[SOLVED] Rip or play back audio/video DVD

Recently I bought a DVD that contains audio content as well as video content. On the packaging it says that it is in the "DVD Audio/Video" format.
Today I wanted to rip or at least play back this DVD on my computer. When inserting a "normal" video DVD into the disk drive, the DE which I am using (Gnome 3.12) displays a notification that offers the possibility to start playback of the inserted DVD. No such notification was displayed for the DVD in question.
Since anyway my original intention was to rip the DVD to my hard drive, this didn't bother me much and I started looking for a program for ripping DVDs. This research resulted in me installing dvd::rip.
Unfortunately, upon trying to the read the table of contents of the DVD, dvd::rip displays the below error message:
Job 'Determine number of titles' failed with error message:
Command exits with failure code:
Command: execflow tcprobe -H 10 -i \/dev\/sr0 && echo EXECFLOW_OK
Output: libdvdread: Could not open /dev/sr0 with libdvdcss.
libdvdread: Can't open /dev/sr0 for reading
[[31;1mtcprobe[0m][31;1m critical[0m: unrecognized filetype for '/dev/sr0'
While googling for problems with DVD playback in Arch, I came across some generic solutions that didn't solve the problem, namely adding my user to the audio, video, and optical groups as well as installing packages for handling DVDs (libdvdread, libdvdcss, libdvdnav).
Is there someone who has managed to rip or play back DVDs in the "DVD Audio/Video" format?
Last edited by Sir Sure E. Nuff (2014-05-25 09:25:15)

Can you mount the disk and see its file system? If it is a DVD, you should be able to do this, regardless of and CSS.
Is there any chance this a VCD (Video CD)?

Similar Messages

HELP!How to create HD disc that will play back in HD DVD or Blu-Ray player?

Footage comes from Panasonic HVX200 as DVCPRO HD 1080i60, all appropriate settings made in FCP5 to edit. Have already made SD DVD, whoopie.
Now client is interested in real HD version that they can play back on HD DVD or Blu-Ray set top unit. Of all my research, I've discovered little about how to make a "real" HD video disc. OSX doesn't support Blu-Ray burning, OK. What about HD DVD burning support? And what drive to purchase for this application?
I understand DVD Studio will allow me to author a disc with HD content...that I can burn onto DVD5. Useless to the client. Need to burn on either Blu-Ray or HD DVD media.
Aside from encoding in Compressor, what do I do when I need to make this HD disc happen? Compressor step seems easy enough to figure out. Just very unclear on how to burn out appropriate video disc.
Thanks for your help.

For Blu-Ray creation:
I'm curious if DVDit! works in parallels too, though it will certainly work in BootCamp. The question is what format should FCP/Compressor output to in order for DVDIt, etc. on BC or Parallels need in order to create the disc?
MPEG-2 and H.264 should work, but who knows?
In the meantime, I have HDV source footage that I edit. I print the final edit back to HDV for archiving, and burn a HD-DVD on a DL DVD+R red laser disc to show on my Toshiba HD-DVD player using DVDSP. It works, and I can get about 40 minutes of MPEG-2/HDV on there without transcoding at 1080i and it looks fantastic.
In the future, I hope to be able to dump the HDV final edit onto a Blu-Ray disc. I'm guessing Adobe Encore will be needed on the Mac for that.
The point here is there certainly are options that work. I do wish Apple added Blu-Ray burning capability.
There's still room for that, however... FCS 1 (and even now 2, with AVCHD support, albeit non-native) have histories of adding new support for codecs, etc. in free updates.

When playing a home video DVD using DVD Player I tried to use the "Controls, Use current frame as jacket picture" facility to create a printable image but with no success. Can anybody point me in the right direction?

When playing a home video DVD (created on my Panasonic DVD/Hard Disc recorder) using the Mac DVD Player, I tried to use the "Controls, Use current frame as jacket picture" facility to create a printable image but with no success. I assume that any file created by this action would be stored somewhere in a common format but cannot find any such file. Can anybody point me in the right direction?

Hi Sinious,
Interesting to know about 10.8 and Flash. I'll hold off upgrading until they work together. Currently using 10.6.8 at home and same on the Universtity's computers.
Haven't verified on Windows but shall do later in the week if I can get access to a Windows machine.
Both the Flash player and the Projector come up not full screen, and if I leave it that way then things work OK as long as I don't make the video full screen (using the full screen button on the skin).
However if I make the swf or projector full-screen (by using CMD-F or the menu option) then when I click on the menu item to take me to the page with the video on it, instead of a page with a smallish video and back button I get a black screen with no obvious controls. If I then press Escape I get my normal screen back and I am in the page that should have the video but there is not video and the back button does not work. So something wierd is going on here.
If I make a file without any videos with a similar navigation structure everyting works ok except that when I go full screen I lose the finger cursor when I roll over my buttons (which is also wierd).

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

How can I fix: iPad1 plays back audio podcasts (not music) at double speed?

Hello @GiveHP2ndChance,
I understand that you are not able to get adequate sound from your notebook computer's BEATS Audio, and I would be happy to assist you in this matter!
To correct the sound on your system, I recommend following this document on No Sound from Speakers (Windows 7) or for (Windows 8). This should help improve the quality of the audio on your notebook.
To assist you further, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If the same lack of quality is present when headphones are plugged in.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

I need to play back a video-recording i have taken myself and have it show the time count in seconds on the play back. Can you help?

I need to play back a video-recording that I have taken myself and have it show the time counter in secs/minutes in the playback. Can anyone help?

the movie editing app "Avid Studio" displays a time counter, as does the Pinnacle editing app. Oddly enough, I movie does not. (unless I have it somehow turned off.)

How to play back AVCHD video files without jerkiness result?

Hi all, I have an iMac 27" 3.06Ghz as well as the new MacBook Air 13 1.86Ghz, and both have 4GB of RAM. When I tried to play back AVCHD video files (*.mts) recorded from my Canon HF200 HD camcorder, the play back is always jerky and choppy. I have tried various software like Perian for QT, VLC, MPlayer Extended, all have the same result. However, I can play back other 1080p files like MKV and MOV just fine.
Is the jerkiness problem that I am seeing due to underpowered hardware? or is it I am not using the correct software? Note that I am not trying to edit HD videos, I just want to be able to play them back smoothly. I can play the same files on Windows 7 natively without any issues.
I am curious if any of you have the same problem. Please help!
Thanks in advance.
Ken

Swaza,
Just thought I would jump in and share some experiences with .tod and .mod files.
I too have the JVC GZ-HD7 camera and I can confirm that the new version of the MPEG-SC 1.93beta will open and convert .tod to .mov for use with iMovieHD. I am not sure that the files can be used with iMovie08 since I have not tried, but it will work in iMovieHD just like any other qt or .mov file import.
Also, you can use the QTpro plugin that came with the camera (should be on the CD as the only MAC software available.) This will allow you to open the files in QT and convert them to any other format needed. This plugin unfortunately does not allow QTpro to open the older .mod files of previous JVC cameras. For that you can still use MPEG-SC.
In my experiences over the last few weeks, having mistakenly dumped all of my footage onto my hdd as I used to do with my older JVC cameras, I am now stuck with 3 hours of footage on my HDD as .tod files. I have been struggling to find the right blend of codec type, compression amount, fps, and quality to convert these files in an acceptable resolution (1920x1080 full - another mistake since iMovie08 will not import this quality but will import the 1440 CBR mode.) Converting these files is a nightmare and has become a stain on my otherwise wonderfu lexperience with this new camera (It is an awesome camera despite what negative stuff the "Canon fanboys" are saying!) It takes an unbelievably long time to convert. And you will find that when viewing these files in QT either as .tod or even after converting to .mov, they will be jerky and stutter. I believe this is more to the fact that the files are just really huge. Playback inside of iMovie06HD was perfect for me though.
Hope this helps out and I hope others may offer solutions as to what codecs they are using and what settings they are using to keep the quality as high as possible when converting these files.

While playing back a video file the sound goes sort of like an echo and stopping the video and playing back again it sound great, the video is recorded live with an AJA system and plays fine on the units;any clue to what is going

While playing back a video recorded on a AJA system we transfered it to the macbook pro played it with quicktime works great and sometimes it sounds like an echo same file track and it plays fine on the aja system.Tried it on another macbook pro and it did the same issue.Any clue to what is going on.Thank you.

Thank you supermacmom!
I have the LifeProof case for the iPhone5, and I remember the instructions saying that any protective screen cover should be removed before enclosing the phone into the case, but I left mine on with no ill effects.
But I should have taken off the back protective film, which was covering the video mic!

Logic wont play back audio regions under certain tracks.

Hello! I am rearranging my audio files (throwing them all to my secondary hard drive, where I record to ). I did this, and now certain audio files to do not play back in my logic projects, but there is no warning that says the file cannot be found--which is what I am used to happening. At that point I would either hit the Search button, or the Manually Find button. Instead, the region appears as per usual, just with nothing playing back. I know I could import the audio back into my projects manually--which would be fine for those that start at a specific, clean-cut time, but what about all those spliced and diced regions that are cut up and laid out all over the place!?
I discovered new details to the weirdness . . .
It seems, in the few projects that I relocated audio, that the affected regions cannot be played back unless I move them to another audio track. What??? For example, the vocal track in one song, which is all set up with its plugins and such as Audio Track 2, will produce no sound unless I drag it to another audio track, say Audio Track 3 or 4. It is bonkers!! What the heck is that about?
This is what happened in all of the projects affected by my source audio rearrangement. Sure, I could easily just copy my channel strip settings to a new track, relocate my audio region to it, and hope all goes well thereforth, but I would much rather get to the root of this oddity so it doesn't somehow buck me later.
What do you think it could be?
Oh yea, in one of the projects, all the other audio tracks seem to play back fine, except for the recorded bass track. Okay, so just to check, I drag the bass audio to another track--yep, it does play back. But I realized that the track that held the bass region (Track 4) is actually playing back the vocals (which are also playing back normally in their intended track). I initially didn't notice the extra vocals underneath my normal vocals track, with their low-key bass plug-in settings. Funny thing is, there isn't even a region on Track 4 any more! How is it playing anything back at all?? Not that it makes any more sense that it would be playing back vocals with a bass region.
Also, the fact that Logic Pro keeps quitting unexpectedly does not inspire much confidence. This has just been lately, and I've only been playing with these projects lately, trying to figure this out.
Is my Logic haunted? =(
I welcome any and all objective suggestions! I am feeling just the slightest bit overwhelmed by this odd behavior.
Thanks!
(i checked, but did not see that the tracks were muted in anyway, including the region itself)

I figured something out that might tell someone what I did to screw things up!
I think I did something to mess up the environment or something. I know this much now: When I created a new project, I created 6 new audio tracks. I noticed that a piece of previously recorded audio that I imported into the project would only play back on ever other track! I than noticed that on the every other track (that would not play back the audio when it was dragged to it), there was neither a single circle (indicating mono for the track) or the two overlapping circles (indicating stereo for the track) beneath the channel's level meter.
There must be some significance to this that I do not quite understand!
I then went back and launched several of my problematic projects to see if the tracks that would not play back audio also did not display either the mono or stereo circles on their respective channel strips. They did not! What kind of global setting did I change that would cause this?
There was one project that had one track that bared neither mono or stereo an played back its audio (Although, in this same project, there was another track that bared neither symbol that was not playing back its audio). Anyway, I noticed something that was weird to me, but will likely tell someone what the heck I must have inadvertently done to cause all of this:
When I change one audio track (that bares the mono symbol) into stereo, the next audio track (that didn't display either symbol) seems like it is combined with the previous track's output!
Very strange! Did I somehow set some global preference to split up my audio tracks across each not audio track?? If so, could someone please explain to me what and I did that? Thanks!

DVD Studio Pro not playing back audio of asset converted from FCP via compressor.

I exported project via compressor:
File Extension: m2v
Estimated file size: 4.34 GB
Video Encoder
    Format: M2V
    Width: 720
    Height: 480
    Pixel aspect ratio: NTSC CCIR 601/DV
    Crop: None
    Frame rate: 29.97
    Frame Controls: Off
    Aspect ratio: 4:3
    Field dominance: Bottom first
    Average data rate: 3.6 (Mbps)
    2 Pass VBR enabled
        Maximum data rate: 7.5 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 15, Structure: IBBP
    DVD Studio Pro meta-data enabled
This took about 7.5 hours. I exported the audio separately as AC3. Finder plays it sound & pictures. Quicktime plays the video. DVD Studio Pro, when I drag the assets (video, audio) to the timeline editor, so I can play it in the viewer, it plays the audio the video is black. No setting in view or any other setting will get it to play the video. This project is due to ship today and I don't want to re import it if I don't have to.
I exported this project before the MPEG2 export as a Qicktime with .mov suffix. This plays alright, but there is artifacting around motion. I think this is due to low VBR, but don't know. Can ayone help?
Dix Moser
[email protected]
FCP Studio
PowerMac 1.8G 3G mem 250G HD
750 G ext. Firewire drive (where media is stored)

If I may chime in...
I'm a little confused on the "what plays what" part, but all that really matters is what DVDSP sees/plays.
I've worked on a system like yours and what I'd recommend is:
1. NEVER export via Compressor. It's just ungodly slow on anything less than a Quad. Export a self contained QuickTime Movie using the first export option and use that to feed Compressor.
2. Segment your output into manageable clips (I like 15-20 minutes) both to perfect the encoding and so you aren't re-encoding the whole show if something goes sour. It will all play fine as long as it's all in the same DVDSP timeline.
From what you describe, I'm thinking you're on an early version of Compressor that had A-Pack as the AC-3 encoder. This is no biggie, I mention it mostly to verify. Early Compressor was good too.
Make maybe a 5 minute piece to tune up. Just export as normal, then into Compressor. Your encoding values seem about right. Get the AV pair into DVDSP and it should play. I'm guessing that part of your problem is that the processor is fighting to handle the project size. Build the test clip project and look at it in DVD Player to view what would have been burned. If all looks OK, go for it. If not, bring back the results for discussion. This should be a snap, it's just a really big project. Keep your head up, I had a friend do a 225-minute disk on his G5...

Imovie '08 is not playing back audio incorporated into video

Okay. I am doing a Let's Play and using iMovie to edit my game footage and commentary together. However, I recently discovered that my game footage wasn't playing back within iMovie (the finished product exported and the base footage were just fine) And, in my most recent episode editing session, I found it would no longer display the movie thumbnails except for whatever one I had my mouse over... some help would be nice....

Okay, I just checked, and apparently, the game audio isn't in the finished product, either.
wait a moment... I just retried putting the movies together and it had audio again... weird.

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

As im recording videos on Photo Booth, my movements seem late. then when i play back the video, the sound comes in really late. how do i fix this?

theres like a 5 second delay from when i say something to when the sound of my voice actually comes in when i play back movies in photobooth.i tried restarting my computer and even turning on *auto flip new items. when i turn that on the problem is fixed for only one video. when i try to record the next one its back to the delay. is there anyway to trouble shoot this? or do i have to take my mac to the apple store. to top it all off ive only had my computer for 5 days. help please !!!!

I had the same problem since my moutain lion update, too.
I fixed it in the following way.
-Search for utilities on the HELP option on the top taskbar
- Go to utilities and open your audio-midi-setup.
- check your input and output properties
- Change input and output 44100khz and 16-BIT for both.(these are the most common properties)
my sound and video are not ouf sync in photo booth anymore.
let me know if it works for you!
cheers

Live video capture while playing back another video track?

Is it possible to capture live video while another video track is being played back? I would like to do this for multitrack video recording of music: a) record a video track, then b) record a second video track while listening to/watching the first. Exactly like multitrack recording of audio as in Garage Band, but with video.
A similar question was asked here, but I want to avoid manual synchronization. http://discussions.apple.com/thread.jspa?messageID=11712024&#11712024
As an example, there are lots of multitrack videos on youtube, but you can often tell synchronization has been done manually as the audio and video are out of sync (even if only slightly):
http://www.youtube.com/watch?v=a2RA0vsZXf8&feature=related
Many thanks!

I'm not too familiar with video editing (yet), so please forgive me if I've misunderstood your suggestions. I think what I'm talking about would have to be done post (after shooting multiple video tracks?), and couldn't be done with video switching (live switching between multiple video feeds?). Here's a much better example of what I'm trying to do: http://www.youtube.com/watch?v=PGKErn2Zr88
What it boils down to in my mind is precise synchronization of a new capture with something pre-recorded (be it audio or video). If no software can do this (yet), perhaps there's a way to do it with additional hardware, for example playing video on a monitor while simultaneously recording with a camera, assuming the devices can be synchronized somehow?
Thanks!

Play back audio at slower speed

Hi everyone,
I can play back video clips at slower than normal speed, but I can't find the equivalent method for slowing down audio tracks. For example, how do I play back an audio track at 1/3 of normal speed?
Cheers!

Soundtrack.
http://www.geniusdv.com/newsandtutorials/2008/01/time-stretch-function-in-soundtrack-pro.php

[SOLVED] Rip or play back audio/video DVD

Similar Messages

Maybe you are looking for