[solved] Start-Button replacement for pypanel

Salut,
is there a way to display an application launcher in pypanel? Found the launcher-section of the .pypanelrc but as I got a lot of applications, the bar is too short for all of them. Displaying the context-menu (menu.xml) of the desktop would be good enough.
Stefan
Last edited by vbtricks (2008-05-10 08:41:58)

In that case, I suggest using your window manager's menu and limiting pypanel's width (P_WIDTH in .pypanelrc) to, say, ten pixels less than the entire screen.
EDIT: If you want the gap to be on the left, just change P_START to the same value.
Last edited by skymt (2008-05-08 15:41:30)

Similar Messages

Keyboard button replacement for individual/single keys available anywhere?

My HP Pavilion dv7 Notebook PC has one (1) key cover missing on the keyboard.
(Product number: A6X02UAR#ABA Serial number: 4CB2151110)
The missing key cover or "button" is the Right Arrow ( > ) directional key, which is shown in red and illustrated below:
^=Up
<=Left >=Right
Any suggestions on where and how I may be able to obtain just this one missing key cover instead of purchasing and/or replacing the entire keyboard?
Thanks in advance!
Carl
This question was solved.
View Solution.

Hi carlbattl,
Welcome to the HP Forums!
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you would like to purchase a single keyboard key. Here is a link to a Google page with options on it. laptop keys.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

IMac DV green light on start button lights for a second then nothing!

Hi All,
My iMac DVSE 400 will not start up. When I unplug and replug power wire on back of iMac while in it is plugged into the wall socket..nothing happens, When I simply unplug from the wall sockect, the light in the on-off button turns green for a second or two...then nothing. Can you help me to diagnose and repair. Thanks.
iMac DV SE 400, 1 GB RAM, 128GB HD Mac OS X (10.4.3) Hope to get help!

I would suggest a PRAM reset. Immediately after pressing the power button, hold down the following keys; commandoption+PR. Let it chime three time, then release the keys.
Hope it helps,
Rick

Power button board for pavillon g6 1352-el

Hi to all!
First of all i have to say that my english isn't so good then i think i'm going to do many grammatical errors, please excuse me.
I need an inforation about the power button board of my laptop.
Unfortunately i have broken the flat cable that connect the power button to the main board and i haven't the right welder to make a new weld joint.
I want to replace this piece but in italy is impossible to find.
I have found a similar but the code isn't the same, so this is my question: these pieces are compatibles?
-hp power button da0r22pb6c0
-hp power button 32a22pb0010
thank you!

Good Morning @GabrieleIta
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
No worries about your English! As long as we understand one another we are fine.
I grasp you are looking for a power button replacement for your notebook. Here is a link to the HP Pavilion G6 Notebook PC Maintenance and Service Guide. Please note page 69 or Chapter 4 page 61 for the recommended part number for your power button.
I hope this helps
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My start button doesn't work in Windows Pro 8.1

I installed an Windows Pro 8 to 8.1 Pro x64 on a desktop computer. Both were clean installations, no other software was installed. With Window 8.1 Pro, the start button worked for a day after all the updates, then booted the computer. Now, if I try to right
click on the Start button with the mouse; nothing happens. Thinking it was a virus, I used Windows Defender to search to the for a virus and nothing found. No other Windows updates to fix the problem! To me it just another glitch in Windows!
I updated a laptop at the same time with Windows 8 to 8.1 X64, not the Pro version. The laptop was a OEM version of Windows 8. The laptop works fine with Windows 8.1 after upgrading it.

Hi,
Please try to copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
If it doesn't work, please run following command to repair system:
dism /online /cleanup-image /restorehealth
If the issue persists, let's test the issue in New user account.
If all these steps doesn't fix your issue, please capture the actions during this process by using Process Monitor:
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
How to use, please refer to this article:
Using Process Monitor to capture system events
http://www.sophos.com/en-us/support/knowledgebase/119038.aspx
Keep post.
Kate Li
TechNet Community Support

My 2002 iMac G4 went down during a power out. won't restart. tried PMU button. still won't start. fan tries for 2 sec, but nothing

my 2002 iMac G4 went down during a power out. won't restart. tried PMU button. still won't start. fan tries for 2 sec, but nothing

Sometimes, a replacement 1/2AA 3.6v Lithium PRAM battery is needed
to get these back into running form again, because these are one-way
and without a good battery, settings are lost or easily corrupted. And this
can contribute to a failure on startup. But that is a troubleshooting measure.
There could be another issue, although these batteries are only good for a
few years at best. A power outage can revoke any remainder of life out of it.
The take-apart is tedious and detail oriented; to include new thermal paste
and some special tools, good instructions, and some skills also help. An
ifixit.com repair guide may help; as would an original Apple Service guide.
Not sure if other good online guides or youtube video are available.
If the power supply is bad, the test ports near the PMU button are where
to check; with multi-meter. Also power supplies may develop issues with
bad capacitors. They have been said to be repairable.
Here's an older site with a take-apart from some time ago.
http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
This also would be a good time to consider, if battery is all that's failed, to
upgrade the internal RAM chip, or upgrade the hard disk drive, etc.
Good luck & happy computing!
edited

[solved] missing latest backups for iPhone after getting replacement phone

Thought I would share this one in case anyone else runs into it.
My the speaker on my wife's iPhone 4 on Verizon had stopped working for phone calls for the second time and a restore didn't fix it, so she returned the phone and they gave her a new one at the store. We had made several backups over the last few days, the most recent was this morning.
So tonight we hooked up the new phone to iTunes and got ready to restore it, but iTunes said the restore was last updated in FEBRUARY. What?! My wife freaked out thinking all her photos etc. were now lost for good.
I held off on the restore and decided to do some checking around before doing anything. I found the folder where the restore files are, and sure enough I found files from today. I copied that folder just in case. I also checked in iTunes itself and the backups were listed. So what was up?!
It finally occured to me that we had recently upgraded her phone to iOS 5, but that the new iPhone 4 from the store was probably still on iOS 4 -- maybe iTunes was not smart enough to see this situation and tell us about it, and maybe it won't listed iOS 5 backups for an iOS 4 phone.
Well that turned out to be the case. But what to do to fix it? I figured if I could get iOS 5 onto the phone, we would be all set. But I didn't want to tell iTunes to label it as a new phone either -- I'm not sure if that would be permanent or what. So I took a leap of faith and held down the power button and home button simultaneously for a while, past the power off notification, until the phone prompted to be connected to iTunes to be restored.
Then I plugged it back into the computer (this is Windows 7, by the way). Sure enough iTunes said it detected a phone in recovery mode, and would I like to have iTunes restore it to factory settings and put on the latest iOS? I sure would, so I did that and waited...
After that was done, iTunes wanted me to active the phone with Verizon. We had already done that an hour earlier over the phone, but tried it anyway, and it failed. We ignored that failure and went into the phone in iTunes -- it now asked if it was a new phone or if we should restore it -- and the backup from this morning was listed. Phew!
Finally completed the restore. I noticed that all of the passwords for all apps were lost -- unlike with a normal restore/backup on the same phone -- but everything else (pcitures, apps, etc.) was there. Thank goodness!
So, if you have upgraded the iOS version and have to replace your phone and the nreplacement has an older iOS verison, then that may explain why your backups appear to be missing...

Yes, I tried. But nothing is working. I am feeling bad as such a costly phone stop working in 1.4 year ?
I am just sharing my experience.
I am not ranting but yes angry as I am eligible for upgrade in Nov 2012 so don't want to pay $149 for replacement as I can upgrade to iPhone 5.
Apple expert please help me how can I fix it. It's completely software issue.

My wife's new iphone4 (a replacement for a 5 month-old iphone 4 with home button issues) is not recognized by itunes. Every other ios device in the house using that computer and Apple ID is. Any suggestions?

My wife's brand new iphone4 (which was a replacement for a 4month-old iphone4 with home button issues) is not recognized by itunes. Every other ios device on the computer/Apple ID in question is recognized and syncs perfectly. Any suggestions?

If the new phone has already been setup, make sure the phone and iTunes are both set to the same account.
You might also have to authorize this computer for the new device under the store menu.

Sent my iPhone 5 in for the sleep button replacement but it has been denied due to scratches??

As the title suggests, i have sent my phone in for the Sleep wake button replacement program that has been offered by Apple. But after sending my phone in to Machines (Because I'm in Malaysia), they have notified me that Apple themselves have denied my phone for the replacement program due to the scratches i have on my phone. I am utterly dissapointed by the way Apple is handling this situation. Has the Scratches to do with anything with the sleep button? And it has come to my attention that the page on the Apple website containing the details about the program has said nothing about scratches making the iPhone 5 ineligible for this program and i dare say that my phone is in perfect working order.

Here are the specifics for the button replacement program in the US: https://ssl.apple.com/support/iphone5-sleepwakebutton/
You need to check the Apple website for your country, and it is imperative that you read every word.

How to use an external start button for 6024E w/ sc-2345, I would like it to function like a start button in LabView but I don't know how to connect the external button to the sc-2345's connector block

I am confused as to how to connect my external start botton. I would like it to function like a start button on a front panel of a VI. I would like to use the +5V on pin 14 but I really don't know where to go from here. Any guidence for a novice would be most appreciated.

phod,
This is the LabVIEW Real-Time forum, so I suggest that in the future that you post this type of question to the Multifunction DAQ forum.
For the simplest solution you will have to connect your button to a digital line of your board, consult the sc-2345 user manual for a diagram of where these lines are exposed. You will have to connect your start button in series with a line that is high, such as your 5V pin or another digital line. Then connect this to a digital line that will be your start trigger.
Your program can poll the digital line that is connected to your button in a while loop and when it goes high, it lets the rest of the program execute. For the programming, I suggest you take a look at the shipping examples that come with LabVIEW. If yo
u have LabVIEW 7.0 go to Help>>Find Examples. Open Hardware Input Output>>Traditional DAQ>>Digital Input and Output>>E Series for some examples of digital I/O programming with E-series boards.
Hope that gets you started.
Gerardo

Same problem that everybody has after up dating my apple tv. Apple is to blame for this and should solve problem or replace unit.

same problem as everybody after having updated my apple tv. apple is to blame for this and should solve problem oe replace unit. lost confident with apple products.

What problem would that be? There are always going to be people who experience problems after an update and this is a community for helping with such things.
If you can elaborate on the issue it will make it easier for someone to help.

Sleep/Wake button stuck but they wont replace for free?!

So my sleep/wake button is stuck and I went to the apple store, but they are making me pay $199 to replace it when I still have warranty! I don't understand they say I have a speck of pink of the LCI but no corrosion which means they should still be able to replace it for free, is anyone else having problems and if so how do I get my phone replaced for free?!

i have an exactly same problem... The phone just didnt ever touch water!!

FPM: Tooltip for the start button

Hi FPM experts,
I have one question/requirement concerning the start button within the FPM GAFfloorplan. I would like to add a tooltip to that button. I know that this button is part of the FPM and can not be influenced during design time.
Nevertheless I hoped to be able to influence the button during runtime, namely by using the interface IF_FPM_CNR_GAF and the method DEFINE_BUTTON. According to the Developers Guide for FPM Release 701 this should work for standard buttons. However I did not succeed in using this method.
When taking a closer look at the signature I also became aware that there is one parameter missing in the signature of the interface that is described within the Developers Guide (IV_SCREEN): To the best of my knowledge this parameter is not available in 7.01/7.1 systems.
Any help on that topic is appreciated!
Thanks
Christian

Hi,
Is this your previous thread?
http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-display-tooltip-for-the-start-menu-items/c93e5457-0ac6-4bbd-8a54-ffacbeadf34f
I have checked with some Windows 7 machines in workgroup, and they are all no infotips from the start menu items, this might by design.
Besides, please take a look at the below links:
Start Menu
Best regards
Michael
Michael Shao
TechNet Community Support

C# code for a start button

Hi,
I'm trying to write a program/code for a start button. Basically the code will work in junction with an Adam module and all i need is for when inout 0 of the adam module is on, output 0 will turn on - otherwise a message will appear. Sp far i have:
private void button1_Click_1(object sender, EventArgs e)
        if (IO[0] == 1)
               Out[0] = 1;
        else
         MessageBox.Show("Safety circuit not ok");

Hi,
According to yout description, I am afraid your problem is out of support in C# forum. For Adam problem, you should go to the link to post your thread:
http://support.advantech.com/support/new_default.aspx
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Need a user exit or enhancement point for loading start button in VT02

I have a requirement to write the code for loading start button and complete PGI as soon as loading start is checked in VT02(shipment transaction).
Please suggest....

HI Venkata,
Below are the user exits and BADIs in the transaction VT01
Enhancement
V56UNUMB                                Shipment number allocation
V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UCHCO                                Check shipments are complete
V56UCHCH                                Shipment processing: Check whether changes were made
V56TDLIF                                Filter Delivery Items for Shipment
V56SLDET                                Shipment processing: Leg determination
V56MVT04                                Extensions for Collective Processing of Shipments
V56LOCID                                Shipment Processing: Determine Location Identification
V56LDELI                                Read Delivery Data for Shipment Processing
V56L0001                                Status of Shipments for a Delivery
V56FSTAT                                Shipment processing: Activities when setting a status
MV56AINI                                Initialization of transaction control for transportation
V56USTAT                                User-individual definition of transportation planning status
V56USVDO                                Update new objects for transport
V56USVDP                                Preparation for updating new objects for transport?
V56AFCCH                                Shipment processing: Check function code allowed
V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
V56ARCHV                                Customer-spec. checks for archiving shipments
V56ATKTX                                Change the number of lines for text input in shipment
V56BMOD                                 Transportation processing: Field modification
V56DISTZ                                Shipment Processing: Determine Distance
V56FCOPY                                Shipment processing: Copy delivery data
Business Add-in
BADI_V56N                               User Exit Transport - Message Determination
BADI_LE_SHIPMENT                        BadI: Shipment Processing
Regards,
Radhika

[solved] Start-Button replacement for pypanel

Similar Messages

Maybe you are looking for