[SOLVED] Sound (snd_hda_intel) not working after resume from suspend

Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
Running the following brings back the sound, but that is obviously a hack:
fuser -k /dev/snd/*
rmmod snd_hda_intel
modprobe snd_hda_intel
/etc/rc.d/alsa start
I have on my /etc/modprobe/50-sound.conf:
options snd-hda-intel model=laptop
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
Here's the exact hardware specification:
# lspci -nnv|grep Audio
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Any idea where to look for this?
Last edited by yhager (2009-08-21 16:54:00)

[SOLVED]
I downgraded to kernel 2.6.29 and the problem is gone.
Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

Similar Messages

  • Touchpad permanently not working after resuming from suspend

    I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
    Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
    In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
    In Linux, I can see the difference is kernel traces when the driver is loaded.
    Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
    Now    : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
    After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
    It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
    Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
    The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

     I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home.  When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
    BTW, sorry I can't help... but at least I am entertained easily.

  • Dell Inspiron 7537 - Sound only works after resuming from suspend

    Hello,
    So my sound does not work after boot, only once I resume from suspend. So, once I turn on my computer, and I load sound, nothing work (everything is unmuted in Alsa) - then if I suspend my computer and resume - the sound works every time.
    I use Alsa and here is my amixer output (before and after suspend is the same) :
    eric@archlinux ~> amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch pswitch-joined
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 65536
    Mono:
    Front Left: Playback 5358 [8%] [off]
    Front Right: Playback 5358 [8%] [off]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch cswitch-joined
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 65536
    Front Left: Capture 11003 [17%] [on]
    Front Right: Capture 11003 [17%] [on]
    What gets rebooted when I do a suspend, but not when I reboot? Does not seem to make sense to me.
    Thanks.

    Is there any additional information I can include to help figure this out?

  • Wireless not working after resume from sleep, T440s

    Some times when I resume laptop from SLEEP, wireless are not working...
    Solved!
    Go to Solution.

    Try new drivers. Helped me a lot.
    http://ns3369637.ovh.net/index.php/outils/Drivers/Intel/Wlan/PROSet-Wireless-WiFi-Software/Intel-PRO...

  • Fingerprin​t reader not working after resuming from sleep

    I kind of mentioned this problem in a previous post and was directed here http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-67245 which is a patch that could possibly fix it.This patch didn't work. What is happening is when my laptop comes back from sleep either the fingerprint reader is unresponsive, it says "waiting..." at the top of the screen instead of the normal scan message and is unresponsive, or in some cases when I click other credentials it shows a third account (first is my account, second is the reader account,and the third is a stop sign thing that says the fingerprint reader isn't attached). When I sign in with my normal password and try to go to the fingerprint software it pops up a little window that is labeled Lenovo Fingerprint 2.0 and the message is "Pleae wait...".
    Other then returning from sleep the fingerprint reader has been working fine. Any suggestions are greatly appreciated, thanks.
    Edited to add patch link.
    Message Edited by Skurvy_Pirate on 09-22-2008 07:40 PM
    Solved!
    Go to Solution.

    Well I got it working again but I'm not exactly sure how. I will go over what I went through so you guys can get an idea and possibly fix it. To start off I talked to MS support and I worked with them for a really long time. They tried intstalling different drivers (other then AuthenTec) and anytime we did that it would say "Fingerprint reader not available" at the login. They tried changing the power settings and which devices could wake up my computer and that had no effect either. I called Lenovo and they basically just told me to download the software that was already on the computer and change the option to have it wake up the computer, which doesn't exist. They were very unhelpful.
    What eventualy got it working (and it's been working so far), is uninstalling the driver and software. Then reinstalling it all and installing the patch linked above. The first time I installed it I just double clicked it and went through the installation process. But you need to go into the folder it installs it into (C:\DRIVERS\VISTA\FPIRPON\) and double click FPIRPOn.reg which will add the fix to the registry. On top of this I also went into Device Manager and unchecked the box that allows the computer to turn of the fingerprint reader under Properties->Power Management for the device. The last thing I did was do a registry edit to force the USB to reset when waking from sleep. I found the registry edit here http://support.microsoft.com/kb/928631/en-us.
    So I am pretty sure it was the patch that fixed it when I correctly installed it because I had tried both the power management thing to keep it from getting turned off AND the registry edit and it didn't work. I also thing that Vista SP1 fixes what the registry edit does, but I tried it anyways because I was desperate haha. I'm going to undo the registry edit and power management thing one at a time and see if it still works. If it doesn't keep working I'm guessing it's a hardware problem and going to call Lenovo to get it fixed.
     Anyone who is having this problem I would suggest they try the patch in the link that I first posted (http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-67245)and follow the installation instructions carefully. Good luck!

  • Screen is not working after resuming from sleep mode

    Hello,
    i got a problem with my ideapad u330 touch, after i got out of the sleep mode my screen will not come on, so I need to switch it off and back on again then it works fine.
    I recently upgraded to win 8.1, i don't know if it has something to do with this, but before it works fine.
    Thank you very much

    hi McGuinness,
    Are you able to recreate the issue if you boot in Safe Mode?
    Things that you can try:
    1. Press the Windows logo key‌ +R and type devmgmt.msc. On the Device Manager, navigate to the Display Adapter (right click > choose Properties) and on the Driver Tab, check if the Rollback Driver is clickable to restore the previous display driver.
    2. Navigate to the Control Panel > Programs and uninstall the Intel display driver and reboot. Navigate to the D:\Drivers folder and locate the Intel Display driver installer (D:\Drivers\VGA\Intel) or download and run the file below to re-install the display driver.
    Intel Video Driver for 64-bit Windows
          Version 9.18.10.3165
    After installing. Try to put the computer to sleep and observe (if the power button is blinking, this indicates that the unit is in sleep mode).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • No sound in Flash after resuming from suspend

    After I resume from a suspend or sleep there is no sound in Flash and there is no networking.
    The only way is to restart my browser to reestablish the sound.
    Is there a solution for this problem?
    Thanks.

    This does not happen with Firefox in Ubuntu, as an example. So something must be wrong somewhere.
    I can confirm this happens to me in Arch with Firefox 4.0b7 and Chromium 7.0.517.44. I noticed that after resuming from suspend, not only sound (in Flash) is missing, but Flash is behaving weirdly (YouTube video plays much faster) and CPU usage goes crazy without doing any particular action.
    Last edited by Niavlys (2010-12-05 23:34:30)

  • IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

    iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.  How can I get the notifications working?

    Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

    I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    iOS 6 changed how that feature works.

  • My sound is not working after downloading windows 10

    My sound is not working after downloading windows 10 please can you help me?

    right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

  • Sql is not working after changing from MsAccess into sql server

    Following Sql  is not working after changing from MsAccess into sql server. 
    sum(trn.sales) as sales,
    sum(trn.cost) as cost,
    sales - cost as profit // Here is not working . can we not use sales a column. Please advise
    from trn
    Kind Regards
    pol
    polachan

    It will not work if use two different column from the table or column  from two  different table
    Example
    sum(trn.sales * trn.rate) as salesAmount,
    sum(trn.cost) as cost,
    sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
    from trn
    Regards
    polachan

  • System freeze after resume from suspend

    I am running arch for about 5 month now and I always had freezes after resuming from suspend (to ram - systemctl suspend) every once in a while (like once a week or less). The freezes increased massively over the last month or so and for about 2 weeks now it happens 95% of the times I resume from suspend.
    The monitor turns on and shows things exactly how I left them, but is completely unresponsible EXCEPT for I can switch to another TTY (Ctrl+Shift+F*), however I cannot type or do anything in it...
    It doesnt have anything to do with the X server as it also happens after I suspend from TTY (without any X running).
    I also checked journalctl -b -1 (shows previous boot, since I always have to hard-reset the system) but it doesnt show anything after:
    Mar 13 17:16:54 Ununhaswellium systemd-sleep[3624]: Suspending system...
    (the suspend event before resuming)
    Are there any log files that could give a hint on what exactly goes on after the resume?
    Im running the latest official 3.13.6-1 kernel and updated my BIOS to the latest beta version yesterday - didnt help either...
    Ive read pretty much every thread on the internet by now about freezes after resume from suspend but none really helped
    Last edited by CharlieBra7o (2014-03-15 09:58:51)

    Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
    And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
    Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once...

  • Sound not working after resuming on maverik

    Sound stops working after resuming my Mbp. Reseting PRam solves this issue but its tempory. I have to restart my system everytime this issue occurs.
    I have one more issue regarding sound, which might be just another bug.
    When I plug my headphone, sound doesnt switch to head phone and I cant switch manually too from system preferences. To fix this issue, I have to close the lid and wait for a while for system to sleep and resume system. after resuming, Os starts detecting my headphone. strange!

    For those of you reading this just thought that I would update you.  After spending 90 minutes on the phone and resetting/restoring the phone twice, with two different level of tech support they have deemed this a hardware issue now.  This phone worked perfectly fine before the ios 6.1.2 update that was done yesterday.  Worked fine, played music, took calls, did all the sounds, then updated and now nothing!
    Our family has 4 iphones, several ipods and 2 ipads.  I am now left with a phone just out of warranty (by 2 mo) and no choice but to pay the $200 to apple to get another phone.  Apparently this is a steal because a new 4s costs $600.! lol.  I am greatly disappointed.  I have been given the corporate phone number and assured that there would be someone in customer service to talk to, but there was not, no surprise to me.  Anyone else have any suggestions? 

  • USB ports don't work after resuming from standby with Windows 8 on X230 tablet

    I have just done a clean install of Windows 8 on my X230 tablet.  Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50).  After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files.  I've also installed all the latest Windows 8 updates.
    Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work.  My computer has two USB 3.0 ports and one USB 2.0 ports.  All exhibit the same behavior.  After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized.  After restarting Windows, the USB ports work again... until I resume from standby mode again.
    I hope there is a solution to this issue.  It is very frustrating.

    Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature.  I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager.  Unfortunately, the same symptoms of my problem persisted.
    I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site.  At the bottom of the file it gives a "Summary of Changes".  Under version 2.03 of the BIOS (the version just before version 2.50), it says:
    - (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
    This indicates that Lenovo support was already aware of such issues.  The problem was intended to be fixed in version 2.03 of the BIOS.  However, the issue persists on my machine, even with the latest BIOS.
    Hopefully someone from Lenovo can comment here.

Maybe you are looking for