[SOLVED - sort of]help with missing readline.h

Hi,
I wish to get some help. I'm trying to build the newest Piklab package but cmake complains about missing readline header. However, readline.h is in /usr/include/readline among the other headers. My installation is 64-bit but I can run 32 bit programs (lib-32glibc installed).
Any ideas?
Last edited by putki (2012-05-12 13:34:24)

I found that piklab-0.15.12.tar.bz2 is somehow broken. I replaced its FindReadline.cmake with the same file taken from  piklab-0.15.10.tar.bz2 and it built nicely on 32 bit ubuntu. However, I encountered a problem. Build on 64 bit arch stops due some other error:
/home/hp/piklab-0.15.12/src/common/port/hid_port.cpp: In static member function 'static bool Port::HID::getDeviceIds(uint, uint&, uint&)':
/home/hp/piklab-0.15.12/src/common/port/hid_port.cpp:52:3: error: '::close' has not been declared
/home/hp/piklab-0.15.12/src/common/port/hid_port.cpp: In member function 'virtual void Port::HID::internalClose()':
/home/hp/piklab-0.15.12/src/common/port/hid_port.cpp:136:5: error: '::close' has not been declared
make[2]: *** [src/common/port/CMakeFiles/port.dir/hid_port.o] Error 1
make[1]: *** [src/common/port/CMakeFiles/port.dir/all] Error 2
make: *** [all] Error 2
I guess it won't compile on 64 bit Arch... I'll give up!
Thanks

Similar Messages

  • [SOLVED] VIM - need help with keymapping

    As the header says, I need help with creating a key mapping in my vimrc. What I would like is a
    mapping to<F8> that would toggle between " :set paste and :set nopaste. " Any and all help
    would be appreciated
    Last edited by orphius1970 (2010-03-02 07:50:22)

    YES!!!!  Thank you! Exactly what I was hoping for. I am new to vim so all these config options
    are a little intimidating for now. Thank you again!!!!

  • Help with missing emails

    Hello.  New to this, so apologies if I'm in the wrong place.  I've not been receiving certain emails for quite some time now.  One sender is Tesco.  The customer services assistant told me there is no reason at their end why I shouldn't be receiving them and I should let BT know as it may be their problem.  Any idea who or which department I contact at BT?

    Here is another Tesco one.
    http://community.bt.com/t5/Other-BB-Queries/Not-receiving-emails-from-tesco-mobile/m-p/1065812#M6873...
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Help with missing HD space please

    I have a powerbook with the 1.67GHz G4.
    I was deleting free space in the Disk Utility program from my main(only) HD. I recall that when i started the procedure i had about 20GB free space on the drive. Well, i tried the 7-times over write option, but after about and hour or so i had to do some other things on the computer and canceled the program.
    After this my computer started giving me out of space warnings and i checked and now my computer has about 500MB of free space.
    I can only assume that some temporary file that was supposed to be deleted at the end of the wipe was not deleted and is now hogging space on my drive. A cursory look at the file sizes of folders in my root directory via the finder didnt show anything untoward.
    Any ideas what is the solution to getting my space back?
    I ran repair permissions and verify disk and the space is still gone

    *I can only assume that some temporary file that was supposed to be deleted at the end of the wipe was not deleted and is now hogging space on my drive. A cursory look at the file sizes of folders in my root directory via the finder didnt show anything untoward.*
    It might be a hidden file.
    You can look in the terminal for files bigger then 24meg or so.
    Macintosh-HD -> Applications -> Utilities -> Terminal
    sudo find / -size +50000 -exec ls -lh {} \;
    enter your logon password & I assume you are running as administrator.
    This will give you a few errors when you scan the /dev directory. I'd disconnect any external harddrives.
    man find
    for details.
    You can also use whatsize to find large files.
    WhatSize is a simple tool that allows the user to quickly measure the size in bytes of a given folder and all subfolders and files within it. You would be surprised at to how many useless files might be laying around on your hard disks. The files and folders are automatically sorted by size, with the biggest sizes first. See:
    http://www.macupdate.com/info.php/id/13006/
    Also...
    Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
    http://monolingual.sourceforge.net/
    A detailed write-up on how to use Monolingual:
    http://www.jklstudios.com/misc/monolingual.html
    Robert

  • Need help with Missing Sync

    Hi Guys
    I have a Treo 650 and I use missing sync. It was working fine when I was syncing with address book and iCal. I wanted to use Entourage and I followed some instructions and then I moved the Entourage conduit to Conduit folder and now it syncs with Entourage although not perfect. I want to switch back to address book and iCal but the missing sync is not working properly. I would appreciate any help in this regard.
    Vijay

    In Hot Sync,
    Bring down the options menu (the key with the lines and down arrow).
    Go to Connection Setup, New, and choose Connect To: "PC". Via: "Bluetooth". You can choose a name for this connection.
    Go back to the main Hot Sync screen.
    With "Local" highlighted, you should have a menu below the hot sync icon and your connection name should be listed.
    Make sure that is your chosen connection when you sync and you shouldn't have to go through the setup each time.

  • Help with missing files in Elements 3

    I am not a computer wizard an dI am trying to catalogue my digital photos. I have almost 2,000 photos in Photoshop elements.All the photos are in the browser and I have created folders for each holiday, wedding, graduation etc. and copied photos into them. Suddenly a lot of the photos have a red rectangle on the bottom of them with a jagged line running diagonally across them which I have now learned means that there is a missing file. I have tried to reconnect the missing file following the help program but nothing happens except the 'torch' searching for the file. I can't do anything with these photos, I can't edit them or print them of copy them to a flash drive as back up. All these photos are precious and I can still see the image in teh browser. Have I lost them?

    OK I consider myself severely reprimanded!
    Sorry to appear dim but all I have ever done is:
    1 open photoshop elements
    2. take the card out of my camera
    3. put it into my computer.
    4. click 'get photos'
    5.save photos to my browser
    6. create new folders as previously described.
    Photoshop Elements toolbar has the camera to 'get photos' so that's what I did, I didn't put them anywhere else first and then copy them into there.
    The photos in my browser and the copies in my folders all have the 'missing file' icon so I can't drag the folder one back into the browser it just keeps saying 'missing file'. Plus some photos I haven't copied to folders also show the same icon. Can I say goodbye to my photos or are they there somewhere but I just can't find them? I haven't deleted anything.

  • Help with missing libutil.dylib file

    I am struggling to find out much about this file that appears to be missing from my mac 10.4.11.
    When I try and load an application a terminal file opens with the following information.
    Last login: Sun Oct 4 17:12:13 on ttyp1
    /Users/AJ/Desktop/British\ TV; exit
    Welcome to Darwin!
    localhost:~ AJ$ /Users/AJ/Desktop/British\ TV; exit
    dyld: Library not loaded: /usr/lib/libutil.dylib
    Referenced from: /Users/AJ/Desktop/British TV
    Reason: no suitable image found. Did find:
    /usr/lib/libutil.dylib: file to short
    /usr/lib/libutil.dylib: file to short
    Trace/BPT trap
    logout
    [Process completed]
    I basically created a txt file and renamed it libutil.dylib, which explains why it says 'file to short'.
    Prior to this is just stated that libutil.dylib could not be found.
    Can anyone help me to overcome this problem? I would really appreciate resolving this issue.
    Many thanks in advance!

    Use Pacifist to extract that item from the Mac OS X 10.4 DVD or updater as needed.
    (47858)

  • Help with missing buttons

    Upgraded to version 32. I'm missing the 3 dot menu button, but do have hardware menu button. When I press on hardware menu, I do NOT have an option to go to tools. It doesn't look the picture they show when I searched for help. As a matter of fact, when pressing menu, it looks like the old version I had. did something not update properly, or could the new version not be compatible with HTC inspire? is appreciate any help thanks so much

    You need to reinstall Firefox from Play Store , Enable Sync first then wait for sync to finish synching then uninstall and reinstall
    Please note : uninstalling without sync enabled will cause to loss all your data including form data,passwords, usernames,history and bookmarks

  • Help with missing/replaced library

    I recently upgraded to iphoto 08. I had all my 07pics so I wanted to save them in my external harddrive to free up space so I made a copy of my iphoto library and saved it to my external hard drive.
    I was recently traveling and did not have my external hard drive with me. I had some new pics I wanted to upload so when I did it said it could not find my library and asked me if I wanted to create one. I said yes and it put all my new pics in my iphoto. When I got back home and hooked up my external hard drive I didnt get any new edits... when I went to look in my external harddrive for my 07 pics...my iphoto library there had been replaced with the new content as well and my 07 pics are missing..?
    Any Idea where my other pictures are and how I can access them.
    I dont think they are gone because I made an imovie using some of those pics and the pics are still availabe in my imovie (but not my library).
    Any help is appreciated... Barbi..

    Barbi:
    It appears that you currently have two libraries, one on your laptop with the most recent photos and the original one on the external HD. To open one or the other launch iPhoto with the Option key depressed, and when asked, select the option to Choose Library. Navigate to the library you want to open and select it. Or you can use the free version of iPhoto Library Manager to quickly move between libraries.
    If you want to copy your photos from the laptop library to the external HD library you can use the paid version of iPLM to do that and that will preserve any keywords, title changes or comments.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • I Need Help with Missing Video in imovie!

    Hello, I have a MacBook Pro.  I made a few video's with my students in imovie and now it seems as though the clips are all missing. I can see the clips but there is a yellow triangle with an exclamation mark on all of them and I can not play or hear them.

    This thread may help, but please use caution and back up. PList Edit Pro is no  longer free, but you can still find it I think. You might be able to get an evaluation copy.
    https://discussions.apple.com/message/12959640#12959640
    https://discussions.apple.com/message/15928860#15928860
    https://discussions.apple.com/message/10813634#10813634

  • SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM

    i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
    I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
    Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
    can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
    Using XP home, all updates installed... latest itunes,

    It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
    http://discussions.apple.com/thread.jspa?messageID=11161893&#11161893
    Regards.

  • Need help with missing hotmail folders?

    I'm missing folders from Hotmail when moving into Mail on my iMac using 10.8. The Hotmail inbox comes up, but not other folders that I've created. I also have an iPad; all the foldes came up in it. Does anyone have a clue?

    Niel,
    I think I must have done something wrong. I printed out your instructions, then quit Safari and did as directed, after which both the "Old Safari" and the new Safari folder (with the old files dragged to it) appeared in ~Library/. Since the Old Safari folder was now empty, I put it in Trash, then opened Safari again--and discovered that all my bookmarks were gone (Preferences were exactly as before).
    Thinking I could just put things back the way they were, I quit Safari and copied the files in the new "Safari" folder, then pulled "Old Safari" out of Trash, placed the originals back in "Old Safari," and renamed it "Safari," as before. (I renamed the new Safari file, which now contains the copies, "Safari-Copy.") However, the bookmarks didn't reappear in the application.
    Hoping I could restore them from the Library folder, I looked for "Import" in the File menu because I had just imported my bookmarks to a new MacBook with OS 10.4, but I guess OS 10.3.9 doesn't have that feature. I can restore the bookmarks manually from the other computer, but it will take a long time. Do you know if there's a way to undo whatever I did wrong and get my bookmarks back?

  • Please help with "Missing File" on iMovie 10.0.2!

    After importing clips from my GoPro to iMovie 10.0.2, the clips along with others in the same events are not available. The preview screen and thumbnail both say, "Missing File." Many of the clips that are now "missing" were uploaded and edited months ago

    Beat markers are not included in iMovie 10. Another nice feature that has gone missing in this upgrade.

  • Help with "Missing Files" message

    My blog has been giving me an error message when I open it: "The following errors occurred when trying to open this document", "Missing file 'Pinstripewelcometile-15.jpg". It's one of the background pinstripe graphics for the "formal" theme that has an "x" and a question mark - it's used on all the entry pages. (http://web.me.com/mikejdunlap/Site/BLOG/Entries/2010/4/27ChocablockCookies.html) I've added new pages and republished, but the "number" of the missing graphic keeps changing every time I open iWeb: "welcomepinstripe15.jpg" etc - I think it started at "_9.jpg". I can't "replace" the file or add them again to my page - since it's a template graphic, rather than my own that I can choose in the media browser. How do I get iWeb to put this background image back in the entry pages? Thanks in advance for any help!

    UPDATE: I restarted my computer and went through the exact same process outlined above and now it looks like it resolved itself; the error message no longer appears after I turn sync back on. I believe everything is working correctly now. Basically, it looks like the solution is to completely reboot your computer.

  • Help with missing font matter

    The problem started after adopting Windows 7 OS.  I have many manuals written in previous version of InDesing which some Type 1 fonts were used.
    In my Windows 7, there is no type 1 fonts  (furthermore, Type 1 fonts are not compatible with Win 7).  So all fonts wirtten in Type 1 were replaced with TTF.   But when I open those indd files, I am getting a missing font error (see the attachment).  In all of my indd files, there is no more fonts written in Times T1 fotns.  I could not get rid of this error dialog box.  Could someone advise me how to fix this problem?  This drives me nuts.  hummer

    > it's usually defined in [Basic Paragraph].
    Again, all T1 fonts and anything written in T1 were purged already.
    The issue could be Basic Pargaph.   This is sometnhing I should look into.
    Where or how to find Baisic Paragraphy?   I lost in the unfamiliar lingo, Basic Paragraph.

Maybe you are looking for