[SOLVED] Space in /home is not what I choose during partition
Hello. I have a very strange problem:
I installed archlinux two days ago and partitioned as you see here:
But what I really get is:
(translated: Content=82Gb, Free Space=108Gb => Total Space=190Gb)
The first image is what GParted says to me. The second is what Nautilus file manager display.
I never seen something like this before. What could be?
EDIT & SOLVE:
I just logged in as root and noticed that the free space of my /home was what it has to be. Then I re-logged in as normal user and it was the same.
It seems to be solved.
Last edited by Redder (2013-05-25 14:59:27)
Hi Allan,
Thanks for the quick reply!
Should I leave both the HomeHub and the new white Openreach modem switched on, or would you recommend a re-boot of each device at this stage?
I have left everything as it was when the engineer left the house, and I know excessive switching on/off of the HH will be a problem for the line to stabilise.
Cheers,
Neil.
Similar Messages
-
[SOLVED] Pacman "config file could not be read" error during Arch ins
I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump. While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
btw: I'm typing this on a laptop next to my computer
[root@McArch~]# pacman -Syu
error: config file /etc/pacman.d/core could not be read
error: config file /etc/pacman.d/extra could not be read
error: config file /etc/pacman.d/community could not be read
:: Synchronizing package databases . . .
error: failed to updated core (unexpected error)
error: failed to updated extra (unexpected error)
error: failed to updated community (unexpected error)
error: failed to synchronize any databases
Any tips as to whats going on? I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
Last edited by Windfinder (2008-09-29 20:43:29)Glad you got it working.
I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot. The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist. You must have messed up an initial config file somehow as I couldn't get the same errors you got. It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly. I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare. NB* these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
Server = http://archlinux.unixheads.org/$repo/os/x86_64
Server = ftp://ftp.archlinux.org/$repo/os/x86_64
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
Well it was an interesting way to kill 30+ minutes. -
I've tried various viris scanner programmes etc but I am still haveing trouble in Firefox (not in IE). Whne I select a link to open it quite often takes me to a comletly different page
Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
What happen when the wrong download is done and it's not what you choose?
What do you do when you hve been charged but not recived the order?
Please explain the circumstances. You have either bought something you now regret or you have been charged an authorisation fee which will actually never be activated.
If you bought the Isley brothers by accident, contact Apple via the note on the invoice which invites you to advise them of a problem. If it is the first occurance of its kind you may find they will clear the charge, but you won't get more than one chance, I'll be bound. -
I have a macbook operating OSX10.6.7. Recently backing up my ipad which had lots of photos from a recent vacation. I use this laptop as the backup server for all of my gadgets so it has thousands of photos and tons of music. It just told me that it couldn't back up the ipad bc there wasn't enough disc space. I was afraid that this would happen eventually. What next? Newer laptop with more space? I'm not sure what files I could sacrifice to free up more space as most of these are important.
What size hard drive do you have in your MacBook? The cheapest options are, a larger internal hard drive, or an external drive. Or you could get a cheap desktop PC and network to it for storage. I've got one that lives in the hall with 3 Terabytes (That's 3000gb) of storage.
-
When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?
Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?
-
itunes will not load on my ipad. Icon is there. When I open "Music", it shows itunes with no content briefly and then takes me back to home page. What to do?
Quit the app and restart.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I am trying to animate a file in photoshop with vanishing point. And when I "Return 3D layer to photoshop", I'll get a cube with dimensions. It´s not what I can see in tutorials, a perfect 3D space. Using win7.
An update -
The libraries appear to all be in tact, now.
The error I am getting,
Parms are; 800/S80/5069660
ERROR - detected an exception: Unexpected database connector error
is a connection issue.
Any ideas?? -
Just installed version 5. As above I get the box then it goes to Firefox home page not my home page. I've updated and/or disabled every add-on or extension and it made no difference. I am in a university behind a tough firewall. I'd love to go back to version 4 but that isn't available.
Disabled add-ons will still be checked and can still be updated.
I don't know why you are continuously getting the message, you should only get it when there is a version change.
You can try solutions in https://support.mozilla.com/questions/817681 but you had better make a list of what extensions you had disabled first, because all of your extensions will be enabled when you delete/rename those files in your profile. You can use about:support to get a list of your extensions. (renaming is safer than deleting). -
I just did an update to Lion 10.7.4 with Safari 6.0. Now when I re-open Safari after closing it by clicking the red button, it re-opens to just my home page, not to all my previous tabs as it did before the update. I prefer having my old tabs re-open. How can I fix this?
I've had what I think is the same problem since the most recent software update. I have Lion 10.7.4 and have updated to Safari 6.0. The most noticeable difference is that where previously I had two boxes at the top of the Safari window (one to enter URL addresses, one for Google searches), there is now only one box for both functions. I don't like that as well, but I can live with it. However, since the most recent software update my "back button" only works about 5% of the time. Most of the time it is grayed out. So I usually can't get back to previous pages using the back button. Also, when I've clicked a link that opens a new window (for instance, going through the return process at Amazon, I clicked UPS locator and it opened a new window), where in the past I would have just clicked the red button after I had the information, the UPS locator window would have closed, and I would have been back at Amazon - now if I close the UPS locator window, all Safari windows close. The Safari application doesn't close, but the Amazon window closes, I'm back to an empty screen, and I have to open a new Safari window and reenter everything. I'm using a work-around of clicking on History and selecting the description of the window I want to get back too, but that only works part of the time. In the Amazon example, that's what I did once I had the UPS info, but even though I clicked the correct window description, it took me back to the beginning of the return process & I had to reenter all the info. Of course, that info was easy to reenter, but if I'm in the middle of a complicated process, it's a big problem. I've filed a bug report; I surely hope the Apple engineers are able to fix this. I'm used to using the back button function a lot!
-
Is this now where to ask DVD Studio Pro questions? If not, please let me know where. Here's my question: Using DVD Studio Pro 3, when trying to burn a disc which is 4.5GB, I get error message "Not eough disk space in target folder". What to do?
Thanks. Unfortunately, I need to make a master DVD that can then be duplicated in bulk as a single layer disc. This surprises me because I tried burning a different DVD project that has worked in the past which is also 4.5 GB and now I could not burn that either. I also reencoded some material to get the new project down to 4.4 GB but it still would not burn. Any ideas are appreciated.
-
Hello my name is and I'm from Israel Lidor My home button on the iPhone 5 does not pass he makes heads and crooked, I bought it from Apple in Spain Barcelona If you can do something with this issue Nora will thank you.!
What you sent me does not help me right
My problem is the hardware of the iPhone and its settings
I have a problem I Cmtor Home is not where his curve and let's make noise and not workingThe warranty is NOT international. The exception is the E.U.
Since Spain is an E.U. Member country, you can take it back to an Apple Store in any EU country for service. It can not be serviced outside of the E.U. -
I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug
You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly? -
Igot new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do
Hello, krishna kumar.j.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing and issue with your Home button. Here are the troubleshooting steps when experiencing this.
Get help with buttons and switches on your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT203017
Cheers,
Jason H.
Maybe you are looking for
-
Long delay when trying to save print as PDF
For some reason, there is a long delay, usually up to five minutes, before the system will allow me to save a print as a PDF. I ran disk utility and no issues arose. Anyone know why this is happening?
-
Brand new iPod touch won't stay connected to Wifi
I got a brand new white iPod touch for Christmas, and I can get it to connect to the internet and I can use the internet, but then after a few minutes it drops off the connection and I have to go back in and reconnect it. I know there isn't anything
-
Where do we need to put backcontrol file in RAC system
Hi Friends, We have a 4 nodes cluster. The database in supported by SAN/ASM with two diskgroup. In rman backup setting. I saw that CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/10.2.0/db_1/dbs/snapcf_sale4.f'; # default auto backup
-
Sync outlook tasks with iphone 4
Iphone 4 with icloud and iOS 6.1.2; MS Outlook 2007 on 32 bit win 7 OS. How can I sync Outlook's "tasks" with my iphone via iCloud? Barring iCloud, what other options do I have for syncing tasks? Basically, I am trying to keep everything functionin
-
Lightroom catalog together with network
Hello, i have a home network with Lightroom on my base computer. The Lightroom catalog is also stored here. The pictures are on a central server, connected to the network. This works fine. But: i want to use a second computer in another room with Lig