[SOLVED] Request to update community/patchage from 0.5.0 = 1.0.0

Patchage 1.0.0 has just been released. For those who don't know: patchage allows you to easilly route your audio streams when using JACK Audio Connection Kit. This is kind of a big deal when using JACK as it's basically the most important interface you use when making or changing routes.
Version 0.5.0 is available in community, but hasn't been updated since 2012-02-05. In the AUR patchage-svn is available but is also outdated (2011-12-16) and won't compile correctly.
Because Arch Linux intends to be a good platform for pro audio use (according to this wiki page) it is mandatory that patchage is up to date. Therefore I place this request (hopefully in the right place, please correct me if it's not) to update patchage to the latest version.
Last edited by shutdown -h now (2014-05-02 10:54:08)

tomk wrote:Off-topic: let me adjust your perception here. The wiki is community-maintained, so the presence (or absence) of any particular wiki page has nothing at all to do with Arch Linux's intentions.
Well you're completely right ofcourse, and I actually knew that, so must be some faulty or misleading wording on my part.
The package was updated only a day after it got flagged outdated, so I would say that's an awesome response time! Unfortunately I can't yet get it to play together with jack2, but that's entirely another issue.

Similar Messages

Hello I have just updated my iphone 5 and it keeps requesting 2 old email addresses from I quests my old laptop any idea how to stop this ? Thanks

Hello I have just updated my iphone 5 and it keeps requesting 2 old email addresses from I quests my old laptop any idea how to stop this ? Thanks

Log out of the old ID, then login using the new one with the correct pw.

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem

All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?

TS1363 when i try to update my apps from itunes on my laptop i keep getting an error saying "we could not complete your itunes store request an unknown error occurred (0x800b0101)."

when i try to update my apps from itunes on my laptop i keep getting an error saying "we could not complete your itunes store request an unknown error occurred (0x800B0101)." this has been happening for a few weeks ive tried downloading the new version of itunes and checked the firewall settings but it still wont let me upgrade apps??

Thanks jdnjo. Your fix also worked in Windows 8!

Has anyone received an email purporting to come from Apple Worldwide support requesting an update to apple profile details under the "know your customer" legislation? Or is this a scam?

has anyone received an email purporting to come from Apple Worldwide support requesting an update to apple profile details under the "know your customer" legislation? Or is this a scam?

Smells rather "phishy" to me.

Trying to update an app from appstore (updates list),but requests a pass for an apple id that is not mine! how can it be?

Trying to update an app from appstore list,but requests a pass for an apple id that is not mine! how can it be?

The app must have been downloaded by somebody else that used their Apple ID on your iPad, since purchases are always tied to the ID that was used to make the purchase. Unless your iPad is glued to your side 24 hours a day and nobody has ever used the iPad but you, then anybody that has ever used your iPad could have done it.

TS2446 I have this email with this adress request account update.Is this a valid request from Apple?AppleID@customers.appstore.70.ca

Hello I have this email requesting to update account information.Was wondering if it is a valid request or fraudulent?

Apple will never, except for some customer surveys which will never ask for personal information, never uses a domain other than their own apple.com domain, and never asks you for account information in an email. As stedman said, it's a phish. Delete it and do not respond to it in any way.
Regards.

Can't update community repo [solved]

Hello,
I'm trying to update my system but any time I try to do it I can't update community repo (I can update the others). This is the output for a simple "pacman -Syu":
:: Synchronizing package databases...
core is up to date
extra is up to date
community 170.0K 190.1K/s 00:00:01 [#####################] 100%
error: could not extract 6 ((Empty error message))
error: failed to update community (unexpected system error)
archlinuxfr is up to date
:: Starting full system upgrade...
local database is up to date
The problem started after my system freezed.
Any idea? Thank you
Last edited by serjor (2009-07-05 17:56:43)

serjor wrote:
Hello,
I'm trying to update my system but any time I try to do it I can't update community repo (I can update the others). This is the output for a simple "pacman -Syu":
:: Synchronizing package databases...
core is up to date
extra is up to date
community 170.0K 190.1K/s 00:00:01 [#####################] 100%
error: could not extract 6 ((Empty error message))
error: failed to update community (unexpected system error)
archlinuxfr is up to date
:: Starting full system upgrade...
local database is up to date
The problem started after my system freezed.
Any idea? Thank you
I tried to extract the community db (located at /var/lib/pacman/community.db.tar.gz) and it throws an EOF error, so may be the problem isn't at my computer.

Some numbers docs not opening but requesting app update

As the picture shows, and the title suggests, when trying to open some docs in numbers I recieve a request to update the app. No update is available.
This is on both my iPhone 4s and iPad 3. Both are running up to date software. It also happens in pages too.
I have iCloud work installed on my Win 7 laptop, and only noticed this since iCloud work was released just after ios8 was.
I have reinstalled pages as well. Any ideas what I can do here?
Thanks!

Really surprised there was no response from the community on that one, but not a big deal. I just had to reset passwords all over the place.
But now I've got some other weirdness, possibly iCloud related. I did a repair permissions and Pages was able to open docs from iCloud. But now it's happening again. I can't open from iCloud and I tried downloading from iCloud through a browser but Pages still won't open the docs. I decided to try signing out of iCloud and that just sucked up all processes, system ground to a halt while signing out was supposedly going on. I had to force quit everythig else and still it didnt complete signing out. I was able to restart
But now i have to reauthenticate with iCloud and its another 15 minutes gettig everything back in sync. This is miserable. I was able to open a Pages doc finally. :(

Fake request to update flash player

Hi,
when I go to a website by safari or any other web browser such as chrome, there is a warning pop-up about requested to update flash player such as "http://facebook.com WARNING ! Your Flash Player may be out of date. Please update to continue". I tried to deleted all web browser data, history also and restarted the Ipad. But the problem is still happen. Please advise me how to solve it or do you think it it a virus?
Tks

Hi all, I got the same problem as you all. I couldn't go into Google, Facebook & Youtube, which the virus immediately prompt me to update with Flash player pro. But today I sucessfully fixed it. You all may refer to below as referennce steps: 1) Hard reset your modem back to factory setting and after reseting done re-setup your DSL modem based on your ISP provided log on information. 2)I did have apple airport express, which I also doing the same hard reset and changing all my password & SSID naming. That's all is what I did to fixed the problem. I believe the infection was came from ISP which after I updated my IP TV from my country set top box (Android OS base) 2 days ago, guess this kind of virus will attack & infected the modem/Router. I do not believe Mac OS X 10.9.2 can easily get infected by virus. (Past 5 years using Mac & iOS mobile device never ever get any single virus attack) Hope this will help.. B/Regards...Alex Ooi

Can Lync common area phone request device updates?

Hi,
simple question: can a Lync Phone Edition device (LPE, Aries class, Polycom CX500 / CX600 etc.) request device updates, when the phone is hosting a common area phone contact object?
Fortunately I know the answer: it seems NOT, I see in the system settings that there is an error for the last device update request. However as soon as I login with a normal user account, the device update request status is 200, and the phone gets updated
under 5 minutes and reboots properly.
While I know the answer, I would like to get feedback from MS: is this a design defect of the product, a bug in the way common area phone contact object authenticates on the Lync webservices or something else? Other peoples experience is more than welcome!

Hi,
You can feedback on the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Update PRODH field from table T179T

hi,
i want to update PRODH field from table T179T into table VBRP. for this we
need to take selection option also.
selection option will be :
·             Sales Organization (field VBRK-VKORG)
·       Billing Date Range (VBRK-FKDAT)
·       Distribution Channel (Vbrk-vtweg
while i have done this for one field by using hard code but like:
TABLES: VBRP.
CLEAR VBRP.
UPDATE VBRP SET PRODH = 'PLC01' WHERE VBELN = '0008300051'.
SELECT SINGLE * FROM VBRP WHERE VBELN = '0008300051'.
WRITE: VBRP-VBELN,VBRP-PRODH.
but this is not the right way. please guide me how to solve this.

TABLES: VBRP.
CLEAR VBRP.
UPDATE VBRP SET PRODH = 'PLC01' WHERE VBELN = '0008300051'.
<b>commit work.</b>
SELECT SINGLE * FROM VBRP WHERE VBELN = '0008300051'.
WRITE: VBRP-VBELN,VBRP-PRODH.
use commit work after update statement.
But this code would make vbrp-vbeln as plc01 only.
If you want to get the prodh value from t179t, then write a sleect on t179t and then update.
TABLES: VBRP.
CLEAR VBRP.
select single prodh
from t179t
where......
UPDATE VBRP SET PRODH = t179-prodh WHERE VBELN = '0008300051'.
commit work.
SELECT SINGLE * FROM VBRP WHERE VBELN = '0008300051'.
WRITE: VBRP-VBELN,VBRP-PRODH.

Requesting Windows Experience Index scores from anyone running WIN 7 on either current-model 13" MBPs... Thanks!

Requesting Windows Experience Index scores from anyone running WIN 7 on either current-model 13" MBPs... Thanks!

Hi mchainmchainmch,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Start and stop the Communication channel from Java Mapping

How to start and stop the Communication channel from Java Mapping in XI 3.0
Scenario PI - > MQ -> Third Party web application
Web application is down and then Communication channels are stop manually .
We need to automate this process,
MQ Solution - Trigger will be set in MQ which will be called when web application is stopped
Trigger will send u201CSTOP u201C message to PI
How to configure PI scenario to stop different com channels when this message received ?

check this link: http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/frameset.htm
make sure that MQ send http request to PI. i dont think a configuration scenario is required in PI. Only roles should be enabled with proper user provided to MQ team.
However, for security reasons, you can configure a scenario if you dont want to expose PI infrastructure directly to 3rd parties.

When updating via iTunes from 7.0.2 to iOS 8 was error -1.

When updating via iTunes from 7.0.2 to iOS 8 was error -1. It saids to me that i need to restore my iPad to factory settings. But i have too many images needed to me. I have no restores (but iTunes make one before updating). How i can to restore my photos?
iPad mini, 16Gb
A1432

Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

[SOLVED] Request to update community/patchage from 0.5.0 = 1.0.0

Similar Messages

Maybe you are looking for