[solved] resume from s3 by keyboard/mouse input

PC wouldn't resume via keyboard input. It works after a BIOS reset now. I must have set a wrong option somewhere.
I also had to do "echo USBE >> /proc/acpi/wakeup".
Last edited by demian (2010-05-06 15:25:46)

I tried with [OS] and the USB devices do receive power during sleep but can't bring the computer out of sleep.
Can anyone with BIOS 1.6 on a 890gxm confirm that the USB box is available?
Quote from: foo_fighter on 30-May-10, 04:47:22
Yup, that selection is grayed out and I cannot even select it, it just passes right over it. Unlike the cell menu where its gray but you can still select it and change the voltages.
I will try switching to [OS] and hopefully that helps.

Similar Messages

  • KT4V doesn't resume from S3 with Keyboard/Mouse

    Hi there,
    I have a problem with a KT4V, I can get into S3 state without problem and resume by using the power switch.
    However, it refuses to resume using the keyboard. I have tried setting the "wake from keyboard" option in the bios to any key or to a specific key with no luck. ACPI is ON, APM is on, the bios settings are otherwise unchanged from their default config.
    I'm using a "no brand" PS2 keyboard, which has a "sleep" and  "wake" buttons, and the "sleep" button works fine. I have tried with other keyboards (mistubishi...) with the same result. My mouse is a MS intellimouse optical on the PS2 port. The light at the tail of the mouse is off while in S3 state.
    My config is pretty standard: Windows XP SP1, GForce2MX, 512MB, Athlon 2100+... the box is otherwise stable and good.
    ok, you might say I'm being picky, but the case is under the desk and behind some casing, and it's a bit of a pain to access the power switch :-)
    Thanks
    eric

    Quote from: Fredrik on 30-December-08, 04:12:24
    Bet you have a power supply unit, too.
    When or how did the trouble start?
    Well, I have 2 of them. The main is Thermaltake PurePower 750W and the auxiliary (powering drives and case fans) is Hiper Type-R 480W in 3R Systems R900 chassis.
    The problem is there from the start and the same setup (except for motherboard) worked perfectly with Asus M2N32-SLI Deluxe motherboard.
    I've recently tried Vista x64 - with the same symptoms.

  • MacBook Pro resumes from sleep, but keyboard types symbols as opposed to correct letters

    Hi, all,
    Having been a mac owner for a few years now, I guess it actually shows the quality of the product that this is the first time I've had to post on this site.
    I've recently upgraded from my 2008 model MacBook to an early 2011 model MacBook Pro 17" with Lion. This machine was brand new when I purchased it, and is a very lovely bit of kit.
    The problem comes from the sleep functionality. Approximately one time of three, when I resume from sleep, the keyboard will be malfunctioning. What I mean by this is that when I type letters, they come out as symbols instead. I haven't been sharp enough to get a direct mapping of A-Z yet (I will do next time), but these aren't the 'ALT' key symbols (å∂ß∫å˙∂©ß), they're more like this (which is what I typed into Notepad last time this happened) =
    ƒ∆∂∆ßåß∂ƒ∂∆ß∆å˚¬ß∆¬ß
    In order to resolve this, I need to restart the computer, which, thus far, has resolved the issue every time. That said, it's a bit of a pain, so would like to know what's going on and if there is any way to prevent it.
    All the software on the mac is up to date at time of writing, there have been no expansions to the machine (yet), so it's exactly as shipped. It's the 2.2GHz i7 Quad Core device, and is the first one supporting the thunderbolt graphics connector.
    Does anyone have any idea about this? Could it be a hardware problem (if so, I want to return it asap to get it sorted). I've looked all over google for this, but not found a single result, so was keen to see if anyone on here had experienced it before I start the arduous process of working out if it's a hardware issue.
    Cheers,
    SB

    No one else experienced anything like this, then?

  • Last upgrade killed KDM keyboard/mouse input

    Hi, I performed a pacman -Syu last night and a few packages were upgraded. Now, when I reach the KDM login, it does not detect keyboard or mouse input. However during the boot process it detected the keyboard properly. Of course, now I can't use ctrl-alt-f1 to reach a VC from the KDM screen.
    The relevant snippet of pacman.log is below. I took a look and I tried downgrading a few packages from a livecd: xproto and xorg-xinit, but without success. I actually cleared my pacman cache a while ago because of a pacman error, so I don't have very many package backups unfortunately. Perhaps somebody can pinpoint the package that is giving me all this trouble?
    Thanks!
    [2010-12-20 02:05] synchronizing package lists
    [2010-12-20 02:12] Running 'pacman -S -u'
    [2010-12-20 02:12] starting full system upgrade
    [2010-12-20 02:20] removed pycairo (1.8.10-2)
    [2010-12-20 02:20] upgraded arandr (0.1.3-5 -> 0.1.4-1)
    [2010-12-20 02:20] upgraded bash (4.1.009-1 -> 4.1.009-3)
    [2010-12-20 02:20] upgraded bluez (4.80-1 -> 4.82-1)
    [2010-12-20 02:20] upgraded run-parts (3.2.3-1 -> 3.4.1-1)
    [2010-12-20 02:20] Clearing symlinks in /etc/ssl/certs...done.
    [2010-12-20 02:20] Updating certificates in /etc/ssl/certs... 141 added, 0 removed; done.
    [2010-12-20 02:20] Running hooks in /etc/ca-certificates/update.d....done.
    [2010-12-20 02:20] upgraded ca-certificates (20090814-3 -> 20090814+nmu2-1)
    [2010-12-20 02:20] upgraded cdrkit (1.1.10-1 -> 1.1.11-1)
    [2010-12-20 02:20] upgraded chromium (8.0.552.215-1 -> 8.0.552.224-1)
    [2010-12-20 02:20] upgraded device-mapper (2.02.77-1 -> 2.02.78-1)
    [2010-12-20 02:20] upgraded dhcpcd (5.2.8-1 -> 5.2.9-1)
    [2010-12-20 02:20] warning: /etc/profile installed as /etc/profile.pacnew
    [2010-12-20 02:20] warning: /etc/hosts installed as /etc/hosts.pacnew
    [2010-12-20 02:20] warning: /etc/gshadow installed as /etc/gshadow.pacnew
    [2010-12-20 02:20] upgraded filesystem (2010.10-1 -> 2010.12-1)
    [2010-12-20 02:20] upgraded libpulse (0.9.22-1 -> 0.9.22-2)
    [2010-12-20 02:20] upgraded fluidsynth (1.1.3-1 -> 1.1.3-2)
    [2010-12-20 02:20] upgraded foomatic-db (4.0.5_20101024-1 -> 4.0.6_20101215-1)
    [2010-12-20 02:20] upgraded foomatic-filters (4.0.5_20101024-1 -> 4.0.6_20101215-1)
    [2010-12-20 02:20] upgraded foomatic-db-engine (4.0.5_20101024-1 -> 4.0.6_20101215-1)
    [2010-12-20 02:20] upgraded zlib (1.2.5-2 -> 1.2.5-3)
    [2010-12-20 02:20] upgraded ghostscript (9.00-1 -> 9.00-2)
    [2010-12-20 02:21] upgraded git (1.7.3.3-1 -> 1.7.3.4-1)
    [2010-12-20 02:21] upgraded gnutls (2.8.6-1 -> 2.10.4-1)
    [2010-12-20 02:21] upgraded gparted (0.7.0-1 -> 0.7.1-1)
    [2010-12-20 02:21] upgraded gpsd (2.95-7 -> 2.95-8)
    [2010-12-20 02:21] upgraded graphicsmagick (1.3.7-3 -> 1.3.12-1)
    [2010-12-20 02:21] upgraded libdrm (2.4.22-1 -> 2.4.22-3)
    [2010-12-20 02:21] upgraded libgl (7.9-1 -> 7.9.0.git20101207-2)
    [2010-12-20 02:21] upgraded intel-dri (7.9-1 -> 7.9.0.git20101207-2)
    [2010-12-20 02:21] upgraded opencv (2.2.0-1 -> 2.2.0-2)
    [2010-12-20 02:21] upgraded kipi-plugins (1.6.0-1 -> 1.6.0-2)
    [2010-12-20 02:21] upgraded libdbusmenu-qt (0.6.4-1 -> 0.6.6-1)
    [2010-12-20 02:21] upgraded libdvdcss (1.2.10-1.1 -> 1.2.10-2)
    [2010-12-20 02:21] upgraded libindi (0.7-1 -> 0.7.2-1)
    [2010-12-20 02:21] upgraded libmpdclient (2.2-1 -> 2.3-1)
    [2010-12-20 02:21] upgraded libogg (1.2.1-1 -> 1.2.2-1)
    [2010-12-20 02:21] upgraded libpcap (1.1.1-1 -> 1.1.1-2)
    [2010-12-20 02:21] upgraded lvm2 (2.02.77-1 -> 2.02.78-1)
    [2010-12-20 02:21] upgraded mesa (7.9-1 -> 7.9.0.git20101207-2)
    [2010-12-20 02:21] upgraded mpd (0.15.15-2 -> 0.16-2)
    [2010-12-20 02:21] upgraded pkg-config (0.25-2 -> 0.25-3)
    [2010-12-20 02:21] upgraded procps (3.2.8-2 -> 3.2.8-3)
    [2010-12-20 02:21] installed python2-cairo (1.8.10-1)
    [2010-12-20 02:21] upgraded pycups (1.9.51-2 -> 1.9.53-1)
    [2010-12-20 02:21] upgraded pysmbc (1.0.9-1 -> 1.0.10-1)
    [2010-12-20 02:21] upgraded python-beautifulsoup (3.0.8.1-1 -> 3.2.0-1)
    [2010-12-20 02:21] upgraded raptor (1.4.21-1 -> 1.4.21-2)
    [2010-12-20 02:21] upgraded rasqal (0.9.20-1 -> 0.9.21-1)
    [2010-12-20 02:21] upgraded redland (1.0.12-2 -> 1.0.12-3)
    [2010-12-20 02:21] upgraded sdparm (1.05-1 -> 1.06-1)
    [2010-12-20 02:21] upgraded system-config-printer-common (1.2.5-3 -> 1.2.5-4)
    [2010-12-20 02:21] upgraded telepathy-glib (0.12.5-1 -> 0.12.6-1)
    [2010-12-20 02:21] upgraded unrar (4.0.2-1 -> 4.0.3-1)
    [2010-12-20 02:21] upgraded vpnc (0.5.3-2 -> 0.5.3-3)
    [2010-12-20 02:21] upgraded xorg-xauth (1.0.4-1 -> 1.0.5-1)
    [2010-12-20 02:21] upgraded xorg-xbacklight (1.1.1-1 -> 1.1.2-1)
    [2010-12-20 02:21] upgraded xorg-xinit (1.3.0-1 -> 1.3.0-2)
    [2010-12-20 02:21] upgraded xproto (7.0.19-1 -> 7.0.20-1)

    Alright, disabled KDM and logged into virtual console and startx. Same issue when I get into X/KDE, keyboard and mouse input not detected. Any idea as to which package might be the culprit? Unfortunately I am away from home for a couple weeks and can't get to my backup clones...

  • Running vmware-user-suid-wrapper stops keyboard/mouse input

    I'm attempting to run Arch under VMWare Fusion 3 in Mac OS X.  I have previously run Arch on a variety of Windows and Linux machines using VirtualBox without issue. (I would use VirtualBox on the Mac as well, but it's performance is incredibly slow.)
    I followed the instructions in the Wiki here:
    https://wiki.archlinux.org/index.php/In … _in_VMware
    However, when I run the command as listed in the guide:
    $ ls -l /usr/bin/vmware-user-suid-wrapper
    the wrapper's permissions are
    -rwsr-sr-t 1 root root
    rather than what is shown in the wiki.  If I then attempt to execute vmware-user-suid-wrapper, the system stops accepting input from my mouse and keyboard.  Executing the command via sudo does nothing, nor does running chmod 4755 as suggested in the guide.
    Any ideas?
    Last edited by ptmkenny (2011-03-22 16:04:48)

    Hello,
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Crashes when resuming from standby with Bluetooth mouse

    Unless I turn off my Logitech Bluetooth mouse BEFORE entering sleep, the Mac crashes completely when trying to wake it up. the screen doesn't turn on, unless I plug in an external display adapter -- in which case it just turns on into a blank blue desktop.
    So long as I remember to turn off the mouse before sleep and back on after resuming, all is well. But it's a pain to remember and if I forget, I have to physically reset--loosing all unsaved work.
    Any ideas?

    if you are having a sleep issue you could possibly try this troubleshooting step of resetting your SMC http://docs.info.apple.com/article.html?artnum=303319

  • Keyboard & Mouse Not Working on Resume From Sleep

    About 1/10 of the time when I resume from sleep my keyboard and mouse do not work. They wake the computer (a 27" iMac) but do not work any longer past that, requiring me to hard reboot my computer (holding the power button to turn off then rebooting).
    I have no issues using my keyboard and mouse, both bluetooth, at all. When this happens, even hooking up an external keyboard does me no good as it also does not work. Sleeping and reawakening does no good either.
    Anyone have any ideas? So far nothing seems amiss when it comes to my configuration or hardware. Thanks in advance!

    I have experienced the same problem which affects a 3rd party USB mouse and my wireless trackpad. Both may be unresponsive when the computer (late 2009 21.5" iMac) wakes. When it happens both devices are affected, never just one of them.
    I don't need to reboot to fix the problem.  The mouse responds by disconecting and re-connecting. The trackpad reconnects by holding its power button for a few seconds.
    The problem does not affect my wireless keyboard.
    No clues on the Console. Sorry I can't be more help.

  • X1 USB mouse resumes from standby even though disabled in Device Manager

    I don't want mouse movement to resume the X1 from standby (sleep). So I have gone into Win 8.1 Device Manager under power mgt tab and unchecked the box that enables this. However, the X1 still resumes from standby if the mouse is moved.
    Is there something else -- like in the BIOS -- that I need to do?

    I have also found that keyboard does not seem to be able to wake this computer in any case, even though the box is checked in Device Mgr for keyboard to do so. However, if I uncheck the box for keyboard, then mouse does not wake computer either. It is as though the checkbox in Device manager for the mouse is not relevant. Only the checkbox for keyboard matters as regards the mouse, and the keyboard can't wake the computer regardless.

  • Touchpad and trackpoint problems, especially when resuming from sleep

    I am having persistent problems with the touchpad and trackpoint on my L530.  I prefer to use the trackpoint usually, and found that the touchpad was super-sensitive and caused the cursor to jump around during normal (touch) typing so I disabled the touchpad.  Next time the thinkpad resumed from sleep mode, the mouse was frozen.  Nothing would reactivate it.  I had to switch user, which temporarily fixed it, and then reactivate the touchpad. 
    If I try and change trackpad settings at any time other than directly after a reboot, the settings are greyed-out and I can't touch them. Right now, both trackpad and trackpoint are completely dead again, but I've plugged in a USB mouse and that seems to be working, so I've given up fiddling with it.  This will be a pain when I'm moving around with the laptop though!
    The OS is Windows 7.  Yesterday I went looking for the most recent driver, uninstalled the existing one (as per guidance) and installed the new driver.  No luck.  
    I've heard this is a common problem and apparently installing a generic driver works, but I'm not completely sure what to use.  Anyone know? 
    Oh, and I'm not sure if this is related, but quite often when I resume from sleep mode the keyboard is also dead.  However, if I switch user it comes back to life.  So annoying but not the end of the world.

    Thanks for posting this information in this forum. You just saved me a couple thousand dollars!
    Based on my experience if you want to get this problem fixed as soon as possible you need to do the following:
    1. www.apple.com/feedback
    2. Post a video of the problem on www.youtube.com
    3. Send www.apple.com/feedback a link to the video on youtube.
    4. Encourage others to visit your youtube video and to post their own.
    Good luck!

  • [SOLVED] Mouse/laptop freeze on the "2nd" resume from sleep/standy.

    I've install Arch on my Alienware M14x R2 and everything works fine except this single issue. If I need to close the laptop lid and let it enter sleep, it does so fine and resumes perfectly. But, if I don't reboot the laptop and have to close the lid for a second time its ALWAYS freezes on the 2nd resume. The mouse pointer does not respond and the keyboard as well. Even tried external mouse and nothing.
    I've searched the forums for hours yesterday and saw similar complaints for those running XFCE. So lastnight I re-installed Arch with Kde-meta and tested resume a few times and it was working just fine. Then just resumed the 2nd time today and notice it again. Now the only thing related I can think off (hope this does not throw things down the wrong direction) is that I saw a "Nvidia X Settings" app in the start menu under "settings". I launched it to have a look but it ask to run the following command as root first...
    sudo nvidia-xconfig
    ...running that informed me that it generated this file: /etc/X11/xorg.conf
    And so after rebooting, both startx and xinit would fail to start KDE (tried them independently).
    To revert, I did:
    mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bk
    I also did pacman -Rsn xf86-video-intel then pacman -S xf86-video-intel
    ... tried rebooting and kde this time auto started again. However, still after every 2nd resume from opening lid, everything freezes and have to hold in the power button to power off.
    I'm pretty sure I have some drivers or packages mixed up.
    What's the best way to solve this? Or best command to see whats running what etc (drivers-wise)? Originally I used the chart in the wiki page https://wiki.archlinux.org/index.php/xo … stallation and installed the following packages:
    xf86-video-intel (for the inter graphics card)
    nvidia (for the Nvidia GPU)
    bumblebee (as per archlinux.org.ru/forum/topic/12113/?page=3)
    EDIT:
    Here's right from where it froze using journalctl -r. "lid close" is at the bottom  and the most recent up till frozen at the top...
    -- Reboot --
    Sep 19 18:39:55 ArchLinux dbus[262]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
    Sep 19 18:39:55 ArchLinux systemd-sleep[2265]: Suspending system...
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <warn> (pid 1780) unhandled DHCP event for interface wlp8s0
    Sep 19 18:39:55 ArchLinux dbus[262]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
    Sep 19 18:39:55 ArchLinux kernel: IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> NetworkManager state is now ASLEEP
    Sep 19 18:39:55 ArchLinux kernel: cfg80211: Calling CRDA to update world regulatory domain
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> Removing DNS information from /usr/bin/resolvconf
    Sep 19 18:39:55 ArchLinux kernel: wlp8s0: deauthenticating from 00:1c:10:2b:1b:61 by local choice (Reason: 3=DEAUTH_LEAVING)
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> (wlp8s0): canceled DHCP transaction, DHCP client pid 1780
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <warn> (wlp8s0): DHCP client pid 1780 didn't exit, will kill it.
    Sep 19 18:39:55 ArchLinux kernel: IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: dhcpcd[1780]: wlp8s0: removing interface
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: dhcpcd[1780]: received signal TERM from PID 260, stopping
    Sep 19 18:39:55 ArchLinux dhcpcd[1780]: wlp8s0: removing interface
    Sep 19 18:39:55 ArchLinux dhcpcd[1780]: received signal TERM from PID 260, stopping
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> (wlp8s0): deactivating device (reason 'sleeping') [37]
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> (wlp8s0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> (enp7s0): device state change: unavailable -> unmanaged (reason 'sleeping') [20 10 37]
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> sleeping...
    Sep 19 18:39:55 ArchLinux NetworkManager[260]: <info> sleep requested (sleeping: no enabled: yes)
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux kernel: pci_bus 0000:01: Allocating resources
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux kernel: pci_bus 0000:09: Allocating resources
    Sep 19 18:39:54 ArchLinux kernel: pci_bus 0000:08: Allocating resources
    Sep 19 18:39:54 ArchLinux kernel: pci_bus 0000:07: Allocating resources
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:00:1f.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ahci 0000:00:1f.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: lpc_ich 0000:00:1f.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1d.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: sdhci-pci 0000:09:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: rtsx_pci 0000:09:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.3: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ath9k 0000:08:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.2: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: atl1c 0000:07:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:1c.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ehci-pci 0000:00:1a.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: mei_me 0000:00:16.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: xhci_hcd 0000:00:14.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pci 0000:01:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: snd_hda_intel 0000:01:00.1: Max Payload Size 16384, but upstream 0000:00:01.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
    Sep 19 18:39:54 ArchLinux kernel: pcieport 0000:00:01.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: using default PCI settings
    Sep 19 18:39:54 ArchLinux kernel: ivb_uncore 0000:00:00.0: no hotplug settings from platform
    Sep 19 18:39:54 ArchLinux kernel: i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    Sep 19 18:39:54 ArchLinux systemd-logind[261]: Lid closed.
    Last edited by hydn (2014-09-23 21:19:18)

    xorg.0.log: ( i think its old but that's all the contents)
    [ 27.294]
    X.Org X Server 1.16.0
    Release Date: 2014-07-16
    [ 27.294] X Protocol Version 11, Revision 0
    [ 27.294] Build Operating System: Linux 3.15.5-2-ARCH x86_64
    [ 27.294] Current Operating System: Linux ArchLinux 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
    [ 27.294] Kernel command line: initrd=\initramfs-linux.img root=/dev/sdb2 rw
    [ 27.294] Build Date: 31 July 2014 11:53:19AM
    [ 27.295]
    [ 27.297] Current version of pixman: 0.32.6
    [ 27.300] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 27.300] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 27.306] (==) Log file: "/home/hydn/.local/share/xorg/Xorg.0.log", Time: Fri Sep 19 16:21:01 2014
    [ 27.307] (==) Using config file: "/etc/X11/xorg.conf"
    [ 27.309] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 27.309] (==) ServerLayout "Layout0"
    [ 27.309] (**) |-->Screen "Screen0" (0)
    [ 27.309] (**) | |-->Monitor "Monitor0"
    [ 27.309] (**) | |-->Device "Device0"
    [ 27.309] (**) |-->Input Device "Keyboard0"
    [ 27.309] (**) |-->Input Device "Mouse0"
    [ 27.309] (==) Automatically adding devices
    [ 27.309] (==) Automatically enabling devices
    [ 27.309] (==) Automatically adding GPU devices
    [ 27.309] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 27.309] Entry deleted from font path.
    [ 27.309] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 27.309] Entry deleted from font path.
    [ 27.309] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 27.309] Entry deleted from font path.
    [ 27.309] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 27.309] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 27.309] Entry deleted from font path.
    [ 27.309] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 27.309] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 27.309] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 27.309] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 27.309] (WW) Disabling Keyboard0
    [ 27.309] (WW) Disabling Mouse0
    [ 27.309] (II) Loader magic: 0x818d80
    [ 27.309] (II) Module ABI versions:
    [ 27.309] X.Org ANSI C Emulation: 0.4
    [ 27.309] X.Org Video Driver: 18.0
    [ 27.309] X.Org XInput driver : 21.0
    [ 27.309] X.Org Server Extension : 8.0
    [ 27.312] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 27.312] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 27.312] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 27.314] (--) PCI:*(0:0:2:0) 8086:0166:1028:0552 rev 9, Mem @ 0xd2000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
    [ 27.314] (--) PCI: (0:1:0:0) 10de:0fd1:1028:0552 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
    [ 27.314] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 27.314] (II) LoadModule: "glx"
    [ 27.314] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 27.316] (II) Module glx: vendor="X.Org Foundation"
    [ 27.316] compiled for 1.16.0, module version = 1.0.0
    [ 27.316] ABI class: X.Org Server Extension, version 8.0
    [ 27.316] (==) AIGLX enabled
    [ 27.316] (II) LoadModule: "nvidia"
    [ 27.316] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 27.316] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 27.316] compiled for 4.0.2, module version = 1.0.0
    [ 27.316] Module class: X.Org Video Driver
    [ 27.316] (II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:04 PDT 2014
    [ 27.316] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 27.316] (++) using VT number 1
    [ 27.316] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 27.316] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
    [ 27.316] (EE) No devices detected.
    [ 27.316] (EE)
    Fatal server error:
    [ 27.316] (EE) no screens found(EE)
    [ 27.316] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 27.317] (EE) Please also check the log file at "/home/hydn/.local/share/xorg/Xorg.0.log" for additional information.
    [ 27.317] (EE)
    dmesg after hard reset/shutdown:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.3-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sdb2 rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000094daffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000094db0000-0x00000000961affff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000961b0000-0x000000009a7befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a7bf000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0x93c3d018-0x93c52e57] usable ==> usable
    [ 0.000000] e820: update [mem 0x93c2c018-0x93c3c057] usable ==> usable
    [ 0.000000] e820: update [mem 0x93c20018-0x93c2b857] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x0000000093c20017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000093c20018-0x0000000093c2b857] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000093c2b858-0x0000000093c2c017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000093c2c018-0x0000000093c3c057] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000093c3c058-0x0000000093c3d017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000093c3d018-0x0000000093c52e57] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000093c52e58-0x0000000094daffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000094db0000-0x00000000961affff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000961b0000-0x000000009a7befff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009a7bf000-0x000000009aebefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f47000) (15MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001f47000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fdb8000) (1021MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007fdb8000-0x0000000080000000) (2MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000080000000-0x0000000092279000) (290MB)
    [ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000092279000-0x00000000931c0000) (15MB)
    [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000931c0000-0x00000000931e0000) (0MB)
    [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000931e0000-0x0000000093c20000) (10MB)
    [ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x0000000093c20000-0x0000000093c53000) (0MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000093c53000-0x0000000094db0000) (17MB)
    [ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x0000000094db0000-0x00000000961b0000) (20MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000961b0000-0x00000000961ba000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x00000000961ba000-0x00000000961bb000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000961bb000-0x00000000961bc000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x00000000961bc000-0x00000000961bf000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000961bf000-0x00000000963a8000) (1MB)
    [ 0.000000] efi: mem26: type=1, attr=0xf, range=[0x00000000963a8000-0x00000000963bf000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000963bf000-0x000000009704f000) (12MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000009704f000-0x0000000097050000) (0MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x0000000097050000-0x00000000970d5000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000970d5000-0x00000000970ef000) (0MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000970ef000-0x00000000970f0000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000970f0000-0x0000000097948000) (8MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x0000000097948000-0x0000000097ac8000) (1MB)
    [ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000097ac8000-0x0000000097fbd000) (4MB)
    [ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x0000000097fbd000-0x0000000097fbf000) (0MB)
    [ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x0000000097fbf000-0x0000000097fce000) (0MB)
    [ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x0000000097fce000-0x0000000097fcf000) (0MB)
    [ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x0000000097fcf000-0x0000000097fd0000) (0MB)
    [ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x0000000097fd0000-0x0000000097fd1000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x0000000097fd1000-0x0000000097ffc000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000097ffc000-0x0000000097ffe000) (0MB)
    [ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x0000000097ffe000-0x0000000098127000) (1MB)
    [ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000098127000-0x000000009812b000) (0MB)
    [ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x000000009812b000-0x000000009812f000) (0MB)
    [ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x000000009812f000-0x0000000098130000) (0MB)
    [ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x0000000098130000-0x0000000098300000) (1MB)
    [ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x0000000098300000-0x0000000098301000) (0MB)
    [ 0.000000] efi: mem48: type=4, attr=0xf, range=[0x0000000098301000-0x000000009856e000) (2MB)
    [ 0.000000] efi: mem49: type=7, attr=0xf, range=[0x000000009856e000-0x000000009856f000) (0MB)
    [ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x000000009856f000-0x0000000098584000) (0MB)
    [ 0.000000] efi: mem51: type=7, attr=0xf, range=[0x0000000098584000-0x0000000098588000) (0MB)
    [ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x0000000098588000-0x000000009a3bf000) (30MB)
    [ 0.000000] efi: mem53: type=7, attr=0xf, range=[0x000000009a3bf000-0x000000009a402000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x000000009a402000-0x000000009a7bf000) (3MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x000000009a7bf000-0x000000009a920000) (1MB)
    [ 0.000000] efi: mem56: type=6, attr=0x800000000000000f, range=[0x000000009a920000-0x000000009a937000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x000000009a937000-0x000000009a9bf000) (0MB)
    [ 0.000000] efi: mem58: type=6, attr=0x800000000000000f, range=[0x000000009a9bf000-0x000000009aabf000) (1MB)
    [ 0.000000] efi: mem59: type=0, attr=0xf, range=[0x000000009aabf000-0x000000009aebf000) (4MB)
    [ 0.000000] efi: mem60: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
    [ 0.000000] efi: mem61: type=9, attr=0xf, range=[0x000000009afbf000-0x000000009afff000) (0MB)
    [ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
    [ 0.000000] efi: mem63: type=7, attr=0xf, range=[0x0000000100000000-0x000000045f600000) (13814MB)
    [ 0.000000] efi: mem64: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem65: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
    [ 0.000000] efi: mem66: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem67: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
    [ 0.000000] efi: mem68: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem69: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
    [ 0.000000] efi: mem70: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem71: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem72: type=11, attr=0x8000000000000000, range=[0x00000000ffb00000-0x0000000100000000) (5MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Alienware M14xR2/M14xR2, BIOS A13 05/17/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 09B000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0FF800000 mask FFF800000 write-protect
    [ 0.000000] 5 base 100000000 mask F00000000 write-back
    [ 0.000000] 6 base 200000000 mask E00000000 write-back
    [ 0.000000] 7 base 400000000 mask F80000000 write-back
    [ 0.000000] 8 base 45F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 base 45F800000 mask FFF800000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
    [ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
    [ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
    [ 0.000000] [mem 0x400000000-0x45bffffff] page 2M
    [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x94daffff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x94bfffff] page 2M
    [ 0.000000] [mem 0x94c00000-0x94daffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x961b0000-0x9a7befff]
    [ 0.000000] [mem 0x961b0000-0x961fffff] page 4k
    [ 0.000000] [mem 0x96200000-0x9a5fffff] page 2M
    [ 0.000000] [mem 0x9a600000-0x9a7befff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x7fdb8000-0x7fffffff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 ALWARE)
    [ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000C4 (v01 ALWARE ALIENWRE 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x000000009AFFA000 00010C (v05 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: DSDT 0x000000009AFEC000 00A06D (v01 ALWARE ALIENWRE 00000000 ASL 00040000)
    [ 0.000000] ACPI: FACS 0x000000009AFB9000 000040
    [ 0.000000] ACPI: SLIC 0x000000009AFFD000 000176 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: UEFI 0x000000009AFFC000 000236 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: ASF! 0x000000009AFFB000 0000A5 (v32 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: HPET 0x000000009AFF9000 000038 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: APIC 0x000000009AFF8000 00008C (v03 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: MCFG 0x000000009AFF7000 00003C (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: SLIC 0x000000009AFEB000 000176 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009AFEA000 0006FE (v01 INSYDE H2O BIOS 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x000000009AFE8000 000028 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009AFE7000 000406 (v01 INSYDE H2O BIOS 00001000 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 0x000000009AFE6000 000034 (v07 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: DBGP 0x000000009AFE5000 000034 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: FPDT 0x000000009AFE3000 000044 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009AFE2000 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
    [ 0.000000] ACPI: SSDT 0x000000009AFE1000 000A92 (v01 PmRef CpuPm 00003000 INTL 20130117)
    [ 0.000000] ACPI: DMAR 0x000000009AFE0000 0000B8 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009AFDB000 002178 (v01 NvdRef NvdTabl 00001000 INTL 20130117)
    [ 0.000000] ACPI: WDTT 0x000000009AFDE000 000224 (v02 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: BGRT 0x000000009AFDF000 000038 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x45f5fffff]
    [ 0.000000] NODE_DATA [mem 0x45f5e9000-0x45f5edfff]
    [ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x94daffff]
    [ 0.000000] node 0: [mem 0x961b0000-0x9a7befff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
    [ 0.000000] On node 0 totalpages: 4163398
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3975 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9735 pages used for memmap
    [ 0.000000] DMA32 zone: 623039 pages, LIFO batch:31
    [ 0.000000] Normal zone: 55256 pages used for memmap
    [ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0x9ba00000-0x9f9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x93c20000-0x93c20fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x93c2b000-0x93c2bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x93c2c000-0x93c2cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x93c3c000-0x93c3cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x93c3d000-0x93c3dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x93c52000-0x93c52fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x94db0000-0x961affff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a7bf000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88045f200000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4098321
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sdb2 rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16237784K/16653592K available (5335K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 415808K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty12] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2693.720 MHz processor
    [ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.91 BogoMIPS (lpj=8979066)
    [ 0.000034] pid_max: default: 32768 minimum: 301
    [ 0.000040] ACPI: Core revision 20140424
    [ 0.007424] ACPI: All ACPI Tables successfully acquired
    [ 0.034086] Security Framework initialized
    [ 0.034092] Yama: becoming mindful.
    [ 0.034940] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.038546] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.040158] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.040173] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.040414] Initializing cgroup subsys memory
    [ 0.040431] Initializing cgroup subsys devices
    [ 0.040437] Initializing cgroup subsys freezer
    [ 0.040439] Initializing cgroup subsys net_cls
    [ 0.040442] Initializing cgroup subsys blkio
    [ 0.040463] CPU: Physical Processor ID: 0
    [ 0.040464] CPU: Processor Core ID: 0
    [ 0.040468] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.040797] mce: CPU supports 9 MCE banks
    [ 0.040809] CPU0: Thermal monitoring enabled (TM1)
    [ 0.040817] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.040916] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.043439] ftrace: allocating 20438 entries in 80 pages
    [ 0.051939] dmar: Host address width 36
    [ 0.051940] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.051946] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.051947] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.051952] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.051953] dmar: RMRR base: 0x0000009ae8c000 end: 0x0000009aeabfff
    [ 0.051954] dmar: RMRR base: 0x0000009b800000 end: 0x0000009f9fffff
    [ 0.052026] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.052027] HPET id 0 under DRHD base 0xfed91000
    [ 0.052028] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.052157] Enabled IRQ remapping in x2apic mode
    [ 0.052158] Enabling x2apic
    [ 0.052159] Enabled x2apic
    [ 0.052166] Switched APIC routing to cluster x2apic.
    [ 0.052613] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.085604] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.085613] TSC deadline timer enabled
    [ 0.085633] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.085650] ... version: 3
    [ 0.085651] ... bit width: 48
    [ 0.085652] ... generic registers: 4
    [ 0.085652] ... value mask: 0000ffffffffffff
    [ 0.085653] ... max period: 0000ffffffffffff
    [ 0.085654] ... fixed-purpose events: 3
    [ 0.085655] ... event mask: 000000070000000f
    [ 0.109048] x86: Booting SMP configuration:
    [ 0.109049] .... node #0, CPUs: #1
    [ 0.122617] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.129294] #2 #3 #4 #5 #6 #7
    [ 0.243753] x86: Booted up 1 node, 8 CPUs
    [ 0.243755] smpboot: Total of 8 processors activated (43116.33 BogoMIPS)
    [ 0.250363] devtmpfs: initialized
    [ 0.253303] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.254065] pinctrl core: initialized pinctrl subsystem
    [ 0.254106] RTC time: 0:43:41, date: 09/20/14
    [ 0.254150] NET: Registered protocol family 16
    [ 0.254247] cpuidle: using governor ladder
    [ 0.254249] cpuidle: using governor menu
    [ 0.254300] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.254301] ACPI: bus type PCI registered
    [ 0.254303] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.254369] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.254371] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.254629] PCI: Using configuration type 1 for base access
    [ 0.267172] ACPI: Added _OSI(Module Device)
    [ 0.267174] ACPI: Added _OSI(Processor Device)
    [ 0.267175] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.267176] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.269800] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.280605] ACPI: Dynamic OEM Table Load:
    [ 0.280615] ACPI: SSDT 0xFFFF8804489D0000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
    [ 0.303749] ACPI: Dynamic OEM Table Load:
    [ 0.303758] ACPI: SSDT 0xFFFF880448A81000 000303 (v01 PmRef ApIst 00003000 INTL 20130117)
    [ 0.316969] ACPI: Dynamic OEM Table Load:
    [ 0.316978] ACPI: SSDT 0xFFFF8804485D0000 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
    [ 0.331327] ACPI: Interpreter enabled
    [ 0.331333] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.331337] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.331349] ACPI: (supports S0 S3 S4 S5)
    [ 0.331350] ACPI: Using IOAPIC for interrupt routing
    [ 0.331373] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.473597] ACPI: Power Resource [FN00] (off)
    [ 0.473663] ACPI: Power Resource [FN01] (off)
    [ 0.473727] ACPI: Power Resource [FN02] (off)
    [ 0.473789] ACPI: Power Resource [FN03] (off)
    [ 0.473852] ACPI: Power Resource [FN04] (off)
    [ 0.474268] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.474272] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.474377] \_SB_.PCI0:_OSC invalid UUID
    [ 0.474378] _OSC request data:1 1f 0
    [ 0.474381] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.474744] PCI host bridge to bus 0000:00
    [ 0.474747] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.474748] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.474750] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.474751] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.474753] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.474754] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.474755] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.474757] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.474758] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.474759] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.474761] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.474762] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.474763] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.474764] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.474766] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.474767] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.474768] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.474770] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.474777] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.474861] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.474890] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.474929] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.474969] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.474979] pci 0000:00:02.0: reg 0x10: [mem 0xd2000000-0xd23fffff 64bit]
    [ 0.474985] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.474990] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
    [ 0.475087] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.475109] pci 0000:00:14.0: reg 0x10: [mem 0xd2700000-0xd270ffff 64bit]
    [ 0.475178] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.475231] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.475269] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.475289] pci 0000:00:16.0: reg 0x10: [mem 0xd2714000-0xd271400f 64bit]
    [ 0.475352] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.475436] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.475457] pci 0000:00:1a.0: reg 0x10: [mem 0xd2719000-0xd27193ff]
    [ 0.475544] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.475596] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.475636] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.475652] pci 0000:00:1b.0: reg 0x10: [mem 0xd2710000-0xd2713fff 64bit]
    [ 0.475725] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.475767] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.475804] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.475890] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.475935] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.475972] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 0.476057] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.476101] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.476138] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 0.476224] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.476269] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.476312] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.476333] pci 0000:00:1d.0: reg 0x10: [mem 0xd2718000-0xd27183ff]
    [ 0.476421] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.476472] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.476511] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 0.476680] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.476698] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
    [ 0.476706] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
    [ 0.476714] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
    [ 0.476722] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
    [ 0.476730] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
    [ 0.476738] pci 0000:00:1f.2: reg 0x24: [mem 0xd2717000-0xd27177ff]
    [ 0.476781] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.476850] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.476865] pci 0000:00:1f.3: reg 0x10: [mem 0xd2715000-0xd27150ff 64bit]
    [ 0.476886] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
    [ 0.477005] pci 0000:01:00.0: [10de:0fd1] type 00 class 0x030000
    [ 0.477012] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
    [ 0.477019] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.477026] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 0.477030] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
    [ 0.477035] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.477082] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.477114] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
    [ 0.477121] pci 0000:01:00.1: reg 0x10: [mem 0xd1000000-0xd1003fff]
    [ 0.483586] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 0.483591] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.483596] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.483602] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.483853] pci 0000:07:00.0: [1969:1083] type 00 class 0x020000
    [ 0.484038] pci 0000:07:00.0: reg 0x10: [mem 0xd2600000-0xd263ffff 64bit]
    [ 0.484119] pci 0000:07:00.0: reg 0x18: [io 0x2000-0x207f]
    [ 0.484895] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.485051] pci 0000:07:00.0: System wakeup disabled by ACPI
    [ 0.490314] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.490318] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.490322] pci 0000:00:1c.0: bridge window [mem 0xd2600000-0xd26fffff]
    [ 0.490427] pci 0000:08:00.0: [168c:0034] type 00 class 0x028000
    [ 0.490469] pci 0000:08:00.0: reg 0x10: [mem 0xd2500000-0xd257ffff 64bit]
    [ 0.490552] pci 0000:08:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.490668] pci 0000:08:00.0: supports D1
    [ 0.490669] pci 0000:08:00.0: PME# supported from D0 D1 D3hot
    [ 0.490717] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 0.496937] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.496950] pci 0000:00:1c.2: bridge window [mem 0xd2500000-0xd25fffff]
    [ 0.497067] pci 0000:09:00.0: [10ec:5209] type 00 class 0xff0000
    [ 0.497095] pci 0000:09:00.0: reg 0x10: [mem 0xd2401000-0xd2401fff]
    [ 0.497264] pci 0000:09:00.0: supports D1 D2
    [ 0.497265] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
    [ 0.497305] pci 0000:09:00.0: System wakeup disabled by ACPI
    [ 0.497361] pci 0000:09:00.1: [10ec:5209] type 00 class 0x080500
    [ 0.497391] pci 0000:09:00.1: reg 0x10: [mem 0xd2400000-0xd24000ff]
    [ 0.497565] pci 0000:09:00.1: supports D1 D2
    [ 0.497566] pci 0000:09:00.1: PME# supported from D1 D2 D3hot
    [ 0.503641] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.503648] pci 0000:00:1c.3: bridge window [mem 0xd2400000-0xd24fffff]
    [ 0.573821] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.573865] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.573905] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.573944] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.573984] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.574023] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.574064] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.574104] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.574367] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 0.574394] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.574479] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.574483] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.574484] vgaarb: loaded
    [ 0.574485] vgaarb: bridge control possible 0000:01:00.0
    [ 0.574486] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.574552] PCI: Using ACPI for IRQ routing
    [ 0.580641] PCI: pci_cache_line_size set to 64 bytes
    [ 0.580713] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.580715] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.580716] e820: reserve RAM buffer [mem 0x93c20018-0x93ffffff]
    [ 0.580717] e820: reserve RAM buffer [mem 0x93c2c018-0x93ffffff]
    [ 0.580718] e820: reserve RAM buffer [mem 0x93c3d018-0x93ffffff]
    [ 0.580719] e820: reserve RAM buffer [mem 0x94db0000-0x97ffffff]
    [ 0.580720] e820: reserve RAM buffer [mem 0x9a7bf000-0x9bffffff]
    [ 0.580722] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 0.580723] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
    [ 0.580815] NetLabel: Initializing
    [ 0.580816] NetLabel: domain hash size = 128
    [ 0.580816] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.580826] NetLabel: unlabeled traffic allowed by default
    [ 0.580848] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.580852] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.582876] Switched to clocksource hpet
    [ 0.586892] pnp: PnP ACPI init
    [ 0.586905] ACPI: bus type PNP registered
    [ 0.586996] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.586998] system 00:00: [io 0x1000-0x100f] has been reserved
    [ 0.586999] system 00:00: [io 0xffff] has been reserved
    [ 0.587001] system 00:00: [io 0xffff] has been reserved
    [ 0.587002] system 00:00: [io 0x0400-0x0453] could not be reserved
    [ 0.587004] system 00:00: [io 0x0458-0x047f] has been reserved
    [ 0.587005] system 00:00: [io 0x0500-0x057f] has been reserved
    [ 0.587007] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.587008] system 00:00: [io 0xfd60-0xfd63] has been reserved
    [ 0.587011] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.587040] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.587081] system 00:02: [io 0x0454-0x0457] has been reserved
    [ 0.587083] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.587113] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.587140] pnp 00:04: Plug and Play ACPI device, IDs DLL0552 PNP0f13 (active)
    [ 0.656340] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.656342] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.656343] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.656345] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.656347] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.656348] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.656350] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.656351] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
    [ 0.656353] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
    [ 0.656355] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.656356] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [ 0.656358] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.656562] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.656563] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.656565] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.656583] pnp: PnP ACPI: found 7 devices
    [ 0.656584] ACPI: bus type PNP unregistered
    [ 0.662837] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
    [ 0.662840] pci 0000:08:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.662877] pci 0000:01:00.0: BAR 6: assigned [mem 0xd1080000-0xd10fffff pref]
    [ 0.662880] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 0.662881] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.662884] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
    [ 0.662886] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.662889] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.662892] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.662897] pci 0000:00:1c.0: bridge window [mem 0xd2600000-0xd26fffff]
    [ 0.662906] pci 0000:08:00.0: BAR 6: assigned [mem 0xd2580000-0xd258ffff pref]
    [ 0.662907] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [ 0.662912] pci 0000:00:1c.2: bridge window [mem 0xd2500000-0xd25fffff]
    [ 0.662920] pci 0000:00:1c.3: PCI bridge to [bus 09]
    [ 0.662925] pci 0000:00:1c.3: bridge window [mem 0xd2400000-0xd24fffff]
    [ 0.662934] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.662935] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.662936] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.662938] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.662939] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.662940] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.662942] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.662943] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.662945] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.662946] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.662947] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.662949] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.662950] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.662952] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.662953] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.662954] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    [ 0.662956] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
    [ 0.662957] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.662958] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
    [ 0.662960] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.662961] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
    [ 0.662963] pci_bus 0000:07: resource 1 [mem 0xd2600000-0xd26fffff]
    [ 0.662964] pci_bus 0000:08: resource 1 [mem 0xd2500000-0xd25fffff]
    [ 0.662966] pci_bus 0000:09: resource 1 [mem 0xd2400000-0xd24fffff]
    [ 0.662988] NET: Registered protocol family 2
    [ 0.663183] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.663383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.663493] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.663506] TCP: reno registered
    [ 0.663520] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.663566] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.663632] NET: Registered protocol family 1
    [ 0.663644] pci 0000:00:02.0: Boot video device
    [ 0.689654] PCI: CLS 64 bytes, default 64
    [ 0.689692] Unpacking initramfs...
    [ 0.723845] Freeing initrd memory: 2336K (ffff88007fdb8000 - ffff880080000000)
    [ 0.723868] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.723870] software IO TLB [mem 0x8f1c0000-0x931c0000] (64MB) mapped at [ffff88008f1c0000-ffff8800931bffff]
    [ 0.723910] Simple Boot Flag at 0x44 set to 0x1
    [ 0.724196] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.724240] Scanning for low memory corruption every 60 seconds
    [ 0.724480] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.724825] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.725899] zbud: loaded
    [ 0.726031] VFS: Disk quotas dquot_6.5.2
    [ 0.726059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.726153] msgmni has been set to 31860
    [ 0.726214] Key type big_key registered
    [ 0.726355] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.726414] io scheduler noop registered
    [ 0.726417] io scheduler deadline registered
    [ 0.726456] io scheduler cfq registered (default)
    [ 0.726499] pcieport 0000:00:01.0: device [8086:0151] has invalid IRQ; check vendor BIOS
    [ 0.726594] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 0.726629] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
    [ 0.726729] pcieport 0000:00:1c.2: device [8086:1e14] has invalid IRQ; check vendor BIOS
    [ 0.726825] pcieport 0000:00:1c.3: device [8086:1e16] has invalid IRQ; check vendor BIOS
    [ 0.726942] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.726956] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.726986] efifb: probing for efifb
    [ 0.726999] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 5628k, total 5625k
    [ 0.727001] efifb: mode is 1600x900x32, linelength=6400, pages=1
    [ 0.727001] efifb: scrolling: redraw
    [ 0.727003] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.729864] Console: switching to colour frame buffer device 200x56
    [ 0.732642] fb0: EFI VGA frame buffer device
    [ 0.732649] intel_idle: MWAIT substates: 0x21120
    [ 0.732650] intel_idle: v0.4 model 0x3A
    [ 0.732651] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.732928] GHES: HEST is not enabled!
    [ 0.732997] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.733363] Linux agpgart interface v0.103
    [ 0.733418] rtc_cmos 00:01: RTC can wake from S4
    [ 0.733535] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.733564] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.733573] Intel P-state driver initializing.
    [ 0.733586] Intel pstate controlling: cpu 0
    [ 0.733604] Intel pstate controlling: cpu 1
    [ 0.733616] Intel pstate controlling: cpu 2
    [ 0.733632] Intel pstate controlling: cpu 3
    [ 0.733648] Intel pstate controlling: cpu 4
    [ 0.733663] Intel pstate controlling: cpu 5
    [ 0.733678] Intel pstate controlling: cpu 6
    [ 0.733692] Intel pstate controlling: cpu 7
    [ 0.733750] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.733948] TCP: cubic registered
    [ 0.734122] NET: Registered protocol family 10
    [ 0.734474] NET: Registered protocol family 17
    [ 0.735087] registered taskstats version 1
    [ 0.735984] Magic number: 14:202:709
    [ 0.736117] rtc_cmos 00:01: setting system clock to 2014-09-20 00:43:41 UTC (1411173821)
    [ 0.736295] PM: Hibernation image not present or could not be loaded.
    [ 0.737810] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.737812] Write protecting the kernel read-only data: 8192k
    [ 0.741440] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
    [ 0.743068] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.752006] SCSI subsystem initialized
    [ 0.752923] libata version 3.00 loaded.
    [ 0.753507] ahci 0000:00:1f.2: version 3.0
    [ 0.769637] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.782849] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
    [ 0.782851] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 0.796550] scsi0 : ahci
    [ 0.796691] scsi1 : ahci
    [ 0.796832] scsi2 : ahci
    [ 0.796991] scsi3 : ahci
    [ 0.797071] scsi4 : ahci
    [ 0.797142] scsi5 : ahci
    [ 0.797168] ata1: SATA max UDMA/133 abar m2048@0xd2717000 port 0xd2717100 irq 43
    [ 0.797170] ata2: SATA max UDMA/133 abar m2048@0xd2717000 port 0xd2717180 irq 43
    [ 0.797173] ata3: SATA max UDMA/133 abar m2048@0xd2717000 port 0xd2717200 irq 43
    [ 0.797173] ata4: DUMMY
    [ 0.797174] ata5: DUMMY
    [ 0.797175] ata6: DUMMY
    [ 1.116081] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.116099] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.116118] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.116564] ata2.00: ATA-8: SAMSUNG SSD PM830 mSATA 64GB, CXM12D1Q, max UDMA/133
    [ 1.116566] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.116843] ata2.00: configured for UDMA/133
    [ 1.142919] ata3.00: ATAPI: MATSHITA DVDRW/BDROM UJ167, 1.01, max UDMA/133
    [ 1.143096] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1.143451] ata1.00: ATA-8: WDC WD10JPVT-75A1YT0, 01.01A01, max UDMA/133
    [ 1.143457] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.144753] ata3.00: configured for UDMA/133
    [ 1.145411] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1.145753] ata1.00: configured for UDMA/133
    [ 1.149651] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVT-75A 1A01 PQ: 0 ANSI: 5
    [ 1.150133] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 2D1Q PQ: 0 ANSI: 5
    [ 1.151825] scsi 2:0:0:0: CD-ROM MATSHITA DVDRWBD UJ167 1.01 PQ: 0 ANSI: 5
    [ 1.162395] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.162398] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.162411] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 1.162431] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.162433] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.162446] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.162451] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.162453] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.162466] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.163880] sdb: sdb1 sdb2
    [ 1.164047] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.246104] sda: sda1
    [ 1.246328] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.274217] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.333361] random: systemd urandom read with 45 bits of entropy available
    [ 1.388780] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 1.535845] EXT4-fs (sdb2): re-mounted. Opts: data=ordered,discard
    [ 1.550718] systemd-udevd[157]: starting version 216
    [ 1.597289] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
    [ 1.597293] ACPI: Power Button [PWRB]
    [ 1.597368] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 1.597402] ACPI: Lid Switch [LID0]
    [ 1.597452] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 1.597455] ACPI: Power Button [PWRF]
    [ 1.599850] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
    [ 1.599855] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.599857] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
    [ 1.599860] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
    [ 1.599862] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.599863] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
    [ 1.599864] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
    [ 1.599866] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.599867] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
    [ 1.599868] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
    [ 1.599870] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.599871] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.600569] ACPI: AC Adapter [ACAD] (on-line)
    [ 1.602071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.604034] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.613948] ACPI: bus type USB registered
    [ 1.613992] usbcore: registered new interface driver usbfs
    [ 1.614011] usbcore: registered new interface driver hub
    [ 1.614131] wmi: Mapper loaded
    [ 1.615939] usbcore: registered new device driver usb
    [ 1.640940] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.640943] ACPI: Thermal Zone [TZ00] (28 C)
    [ 1.641194] thermal LNXTHERM:01: registered as thermal_zone1
    [ 1.641196] ACPI: Thermal Zone [TZ01] (30 C)
    [ 1.645928] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.645971] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.646159] ACPI: Fan [FAN0] (off)
    [ 1.646199] ACPI: Fan [FAN1] (off)
    [ 1.646232] ACPI: Fan [FAN2] (off)
    [ 1.646256] ACPI: Fan [FAN3] (off)
    [ 1.646279] ACPI: Fan [FAN4] (off)
    [ 1.646630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.646745] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 1.646901] rtsx_pci 0000:09:00.0: irq 45 for MSI/MSI-X
    [ 1.646917] rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
    [ 1.647155] ehci-pci: EHCI PCI platform driver
    [ 1.648773] sdhci: Secure Digital Host Controller Interface driver
    [ 1.648775] sdhci: Copyright(c) Pierre Ossman
    [ 1.649728] sdhci-pci 0000:09:00.1: SDHCI controller found [10ec:5209] (rev 1)
    [ 1.649798] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 1.649803] mmc0: no vqmmc regulator found
    [ 1.649804] mmc0: no vmmc regulator found
    [ 1.649811] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 1.650165] mmc0: SDHCI controller on PCI [0000:09:00.1] using DMA
    [ 1.651567] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 1.651573] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.653633] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.653644] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 1.653741] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.653767] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
    [ 1.654200] hub 1-0:1.0: USB hub found
    [ 1.654216] hub 1-0:1.0: 4 ports detected
    [ 1.654611] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.654615] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 1.654756] hub 2-0:1.0: USB hub found
    [ 1.654765] hub 2-0:1.0: 4 ports detected
    [ 1.655998] [drm] Initialized drm 1.1.0 20060810
    [ 1.656260] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.656267] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.656282] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.657574] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.657686] input: PC Speaker as /devices/platform/pcspkr/input/input3
    [ 1.658698] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.658712] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.658722] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.658729] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.658740] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.658754] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.658767] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
    [ 1.658821] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.660185] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.660199] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd2719000
    [ 1.662305] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.667434] AVX version of gcm_enc/dec engaged.
    [ 1.667771] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    [ 1.667774] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.668108] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.669319] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.669496] hub 3-0:1.0: USB hub found
    [ 1.669504] hub 3-0:1.0: 2 ports detected
    [ 1.669754] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.669759] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 1.669770] ehci-pci 0000:00:1d.0:

  • When resuming from standby mouse-click/keyboard doesn't work.

    When resuming from standby about 80% of the time the mouse on my Macbook Pro (Early 2011) stops working. I think it is a software issue. It appears that the mouse will do a click or click and drag but will not let go when removing my fingers. The issue only happens within 5seconds of waking up. The issue is only fixed with a hard reboot. I can bring up the shutdown menu, but am unable to slect shut down as the mouse/keyboard won't give input. This issue was present in Lion and was gone for the first few months of Mavericks but appeared again this week.
    I can freely move around the mouse cursor and enter expose with three fingers but cannot select anything.
    Any help would be appreciated.
    Thanks.

    You can use viewToModel() method to get caret position for x, y location. No need to click.
    Regards,
    Stas

  • USB Mouse / Keyboard doesn't work after resuming from hibernate

    I am using a USB device that splits out to 2 PS2 ports, one for a mouse, one for a keyboard. It works great, but when I put my X61 into hibernate, the mouse and keyboard do not work when I resume from hibernate.
    I installed all the relevant patches and power manager drivers from the driver downloads page, but my mouse still doesn't work.
    Can someone point me to the correct download or shed some light on this?
    Thank you!

    I have this same problem with this same device. It is a "composite USB device".
    What I've notice is that the problem happens mostly with USB 1.1 ports. When the device is connected to a USB 2.0 port the problem doesn't happen always.
    It depends on the computer though. I added a PCMCIA USB 2.0 adaptor to my laptop that has USB 1.1 only. And when I connect the USB-to-PS/2 cable to the USB 2.0 my mouse sometimes work after suspend/hibernate but sometimes doesn't.
    However, on my other desktop computer, which has integrated USB 2.0 ports, this problem has never happened (I haven't tested it exhaustively though).
    This is a Windows bug of course. Everything related to USB 1.1 support is buggy in Windows. One more example is the annoying (and possibly catastrophic) "Delayed write error" that appears when you use a external hard drive plugged to a USB 1.1 port.
    I guess M$ is focusing their efforts on making USB 2.0 to work well and they have forgotten about USB 1.1. Or it could a problem related to "USB composite devices", hard to know.
    Message Edited by getfree on 02-22-2009 03:19 PM

  • Keyboard-mouse locked after resume from suspend

    After the last couple of system updates my system no longer resumes properly from suspend. The video is fine but the keyboard-mouse combo is locked up.
    The kb-mouse combo is a logitech wireless:
    Bus 001 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
    I can see no relevant log details in systemctl that lead me anywhere. Any ideas appreciated.

    I don't know if this is the same bug. I'm using openbox and a desktop computer without any touchpad. After being suspended, my mouse somehow rules all of my desktop - whole screen is flattering, and moving mouse changes the size of the visible, flashing window. Moving cursor to the top of the screen "locks" the window, and everything except mouse cursor is perfectly normal. Cursor is waving and flashing bunch of pixels, from the right side of the screen to the current location of the mouse cursor. I can use the mouse, and cursor is in right location. Ctrl+Alt+F2 visiting to tty2 and coming back fixes the situation, so I can use computer just fine, but it's still quite uncomfortable. Sounds quite strange, I think?

  • Keyboard Very Glitchy + Speakers Clicking After Resume From Suspend

    Hello,
    Didn't know exactly where to post this, so I chose newbie.  I have a very strange issue regarding suspending and resuming on my Arch64 box.  When I resume from a suspend, everything seems to work okay, however first I hear this from my speakers:
    *pop* [pause] *pop*
    And then, when I use the keyboard, it responds very strangely.  Every key still types what it should, but letters will be frequently either skipped over to carried out longer. 
    Here's a good example:
    If I type this before a suspend: "Arch Linux rules!"
    It may come out like this after the suspend: "ArcLinux ruuuuuuuuul!"
    See what's happening? 
    So when this happens I must reboot, and then it works fine again.
    My machine is an HP Pavilion DV7 6199us running on Intel graphics (sna acceleration) with the Radeon card disabled with acpi_call.
    Xorg.0.log:
    [ 2493.450]
    X.Org X Server 1.12.3
    Release Date: 2012-07-09
    [ 2493.450] X Protocol Version 11, Revision 0
    [ 2493.450] Build Operating System: Linux 3.4.4-3-ARCH x86_64
    [ 2493.450] Current Operating System: Linux alex-archlinux 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
    [ 2493.450] Kernel command line: root=/dev/disk/by-uuid/579476a1-f5d2-432b-b2f7-d543e65c579b modprobe.blacklist=radeon ro acpi_osi=Linux acpi_backlight=vendor
    [ 2493.450] Build Date: 09 July 2012 03:59:39PM
    [ 2493.450]
    [ 2493.450] Current version of pixman: 0.26.2
    [ 2493.450] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2493.450] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2493.451] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 25 22:56:28 2012
    [ 2493.451] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2493.451] (==) No Layout section. Using the first Screen section.
    [ 2493.451] (==) No screen section available. Using defaults.
    [ 2493.451] (**) |-->Screen "Default Screen Section" (0)
    [ 2493.451] (**) | |-->Monitor "<default monitor>"
    [ 2493.451] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 2493.452] (**) | |-->Device "Intel Graphics"
    [ 2493.452] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2493.452] (==) Automatically adding devices
    [ 2493.452] (==) Automatically enabling devices
    [ 2493.452] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2493.452] Entry deleted from font path.
    [ 2493.452] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2493.452] Entry deleted from font path.
    [ 2493.452] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2493.452] Entry deleted from font path.
    [ 2493.452] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2493.452] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2493.452] Entry deleted from font path.
    [ 2493.452] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2493.452] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 2493.452] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2493.452] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2493.452] (II) Loader magic: 0x7c8b00
    [ 2493.452] (II) Module ABI versions:
    [ 2493.452] X.Org ANSI C Emulation: 0.4
    [ 2493.452] X.Org Video Driver: 12.0
    [ 2493.452] X.Org XInput driver : 16.0
    [ 2493.452] X.Org Server Extension : 6.0
    [ 2493.454] (--) PCI:*(0:0:2:0) 8086:0116:103c:3389 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
    [ 2493.454] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2493.454] (II) LoadModule: "extmod"
    [ 2493.454] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2493.454] (II) Module extmod: vendor="X.Org Foundation"
    [ 2493.454] compiled for 1.12.3, module version = 1.0.0
    [ 2493.454] Module class: X.Org Server Extension
    [ 2493.454] ABI class: X.Org Server Extension, version 6.0
    [ 2493.454] (II) Loading extension MIT-SCREEN-SAVER
    [ 2493.454] (II) Loading extension XFree86-VidModeExtension
    [ 2493.454] (II) Loading extension XFree86-DGA
    [ 2493.454] (II) Loading extension DPMS
    [ 2493.454] (II) Loading extension XVideo
    [ 2493.454] (II) Loading extension XVideo-MotionCompensation
    [ 2493.455] (II) Loading extension X-Resource
    [ 2493.455] (II) LoadModule: "dbe"
    [ 2493.455] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2493.455] (II) Module dbe: vendor="X.Org Foundation"
    [ 2493.455] compiled for 1.12.3, module version = 1.0.0
    [ 2493.455] Module class: X.Org Server Extension
    [ 2493.455] ABI class: X.Org Server Extension, version 6.0
    [ 2493.455] (II) Loading extension DOUBLE-BUFFER
    [ 2493.455] (II) LoadModule: "glx"
    [ 2493.455] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2493.455] (II) Module glx: vendor="X.Org Foundation"
    [ 2493.455] compiled for 1.12.3, module version = 1.0.0
    [ 2493.455] ABI class: X.Org Server Extension, version 6.0
    [ 2493.455] (==) AIGLX enabled
    [ 2493.455] (II) Loading extension GLX
    [ 2493.455] (II) LoadModule: "record"
    [ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2493.456] (II) Module record: vendor="X.Org Foundation"
    [ 2493.456] compiled for 1.12.3, module version = 1.13.0
    [ 2493.456] Module class: X.Org Server Extension
    [ 2493.456] ABI class: X.Org Server Extension, version 6.0
    [ 2493.456] (II) Loading extension RECORD
    [ 2493.456] (II) LoadModule: "dri"
    [ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2493.456] (II) Module dri: vendor="X.Org Foundation"
    [ 2493.456] compiled for 1.12.3, module version = 1.0.0
    [ 2493.456] ABI class: X.Org Server Extension, version 6.0
    [ 2493.456] (II) Loading extension XFree86-DRI
    [ 2493.456] (II) LoadModule: "dri2"
    [ 2493.456] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2493.456] (II) Module dri2: vendor="X.Org Foundation"
    [ 2493.456] compiled for 1.12.3, module version = 1.2.0
    [ 2493.456] ABI class: X.Org Server Extension, version 6.0
    [ 2493.456] (II) Loading extension DRI2
    [ 2493.456] (II) LoadModule: "intel"
    [ 2493.456] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2493.456] (II) Module intel: vendor="X.Org Foundation"
    [ 2493.456] compiled for 1.12.3, module version = 2.20.1
    [ 2493.456] Module class: X.Org Video Driver
    [ 2493.456] ABI class: X.Org Video Driver, version 12.0
    [ 2493.456] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2)
    [ 2493.457] (++) using VT number 8
    [ 2493.463] drmOpenDevice: node name is /dev/dri/card0
    [ 2493.463] drmOpenDevice: open result is 8, (OK)
    [ 2493.463] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 2493.463] drmOpenDevice: node name is /dev/dri/card0
    [ 2493.463] drmOpenDevice: open result is 8, (OK)
    [ 2493.463] drmOpenByBusid: drmOpenMinor returns 8
    [ 2493.463] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 2493.463] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2493.463] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 2493.463] (==) intel(0): RGB weight 888
    [ 2493.463] (==) intel(0): Default visual is TrueColor
    [ 2493.463] (**) intel(0): Option "AccelMethod" "sna"
    [ 2493.463] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
    [ 2493.463] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
    [ 2493.464] (**) intel(0): Framebuffer tiled
    [ 2493.464] (**) intel(0): Pixmaps tiled
    [ 2493.464] (**) intel(0): 3D buffers tiled
    [ 2493.464] (**) intel(0): Throttling enabled
    [ 2493.464] (**) intel(0): Delayed flush enabled
    [ 2493.464] (**) intel(0): "Tear free" disabled
    [ 2493.464] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 2493.464] (II) intel(0): Output LVDS1 has no monitor section
    [ 2493.465] (II) intel(0): found backlight control interface intel_backlight (type 'raw')
    [ 2493.465] (II) intel(0): Output VGA1 has no monitor section
    [ 2493.466] (II) intel(0): Output HDMI1 has no monitor section
    [ 2493.506] (II) intel(0): Output DP1 has no monitor section
    [ 2493.506] (II) intel(0): EDID for output LVDS1
    [ 2493.506] (II) intel(0): Manufacturer: AUO Model: 139e Serial#: 0
    [ 2493.506] (II) intel(0): Year: 2009 Week: 1
    [ 2493.506] (II) intel(0): EDID Version: 1.3
    [ 2493.506] (II) intel(0): Digital Display Input
    [ 2493.506] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 21
    [ 2493.506] (II) intel(0): Gamma: 2.20
    [ 2493.506] (II) intel(0): No DPMS capabilities specified
    [ 2493.506] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 2493.506] (II) intel(0): First detailed timing is preferred mode
    [ 2493.506] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.325 greenY: 0.570
    [ 2493.506] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 2493.506] (II) intel(0): Manufacturer's mask: 0
    [ 2493.506] (II) intel(0): Supported detailed timing:
    [ 2493.506] (II) intel(0): clock: 107.8 MHz Image Size: 382 x 214 mm
    [ 2493.506] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1966 h_border: 0
    [ 2493.506] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 912 v_border: 0
    [ 2493.506] (II) intel(0): Unknown vendor-specific block f
    [ 2493.506] (II) intel(0): AUO
    [ 2493.506] (II) intel(0): B173RW01 V3
    [ 2493.506] (II) intel(0): EDID (in hex):
    [ 2493.506] (II) intel(0): 00ffffffffffff0006af9e1300000000
    [ 2493.506] (II) intel(0): 01130103802615780ac4959e57539226
    [ 2493.506] (II) intel(0): 0f505400000001010101010101010101
    [ 2493.506] (II) intel(0): 0101010101011c2a406e61840c303020
    [ 2493.506] (II) intel(0): 36007ed6100000180000000f00000000
    [ 2493.506] (II) intel(0): 00000000000000000020000000fe0041
    [ 2493.506] (II) intel(0): 554f0a202020202020202020000000fe
    [ 2493.506] (II) intel(0): 004231373352573031205633200a0024
    [ 2493.506] (II) intel(0): EDID vendor "AUO", prod id 5022
    [ 2493.506] (II) intel(0): Printing DDC gathered Modelines:
    [ 2493.506] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
    [ 2493.507] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 2493.507] (II) intel(0): Printing probed modes for output LVDS1
    [ 2493.507] (II) intel(0): Modeline "1600x900"x60.1 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
    [ 2493.507] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 2493.507] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 2493.507] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 2493.507] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 2493.507] (II) intel(0): EDID for output VGA1
    [ 2493.507] (II) intel(0): EDID for output HDMI1
    [ 2493.549] (II) intel(0): EDID for output DP1
    [ 2493.550] (II) intel(0): Output LVDS1 connected
    [ 2493.550] (II) intel(0): Output VGA1 disconnected
    [ 2493.550] (II) intel(0): Output HDMI1 disconnected
    [ 2493.550] (II) intel(0): Output DP1 disconnected
    [ 2493.550] (II) intel(0): Using exact sizes for initial modes
    [ 2493.550] (II) intel(0): Output LVDS1 using initial mode 1600x900
    [ 2493.550] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2493.550] (**) intel(0): Display dimensions: (380, 210) mm
    [ 2493.550] (**) intel(0): DPI set to (106, 108)
    [ 2493.550] (II) Loading sub module "dri2"
    [ 2493.550] (II) LoadModule: "dri2"
    [ 2493.550] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2493.550] (II) Module dri2: vendor="X.Org Foundation"
    [ 2493.550] compiled for 1.12.3, module version = 1.2.0
    [ 2493.550] ABI class: X.Org Server Extension, version 6.0
    [ 2493.550] (==) Depth 24 pixmap format is 32 bpp
    [ 2493.551] (II) intel(0): SNA initialized with SandyBridge backend
    [ 2493.551] (==) intel(0): Backing store disabled
    [ 2493.551] (==) intel(0): Silken mouse enabled
    [ 2493.551] (II) intel(0): HW Cursor enabled
    [ 2493.551] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2493.551] (==) intel(0): DPMS enabled
    [ 2493.551] (II) intel(0): [DRI2] Setup complete
    [ 2493.551] (II) intel(0): [DRI2] DRI driver: i965
    [ 2493.552] (II) intel(0): direct rendering: DRI2 Enabled
    [ 2493.552] (==) intel(0): hotplug detection: "enabled"
    [ 2493.552] (--) RandR disabled
    [ 2493.552] (II) Initializing built-in extension Generic Event Extension
    [ 2493.552] (II) Initializing built-in extension SHAPE
    [ 2493.552] (II) Initializing built-in extension MIT-SHM
    [ 2493.552] (II) Initializing built-in extension XInputExtension
    [ 2493.552] (II) Initializing built-in extension XTEST
    [ 2493.552] (II) Initializing built-in extension BIG-REQUESTS
    [ 2493.552] (II) Initializing built-in extension SYNC
    [ 2493.552] (II) Initializing built-in extension XKEYBOARD
    [ 2493.552] (II) Initializing built-in extension XC-MISC
    [ 2493.552] (II) Initializing built-in extension SECURITY
    [ 2493.552] (II) Initializing built-in extension XINERAMA
    [ 2493.552] (II) Initializing built-in extension XFIXES
    [ 2493.552] (II) Initializing built-in extension RENDER
    [ 2493.552] (II) Initializing built-in extension RANDR
    [ 2493.552] (II) Initializing built-in extension COMPOSITE
    [ 2493.552] (II) Initializing built-in extension DAMAGE
    [ 2493.560] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 2493.560] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 2493.560] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 2493.560] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 2493.560] (II) AIGLX: Loaded and initialized i965
    [ 2493.560] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 2493.561] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
    [ 2493.620] (II) intel(0): Setting screen physical size to 423 x 238
    [ 2493.658] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 2493.658] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2493.658] (II) LoadModule: "evdev"
    [ 2493.658] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2493.659] (II) Module evdev: vendor="X.Org Foundation"
    [ 2493.659] compiled for 1.12.3, module version = 2.7.1
    [ 2493.659] Module class: X.Org XInput Driver
    [ 2493.659] ABI class: X.Org XInput driver, version 16.0
    [ 2493.659] (II) Using input driver 'evdev' for 'Power Button'
    [ 2493.659] (**) Power Button: always reports core events
    [ 2493.659] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 2493.659] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2493.659] (--) evdev: Power Button: Found keys
    [ 2493.659] (II) evdev: Power Button: Configuring as keyboard
    [ 2493.659] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 2493.659] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2493.659] (**) Option "xkb_rules" "evdev"
    [ 2493.659] (**) Option "xkb_model" "evdev"
    [ 2493.659] (**) Option "xkb_layout" "us"
    [ 2493.684] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 2493.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2493.684] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2493.684] (**) Video Bus: always reports core events
    [ 2493.684] (**) evdev: Video Bus: Device: "/dev/input/event5"
    [ 2493.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2493.684] (--) evdev: Video Bus: Found keys
    [ 2493.684] (II) evdev: Video Bus: Configuring as keyboard
    [ 2493.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
    [ 2493.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 2493.685] (**) Option "xkb_rules" "evdev"
    [ 2493.685] (**) Option "xkb_model" "evdev"
    [ 2493.685] (**) Option "xkb_layout" "us"
    [ 2493.686] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2493.686] (II) No input driver specified, ignoring this device.
    [ 2493.686] (II) This device may have been added with another device file.
    [ 2493.686] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 2493.686] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2493.686] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2493.686] (**) Video Bus: always reports core events
    [ 2493.686] (**) evdev: Video Bus: Device: "/dev/input/event4"
    [ 2493.686] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2493.686] (--) evdev: Video Bus: Found keys
    [ 2493.686] (II) evdev: Video Bus: Configuring as keyboard
    [ 2493.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input4/event4"
    [ 2493.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 2493.686] (**) Option "xkb_rules" "evdev"
    [ 2493.686] (**) Option "xkb_model" "evdev"
    [ 2493.686] (**) Option "xkb_layout" "us"
    [ 2493.686] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2493.686] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2493.687] (II) Using input driver 'evdev' for 'Power Button'
    [ 2493.687] (**) Power Button: always reports core events
    [ 2493.687] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2493.687] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2493.687] (--) evdev: Power Button: Found keys
    [ 2493.687] (II) evdev: Power Button: Configuring as keyboard
    [ 2493.687] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 2493.687] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 2493.687] (**) Option "xkb_rules" "evdev"
    [ 2493.687] (**) Option "xkb_model" "evdev"
    [ 2493.687] (**) Option "xkb_layout" "us"
    [ 2493.687] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event8)
    [ 2493.687] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall"
    [ 2493.687] (II) Using input driver 'evdev' for 'HP TrueVision HD'
    [ 2493.687] (**) HP TrueVision HD: always reports core events
    [ 2493.687] (**) evdev: HP TrueVision HD: Device: "/dev/input/event8"
    [ 2493.687] (--) evdev: HP TrueVision HD: Vendor 0x5986 Product 0x2ac
    [ 2493.687] (--) evdev: HP TrueVision HD: Found keys
    [ 2493.687] (II) evdev: HP TrueVision HD: Configuring as keyboard
    [ 2493.687] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8/event8"
    [ 2493.687] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD, id 10)
    [ 2493.687] (**) Option "xkb_rules" "evdev"
    [ 2493.687] (**) Option "xkb_model" "evdev"
    [ 2493.687] (**) Option "xkb_layout" "us"
    [ 2493.687] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
    [ 2493.687] (II) No input driver specified, ignoring this device.
    [ 2493.687] (II) This device may have been added with another device file.
    [ 2493.687] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
    [ 2493.687] (II) No input driver specified, ignoring this device.
    [ 2493.687] (II) This device may have been added with another device file.
    [ 2493.687] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
    [ 2493.688] (II) No input driver specified, ignoring this device.
    [ 2493.688] (II) This device may have been added with another device file.
    [ 2493.688] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
    [ 2493.688] (II) No input driver specified, ignoring this device.
    [ 2493.688] (II) This device may have been added with another device file.
    [ 2493.688] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2493.688] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2493.688] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2493.688] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2493.688] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2493.688] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2493.688] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2493.688] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2493.688] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2493.688] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 2493.688] (**) Option "xkb_rules" "evdev"
    [ 2493.688] (**) Option "xkb_model" "evdev"
    [ 2493.688] (**) Option "xkb_layout" "us"
    [ 2493.688] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 2493.688] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 2493.688] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 2493.688] (II) LoadModule: "synaptics"
    [ 2493.688] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2493.688] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2493.688] compiled for 1.12.2, module version = 1.6.2
    [ 2493.688] Module class: X.Org XInput Driver
    [ 2493.688] ABI class: X.Org XInput driver, version 16.0
    [ 2493.688] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 2493.688] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2493.688] (**) Option "Device" "/dev/input/event9"
    [ 2493.689] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5756
    [ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4868
    [ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2493.689] (**) Option "FastTaps" "1"
    [ 2493.689] (**) Option "EmulateMidButtonTime" "0"
    [ 2493.689] (**) Option "TapButton1" "1"
    [ 2493.689] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 2493.689] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2493.689] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 2493.689] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 2493.690] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    [ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2493.690] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2493.690] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 2493.691] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2493.691] (II) No input driver specified, ignoring this device.
    [ 2493.691] (II) This device may have been added with another device file.
    [ 2493.691] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event14)
    [ 2493.691] (II) No input driver specified, ignoring this device.
    [ 2493.691] (II) This device may have been added with another device file.
    [ 2493.692] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
    [ 2493.692] (II) No input driver specified, ignoring this device.
    [ 2493.692] (II) This device may have been added with another device file.
    [ 2493.692] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 2493.692] (II) No input driver specified, ignoring this device.
    [ 2493.692] (II) This device may have been added with another device file.
    [ 2493.693] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
    [ 2493.693] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2493.693] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
    [ 2493.693] (**) HP WMI hotkeys: always reports core events
    [ 2493.693] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
    [ 2493.693] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
    [ 2493.694] (--) evdev: HP WMI hotkeys: Found keys
    [ 2493.694] (II) evdev: HP WMI hotkeys: Configuring as keyboard
    [ 2493.694] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
    [ 2493.694] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
    [ 2493.694] (**) Option "xkb_rules" "evdev"
    [ 2493.694] (**) Option "xkb_model" "evdev"
    [ 2493.694] (**) Option "xkb_layout" "us"
    [ 2500.586] (II) intel(0): EDID vendor "AUO", prod id 5022
    [ 2500.586] (II) intel(0): Printing DDC gathered Modelines:
    [ 2500.587] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
    [ 2502.163] (II) intel(0): EDID vendor "AUO", prod id 5022
    [ 2502.163] (II) intel(0): Printing DDC gathered Modelines:
    [ 2502.163] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
    [ 2502.206] (II) intel(0): EDID vendor "AUO", prod id 5022
    [ 2502.206] (II) intel(0): Printing DDC gathered Modelines:
    [ 2502.206] (II) intel(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1966 900 903 909 912 -hsync -vsync (54.8 kHz eP)
    Please inform me of any more info you would need.
    This is pretty confusing, any help highly appreciated, thanks!

    I have found a workaround in this bug report.
    Make a script in /usr/lib/systemd/system-sleep/keyboard.sh
    #!/bin/sh
    case $1/$2 in
    post/*)
    echo -n rescan > /sys/devices/platform/i8042/serio1/drvctl
    esac
    Do not forget to make it executable:
    chmod a+x /usr/lib/systemd/system-sleep/keyboard.sh

  • Update to 10.6.8 - system hang (mouse issue) after resume from sleep

    I am on older
    MacBook Pro3.1
    Intel Core 2 Duo
    2.6GHz
    Run on 10.6.8 almost flawelessly. Shortly after upgrade to 10.6.8 system started to hang periodically after resuming from sleep. Symptoms are that it stops responding to mouse (be it touch pad or USB mouse). Keyboard seems to be ok but system doesn't seem to be fully functional. I am able to ssh from the other computer and 'shutdown -r now' after reboot system seem to be ok until next resume from sleep. What interesting though is that this problem newer manifests then I am using external monitor.

    Found problem. It was due to magic mouse that I left on. I carry this mouse in the laptop bag but rarely use it. Last time I used it (around the same time I install the update) I left it on in the bag. It was apparently disconnecting/connecting on its own and by some reason sometimes was breaking touch pad and other usb mouse connected to laptop, as soon as I switched magic mouse off broblem was fixed

Maybe you are looking for

  • How do I setup multiple users on 1 icloud

    I am trying to figure out what the best setup is for the following: Myself: Ipad, Iphone 4s & ipod, apple tv Wife: iphone, ipod I am trying to have all our photos, music, etc be available on the cloud so that we have access to each others music and p

  • Knowing where the call to?

    Hi experts, I got 1 secretary who support 3 users. She's asking on how to know on the Ip Phone unit (7960) for whose call when a missed call has been received by her or whose call is that for? Is there a way what is the original called number on the

  • Upgrading from 10.3.9 to latest possible version

    I have a PowerPC dual 1.8GHz G5...what is the most recent version of OS X that can run on this machine? 10.5? If so, which version do you recommend that is the most stable?

  • JDeveloper, export/import of UML diagrams

    Hi All, We (Oracle Poland) are looking for a tool/extension enabling import of UML diagrams (activity, use-case) into JDeveloper. We are particularly interested in exchanging information between JDeveloper and Sybase PowerDesigner. I appreciate very

  • Oracle 9i Real Application Cluster Hardware Recommandation?

    Is there any recommandation for hardware setup for Oracle 9i? I am looking for a hardware setup to support Oracle 9i Real Application Cluster. Thanks in advances Laurence