[SOLVED] Samba cannot access shares after upgrade

After upgrading samba and smbclient from 4.0.6-1 to 4.0.7-3 I can no longer connect to shares or authenticate with server in general.
Cannot establish new connections. Already connected ones still works.
Downgrading samba to 4.0.6-1 does not change that.
Downgrading smbclient to 4.0.6-1 returns everything back to normal.
I did reload daemons and restart samba.
sudo systemctl --system daemon-reload
sudo systemctl reload-or-restart samba.service
Am I missing something?
Logs reveal this error, which I did not find anywhere.
/var/log/samba/log.smbd:
[2013/07/17 14:50:45.729619, 0] ../source3/auth/auth.c:380(load_auth_module)
load_auth_module: can't find auth method samba4!
Last edited by liepumartins (2013-07-29 08:47:21)

Removed samba completely and installed again.
sudo pacman -R sama smbclient
sudo pacman -S samba
After this Samba did not start, like it used to before. Important bit of error message:
/usr/bin/samba: error while loading shared libraries: libwinbind-client.so: cannot open shared object file
So I did reinstall for some dependencies, that I thought might be responsible.
sudo pacman -S libwbclient libldap ldb libaio libbsd
Most likely it would be enough with libwbclient and libldap.
I will mark this as solved.
Last edited by liepumartins (2013-07-29 08:57:31)

Similar Messages

  • Cannot access internet after upgrading to IOS 6.1.2 on iphone 4

    cannot access internet after upgrading to IOS 6.1.2 on iphone 4.

    ok here is the issue.
    After i upgraded the IOS to IOS 6.1.2 I'm not able to use mobile internet as i have a data sim card.
    As the settings provided by the service provider are not compatible with IOS 6.1.2 and the service provider cannot do anything about it, as it's something that has to be ressolved by apple.

  • Cannot access mail after upgrading from tiger to leopard

    When I accessed Mail from applications after installing leopard I received the following message "You cannot use this version of the application Mail with this version of MacOSX" any advice please?

    Hello Hannah:
    Welcome to Apple discussions.
    I think we need a bit more information.
    What method did you use to upgrade?
    What Mail level is on your system (highlight the Mail icon in your application folder and then +"get info.")+
    Barry

  • Cannot access Aperture after upgrade

    Hi, does anybody know how to re install aperture 3-1-2 that is not recognised on OS X Yosemite. I have tried upgrading since, but this didn't work.
    Are my pictures and Raw files retrievable? I am willing to buy Aperture again as a last resort, but will i still get my files back.
    Does anyone know an alternative please. Thanks Andy.

    Hi, does anybody know how to re install aperture 3-1-2 that is not recognised on OS X Yosemite.
    Did you buy Aperture 3.1.2 from the AppStore, or do you have a version with a serial number?
    The update to Aperture 3.6 is only available from the App Store. Before you can use the AppStore update, an Aperture version with a serial number has to be associated with your AppleID. This was easier, when Mavericks and the Aperture 3.5.1 update came out.
    Install Aperture 3.1.2, even if it will show a crossed out icon.
    Then launch the AppStore, sign in with your AppleID and look at the "Purchases" tab. Is Aperture listed as "Accept"? Or showing on the Updates page?
    If you do not see it at the Purchases tab, quit the AppStore again, then make sure, the Language&Region" in the   System preferences are set to English USA, restart your Mac and try again.  This worked for some forum members, to get the update to show at the AppStore.
    If all fails, contact Apple Support and ask for a redeem code, so you can download Aperture 3.6 for free:
    You will need to provide a proof op purchase of Aperture and insist to talk to the manager.
    Use this link: http://www.apple.com/support/mac/app-store/contact/
    Apple sent redeem codes for Aperture 3.6 to several users who had bought the version on disks, if they could provide a serial number, so they could download the update for free.  See for example this discussion: (The post marked as the solution)
    Re: Aperture update not possible after update to Yosemite
    It is really unfortunate you missed the window of opportunity with Mavericks MacOS X 10.9.5, when the update was easy.

  • Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

    Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
    Library Upgrader IS NOT WORKING. Please help

    Thx Leonie,
    Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
      <key>OSBuild</key>
      <string>10.10.2:14C109</string>
      <key>appRecords</key>
      <array>
      <array>
      <string>AppRecord</string>
      <string>DiskImageMounter</string>
      <string>com.apple.DiskImageMounter</string>
      <string>396</string>
      <string>10.10.1</string>
      <integer>7</integer>
      <integer>0</integer>
      <integer>1</integer>
      <integer>0</integer>
      <integer>0</integer>
      <integer>0</integer>
      <integer>0</integer>
      <integer>0</integer>
      </array>
      <array>
      <string>AppRecord</string>
      <string>com.apple.ncplugin.weather</string>
      <string>com.apple.ncplugin.weather</string>
      <string>32.3</string>
      <string>1.0</string>
    As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
    I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
    Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

  • Cannot view msgs after upgrading to IOS8

    Cannot view msgs after upgrading to IOS8..I get the msgs but cannot open them..the screen just goes blank
    I tried restarting..back up ..using a different sim..everything but nothing is working
    can anyone help urgently its affecting my business big time
    Thanks

    I am having this same issue. I live in Korea and changing the language to Korean made the messages searchable, but when I changed back to  English, the problem returned and I was unable to search all my messages via the search window in the messages app, but then, after about 5 minutes, the messages app crashed, and after that, the problem was resolved. Gotta sat that I'm so far unimpressed with ios 8; seemingly not ready for Primetime.

  • E4200 Can't see my network shares after upgrade

    I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
    I did downgraded the firmware back to .01 but still no network .
    Any help ?

    After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
     Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
    After reset, reconfigure the router and then check the connectivity status…

  • Cannot access iphoto after installing Yosemite

    cannot access iphoto after installing Yosemite
    My icon for iPhoto has a X thru it when I try to re install through app store nothing happens

    what version of Iphoto are you running there is an update available ver9.6

  • Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

    Is anyone having trouble with accessing email after upgrading to iOS 6?

  • Cannot access iPhoto after Maverick upgrade

    After upgrading to OSX 10.9.1, I am unable to access my photos. I get an error message stating that the photos are on a locked disk. It tries to repair teh access but top no avail. I can view my photos on my phone.

    Your phone access to photos is strictly on your phone.   It sounds like you put your photos on another account, or an external hard drive that doesn't have the right permissions.  You could sync up the photos from your phone to your computer, but that requires these steps:
    https://discussions.apple.com/thread/4252343
    The Pictures folder should not be outside your Users -> yourname -> folder.  Otherwise iPhoto generally won't know where to find it, without a rebuild of the library.  If you did put it outside of there, command-option keys need to be held simultaneously while launching iPhoto, and locate the iPhoto Library xml file in the folder that has your library once it asks you to relocate the folder.

  • Can no longer connect to certain shares after upgrading to 10.8.4

    After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
    When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
    I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
    Can anyone help?
    Thanks!
    Jon

    No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
    The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

  • Cannot search messages after upgrading to iOS7!!!

    After upgrading my iPhone4 to iOS7 today, I noticed that it cannot search SMS Messages for information. To be exact, it only searches messages that have been sent/received after the upgrade. It seems it hasn't cached older messages and keeps ignoring them when searching for something. Any help? Is it a bug?

    Same problem here with 4S updated to IOS 7 via OTA.
    I have solved the problem by connecting the phone to Itunes, backing up, re-installing IOS7 and restoring from the backup.
    Now everything is fine and all messages are indexed.
    I hope this helps!
    F.

  • Cannot open mail after upgrading to leopard

    I cannot open mail after I upgraded to leopard. I keep getting this message that "mail has unexpectadly quit. I have sent reports to apple. Does anyone have any suggestions?

    5.1.4 will solve the compatibility issue, however, it is no longer available from Apple -you would have to find a copy on Ebay or similar. The current version is FCP 6 -part of Final Cut Studio 2.
    Going back to Tiger will also solve it and will not cost anything, apart from the time spent reinstalling.
    Unless there is some feature in Mac OS X 10.5 that you really need, this would be the easiest way to get FCP running again.

  • SAP cannot start Oracle after Upgrading to 10g

    I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
    the following log are in startdb.log. Please give me an idea what to do to solve this problem.
    S27adm 22> more startdb.log
    Mon Jun 2 13:00:22 GMT: 2008
    LOGFILE FOR STARTING ORACLE
    Mon Jun 2 13:00:22 GMT: 2008
    checking required environment variables
    ORACLE_HOME  is >/oracle/S27/102_64<
    ORACLE_SID   is >S27<
    Mon Jun 2 13:00:22 GMT: 2008
    check initora
    Mon Jun 2 13:00:22 GMT: 2008
    check initora
    Mon Jun 2 13:00:22 GMT: 2008
    checking V2 connect
    TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
    Copyright (c) 1997, 2005, Oracle.  All rights reserved.
    Used parameter files:
    /oracle/S27/102_64/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
    SERVICE_NAME = S27.world)))
    OK (0 msec)
    tnsping: V2 connect to S27
    Mon Jun 2 13:00:22 GMT: 2008
    Connect to the database to check the database state:
    R3trans: connect check finished with return code: 12
    Database not available
    Mon Jun 2 13:00:22 GMT: 2008
    Shutdown database
    First trying to shutdown the database - May be,
    the database is in the nomount or mount state
    Mon Jun 2 13:00:22 GMT: 2008
    starting database
    SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 2533359616 bytes
    Fixed Size                  2199816 bytes
    Variable Size            2025713400 bytes
    Database Buffers          503316480 bytes
    Redo Buffers                2129920 bytes
    Database mounted.
    SP2-0158: unknown SET option "charwidth"
    no rows selected
    Not a terminal
    Not a terminal
    Database altered.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning and Data Mining options
    Mon Jun 2 13:00:46 GMT: 2008
    Connect to the database to verify, that the database is now open
    R3trans check finished with return code: 12
    ERROR: Startup of database failed
        Notify Database Administrator.
    Mon Jun 2 13:00:46 GMT: 2008
    /usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2

    Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
    If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
    Good Luck
    Nag Anthati

  • Epson xp-410 cannot be located after upgrade, connected via usb

    after upgrade to Yosemite, cannot print, looking deeper, message says printer cannot be located.  It is connected via USB.  I am very confused.

    Hi,
    First
    Please Download and run the Printer doctor tool to find and fix your problem
    http://ftp.hp.com/pub/softlib/software12/COL50849/​mp-135113-1/HPPSdr.exe
    If you still have the issue then,
    The detailed description of troubleshooting steps has been given in below link. Click on the windows XP link and follow the steps.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02266743&tmp_task=solveCategory&cc=us&dlc=en&lc​...
    Happy Printing
    Click on the "Thumbs up"button on the left to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

Maybe you are looking for

  • Need to convert the binary data in blob field to readable format

    Hi, We need to convert the Binary data in the BLOB field to readable format and need to display it in Oracle Apps Environment,does anybody come across the similar requirement. please advise, thanks in advance. Regards, Babu.

  • What is wrong in this trigger

    Hello All, please tell me whats wrong in the following trigger, what effectively i am trying here is I wanted to insert the old records before update to a temporary table, if this is not the way, then what is the correct way. SQL> desc ttt1; Name Nul

  • Mail.jar is locked when sending a mail using servlet and not releasing

    Hi everybody, The mail.jar is locked in tomcat while sending the first message and not released until the tomcat get restarts. the problem is not recorded in any logs. 1. Please create a servlet that sends mail 2. Send a mail to any mailid 3. then af

  • Runtime error in menu using javascript

    i got a code for building menu using javascript from internet. But when run this file, it gives a runtime error stating Error: 'Trigger' is null or not an object.I am not able to rectify it. Can you please help me with this problem? Its very urgent..

  • Networking OS X to Windows 7

    Evening all, I have been reading up on this and still seem to miss something.... I have a PC running Windows 7, due to issues with trying to make my printer wireless, it is also my print server.  The printer is connected and shared using this PC as a