[SOLVED] Steam freezes at login

When I open Steam, I put my login information, sometimes it tries to connect, then freezes. But most times, it freezes after I put my login information and press enter. I'm using Cinnamon maybe it has something to do with this.
I'm not using the hack, I was officially invited. I thought at first I had deleted some needed file or something so I reinstalled a fresh Arch, It is still the same. I will quickly post any information needed. Thanks for the help.
Last edited by lazarojhr16 (2012-12-19 13:56:35)

ChemBro wrote:Did you wait a minute or so? Starting Steam can sometimes take a long time.
Yea, Right now it signs me in, and as soon as I click on play or install, it just crashes on me. Not sure whats going on.

Similar Messages

  • [solved] Arch freezes before login

    Hello there,
    today I restarted my computer after about 4 days uptime to clean the dust and reconnect my DVD derive. For this I removed my radeon graphics card and a usb device I didn't need.
    After cleaning and reconnecting everything I tried to start my computer. My BIOS didn't let me and told me that my hard disk drive was failing and I should back it up and insert a 'proper' boot medium. I didn't really believe it because not so a long time ago I checked this device and it was completly fine. I disconnected the DVD drive and indeed my BIOS let me pass without any trouble.
    But now Arch boots to the login shell and just freezes. I only get enough time to enter the first few letters of my username. Before the boot screen clears for the login screen I always get a glance on a error about my graphics card (a radeon hd 6850, I use the radeon driver) and another device and that they are initialized in a generic mode or something. Couldn't find anything in the logs about that.
    Here are they and I hope someone is able to help:
    errors.log;
    Apr 10 11:00:32 localhost kernel: [13239.127128] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 11:00:32 localhost kernel: [13239.230302] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 11:00:32 localhost kernel: [13239.333550] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 11:29:11 localhost /usr/sbin/crond[757]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
    Apr 10 11:29:12 localhost kernel: [ 5.247408] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    Apr 10 11:29:13 localhost dhcpcd[661]: eth0: sendmsg: Cannot assign requested address
    Apr 10 11:39:02 localhost kernel: [ 600.497461] sd 6:0:0:0: [sdb] No Caching mode page present
    Apr 10 11:39:02 localhost kernel: [ 600.497466] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Apr 10 11:39:02 localhost kernel: [ 600.500091] sd 6:0:0:0: [sdb] No Caching mode page present
    Apr 10 11:39:02 localhost kernel: [ 600.500095] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Apr 10 11:39:02 localhost kernel: [ 600.656186] sd 6:0:0:0: [sdb] No Caching mode page present
    Apr 10 11:39:02 localhost kernel: [ 600.656190] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Apr 10 15:41:56 localhost kernel: [ 5876.442283] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 15:41:56 localhost kernel: [ 5876.544457] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 15:41:56 localhost kernel: [ 5876.647780] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 23:27:41 localhost kernel: [16940.661233] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 23:27:41 localhost kernel: [16940.766765] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 10 23:27:41 localhost kernel: [16940.869935] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 17:21:00 localhost kernel: [20588.434135] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 17:21:00 localhost kernel: [20588.435869] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 17:21:00 localhost kernel: [20588.539596] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:02:41 localhost kernel: [25592.893677] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:02:41 localhost kernel: [25592.995809] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:02:41 localhost kernel: [25593.099094] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 11 19:05:39 localhost ata_id[12267]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 11 19:07:59 localhost kernel: [25917.827291] sd 8:0:0:0: [sdc] No Caching mode page present
    Apr 11 19:07:59 localhost kernel: [25917.827295] sd 8:0:0:0: [sdc] Assuming drive cache: write through
    Apr 11 19:07:59 localhost kernel: [25917.830813] sd 8:0:0:0: [sdc] No Caching mode page present
    Apr 11 19:07:59 localhost kernel: [25917.830817] sd 8:0:0:0: [sdc] Assuming drive cache: write through
    Apr 11 19:07:59 localhost kernel: [25917.906660] sd 8:0:0:0: [sdc] No Caching mode page present
    Apr 11 19:07:59 localhost kernel: [25917.906664] sd 8:0:0:0: [sdc] Assuming drive cache: write through
    Apr 11 19:31:46 localhost ata_id[23321]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 11 19:31:48 localhost ata_id[23349]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 11 19:31:49 localhost ata_id[23358]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argument
    Apr 12 10:31:46 localhost kernel: [41074.655485] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 10:31:46 localhost kernel: [41074.757712] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 10:31:46 localhost kernel: [41074.860847] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 17:27:02 localhost kernel: [43038.005295] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 17:27:02 localhost kernel: [43038.107420] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 17:27:02 localhost kernel: [43038.210662] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 18:03:40 localhost kernel: [45244.094026] hub 6-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
    Apr 12 22:57:48 localhost kernel: [46996.101540] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 22:57:48 localhost kernel: [46996.203669] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 12 22:57:48 localhost kernel: [46996.306895] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 06:48:04 localhost kernel: [49544.131279] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 06:48:04 localhost kernel: [49544.233392] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 06:48:04 localhost kernel: [49544.234948] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:22:52 localhost kernel: [50732.517856] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:22:52 localhost kernel: [50732.620028] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:22:52 localhost kernel: [50732.723191] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 10:24:40 localhost kernel: [50848.424796] sd 9:0:0:0: [sdb] No Caching mode page present
    Apr 13 10:24:40 localhost kernel: [50848.424800] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    Apr 13 10:24:40 localhost kernel: [50848.427413] sd 9:0:0:0: [sdb] No Caching mode page present
    Apr 13 10:24:40 localhost kernel: [50848.427417] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    Apr 13 10:24:40 localhost kernel: [50848.515912] sd 9:0:0:0: [sdb] No Caching mode page present
    Apr 13 10:24:40 localhost kernel: [50848.515916] sd 9:0:0:0: [sdb] Assuming drive cache: write through
    Apr 13 19:52:08 localhost kernel: [81867.864800] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 19:52:08 localhost kernel: [81867.966901] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 13 19:52:08 localhost kernel: [81868.070164] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 03:47:04 localhost kernel: [88628.314034] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 03:47:04 localhost kernel: [88628.416250] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 03:47:04 localhost kernel: [88628.522848] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 16:52:01 localhost kernel: [88690.920669] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 16:52:01 localhost kernel: [88690.922415] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    Apr 14 16:52:01 localhost kernel: [88690.924031] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
    pacman.log
    [2012-04-10 11:46] Running 'pacman-color -Syu'
    [2012-04-10 11:46] synchronizing package lists
    [2012-04-10 11:46] starting full system upgrade
    [2012-04-10 11:46] upgraded akonadi (1.7.1-1 -> 1.7.2-1)
    [2012-04-10 11:46] upgraded arch-wiki-docs (20111219-1 -> 20120410-1)
    [2012-04-10 11:46] upgraded girara-common (0.1.1-1 -> 0.1.2-1)
    [2012-04-10 11:46] upgraded girara-gtk2 (0.1.1-1 -> 0.1.2-1)
    [2012-04-10 11:47] upgraded gparted (0.12.0-2 -> 0.12.1-1)
    [2012-04-10 11:47] unregistering X11-1.5.0.1 would break the following packages: xmonad-0.10 (ignoring)
    [2012-04-10 11:47] Reading package info from stdin ... done.
    [2012-04-10 11:47] --read-interface=array-0.4.0.0,array-0.4.0.0/array.haddock --read-interface=base-4.5.0.0,base-4.5.0.0/base.haddock --read-interface=binary-0.5.1.0,binary-0.5.1.0/binary.haddock --read-interface=bin-package-db-0.0.0.0,bin-package-db-0.0.0.0/bin-package-db.haddock --read-interface=bytestring-0.9.2.1,bytestring-0.9.2.1/bytestring.haddock --read-interface=Cabal-1.14.0,Cabal-1.14.0/Cabal.haddock --read-interface=containers-0.4.2.1,containers-0.4.2.1/containers.haddock --read-interface=deepseq-1.3.0.0,deepseq-1.3.0.0/deepseq.haddock --read-interface=directory-1.1.0.2,directory-1.1.0.2/directory.haddock --read-interface=extensible-exceptions-0.1.1.4,extensible-exceptions-0.1.1.4/extensible-exceptions.haddock --read-interface=filepath-1.3.0.0,filepath-1.3.0.0/filepath.haddock --read-interface=ghc-prim-0.2.0.0,ghc-prim-0.2.0.0/ghc-prim.haddock --read-interface=haskell2010-1.1.0.1,haskell2010-1.1.0.1/haskell2010.haddock --read-interface=haskell98-2.0.0.1,haskell98-2.0.0.1/haskell98.haddock --read-interface=hoopl-3.8.7.3,hoopl-3.8.7.3/hoopl.haddock --read-interface=hpc-0.5.1.1,hpc-0.5.1.1/hpc.haddock --read-interface=integer-gmp-0.4.0.0,integer-gmp-0.4.0.0/integer-gmp.haddock --read-interface=mtl,mtl/mtl.haddock --read-interface=old-locale-1.0.0.4,old-locale-1.0.0.4/old-locale.haddock --read-interface=old-time-1.1.0.0,old-time-1.1.0.0/old-time.haddock --read-interface=pretty-1.1.1.0,pretty-1.1.1.0/pretty.haddock --read-interface=process-1.1.0.1,process-1.1.0.1/process.haddock --read-interface=syb,syb/syb.haddock --read-interface=template-haskell-2.7.0.0,template-haskell-2.7.0.0/template-haskell.haddock --read-interface=time-1.4,time-1.4/time.haddock --read-interface=transformers,transformers/transformers.haddock --read-interface=unix-2.5.1.0,unix-2.5.1.0/unix.haddock --read-interface=utf8-string,utf8-string/utf8-string.haddock --read-interface=X11,X11/X11.haddock
    [2012-04-10 11:47] upgraded haskell-x11 (1.5.0.1-2 -> 1.5.0.1-3)
    [2012-04-10 11:47] upgraded mpd (0.16.7-3 -> 0.16.8-2)
    [2012-04-10 11:47] upgraded zathura (0.1.1-4 -> 0.1.2-1)
    [2012-04-10 15:58] Running 'pacman-color -Syu'
    [2012-04-10 15:58] synchronizing package lists
    [2012-04-10 15:59] starting full system upgrade
    [2012-04-10 15:59] upgraded vim-runtime (7.3.475-1 -> 7.3.495-1)
    [2012-04-10 15:59] upgraded gvim (7.3.475-1 -> 7.3.495-1)
    [2012-04-10 16:22] Running 'pacman-color -Syu'
    [2012-04-10 16:22] synchronizing package lists
    [2012-04-10 16:22] starting full system upgrade
    [2012-04-11 00:27] Running 'pacman-color -Syu'
    [2012-04-11 00:27] synchronizing package lists
    [2012-04-11 00:27] starting full system upgrade
    [2012-04-11 00:28] upgraded libpciaccess (0.13-1 -> 0.13.1-1)
    [2012-04-11 00:28] upgraded lib32-libpciaccess (0.13-1 -> 0.13.1-1)
    [2012-04-11 00:28] upgraded xorg-server-common (1.12.0.901-1 -> 1.12.0.902-1)
    [2012-04-11 00:28] upgraded xorg-server (1.12.0.901-1 -> 1.12.0.902-1)
    [2012-04-11 17:24] Running 'pacman-color -Syu'
    [2012-04-11 17:24] synchronizing package lists
    [2012-04-11 17:25] Running 'pacman-color -Syu'
    [2012-04-11 17:25] synchronizing package lists
    [2012-04-11 17:25] Running 'pacman-color -Rns gcc-libs-multilib'
    [2012-04-11 17:25] Running 'pacman-color -Syu gcc-libs'
    [2012-04-11 17:25] synchronizing package lists
    [2012-04-11 17:26] Running 'pacman-color -S pacman'
    [2012-04-11 17:26] upgraded pacman (4.0.2-1 -> 4.0.3-1)
    [2012-04-11 17:26] Running 'pacman-color -Syu'
    [2012-04-11 17:26] synchronizing package lists
    [2012-04-11 17:26] starting full system upgrade
    [2012-04-11 17:26] Users no longer need to be in the 'camera' group to use camera devices
    [2012-04-11 17:26] upgraded libgphoto2 (2.4.13-1 -> 2.4.13-2)
    [2012-04-11 17:26] upgraded ntfs-3g (2012.1.15-1 -> 2012.1.15-2)
    [2012-04-11 17:26] upgraded perl-list-moreutils (0.33-1 -> 0.33-2)
    [2012-04-11 17:26] Updating vim help tags...done.
    [2012-04-11 17:26] upgraded vim-bufexplorer (7.2.8-4 -> 7.2.8-5)
    [2012-04-11 17:26] upgraded vim-colorsamplerpack (8.03-2 -> 8.03-3)
    [2012-04-11 17:26] upgraded vim-doxygentoolkit (0.2.13-1 -> 0.2.13-2)
    [2012-04-11 17:40] Running 'pacman-color -Syu'
    [2012-04-11 17:40] synchronizing package lists
    [2012-04-11 17:40] starting full system upgrade
    [2012-04-11 17:41] Running 'pacman -U /home/jonas/opera-next/opera-next-12.00_1362-1-x86_64.pkg.tar.xz'
    [2012-04-11 17:41] upgraded opera-next (12.00_1359-1 -> 12.00_1362-1)
    [2012-04-11 20:56] Running 'pacman-color -Syu'
    [2012-04-11 20:56] synchronizing package lists
    [2012-04-11 20:56] starting full system upgrade
    [2012-04-11 20:58] upgraded lib32-gcc-libs (4.7.0-3 -> 4.7.0-4)
    [2012-04-11 20:58] upgraded gcc-libs-multilib (4.7.0-3 -> 4.7.0-4)
    [2012-04-11 20:58] upgraded gcc-multilib (4.7.0-3 -> 4.7.0-4)
    [2012-04-11 20:58] upgraded vimpager (1.6.7-1 -> 1.6.8-1)
    [2012-04-11 21:09] Running 'pacman-color -Syu'
    [2012-04-11 21:09] synchronizing package lists
    [2012-04-11 21:09] starting full system upgrade
    [2012-04-11 21:11] Running 'pacman -U /home/jonas/pacman-color-testing/pacman-color-testing-4.0.3-1-x86_64.pkg.tar.xz'
    [2012-04-11 21:11] upgraded pacman-color-testing (4.0.2-1 -> 4.0.3-1)
    [2012-04-12 17:46] Running 'pacman -S --asdeps libqtgtl libpqxx freetds fftw libspnav automoc4 boost cmake eigen pstoedit libwpg create-svn libgsf'
    [2012-04-12 17:46] Running 'pacman -S --asdeps llvm opengtl'
    [2012-04-12 17:47] installed llvm (3.0-2)
    [2012-04-12 17:47] installed opengtl (0.9.16-1)
    [2012-04-12 17:47] Running 'pacman -S --asdeps cmake'
    [2012-04-12 17:48] installed cmake (2.8.7-2)
    [2012-04-12 17:48] Running 'pacman -U /home/jonas/calligra-filters-git/libqtgtl/libqtgtl-0.9.2-1-x86_64.pkg.tar.xz'
    [2012-04-12 18:07] installed libqtgtl (0.9.2-1)
    [2012-04-12 18:07] Running 'pacman -S --asdeps libpqxx freetds fftw libspnav automoc4 boost eigen pstoedit libwpg create-svn libgsf'
    [2012-04-12 18:08] Running 'pacman -U /home/jonas/calligra-filters-git/libspnav/libspnav-0.2.2-2-x86_64.pkg.tar.xz'
    [2012-04-12 18:12] installed libspnav (0.2.2-2)
    [2012-04-12 18:26] Running 'pacman -S --asdeps libpqxx freetds fftw automoc4 boost eigen pstoedit libwpg create-svn libgsf'
    [2012-04-12 18:26] Running 'pacman-color -Syu'
    [2012-04-12 18:26] synchronizing package lists
    [2012-04-12 18:26] starting full system upgrade
    [2012-04-12 18:31] upgraded consolekit (0.4.5-2 -> 0.4.6-1)
    [2012-04-12 18:31] upgraded libwbclient (3.6.3-4 -> 3.6.4-1)
    [2012-04-12 18:31] upgraded mkinitcpio (0.8.6-2 -> 0.8.7-1)
    [2012-04-12 18:31] upgraded smbclient (3.6.3-4 -> 3.6.4-1)
    [2012-04-12 18:31] upgraded transmission-cli (2.50-1 -> 2.51-1)
    [2012-04-12 18:31] upgraded udev (181-9 -> 182-1)
    [2012-04-13 11:31] Running 'pacman-color -D --asdeps libqtgtl libspnav'
    [2012-04-13 11:35] Running 'pacman -S --asdeps sdl_image'
    [2012-04-13 11:35] installed sdl_image (1.2.12-2)
    [2012-04-13 11:38] Running 'pacman -U /home/jonas/flare-rpg/flare-rpg-0.15.1-2-x86_64.pkg.tar.xz'
    [2012-04-13 11:40] installed flare-rpg (0.15.1-2)
    [2012-04-13 13:49] Running 'pacman-color -Syu rtorrent'
    [2012-04-13 13:49] synchronizing package lists
    [2012-04-13 13:49] starting full system upgrade
    [2012-04-13 13:49] installed libtorrent (0.12.9-1)
    [2012-04-13 13:49] installed xmlrpc-c (1:1.29.2-1)
    [2012-04-13 13:49] installed rtorrent (0.8.9-2)
    [2012-04-13 13:49] upgraded consolekit (0.4.6-1 -> 0.4.6-2)
    [2012-04-13 13:49] upgraded flashplugin (11.2.202.228-1 -> 11.2.202.233-1)
    [2012-04-13 13:49] upgraded libmysqlclient (5.5.22-1 -> 5.5.23-1)
    [2012-04-13 13:49] upgraded mysql-clients (5.5.22-1 -> 5.5.23-1)
    [2012-04-13 13:49] upgraded mysql (5.5.22-1 -> 5.5.23-1)
    [2012-04-13 13:51] Running 'pacman-color -Rns rtorrent'
    [2012-04-13 13:51] removed rtorrent (0.8.9-2)
    [2012-04-13 13:51] removed xmlrpc-c (1:1.29.2-1)
    [2012-04-13 13:51] removed libtorrent (0.12.9-1)
    [2012-04-13 13:55] Running 'pacman -U /home/jonas/transmission-gtk2/transmission-gtk2-2.51-1-x86_64.pkg.tar.xz'
    [2012-04-13 13:55] installed transmission-gtk2 (2.51-1)
    [2012-04-13 13:56] Running 'pacman-color -Rns transmission-cli'
    [2012-04-13 13:56] removed transmission-cli (2.51-1)
    [2012-04-13 16:32] Running 'pacman-color -Syu'
    [2012-04-13 16:32] synchronizing package lists
    [2012-04-13 16:32] starting full system upgrade
    [2012-04-13 18:27] Running 'pacman-color -Scc'
    [2012-04-13 18:27] Running 'pacman-color -Sc'
    [2012-04-13 18:32] Running 'pacman-color -Rns 0ad'
    [2012-04-13 18:32] removed 0ad (a9-1)
    [2012-04-13 18:32] removed gamin (0.1.10-6)
    [2012-04-13 18:32] removed enet (1.3.3-2)
    [2012-04-13 18:32] removed 0ad-data (a9-1)
    [2012-04-13 18:32] Running 'pacman-color -Sc'
    [2012-04-14 18:14] Running 'pacman-color -Syu'
    [2012-04-14 18:14] synchronizing package lists
    [2012-04-14 18:14] starting full system upgrade
    [2012-04-14 18:14] upgraded dbus-core (1.4.16-1 -> 1.4.20-2)
    [2012-04-14 18:14] upgraded dbus (1.4.16-1 -> 1.4.20-1)
    [2012-04-14 18:14] upgraded dbus-python (0.84.0-1 -> 1.0.0-1)
    [2012-04-14 18:14] upgraded garcon (0.1.11-1 -> 0.1.12-1)
    [2012-04-14 18:14] upgraded mkinitcpio (0.8.7-1 -> 0.8.7-2)
    [2012-04-14 18:14] upgraded qt (4.8.1-1 -> 4.8.1-2)
    [2012-04-14 18:15] upgraded wine (1.5.1-1 -> 1.5.2-1)
    [2012-04-14 18:15] upgraded xorg-server-common (1.12.0.902-1 -> 1.12.1-1)
    [2012-04-14 18:15] upgraded xorg-server (1.12.0.902-1 -> 1.12.1-1)
    dmesg;
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.3.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.3 (GCC) ) #1 SMP PREEMPT Tue Apr 3 06:46:17 UTC 2012
    [ 0.000000] Command line: root=/dev/disk/by-label/archroot ro
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
    [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 3205 06/07/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x430000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000430000000 aka 17152M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
    [ 0.000000] 0000000000 - 00c0000000 page 1G
    [ 0.000000] 00c0000000 - 00cfe00000 page 2M
    [ 0.000000] 00cfe00000 - 00cfe90000 page 4k
    [ 0.000000] kernel direct mapping tables up to cfe90000 @ 1fffd000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000430000000
    [ 0.000000] 0100000000 - 0400000000 page 1G
    [ 0.000000] 0400000000 - 0430000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 430000000 @ cfe8e000-cfe90000
    [ 0.000000] RAMDISK: 37d2b000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000fb860 00014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 00000000cfe90000 0003C (v01 060710 RSDT1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 060710 FACP1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120111/tbfadt-579)
    [ 0.000000] ACPI: DSDT 00000000cfe90450 0E856 (v01 A1160 A1160000 00000000 INTL 20060113)
    [ 0.000000] ACPI: FACS 00000000cfea8000 00040
    [ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 060710 APIC1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 060710 OEMMCFG 20100607 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 060710 OEMB1948 20100607 MSFT 00000097)
    [ 0.000000] ACPI: SRAT 00000000cfe9f450 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
    [ 0.000000] ACPI: HPET 00000000cfe9f540 00038 (v01 060710 OEMHPET 20100607 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
    [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
    [ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
    [ 0.000000] SRAT: Node 0 PXM 0 100000000-430000000
    [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
    [ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,430000000) -> [0,430000000)
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000430000000
    [ 0.000000] NODE_DATA [000000042fffb000 - 000000042fffffff]
    [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f600000-ffff88042f5fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00430000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000cfe90
    [ 0.000000] 0: 0x00100000 -> 0x00430000
    [ 0.000000] On node 0 totalpages: 4193823
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 831184 pages, LIFO batch:31
    [ 0.000000] Normal zone: 52224 pages used for memmap
    [ 0.000000] Normal zone: 3290112 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
    [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
    [ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
    [ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
    [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
    [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88042fc00000 s82176 r8192 d24320 u262144
    [ 0.000000] pcpu-alloc: s82176 r8192 d24320 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4125210
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/disk/by-label/archroot ro
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
    [ 0.000000] Memory: 16366888k/17563648k available (4507k kernel code, 788356k absent, 408404k reserved, 4315k data, 732k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:4352 nr_irqs:728 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3210.762 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6424.08 BogoMIPS (lpj=10702540)
    [ 0.003340] pid_max: default: 32768 minimum: 301
    [ 0.003356] Security Framework initialized
    [ 0.003360] AppArmor: AppArmor disabled by boot time parameter
    [ 0.004359] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.009978] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.011818] Mount-cache hash table entries: 256
    [ 0.011918] Initializing cgroup subsys cpuacct
    [ 0.011920] Initializing cgroup subsys memory
    [ 0.011926] Initializing cgroup subsys devices
    [ 0.011928] Initializing cgroup subsys freezer
    [ 0.011929] Initializing cgroup subsys net_cls
    [ 0.011931] Initializing cgroup subsys blkio
    [ 0.011952] tseg: 0000000000
    [ 0.011963] CPU: Physical Processor ID: 0
    [ 0.011964] CPU: Processor Core ID: 0
    [ 0.011966] mce: CPU supports 6 MCE banks
    [ 0.012513] ACPI: Core revision 20120111
    [ 0.016673] ftrace: allocating 17413 entries in 69 pages
    [ 0.023719] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058830] CPU0: AMD Phenom(tm) II X4 840 Processor stepping 03
    [ 0.059996] Performance Events: AMD PMU driver.
    [ 0.059996] ... version: 0
    [ 0.059996] ... bit width: 48
    [ 0.059996] ... generic registers: 4
    [ 0.059996] ... value mask: 0000ffffffffffff
    [ 0.059996] ... max period: 00007fffffffffff
    [ 0.059996] ... fixed-purpose events: 0
    [ 0.059996] ... event mask: 000000000000000f
    [ 0.076711] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.103360] Booting Node 0, Processors #1
    [ 0.103363] smpboot cpu 1: start_ip = 9a000
    [ 0.116684] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.136704] #2
    [ 0.136706] smpboot cpu 2: start_ip = 9a000
    [ 0.150015] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.170030] #3
    [ 0.170032] smpboot cpu 3: start_ip = 9a000
    [ 0.183357] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.190007] Brought up 4 CPUs
    [ 0.190010] Total of 4 processors activated (25696.35 BogoMIPS).
    [ 0.190521] devtmpfs: initialized
    [ 0.191849] PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
    [ 0.191849] NET: Registered protocol family 16
    [ 0.191849] node 0 link 0: io port [1000, ffffff]
    [ 0.191849] TOM: 00000000d0000000 aka 3328M
    [ 0.191849] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    [ 0.191849] node 0 link 0: mmio [e0000000, efffffff] ==> none
    [ 0.191849] node 0 link 0: mmio [f0000000, ffffffff]
    [ 0.191849] node 0 link 0: mmio [a0000, bffff]
    [ 0.191849] node 0 link 0: mmio [d0000000, dfffffff]
    [ 0.191849] TOM2: 0000000430000000 aka 17152M
    [ 0.191849] bus: [00, 07] on node 0 link 0
    [ 0.191849] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.191849] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
    [ 0.191849] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
    [ 0.191849] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
    [ 0.191849] bus: 00 index 4 [mem 0x430000000-0xfcffffffff]
    [ 0.191849] ACPI: bus type pci registered
    [ 0.191849] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.191849] PCI: not using MMCONFIG
    [ 0.191849] PCI: Using configuration type 1 for base access
    [ 0.191849] PCI: Using configuration type 1 for extended access
    [ 0.191849] mtrr: your CPUs had inconsistent fixed MTRR settings
    [ 0.191849] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.191849] mtrr: corrected configuration.
    [ 0.193356] bio: create slab <bio-0> at 0
    [ 0.193359] ACPI: Added _OSI(Module Device)
    [ 0.193359] ACPI: Added _OSI(Processor Device)
    [ 0.193359] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.193359] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.194088] ACPI: EC: Look up EC in DSDT
    [ 0.195267] ACPI: Executed 3 blocks of module-level executable AML code
    [ 0.263709] ACPI: Interpreter enabled
    [ 0.263714] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.263732] ACPI: Using IOAPIC for interrupt routing
    [ 0.263752] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.264484] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.284239] ACPI: No dock devices found.
    [ 0.284239] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.284239] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.284239] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
    [ 0.284239] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [ 0.284239] PCI host bridge to bus 0000:00
    [ 0.284239] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.284239] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
    [ 0.284239] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.284246] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
    [ 0.284258] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.284295] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.284329] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.284346] pci 0000:00:06.0: [1002:597c] type 1 class 0x000604
    [ 0.284380] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [ 0.284393] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
    [ 0.284426] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.284455] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
    [ 0.284474] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
    [ 0.284484] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
    [ 0.284493] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
    [ 0.284502] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
    [ 0.284512] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
    [ 0.284521] pci 0000:00:11.0: reg 24: [mem 0xfbcfe400-0xfbcfe7ff]
    [ 0.284541] pci 0000:00:11.0: set SATA to AHCI mode
    [ 0.284589] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [ 0.284602] pci 0000:00:12.0: reg 10: [mem 0xfbcf6000-0xfbcf6fff]
    [ 0.284667] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
    [ 0.284680] pci 0000:00:12.1: reg 10: [mem 0xfbcf7000-0xfbcf7fff]
    [ 0.284750] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [ 0.284769] pci 0000:00:12.2: reg 10: [mem 0xfbcfe800-0xfbcfe8ff]
    [ 0.284853] pci 0000:00:12.2: supports D1 D2
    [ 0.284854] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.284878] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [ 0.284891] pci 0000:00:13.0: reg 10: [mem 0xfbcfc000-0xfbcfcfff]
    [ 0.284956] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
    [ 0.284969] pci 0000:00:13.1: reg 10: [mem 0xfbcfd000-0xfbcfdfff]
    [ 0.285039] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [ 0.285058] pci 0000:00:13.2: reg 10: [mem 0xfbcfec00-0xfbcfecff]
    [ 0.285142] pci 0000:00:13.2: supports D1 D2
    [ 0.285143] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.285169] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.286657] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [ 0.286673] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.286682] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.286691] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.286701] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.286710] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
    [ 0.286768] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.286789] pci 0000:00:14.2: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit]
    [ 0.286856] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.286871] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [ 0.286948] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.286990] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [ 0.287003] pci 0000:00:14.5: reg 10: [mem 0xfbcff000-0xfbcfffff]
    [ 0.287071] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [ 0.287088] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [ 0.287101] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [ 0.287115] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [ 0.287132] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [ 0.287184] pci 0000:04:00.0: [1002:6739] type 0 class 0x000300
    [ 0.287198] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.287209] pci 0000:04:00.0: reg 18: [mem 0xfbfc0000-0xfbfdffff 64bit]
    [ 0.287216] pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff]
    [ 0.287230] pci 0000:04:00.0: reg 30: [mem 0xfbfa0000-0xfbfbffff pref]
    [ 0.287263] pci 0000:04:00.0: supports D1 D2
    [ 0.287285] pci 0000:04:00.1: [1002:aa88] type 0 class 0x000403
    [ 0.287299] pci 0000:04:00.1: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
    [ 0.287363] pci 0000:04:00.1: supports D1 D2
    [ 0.293342] pci 0000:00:02.0: PCI bridge to [bus 04-04]
    [ 0.293347] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.293350] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.293353] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.293404] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.293419] pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
    [ 0.293443] pci 0000:03:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
    [ 0.293470] pci 0000:03:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref]
    [ 0.293533] pci 0000:03:00.0: supports D1 D2
    [ 0.293535] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.293557] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.293564] pci 0000:00:06.0: PCI bridge to [bus 03-03]
    [ 0.293567] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
    [ 0.293569] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.293618] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
    [ 0.293647] pci 0000:02:00.0: reg 10: [mem 0xfbdff800-0xfbdfffff 64bit]
    [ 0.293662] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
    [ 0.293790] pci 0000:02:00.0: supports D2
    [ 0.293792] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
    [ 0.300012] pci 0000:00:07.0: PCI bridge to [bus 02-02]
    [ 0.300017] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
    [ 0.300019] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.300085] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
    [ 0.300095] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.300096] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.300098] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.300100] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.300101] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
    [ 0.300103] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.300119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.300256] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.300277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
    [ 0.300294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
    [ 0.300325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [ 0.300363] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.300365] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.300366] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.303051] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
    [ 0.303079] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
    [ 0.303104] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
    [ 0.303127] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
    [ 0.303151] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [ 0.303175] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [ 0.303200] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
    [ 0.303224] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [ 0.303334] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.303336] vgaarb: loaded
    [ 0.303337] vgaarb: bridge control possible 0000:04:00.0
    [ 0.303372] PCI: Using ACPI for IRQ routing
    [ 0.312318] PCI: pci_cache_line_size set to 64 bytes
    [ 0.312324] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
    [ 0.312393] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.312395] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
    [ 0.312472] NetLabel: Initializing
    [ 0.312473] NetLabel: domain hash size = 128
    [ 0.312474] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.312483] NetLabel: unlabeled traffic allowed by default
    [ 0.312491] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.312493] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.314334] Switching to clocksource hpet
    [ 0.317535] pnp: PnP ACPI init
    [ 0.317549] ACPI: bus type pnp registered
    [ 0.317637] pnp 00:00: [bus 00-ff]
    [ 0.317639] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.317640] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.317641] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.317643] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.317644] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.317646] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
    [ 0.317649] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.317689] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.317713] pnp 00:01: [dma 4]
    [ 0.317714] pnp 00:01: [io 0x0000-0x000f]
    [ 0.317716] pnp 00:01: [io 0x0081-0x0083]
    [ 0.317717] pnp 00:01: [io 0x0087]
    [ 0.317718] pnp 00:01: [io 0x0089-0x008b]
    [ 0.317719] pnp 00:01: [io 0x008f]
    [ 0.317720] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.317739] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.317745] pnp 00:02: [io 0x0070-0x0071]
    [ 0.317753] pnp 00:02: [irq 8]
    [ 0.317770] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.317774] pnp 00:03: [io 0x0061]
    [ 0.317791] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.317797] pnp 00:04: [io 0x00f0-0x00ff]
    [ 0.317800] pnp 00:04: [irq 13]
    [ 0.317818] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.317846] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 0.317864] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.317910] pnp 00:06: [io 0x0060]
    [ 0.317911] pnp 00:06: [io 0x0064]
    [ 0.317913] pnp 00:06: [mem 0xfec00000-0xfec00fff]
    [ 0.317914] pnp 00:06: [mem 0xfee00000-0xfee00fff]
    [ 0.317955] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.317957] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.317959] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.318069] pnp 00:07: [io 0x0010-0x001f]
    [ 0.318071] pnp 00:07: [io 0x0022-0x003f]
    [ 0.318072] pnp 00:07: [io 0x0062-0x0063]
    [ 0.318073] pnp 00:07: [io 0x0065-0x006f]
    [ 0.318074] pnp 00:07: [io 0x0072-0x007f]
    [ 0.318075] pnp 00:07: [io 0x0080]
    [ 0.318077] pnp 00:07: [io 0x0084-0x0086]
    [ 0.318078] pnp 00:07: [io 0x0088]
    [ 0.318079] pnp 00:07: [io 0x008c-0x008e]
    [ 0.318080] pnp 00:07: [io 0x0090-0x009f]
    [ 0.318081] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.318082] pnp 00:07: [io 0x00b1]
    [ 0.318084] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.318085] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.318086] pnp 00:07: [io 0x040b]
    [ 0.318087] pnp 00:07: [io 0x04d6]
    [ 0.318088] pnp 00:07: [io 0x0c00-0x0c01]
    [ 0.318089] pnp 00:07: [io 0x0c14]
    [ 0.318090] pnp 00:07: [io 0x0c50-0x0c51]
    [ 0.318092] pnp 00:07: [io 0x0c52]
    [ 0.318093] pnp 00:07: [io 0x0c6c]
    [ 0.318094] pnp 00:07: [io 0x0c6f]
    [ 0.318095] pnp 00:07: [io 0x0cd0-0x0cd1]
    [ 0.318096] pnp 00:07: [io 0x0cd2-0x0cd3]
    [ 0.318099] pnp 00:07: [io 0x0cd4-0x0cd5]
    [ 0.318100] pnp 00:07: [io 0x0cd6-0x0cd7]
    [ 0.318101] pnp 00:07: [io 0x0cd8-0x0cdf]
    [ 0.318102] pnp 00:07: [io 0x0b00-0x0b3f]
    [ 0.318103] pnp 00:07: [io 0x0800-0x089f]
    [ 0.318105] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.318106] pnp 00:07: [io 0x0b00-0x0b0f]
    [ 0.318107] pnp 00:07: [io 0x0b20-0x0b3f]
    [ 0.318108] pnp 00:07: [io 0x0900-0x090f]
    [ 0.318110] pnp 00:07: [io 0x0910-0x091f]
    [ 0.318111] pnp 00:07: [io 0xfe00-0xfefe]
    [ 0.318112] pnp 00:07: [io 0x0060]
    [ 0.318113] pnp 00:07: [io 0x0064]
    [ 0.318114] pnp 00:07: [mem 0xcff00000-0xcfffffff]
    [ 0.318116] pnp 00:07: [mem 0xffb80000-0xffbfffff]
    [ 0.318117] pnp 00:07: [mem 0xfec10000-0xfec1001f]
    [ 0.318176] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.318178] system 00:07: [io 0x040b] has been reserved
    [ 0.318179] system 00:07: [io 0x04d6] has been reserved
    [ 0.318181] system 00:07: [io 0x0c00-0x0c01] has been reserved
    [ 0.318183] system 00:07: [io 0x0c14] has been reserved
    [ 0.318184] system 00:07: [io 0x0c50-0x0c51] has been reserved
    [ 0.318186] system 00:07: [io 0x0c52] has been reserved
    [ 0.318187] system 00:07: [io 0x0c6c] has been reserved
    [ 0.318189] system 00:07: [io 0x0c6f] has been reserved
    [ 0.318190] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.318192] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.318194] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.318195] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.318197] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.318199] system 00:07: [io 0x0b00-0x0b3f] has been reserved
    [ 0.318200] system 00:07: [io 0x0800-0x089f] has been reserved
    [ 0.318202] system 00:07: [io 0x0b00-0x0b0f] has been reserved
    [ 0.318204] system 00:07: [io 0x0b20-0x0b3f] has been reserved
    [ 0.318205] system 00:07: [io 0x0900-0x090f] has been reserved
    [ 0.318207] system 00:07: [io 0x0910-0x091f] has been reserved
    [ 0.318209] system 00:07: [io 0xfe00-0xfefe] has been reserved
    [ 0.318211] system 00:07: [mem 0xcff00000-0xcfffffff] has been reserved
    [ 0.318213] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
    [ 0.318214] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
    [ 0.318217] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.318531] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.318535] pnp 00:08: [irq 4]
    [ 0.318536] pnp 00:08: [dma 0 disabled]
    [ 0.318598] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.318929] pnp 00:09: [io 0x03f0-0x03f5]
    [ 0.318930] pnp 00:09: [io 0x03f7]
    [ 0.318933] pnp 00:09: [irq 6]
    [ 0.318934] pnp 00:09: [dma 2]
    [ 0.318969] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
    [ 0.319088] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.319090] pnp 00:0a: [io 0x0230-0x023f]
    [ 0.319091] pnp 00:0a: [io 0x0290-0x029f]
    [ 0.319092] pnp 00:0a: [io 0x0f40-0x0f4f]
    [ 0.319093] pnp 00:0a: [io 0x0a30-0x0a3f]
    [ 0.319126] system 00:0a: [io 0x0230-0x023f] has been reserved
    [ 0.319127] system 00:0a: [io 0x0290-0x029f] has been reserved
    [ 0.319129] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
    [ 0.319131] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
    [ 0.319133] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.319154] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.319183] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.319185] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.319881] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.319883] pnp 00:0c: [mem 0x000c0000-0x000cffff]
    [ 0.319885] pnp 00:0c: [mem 0x000e0000-0x000fffff]
    [ 0.319886] pnp 00:0c: [mem 0x00100000-0xcfefffff]
    [ 0.319887] pnp 00:0c: [mem 0xfec00000-0xffffffff]
    [ 0.319893] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319896] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319899] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319901] pnp 00:0c: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.319973] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
    [ 0.319976] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.320068] pnp: PnP ACPI: found 13 devices
    [ 0.320069] ACPI: ACPI bus type pnp unregistered
    [ 0.326686] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.326706] pci 0000:00:02.0: PCI bridge to [bus 04-04]
    [ 0.326709] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    [ 0.326711] pci 0000:00:02.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.326714] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.326717] pci 0000:00:06.0: PCI bridge to [bus 03-03]
    [ 0.326719] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
    [ 0.326722] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.326725] pci 0000:00:07.0: PCI bridge to [bus 02-02]
    [ 0.326727] pci 0000:00:07.0: bridge window [io 0xc000-0xcfff]
    [ 0.326730] pci 0000:00:07.0: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.326733] pci 0000:00:14.4: PCI bridge to [bus 01-01]
    [ 0.326770] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.326772] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.326773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.326775] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.326776] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
    [ 0.326778] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.326779] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.326781] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
    [ 0.326783] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.326784] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.326786] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
    [ 0.326788] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.326789] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
    [ 0.326791] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    [ 0.326792] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    [ 0.326794] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.326795] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.326797] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
    [ 0.326799] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.326829] NET: Registered protocol family 2
    [ 0.327110] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.328540] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.330488] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.330723] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.330725] TCP reno registered
    [ 0.330745] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.330836] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.330971] NET: Registered protocol family 1
    [ 0.756738] pci 0000:04:00.0: Boot video device
    [ 0.756749] PCI: CLS 64 bytes, default 64
    [ 0.756788] Unpacking initramfs...
    [ 0.798057] Freeing initrd memory: 2836k freed
    [ 0.800187] PCI-DMA: Disabling AGP.
    [ 0.800278] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 0.800280] PCI-DMA: using GART IOMMU.
    [ 0.800282] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 0.802774] IBS: LVT offset 1 assigned
    [ 0.802804] perf: AMD IBS detected (0x0000001f)
    [ 0.802963] audit: initializing netlink socket (disabled)
    [ 0.802978] type=2000 audit(1334050141.799:1): initialized
    [ 0.803936] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.806526] VFS: Disk quotas dquot_6.5.2
    [ 0.806569] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.806635] msgmni has been set to 32100
    [ 0.806971] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.807061] io scheduler noop registered
    [ 0.807064] io scheduler deadline registered
    [ 0.807124] io scheduler cfq registered (default)
    [ 0.807339] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.807533] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
    [ 0.807750] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
    [ 0.807957] GHES: HEST is not enabled!
    [ 0.808045] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.828667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.849559] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.849760] Linux agpgart interface v0.103
    [ 0.849805] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.850193] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.850234] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.850352] mousedev: PS/2 mouse device common for all mice
    [ 0.850406] rtc_cmos 00:02: RTC can wake from S4
    [ 0.850557] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.850580] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.850589] cpuidle: using governor ladder
    [ 0.850590] cpuidle: using governor menu
    [ 0.850724] TCP cubic registered
    [ 0.850812] NET: Registered protocol family 10
    [ 0.851112] NET: Registered protocol family 17
    [ 0.851114] Registering the dns_resolver key type
    [ 0.851253] PM: Hibernation image not present or could not be loaded.
    [ 0.851260] registered taskstats version 1
    [ 0.852170] rtc_cmos 00:02: setting system clock to 2012-04-10 09:29:02 UTC (1334050142)
    [ 0.852195] Initializing network drop monitor service
    [ 0.853114] Freeing unused kernel memory: 732k freed
    [ 0.853269] Write protecting the kernel read-only data: 8192k
    [ 0.857266] Freeing unused kernel memory: 1620k freed
    [ 0.859285] Freeing unused kernel memory: 660k freed
    [ 0.867016] udevd[74]: starting version 181
    [ 0.889751] SCSI subsystem initialized
    [ 0.890757] usbcore: registered new interface driver usbfs
    [ 0.890779] usbcore: registered new interface driver hub
    [ 0.891269] usbcore: registered new device driver usb
    [ 0.892313] libata version 3.00 loaded.
    [ 0.892491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.892633] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 0.892672] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 0.892682] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.892712] ehci_hcd 0000:00:12.2: debug port 1
    [ 0.892736] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcfe800
    [ 0.894588] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.900033] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.900335] hub 1-0:1.0: USB hub found
    [ 0.900340] hub 1-0:1.0: 6 ports detected
    [ 0.900579] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 0.900591] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 0.900599] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.900621] ehci_hcd 0000:00:13.2: debug port 1
    [ 0.900645] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcfec00
    [ 0.910028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.910295] hub 2-0:1.0: USB hub found
    [ 0.910299] hub 2-0:1.0: 6 ports detected
    [ 0.910565] ahci 0000:00:11.0: version 3.0
    [ 0.910649] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
    [ 0.910748] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 0.910751] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
    [ 0.913392] scsi0 : ahci
    [ 0.913744] scsi1 : ahci
    [ 0.913950] scsi2 : ahci
    [ 0.914322] scsi3 : ahci
    [ 0.914729] ata1: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe500 irq 43
    [ 0.914733] ata2: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe580 irq 43
    [ 0.914736] ata3: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe600 irq 43
    [ 0.914739] ata4: SATA max UDMA/133 abar m1024@0xfbcfe400 port 0xfbcfe680 irq 43
    [ 0.915322] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.915334] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [ 0.915365] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcf6000
    [ 0.970892] hub 3-0:1.0: USB hub found
    [ 0.970899] hub 3-0:1.0: 3 ports detected
    [ 0.971078] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [ 0.971089] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [ 0.971107] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcf7000
    [ 1.027554] hub 4-0:1.0: USB hub found
    [ 1.027561] hub 4-0:1.0: 3 ports detected
    [ 1.027748] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.027757] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 1.027782] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfc000
    [ 1.084224] hub 5-0:1.0: USB hub found
    [ 1.084230] hub 5-0:1.0: 3 ports detected
    [ 1.084422] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.084430] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [ 1.084446] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfd000
    [ 1.140874] hub 6-0:1.0: USB hub found
    [ 1.140880] hub 6-0:1.0: 3 ports detected
    [ 1.141059] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 1.141069] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [ 1.141087] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcff000
    [ 1.197575] hub 7-0:1.0: USB hub found
    [ 1.197581] hub 7-0:1.0: 2 ports detected
    [ 1.233428] ata1: SATA link down (SStatus 0 SControl 300)
    [ 1.233482] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.233530] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.233597] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.234129] pata_atiixp 0000:00:14.1: setting latency timer to 64
    [ 1.236194] scsi4 : pata_atiixp
    [ 1.236384] scsi5 : pata_atiixp
    [ 1.236884] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [ 1.236886] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [ 1.408804] ata5.00: ATA-7: GENERIC, BAJ41G20, max UDMA/133
    [ 1.408807] ata5.00: 398297088 sectors, multi 16: LBA48
    [ 1.422031] ata5.00: configured for UDMA/100
    [ 1.422229] scsi 4:0:0:0: Direct-Access ATA GENERIC BAJ4 PQ: 0 ANSI: 5
    [ 1.424626] sd 4:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
    [ 1.424739] sd 4:0:0:0: [sda] Write Protect is off
    [ 1.424741] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.424759] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.487336] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    [ 1.488267] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 1.510062] usb 3-3: new low-speed USB device number 2 using ohci_hcd
    [ 1.677918] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
    [ 1.678062] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:12.0-3/input0
    [ 1.678078] usbcore: registered new interface driver usbhid
    [ 1.678079] usbhid: USB HID core driver
    [ 1.776721] usb 2-6: new high-speed USB device number 2 using ehci_hcd
    [ 1.803379] Refined TSC clocksource calibration: 3210.938 MHz.
    [ 1.803389] Switching to clocksource tsc
    [ 2.366725] usb 4-1: new full-speed USB device number 2 using ohci_hcd
    [ 2.415746] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.530590] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1
    [ 2.530660] generic-usb 0003:24AE:2000.0002: input,hidraw1: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:12.1-1/input0
    [ 2.536738] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input2
    [ 2.536864] generic-usb 0003:24AE:2000.0003: input,hiddev0,hidraw2: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:12.1-1/input1
    [ 4.045730] udevd[189]: starting version 181
    [ 5.247350] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 5.247408] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 5.254193] EDAC MC: Ver: 2.1.0
    [ 5.347684] Linux media interface: v0.10
    [ 5.401241] MCE: In-kernel MCE decoding enabled.
    [ 5.406762] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
    [ 5.410134] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 5.410236] ACPI: Power Button [PWRB]
    [ 5.410305] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.410331] ACPI: Power Button [PWRF]
    [ 5.423440] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.427224] wmi: Mapper loaded
    [ 5.442807] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 5.442941] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 5.443253] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc9001269c000, 20:cf:30:19:3e:02, XID 18000000 IRQ 44
    [ 5.443255] r8169 0000:03:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
    [ 5.465393] AMD64 EDAC driver v3.4.0
    [ 5.465442] Floppy drive(s): fd0 is 1.44M
    [ 5.465464] EDAC amd64: DRAM ECC disabled.
    [ 5.466318] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module wil

    Hm, dis- and reconnecting the graphics card solved the problem. Did this because I figured a hardware problem after freezes in three different live systems.
    Last edited by null (2012-04-15 11:32:41)

  • Macbook pro freezes after login

    I have a mid-2010 MacBook Pro 15" with a Core i7 2.66GHz processor. Sometime after upgrading to Lion, I started getting the spinning beachball of death just after login. Unlike many posts about freezes on similar MacBook Pros, mine is not freezing before login, but after. I start the machine, login, and then if I try to open any application, the beachball appears and I have to do a hard shutdown with the power button. Then if I restart again, it is usually fine. I was able to fix this problem some time ago by deleting a preference file (plist) for one of my apps (I think), but the problem has surfaced again and I cannot remember how to correct this. Anyone having similar problems, please let me know if you've had any luck fixing it. I am running 10.7.3 (in fact, it seems like the problem may have resurfaced just after the update to 10.7.3, but I'm not sure.)
    FYI, I have auto graphics switching off and am still experiencing this problem.

    Don't worry about the auto graphics switching. Go to "Users &amp; Groups" in system preferences. Then click on login items and removes all of them. I haven't pinned down exactly which one was causing the problem but I suspect it was one associated with my HP printer.  I have verified that Dropbox and Magic Menu from StuffIt are OK to leave in the login items.  Just remove what you have there and add them back in one at time (if you can't live without them) until it starts to give you trouble again. Let me know if this helps.

  • Another (yet different) finder freeze and login

    So my usually bulletproof TiBook just started freezing at login. Specifically, 10.4.9 launches perfectly up to the login screen. I type in my password (I only have 1 user+root) and the login screen fades to blue. And stays with the Apple blue background. The hard drive doesn't spin-the computer just sits there.
    Some useful info:
    This started when I tried uninstall some user added preference panes that I didn't need/want anymore. One was the StuffIt AVR pane. The others were Silk, ShapeShifter, and Application Enahncer.
    After logging in as a root user and deactivating AE, I was able to get a little further in logging in–my usual background would launch and I would get the Spotlight icon in the upper right, but that's it. If I move the cursor over the Spotlight icon, I get the spinning beach ball.
    The last work I did before it started not logging in was to remove the StuffIt pane. I didn't think I had the uninstaller so I personall trashed the pane. Then I found the uninstaller and ran it, removing AVR and MagicMenu (which I think is the real culprit).
    I've tried reinstalling StuffIt from the root account, resetting holding down power until the beep and restarting holding down apple-option-o-f. Needless to say, I never had a problem with all these preference panes until I went to uninstall them....
    Thanks for the tips!

    Hello theredf:
    Welcome to Apple discussions.
    You might try running repair disk from your software install DVD.
    If that does not help, I would consider an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    A&I will install a fresh copy of OS X while preserving your files, programs, and settings. As always, it is good practice to back up before any software changes. You would, of course, need to update to current software levels (OS X 10.4.10 is current).
    Barry

  • 10.4 machines freeze at login

    This morning all machines with 10.4.X on them in the high school freeze at login to the network, you can login locally fine. Any Leopard machines can login as usual. Anyone have any idea why the 10.4 machines which worked fine yesterday are having a problem today?
    When I looked in server log I found this multiple times... but I have no idea how to fix.
    Sep 9 09:06:51 Xserve servermgrd: servermgr_dns: no hostname set and unable to detect via DNS, services may not function properly - use changeip to repair
    Any of these make sense to anyone?
    Thank you!
    Patty

    Hi Mitzi,
    You might see some helpful information in these links that I found:
    [Here|http://discussions.apple.com/thread.jspa?messageID=2094827]
    [or Here|http://forums.macnn.com/92/networking/308109/mac-os-x-10-4-server>
    I'm not a server guru, but I'm sure someone else around here is.

  • MBP freezes at login - Please help!

    hey all!
    please,please, please help me...
    ...just now it started that my mbp crashes (or freezes) at the login.
    yes, i have installed all updates and firmware etc. but days or weeks ago and till now it worked without any problems.
    i get to the login screen and see the cursor blink once and then it is gone and i can't sign in.
    i did a restart in safemode and repaired the rights and checked the volume (which is ok) but still it freezes.
    adobe version cue is not installed (or any other startup item).
    i'm quite new to the mac so could anybody please help me out here?
    thank you!

    Oddly, mine is doind the same. It was working fine on Monday. I left it overnight to let the UNIX processes run overnight.
    Had a day off yesterday. Came in this morning to find the machine locked solid and roasting hot!!
    I have used the install disc and repaired permissions and repaired the disc. No use.
    I have reinstalled the OS from the supplied discs and run the updates and still it freezes at login. I get as far as selecting my user and typing the password and then it freezes.
    I'm now going through the safe boot option. After that I'm going to have to rebuild my account since it is the only thing left.
    I don't understand how the machine can chew itself up so much overnight that it hangs.
    I have to be honest and say that I'm less impressed with the MBP. My old 700MHz G3 iBook works better than this.
    The powersupply (I think) whines at me.
    The wireless connection is a best, flakey
    The OS seems to want to crumble under it's own weight.
    Oh...and now the it has rebooted it can't get past the 'Starting Mac OS X....' screen.
    If anyone has any bright ideas I would appreciate them. I'm now going to boot in single user mode and do apples recommended pokes to see what happens.

  • One user freezes after login

    One user on my computer (G5 1.6Ghz running 10.4.11) freezes after login. All the desktop items appear, as does the menu bar. But within a few seconds of this, the spinning beachball appears and everything becomes unresponsive (including force quit). If I login while holding shift everything works fine.
    All the other accounts are working normally.
    What should I do? I've removed everything from login items, but it still freezes.

    Thanks for this. I did all this, but it still did not help. I then tried totally uninstalling little snitch, and the problem went away. After installing the newest version, everything seems to be working again.
    Seems odd as I've been using little snitch (version 1.x) for years with no problems. Using 2.0.4 now and all is fine, so I'm happy.

  • [SOLVED] Steam troubles. Segfault after login.

    Hello. I'm usually pretty good about solving my own problems, but this one has me beat. So, yay, first post.
    Recently my nephew brought me his computer for a nuke and pave, and since he doesn't have a legit Windows key and I don't use Windows anymore I decided to install Arch on his machine, since it's what I use and I'm their go-to tech support.
    Unfortunately I'm having trouble getting Steam to run correctly on his machine. It will start up, update/verify install, show the login screen, and after authenticating it promptly dies.
    Some details:
    This is a somewhat fresh install. I provisioned it from within a Vbox VM on my own workstation and then moved the HDD to the actual box.
    Full system update was done just today. Problem existed prior and persists after.
    Proprietary GPU drivers are not being used.
    lspci shows the video adapter to be: 07:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GS] (rev a1)
    I've already removed Steam's bundled libs, as per the wiki.
    I've tried steam --reset and rm -rf ~/.steam and removing and reinstalling the steam package. No dice.
    The presentation of problems detailed here seemed pretty similar so I installed lib32-dbus but this did not resolve the issue.
    I'm not checking remember password. This bug seems to be unrelated
    Console output:
    Running Steam on arch 64-bit
    STEAM_RUNTIME is enabled automatically
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steamwebhelper)/version(20141121162341)
    Installing breakpad exception handler for appid(steamwebhelper)/version(1416587021)
    Installing breakpad exception handler for appid(steamwebhelper)/version(20141121162341)
    Installing breakpad exception handler for appid(steamwebhelper)/version(1416587021)
    Installing breakpad exception handler for appid(steamwebhelper)/version(1416587021)
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    FillInMachineIDInfo took a total of 0 milliseconds
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    PulseAudio connect failed (used only for Mic Volume Control) with error: Access denied
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Generating new string page texture 7: 128x256, total string texture memory is 131.07 KB
    Generating new string page texture 8: 48x256, total string texture memory is 180.22 KB
    Generating new string page texture 9: 256x256, total string texture memory is 442.37 KB
    Generating new string page texture 10: 64x256, total string texture memory is 507.90 KB
    Generating new string page texture 11: 8x256, total string texture memory is 516.10 KB
    Generating new string page texture 12: 16x256, total string texture memory is 532.48 KB
    Generating new string page texture 13: 24x256, total string texture memory is 557.06 KB
    Generating new string page texture 14: 32x256, total string texture memory is 589.82 KB
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Have a ping of 38 MS which is under threshold of 50 MS, and have been trying for 297 MS - good enough
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    Adding licenses for the following package(s): 0, 470, 1861, 2835, 7932, 8183, 11072, 11416, 17111, 18343, 27723, 27968, 28233, 28315, 29145, 29470, 32848, 33954, 37125, 39202, 41566, 43104, 43386, 45658
    roaming config store loaded successfully - 650 bytes.
    migrating temporary roaming config store
    Failed to init SteamVR because it isn't installed
    ExecCommandLine: ""/home/austin/.local/share/Steam/ubuntu12_32/steam" "
    System startup time: 23.43 seconds
    Installing breakpad exception handler for appid(steam)/version(1416617579)
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:6806): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    [1224/194751:ERROR:renderer_main.cc(227)] Running without renderer sandbox
    Uploading dump (out-of-process) [proxy '']
    /tmp/dumps/assert_20141224194726_1.dmp
    Running Steam on arch 64-bit
    STEAM_RUNTIME has been set by the user to: /home/austin/.local/share/Steam/ubuntu12_32/steam-runtime
    /home/austin/.local/share/Steam/steam.sh: line 729: 6806 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$STEAMEXEPATH" "$@"
    Requested Force create but SharedObjectMutex already created
    Forced create but already created for SharedObjectEvent
    Forced create but already created for SharedObjectEvent
    Finished uploading minidump (out-of-process): success = yes
    response: CrashID=bp-e3676b84-8218-411b-8500-189492141225
    I then tried DEBUGGER=gdb steam and besides the identical output above and the expected gdb messages I get
    Program received signal SIGSEGV, Segmentation fault.
    0xf6d9eab8 in ?? () from /usr/lib32/xorg/modules/dri/nouveau_dri.so
    So then I tried native runtime STEAM_RUNTIME=0 steam with the help of the alucryd-multilib repo. The output seems to be identical to the above. Output of DEBUGGER=gdb STEAM_RUNTIME=0 steam available here.
    Throwing that into Google yields nothing of interest that I can find.
    Perhaps hardware failure? But my nephew played Dust AET for a while and it ran fine.
    I'm at a loss.
    Last edited by Xaekai (2014-12-29 11:17:11)

    I'm also in a similar situation, surprised that it took this long for someone to post the problem here (it's been at least a week since this started)...
    There's a report here:
    https://github.com/ValveSoftware/steam- … -67916730\
    I also get a segfault when running steam with STEAM_RUNTIME disabled now.
    Here's my command line output: https://gist.github.com/uberscientist/0 … 26de094ec5
    With STEAM_RUNTIME libs it runs fine (however TF2 fails to start...)
    If I can provide any more useful information let me know. I am running Arch Linux, systemd (so OpenRC probably has nothing to do with it), x86_64.
    I'll subscribe to this topic and continue crossing my fingers an update fixes things.

  • [SOLVED] steam: missing libc.so.6

    I'm getting the following error when trying to run steam:
    lllars ~ $ steam
    Running Steam on arch rolling 64-bit
    STEAM_RUNTIME is enabled automatically
    Error: You are missing the following 32-bit libraries, and Steam may not run:
    libc.so.6
    /home/lllars/.local/share/Steam/steam.sh: line 716: /home/lllars/.local/share/Steam/ubuntu12_32/steam: Permission denied
    Installing bootstrap /home/lllars/.local/share/Steam/bootstrap.tar.xz
    Restarting Steam by request...
    Running Steam on arch rolling 64-bit
    STEAM_RUNTIME has been set by the user to: /home/lllars/.local/share/Steam/ubuntu12_32/steam-runtime
    Error: You are missing the following 32-bit libraries, and Steam may not run:
    libc.so.6
    /home/lllars/.local/share/Steam/steam.sh: line 716: /home/lllars/.local/share/Steam/ubuntu12_32/steam: Permission denied
    lllars ~ $ pacman -Ss lib32-glibc
    multilib/lib32-glibc 2.18-8 [installed]
    GNU C Library for multilib
    any ideas?
    [SOLVED] /usr/lib/ld-linux.so.2 was erroneously linked to an old version of the library
    Last edited by lllars (2013-11-13 21:53:12)

    Btw, I intentionally deleted the .local/share/Steam directory this morning while troubleshooting this problem.  It recreated the directory the next time I tried to run it.  So, everything in there should be default.
    lllars ~ $ ls -l /home/lllars/.local/share/Steam/steam.sh
    -rwx------ 1 lllars users 21689 Oct 8 13:56 /home/lllars/.local/share/Steam/steam.sh
    lllars ~ $ mount
    proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
    sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
    dev on /dev type devtmpfs (rw,nosuid,relatime,size=4043580k,nr_inodes=1010895,mode=755)
    run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
    /dev/sda2 on / type ext4 (rw,relatime,data=ordered)
    securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
    tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev,relatime)
    devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
    tmpfs on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,mode=755)
    cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd)
    pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
    cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
    cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu)
    cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
    cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
    cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
    cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)
    cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
    systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=300,minproto=5,maxproto=5,direct)
    binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
    mqueue on /dev/mqueue type mqueue (rw,relatime)
    hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
    tmpfs on /tmp type tmpfs (rw)
    debugfs on /sys/kernel/debug type debugfs (rw,relatime)
    configfs on /sys/kernel/config type configfs (rw,relatime)
    /dev/sda5 on /home type ext4 (rw,relatime,data=ordered)

  • [SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

    After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
    So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
    But the same thing happens in comand line only mode.
    Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
    Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
    Last edited by schlumpfimsumpf (2014-04-10 19:16:57)

    Me wrote:
    It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
    H/W path Device Class Description
    ===============================================
    system GA-970A-UD3
    /0 bus GA-970A-UD3
    /0/0 memory 128KiB BIOS
    /0/4 processor Athlon
    /0/4/a memory 128KiB L1 cache
    /0/4/c memory 2MiB L3 cache
    /0/b memory 128KiB L1 cache
    /0/29 memory 8GiB System Memory
    /0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
    /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
    /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
    /0/100/2/0 display GF106 [GeForce GTS 450]
    /0/100/2/0.1 multimedia GF106 High Definition Audio Controller
    /0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
    /0/100/4/0 bus EJ168 USB 3.0 Host Controller
    /0/100/4/0/0 usb3 bus xHCI Host Controller
    /0/100/4/0/0/2 storage ADATA USB Flash Drive
    /0/100/4/0/1 usb2 bus xHCI Host Controller
    /0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
    /0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    /0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
    /0/100/a/0 bus EJ168 USB 3.0 Host Controller
    /0/100/a/0/0 usb8 bus xHCI Host Controller
    /0/100/a/0/1 usb7 bus xHCI Host Controller
    /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/12/1 usb6 bus OHCI Host Controller
    /0/100/12/1/5 input M Dongle
    /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/12.2/1 usb1 bus EHCI Host Controller
    /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/13/1 usb9 bus OHCI Host Controller
    /0/100/13/1/1 input USB Receiver
    /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/13.2/1 usb4 bus EHCI Host Controller
    /0/100/14 bus SBx00 SMBus Controller
    /0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
    /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
    /0/100/14.4 bridge SBx00 PCI to PCI Bridge
    /0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
    /0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
    /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    /0/100/14.5/1 usb10 bus OHCI Host Controller
    /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
    /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/16/1 usb11 bus OHCI Host Controller
    /0/100/16/1/3 multimedia USB Web Camera
    /0/100/16/1/4 multimedia USB Sound Device
    /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/16.2/1 usb5 bus EHCI Host Controller
    /0/101 bridge Family 15h Processor Function 0
    /0/102 bridge Family 15h Processor Function 1
    /0/103 bridge Family 15h Processor Function 2
    /0/104 bridge Family 15h Processor Function 3
    /0/105 bridge Family 15h Processor Function 4
    /0/106 bridge Family 15h Processor Function 5
    /1 scsi6 storage
    Working again. I think problem was the partition was full.
    Last edited by gyurman (2014-04-13 07:51:22)

  • Mac book pro freezes at login after upgrade to mavericks

    Hi Peeps,
    I'm new to Apple and this is my first Mac Book Pro... I bought it Oktober last year...
    Today i wanted to upgrade to Mavericks... All went well, the mac installed... and now it is done.... The system launches until the login screen and then freezes... I've been reading about it on al possible forums... Don't know what to do and in two days i leave abroad again far away from civilization... this mac is my only connection to home and the normal world so yes..i'm a bit desperate
    I tried the cmd+R thing to reinstall the OS X - same result...
    Bit afraid to do this erase thing cause i'm not sure to do it right - cannot really afford to loose data on this pc apart from the OS.
    Stupid me i didn't make a backup with Time machine or something else... can anyone please help me out here ????
    Any advice is welcome...
    Thanks all !!
    Luc
    <Email Edited by Host>

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Upgraded MacBookPro6,2 to Lion and now computer freezes before login

    Hi everyone,
    As the subjed line says, I upgraded to Lion and everything smoothly (aparently), but after I tried to install Xcode for Lion the pc started getting slower and slower. The 10.7 Core libraries never installed (kept failing) and now the computer freezes before I can login. I tried to reinstall Lion (Pressing ⌘+R after hard powerdown) and following the prompts, but that failed. No reasons why, it just said user cancelled.
    Before I wipe out my hard drive, is there something else I can do? Any help is appreciated.
    Thanks

    I am typing this reply from my MacBook Pro after recovering from the problem above. This post is for anyone else who might have the same problem. These are the steps to follow to be able to log back in:
    Power down the computer and then press ⌘+R while powering up. This is called Lion Recovery, according to this knowledge base article: http://support.apple.com/kb/HT4718
    In the options presented, select Disk Utility and verify the hard drive (HD) and repair the permissions on it. If your HD is not OK after verifying it, you will need to repair the HD as well.
    Once the step above is complete, restart the computer.
    Log in as normal.
    Once you log in, it is important to find and solve whatever is causing the freeze.
    In my case, it was a botched Xcode installation. If you do not fix the problem, the computer will freeze again next time you restart it, so make sure you check everything and uninstall anything that you may have installed recently. Some Adobe applications have known issues as of this posting (July 2011), so definitely remove anything new from Adobe you may have installed after upgrading to Lion or in the last couple of weeks.
    Final note: If you cannot find the problem and your computer freezes again the next time you restart, you can regain access to it by following the steps above. Follow them, log in and make a backup of your important stuff and either go back to Leopard or contact Apple support for further instructions.
    Good luck!

  • [SOLVED]Shutown freeze on unmounting

    Problem has solved,Just follow this post and reboot for twice:https://bbs.archlinux.org/viewtopic.php?id=130868&p=1
    I have newly installed archlinux on my ThinkPad T420 and almost everything works fine.But one problem is it can't shutdown properly,it seems hang on shutdown or reboot.Hard disk stopped running,but bluetooth LED is still powered...
    I have tried official 3.1.9-2 Linux kernel and 3.2.1 Linux-ck kernel but none of them works for me.
    Checked logs I didnt found anything that unusual,system seems down,but not halt.If i press power button for 4s,I can hear a sound that hard disk illegal turn off
    --------------------update-----------------
    I switch to tty1 and login as root,and execute shutdown -h now,and i found system freeze at unmounting Non-API filesystems.
    I install arch using 2011.8.19 iso last Monday.Will filesystem conflicts with mtab?
    my fstab
    # /etc/fstab: static file system information
    # <file system>    <dir>    <type>    <options>    <dump>    <pass>
    tmpfs        /tmp    tmpfs    nodev,nosuid    0    0
    /dev/sda1 /boot ext2 defaults 0 1
    /dev/sda2 / ext4 defaults,noatime 0 1
    /dev/sda3 /home ext4 defaults,noatime 0 1
    /dev/sda4 swap swap defaults 0 0
    and mtab
    rootfs / rootfs rw 0 0
    proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
    /sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
    /dev /dev devtmpfs rw,nosuid,relatime,size=1962760k,nr_inodes=490690,mode=755 0 0
    /run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
    /dev/sda2 / ext4 rw,noatime,user_xattr,acl,barrier=1,data=ordered 0 0
    devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
    tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
    /dev/sda1 /boot ext2 rw,relatime,errors=continue 0 0
    /dev/sda3 /home ext4 rw,noatime,user_xattr,acl,barrier=1,data=ordered 0 0
    gvfs-fuse-daemon /home/phoenix/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
    Any idea?
    Thanks in advance.
    Last edited by phoenixlzx (2012-01-22 13:30:33)

    prometej wrote:
    Did you try to check/configure your ACPI settings? It seems that some Thinkpads need special modules (ibm_acpi/thinpad_acpi) for proper operation.
    Take a look this tutorials:
    ACPID: https://wiki.archlinux.org/index.php/Acpid
    ACPI modules: https://wiki.archlinux.org/index.php/ACPI_modules
    Also try ThinkWiki: http://www.thinkwiki.org/wiki/ThinkWiki and http://www.thinkwiki.org/wiki/How_to_make_ACPI_work
    I checked my ACPI settings.
    dmesg | grep acpi
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    2.265357] acpi device:01: registered as cooling_device0
    [    6.636950] ACPI: acpi_idle yielding to intel_idle
    [    6.653404] acpi_call: Module loaded successfully
    [    7.184805] thinkpad_acpi: ThinkPad ACPI Extras v0.24
    [    7.184806] thinkpad_acpi: http://ibm-acpi.sf.net/
    [    7.184808] thinkpad_acpi: ThinkPad BIOS 83ET60WW (1.30 ), EC unknown
    [    7.184809] thinkpad_acpi: Lenovo ThinkPad T420, model 4180J4C
    [    7.185190] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
    [    7.185307] thinkpad_acpi: radio switch found; radios are enabled
    [    7.186752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
    [    7.187112] Registered led device: tpacpi::thinklight
    [    7.187143] Registered led device: tpacpi::power
    [    7.187204] Registered led device: tpacpi::standby
    [    7.187221] Registered led device: tpacpi::thinkvantage
    [    7.187229] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
    [    7.187354] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
    [    7.188091] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
    And below is /etc/acpi.conf
    sudo ls -l /lib/modules/$(uname -r)/kernel/drivers/acpi
    -rw-r--r-- 1 root root  2366  1月 14 16:18 ac.ko.gz
    -rw-r--r-- 1 root root 11624  1月 16 18:15 acpi_call.ko
    -rw-r--r-- 1 root root  3336  1月 14 16:18 acpi_ipmi.ko.gz
    -rw-r--r-- 1 root root  3692  1月 14 16:18 acpi_memhotplug.ko.gz
    -rw-r--r-- 1 root root  5147  1月 14 16:18 acpi_pad.ko.gz
    drwxr-xr-x 2 root root  4096  1月 14 16:20 apei
    -rw-r--r-- 1 root root  5443  1月 14 16:18 battery.ko.gz
    -rw-r--r-- 1 root root  4239  1月 14 16:18 button.ko.gz
    -rw-r--r-- 1 root root  2458  1月 14 16:18 container.ko.gz
    -rw-r--r-- 1 root root  1702  1月 14 16:18 custom_method.ko.gz
    -rw-r--r-- 1 root root  2125  1月 14 16:18 ec_sys.ko.gz
    -rw-r--r-- 1 root root  2195  1月 14 16:18 fan.ko.gz
    -rw-r--r-- 1 root root  3552  1月 14 16:18 pci_slot.ko.gz
    -rw-r--r-- 1 root root 19328  1月 14 16:18 processor.ko.gz
    -rw-r--r-- 1 root root  3555  1月 14 16:18 sbshc.ko.gz
    -rw-r--r-- 1 root root  5094  1月 14 16:18 sbs.ko.gz
    -rw-r--r-- 1 root root  6685  1月 14 16:18 thermal.ko.gz
    -rw-r--r-- 1 root root  9750  1月 14 16:18 video.ko.gz

  • IMac - freezing during login

    I have noticed recently my iMac is freezing when logging in. When you enter your password and press "enter" the machine freezes, mouse moves but no keyboard. I have left the machine to see if it eventual logs in - but no. The only way to solve the problem is to power off the machine and power it back on, work for a few days but freezes again.  
    Machine Spec - iMac 3.2GHz, Intel Core i3, 4GB Ram, HDD 1TB, OSx 10.8.4.
    Has anybody seen this issue or can point me to a similar forum thread. Thanks

    Hello,
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    And/Or...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Hi, i got a mbp retina display 1month ago, IT KEEPS FREEZING AT LOGIN

    i got this macbook pro retina display at bestbuy about a month ago and traveled out of the country, one day i was watching a movie and the computer froze. i restarted the mbp, but it would always freeze immediately after login in. i use safe mode, perform all troubleshooting skills i know, but it won work after login. it works in safemode. i erase the system did a complete format, reinstalled via apple servers (btw, it cost me about100 USD because bandwidth here is sooo expensive!. after i finished the installation, it got to the login page , i put in user details......it freezes again.... i dont know what to do....i love this machine.

    Still in Safe Mode, go back to
     > System Preferences... Users & Groups
    and create a new Admin account with a different name.
    Reboot the mac and try to login to the new account.
    Does that login OK or not?
    If you cannot login to that either, you need to reinstall Lion from the Recovery disk.
    If you CAN login to that account without problems, post back here for advice on how to solve the problems with your affected user account.

Maybe you are looking for

  • Cannot connect samsung hdtv to imac

    Hi Accidently posted this on intel forum but someone suggested this is correct place. Have 2.7ghz I5 21 inch Mac with OSX with 10.7.4 version. Have purchased new Samsung 7500 HDTV and cannot connect the two. Have purchased Thunderbolt to HDMI convert

  • Comparing two checkboxes in a SQL based report

    Hi, I have a SQL report using two apex_item.checkbox and I want to toggle between the two check boxes so only one is checked per row. Any pointers on how to achieve this would be great. Using Apex 4.02 on 11.2 DB. Regards SJC.

  • MRP Control of a Material

    Can we control planning for a material in such a way that it should be planned for some sales order items while some other sales order items having same material must not be planned. This has to be controlled on a sales order item status. if the stat

  • I need to cancel the previous game purchase that is not uploaded yet.

    My niece plated games in my IPAD2 and accidentally purchase coins in the games but not continue since my credit card security # not entered. Now everytime I downloded free games it keeps on asking to provide the security key in order to continue the

  • AAA authentication / Radius-Servers

                       Hello cisco folks, Have a technical question I would like to ask. I'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it