Where is Financial Reporting studio? how do i login?
    Thanks,
    Veeru

    The client and server have to be exactly the same version, it sometimes worth downloading FR studio from workspace to make sure you have the same version.
    Otherwise log into Oracle support and search for "you are not authorized to use this functionality", you will see lots of results which should help you resolve the problem.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Reports Parameter Form not visible in Forms 6i webpage

    I have my Forms 6i fmx files and Reports rep files runnung off of HP Unix
    within the same directory and yet when I call the report with RUN_PRODUCT,
    I don't get the Parameter Form popup. I left it as default at first, and then I even tried using ADD_PARAMETER(pl_id,'PARAMFORM',TEXT_PARAMETER,'HTML') to my parameter pl_id in my RUN_PRODUCT call. Can anyone tell me why I don't get a Parameter form?

    test

  • [SOLVED] BSPWM: internal paritions not visible in thunar

    Hi,
    I have another problem with bspwm. When I use bspwm there are no internal partitions visible in thunar side bar under "devices", only File system, Places, Network.
    I start bspwm using slim and I do "exec dbus-launch bspwm" in my .xinitrc. I've also tried without dbus-launch, but no luck.
    In other WMs everything works fine, I can see internal partitions of my hdd in thunar.
    Last edited by sejtn4u (2014-01-04 21:53:04)

    Here you go:
    #!/bin/bash
    # settings
    hsetroot -fill /home/zenio/Pictures/arch-gray.jpg &
    ([[ -f ~/.Xresources ]] && xrdb -merge ~/.Xresources) &
    synclient SingleTapTimeout=80 &
    synclient MaxDoubleTapTime=200 &
    synclient PalmDetect=1 &
    synclient VertEdgeScroll=1 &
    syndaemon -t -k -i 2 -d &
    xset s off -dpms &
    xset m 8 10 &
    # my apps
    xcompmgr &
    conky -c /home/zenio/.conkyrcBS &
    (sleep 2 && parcellite -n) &
    sxhkd &
    xsetroot -cursor_name left_ptr &
    export PATH=$PATH:/home/zenio/.config/bspwm
    # WM
    exec dbus-launch bspwm
    #exec dbus-launch herbstluftwm
    #exec dbus-launch snapwm
    #exec dbus-launch spectrwm
    #exec dbus-launch i3
    #exec dbus-launch awesome

  • Execution view not visible

    Hi,
    I am using the full IO example for labview in test stand examples. I haave made some modification to suit my application. When I run this main vi everything appears properly. the execution view is visible and shows the trace of the testing. When I launch this VI from another VI using the invoke node through the RUN VI method, the execution view and the report view are not visible.
    Where could be the error?
    Regards
    Gopal

    Hi Gopal,
    I ran your VI (I simply modifed the Open VI Reference Path to point to my unmodified Full OI:  C:\Program Files\National Instruments\TestStand 3.5\OperatorInterfaces\User\Full-Featured\LabVIEW\TestExec.llb\Full OI - Top-Level VI.vi) and the execution view appeared fine.  Please try this with an unmodified version of the OI.  Assuming you get the same result, you may want to compare the differences and/or make your changes incrementally from the original version.
    Here are the execution views after I launch the OI with your VI: 
    Message Edited by AEDavid on 05-10-2007 05:04 PM
    Cheers,
    David Goldberg
    National Instruments
    Software R&D
    Attachments:
    execution.JPG ‏88 KB
    executionafter.JPG ‏80 KB

  • In webdynpro abap , the ui layout is not visible. please read query fully

    hi , in webdynpro abap , the UI Layout is not visible. 
    I did some settings .
    1) in SICF  t-code , i actvate the all services realted to http . i dont know which services properly need to webdynpro ui layout.
            after activating those services, ui elements are coming . but when i am tryin to drag ui elemetns in to UILayout , it showing some error message. I am not able to drag ui elemetns to ui layout.
    Please tell how to solve this problem.
    1)  if the solution is regarding ip address in host file, please guide me in depth step by step.
    2) if the solution is realted to browser settings , please guide me in depth each step by step for settings   in browser .

    Hi sujana,
    I had a similar problem..
    if u hav a look at ur url you will come to know the following things:
    <schema>://<host>.<domain>.<extension>:<port>/sap/bc/webdynpro/<namespace>/<application name>
    the same url can be traced in SICF.
    Also u need to add the server ip/domain name in the advanced tab in lan settings so that it does go through the proxy..
    You can check the following link: http://help.sap.com/saphelp_nw04s/helpdata/EN/8c/780741375cf16fe10000000a1550b0/content.htm
    Best Regards,
    navin fernandes.

  • Section not visible in the report painter

    Hi Gurus,
    I created a report painter report for showing the P&L statement for a company code. I had to added a new section for calculating the statistical key figures. I was able to display the 2 sections initially, but later after changing some layout the keyfigures section is not visible anymore.
    Please let me know how can I retrieve the Key figures section.
    Thanks

    Hi Christian,
    And if you execute the report you don't see the second section?
    Yes, I am able to see the section in the edit mode and not when execute the report.
    In the report layout "formatting / report layout" in the area "rows / treatment of zero rows" are the rows hidden if the value is zero?
    The standard section layout has zero rows hidden. I tried changing it to print zero rows, but that didn't help.
    Maybe you have a selection where you only have zero values in this section so it does not appear?
    I was able to see the section in execute mode once, but then I tried to change the layout which caused me this problem. Please let me know if you have any other inputs.

Maybe you are looking for