[SOLVED] Spell Check on KDE4 not working.

So, I have Spell check enabled in systemsettings->locale. Further, I have enchant installed as well. However, spell check does not work on any application inside KDE (blogila, kword, kate etc). Am I missing any package?
EDIT: Please ignore. Fixed it. I was missing the ispell package.
Last edited by devadittya (2011-02-20 14:43:49)

tohben wrote:is /Volumes/efi on OS X the same as /mnt/efi on linux?
In some sense, mount points are arbitrary -- you can mount a partition at /mnt/efi, at /boot/efi, at /Volumes/fred, at /some/weird/place, or whatever. There are a few limits on this based on certain critical directories -- for instance, attempting to mount anything at /etc is likely to lead to pain. Likewise, if a partition holds critical system files, it may need to be mounted at a particular location to do any good. For instance, if you split /var off onto its own partition, you'd want to mount that partition at /var (except perhaps for some very rare maintenance tasks). For the ESP, though, you can mount it just about anywhere -- under either Linux or OS X. The most common mount point in Linux is /boot/efi, followed in popularity by /boot. AFAIK, there's nothing remotely resembling a "standard" mount point for the ESP in OS X.
Speaking to your broader issue, tohben, I think you'll find this much easier if you download the official rEFInd binary .zip file from the rEFInd download page and run the install.sh script from OS X. That will do the installation for you. It's probably best to install it to the OS X root partition rather than to the ESP, because some users have problems with ~30-second delays when starting rEFInd from the ESP, but normally not when started from an HFS+ volume. (The default behavior of install.sh under OS X is to install to the OS X root partition; to install to the ESP, you must add the --esp option.) If you want rEFInd to read your Linux filesystems, you can add the --alldrivers option to install.sh to install drivers; or you can manually install only the driver(s) you need.

Similar Messages

Spell Check in Mail not working

I'm back. Still no luck getting spell check to work. With all the things I've tried, I'm sure it is now isolated to a operating system based problem. The spell check on InDesign works, but mac mail, text edit, and Open Office.org which all access the OS based spelling function don't work. Not only will they not do dynamic spelling, you can't highlight and tell any of these programs to check the spelling. That doesn't work either.
I am running 10.6.8 on an iMAC 27" that is three years old. I have kept up with my updates as they have come available, and my 3 year warranty just ran out in Nov. this year. I would like to figure out how to fix this without having to wipe the hard drive or anything else that is so radical it might take me days to restore all my functionality.
Any suggestions? Run the utilities and repaired permissions, restarted holding down the shift, etc. and nothing has helped.
thanks,
Kathy

Kathy, had same problem -- here is what I found just now by running tests:
Ok, what is going on is that the preferences for spelling and grammar in word and mail seem not to be working…..
in mail preferences there is no oportunity to set preference re spelling and grammar. I can't find it in apple preferences either
You have to do it manually --- so if mispelled words in EMAIL YOU GO TO EDIT, SPELLING AND GRAMMAR:
if you check grammar with spelling -- all you get is red underline.
if you CHECK check before sending nothing happens
If you check ----check spelling and grammar (which seems to be the default) nothing happens
BUT IF YOU CHECK show spelling and grammar, you get the red underline and correction box
IN WORD, there is spelling preferences --- i chose : check spelling as type, suggest corrections, check grammar with spelling.
IF I go back to check preferences, they are changed for example if i had chosen check spelling while typing, when i go back it is unchosen
So with a document----- (before going back to preferences) ,only mispelled words are underlined red. BUT if then you go to tools, spelling and grammar --- you get the box right away
i did this research before checking directions on web see http://support.apple.com/kb/PH6911
Which for me would take copying the article, double space, under key words AND THEN MAYBE i could understand it --
i have no idea if it correlates to actual testing above.

Spell check ticked but not working

I have set the spell check to check emails as I write them (via Tools, Options, Spelling) but it just isn't working (my friends are getting some very odd emails due to my typing errors!) Am I missing something? Any help would be appreciated

Looked again and found the UK English dictionary ! Not having a good day - I blame this warm weather - not used to it in the UK!!

Spell Check in "Pages" not working

I read a few posts, made sure my language was set (not void of one)... still doesn't work!

As far as I know, the spell checker is not delivered by Pages but by the operating system.
Only the hyphenation.dat resource file is delvered by Pages.
If I try to check a French text with the spell checker set on French, it works.
If I try to check an English text with the spell checker set on English, it works.
I grabbed on the Web a piece of text in Português do Brasil and tested the Português do Brasil spell checker.
The result is:
+" o amor? Nasce não sei onde, vem não sei como, e dõi não sei porque..."+
+" a razão comanda meus actos, mas o amor conduz a minha vida "+
+" é facil beijar a boca, dificil é chegar ao coração!"+
+" o melhor beijo, é o beijo desejado+
+o beijo que me completa+
+o beijo da minha forma adequada+
+o beijo com sabor do desejo+
+na flor da minha pele+
+o beijo da minha vontade+
+o beijo que faz meu pensamento+
+o beijo que faz a minha boca e o meu corpo+
+querer um novo beijo por outra vez "+
+"ate quando vamos ficar sem se ver?+
+ate quando vou conseguir viver sem você?+
+ate quando a distancia vai nos separar?+
+ate quando essa saudade eu vou ter que aguentar "+
It seems that it works correctly (Mac OS 10.5.4)
Yvan KOENIG (from FRANCE mardi 12 août 2008 15:59:15)

Spell check and autocorrect not working

I have them both turned on, but they aren't working. No corrections and no red lines.

I have never done that but I do think that it will reset all of your preferences back to factory defaults. I'm not sure if you have to enter the WiFi settings or passcode again.
The preferences are things like the keyboard dictionary, the brightness level, the auto correct and spell check. I think that it is a relatively benign thing to do.
I copied this from How to reset iPad Settings - for Dummies
How to Reset iPad Settings
Life may not have a reset feature, but iPads do. If, for some reason, you want to return your iPad to its default settings, you can reset them. The last item under iPad's General settings is Reset. When you click it, you get options for resetting the following:
Reset All Settings: Every one of the preferences and settings are reset, though information you've added to apps like Calendar and Contacts doesn't change at all.

Spell Check and Proofreading not working

When typing, spell check doesn't underline words that are spelled incorrectiy. And proofreading doesn't underline grammaticaly incorrect things. I've typed words incorrectly to see if it would underline, and it doesn't. When i actually open the spell check window, it still doesn't say anything is wrong. This is a problem across my whole Mac, so it might be something with the OS. As im typing this when i spell "incorectly" it doesn't change it to "incorrectly". And help/suggestions?

I am not sure if you all are following this post anymore, but in case you are, here is a solution.
With the Inspector open:
Select All (the entire document)
Within Inspector click: TEXT > MORE
About 3/4 down the Inspector window should be "Language." Change the Language to English (or whatever you need). You may have to change everything to "None" first and then back to English. Somehtimes this Language feature can get changed accidentally if you copy and paste from another document, particually MS Word or GoogleDocs. It does not always happen, but sometimes it does. This should fix your problems.

Siebel Spell Check : Lexicon Path not found

I am using Spell Check for one of the long field and the spell check is working fine on my local. When I moved the changes to server, I am getting "Spell Checker: Lexicon Path not found(SBL-SPC-00109)" error on clicking on Spell Check button. Could anyone tell me what is the reason for this error and how it can be rectified?
Thanks,
Shankar Sarkar

Ibfacts,
thanks for your reply. First let me ask this Q, I got this catalog file and repository from PRD people and I just placed them accordingly in my local macine. Configured NSconfig file and Insanceconfig.xml file. Are there any other configurations needed to work as expected? Please let me know
Thanks
newbie

Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

Spell Check button doesn't work anymore

When I click on "Spell Check" button, it seems all works fine, but as soon as I click on "Change" button, or "Go back/Edit" or "Post Message", I receive the following error message :
Your spell session has expired - please go back to the posting page to resume the spell check.
What's the timeout on that page, few seconds ?
Nicolas.

Yeah, I use Firefox on my personal computer since a while, and I would have forget what's IE without being on client site which are stuck on full Microsoft product suite. Furthermore, I wouldn't have to know some IE's bugs like Re: Tags [pre] and [/pre] does no more keep blank lines. And don't know such bug is not a big missing.
Nicolas.

Facebook Check In/places not working?

I have the latest 9320 3g bb, i don't have the BB Addon, and im using wifi, when i try to check in it just says aquiring location and my location is never found. In my options GPS services are all on and in my fb settings places is also on but it's still not working? do i need to edit a privacy setting on fb? if so how and which one
here are all the screens you need:
http://imgur.com/ABOky,MuG7t,7jxBS,COz9l,VK86w,K4661

Hi ezeekaY ,
Welcome to the BlackBerry Support Community.
By the Add on, are you referring to a data plan from your wireless service provider? A data plan is required to connect your BlackBerry® Curve™ 9320 smartphone with the BlackBerry® Internet Service to use GPS services and Places for Facebook® for BlackBerry® smartphones.
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

[SOLVED] MSI GT70 keyboard buttons not working

Hi! I am a normal user of computers that like games, so I bought this awesome notebook MSI GT70 i7 16gb ram GTX 675MX 128ssd+750hdd, with a keyboard by steelseries.
Everything was ok, using the notebook as came when I bought, with OS windows 8, with no format nor modifications by me, using it since January 2013.
The problem is that about 1 or 2 weeks some shortcuts of keyboard arent working anymore:
- Wifi button isn't working and isn't becoming orange when pressed, and Fn+F8 isn't working either;
- Screen shutdown button is becoming orange when pressed but not working;
- Cd-dvd eject button is becoming orange when pressed but not working;
- I tried also Fn+F9 and Fn+F12 shortcuts, and I think they arent working either.
At the same time, the Cooler button and the Backlight's Keyboard button are working correctly. Turbo button maybe is working too but I don't know if something become overclock when I activate it.
I would really appreciate some help, since I love my notebook very much, and I hope it's not a hard problem to solve.
Thanks!

Quote from: flobelix on 10-July-13, 00:47:56
Try resetting EC: >>How to reset the EC (Embedded Controller)<<
If that doesN't help uinstall SCM and after reboot install latest version: http://www.msi.com/service/download/utility-19670.html
Also try updating .Net Framework 4.5: http://www.microsoft.com/en-us/download/details.aspx?id=36377
Hi,
I followed your advice:
1. uninstalled SCM, restarted
2. installed SCM, restarted
3. tried to update .net framework, had it already
4. resat the EC
But unfortunately it did not change my GE60 2OC's behaviour: when i press the back-light button it opens my browser with dragoonarmy/msi.com>/ BUT NO LIGHT.
Do anybody have a suggestion to solve this??
Thanks Kurt

[SOLVED] Suspend to ram / disk not working in newer kernels

Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)

Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51)

[SOLVED} Suspend to ram does not work (with sleep, s2ram, pm-utils)

Hi.
I would like to ask for one thing: i can't suspend to ram or resume from suspend to ram.
I treid to check over www in order to find some help, some solutions, and how to fix that. Unfortunately, i found these:
https://forums.opensuse.org/showthread. … 13-2/page2
https://bugzilla.opensuse.org/show_bug.cgi?id=913105
https://forums.opensuse.org/showthread. … S-13-1-x64
Bug 91921 - WD 2TB Caviar black causes hard lock on resume S2RAM
https://bugzilla.kernel.org/show_bug.cgi?id=91921
In fact, when i was researching of this problem i wanted to check if my graphic card and memory are failing so a did few changes (removed memory stick and so one) but in doing this i removed almost all of my hard disk drives because i didn't want to hurt them with many reboots or resets.
What did i find? It is strange, kernel version is not important because i checked most of them.
I removed 2x2TB Seagate F14 series along with 4x3TB WD Green. Then i checked s2ram, it went to suspend, and resumes correctly. Everything works. I put it to sleep with s2ram -f -a 1. Works
I attached my 4x3TB WD Green drives. I put computer to sleep with s2ram...it causes hard lock, black screen, i could do only poweroff by powerbutton. s2ram -f -a 1 causes freez. Sometimes, but not constantly, s2ram -f -a 3 -p is being able to suspend...(mostly it does a freez, hard lock computer) but sometimes it is able to put it to a sleep, but resume just freezes everyting - no blinking cursor, no blinking num lock led and so on.
I know that you would suggest me to check logs - this is the main problem. Logs for pm-suspend works when i suspend or resume without WD drives attached. When i have them connected, i'm not able to check pm-logs because computer hangs, freezes and logs are not being stored/writed to pm-suspend.log and pm-powersave.log.
Could somebody help? Point me to a solution? I can't check logs because there are not any when freezing occurs. I checked openSuse thread and many others and for other systems there were some kernel fixex, patches.
They wrote that WD blacks are at fault because they don't have APM. Well, in fact my WD Green have APM with very aggresive factory settings: they park heads over 8 seconds not being used. I disabled it in firmware but disabling it is not the point and not the problem. People have the same problem even with APM and parking heads on other WD drives, i found it that some have it with WD Red's drives and even with very old 320GB WD Blue series - what is more funny, i have 640GB AAKS blue from WD and with this drive i can suspend or resume - APM on this drive is also unavilable, like in Green series because i changed it with wdidle with prebootable cd. I can't supend or resume with 3TB WD Greens.
BTW - suspend to disk, with pm-utils and uswsusp works ok, in 100% every time. (i had to add "shutdown method = shutdown" to /etc/suspend.conf from uswsusp package).
On Windows machine it works. Can suspend, can resume, can hibernate.
Last edited by firekage (2015-03-07 03:27:28)

Hm, sometimes i found myself astonished because some things just does not work at all on one machine, while the other one has no problem at all. I was trying to find why suspend to ram won't work at all...and while i was searching i found one topic that was leading to upower dbus. Similar problem with upower i found, by coincidence, on Manjaro forum.
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
this command above returns all the time:
Error org.freedesktop.DBus.Error.UnknownMethod: Method "Suspend" with signature "" on interface "org.freedesktop.UPower" doesn't exist
I tried this:
sudo systemctl enable acpid.service
sudo systemctl --system daemon-reload
sudo systemctl restart systemd-logind
As soon as i enabled and started acpid.service...my supend to ram, from kde, works like a charm, without graphic problem, or freezing.
There is few question: why on my desktop suspend doesen't work out of the box, when even archwiki says it should? Why on my netbook machine (Acer AOD270) that has the same package installed it works out of the box? Why on my desktop machine acpid.service was not enabled, was not started and was not running while on the notebook it does?
Anyway...i fixed it by a big coincidence because on Fedora forum somebody has problem with suspend to ram with nvidia GTX750 and this card was new like my card (GTX660). He posted the same problem with upower that i posted in quotes and because of this i found another thing on Manjaro forum and that was it!
BTW - this problem, i now think, is not related to my WD drives because it works with them. I think that there was another one ugly thing that broke my suspend to ram ability - bios of my motherboard (so called uefi bios with support for old one) has no option for S1-S5 stated (like the previous motherboards had) and only have ASPM...and ASPM is in my opinion broken but i will try to veryfi it one again later.
Last edited by firekage (2015-03-07 03:29:20)

Check for updates not working in 9 pro

I am running Acrobat 9 pro on a Vista machine. Acrobat appears to have been malfunctioning (bates numbering is not working properly), and I uninstalled (and deactivated) Acrobat, and then reinstalled it.
After reinstallation, I used the check for updates feature in the help menu to update from 9.0 to 9.2. But now every time I run Check for updates from Help, nothing updates. I get a dialog that there is an available update, and then an icon System Tray appears and a process is active for AdobeARM.exe. But nothing ever happens-no update. I then force close the process from the task manager, and still no success in getting Acrobat to update.
What can I do? Thanks very much.

LeoAdobeX:
Thank you for your rely. Here is the more detrailed info:
1. I pulled down the Help menu and chose Check for Updates.
2. A dialog appeared that said an update was available; I clicked on the button that indicated I wanted to download and install the update
3. Nothing further appeared onscreengiving my information or choice, but an incon then appeared in the system tray for the installer.
4. Hovering over the icon does not pop up any status information. If I click, double click, or right click on the incon in the system tray nothing pops up, and nothing appears. At that point I get absolutely no response.
5. If I go to task manager at that point it shows the active process AdobeARM.exe and gives no indication of it malfunctioning. But nothing installs and nothing downloads and nothing happens.
6. If I then pull down the Help menu and chose Check forUpdates again, I get a dialog that says the updater is already running.
7. All of this occured immedaitely after I reinstalled 9 pro.
I hope this additional info helps. Thanks very much.

[Solved] ar9170usb loaded but WIFI not working

Hi,
I bought today my new USB WIFI adapter (TP-Link TL-WN822N), but its not working.
ar9170usb module is loaded correctly, but wlan0 doesnt.
dmesg| grep ar9170usb
[ 3.007214] usbcore: registered new interface driver ar9170usb
lsmod | grep ar9170usb
ar9170usb 49413 0
mac80211 211662 5 ar9170usb,carl9170,rt2800lib,rt2x00usb,rt2x00lib
ath 14355 2 ar9170usb,carl9170
cfg80211 146369 5 ar9170usb,carl9170,rt2x00lib,mac80211,ath
usbcore 142192 9 ar9170usb,carl9170,rt2800usb,rt2x00usb,rt2870sta,usbhid,xhci_hcd,ehci_hcd
lsusb
Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
Any ideas?
Last edited by nexxx (2011-08-08 07:23:16)

Solved my problem by blacklisting "carl9170", so only "ar9170usb" module is loaded.
Blacklisting "ar9170usb" did not work here!
Thanks
EDIT:
After update to Kernel 3.0 the ar9170usb module was removed. Now its not working anymore.
When i load the carl9170 module, it says
[ 2.979833] usb 3-1: firmware not found.
Do I need any additional firmware?
Last edited by nexxx (2011-08-08 07:19:49)

[SOLVED] Spell Check on KDE4 not working.

Similar Messages

Maybe you are looking for