[SOLVED] Rosgarden package not working

Hi everybody,
it's my first post here, so I hope I get all things done.
I installed the new version of Rosegarden (10.02; i686 architecture) for the first time yesterday evening. I wanted to check out its features.
Rosegarden's package information:
http://www.archlinux.org/packages/extra … osegarden/
I usually start programs via the Bash. But when starting Rosegarden this error occurs:
[user@asterix ~]$ rosegarden
rosegarden: symbol lookup error: rosegarden: undefined symbol: _ZN9QListData7detach3Ev
It seems that there's something (a package?!?) missing.
I installed Rosegarden with Pacman:
[2010-02-15 19:37] synchronizing package lists
[2010-02-15 19:41] installed liblrdf (0.4.0-6)
[2010-02-15 19:41] installed liblo (0.26-1)
[2010-02-15 19:41] installed dssi (1.0.0-3)
[2010-02-15 19:41] installed rosegarden (10.02-1)
According to Rosegarden's package information the following packages are required (the missing one were installed by Pacman itself; in brackets the installed version):
- fftw (3.2.2-1)
- qt (4.5.3-4)
- liblrdf (0.4.0-6)
- dssi (1.0.0-3)
- ladspa (1.13-2)
- liblo (0.26-1)
- lirc-utils (0.8.6-3)
- shared-mime-info (0.71-1)
I've searched for previous errors:
http://bbs.archlinux.org/viewtopic.php?id=82791
There's no relation to my problem.
It would be great if someone has a clue what to do. I hope all necessary information were mentioned.
Thanks.
Last edited by Schwefelsaeure (2010-02-17 23:20:30)

Hi,
sorry for my late reply, but I was busy the all day long.
Thank you 'drcouzelis' for the tip to build Rosegarden on my own (with ABS).
The building process took a while on my old AMD Athlon XP 1900+ but it works now.
Unfortunately I don't know what went wrong before. It's the first package (within Pacman) which does not work since I've been using Arch Linux (about three years now).
Arch Linux is a great distribution with a great and helpful community.
Thanks for support.

Similar Messages

I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

[SOLVED] bibble5pro aur package not working?

Hi together,
i did
yaourt -S -aur bibble5pro
and installed this package. Worked without error, but by starting bibble5pro i got this:
[vinschni@myhost ~]$ bibble5pro
Install Path: /opt/bibble5pro
LD_PATH: /opt/bibble5pro/lib:
XLIB_SKIP_ARGB_VISUALS: 1
linux-gate.so.1 => (0xb7810000)
libkodakcms.so => /opt/bibble5pro/lib/libkodakcms.so (0xb7795000)
libuuid.so.1 => /lib/libuuid.so.1 (0xb7773000)
libtcmalloc_minimal.so.0 => /opt/bibble5pro/lib/libtcmalloc_minimal.so.0 (0xb7741000)
libQtSvg.so.4 => /opt/bibble5pro/lib/libQtSvg.so.4 (0xb76f5000)
libQt3Support.so.4 => /opt/bibble5pro/lib/libQt3Support.so.4 (0xb740f000)
libQtSql.so.4 => /opt/bibble5pro/lib/libQtSql.so.4 (0xb7376000)
libQtOpenGL.so.4 => /opt/bibble5pro/lib/libQtOpenGL.so.4 (0xb7301000)
libGLU.so.1 => /usr/lib/libGLU.so.1 (0xb7293000)
libGL.so.1 => /usr/lib/libGL.so.1 (0xb71cf000)
libQtNetwork.so.4 => /opt/bibble5pro/lib/libQtNetwork.so.4 (0xb70d2000)
libQtDesigner.so.4 => /opt/bibble5pro/lib/libQtDesigner.so.4 (0xb6df6000)
libQtScript.so.4 => /opt/bibble5pro/lib/libQtScript.so.4 (0xb6cd5000)
libQtXml.so.4 => /opt/bibble5pro/lib/libQtXml.so.4 (0xb6c90000)
libQtGui.so.4 => /opt/bibble5pro/lib/libQtGui.so.4 (0xb63a8000)
libpng12.so.0 => not found
libSM.so.6 => /usr/lib/libSM.so.6 (0xb639f000)
libICE.so.6 => /usr/lib/libICE.so.6 (0xb6388000)
libXi.so.6 => /usr/lib/libXi.so.6 (0xb637b000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb6372000)
libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0xb636a000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb62e5000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb62b7000)
libXext.so.6 => /usr/lib/libXext.so.6 (0xb62a9000)
libX11.so.6 => /usr/lib/libX11.so.6 (0xb618f000)
libQtCore.so.4 => /opt/bibble5pro/lib/libQtCore.so.4 (0xb5f69000)
libz.so.1 => /usr/lib/libz.so.1 (0xb5f54000)
libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0xb5f50000)
librt.so.1 => /lib/librt.so.1 (0xb5f47000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0xb5e82000)
libdl.so.2 => /lib/libdl.so.2 (0xb5e7e000)
libpthread.so.0 => /lib/libpthread.so.0 (0xb5e64000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb5d6d000)
libm.so.6 => /lib/libm.so.6 (0xb5d47000)
libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0xb5d2a000)
libc.so.6 => /lib/libc.so.6 (0xb5be3000)
/lib/ld-linux.so.2 (0xb7811000)
libpng12.so.0 => not found
libpng12.so.0 => not found
libpng12.so.0 => not found
libGLcore.so.1 => /usr/lib/libGLcore.so.1 (0xb45d2000)
libnvidia-tls.so.1 => /usr/lib/libnvidia-tls.so.1 (0xb45cf000)
libpng12.so.0 => not found
libpng12.so.0 => not found
libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb45a9000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb4590000)
libpcre.so.0 => /lib/libpcre.so.0 (0xb455d000)
libXau.so.6 => /usr/lib/libXau.so.6 (0xb455a000)
libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb4555000)
./bibblepro: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
Is there maybe missing a dependency in pkgbuild? Starting with root access dosen't make a difference. Hope somebody has an idea.
Greetings,
Vinschni
Last edited by Vinschni (2010-04-16 12:11:51)

Got it working.
In libpng12 PKGBUILD was an error in line 26. After deleting
patch -p1 -i "${srcdir}/libpng-1.2.38-apng.patch" || return 1
build was successful.
Vinschni

Solved rEFInd does not work after update

Hello.
Today, I updated rEFInd with yaourt.
After the update, I copied the new files in /boot/efi.
I rebooted and now rEFInd does not work.
The only message I got is:
rEFInd - Initializing
After 2-3 minutes, the computer reboots and I got the same error message.
To boot, I had to use the UEFI shell.
First of all, is there a log file for rEFInd?
It is not easy at all to debug it when we don't have any error messages.
After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
Do you know what to do to solve my problem?
Thanks for your help.
Last edited by antoyo (2012-11-07 23:29:55)

@antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system)

[SOLVED] luks-passphrase not working after update

SOLVED: Hard drive was damaged. new hard drive ''fixed'' issue
Hello,
i updated my arch on 2015-06-05. After restarting my cryptsetup does not accept my password anymore.
No key available with this passphrase.
Searching the forum i found a couple of simular topics, nevertheless none of them offered a solution to the problem:
https://bbs.archlinux.org/viewtopic.php?id=169408
https://bbs.archlinux.org/viewtopic.php?id=175737
https://bbs.archlinux.org/viewtopic.php?id=148562
So the solutions that did not work so far:
1. Downgrading cryptsetup package
2. Downgrading kbd package
3. Checked that my keyboard works just fine (both in grub and in live system)
4. Manualy loading the aes modules in live system to ensure correct decryption (found that issue somewhere...)
Unfortunatly i did not backup the luks header file.
So i don't know if there is some other way to check if the header is broken or how to find out why it will not decrypt my disk.
I am happy for any solutions or ideas
Regards,
Some outputs from cryptsetup:
cryptsetup -v isLuks /dev/sda2
Command successful.
cryptsetup -v luksDump /dev/sda2
LUKS header information for /dev/sda2
Version: 1
Cipher name: aes
Cipher mode: xts-plain64
Hash spec: sha512
Payload offset: 4096
MK bits: 512
MK digest: 66 00 4c 66 17 ec 2c 82 68 b3 26 2e 58 df 76 cf 3b f5 18 ef
MK salt: b8 e0 5d 4d 5c bb 23 6a fc fc 86 d8 5d b6 3f 1f
28 b6 0e 49 33 9a 8b e6 a2 55 f5 42 32 92 95 db
MK iterations: 51000
UUID: dbe69743-7753-4a54-a221-a662042c0444
Key Slot 0: ENABLED
Iterations: 204146
Salt: fa 22 ec 71 49 2c af 9f 64 10 b3 8e f4 76 31 c0
02 16 dd 2c 72 7e 2f 4b 0b 08 2f 02 03 dd 52 dc
Key material offset: 8
AF stripes: 4000
Key Slot 1: DISABLED
Key Slot 2: DISABLED
Key Slot 3: DISABLED
Key Slot 4: DISABLED
Key Slot 5: DISABLED
Key Slot 6: DISABLED
Key Slot 7: DISABLED
Command successful.
Last edited by Fleeep (2015-06-14 12:09:24)

losetup --read-only /dev/loop7 /dev/sda2
dmsetup create foobar --table '0 2048 crypt aes-xts-plain64 4ec1a210c7c44208ca132559cda338d7651471abd47b619b1d3a15d273ab69875cdd2bcb7c2750f6cab9e6b2e19f487fb4766bb7826819c8b2de898fe3c0b999 0 7:7 4096'
file -s -L /dev/mapper/foobar
hexdump -C /dev/mapper/foobar
Gives me the master key for the decrypted partition (denoted as forum_key_kex).
Do i need to convert this to binary or something to use it...?
Assume Filesystem/dev_sda2 is the partition to decrypt.
So to decrypt the partition directly with master key i have to do one of the following, wasn't sure which hash to take...:
echo "0 `blockdev --getsz Filesystem/dev_sda2` crypt aes-cbc-essiv:sha256 `echo SomeEncrypt | sha256sum | head -c 64` 0 Filesystem/dev_sda2 4096" | dmsetup create luks_volume
echo "0 `blockdev --getsz Filesystem/dev_sda2` crypt aes-cbc-essiv:sha256 `sha256sum forum_key_hex | head -c 64` 0 Filesystem/dev_sda2 4096" | dmsetup create luks_volume
as i found on:
http://unix.stackexchange.com/questions … master-key
(approved by you in the comment as it seems)
But both give me an error:
device-mapper: resume ioctl on luks_volume failed: Invalid argument
Command failed
Did i even do this right?
Also when i copied the partition to an external device dd_rescue observed 6 errors in blocks. So those might just be the cause of failure all the time.

Import scenario package not working

Hi exports,
On a test environment i created a scenario which i now would like to transfer to another server.
I exported the correct scenario, but on the other server, the import is not working.
I can submit my package, it shows that there is no current version of this package, but hitting the "IMPORT" button doesnt do anything.
Im using (on both servers) SAP B1 9.0 pl 08 with the same integration framework.
Any idea's on how to solve this?
Kind regards
Frederik

Hi Radosla,
Yep, thx for the hint.
Looks like i put it on th test server in compatibility mode, but not on the real server.
Changing this with F12 to IE 8 did the trick!
Regards
Frederik

[SOLVED] Touchpad Synaptics not works after last update of xf86-input

after this packages
xf86-input-synaptics 1.8.0-2 <<< works
xf86-input-synaptics 1.8.0-3 << not works
https://projects.archlinux.org/svntogit … 54796cff46
dmesg|grep input
[ 0.866883] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.842679] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:04F3:0103.0001/input/input2
[ 1.842756] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-1/input0
[ 1.843934] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:04F3:0103.0002/input/input3
[ 1.844001] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-1/input1
[ 2.169742] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:09DA:9066.0003/input/input4
[ 2.169933] hid-generic 0003:09DA:9066.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-2/input0
[ 2.171262] input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:09DA:9066.0004/input/input5
[ 2.171357] hid-generic 0003:09DA:9066.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-2/input1
[ 10.099521] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 10.099624] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[ 10.099692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 10.398671] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 11.840489] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 12.211308] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input11
[ 12.212530] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 13.254950] sound hdaudioC0D0: inputs:
[ 13.580490] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input13
[ 13.580985] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.581106] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 13.581224] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 17.274881] input: WebCam SC-13HDL11939N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
journalctl -b |grep input
ago 21 09:02:37 drog-laptop kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ago 21 09:02:37 drog-laptop kernel: input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:04F3:0103.0001/input/input2
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-1/input0
ago 21 09:02:37 drog-laptop kernel: input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:04F3:0103.0002/input/input3
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-1/input1
ago 21 09:02:37 drog-laptop kernel: input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:09DA:9066.0003/input/input4
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:09DA:9066.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:14.0-2/input0
ago 21 09:02:37 drog-laptop kernel: input: A4TECH USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:09DA:9066.0004/input/input5
ago 21 09:02:37 drog-laptop kernel: hid-generic 0003:09DA:9066.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:14.0-2/input1
ago 21 09:02:40 drog-laptop kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
ago 21 09:02:40 drog-laptop kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ago 21 09:02:40 drog-laptop kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ago 21 09:02:41 drog-laptop kernel: input: PC Speaker as /devices/platform/pcspkr/input/input9
ago 21 09:02:42 drog-laptop kernel: input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
ago 21 09:02:42 drog-laptop kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input11
ago 21 09:02:42 drog-laptop kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
ago 21 09:02:43 drog-laptop kernel: sound hdaudioC0D0: inputs:
ago 21 09:02:44 drog-laptop kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input13
ago 21 09:02:44 drog-laptop kernel: input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
ago 21 09:02:44 drog-laptop kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
ago 21 09:02:44 drog-laptop kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
ago 21 09:02:47 drog-laptop kernel: input: WebCam SC-13HDL11939N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
ago 21 09:02:52 drog-laptop acpid[589]: starting up with netlink and the input layer
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event7 (Power Button)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event11 (Video Bus)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event10 (Video Bus)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event6 (Power Button)
ago 21 09:02:53 drog-laptop systemd-logind[585]: Watching system buttons on /dev/input/event5 (Lid Switch)
cat /usr/share/X11/xorg.conf.d/50-synaptics.conf
# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
# Option "OptionName" "value"
Section "InputClass"
Identifier "touchpad catchall"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
MatchDevicePath "/dev/input/event*"
EndSection
Section "InputClass"
Identifier "touchpad ignore duplicates"
MatchIsTouchpad "on"
MatchOS "Linux"
MatchDevicePath "/dev/input/mouse*"
Option "Ignore" "on"
EndSection
# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Default clickpad buttons"
MatchDriver "synaptics"
Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
Option "SecondarySoftButtonAreas" "58% 0 0 8% 42% 58% 0 8%"
EndSection
# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
Identifier "Disable clickpad buttons on Apple touchpads"
MatchProduct "Apple|bcm5974"
MatchDriver "synaptics"
Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection
xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ HID 04f3:0103 id=11 [slave pointer (2)]
⎜ ↳ A4TECH USB Device id=12 [slave pointer (2)]
⎜ ↳ A4TECH USB Device id=13 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=16 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
↳ HID 04f3:0103 id=10 [slave keyboard (3)]
↳ WebCam SC-13HDL11939N id=14 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=15 [slave keyboard (3)]
synclient
Couldn't find synaptics properties. No synaptics driver loaded?
lsmod
Module Size Used by
bbswitch 12878 0
nls_iso8859_1 12461 1
nls_cp437 16553 1
vfat 21231 1
fat 61984 1 vfat
fuse 87446 5
uvcvideo 78952 0
videobuf2_vmalloc 12816 1 uvcvideo
ath3k 12685 0
videobuf2_memops 12519 1 videobuf2_vmalloc
videobuf2_core 47787 1 uvcvideo
ecb 12737 1
v4l2_common 12995 1 videobuf2_core
btusb 25625 0
bluetooth 394557 3 ath3k,btusb
videodev 126443 3 uvcvideo,v4l2_common,videobuf2_core
media 18365 2 uvcvideo,videodev
6lowpan_iphc 16588 1 bluetooth
snd_hda_codec_hdmi 45117 1
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
nvram 13034 0
joydev 17063 0
mousedev 17272 0
ipt_REJECT 12465 1
xt_comment 12427 2
arc4 12536 2
xt_LOG 17156 5
ath9k 94538 0
ath9k_common 21746 1 ath9k
ath9k_hw 403753 2 ath9k_common,ath9k
ath 26067 3 ath9k_common,ath9k,ath9k_hw
mac80211 514630 1 ath9k
r8169 68119 0
mii 12675 1 r8169
cfg80211 454161 4 ath,ath9k_common,ath9k,mac80211
snd_hda_intel 26327 4
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
i915 864723 4
drm_kms_helper 49262 1 i915
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
iTCO_wdt 12831 0
iTCO_vendor_support 12649 1 iTCO_wdt
coretemp 12820 0
hwmon 12930 1 coretemp
led_class 12859 1 ath9k
intel_rapl 17356 0
rfkill 18867 3 cfg80211,bluetooth
x86_pkg_temp_thermal 12951 0
psmouse 102792 0
drm 258005 6 i915,drm_kms_helper
intel_powerclamp 17122 0
kvm_intel 143217 0
snd_timer 26614 1 snd_pcm
shpchp 35210 0
lpc_ich 20768 0
mei_me 17941 0
intel_gtt 17848 1 i915
kvm 413027 1 kvm_intel
crct10dif_pclmul 13394 0
crc32_pclmul 12915 0
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
cryptd 18553 1 ghash_clmulni_intel
microcode 22061 0
evdev 21544 29
pcspkr 12595 0
mac_hid 12633 0
i2c_algo_bit 12744 1 i915
i2c_i801 16965 0
mei 75033 1 mei_me
serio_raw 12849 0
i2c_core 50152 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
tpm_tis 17134 0
thermal 17559 0
fan 12681 0
battery 13356 0
snd 69340 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 13031 2 snd,snd_hda_codec
tpm 31467 1 tpm_tis
video 17995 1 i915
button 12909 1 i915
processor 27777 0
xt_limit 12601 7
wmi 17339 0
ac 12715 0
xt_tcpudp 12527 11
xt_addrtype 12557 4
nf_conntrack_ipv4 17706 7
nf_defrag_ipv4 12483 1 nf_conntrack_ipv4
xt_conntrack 12681 7
ip6_tables 26025 0
nf_conntrack_netbios_ns 12445 0
nf_conntrack_broadcast 12365 1 nf_conntrack_netbios_ns
nf_nat_ftp 12460 0
nf_nat 22338 1 nf_nat_ftp
nf_conntrack_ftp 16783 1 nf_nat_ftp
nf_conntrack 87324 7 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4
iptable_filter 12536 1
ip_tables 26011 1 iptable_filter
x_tables 27104 10 xt_comment,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ipt_REJECT,ip6_tables,xt_addrtype
ext4 497695 2
crc16 12343 2 ext4,bluetooth
mbcache 17171 1 ext4
jbd2 86460 1 ext4
hid_generic 12393 0
usbhid 44507 0
hid 102220 2 hid_generic,usbhid
sd_mod 44356 5
sr_mod 21903 0
cdrom 47479 1 sr_mod
crc_t10dif 12431 1 sd_mod
crct10dif_common 12356 2 crct10dif_pclmul,crc_t10dif
atkbd 22254 0
libps2 12739 2 atkbd,psmouse
ahci 29195 4
libahci 27158 1 ahci
libata 181553 2 ahci,libahci
ehci_pci 12512 0
scsi_mod 142915 3 libata,sd_mod,sr_mod
xhci_hcd 152990 0
ehci_hcd 69939 1 ehci_pci
usbcore 199328 7 ath3k,btusb,uvcvideo,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 12440 1 usbcore
i8042 18002 1 libps2
serio 18282 6 serio_raw,atkbd,i8042,psmouse
EDIT:
cat /var/log/Xorg.0.log| grep Synap
[ 301.566] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 301.566] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 301.566] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 301.566] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 301.566] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event9"
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 301.566] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 301.566] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 301.566] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 301.567] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 301.567] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[ 301.567] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 301.567] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 301.567] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 301.567] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
(EE) [dix] SynPS/2 Synaptics TouchPad: unable to find touch point 1
EDIT2:
SOLVED!
just remove /etc/X11/xorg.conf.d/10-evdev.conf
Last edited by drog (2014-08-21 13:29:49)

lordheavy wrote:
X reads first configuration in /usr/share/X11/xorg.conf.d then /etc/X11/xorg.conf.d
When you copy 10-evdev.conf file into /etc/X11 you completly override previous system configuration. It's the reason copying synaptics configuration file into /etc/X11 fixes the issue
Defining default system configuration in /etc/X11 with previous xorg was a mistake, now it's fixed.
Wiki should be fixed. It's not a packaging bug, but a configuration bug.
@lordheavy
I agree with you that the new xf86-input-synaptics package is using the right configuration scheme, however it is breaking the functionality on every installed system. It was a packaging bug, which is now fixed, but it has to be handled manually by most users of previous versions. That's why I won't re-open the bug report FS#41589. Instead, I am asking here: shouldn't this change be notified to the users just like it has been done for most breaking changes on archlinux frontpage news?
By the way, thanks for your great work.

SCCM 2012 Primary Site Recovery - Packages not working

I recently had to recover my Primary Site due to system crashes with blue screens on a daily basis. I was running ConfigMgr 2012 SP CU 3 and as part of the process I migrated from WS2008 R2 to WS2012 R2.
After many hours of perusing the web, I found the solutions to deal with the common site recovery issues such as SSL certs, and the content validation due to an empty ContentLib folder. I also had the issue with the update source where it listed the old
WSUS 3.2 server and the new one so the Site GUID was also updated.
The issue I am currently experiencing is that packages new or old including software update packages are not working. When using the script by Peter VanWoulde it lists the Deployment State as Error. I have tried redistributing them, valdiating the content,
removing distribution points, adding in new distribution points and even recreating some of the smaller packages to test but nothing is working.
Application deployments are working without issues.
This is the tail end of the WindowsUpdate.log file
2013-11-20 22:03:27:281 1632 a84 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = CcmExec]
2013-11-20 22:03:28:098 1632 a84 COMAPI - Updates found = 176
2013-11-20 22:03:28:098 1632 a84 COMAPI ---------
2013-11-20 22:03:28:098 1632 a84 COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2013-11-20 22:03:28:098 1632 a84 COMAPI -------------
2013-11-20 22:03:32:139 1020 980 Report CWERReporter finishing event handling. (00000000)
This is the UpdatesDeployment.log file
Assignment {FD1118D2-563C-44D4-99DB-0CBE29C5C01A} has total CI = 432 UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Deadline received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Detection job ({F5229872-7A7E-4692-B709-63989F708AF0}) started for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
Progress received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:26 AM 4572 (0x11DC)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:50 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:51 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 3588 (0x0E04)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 2908 (0x0B5C)
At this point I am running out of ideas of where to look.

Hi Xin,
Sorry for not responding earlier but I did recover the site using the guidelines in the following article Backup and Recovery in Configuration Manager,
however there were a few issues.
I did not have a ContentLib backup so all the content had to be redistributed and validated before that worked. None of my packages new or old would work. I eventually found an article from a forum member who also initiated a Site Reset as part of their
recovery process and had no issues.
So it seems that any packages are still not working and i think I narrowed it down.
For some reason even though my DP and MP are all set for HTTPS, it is trying to access the HTTP path for SMS_DP_SMSPKG$. I am using PKI certs so this is the correct path but it should be HTTPS.
Excerpt from log.
Retrying DoUpdateSourceListAll task SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} is installed for user SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Adding 2 local DPs and 0 remote DPs for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Adding install source C:\Windows\ccmcache\5l\ to source list for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
UpdateURLWithTransportSettings(): OLD URL - http://xxxxx.com/sms_dp_smspkg$/p01000ae SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
UpdateURLWithTransportSettings(): HTTP requested but client settings prohibit it. SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Failed source list update for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E}, error 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
DoUpdateSourceListAll task failed, error code 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
Source list update task failed, will be retried after 3600 seconds SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
MSI update source list task finished successfully SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)

[SOLVED] Sound (snd_hda_intel) not working after resume from suspend

Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
Running the following brings back the sound, but that is obviously a hack:
fuser -k /dev/snd/*
rmmod snd_hda_intel
modprobe snd_hda_intel
/etc/rc.d/alsa start
I have on my /etc/modprobe/50-sound.conf:
options snd-hda-intel model=laptop
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
Here's the exact hardware specification:
# lspci -nnv|grep Audio
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Any idea where to look for this?
Last edited by yhager (2009-08-21 16:54:00)

[SOLVED]
I downgraded to kernel 2.6.29 and the problem is gone.
Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

Package not working

I migrated from JDK1.3 to JDK1.4. Paths are set to bin and even classpath is set to c:\jdk1.4\lib;. The program is compiling and running fine.
The problem I come across is that when I use Packages in my program the program would not compile showing that package so and so does not exist and cannot resolve symbol etc. Even the programs that I compiled when I had ver1.3 doesn't seem to compile in JDK1.4. My platform is win2000 Professional. Please help me regarding this.

Thank you for your advice. It went wrong in setting the class path. I set it to c:\j2se1.4.0\lib; This created the problem. I removed this line in the Environment settings and package is working fine now. Thank you for your suggestion anyway.
Yours friendly,
Saravana Kumar. J

Why is the second procedure in my package not working??

Hi I have a package that I want to run every 15 minutes. When I try to run the procedures manually and each one seperately they work. But when I put together these procedures in a package, the second procedure does not work or not updating the table. Any idea why this is creating a problem??
PROCEDURE UPDATE_CS_ACTIVITY is the one in the below package that does not seems working .. but when i run the procedure manually it works fine.
Any help in this regard is greatly appreciated...
Thanx in advance
Here is the Package code:
CREATE OR REPLACE PACKAGE BODY UPDATE_ACTIVITY AS
CSREWORK NUMBER(4);
CSTRACKOUT NUMBER(4);
STARTDATE VARCHAR2(20);
ENDDATE VARCHAR2(20);
PROCEDURE INSERTVALUES IS
BEGIN
DELETE FROM 2DAY_ACTIVITY;
IF SUBSTR(TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS'),12,2) > 18
THEN
STARTDATE := '18:30:00';
INSERT INTO 2DAY_ACTIVITY(STAGESTEPPROD,RESOURCES,CSTRACKOUT)
SELECT "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES",COUNT(TRACKOUTTIME)
FROM "ACT_1DAY_VIEW" "ACT_VIEW"
GROUP BY "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES" WHERE "ACT_VIEW"."TRACKOUTTIME" > SUBSTR(TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS'),1,10)||' '||STARTDATE AND ISREWORKSTEP = 'F';
INSERT INTO WAFER_2DAY_ACTIVITY(STAGESTEPPROD,RESOURCES,CSREWORK)
SELECT "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES",COUNT(TRACKOUTTIME)
FROM "ACT_1DAY_VIEW" "ACT_VIEW"
GROUP BY "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES" WHERE "ACT_VIEW"."TRACKOUTTIME" > SUBSTR(TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS'),1,10)||' '||STARTDATE AND ISREWORKSTEP = 'T';
COMMIT;
ELSE
     STARTDATE := '06:30:00';
     INSERT INTO 2DAY_ACTIVITY(STAGESTEPPROD,RESOURCES,CSTRACKOUT)
SELECT "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES",COUNT(TRACKOUTTIME)
FROM "ACT_1DAY_VIEW" "ACT_VIEW"
GROUP BY "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES" WHERE "ACT_VIEW"."TRACKOUTTIME" > SUBSTR(TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS'),1,10)||' '||STARTDATE AND ISREWORKSTEP = 'F';
INSERT INTO 2DAY_ACTIVITY(STAGESTEPPROD,RESOURCES,CSREWORK)
SELECT "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES",COUNT(TRACKOUTTIME)
FROM "ACT_1DAY_VIEW" "ACT_VIEW"
GROUP BY "ACT_VIEW"."STAGESTEPPROD","ACT_VIEW"."RESOURCES" WHERE "ACT_VIEW"."TRACKOUTTIME" > SUBSTR(TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS'),1,10)||' '||STARTDATE AND ISREWORKSTEP = 'T';
     COMMIT;
END IF;
END INSERTVALUES;
PROCEDURE UPDATE_CS_ACTIVITY AS
BEGIN
INSERT INTO CS_ACTIVITY(STAGESTEPPROD, RESOURCES, CSTRACKOUT, CSREWORK) select MAX(stagestepprod),MAX(resources), max(cstrackout) ,max(csrework) from 2day_activity group by 2DAY_ACTIVITY.stagestepprod,2DAY_ACTIVITY.resources;
COMMIT;
END UPDATE_CS_ACTIVITY;
END UPDATE_ACTIVITY;

You have create global variables CSREWORK and CSTRACKOUT
in your package.
Your have then selected the
max(cstrackout) ,max(csrework) which would probably pick these variables up.
Rename your variables to v_CSREWORK and v_CSTRACKOUT or remove altogether as no sign they are being used which should fix that problem. The normal naming standard for oracle is to name variables with a v_ and parameters with a p_ to prevent problems with naming.

[Partially Solved] wacomcpl is not working

i compiled and installed the latest linuxwacom packages, not from AUR but from the linuxwacom site directly. everything works fine, except i can't get linuxwacom to work, here is what happens:
[cucara@localhost catfish]$ wacomcpl
bash: wacomcpl: command not found
[cucara@localhost catfish]$ /usr/local/bin/wacomcpl
wacomcpl: using TCLLIBPATH="[list /usr/local/lib ]"
Error in startup script: couldn't execute "xsetwacom": no such file or directory
while executing
"exec xsetwacom list"
(procedure "createDeviceList" line 4)
invoked from within
"createDeviceList "
(procedure "createControls" line 8)
invoked from within
"createControls"
(file "/usr/local/bin/wacomcpl-exec" line 1835)
[cucara@localhost catfish]$ /usr/local/bin/wacomcpl-exec
Error in startup script: can't find package LIBWACOMXI
while executing
"package require LIBWACOMXI"
(file "/usr/local/bin/wacomcpl-exec" line 28)
i checked and i do have xsetwacom installed, even though i can't execute just by typing "xsetwacom" at the console (or i get "command not found"), i have to do this:
[cucara@localhost catfish]$ /usr/local/bin/xsetwacom
and i do have a bunch of libwacomxi files intalled:
/usr/local/lib/TkXInput/libwacomxi.a
/usr/local/lib/TkXInput/libwacomxi.la
/usr/local/lib/TkXInput/libwacomxi.so
/usr/local/lib/TkXInput/libwacomxi.so.0
/usr/local/lib/TkXInput/libwacomxi.so.0.0.0
...thats as far as i've gotten. suggestions?
Last edited by originalsurfmex (2008-12-26 04:46:30)

ok i figured out the problem:
when installing from source i used prefix=/usr/local , as suggested by arch linux wiki (for installing from source)
howerver this puts wacomcpl and the other executables in /usr/local/bin folder and they don't work from there.
so i had to copy those files into /usr/bin to make them work.
what would be the proper way to install this with the binaries going directly into /usr/bin?

Solved - Helix pen not working

I think this might be helpful to those who suffer she same problem: My OS is Windows 8.1. One day the pen just stoped working. Seems that there was no problem with hardware and driver - nothing wrong but the pen. Then another day my Norton, which was pre-installed on my Helix, expired and I decided to unistall it. Surprisingly after uninstallation the pen started to work!

Tried it in the BIOS, looks like it's a hardware problem. Lenovo service was surprisingly quick and direct on the phone. They provided me the option of sending it in (with a 7 day turnaround), or taking it to a local warranty service center (on Long Island). I'll check out the local center first tomorrow.
mdovey wrote:
Try booting into BIOS and seeing if the pen works there (although the BIOS is text based it will respond to touch and pen inputs, e.g. you can select the various menus screens by touching the text with the pen).
If the pen does work in BIOS, then the problem is probably software\driver related and reinstalling\refreshing Windows should solve the problem.
If the pen does not work in BIOS, then the problem is probably hardware related and you will need to contact Lenovo support to arrange a repair\repacement.
Matthew
mdovey wrote:
Try booting into BIOS and seeing if the pen works there (although the BIOS is text based it will respond to touch and pen inputs, e.g. you can select the various menus screens by touching the text with the pen).
If the pen does work in BIOS, then the problem is probably software\driver related and reinstalling\refreshing Windows should solve the problem.
If the pen does not work in BIOS, then the problem is probably hardware related and you will need to contact Lenovo support to arrange a repair\repacement.
Matthew

[SOLVED] pacman is not working!

Hey guys,
I'm trying to remove kdemod or any of the apps that were installed with it by using this command:
pacman -Rsu kdemod
Here's what happens next, i copied from my console:
[root@rocketship ~]# pacman -Rsu kdemod
kdemod not found, searching for group...
:: group kdemod:
kdemod-common kdemod-kdebase kdemod-kdebase-runtime
kdemod-kdebase-workspace kdemod-kdegraphics-common kdemod-kdelibs
kdemod-kdemultimedia-common kdemod-kdenetwork-common
kdemod-kdepim-akregator kdemod-kdepim-common kdemod-kdepim-kmail
kdemod-kdepim-knotes kdemod-kdepim-korganizer kdemod-kdepimlibs
kdemod-kdeutils-common kdemod-oxygen-icons kdemod-xkit qtmod
qtmod-phonon
Remove whole content? [Y/n] y
checking dependencies...
warning: removing kdemod-kdebase-runtime from target list
warning: removing kdemod-kdebase-workspace from target list
warning: removing kdemod-kdebase from target list
warning: removing kdemod-kdelibs from target list
warning: removing kdemod-kdepimlibs from target list
warning: removing kdemod-kdegraphics-common from target list
warning: removing kdemod-kdemultimedia-common from target list
warning: removing kdemod-kdenetwork-common from target list
warning: removing kdemod-kdepim-common from target list
warning: removing kdemod-kdepim-kmail from target list
warning: removing kdemod-kdepim-akregator from target list
warning: removing kdemod-kdepim-knotes from target list
warning: removing kdemod-kdepim-korganizer from target list
warning: removing kdemod-kdeutils-common from target list
warning: removing qtmod from target list
warning: removing qtmod-phonon from target list
warning: removing opencv from target list
warning: removing xine-lib from target list
warning: removing libssh from target list
warning: removing libcaptury from target list
warning: removing lm_sensors from target list
warning: removing polkit-qt from target list
warning: removing capseo from target list
warning: removing kdemod-oxygen-icons from target list
warning: removing kdemod-xkit from target list
warning: removing polkit-kde from target list
warning: removing sane from target list
warning: removing exiv2 from target list
warning: removing qca from target list
warning: removing kdemod-common from target list
warning: removing openexr from target list
warning: removing strigi from target list
warning: removing soprano from target list
warning: removing attica from target list
warning: removing shared-desktop-ontologies from target list
warning: removing tunepimp from target list
warning: removing cyrus-sasl-plugins from target list
warning: removing kdemod-libindicate-qt from target list
warning: removing akonadi from target list
warning: removing cyrus-sasl from target list
warning: removing openldap from target list
warning: removing boost from target list
warning: removing mysql from target list
warning: removing postgresql-libs from target list
warning: removing libmysqlclient from target list
warning: removing kdemod-libindicate from target list
warning: removing rrdtool from target list
warning: removing libdc1394 from target list
warning: removing ilmbase from target list
warning: removing libieee1284 from target list
warning: removing clucene from target list
warning: removing redland from target list
warning: removing libiodbc from target list
warning: removing virtuoso from target list
warning: removing libofa from target list
warning: removing libusb1 from target list
warning: removing fftw from target list
warning: removing mysql-clients from target list
warning: removing raptor from target list
warning: removing rasqal from target list
Do you want to remove these packages? [Y/n] y
[root@rocketship ~]#
So right after I press "y" to remove the packages, nothing happens. The packages remain on the system. I want to remove these packages, then re-install Gnome so any packages that it might need are re-installed just in case. I've done this on other systems after deciding which Desktop Environment i liked better. But in this case, pacman is just not working!
I'm stumped. Any ideas?
Last edited by trusktr (2010-03-25 20:07:53)

Alright, so it's not working without the u option as well .:B:..
Here's what I'm getting:
[root@rocketship ~]# pacman -Rs kdemod
kdemod not found, searching for group...
:: group kdemod:
kdemod-common kdemod-kdebase kdemod-kdebase-runtime
kdemod-kdebase-workspace kdemod-kdegraphics-common kdemod-kdelibs
kdemod-kdemultimedia-common kdemod-kdenetwork-common
kdemod-kdepim-akregator kdemod-kdepim-common kdemod-kdepim-kmail
kdemod-kdepim-knotes kdemod-kdepim-korganizer kdemod-kdepimlibs
kdemod-kdeutils-common kdemod-oxygen-icons kdemod-xkit qtmod
qtmod-phonon
Remove whole content? [Y/n] y
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: kdemod-kdeaccessibility-common: requires kdemod-kdebase-runtime>=4.4.0
:: kdemod-kdeadmin-common: requires kdemod-kdebase-runtime>=4.4.0
:: kdemod-kdeartwork-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdebase-doc: requires kdemod-kdebase>=4.4.0
:: kdemod-kdebase-kwrite: requires kdemod-kdebase>=4.4.0
:: kdemod-kdebase-runtime-doc: requires kdemod-kdebase-runtime>=4.4.0
:: kdemod-kdebindings-common: requires kdemod-kdelibs>=4.4.0
:: kdemod-kdebindings-common: requires kdemod-kdepimlibs>=4.4.0
:: kdemod-kdeedu-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdegames-common: requires kdemod-kdelibs>=4.4.0
:: kdemod-kdegraphics-doc: requires kdemod-kdegraphics-common>=4.4.0
:: kdemod-kdegraphics-kolourpaint: requires kdemod-kdegraphics-common>=4.4.0
:: kdemod-kdelibs-doc: requires kdemod-kdelibs>=4.4.0
:: kdemod-kdemultimedia-doc: requires kdemod-kdemultimedia-common>=4.4.0
:: kdemod-kdemultimedia-juk: requires kdemod-kdemultimedia-common>=4.4.0
:: kdemod-kdemultimedia-thumbnailers: requires kdemod-kdemultimedia-common>=4.4.0
:: kdemod-kdenetwork-doc: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdenetwork-kppp: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdenetwork-krdc: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdenetwork-krfb: requires kdemod-kdenetwork-common>=4.4.0
:: kdemod-kdepim-akonadiconsole: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-doc: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kalarm: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kjots: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-knode: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-kmail>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-akregator>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-knotes>=4.4.0
:: kdemod-kdepim-kontact: requires kdemod-kdepim-korganizer>=4.4.0
:: kdemod-kdepim-ktimetracker: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdepim-wizards: requires kdemod-kdepim-common>=4.4.0
:: kdemod-kdeplasma-addons: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdeplasma-addons: requires kdemod-kdepimlibs>=4.4.0
:: kdemod-kdesdk-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdesdk-common: requires kdemod-kdepimlibs>=4.4.0
:: kdemod-kdetoys-common: requires kdemod-kdebase-workspace>=4.4.0
:: kdemod-kdeutils-doc: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-kdf: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-kfloppy: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-ktimer: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-okteta: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-printer-applet: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-superkaramba: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdeutils-sweeper: requires kdemod-kdeutils-common>=4.4.0
:: kdemod-kdewebdev-common: requires kdemod-kdepimlibs>=4.4.0
:: qimageblitz: requires qt>=4.4.3
:: qscintilla: requires qt
:: qtmod-doc: requires qtmod=4.6.2
:: qtmod-phonon-gstreamer: requires qtmod-phonon>=4.3.80
:: qtmod-phonon-mplayer: requires qtmod-phonon>=
:: vlc: requires qt
If i try the previous Rsu version again i get the same as the first example I showed.
Do you think it's poosible i have to re-install kdemod first then proceed to uninstall everything?
Last edited by trusktr (2010-03-24 22:33:08)

[SOLVED] Rosgarden package not working

Similar Messages

Maybe you are looking for