[SOLVED] Stop first 20 boot messages clearing

How to stop the first 20 or so, boot messages clearing? Petty sure this happened after a previous systemd update.
I know about changing TTYVTDisallocate to no - https://wiki.archlinux.org/index.php/Sy … er_boot.3F - but this only keeps the remaining messages on screen.
Last edited by Colanco (2013-08-12 07:58:49)

Colanco wrote:Solved this on my particular setup by doing the following:
Thanks for posting this - really appreciate it.
1. Enabled 'early KMS start' by adding radeon to MODULES line in /etc/mkinitcpio.conf:
https://wiki.archlinux.org/index.php/KM … _KMS_start
This was needed to stop console is being reset by the graphics module in Late KMS Start (default) thus clearing boot messages before module was loaded.
OK. So I guess early KMS is not my problem .
2. Change TTYVTDisallocate to no in [email protected] to stop boot message clearing:
https://wiki.archlinux.org/index.php/Di … t_Messages
This does not seem like the right way to do this but I'm not entirely sure what is. I think that what is in that directory should be just a symlink.
The recommended way to edit unit files is at https://wiki.archlinux.org/index.php/Sy … unit_files. However, I'm not clear quite how to apply that in this case. What I'm currently trying is
$ cat /etc/systemd/system/[email protected]/TTYVTDisallocate-BLOCK.conf
[Service]
TTYVTDisallocate=no
However this will affect all VTs generated from the template. Does anybody know if it is bad to have TTYVTDisallocate set to false for tty{2,3,...}?
EDIT: Or are the other VTs generated from something else? It makes no sense to me they'd be generated from the template in /usr/lib/systemd/system since surely TTYVTDisallocate is inappropriate for the other ttys? Doesn't disallocating it make it unavailable for login etc.? Or have I misunderstood?
3. Increased scrollback for console by adding fbcon=scrollback:300k to /boot/syslinux/syslinux.cfg.
https://wiki.archlinux.org/index.php/Scrollback_buffer
Did you also append xxxfb as the wiki says? If so, what did you use? I'm confused because it mentions the name of your video driver but I'm not sure what that is since this is not concerned with X.
Last edited by cfr (2013-08-12 23:35:57)

Similar Messages

  • Stop the boot screen clearing

    So, I switch on my desktop and watch the daemon name fly up the screen.  Then I notice that some of them are failing with a nice error message to help me.  Problem is they go so fast, and then the screen gets cleared for the login prompt, that I have no idea what they say.  There is nothing in any of the logs.  So, is there a way to stop the screen from clearing before giving the login prompt?
    Cheers

    Another option is to comment out the line
    c1:2345:respawn:/sbin/agetty 38400 vc/1 linux
    in /etc/inittab -- this will prevent the first virtual console from displaying a login prompt. If you don't run runlevel 5, you'll need to hit alt-ctrl-F2 to login.

  • [Solved] MSI 965P boot message ODD0:HL-DT-ST DVDRAM GSA-4167B

    My dear friends,
    I have just bought MSI 965P Neo-f and at every boot I get a message “ODD0:HL-DT-ST DVDRAM GSA-4167B. I’m absolutely sure that I have the right settings for the IDE-Cable and the Jumper setting on the DVD/RW is set to master (also I have tried the other two settings for SL and CS).
    Therefore the DVD/RW couldn’t be recognized in the BIOS , my DVD/RW works only in PIO mode(no way to force it in DMA) and I have conflicts and a really awful performance with my Windows XP SP2 ???.
    Please help if someone already solved this problem.

    I actually had a bad installation of the jmicron driver in Windows  . I have also connected my HDD on the jmicron SATA  controller ,and SiSoft Sandra reported that it’s working in UDMA-6 mode,just cannot see if my DVD/RW drive works also in DMA mode. I have tried with Nero Info tool , but since all my drives are now connected on the SCSI controller, there is no such information. Any suggestions?....

  • [SOLVED] how to prevent Xorg from clearing boot messages in scrollback

    I have an updated Arch install with MATE and LightDM. LightDM autologin is enabled, so I normally boot directly to my desktop. I like seeing the messages that flash by during boot, so I deleted the word "quiet" from the linux line in my grub.cfg. Because I want all the messages to still be there after flashing by (in case I want to scroll through them later), I followed the advice here https://wiki.archlinux.org/index.php/Di … t_messages and I also increased the scrollback buffer and enabled early KMS start.
    Despite all the above, I can only scroll back to the beginning of the boot messages if I boot into non-graphical mode (e.g., by adding "systemd.unit=multi-user.target" to GRUB command line). If I allow a normal boot to my destkop and THEN go to non-graphical mode with "sudo systemctl isolate multi-user.target" to look at the boot messages, I notice that I cannot scroll back very far at all--most of the messages that flashed by during boot are gone. Therefore, it seems to me that either lightDM or Xorg is resetting the scrollback buffer and erasing all but the last few boot messages.
    So, how do I tell LightDM or Xorg (whichever one is the culprit) *not* to clear the scrollback buffer, so that when I get out of graphical mode and into non-graphical mode the boot messages are all still there?
    Last edited by bdantas (2014-08-01 14:19:06)

    Since the answer to my original question seems to be "it is not possible," I will make this my last post to prevent the thread from going off-topic.
    I came up with a simple workaround that (almost) recreates the old /var/boot/log:
    1) put "quiet" on grub2's kernel command line so that only* [FAIL] messages show up, so that I don't have to deal with the scrollback buffer
    2) create a startup script with the following contents (script or at least the setterm command must run as root because the setterm command needs to be able to read from /dev/vcs1):
    #!/bin/bash
    # this script will dump the text of tty1 to /var/log/boot, with same formatting as on the screen
    export TERM=xterm
    setterm -dump 1 -file /var/log/boot
    exit 0
    * Unfortunately, even in quiet mode grub2 starts printing all the boot status messages to screen once it encounters a [FAIL]. Therefore, if the [FAIL] occurs early enough in the boot process, the beginning of the messages will scroll off the screen and the workaround won't work. I spun off my two questions related to this nuisance into their own threads:
    a) How to make grub2 actually only print [FAIL] messages during boot? https://bbs.archlinux.org/viewtopic.php?id=184702
    b) How to print the contents of console's scrollback buffer to a file? https://bbs.archlinux.org/viewtopic.php … 9#p1439359
    I hope I can figure out how to do one of the above, because then the workaround would be perfect.
    Thanks for the help, guys!
    Last edited by bdantas (2014-08-15 02:16:38)

  • [Solved] [Xorg+KMS+Intel] Can't see login console / boot messages!

    Hi,
    My problem is that using an Intel video card (with KMS) after latest Xorg 1.8 update, I can't see boot messagges and the login console anymore.
    I've just noticed that after last Xorg update I can't access anymore to runlevel 3 on boot.
    I've got an Intel video card so KMS is enabled by default (and mandatory).
    I always used SLiM as a display manager, configured through /etc/inittab to go to runlevel 5 on boot:
    # /etc/inittab
    # Runlevels:
    # 0 Halt
    # 1(S) Single-user
    # 2 Not used
    # 3 Multi-user
    # 4 Not used
    # 5 X11
    # 6 Reboot
    ## Only one of the following two lines can be uncommented!
    # Boot to console
    #id:3:initdefault:
    # Boot to X11
    id:5:initdefault:
    rc::sysinit:/etc/rc.sysinit
    rs:S1:wait:/etc/rc.single
    rm:2345:wait:/etc/rc.multi
    rh:06:wait:/etc/rc.shutdown
    su:S:wait:/sbin/sulogin -p
    # -8 options fixes umlauts problem on login
    c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
    c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
    c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
    c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
    c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
    c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
    # Hypervisor Virtual Console for Xen and KVM
    #h0:2345:respawn:/sbin/agetty -8 38400 hvc0 linux
    ca::ctrlaltdel:/sbin/shutdown -t3 -r now
    # Example lines for starting a login manager
    #x:5:respawn:/usr/bin/xdm -nodaemon
    #x:5:respawn:/usr/sbin/gdm -nodaemon
    #x:5:respawn:/usr/bin/kdm -nodaemon
    x:5:respawn:/usr/bin/slim >& /dev/null
    To enable runlevel 3 at boot,  I commented the id:5:initdefault: and the x:5:respawn:/usr/bin/slim >& /dev/null lines and uncommented id:3:initdefault:.
    Now, during boot, the last thing I see is Loading UDev modules..., then the screen becomes dark gray and I can't see any other boot messages (actually this appened also before, after xorg update).
    The problem is that before slim started but now I can't see any login console.
    I also figured out that typing my username, password and then startx, starts X normally, so the problem is just that I can't see the tty console anymore.
    Once I am in X I can switch to ttys normally.
    What can I do?
    I just wanted to get rid of slim and start X automatically after console login but I can't see the console login!
    I hope to have been clear enough, thanks for your help!
    Last edited by rent0n (2010-07-04 11:36:38)

    rent0n wrote:
    Well, it seems I spoke too early. It doesn't work as expected at every startup, sometimes I still have the black screen.
    Now I'm trying with:
    video=SVIDEO-1:d
    that seems to work, but I just tested it one time and I'm starting to think that screen blanking happens randomly...
    Any hint is more than welcomed.
    After a few reboots, I can confirm this workaround seems to work.
    This is weird indeed as I don't have any SVIDEO-1 interface listed by xrandr -q, but still.
    Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
    VGA1 disconnected (normal left inverted right x axis y axis)
    LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
    1280x800 60.0*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    TV1 disconnected (normal left inverted right x axis y axis)
    The only problem is that now boot lasts a lot of time  and, between UDev modules loading and disks checking, I have to wait for at least 30 seconds with a black screen and a central white dash flashing.
    Anyone experiencing the same thing?

  • [solved] Large number of services enabled during first boot

    I just set up Arch Linux on a VM and was surprised to see a large number of services enabled in systemd during the first boot, including ftpd! I have set up several Arch Linux installations before, and have never encountered this before.
    To be sure, I installed a second time. While still booted in the install ISO, I checked and verified that only a few services were enabled. After the first boot into the system, sure enough, a large number of services were enabled.
    Any ideas as to what might be causing this?
    Edit #1: found the following in journalctl. It looks like a bunch of packages are missing systemd preset files, and services that are missing preset files are enabled by default.
    Edit #2: filed a bug report: https://bugs.archlinux.org/task/41711
    Edit #3: until this is fixed, a workaround is to get systemd-214-2 from ARM and downgrade to that before your first boot into the new installation. After you've booted, you should be able to upgrade back to the current systemd and have everything work out.
    Edit #4: Fixed in systemd-216-3. If you installed and rebooted prior to 216-3 hitting [core], see here for a proper fix.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about iptables.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd-root-fs.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable systemd-networkd-wait-online.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about busnames.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-remount-fs.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about krb5-kpropd.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about nscd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-tmpfiles-setup-dev.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-readahead-done.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about rsyncd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about rlogin.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-udev-trigger.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sys-kernel-config.mount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable systemd-journal-gatewayd.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about gpm.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about paths.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journal-remote.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about system-update.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-ask-password-wall.path, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about quotaon.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-tmpfiles-setup.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about final.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-initctl.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about talk.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-modules-load.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-udevd-kernel.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about proc-sys-fs-binfmt_misc.mount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about nss-lookup.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about local-fs.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd-switch-root.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about dev-mqueue.mount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about krb5-kpropd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd-parse-etc.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-reboot.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about updatedb.timer, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about org.freedesktop.resolve1.busname, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about krb5-kadmind.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-update-utmp.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about ftpd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about krb5-kdc.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journald.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about graphical.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sshd.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-sysusers.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sys-kernel-debug.mount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-vconsole-setup.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about ldconfig.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable console-shell.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-ask-password-console.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about machine.slice, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journal-flush.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about rescue.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about org.freedesktop.timedate1.busname, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about proc-sys-fs-binfmt_misc.automount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-firstboot.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journal-catalog-update.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sockets.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-hybrid-sleep.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-initctl.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about cryptsetup-pre.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-resolved.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-hibernate.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-ask-password-wall.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-logind.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sys-fs-fuse-connections.mount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-update-done.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about emergency.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about slices.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about iptables.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about logrotate.timer, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-quotacheck.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about tmp.mount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about dm-event.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-readahead-done.timer.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable console-getty.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-localed.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about printer.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-tmpfiles-clean.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journald.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-shutdownd.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about uuidd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about org.freedesktop.locale1.busname, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about rsh.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-timesyncd.service.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable kexec.target.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-readahead-collect.service.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-readahead-drop.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about suspend.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about mkinitcpio-generate-shutdown-ramfs.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable [email protected].
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-update-utmp-runlevel.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about cryptsetup.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd-fs.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about smartcard.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about dbus.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-ask-password-console.path, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-random-seed.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about uuidd.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about basic.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about remote-fs-pre.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about dhcpcd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about logrotate.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sshdgenkeys.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-fsck-root.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about fstrim.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-suspend.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about swap.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about org.freedesktop.login1.busname, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-readahead-replay.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journald-dev-log.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about timers.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable rescue.target.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about user.slice, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-sysctl.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about fstrim.timer, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sysinit.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about hybrid-sleep.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about dev-hugepages.mount, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-udev-hwdb-update.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journal-upload.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-shutdownd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about emergency.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-user-sessions.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sound.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable poweroff.target.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about dbus.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable systemd-journal-gatewayd.socket.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about talk.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable remote-fs.target.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about shadow.timer, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about system.slice, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about bluetooth.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable syslog.socket.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about getty.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-kexec.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable halt.target.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about -.slice, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about network-online.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sleep.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about dm-event.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-tmpfiles-clean.timer, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about kmod-static-nodes.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about multi-user.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about org.freedesktop.machine1.busname, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about hibernate.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says enable systemd-networkd.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about nss-user-lookup.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-halt.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about umount.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about network.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-timedated.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-udevd-control.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about ip6tables.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sshd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about time-sync.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about updatedb.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about sigpwr.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-poweroff.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd-udevadm-cleanup-db.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about rpcbind.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about shadow.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about network-pre.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd-switch-root.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable debug-shell.service.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-hostnamed.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about [email protected], enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about telnet.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file says disable reboot.target.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about org.freedesktop.hostname1.busname, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about rsyncd.socket, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-machined.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about local-fs-pre.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-journal-remote.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-udev-settle.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-binfmt.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about systemd-udevd.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about shutdown.target, enabling.
    Aug 27 02:53:41 host systemd[1]: Preset file doesn't say anything about initrd-cleanup.service, enabling.
    Aug 27 02:53:41 host systemd[1]: Populated /etc with preset unit settings.
    Things enabled before first boot (based on contents of /etc/system/systemd/*.wants):
    getty.target.wants:
    * [email protected]
    multi-user.target.wants:
    * [email protected]
    * iptables.service
    * remote-fs.target
    * sshd.service
    sysinit.target.wants:
    (none)
    Stuff additionally enabled and started during first boot (also based on /etc/system/systemd/*.wants):
    default.target.wants:
    * systemd-readahead-collect.service
    * systemd-readahead-replay.service
    multi-user.target.wants:
    * dhcpcd.service * krb5-kpropd.service
    * fstrim.service * nscd.service
    * ftpd.service * rsyncd.service
    * gpm.service * systemd-journal-upload.service
    * ip6tables.service * systemd-networkd.service
    * krb5-kadmind.service * systemd-resolved.service
    * krb5-kdc.service
    sockets.target.wants:
    * krb5-kpropd.socket * systemd-journal-remote.socket
    * rlogin.socket * talk.socket
    * rsh.socket * telnet.socket
    * rsyncd.socket * uuidd.socket
    * sshd.socket
    sysinit.target.wants:
    * dm-event.service
    * systemd-timesyncd.service
    system-update.target.wants:
    * systemd-readahead-drop.service
    Explicitly installed packages:
    dhcpcd iputils procps-ng systemd-sysvcompat
    diffutils linux-grsec psmisc tar
    dnsutils logrotate reflector vim-systemd
    file mlocate rsync wget
    gradm mtr s-nail which
    grub openssh screen whois
    inetutils pacman
    Last edited by tazmanian (2014-09-10 23:11:42)

    +1.
    Here is the ports these services are listening:
    $ ss -tpl
    State      Recv-Q Send-Q                                                                                                       Local Address:Port                                                                                                           Peer Address:Port   
    LISTEN     0      128                                                                                                                      *:llmnr                                                                                                                     *:*       
    LISTEN     0      128                                                                                                                      *:ssh                                                                                                                       *:*       
    LISTEN     0      128                                                                                                                     :::llmnr                                                                                                                    :::*       
    LISTEN     0      128                                                                                                                     :::19532                                                                                                                    :::*       
    LISTEN     0      128                                                                                                                     :::tell                                                                                                                     :::*       
    LISTEN     0      128                                                                                                                     :::ssh                                                                                                                      :::*       
    LISTEN     0      128                                                                                                                     :::telnet                                                                                                                   :::*       
    LISTEN     0      128                                                                                                                     :::login                                                                                                                    :::*       
    LISTEN     0      128                                                                                                                     :::shell                                                                                                                    :::*       
    LISTEN     0      128                                                                                                                     :::rsync                                                                                                                    :::*       
    LISTEN     0      128                                                                                                                     :::git                                                                                                                      :::*

  • Wont boot unless clearing cmos

    JBAT1
    Ok here's the story in full.
    Received K8T Neo2-FIR - was completely DOA along with a working 3000 90nm.
    Received working K8T Neo2-FIR, got system to post after 5 hours of work (including 1.30 hours to watch Open Range whilst angered).
    Post Showed 'invalid bios checksum' etc, the board now has 3.31 bios and still it will not post, will not even boot to be precise. It won't kick in fans etc UNLESS the jbat1 is set to CLEAR CMOS. Then the system works fine other than not retaining any bios settings.
    I have now installed Windows XP Pro 64bit along with the 64bit drivers, unfortunately cannot use any MSI tools. I am going to update to the latest RC1 of XP64 pro as soon as Microsoft sort out the error in the download page/server.
    Anybody got any clue to solving my problem? Oh and i can't run my Kingmax 3700 in dual channel, infact i dont think i can run 2 sticks in single channel either. (2x512MB).

    550Watt PSU
    22A at 12v rail
    3000+ Winchester
    MSI K8T Neo2-FIR
    2x IDE HDD on IDE1
    1x DVDWRITER on IDE2
    9700Pro
    1GB Dual Channel 3700
    The PSU is going to be my next purchase, i have witnessed 2 Tagan UO2's explode recently so am going to go with an Akasa 460W. To be honest the current PSU is crap quality but testing the rails and amperes output actually hits 530Watts, on load i doubt it can hit this but still has enough power to satisfty 3xmore drivers and 6case fans in another SocketA machine which takes a lot more power at the cpu.
    The ram has been in all possible combinations provided by the book but i can only get it to run 1 stick. I cannot run the LIVE UPDATE tool as im using Windows 64Bit. I've got 1 hour 26mins left on the download for the latest beta so hopefully i can run the tools tomorrow.
    I have tried booting the machine etc with all items unpluged and select ones etc but no luck, it will only work if the jumpers are set to clear cmos. Maybe a multimeter on the jbat would reveal whether any current is getting passed through pin 1. Long shot and hopeless i know. Theres probably a reasonabe explanation.
    I've now had 3 different Bios errors on post, so i think its just screwed it with the first boot on jumper2-3.
    Soft reboots work fine (it hasnt stopped to tell me bios errors) just 'NO BIOS INSTALLED' at the sata raid post screen.

  • C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

    C3180 Photosmart All-in-one won't print. Gives message  'clear paper jam.'  There is no paper jam.  About a month ago there was a paper jam, but was removed.  It worked fine since then until yesterday.  I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem.  The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam."  When the problem first started yesterday the message was that the printer was "Out of paper."  I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out.  Thanks for any suggestions!

    Hi there pattimessick,
    You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Sound deactivated when first boot-up

    Hi,
    Whenever i first boot-up mu iMac, the speaker or sound is deactivated. i need to restart it to make it appear and function normally.
    Pls. help!
    thanks

    The constant shut down and restart cycle stopped when I cleared cmos. The two problems that I now have are no display and the d-led indicating a mem problem. Could the mem problem cause lack of display or could it be a mobo problem that causes the d-led to report incorrectly? (is this question like asking how long is a bit of string?) The reason that I am suspicious of the mobo is that I suspect it is a repaired one not new, the date on the box is Dec 06 (from a leading UK supplies it seems a bit old to me but!) and both board and box have two serial numbers. (plus the cmos bit) I am hesitant about sending back immediately in case it is something else faulty and I have to return that as well, but maybe I'm being a bit over concerned.
    Both drives seem to run and the DVD rw front led flashes but I cannot tell any more because of the lack of display.  I will try powering up with only on mem stick when I get back from work. (BTW mem sticks are in 1&3).
    Phil...

  • [SOLVED] systemd: no kernel messages in the journal

    Hi
    Currently the journal holds only application logs; I do not see any kernel logs in the journal. This is an old Arch system that was using syslog-ng but was transitioned to systemd when Arch made systemd default. This was working well until about three weeks back, when journal stopped holding kernel messages. The journal was causing journalctl to crash and I couldn't verify the journal since I had FSS setup but forgotten the keys. So, I had disabled the FSS, cleared the journals to startover again. Only to see kernel messages are not getting logged.
    I would be grrateful for any help in resolving the issue. Thank you!
    Last edited by chaembian (2013-11-20 02:53:00)

    OK, I removed the commandline options, regenerated grub config, rebooted.
    journalctl --dmesg starts:
    -- Logs begin at Sun 2013-11-17 23:26:51 IST, end at Sun 2013-11-17 23:35:38 IST. --
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    Nov 17 23:26:51 chaembian kernel: snd_hda_intel 0000:01:05.1: setting latency timer to 64
    Nov 17 23:26:51 chaembian kernel: input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input11
    Nov 17 23:26:51 chaembian kernel: microcode: CPU0: new patch_level=0x010000c8
    Nov 17 23:26:51 chaembian kernel: microcode: CPU1: patch_level=0x010000b6
    Nov 17 23:26:51 chaembian kernel: microcode: CPU1: new patch_level=0x010000c8
    Nov 17 23:26:51 chaembian kernel: microcode: CPU2: patch_level=0x010000b6
    Nov 17 23:26:51 chaembian kernel: microcode: CPU2: new patch_level=0x010000c8
    Nov 17 23:26:51 chaembian kernel: microcode: CPU3: patch_level=0x010000b6
    Nov 17 23:26:51 chaembian kernel: microcode: CPU3: new patch_level=0x010000c8
    Nov 17 23:26:51 chaembian kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Nov 17 23:26:51 chaembian kernel: media: Linux media interface: v0.10
    Nov 17 23:26:51 chaembian kernel: Linux video capture interface: v2.00
    Nov 17 23:26:51 chaembian kernel: kvm: Nested Virtualization enabled
    Nov 17 23:26:51 chaembian kernel: kvm: Nested Paging enabled
    Nov 17 23:26:52 chaembian kernel: hidraw: raw HID events driver (C) Jiri Kosina
    That is indeed a step in the right direction.
    dmesg for cross-reference
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=639e14d4-e548-48ed-a6e5-c73a19c618ff rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cff98000-0x00000000cffcffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.5 present.
    [ 0.000000] DMI: System manufacturer System Product Name/M4A88TD-M EVO, BIOS 1702 12/10/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000130000000 aka 4864M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
    [ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
    [ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
    [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff7ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
    [ 0.000000] [mem 0xcfe00000-0xcff7ffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x37690000-0x37b3ffff]
    [ 0.000000] ACPI: RSDP 00000000000fb570 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 00000000cff80100 0005C (v01 121010 XSDT1437 20101210 MSFT 00000097)
    [ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 121010 FACP1437 20101210 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 00000000cff80450 0F2D6 (v01 A1581 A1581001 00000001 INTL 20060113)
    [ 0.000000] ACPI: FACS 00000000cff98000 00040
    [ 0.000000] ACPI: APIC 00000000cff80390 0007C (v01 121010 APIC1437 20101210 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 00000000cff80410 0003C (v01 121010 OEMMCFG 20101210 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 00000000cff98040 00072 (v01 121010 OEMB1437 20101210 MSFT 00000097)
    [ 0.000000] ACPI: SRAT 00000000cff8f8a0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
    [ 0.000000] ACPI: HPET 00000000cff8f990 00038 (v01 121010 OEMHPET 20101210 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000cff8f9d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
    [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
    [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
    [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
    [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x12fffffff]
    [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
    [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
    [ 0.000000] NODE_DATA [mem 0x11fff9000-0x11fffdfff]
    [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ba00000-ffff88011f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x11fffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00099fff]
    [ 0.000000] node 0: [mem 0x00100000-0xcff7ffff]
    [ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
    [ 0.000000] On node 0 totalpages: 982809
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3993 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13246 pages used for memmap
    [ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31
    [ 0.000000] Normal zone: 2048 pages used for memmap
    [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 6 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff97fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcff98000-0xcffcffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xff9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
    [ 0.000000] e820: [mem 0xd0000000-0xff9fffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:6 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fc00000 s86528 r8192 d24064 u262144
    [ 0.000000] pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 967430
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=639e14d4-e548-48ed-a6e5-c73a19c618ff rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
    [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
    [ 0.000000] Your BIOS doesn't leave a aperture memory hole
    [ 0.000000] Please enable the IOMMU option in the BIOS setup
    [ 0.000000] This costs you 64 MB of RAM
    [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
    [ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
    [ 0.000000] Memory: 3720876K/3931236K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 210360K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=6.
    [ 0.000000] NR_IRQS:8448 nr_irqs:728 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 15728640 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 3415.125 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6832.84 BogoMIPS (lpj=11383750)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000033] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000034] Yama: becoming mindful.
    [ 0.000231] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001248] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001717] Mount-cache hash table entries: 256
    [ 0.001875] Initializing cgroup subsys memory
    [ 0.001885] Initializing cgroup subsys devices
    [ 0.001887] Initializing cgroup subsys freezer
    [ 0.001888] Initializing cgroup subsys net_cls
    [ 0.001889] Initializing cgroup subsys blkio
    [ 0.001904] tseg: 0000000000
    [ 0.001910] CPU: Physical Processor ID: 0
    [ 0.001910] CPU: Processor Core ID: 0
    [ 0.001912] mce: CPU supports 6 MCE banks
    [ 0.001916] LVT offset 0 assigned for vector 0xf9
    [ 0.001919] process: using AMD E400 aware idle routine
    [ 0.001921] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
    tlb_flushall_shift: 4
    [ 0.001983] Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
    [ 0.002531] ACPI: Core revision 20130517
    [ 0.006010] ACPI: All ACPI Tables successfully acquired
    [ 0.109344] ftrace: allocating 20100 entries in 79 pages
    [ 0.116210] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.149233] smpboot: CPU0: AMD Phenom(tm) II X4 965 Processor (fam: 10, model: 04, stepping: 03)
    [ 0.253603] Performance Events: AMD PMU driver.
    [ 0.253606] ... version: 0
    [ 0.253607] ... bit width: 48
    [ 0.253608] ... generic registers: 4
    [ 0.253609] ... value mask: 0000ffffffffffff
    [ 0.253609] ... max period: 00007fffffffffff
    [ 0.253610] ... fixed-purpose events: 0
    [ 0.253611] ... event mask: 000000000000000f
    [ 0.253639] process: System has AMD C1E enabled
    [ 0.253645] process: Switch to broadcast mode on CPU0
    [ 0.270404] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.290256] process: Switch to broadcast mode on CPU1
    [ 0.306943] process: Switch to broadcast mode on CPU2
    [ 0.277079] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.323592] Brought up 4 CPUs
    [ 0.323595] smpboot: Total of 4 processors activated (27331.37 BogoMIPS)
    [ 0.323636] process: Switch to broadcast mode on CPU3
    [ 0.328034] devtmpfs: initialized
    [ 0.329347] PM: Registering ACPI NVS region [mem 0xcff98000-0xcffcffff] (229376 bytes)
    [ 0.330091] RTC time: 17:56:43, date: 11/17/13
    [ 0.330127] NET: Registered protocol family 16
    [ 0.330208] node 0 link 0: io port [1000, ffffff]
    [ 0.330210] TOM: 00000000d0000000 aka 3328M
    [ 0.330212] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
    [ 0.330213] node 0 link 0: mmio [a0000, bffff]
    [ 0.330215] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
    [ 0.330217] node 0 link 0: mmio [f0000000, fe6fffff]
    [ 0.330219] node 0 link 0: mmio [fe700000, fe8fffff]
    [ 0.330220] node 0 link 0: mmio [fe900000, ffdfffff]
    [ 0.330221] TOM2: 0000000130000000 aka 4864M
    [ 0.330222] bus: [bus 00-07] on node 0 link 0
    [ 0.330223] bus: 00 [io 0x0000-0xffff]
    [ 0.330224] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.330225] bus: 00 [mem 0xd0000000-0xdfffffff]
    [ 0.330226] bus: 00 [mem 0xf0000000-0xffffffff]
    [ 0.330227] bus: 00 [mem 0x130000000-0xfcffffffff]
    [ 0.330268] ACPI: bus type PCI registered
    [ 0.330269] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.330314] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.330316] PCI: not using MMCONFIG
    [ 0.330317] PCI: Using configuration type 1 for base access
    [ 0.330317] PCI: Using configuration type 1 for extended access
    [ 0.330790] bio: create slab <bio-0> at 0
    [ 0.330911] ACPI: Added _OSI(Module Device)
    [ 0.330913] ACPI: Added _OSI(Processor Device)
    [ 0.330914] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.330915] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.331704] ACPI: EC: Look up EC in DSDT
    [ 0.343813] ACPI: Executed 3 blocks of module-level executable AML code
    [ 0.657725] ACPI: Interpreter enabled
    [ 0.657735] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 0.657746] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.657748] ACPI: Using IOAPIC for interrupt routing
    [ 0.657763] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.658965] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.665871] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.665931] ACPI: No dock devices found.
    [ 0.670245] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.670357] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
    [ 0.670453] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
    [ 0.670632] PCI host bridge to bus 0000:00
    [ 0.670635] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.670636] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.670638] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.670639] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.670641] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
    [ 0.670642] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
    [ 0.670643] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.670652] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
    [ 0.670728] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
    [ 0.670791] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
    [ 0.670818] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.670846] pci 0000:00:05.0: System wakeup disabled by ACPI
    [ 0.670871] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
    [ 0.670897] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.670924] pci 0000:00:07.0: System wakeup disabled by ACPI
    [ 0.670947] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
    [ 0.670974] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    [ 0.671001] pci 0000:00:09.0: System wakeup disabled by ACPI
    [ 0.671023] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
    [ 0.671050] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.671077] pci 0000:00:0a.0: System wakeup disabled by ACPI
    [ 0.671108] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
    [ 0.671122] pci 0000:00:11.0: reg 0x10: [io 0x9000-0x9007]
    [ 0.671129] pci 0000:00:11.0: reg 0x14: [io 0x8000-0x8003]
    [ 0.671135] pci 0000:00:11.0: reg 0x18: [io 0x7000-0x7007]
    [ 0.671142] pci 0000:00:11.0: reg 0x1c: [io 0x6000-0x6003]
    [ 0.671149] pci 0000:00:11.0: reg 0x20: [io 0x5000-0x500f]
    [ 0.671156] pci 0000:00:11.0: reg 0x24: [mem 0xfe6ffc00-0xfe6fffff]
    [ 0.671231] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.671241] pci 0000:00:12.0: reg 0x10: [mem 0xfe6fe000-0xfe6fefff]
    [ 0.671303] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.671332] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.671346] pci 0000:00:12.2: reg 0x10: [mem 0xfe6ff800-0xfe6ff8ff]
    [ 0.671405] pci 0000:00:12.2: supports D1 D2
    [ 0.671406] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.671435] pci 0000:00:12.2: System wakeup disabled by ACPI
    [ 0.671464] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.671474] pci 0000:00:13.0: reg 0x10: [mem 0xfe6fd000-0xfe6fdfff]
    [ 0.671536] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.671563] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.671577] pci 0000:00:13.2: reg 0x10: [mem 0xfe6ff400-0xfe6ff4ff]
    [ 0.671635] pci 0000:00:13.2: supports D1 D2
    [ 0.671637] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.671665] pci 0000:00:13.2: System wakeup disabled by ACPI
    [ 0.671691] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.671780] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.671795] pci 0000:00:14.2: reg 0x10: [mem 0xfe6f4000-0xfe6f7fff 64bit]
    [ 0.671842] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.671870] pci 0000:00:14.2: System wakeup disabled by ACPI
    [ 0.671893] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.671979] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.672026] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.672049] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.672059] pci 0000:00:14.5: reg 0x10: [mem 0xfe6fc000-0xfe6fcfff]
    [ 0.672121] pci 0000:00:14.5: System wakeup disabled by ACPI
    [ 0.672146] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    [ 0.672156] pci 0000:00:16.0: reg 0x10: [mem 0xfe6f3000-0xfe6f3fff]
    [ 0.672218] pci 0000:00:16.0: System wakeup disabled by ACPI
    [ 0.672245] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    [ 0.672258] pci 0000:00:16.2: reg 0x10: [mem 0xfe6ff000-0xfe6ff0ff]
    [ 0.672317] pci 0000:00:16.2: supports D1 D2
    [ 0.672318] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.672347] pci 0000:00:16.2: System wakeup disabled by ACPI
    [ 0.672372] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
    [ 0.672416] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
    [ 0.672457] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
    [ 0.672499] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
    [ 0.672542] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
    [ 0.672618] pci 0000:01:05.0: [1002:9715] type 00 class 0x030000
    [ 0.672624] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.672628] pci 0000:01:05.0: reg 0x14: [io 0xa000-0xa0ff]
    [ 0.672632] pci 0000:01:05.0: reg 0x18: [mem 0xfe8f0000-0xfe8fffff]
    [ 0.672639] pci 0000:01:05.0: reg 0x24: [mem 0xfe700000-0xfe7fffff]
    [ 0.672654] pci 0000:01:05.0: supports D1 D2
    [ 0.672678] pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
    [ 0.672684] pci 0000:01:05.1: reg 0x10: [mem 0xfe8e8000-0xfe8ebfff]
    [ 0.672709] pci 0000:01:05.1: supports D1 D2
    [ 0.672750] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.672753] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
    [ 0.672755] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
    [ 0.672758] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.672796] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.672810] pci 0000:02:00.0: reg 0x10: [mem 0xfe9fe000-0xfe9fffff 64bit]
    [ 0.672875] pci 0000:02:00.0: PME# supported from D0 D3hot
    [ 0.680606] pci 0000:00:05.0: PCI bridge to [bus 02]
    [ 0.680611] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 0.680673] pci 0000:03:00.0: [1106:3403] type 00 class 0x0c0010
    [ 0.680702] pci 0000:03:00.0: reg 0x10: [mem 0xfeaff800-0xfeafffff 64bit]
    [ 0.680717] pci 0000:03:00.0: reg 0x18: [io 0xb800-0xb8ff]
    [ 0.680838] pci 0000:03:00.0: supports D2
    [ 0.680839] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
    [ 0.690631] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.690635] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
    [ 0.690637] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.690704] pci 0000:04:00.0: [1106:0415] type 00 class 0x010185
    [ 0.690726] pci 0000:04:00.0: reg 0x10: [io 0xcc00-0xcc07]
    [ 0.690740] pci 0000:04:00.0: reg 0x14: [io 0xc880-0xc883]
    [ 0.690755] pci 0000:04:00.0: reg 0x18: [io 0xc800-0xc807]
    [ 0.690769] pci 0000:04:00.0: reg 0x1c: [io 0xc480-0xc483]
    [ 0.690783] pci 0000:04:00.0: reg 0x20: [io 0xc400-0xc40f]
    [ 0.690811] pci 0000:04:00.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
    [ 0.690883] pci 0000:04:00.0: supports D1 D2
    [ 0.690885] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
    [ 0.700620] pci 0000:00:09.0: PCI bridge to [bus 04]
    [ 0.700625] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
    [ 0.700627] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.700675] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.700687] pci 0000:05:00.0: reg 0x10: [io 0xd800-0xd8ff]
    [ 0.700705] pci 0000:05:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
    [ 0.700717] pci 0000:05:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
    [ 0.700768] pci 0000:05:00.0: supports D1 D2
    [ 0.700769] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.710623] pci 0000:00:0a.0: PCI bridge to [bus 05]
    [ 0.710627] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.710631] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.710674] pci 0000:06:05.0: [1412:1724] type 00 class 0x040100
    [ 0.710691] pci 0000:06:05.0: reg 0x10: [io 0xec00-0xec1f]
    [ 0.710701] pci 0000:06:05.0: reg 0x14: [io 0xe880-0xe8ff]
    [ 0.710769] pci 0000:06:05.0: supports D2
    [ 0.710824] pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
    [ 0.710827] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
    [ 0.710832] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.710833] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.710835] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.710836] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.710837] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
    [ 0.710839] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.711399] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
    [ 0.711445] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 14 15)
    [ 0.711491] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 14 15)
    [ 0.711536] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 9 10 *11 14 15)
    [ 0.711572] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
    [ 0.711602] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
    [ 0.711631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
    [ 0.711661] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
    [ 0.711760] ACPI: Enabled 1 GPEs in block 00 to 1F
    [ 0.711764] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.711791] Found 1 acpi root devices
    [ 0.711811] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.711884] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.711885] vgaarb: loaded
    [ 0.711886] vgaarb: bridge control possible 0000:01:05.0
    [ 0.711914] PCI: Using ACPI for IRQ routing
    [ 0.717926] PCI: pci_cache_line_size set to 64 bytes
    [ 0.717976] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
    [ 0.717978] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
    [ 0.718041] NetLabel: Initializing
    [ 0.718042] NetLabel: domain hash size = 128
    [ 0.718042] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.718052] NetLabel: unlabeled traffic allowed by default
    [ 0.718064] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.718066] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.720112] Switched to clocksource hpet
    [ 0.723318] pnp: PnP ACPI init
    [ 0.723328] ACPI: bus type PNP registered
    [ 0.723421] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.723488] pnp 00:01: [dma 4]
    [ 0.723503] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.723526] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.723543] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.723560] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.723934] pnp 00:05: [dma 0 disabled]
    [ 0.724064] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.724097] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.724374] pnp 00:07: [dma 0 disabled]
    [ 0.724425] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.724491] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.724493] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.724495] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.724649] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.724651] system 00:09: [io 0x040b] has been reserved
    [ 0.724653] system 00:09: [io 0x04d6] has been reserved
    [ 0.724654] system 00:09: [io 0x0c00-0x0c01] has been reserved
    [ 0.724656] system 00:09: [io 0x0c14] has been reserved
    [ 0.724657] system 00:09: [io 0x0c50-0x0c51] has been reserved
    [ 0.724659] system 00:09: [io 0x0c52] has been reserved
    [ 0.724660] system 00:09: [io 0x0c6c] has been reserved
    [ 0.724661] system 00:09: [io 0x0c6f] has been reserved
    [ 0.724663] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.724664] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.724666] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.724667] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.724669] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.724670] system 00:09: [io 0x0b00-0x0b3f] has been reserved
    [ 0.724672] system 00:09: [io 0x0800-0x089f] could not be reserved
    [ 0.724673] system 00:09: [io 0x0b00-0x0b1f] has been reserved
    [ 0.724675] system 00:09: [io 0x0b20-0x0b3f] has been reserved
    [ 0.724677] system 00:09: [io 0x0900-0x090f] has been reserved
    [ 0.724678] system 00:09: [io 0x0910-0x091f] has been reserved
    [ 0.724680] system 00:09: [io 0xfe00-0xfefe] has been reserved
    [ 0.724682] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
    [ 0.724683] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
    [ 0.724685] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.724686] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
    [ 0.724688] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.724807] system 00:0a: [io 0x0230-0x023f] has been reserved
    [ 0.724809] system 00:0a: [io 0x0290-0x029f] has been reserved
    [ 0.724810] system 00:0a: [io 0x0300-0x030f] has been reserved
    [ 0.724812] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
    [ 0.724814] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.724858] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.724860] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.724952] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.724953] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.724955] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.724957] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
    [ 0.724958] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
    [ 0.724960] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.725022] pnp: PnP ACPI: found 13 devices
    [ 0.725022] ACPI: bus type PNP unregistered
    [ 0.731469] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.731472] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
    [ 0.731474] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff]
    [ 0.731476] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.731479] pci 0000:00:05.0: PCI bridge to [bus 02]
    [ 0.731481] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 0.731484] pci 0000:00:07.0: PCI bridge to [bus 03]
    [ 0.731486] pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
    [ 0.731488] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.731491] pci 0000:00:09.0: PCI bridge to [bus 04]
    [ 0.731493] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
    [ 0.731495] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.731498] pci 0000:00:0a.0: PCI bridge to [bus 05]
    [ 0.731499] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
    [ 0.731502] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.731505] pci 0000:00:14.4: PCI bridge to [bus 06]
    [ 0.731507] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
    [ 0.731716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.731718] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.731719] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.731721] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.731722] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.731723] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.731725] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
    [ 0.731726] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
    [ 0.731727] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.731729] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
    [ 0.731730] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 0.731732] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.731733] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    [ 0.731734] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.731736] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
    [ 0.731737] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
    [ 0.731739] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
    [ 0.731740] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
    [ 0.731741] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
    [ 0.731742] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.731744] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.731745] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xdfffffff]
    [ 0.731746] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.731774] NET: Registered protocol family 2
    [ 0.731920] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.732050] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.732170] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.732202] TCP: reno registered
    [ 0.732208] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.732229] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.732295] NET: Registered protocol family 1
    [ 0.732302] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    [ 1.774244] pci 0000:01:05.0: Boot video device
    [ 1.774293] PCI: CLS 64 bytes, default 64
    [ 1.774329] Unpacking initramfs...
    [ 1.838503] Freeing initrd memory: 4800K (ffff880037690000 - ffff880037b40000)
    [ 1.839314] PCI-DMA: Disabling AGP.
    [ 1.839384] PCI-DMA: aperture base @ c4000000 size 65536 KB
    [ 1.839385] PCI-DMA: using GART IOMMU.
    [ 1.839387] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
    [ 1.842458] LVT offset 1 assigned for vector 0x400
    [ 1.842466] IBS: LVT offset 1 assigned
    [ 1.842487] perf: AMD IBS detected (0x0000001f)
    [ 1.842507] Scanning for low memory corruption every 60 seconds
    [ 1.842725] audit: initializing netlink socket (disabled)
    [ 1.842734] type=2000 audit(1384711004.543:1): initialized
    [ 1.851049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.852054] zbud: loaded
    [ 1.852166] VFS: Disk quotas dquot_6.5.2
    [ 1.852200] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.852354] msgmni has been set to 7405
    [ 1.852587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.852634] io scheduler noop registered
    [ 1.852637] io scheduler deadline registered
    [ 1.852674] io scheduler cfq registered (default)
    [ 1.852784] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
    [ 1.852849] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
    [ 1.852906] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
    [ 1.852964] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
    [ 1.853049] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
    [ 1.853053] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 1.853055] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
    [ 1.853064] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
    [ 1.853066] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 1.853068] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
    [ 1.853078] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
    [ 1.853079] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 1.853081] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
    [ 1.853092] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
    [ 1.853093] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
    [ 1.853095] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
    [ 1.853105] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.853116] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.853160] vesafb: mode is 1920x1440x32, linelength=7680, pages=0
    [ 1.853161] vesafb: scrolling: redraw
    [ 1.853162] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 1.853503] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010800000, using 10816k, total 10816k
    [ 2.187925] Console: switching to colour frame buffer device 240x90
    [ 2.522112] fb0: VESA VGA frame buffer device
    [ 2.522136] GHES: HEST is not enabled!
    [ 2.522194] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 2.542718] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 2.543025] Linux agpgart interface v0.103
    [ 2.543063] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 2.543414] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 2.543440] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 2.543545] mousedev: PS/2 mouse device common for all mice
    [ 2.543591] rtc_cmos 00:02: RTC can wake from S4
    [ 2.543688] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 2.543707] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 2.543713] cpuidle: using governor ladder
    [ 2.543715] cpuidle: using governor menu
    [ 2.543764] drop_monitor: Initializing network drop monitor service
    [ 2.543811] TCP: cubic registered
    [ 2.543876] NET: Registered protocol family 10
    [ 2.544001] NET: Registered protocol family 17
    [ 2.544009] Key type dns_resolver registered
    [ 2.544240] PM: Hibernation image not present or could not be loaded.
    [ 2.544247] registered taskstats version 1
    [ 2.544768] Magic number: 5:4:947
    [ 2.544782] tty tty4: hash matches
    [ 2.544801] cpu cpu2: hash matches
    [ 2.544807] memory memory0: hash matches
    [ 2.544836] rtc_cmos 00:02: setting system clock to 2013-11-17 17:56:45 UTC (1384711005)
    [ 2.545743] Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
    [ 2.545745] Write protecting the kernel read-only data: 8192k
    [ 2.547931] Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
    [ 2.548636] Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
    [ 2.554741] systemd-udevd[57]: starting version 208
    [ 2.556092] SCSI subsystem initialized
    [ 2.556877] ACPI: bus type ATA registered
    [ 2.556944] libata version 3.00 loaded.
    [ 2.557360] ahci 0000:00:11.0: version 3.0
    [ 2.557535] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 2.557538] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 2.558505] scsi0 : ahci
    [ 2.558599] scsi1 : ahci
    [ 2.558778] scsi2 : ahci
    [ 2.558868] scsi3 : ahci
    [ 2.559022] scsi4 : ahci
    [ 2.559089] scsi5 : ahci
    [ 2.559150] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 19
    [ 2.559153] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 19
    [ 2.559155] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 19
    [ 2.559156] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 19
    [ 2.559159] ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 19
    [ 2.559161] ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 19
    [ 2.560807] [drm] Initialized drm 1.1.0 20060810
    [ 2.564745] [drm] radeon kernel modesetting enabled.
    [ 2.564805] checking generic (d0000000 a90000) vs hw (d0000000 10000000)
    [ 2.564808] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
    [ 2.564821] Console: switching to colour dummy device 80x25
    [ 2.565086] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E).
    [ 2.565095] [drm] register mmio base: 0xFE8F0000
    [ 2.565096] [drm] register mmio size: 65536
    [ 2.565630] ATOM BIOS: 113
    [ 2.565643] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
    [ 2.565645] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
    [ 2.565648] [drm] Detected VRAM RAM=368M, BAR=256M
    [ 2.565649] [drm] RAM width 32bits DDR
    [ 2.565696] [TTM] Zone kernel: Available graphics memory: 1897112 kiB
    [ 2.565697] [TTM] Initializing pool allocator
    [ 2.565700] [TTM] Initializing DMA pool allocator
    [ 2.565716] [drm] radeon: 368M of VRAM memory ready
    [ 2.565717] [drm] radeon: 512M of GTT memory ready.
    [ 2.565725] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 2.576556] [drm] Loading RS780 Microcode
    [ 2.578778] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
    [ 2.578836] radeon 0000:01:05.0: WB enabled
    [ 2.578838] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880117cfdc00
    [ 2.578839] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880117cfdc0c
    [ 2.578841] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.578842] [drm] Driver supports precise vblank timestamp query.
    [ 2.578860] [drm] radeon: irq initialized.
    [ 2.579084] radeon 0000:01:05.0: setting latency timer to 64
    [ 2.611015] [drm] ring test on 0 succeeded in 1 usecs
    [ 2.611072] [drm] ring test on 3 succeeded in 1 usecs
    [ 2.611137] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 2.611149] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 2.611351] [drm] Radeon Display Connectors
    [ 2.611352] [drm] Connector 0:
    [ 2.611353] [drm] VGA-1
    [ 2.611355] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [ 2.611355] [drm] Encoders:
    [ 2.611356] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 2.611357] [drm] Connector 1:
    [ 2.611357] [drm] DVI-D-1
    [ 2.611358] [drm] HPD1
    [ 2.611359] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [ 2.611360] [drm] Encoders:
    [ 2.611361] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
    [ 2.611408] [drm] radeon: power management initialized
    [ 2.652806] [drm] fb mappable at 0xD0142000
    [ 2.652807] [drm] vram apper at 0xD0000000
    [ 2.652808] [drm] size 5242880
    [ 2.652808] [drm] fb depth is 24
    [ 2.652809] [drm] pitch is 5120
    [ 2.652866] fbcon: radeondrmfb (fb0) is primary device
    [ 2.664744] Console: switching to colour frame buffer device 160x64
    [ 2.675575] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
    [ 2.675577] radeon 0000:01:05.0: registered panic notifier
    [ 2.675630] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:05.0 on minor 0
    [ 2.692173] pata_via 0000:04:00.0: version 0.3.4
    [ 2.693001] scsi6 : pata_via
    [ 2.693202] scsi7 : pata_via
    [ 2.693237] ata7: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17
    [ 2.693238] ata8: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17
    [ 2.693302] ACPI: bus type USB registered
    [ 2.693369] usbcore: registered new interface driver usbfs
    [ 2.693378] usbcore: registered new interface driver hub
    [ 2.693419] usbcore: registered new device driver usb
    [ 2.694028] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 2.694034] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
    [ 2.694163] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 2.694168] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 2.694173] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
    [ 2.694177] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 2.694181] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
    [ 2.694382] xHCI xhci_add_endpoint called for root hub
    [ 2.694383] xHCI xhci_check_bandwidth called for root hub
    [ 2.694913] hub 1-0:1.0: USB hub found
    [ 2.694918] hub 1-0:1.0: 2 ports detected
    [ 2.695055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.695347] ehci-pci: EHCI PCI platform driver
    [ 2.695437] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 2.695532] ohci-pci: OHCI PCI platform driver
    [ 2.695613] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 2.695617] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
    [ 2.697530] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 2.697595] xHCI xhci_add_endpoint called for root hub
    [ 2.697596] xHCI xhci_check_bandwidth called for root hub
    [ 2.697636] hub 2-0:1.0: USB hub found
    [ 2.697645] hub 2-0:1.0: 2 ports detected
    [ 2.697762] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
    [ 2.697764] QUIRK: Enable AMD PLL fix
    [ 2.697766] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.697776] ehci-pci 0000:00:12.2: debug port 1
    [ 2.697800] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe6ff800
    [ 2.704582] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 2.704674] hub 3-0:1.0: USB hub found
    [ 2.704677] hub 3-0:1.0: 5 ports detected
    [ 2.704845] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 2.704850] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 2.704852] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.704861] ehci-pci 0000:00:13.2: debug port 1
    [ 2.704883] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe6ff400
    [ 2.714637] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 2.714734] hub 4-0:1.0: USB hub found
    [ 2.714737] hub 4-0:1.0: 5 ports detected
    [ 2.714896] ehci-pci 0000:00:16.2: EHCI Host Controller
    [ 2.714900] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
    [ 2.714903] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 2.714911] ehci-pci 0000:00:16.2: debug port 1
    [ 2.714930] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe6ff000
    [ 2.724628] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 2.724725] hub 5-0:1.0: USB hub found
    [ 2.724728] hub 5-0:1.0: 4 ports detected
    [ 2.724888] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 2.724892] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
    [ 2.724904] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe6fe000
    [ 2.758021] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
    [ 2.782133] hub 6-0:1.0: USB hub found
    [ 2.782138] hub 6-0:1.0: 5 ports detected
    [ 2.782291] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 2.782296] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
    [ 2.782308] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe6fd000
    [ 2.838807] hub 7-0:1.0: USB hub found
    [ 2.838813] hub 7-0:1.0: 5 ports detected
    [ 2.838974] ohci-pci 0000:00:14.5: OHCI PCI host controller
    [ 2.838978] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
    [ 2.838989] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe6fc000
    [ 2.844705] tsc: Refined TSC clocksource calibration: 3415.257 MHz
    [ 2.871387] ata1: SATA link down (SStatus 0 SControl 300)
    [ 2.874721] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.878060] ata4: SATA link down (SStatus 0 SControl 300)
    [ 2.878096] ata3: SATA link down (SStatus 0 SControl 300)
    [ 2.895510] hub 8-0:1.0: USB hub found
    [ 2.895515] hub 8-0:1.0: 2 ports detected
    [ 2.895650] ohci-pci 0000:00:16.0: OHCI PCI host controller
    [ 2.895654] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
    [ 2.895665] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe6f3000
    [ 2.952187] hub 9-0:1.0: USB hub found
    [ 2.952192] hub 9-0:1.0: 4 ports detected
    [ 3.011462] usb 3-3: new high-speed USB device number 2 using ehci-pci
    [ 3.041482] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.042668] ata5.00: ATA-8: ST31000524AS, JC45, max UDMA/133
    [ 3.042671] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 3.044091] ata5.00: configured for UDMA/133
    [ 3.044818] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.046010] ata2.00: ATA-8: ST31000524AS, JC45, max UDMA/133
    [ 3.046012] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 3.047443] ata2.00: configured for UDMA/133
    [ 3.047593] scsi 1:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
    [ 3.047815] scsi 4:0:0:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
    [ 3.048310] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 3.048332] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 3.048407] sd 1:0:0:0: [sda] Write Protect is off
    [ 3.048410] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.048414] sd 4:0:0:0: [sdb] Write Protect is off
    [ 3.048416] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 3.048445] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.048454] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.082120] sdb: sdb1 < sdb5 >
    [ 3.082492] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 3.123617] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 3.124128] sd 1:0:0:0: [sda] Attached SCSI disk
    [ 3.258326] firewire_core 0000:03:00.0: created device fw0: GUID 001e8c0000dded87, S400
    [ 3.845323] Switched to clocksource tsc
    [ 3.887097] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 4.225475] usb 7-1: new low-speed USB device number 2 using ohci-pci
    [ 4.639033] usb 9-4: new full-speed USB device number 2 using ohci-pci
    [ 4.953305] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 4.973795] systemd[1]: Set hostname to <chaembian>.
    [ 5.179335] usb 6-4: new full-speed USB device number 2 using ohci-pci
    [ 5.596246] usb 6-5: new low-speed USB device number 3 using ohci-pci
    [ 5.801932] systemd[1]: Cannot add dependency job for unit vnstat.service, ignoring: Unit vnstat.service failed to load: No such file or directory.
    [ 5.801948] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 5.802146] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 5.802185] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 5.802193] systemd[1]: Starting Login Prompts.
    [ 5.802200] systemd[1]: Reached target Login Prompts.
    [ 5.802206] systemd[1]: Starting Remote File Systems.
    [ 5.802211] systemd[1]: Reached target Remote File Systems.
    [ 5.802218] systemd[1]: Starting Delayed Shutdown Socket.
    [ 5.802235] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 5.802240] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 5.802253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 5.802258] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 5.802272] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 5.802278] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 5.802294] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 5.802303] systemd[1]: Starting udev Kernel Socket.
    [ 5.802314] systemd[1]: Listening on udev Kernel Socket.
    [ 5.802321] systemd[1]: Starting udev Control Socket.
    [ 5.802332] systemd[1]: Listening on udev Control Socket.
    [ 5.802340] systemd[1]: Starting Journal Socket.
    [ 5.802364] systemd[1]: Listening on Journal Socket.
    [ 5.828144] systemd[1]: Started Load Kernel Modules.
    [ 5.837412] systemd[1]: Starting Apply Kernel Variables...
    [ 5.837770] systemd[1]: Starting udev Coldplug all Devices...
    [ 5.838054] systemd[1]: Starting Setup Virtual Console...
    [ 5.838365] systemd[1]: Starting Journal Service...
    [ 5.838647] systemd[1]: Started Journal Service.
    [ 6.402315] systemd-journald[139]: Vacuuming done, freed 0 bytes
    [ 7.319880] systemd-udevd[177]: starting version 208
    [ 7.794545] wmi: Mapper loaded
    [ 7.847347] parport_pc 00:05: reported by Plug and Play ACPI
    [ 7.847391] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 7.851969] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20130517/utaddress-251)
    [ 7.851974] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.874491] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
    [ 7.874519] sp5100_tco: PCI Revision ID: 0x41
    [ 7.874547] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
    [ 7.874557] sp5100_tco: Last reboot was not triggered by watchdog.
    [ 7.874600] sp5100_tco: initialized (0xffffc900123fcb00). heartbeat=60 sec (nowayout=0)
    [ 7.881641] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 7.881645] ACPI: Power Button [PWRB]
    [ 7.881697] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 7.881699] ACPI: Power Button [PWRF]
    [ 7.882757] ACPI: processor limited to max C-state 1
    [ 7.905064] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 7.918926] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 8.165090] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.165417] r8169 0000:05:00.0: irq 49 for MSI/MSI-X
    [ 8.165792] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc900123fe000, 20:cf:30:4c:49:a9, XID 0c200000 IRQ 49
    [ 8.165800] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 8.342332] MCE: In-kernel MCE decoding enabled.
    [ 8.346927] EDAC MC: Ver: 3.0.0
    [ 8.348961] AMD64 EDAC driver v3.4.0
    [ 8.349044] EDAC amd64: DRAM ECC disabled.
    [ 8.349073] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    (Note that use of the override may cause unknown side effects.)
    [ 8.495021] input: PC Speaker as /devices/platform/pcspkr/input/input2
    [ 8.558418] snd_ice1724 0000:06:05.0: enabling device (0000 -> 0001)
    [ 8.558556] snd_ice1724 0000:06:05.0: setting latency timer to 64
    [ 8.587452] ice1724: No matching model found for ID 0xffffffa0
    [ 8.588183] ice1724: Invalid EEPROM (size = 255)
    [ 8.588437] snd_ice1724: probe of 0000:06:05.0 failed with error -5
    [ 8.607952] microcode: CPU0: patch_level=0x010000b6
    [ 8.629397] ppdev: user-space parallel port driver
    [ 8.825646] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
    [ 8.825863] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
    [ 8.826029] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
    [ 8.826190] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 8.826357] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
    [ 8.826514] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
    [ 8.826667] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 8.826823] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 8.827628] snd_hda_intel 0000:01:05.1: setting latency timer to 64
    [ 8.868368] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input11
    [ 9.003261] microcode: CPU0: new patch_level=0x010000c8
    [ 9.003302] microcode: CPU1: patch_level=0x010000b6
    [ 9.003328] microcode: CPU1: new patch_level=0x010000c8
    [ 9.003357] microcode: CPU2: patch_level=0x010000b6
    [ 9.003381] microcode: CPU2: new patch_level=0x010000c8
    [ 9.003396] microcode: CPU3: patch_level=0x010000b6
    [ 9.003412] microcode: CPU3: new patch_level=0x010000c8
    [ 9.003552] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 9.031976] media: Linux media interface: v0.10
    [ 9.034867] Linux video capture interface: v2.00
    [ 9.043789] kvm: Nested Virtualization enabled
    [ 9.043793] kvm: Nested Paging enabled
    [ 9.244784] hidraw: raw HID events driver (C) Jiri Kosina
    [ 9.423576] usbcore: registered new interface driver usbhid
    [ 9.423583] usbhid: USB HID core driver
    [ 9.513383] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input12
    [ 9.513638] hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input0
    [ 9.514469] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/input/input13
    [ 9.514899] hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:13.0-1/input1
    [ 9.516355] input: C-Media Electronics Inc. Philips SPA5210 as /devices/pci0000:00/0000:00:16.0/usb9/9-4/9-4:1.2/input/input14
    [ 9.516925] hid-generic 0003:0D8C:0126.0003: input,hidraw2: USB HID v1.00 Device [C-Media Electronics Inc. Philips SPA5210] on usb-0000:00:16.0-4/input2
    [ 9.595842] hid-generic 0003:051D:0002.0004: hiddev0,hidraw3: USB HID v1.00 Device [American Power Conversion Back-UPS RS 1000G-IN FW:900.L4 .I USB FW:L4 ] on usb-0000:00:12.0-4/input0
    [ 9.596476] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input15
    [ 9.596993] hid-generic 0003:046D:C05B.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-5/input0
    [ 9.885366] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 9.886617] ata5.00: failed to set xfermode (err_mask=0x100)
    [ 10.370083] set resolution quirk: cval->res = 384
    [ 10.370534] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b)
    [ 10.385720] input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input16
    [ 10.385897] usbcore: registered new interface driver uvcvideo
    [ 10.385902] USB Video Class driver (1.1.1)
    [ 10.443673] usbcore: registered new interface driver snd-usb-audio
    [ 10.530521] Adding 995992k swap on /dev/sda7. Priority:-1 extents:1 across:995992k FS
    [ 17.204835] systemd-journald[139]: Received request to flush runtime journal from PID 1
    [ 17.564410] systemd-journald[139]: Vacuuming done, freed 4194304 bytes
    [ 17.564429] systemd-journald[139]: Vacuuming done, freed 0 bytes
    [ 17.594012] systemd-journald[139]: Vacuuming done, freed 4198400 bytes
    [ 17.594091] systemd-journald[139]: Deleted empty journal /run/log/journal/e44c../[email protected] (684032 bytes).
    [ 17.594101] systemd-journald[139]: Vacuuming done, freed 684032 bytes
    [ 18.430485] r8169 0000:05:00.0 eth0: link down
    [ 18.430501] r8169 0000:05:00.0 eth0: link down
    [ 18.430540] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 20.057527] r8169 0000:05:00.0 eth0: link up
    [ 20.057545] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 26.308009] systemd-journald[139]: File /var/log/journal/e44c../user-1004.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 31.900749] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
    [ 32.146160] fuse init (API version 7.22)
    [ 63.406994] systemd-journald[139]: File /var/log/journal/e44c../user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    I did not get any output when I tried: " journalctl -b --dmesg | grep systemd". However, when I tried  "journalctl | grep systemd", I got these:
    Nov 17 23:26:51 chaembian systemd[1]: Starting Sound Card.
    Nov 17 23:26:51 chaembian systemd[1]: Reached target Sound Card.
    Nov 17 23:26:52 chaembian systemd[1]: Found device ST31000524AS.
    Nov 17 23:26:52 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/cd1ecac7-97b5-4bcc-b114-858efb77e4c5...
    Nov 17 23:26:52 chaembian systemd[1]: Found device ST31000524AS.
    Nov 17 23:26:52 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/8f972288-02c8-4dd7-a590-400f4fe60244...
    Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
    Nov 17 23:26:53 chaembian systemd[1]: Activating swap /dev/disk/by-uuid/cf5549b8-edd7-465a-985c-c096f39b916e...
    Nov 17 23:26:53 chaembian systemd-fsck[254]: fsck.jfs version 1.1.15, 04-Mar-2011
    Nov 17 23:26:53 chaembian systemd-fsck[254]: processing started: 11/17/2013 23:26:53
    Nov 17 23:26:53 chaembian systemd-fsck[254]: The current device is: /dev/sda9
    Nov 17 23:26:53 chaembian systemd-fsck[254]: Block size in bytes: 4096
    Nov 17 23:26:53 chaembian systemd-fsck[254]: Filesystem size in blocks: 50000094
    Nov 17 23:26:53 chaembian systemd-fsck[254]: **Phase 0 - Replay Journal Log
    Nov 17 23:26:53 chaembian systemd-fsck[254]: Filesystem is clean.
    Nov 17 23:26:53 chaembian systemd[1]: Started File System Check on /dev/disk/by-uuid/8f972288-02c8-4dd7-a590-400f4fe60244.
    Nov 17 23:26:53 chaembian systemd[1]: Activated swap /dev/disk/by-uuid/cf5549b8-edd7-465a-985c-c096f39b916e.
    Nov 17 23:26:53 chaembian systemd[1]: Starting Swap.
    Nov 17 23:26:53 chaembian systemd[1]: Reached target Swap.
    Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
    Nov 17 23:26:53 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/b36313d6-8efb-444c-b6c9-0d3ca3bdaad1...
    Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
    Nov 17 23:26:53 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/e4ee5aff-ef4a-436c-9385-cb37b98df3e1...
    Nov 17 23:26:53 chaembian systemd[1]: Found device ST31000524AS.
    Nov 17 23:26:53 chaembian systemd[1]: Starting File System Check on /dev/disk/by-uuid/da692a03-33e5-4aad-b716-7dedfea99f85...
    Nov 17 23:26:53 chaembian systemd-fsck[267]: fsck.jfs version 1.1.15, 04-Mar-2011
    Nov 17 23:26:53 chaembian systemd-fsck[267]: processing started: 11/17/2013 23:26:53
    Nov 17 23:26:53 chaembian systemd-fsck[267]: The current device is: /dev/sda8
    Nov 17 23:26:53 chaembian systemd-fsck[267]: Block size in bytes: 4096
    Nov 17 23:26:53 chaembian systemd-fsck[267]: Filesystem size in blocks: 24999140
    Nov 17 23:26:53 chaembian systemd-fsck[267]: **Phase 0 - Replay Journal Log
    Nov 17 23:26:53 chaembian systemd-fsck[267]: Filesystem is clean.
    Nov 17 23:26:53 chaembian systemd[1]: Started File System Check on /dev/disk/by-uuid/b36313d6-8efb-444c-b6c9-0d3ca3bdaad1.
    Nov 17 23:26:53 chaembian systemd[1]: Mounting /home...
    Nov 17 23:26:53 chaembian systemd-fsck[273]: fsck.jfs version 1.1.15, 04-Mar-2011
    Nov 17 23:26:53 chaembian systemd-fsck[273]: processing started: 11/17/2013 23:26:53
    Nov 17 23:26:53 chaembian systemd-fsck[273]: The current device is: /dev/sda10
    Nov 17 23:26:53 chaembian systemd-fsck[273]: Block size in bytes: 4096
    Nov 17 23:26:53 chaembian systemd-fsck[273]: Filesystem size in blocks: 161393838
    Nov 17 23:26:53 chaembian systemd-fsck[273]: **Phase 0 - Replay Journal Log
    Nov 17 23:26:53 chaembian systemd-fsck[273]: Filesystem i

  • Stopped receiving email messages

    I have a Blackberry Curve 8300 and my ISP is earthlink.net. Everything has been working fine until today, when I stopped receiving email messages on my Blackberry. I just checked, and I can send messages fine, evidently, but not receiving them.
    Solved!
    Go to Solution.

    Hmmm...I'd suggest a couple of things. First, a reboot:
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation.
    If that fails, then try resending your service books:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02830&slic...
    Give those a try and let us know.
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ITunes has stopped working error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS.  Why?!

    For some reason, I keep getting the "iTunes has stopped working" error message on my Dell Latitude E6520 when trying to sync photos to my iPhone 3GS.  I am using Windows 7 on my 64-bit computer.  iTunes will begin to optimize the photos in the folder I have directed it to (I am trying to load almost 3000 photos and videos), and it will go through optimizing all of them singularly, then get to the step where it says "optimizing" again, but does so in bigger groups.  It will get to about 2000, and then the error message "iTunes has stopped working" will pop up, and say that "Windows must close the program and will search for a solution, and if it finds one, it will notify me".  Why can't I sync these photos, and what can I do?  Thanks so much for the help, I really appreciate it!

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

  • OSD Failure - Windows 7 - Blue Screen on First Boot in Full OS

    Hi,
    We are experiencing a really strange problem with our OSD which is hard to pin down. Our setup is SCCM 2012 R2 with 4 PXE enabled DP's (VMWare VMs) across 2 data centers and on seperate hosts and we are delivering Windows 7 (32 and 64) with recaptured WIM
    files. Ouor deployments work fine for around a week and then they suddenly start experiencing a reboot look and blue screening at the first boot into the full OS.
    This occurs on multiple different physical machines and we inject driver packages for different builds with WMI filters on motherboard as is common. The really weird part is that this will work for days then stop working. The only workaround we have is to
    recapture the WIM file (we have a build and capture task sequence for this) and then it works again, even though the content and drivers are exactly the same from the same B+C task sequence. Even the windows updates are the same with no new ones. It doesn't
    seem to be the drivers themselves but rather the process of DISM injecting them offline in windows PE which appears to break the registry. The last thing we see before blue screen is "Updating registry" in windows 7 boot.
    These are the things we have tried are...
     - Recapturing the WIM (works for around a week but not a fixed period)
     - Host the WIM on a physical DP (to rule out VMWare) with only the WIM and a single driver package. Again this worked fine for a week or so.
     - Built several different physical machines. All fine but when this stops, it stops for all of them
     - If we remove all drivers but the LAN driver it can work but our testing has ruled out a specific bad driver as we have used different models of machine and if it was, then it would never work.
     - We have set the TFTP block size to default of 1024 (we had it higher as 8192) to rule out the boot image being corrupted on download. It made no difference other than being a lot slower.
     - Compared MD5 hashes for the WIM to rule out corruption.
     - Removed and redistributed the WIM and drivers to different DP's (that it had never been on before)
    The DISM.log on a failed device shows entries like
    CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}C:/Windows/System32/config/SOFTWARE, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
    Any advice would be greatly appreciated. This question on
    Dell's forum sounds very similar.
    What we are really struggling with is why would the same WIM, with the same driver package, from the same distribution point, to the same physical machine, work every day for a week the permanently break? Aaargh!
    Thanks everyone,
    Shaun

    Hi,
    Have this problem been resolved? How?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Need ugly boot message

    I'm new to the mac pro and I have to run WinXP XP is up and configured but but have an issue now that I've installed an Adaptec RAID card.
    I've installed an Adaptec RAID contoller in Slot 2. It is connected only to disks 3 and 4, not to the boot disk. The Mac boots into OS X with no problem. Using the diagnostics util, I can see the card reported in the PCI slot.
    The problem is that when I select WinXP for boot, the system hangs with a black screen and a blinking cursor even before Windows gets a chance to boot. The Adaptec manual says i need to press Ctrl-A to get to the RAID controller configuration. However, I'm never prompted for the Ctrl-A and when I simply press Ctrl-A on boot, the keys seem to be ignored.
    I worry that the RAID controller is taking over the boot sequence but I can't override this since I can't get to the controller config util. How does one access the ugly boot messages on a Mac? Thanks.

    The card is an Adaptec 3405. I've got two 500 Gig Seagates attached to it.
    I didn't want XP dealing with the RAID until I had the bootcamp stuff all working. So I XP installed first. I'm very experienced in XP, just not the Mac.
    The drives are connected directly to the RAID card via SATA cables. I modified the Mac drive bays 3 & 4 by unscrewing the SATA+power connecters at the end of the drive to make room for the SATA connectors going to the card. Drive power is tapped from the power connector in the 2nd CD bay.
    I tried not attacheing the drives but no change. Thanks for your help on this.

  • Can't install iTunes 11 on Widows 8, 'iTunes has stopped working' error message

    Two months ago, I bought a new computer that uses Windows 8.  I was running iTunes 10.6 on it fine until today, when it crashed for some unknown reason.  Every time I've tried to open it again, I kept on getting a 'iTunes has stopped working' message.  I've uninstalled 10.6 and tried installing iTunes 11, but keep getting the same 'iTunes has stopped working' error message with no other details.  I've tried installing it as an administrator, but got same failed results.
    Any help?
    Thanks, Mike

    Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
    So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Maybe you are looking for

  • Multiple iTunes accounts with iPad2.

    I have the following scenario: We have purchased several iPads for our employees and we are trying to find the best way to administer them. We would like to be abble to: 1. Users to use their home computer and personal iTunes account to purchase apps

  • Need help with reading RSS feed from SSIS

    Hi all, I am trying to read RSS feed from SSIS by using the Script Component. So far I am able to read some information from the RSS feed from the following items included in the code, Title, PublishDate, LastUpdateTime, Id and Summary. There are sti

  • HTML comment replication

    We recently upgraded from RH5 to RH7 and I am running RH version 7.00.145 on my machine. After upgrading, we found there were problems with em dashes and en dashes, in that they displayed as &emdash; or &endash in our output. We corrected this with a

  • N91 and Route66 connectivity problem

    Hi to all. I've problem with my N91 and Route 66 in bluetooth communication between GPS receiver (Nokia LD-3W) and handset. The communication is not fluid because steaming data (GPS coordinates) isn't continuous. Infact the navigation cursor, during

  • Where is my Video Sound?

    Hello every one. The Issue im having is that when I render a video and then i transfer it to Premier Pro, it does not have sound. Am I missing a step? Thanks!