[SOLVED] Sound no longer working

I'm using alsa in gnome3 and wheen I look at the sound tab in gnome3's settings nothing looks awry.
Thanks in advance,
xrendan
Last edited by xrendan (2011-08-08 05:28:24)

nevermind I just made a stupid mistake i accidentally set my sound to input only instead of input/output but thanks anyway

Similar Messages

[SOLVED]Sounds no longer works after kernel update (Audigy 4)

Updated kernel along with other updates. I have an audigy 4 (detected as audigy 2, always been that way).
It's detected if I do lspci, if I go in alsaconf it also detects it and says it should work, but if I then go in alsamixer it just comes up with my USB webcam sound mixer.
What am I doing wrong? I can't get any sound anymore and I don't even know how to start fixing it.
I also checked lsmod and the module was loaded (emu10k1), it should work, but it doesn't.
Any ideas?
Edit: Trying to launch MPD:
speng@spengpc ~ $ mpd
output: No "audio_output" defined in config file
output: Attempt to detect audio output device
output: Attempting to detect a alsa audio device
ALSA lib pcm_dmix.c:1008:(snd_pcm_dmix_open) unable to open slave
alsa: Error opening default ALSA device: No such file or directory
output: Attempting to detect a oss audio device
oss: Error opening OSS device "/dev/dsp": Invalid argument
oss: Error opening OSS device "/dev/sound/dsp": No such file or directory
output: Unable to detect an audio device
Aborted
Last edited by speng (2009-08-21 02:10:39)

Speng, perhaps there are two sound devices on your system?.. What are the contents of /dev/snd/?
Efish, your issue is different, you've got a different card, right? And I don't get what the issue is, exactly. /etc/modprobe.d/*sound.conf?

HT204266 The sound no longer works on my ipad?

The sound no longer works on my iPad although when I put headphones in it does. When I press the volume button it comes up as "sound effects" but with no dots that would normally go up or down. When I double click the start button there is the normal volume bit but no button to move up or down. Has anyone ever had this before?

The disappearing sound is typically one of three things that could be going on. Read this and see which one applies to your situation.
1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol.

Sound no longer working after graphics card installation

Okay, so my problem is:
I recently added a graphics card to my windows 8.1 PC. The card itself works fine (a GTX 750Ti), but since installing it my sound no longer works from either port. Things I have already tried:
Rebooting (obviously)
Taking the card out and then replacing it
Going through all the control panel audio settings (more on this later)
Disabling the HDMI audio on the card
Trying different (provably working) speakers and headphones
Updating/installing drivers (not that you need them for headphones)
The "playback devices" screen declared that nothing whatsoever is plugged in (it is). I'm concerned I might have damaged something during installation, but nothing seems obviously damaged, and I would have expected static to either do no damage
or wipe out the entire motherboard. The back port is working, so it isn't the cable. My monitor output is HDMI (with no speakers on the monitor), if that makes any difference.
Penny for anyone's thoughts?

The back port is working, so it isn't the cable.
I’m confused as to what this means. If you have audio via the ports on the back of the computer but not in front ports you may have damaged the front audio cable or connection on the motherboard
or at the front ports. Find the HD Audio (or AC’97) port on your motherboard and verify that the cable is connected and intact, then follow this cable forward to your front audio ports. If you stressed this cable by tugging or pushing, it could have damaged
the connection to the front ports. Sometimes these ports are connected by a header like the motherboard and this connection could have come loose.
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

The sound no longer works in my husband's iPad and it keeps shutting itself down. This started today. We checked all the settings and everything looks right. Is there something we might be missing?

The sound no longer works in my husband's iPad and it keeps shutting itself down. This started today. We checked all the settings and everything looks right. Is there something we might be missing?

Try a reset first: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
If the reset doesn't fix it, try a restore:
http://support.apple.com/kb/HT1414

My sound no longer works, my sound no longer works

Since i downloaded new OS my sound no longer works, this if for itunes, spotify and trying to listen to youtube videos

I just found out that a few of my slideshows have the music intact. For the rest, it looks like I will have to go through the cumbersome process of re-loading the music.
I can't tell is this was caused by the Mavericks upgrade or Iphoto Update.

My sound no longer works on my Apple 5c cell phone. What should the settings be?

My sound no longer works on my phone. What should the settings be?

What do you by "what should the settings be? Volume is either up or down.

Mail Sounds No Longer Work on iPhone 4.

The sounds for mail, incoming or outgoing, no longer work on my iPhone 4 (4.3.3). All it does is vibrate even though that is set to Off. All the other feature settings are set to ON. I have checked all the sounds and they work, they just don't work with the Mail any more. This is a MobileMe IMAP account. I tried re-setting everything without deleting data and that made no difference. The sounds worked perfectly up until a week or so ago. Any ideas on how to have them function again? In addition, when I connect the iPhone to my iMac (Snow Leopard 10.6.7) the phone also vibrates. This is a new feature as well. Any chance a setting in iTunes might have caused this, and, if so, how to remedy it.
Thanks!

Problem solved. No further action.

Sound no longer works after upgrade to Windows 8.1

System:
Operating System
Windows 8.1 64-bit
CPU
Intel Core i5 3330 @ 3.00GHz
23 °C
Ivy Bridge 22nm Technology
RAM
8.00GB Dual-Channel DDR3 (11-11-11-28)
Motherboard
LENOVO MAHOBAY (SOCKET 0)
18 °C
Audio
ASUS Xonar DGX Audio Device
I sucessfully upgrading to Windows 8.1 and everything was functioning after the upgrade. However, after the first time I restarted my system after the upgrade the intergrated soundcard no longer worked.
I attempted to remove and reinstall the RealTek audio driver, downloading the newest 8.1 compatible driver from the Lenovo support site.
The drive refused to installed, either via the executable or by manually installing the driver through a device manager upgrade.
So I attempted to install a stand alone soundcard, to no success.
In device manager this is displayed for both the integrated motherboard audio and the new Asus sound card:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code
52)
If I disable the driver driver signature enforcement, neither audio option works. Instead I get this error in device manager:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.
(Code 39)"
Attempting to update the driver in device manager, Windows tell me I am on the most up-to-date, recommended driver, yet at the same time refuses to
allow it to function.
Extremely frustrating.
Any help would be greatly appreciated.

I have also attempted to clear out the registry Upper/Lower Filters to no success.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}
At that registry key, in the right window, is there, under "Name", either an UpperFilters orLowerFilters value?
If so, for each of the UpperFilters and/or LowerFilters value, what is listed under "Data"?
There could be an improper entry at one of these values which may be causing the problem.

Mail sounds no longer working

After upgrading to Mountain Lion, the Mail app (6.0) no longer makes sounds for checking, sending, or receiving email messages. Sounds are enabled in both Mail preferences as well as the mail section of Notifications. Sounds elsewhere still work, just not in Mail. Any thoughts?
I've already searched for, and found, the various threads about activities Mail being curtailed (no spinning wheels for example). I can think of no good reason to remove visual/audio feedback from an application (or make it configurable).

Certainly. This is something that has been around in Mac's for a very long time, but this Apple KB will tell you what to do. Very simple:
http://support.apple.com/kb/PH4405
I've found since my post that I still occasionally lose sound, but quitting and restarting the Mail app has been sufficient; no need to reset the PRAM anymore.

Sounds no longer working on iPhone 4

Hello,
So a few days ago I dropped my iPhone 4. I'm not 100% sure but I think that is when my sound stopped working. The speakers are working fine, I can hear music and things like that. None of the phone sounds such as clicking when lock/unlocked, keyboard clicks etc are working. When I press the + and - volume buttons the icon does not appear, same as when i mute/unmute it. No sounds, nothing appears. Also, when I receive incoming calls the ringer no longer works.
I have tried cleaning with toothbrush, restarting, restoring, blowing in the phone, etc.
Any help or advice would be greatly appreciated.
I do not have insurance on my phone (I know, I know) but I was in the process of buying a house and moving when they did the switch from mobileprotect to att&t so I apparently missed it and it was too late :/

I have no doubt that this is a hardware issue, probably caused by the drop as you said. By restarting and restoring without success, you have basically ruled out a software issue. All you can do now is pay $149 for an out-of-warranty replacement, or try to find one elsewhere for cheaper.

BEWARE....Sound No Longer Works Since 2.2 Update

....not sure what the heck is going on, but, since upgrading to v 2.2 tonight, my speaker no longer works. No music, no movies....I hope this lil sucka rings when I get a phone call. THAT would be really f 'd. I've checked my settings and everything looks fine. Any suggestions? Anyone else having this problem?

when I flick my silent switch on no sound comes from applications like iSleep or any other music type apps
This might be a new bug... Or it may be by design.
Also if silent switch is off and music is playing, once the screen timesout (mine set to 1 min) then the music again cuts off!!!
This has been reported on a number of threads, but it should not affect the iPod App that comes with the phone. Is that what you are seeing, or are these other app-store apps that are going silent.???
(Those app-store apps may need an update from their vendors according to one post).

Sound no longer working in 10.5.2

I've installed 10.5.2 on my PowerBook G4 15" 1.67GHz, and now, sound output no longer works. The "clicks" of the volume change don't work and neither does music playing in iTunes.
Any ideas?

Sorry - mistakenly assumed you would have tried that
LN

[SOLVED] Sound (snd_hda_intel) not working after resume from suspend

Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
Running the following brings back the sound, but that is obviously a hack:
fuser -k /dev/snd/*
rmmod snd_hda_intel
modprobe snd_hda_intel
/etc/rc.d/alsa start
I have on my /etc/modprobe/50-sound.conf:
options snd-hda-intel model=laptop
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
Here's the exact hardware specification:
# lspci -nnv|grep Audio
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Any idea where to look for this?
Last edited by yhager (2009-08-21 16:54:00)

[SOLVED]
I downgraded to kernel 2.6.29 and the problem is gone.
Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

[SOLVED] Sound doesn't work anymore

Hi,
I just installed cinnamon to test it and pulseaudio was one of its dependencies. But after testing it a few minutes, I uninstalled it again with the -Rs option.
After login to my old i3 wm the sound didn't work again. I have no explanations. Has anyone an idea how I can solve this problem?!
Thanks in advance!
Steffo
Last edited by Steffo (2013-02-19 22:15:58)

OK.
Feb 19 17:04:15 arch-stefano NetworkManager[1319]: <info> (wlan0): now unmanaged
Feb 19 17:04:15 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: activated -> unmanaged (reason 'sleeping') [100 10 37]
Feb 19 17:04:15 arch-stefano NetworkManager[1319]: <info> (wlan0): deactivating device (reason 'sleeping') [37]
Feb 19 17:04:15 arch-stefano NetworkManager[1319]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 3331
Feb 19 17:04:15 arch-stefano kernel: wlan0: deauthenticating from 00:12:bf:75:64:7a by local choice (reason=3)
Feb 19 17:04:16 arch-stefano kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): cleaning up...
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): taking down device.
Feb 19 17:04:16 arch-stefano dbus-daemon[1359]: dbus[1359]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Feb 19 17:04:16 arch-stefano dbus[1359]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Feb 19 17:04:16 arch-stefano systemd[1]: Starting Sleep.
Feb 19 17:04:16 arch-stefano systemd[1]: Reached target Sleep.
Feb 19 17:04:16 arch-stefano systemd[1]: Starting Suspend...
Feb 19 17:04:16 arch-stefano systemd-sleep[3381]: Suspending system...
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> wake requested (sleeping: yes enabled: yes)
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> waking up and re-enabling...
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (eth0): now managed
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (eth0): bringing up device.
Feb 19 17:04:16 arch-stefano dbus[1359]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Feb 19 17:04:16 arch-stefano dbus-daemon[1359]: dbus[1359]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Feb 19 17:04:16 arch-stefano kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (eth0): preparing device.
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (eth0): deactivating device (reason 'managed') [2]
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): now managed
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): bringing up device.
Feb 19 17:04:16 arch-stefano kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Feb 19 17:04:16 arch-stefano kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Feb 19 17:04:16 arch-stefano kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
Feb 19 17:04:16 arch-stefano kernel: iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
Feb 19 17:04:16 arch-stefano kernel: PM: Syncing filesystems ... done.
Feb 19 17:04:16 arch-stefano kernel: PM: Preparing system for mem sleep
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): preparing device.
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): deactivating device (reason 'managed') [2]
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0) supports 5 scan SSIDs
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: starting -> ready
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 4
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <warn> Trying to remove a non-existant call id.
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: ready -> disconnected
Feb 19 17:04:16 arch-stefano NetworkManager[1319]: <info> (wlan0) supports 5 scan SSIDs
Feb 19 17:18:28 arch-stefano kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Feb 19 17:18:28 arch-stefano kernel: Freezing user space processes ... (elapsed 0.01 seconds) done.
Feb 19 17:18:28 arch-stefano kernel: Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Feb 19 17:18:28 arch-stefano kernel: PM: Entering mem sleep
Feb 19 17:18:28 arch-stefano systemd[1]: Time has been changed
Feb 19 17:18:28 arch-stefano systemd[1]: systemd-tmpfiles-clean.timer: time change, recalculating next elapse.
Feb 19 17:18:28 arch-stefano kernel: Suspending console(s) (use no_console_suspend to debug)
Feb 19 17:18:28 arch-stefano kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Feb 19 17:18:28 arch-stefano kernel: sd 0:0:0:0: [sda] Stopping disk
Feb 19 17:18:28 arch-stefano kernel: ACPI handle has no context!
Feb 19 17:18:28 arch-stefano kernel: i915 0000:00:02.0: power state changed by ACPI to D3hot
Feb 19 17:18:28 arch-stefano kernel: e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Feb 19 17:18:28 arch-stefano kernel: PM: suspend of devices complete after 435.804 msecs
Feb 19 17:18:28 arch-stefano kernel: PM: late suspend of devices complete after 0.576 msecs
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
Feb 19 17:18:28 arch-stefano kernel: PM: noirq suspend of devices complete after 52.679 msecs
Feb 19 17:18:28 arch-stefano kernel: ACPI: Preparing to enter system sleep state S3
Feb 19 17:18:28 arch-stefano kernel: PM: Saving platform NVS memory
Feb 19 17:18:28 arch-stefano kernel: Disabling non-boot CPUs ...
Feb 19 17:18:28 arch-stefano kernel: smpboot: CPU 1 is now offline
Feb 19 17:18:28 arch-stefano kernel: smpboot: CPU 2 is now offline
Feb 19 17:18:28 arch-stefano kernel: smpboot: CPU 3 is now offline
Feb 19 17:18:28 arch-stefano kernel: Extended CMOS year: 2000
Feb 19 17:18:28 arch-stefano kernel: ACPI: Low-level resume complete
Feb 19 17:18:28 arch-stefano kernel: PM: Restoring platform NVS memory
Feb 19 17:18:28 arch-stefano kernel: Extended CMOS year: 2000
Feb 19 17:18:28 arch-stefano kernel: Enabling non-boot CPUs ...
Feb 19 17:18:28 arch-stefano kernel: smpboot: Booting Node 0 Processor 1 APIC 0x1
Feb 19 17:18:28 arch-stefano kernel: Disabled fast string operations
Feb 19 17:18:28 arch-stefano kernel: CPU1 is up
Feb 19 17:18:28 arch-stefano kernel: smpboot: Booting Node 0 Processor 2 APIC 0x2
Feb 19 17:18:28 arch-stefano kernel: Disabled fast string operations
Feb 19 17:18:28 arch-stefano kernel: CPU2 is up
Feb 19 17:18:28 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: disconnected -> inactive
Feb 19 17:18:28 arch-stefano kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
Feb 19 17:18:28 arch-stefano kernel: Disabled fast string operations
Feb 19 17:18:28 arch-stefano kernel: CPU3 is up
Feb 19 17:18:28 arch-stefano kernel: ACPI: Waking up from system sleep state S3
Feb 19 17:18:28 arch-stefano kernel: i915 0000:00:02.0: power state changed by ACPI to D0
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Feb 19 17:18:28 arch-stefano kernel: sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
Feb 19 17:18:28 arch-stefano kernel: PM: noirq resume of devices complete after 133.778 msecs
Feb 19 17:18:28 arch-stefano kernel: PM: early resume of devices complete after 0.421 msecs
Feb 19 17:18:28 arch-stefano kernel: i915 0000:00:02.0: setting latency timer to 64
Feb 19 17:18:28 arch-stefano kernel: mei 0000:00:16.0: irq 43 for MSI/MSI-X
Feb 19 17:18:28 arch-stefano kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Feb 19 17:18:28 arch-stefano systemd-sleep[3381]: System resumed.
Feb 19 17:18:28 arch-stefano kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Feb 19 17:18:28 arch-stefano systemd[1]: Started Suspend.
Feb 19 17:18:28 arch-stefano systemd[1]: Service sleep.target is not needed anymore. Stopping.
Feb 19 17:18:28 arch-stefano systemd[1]: Stopping Sleep.
Feb 19 17:18:28 arch-stefano systemd[1]: Stopped target Sleep.
Feb 19 17:18:28 arch-stefano systemd[1]: Starting Suspend.
Feb 19 17:18:28 arch-stefano systemd[1]: Reached target Suspend.
Feb 19 17:18:28 arch-stefano systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
Feb 19 17:18:28 arch-stefano systemd[1]: Stopping Bluetooth.
Feb 19 17:18:28 arch-stefano systemd[1]: Stopped target Bluetooth.
Feb 19 17:18:28 arch-stefano systemd[1]: Starting Bluetooth.
Feb 19 17:18:28 arch-stefano systemd[1]: Reached target Bluetooth.
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1a.0: setting latency timer to 64
Feb 19 17:18:28 arch-stefano kernel: ehci_hcd 0000:00:1d.0: setting latency timer to 64
Feb 19 17:18:28 arch-stefano kernel: snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Feb 19 17:18:28 arch-stefano kernel: ahci 0000:00:1f.2: setting latency timer to 64
Feb 19 17:18:28 arch-stefano kernel: tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
Feb 19 17:18:28 arch-stefano kernel: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Feb 19 17:18:28 arch-stefano kernel: usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
Feb 19 17:18:28 arch-stefano kernel: ata4: SATA link down (SStatus 0 SControl 300)
Feb 19 17:18:28 arch-stefano kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Feb 19 17:18:28 arch-stefano kernel: ata5: SATA link down (SStatus 0 SControl 300)
Feb 19 17:18:28 arch-stefano kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
Feb 19 17:18:28 arch-stefano kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
Feb 19 17:18:28 arch-stefano kernel: ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 19 17:18:28 arch-stefano kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
Feb 19 17:18:28 arch-stefano kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
Feb 19 17:18:28 arch-stefano kernel: ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 19 17:18:28 arch-stefano kernel: ata2.00: configured for UDMA/100
Feb 19 17:18:28 arch-stefano kernel: usb 2-1.4: reset high-speed USB device number 6 using ehci_hcd
Feb 19 17:18:28 arch-stefano kernel: usb 2-1.4: device firmware changed
Feb 19 17:18:28 arch-stefano kernel: usb 1-1.4: reset full-speed USB device number 5 using ehci_hcd
Feb 19 17:18:28 arch-stefano kernel: btusb 1-1.4:1.0: no reset_resume for driver btusb?
Feb 19 17:18:28 arch-stefano kernel: btusb 1-1.4:1.1: no reset_resume for driver btusb?
Feb 19 17:18:28 arch-stefano kernel: usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
Feb 19 17:18:28 arch-stefano kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Feb 19 17:18:28 arch-stefano kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Feb 19 17:18:28 arch-stefano kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Feb 19 17:18:28 arch-stefano kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 19 17:18:28 arch-stefano kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Feb 19 17:18:28 arch-stefano kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Feb 19 17:18:28 arch-stefano kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Feb 19 17:18:28 arch-stefano kernel: ata1.00: configured for UDMA/100
Feb 19 17:18:28 arch-stefano kernel: sd 0:0:0:0: [sda] Starting disk
Feb 19 17:18:28 arch-stefano kernel: iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
Feb 19 17:18:28 arch-stefano kernel: iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
Feb 19 17:18:28 arch-stefano kernel: PM: resume of devices complete after 2845.423 msecs
Feb 19 17:18:28 arch-stefano kernel: PM: Finishing wakeup.
Feb 19 17:18:28 arch-stefano kernel: usb 2-1.4: USB disconnect, device number 6
Feb 19 17:18:28 arch-stefano kernel: cdc_ncm 2-1.4:1.6 wwan0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
Feb 19 17:18:28 arch-stefano kernel: Restarting tasks ... done.
Feb 19 17:18:28 arch-stefano kernel: video LNXVIDEO:00: Restoring backlight state
Feb 19 17:18:28 arch-stefano laptop-mode[3528]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:28 arch-stefano laptop-mode[3543]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:28 arch-stefano laptop-mode[3546]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:28 arch-stefano laptop-mode[3553]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:28 arch-stefano laptop-mode[3558]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:28 arch-stefano laptop-mode[3568]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:28 arch-stefano laptop-mode[3598]: Laptop mode
Feb 19 17:18:28 arch-stefano kernel: usb 2-1.4: new high-speed USB device number 7 using ehci_hcd
Feb 19 17:18:28 arch-stefano laptop-mode[3608]: enabled, not active [unchanged]
Feb 19 17:18:29 arch-stefano laptop-mode[3666]: Laptop mode
Feb 19 17:18:29 arch-stefano laptop-mode[3670]: enabled, not active [unchanged]
Feb 19 17:18:29 arch-stefano laptop-mode[3677]: Laptop mode
Feb 19 17:18:29 arch-stefano laptop-mode[3678]: enabled, not active [unchanged]
Feb 19 17:18:29 arch-stefano kernel: cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
Feb 19 17:18:29 arch-stefano kernel: cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
Feb 19 17:18:29 arch-stefano kernel: cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
Feb 19 17:18:29 arch-stefano kernel: usb 2-1.4: MAC-Address: 02:80:37:ec:02:00
Feb 19 17:18:29 arch-stefano kernel: cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
Feb 19 17:18:29 arch-stefano kernel: cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
Feb 19 17:18:29 arch-stefano kernel: cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
Feb 19 17:18:29 arch-stefano mtp-probe[3679]: checking bus 2, device 7: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4"
Feb 19 17:18:29 arch-stefano mtp-probe[3679]: bus: 2, device: 7 was not an MTP device
Feb 19 17:18:29 arch-stefano laptop-mode[3728]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3734]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3735]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3737]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3742]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3739]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3747]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3749]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3748]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3770]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3762]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3789]: Warning: Configuration file /etc/laptop-mode/conf.d/board-specific/* is not readable, skipping.
Feb 19 17:18:29 arch-stefano laptop-mode[3909]: Laptop mode
Feb 19 17:18:29 arch-stefano laptop-mode[3921]: enabled, not active
Feb 19 17:18:29 arch-stefano laptop-mode[4025]: Laptop mode
Feb 19 17:18:29 arch-stefano laptop-mode[4026]: enabled, not active
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Auto-activating connection 'WLAN-756477'.
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) starting connection 'WLAN-756477'
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0/wireless): access point 'WLAN-756477' has security, but secrets are required.
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0/wireless): connection 'WLAN-756477' has security, and secrets exist. No new sec
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Config: added 'ssid' value 'WLAN-756477'
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Config: added 'scan_ssid' value '1'
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Config: added 'psk' value '<omitted>'
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> Config: set interface ap_scan to 1
Feb 19 17:18:31 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: inactive -> scanning
Feb 19 17:18:35 arch-stefano kernel: wlan0: authenticate with 00:12:bf:75:64:7a
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Feb 19 17:18:35 arch-stefano kernel: wlan0: send auth to 00:12:bf:75:64:7a (try 1/3)
Feb 19 17:18:35 arch-stefano kernel: wlan0: authenticated
Feb 19 17:18:35 arch-stefano kernel: wlan0: waiting for beacon from 00:12:bf:75:64:7a
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: authenticating -> associating
Feb 19 17:18:35 arch-stefano kernel: wlan0: associate with 00:12:bf:75:64:7a (try 1/3)
Feb 19 17:18:35 arch-stefano kernel: wlan0: RX AssocResp from 00:12:bf:75:64:7a (capab=0x431 status=0 aid=1)
Feb 19 17:18:35 arch-stefano kernel: wlan0: associated
Feb 19 17:18:35 arch-stefano kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: associating -> associated
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless net
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> dhclient started with pid 4040
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Beginning IP6 addrconf.
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Feb 19 17:18:35 arch-stefano dhclient[4040]: Internet Systems Consortium DHCP Client 4.2.4-P2
Feb 19 17:18:35 arch-stefano dhclient[4040]: Copyright 2004-2012 Internet Systems Consortium.
Feb 19 17:18:35 arch-stefano dhclient[4040]: All rights reserved.
Feb 19 17:18:35 arch-stefano dhclient[4040]: For info, please visit https://www.isc.org/software/dhcp/
Feb 19 17:18:35 arch-stefano dhclient[4040]:
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Feb 19 17:18:35 arch-stefano dhclient[4040]: Listening on LPF/wlan0/00:24:d7:9b:d9:ec
Feb 19 17:18:35 arch-stefano dhclient[4040]: Sending on LPF/wlan0/00:24:d7:9b:d9:ec
Feb 19 17:18:35 arch-stefano dhclient[4040]: Sending on Socket/fallback
Feb 19 17:18:35 arch-stefano dhclient[4040]: DHCPREQUEST on wlan0 to 255.255.255.255 port 67
Feb 19 17:18:35 arch-stefano dhclient[4040]: DHCPACK from 192.168.3.1
Feb 19 17:18:35 arch-stefano dhclient[4040]: bound to 192.168.3.100 -- renewal in 171758 seconds.
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> (wlan0): DHCPv4 state changed preinit -> reboot
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> address 192.168.3.100
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> prefix 24 (255.255.255.0)
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> gateway 192.168.3.1
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> nameserver '192.168.3.1'
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> domain name 'Speedport_W_700V'
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Feb 19 17:18:35 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) started...
Feb 19 17:18:36 arch-stefano NetworkManager[1319]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Feb 19 17:18:36 arch-stefano NetworkManager[1319]: <info> Policy set 'WLAN-756477' (wlan0) as default for IPv4 routing and DNS.
Feb 19 17:18:36 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) successful, device activated.
Feb 19 17:18:36 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Feb 19 17:18:36 arch-stefano dbus[1359]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Feb 19 17:18:36 arch-stefano dbus-daemon[1359]: dbus[1359]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Feb 19 17:18:36 arch-stefano dbus-daemon[1359]: dbus[1359]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Feb 19 17:18:36 arch-stefano dbus[1359]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Feb 19 17:18:55 arch-stefano NetworkManager[1319]: <info> (wlan0): IP6 addrconf timed out or failed.
Feb 19 17:18:55 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Feb 19 17:18:55 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Feb 19 17:18:55 arch-stefano NetworkManager[1319]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Feb 19 17:25:26 arch-stefano sudo[4068]: stefano : TTY=pts/1 ; PWD=/home/stefano ; USER=root ; COMMAND=/usr/bin/journalctl -b
Feb 19 17:25:26 arch-stefano sudo[4068]: pam_unix(sudo:session): session opened for user root by (uid=0)
Feb 19 17:28:27 arch-stefano sudo[4068]: pam_unix(sudo:session): session closed for user root
Feb 19 17:29:14 arch-stefano sudo[4090]: stefano : TTY=pts/1 ; PWD=/home/stefano ; USER=root ; COMMAND=/usr/bin/journalctl -b
Feb 19 17:29:14 arch-stefano sudo[4090]: pam_unix(sudo:session): session opened for user root by (uid=0)

[SOLVED] Sound no longer working

Similar Messages

Maybe you are looking for