SOLVED:Strange behaviour:request shows results in Answers not in dashboard

Hi all,
I've come across somethings very strange, which I know has to do with the lowest level of detail of my organisation hierarchy (and the keys used at that level), but I cant understand why its doing the following:
I have a table in a dashboard that can receive 'is prompted' filter values from a prompt on the same dashboard. When i created this request in answers, for test reasons i gave it values for a "centre" (lowest level of the organization hierarchy), and it displays resultos for my metrics.
Now I place this request on a dashboard. I have removed my manual test filters, and left the four organization columns of the request as "is prompted", the lowest of these being the centre value. Now in the dashboard, i decide to enter a value directly for the centre dropdown (same value as i previously tested) in my prompt...i get no results found!!!
The lowest level of this prompt has a key made of two atributes (center and center code), this allows me to "drill down" from the centre to the centre code, although centre code is at the same level. If i remove the drilldown capability, the problem is solved...im not quite sure why.
Message was edited by:
zjac

The problem was with the actual data. WHen analyzing the query that was being done, i realised that one of the keys (the centre name) was using a text field that has spaces after the name of the centre (god knows why), so using a trim resolved the issue.
I guess the other configuration was using the centre id which was not encountering the above problem.

Similar Messages

How do I mark question as helpful? Only "this solved my problem" is showing on the answer.

How do I mark question as helpful? Only "this solved my problem" is showing on the answer.

Yes, ONLY two "This helped me" can be clicked.
Only ONE This solved my question" can be clicked.
Message was edited by: b j t

Simple but strange behaviour of "suppress result rows"

Hi,
In one of the Query, for all the characteristics, the result rows are suppressed but strangely when i execute it on web i see the result row is getting dispalyed for one char.
But when i go back and check my query designer,for every char i see suppress result row is set to Always...but i don't know why it is not reflecting on the web
Now can any one please suggest how to suppress this on web permanently..
Note:on the Web we can select the char and right click and change this feature in properties but it is a one time actitivity,Becuase when we try to execute the report once gain the result row again appreaing!!!
when we execute the same report in BEx analyzert eh result rows is NOT shown up but only in web it is apprearing
Is there any permanent way????????

Hi Swapna,
If you get the same behaviour after reopening the Web Template, you can use command "SET_RESULT_VISIBILITY" to suppress the result rows of that characteristic at Web Template level.
Check this link for more details.
http://help.sap.com/saphelp_nw70/helpdata/en/43/d828d988ef05f6e10000000a11466f/frameset.htm
Regards,
Rk.

[SOLVED] Strange behaviour of Query-by-Example (QBE) fields

Hello,
Jdev 11g TP3.
We have a QBE-Block with input fields.
Follwing steps are performed:
1) Change to find mode: #{bindings.Find.execute}
2) Enter search criteria into the fields
3) execute query: #{bindings.Execute.execute}
4) change to find mode again --> previously entered search criterias are shown --> OK
5) clear the search criteria in all fields
6) execute query again
7) PROBLEM: query is executed with the OLD search criteria again.
If we change into query mode again, the OLD search criterias are shown again
(BUT not for ALL fields).
8) Even wildcards (* or %) doesn't change the situation.
But it's possible to enter a different (but not empty) search criteria into the field.
Details:
=====
For some of the QBE-Fields the search criteria can be cleared but for some of them not.
Differences between this fields:
a) mandatory fields (also part of the key in the view model and NOT NULL in DB) --> criteria can't be cleared
b) non-mandatory fields (also not part of the view model and NULL-able in DB) --> criteria can be cleared
I tried to change one of the mandatory fields to non-mandatory and to be not part of the key in the view model but behaviour doesn't change?
Can anybody confirm this behaviour as bug or is there a mistake on my side?
BR
Peter
Message was edited by:
hofespet

Seems to be solved in TP4.
br
Peter

[SOLVED] Strange behaviour of XFce after pressing certain keys

I noticed that when I press 'Ctrl' and hold it for a while all my currently opened windows will close and I am no longer able to access the Applications Menu on my panel until reboot.
I also noticed, that when I press Ctrl+Alt+Delete combination my xfce-session is 'terminated' and I am in console environment (with a login prompt).
Now, I don't know if this type of behaviour is normal, but I do not like it at all.
I know Ctrl+Alt+Delete should lock the screen, but why I am in console then?
And why after pressing 'Ctrl' all my currently opened Windows are gone? (or at least not visible and not minimized)
Any ideas?
Thanks,
P.S. I have slim set up to auto-login my user account, but I do not think this is relevant.
EDIT: Ok, fixed - I realized that I pressed some keys when I was changing the battery on my laptop and did not lock the screen :-) [Stupid me].
Last edited by MatejLach (2011-10-21 13:35:20)

swiergot wrote:(if memory serves)
Well, it doesn't. To make things worse, my sight is not good either. The devices are present in /dev and I did change configuration.
It turned out to be a permissions problem. I was doing some cleaning in /etc, getting rid of *.pacnew and *.pacsave and I apparently overwrote /etc/group so my user account lost its group assignments. The errors thrown by mplayer were a little confusing because they mentioned "no such file", while in reports from other users with similar problems I could clearly see "permission denied". Only when running mplayer with "-ao oss" it correctly reported "permission denied" on /dev/dsp.
KDE must be simply assigning permissions when it detects a new device, perhaps it has something to do with ConsoleKit. It would also explain why you have to actually be in Konsole when modprobing because it wouldn't work in a text console even with KDE running in the background.
Anyway, sorry for bothering. Have a nice day, or good night, depending on your timezone
Last edited by swiergot (2009-11-22 08:38:27)

[Solved]Strange behaviour of copy in File Managers (pcmanfm, nautlius)

Hi, I'm having the weirdest problem I just can't get solved:
With my default file manager (pcmanfm) I can't copy any files! Everytime I try it gives me the following error:
"Cannot copy a folder into its sub folder"
The same action from cli with cp command works without any problems.
Moving a file with pcmanfm works without any problems though.
I also tried nautilus and xfe. With thouse file managers I can copy file, but only if I copy them twice. So the first time I select a file and copy it, right click somewhere, the "paste" function is grayed out. If I copy the file again, I can paste...
Any thoughts? It's driving me crazy.
FYI: I'm running compiz standalone and installed this system just 2 days ago.
Edit: It also seems to work with pcmanfm if I copy the file TWICE.
Last edited by justl (2011-08-26 16:53:18)

Ok so I kept digging and trying some stuff and it seems the problem is being caused by parcellite.
If I quit parcellite copying files works again how it should.
So I guess this is a parcellite bug? The strange thing is I run parcellite also on my other boxes and never had any problems so I'm not sure where this problem suddenly comes from..

[Solved] Strange behaviour when searhing files in Gnome 3.8 overview

Searching for "spot" finds the file "The Ink Spots - Maybe.mp3" but searching for "maybe" does not. Any ideas?
Last edited by discon (2013-06-13 07:51:38)

OK, I think I got it. "maybe" is a stop word and, apparently, file names are treated as *text* so "maybe" is ignored.
$ tracker-search spots
Results:
file:///home/.../The%20Ink%20Spots%20-%20Maybe.mp3
The Ink Spots - Maybe.mp3
$ tracker-search maybe
Search term 'maybe' is a stop word.
Stop words are common words which may be ignored during the indexing process.
Results:
$

[SOLVED] Strange behaviour of gnome-terminal and xterm

Hello,
I've been on Archlinux for 2 days, and I have a strange problem with gnome-terminal and xterm. When I write a too long command on a line, the text continues from the beginning of this line erasing the text, instead of going to a new line. Do you have any idea of how to fix that?
Thanks a lot!
Last edited by crotte (2008-04-13 21:59:34)

Seems to be in a fresh install, too. I didn't change any setting of bash and no PS1.
I still can't reproduce it... I hate those errors. :-(
Edit:
Fixed by using zsh now.
Last edited by Misery (2008-05-16 08:48:44)

[SOLVED] Strange behaviour of audio driver

Hi,
I'm having a very strange problem with sound on my Asus laptop. It started yesterday when I rebooted the machine after five days of running. During that time I didn't upgrade any important package nor did I change any configuration (if memory serves).
So yesterday when I logged into KDE I got a message saying that audio devices were gone. When I tried mplayer to see if it's a KDE thing, it complained about non-existing sound card and it was actually true as there were no sound related files under /dev, even though all audio modules were loaded. I removed all of them and modprobed snd-hda-intel. KDE immediately detected audio devices and sound was back everywhere.
Now the funny part. I rebooted again and before logging into KDE, I checked the sound in a console, no luck. I repeated what I did previously to bring the sound back, that is rmmod&modprobe. But this time it didn't work. Then I logged into KDE and tried again, guess what, sound was back!
So what is it that KDE is doing? At the end exactly the same modules are loaded, the only difference is that hd-audio0 process is not running when the driver is loaded without KDE.
Any ideas?
Last edited by swiergot (2009-11-22 08:37:43)

swiergot wrote:(if memory serves)
Well, it doesn't. To make things worse, my sight is not good either. The devices are present in /dev and I did change configuration.
It turned out to be a permissions problem. I was doing some cleaning in /etc, getting rid of *.pacnew and *.pacsave and I apparently overwrote /etc/group so my user account lost its group assignments. The errors thrown by mplayer were a little confusing because they mentioned "no such file", while in reports from other users with similar problems I could clearly see "permission denied". Only when running mplayer with "-ao oss" it correctly reported "permission denied" on /dev/dsp.
KDE must be simply assigning permissions when it detects a new device, perhaps it has something to do with ConsoleKit. It would also explain why you have to actually be in Konsole when modprobing because it wouldn't work in a text console even with KDE running in the background.
Anyway, sorry for bothering. Have a nice day, or good night, depending on your timezone
Last edited by swiergot (2009-11-22 08:38:27)

Solved - Strange behaviour in NetBeans 5.5 (and SE 6)

I am using NB 5.5 and I created a new JInternalFrame and choose Free Design then it created the Layout like following (works perfectly this way):
javax.swing.GroupLayout caixaOcorrenciaLayout = new javax.swing.GroupLayout(caixaOcorrencia);
        caixaOcorrencia.setLayout(caixaOcorrenciaLayout);
        caixaOcorrenciaLayout.setHorizontalGroup(
            caixaOcorrenciaLayout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
            .addGroup(javax.swing.GroupLayout.Alignment.TRAILING, caixaOcorrenciaLayout.createSequentialGroup()
                .addGap(12, 12, 12)
                .addGroup(caixaOcorrenciaLayout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING, false)
                    .addComponent(jLabel4, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .addComponent(jLabel6, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
                    .addComponent(jLabel2, javax.swing.GroupLayout.Alignment.LEADING, javax.swing.GroupLayout.DEFAULT_SIZE, 86, Short.MAX_VALUE)
                    .addComponent(jLabel8, javax.swing.GroupLayout.Alignment.LEADING))
                .addGap(16, 16, 16)
                .addGroup(caixaOcorrenciaLayout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING)
                    .addComponent(cbOcorrencia, javax.swing.GroupLayout.Alignment.LEADING, 0, 461, Short.MAX_VALUE)
                    .addGroup(javax.swing.GroupLayout.Alignment.LEADING, caixaOcorrenciaLayout.createSequentialGroup()
                        .addComponent(campoNumeroNota, javax.swing.GroupLayout.PREFERRED_SIZE, 102, javax.swing.GroupLayout.PREFERRED_SIZE)
                        .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED, 89, Short.MAX_VALUE)
                        .addComponent(jLabel3)
                        .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                        .addComponent(campoCNPJ, javax.swing.GroupLayout.PREFERRED_SIZE, 150, javax.swing.GroupLayout.PREFERRED_SIZE))
                    .addGroup(javax.swing.GroupLayout.Alignment.LEADING, caixaOcorrenciaLayout.createSequentialGroup()
                        .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                        .addGroup(caixaOcorrenciaLayout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                            .addComponent(campoTextoLivre, javax.swing.GroupLayout.Alignment.TRAILING, javax.swing.GroupLayout.DEFAULT_SIZE, 461, Short.MAX_VALUE)
                            .addGroup(caixaOcorrenciaLayout.createSequentialGroup()
                                .addComponent(calData, javax.swing.GroupLayout.PREFERRED_SIZE, 121, javax.swing.GroupLayout.PREFERRED_SIZE)
                                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                                .addComponent(jLabel5)
                                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                                .addComponent(campoHora, javax.swing.GroupLayout.PREFERRED_SIZE, 65, javax.swing.GroupLayout.PREFERRED_SIZE)
                                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                                .addComponent(jLabel7)
                                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                                .addComponent(cbObservacao, javax.swing.GroupLayout.PREFERRED_SIZE, 155, javax.swing.GroupLayout.PREFERRED_SIZE)))))
                .addGap(12, 12, 12))
            .addGroup(javax.swing.GroupLayout.Alignment.TRAILING, caixaOcorrenciaLayout.createSequentialGroup()
                .addContainerGap(421, Short.MAX_VALUE)
                .addComponent(btnConfirmar, javax.swing.GroupLayout.PREFERRED_SIZE, 155, javax.swing.GroupLayout.PREFERRED_SIZE)
                .addContainerGap())
        );But when I added a JPanel to a JTabbedPane (in an old JInternalFrame I had already) and choose Free Design, it created the Layout as following:
org.jdesktop.layout.GroupLayout painelOcorrenciaLayout = new org.jdesktop.layout.GroupLayout(painelOcorrencia);
        painelOcorrencia.setLayout(painelOcorrenciaLayout);
        painelOcorrenciaLayout.setHorizontalGroup(
            painelOcorrenciaLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
            .add(painelOcorrenciaLayout.createSequentialGroup()
                .add(20, 20, 20)
                .add(jLabel42, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 110, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
                .add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 300, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
        );I dont want to use JDesktop, I want to use the Swing package, but what can I do since NB does that (the codification) by it self?
Thanks
F.
Message was edited by:
Franzisk

I dont want to use JDesktop, I want to use the Swing
package, but what can I do since NB does that (the
codification) by it self?I assume your question is that you don't want to use the org.jdesktop.layout.GroupLayout class, but the new Java6 javax.swing.GroupLayout. To switch between the two, do the following:
1. Open the respective form.
2. In the projects pane, open the sub-items of the form class (the small "+" before the entry).
3. Click on the "Form" element (for example, if you have an "AboutDialog.java", there are the "AboutDialog" and the "Form AboutDialog" elements there.)
4. In the properties of the "Form", switch the "Layout Generation Style" to "Standard Java 6 Code".
This one had me quite a bit; I've had the converse problem, wanting to make an application compatible with Java 5. The thing is, it doesn't change anything for already-generated forms if you change this setting in the global options... and you can't change it manually, as you said, because it's in the generated code.

Camera tracker solving without errors but not showing result points

hi
I am trying the new camera tracker in AE cs6,
im using very simple shots that can be tracked easily,
and im having some strange behaviours,
basically in many shots the analysis takes places with no errors but after the camera solve no result points appear, even if i use the advanced mode , changing all other parameters etc, and no errors are reported anywhere, also i select the effect on the panel and i also make sure the points size parameters are scaled up,
but if i click on processing points (the unchecked box below 3d solve) i can see they are all there, and i can also create camera and the camera is created, so its as if all the process takes place correctly but for some reason the solve points are not shown on screen
it has happened to me that with same shot sometimes they appeared and sometimes not, but most times they dont
what can be happening in here?
thanks so much

will try to explain better my problem
if i click on
Render Track Points
i can see there are great track points that follow all the movement perfectly,
and yet without checking that box no solve points appear, even when i select the effect on effects panel
or change any other parameter or do the advanced mode
i can still click on create camera etc, but i cannot attach a text etc to a specific solve point because no solve points appear
and yet as i say, if i click on the Render Track Points box i can see great tracking points all over the place following the action
so the fact that selecting Render Track Points on effects panel shows great perfect points following all , does that confirm that camera solve was successful?
i just cannot understand why i cannot see any solve points that i can interact with
i have tried to scale sizes all the way up, select effect on panel and hundred other things
thank you for any help

[SOLVED] French Canadian keyboard strange behaviour

Hello!
I just upgraded to Gnome 2.30 in [testing] and my keyboard has a strange behaviour. With Gnome 2.28, my keyboard layout was set to Canadian French (legacy), and still is, though some of the keys do not behave the same. For instance, the accents "`", "¸" and ^ do not behave as usual, but rather give me some letter with that accent on it, rather than letting me choose the letter on which put the accent.
Moreover, the SHIFT+3 combination gives me a # instead of a /, but not in all software. Google Chrome has the good behaviour, but gnome-terminal gives me a #.
Do you understand any of this?
I'll post the packages I have upgraded.
[2010-04-05 01:09] upgraded openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:09] upgraded python (2.6.5-2 -> 2.6.5-3)
[2010-04-05 01:09] upgraded pygobject (2.20.0-1 -> 2.21.1-1)
[2010-04-05 01:09] upgraded pygtk (2.16.0-2 -> 2.17.0-1)
[2010-04-05 01:09] upgraded gnome-menus (2.28.0.1-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libsoup (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libldap (2.4.21-1 -> 2.4.21-2)
[2010-04-05 01:09] upgraded libidl2 (0.8.13-1 -> 0.8.14-1)
[2010-04-05 01:09] upgraded orbit2 (2.14.17-1 -> 2.14.18-1)
[2010-04-05 01:09] upgraded gconf (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:09] upgraded gnome-keyring (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:09] upgraded libsoup-gnome (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded gnome-icon-theme (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libgweather (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded evolution-data-server (2.28.3.1-1 -> 2.30.0-2)
[2010-04-05 01:10] upgraded gnome-desktop (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libwnck (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libunique (1.1.6-1 -> 1.1.6-2)
[2010-04-05 01:10] upgraded gnome-disk-utility (2.28.1-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libarchive (2.8.3-1 -> 2.8.3-3)
[2010-04-05 01:11] upgraded smbclient (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:11] upgraded gvfs (1.4.3-1 -> 1.6.0-1)
[2010-04-05 01:11] upgraded gnome-vfs (2.24.2-2 -> 2.24.3-2)
[2010-04-05 01:11] upgraded libbonobo (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded libgnome (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libart-lgpl (2.3.20-1 -> 2.3.21-1)
[2010-04-05 01:11] upgraded libgnomecanvas (2.26.0-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libbonoboui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded librsvg (2.26.0-2 -> 2.26.2-1)
[2010-04-05 01:11] upgraded gnome-panel (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libgnomeui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded gnome-python (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:11] upgraded alacarte (0.12.4-2 -> 0.13.1-1)
[2010-04-05 01:11] upgraded apache (2.2.15-1 -> 2.2.15-2)
[2010-04-05 01:11] upgraded at-spi (1.28.1-1 -> 1.30.0-1)
[2010-04-05 01:11] upgraded totem-plparser (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded brasero (2.28.3-2 -> 2.30.0-1)
[2010-04-05 01:12] upgraded icu (4.2.1-1 -> 4.4-1)
[2010-04-05 01:12] upgraded brltty (4.1-2 -> 4.1-3)
[2010-04-05 01:12] upgraded libgtop (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:12] upgraded bug-buddy (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded cheese (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded clutter (1.0.10-1 -> 1.2.4-1)
[2010-04-05 01:12] upgraded clutter-gtk (0.10.2-1 -> 0.10.2-2)
[2010-04-05 01:12] upgraded libxklavier (4.0-1 -> 5.0-1)
[2010-04-05 01:12] upgraded libgnomekbd (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded gnome-settings-daemon (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded zenity (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded metacity (2.28.1-1 -> 2.30.0-2)
[2010-04-05 01:13] upgraded gnome-control-center (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded compiz-decorator-gtk (0.8.4-2 -> 0.8.4-3)
[2010-04-05 01:13] upgraded libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded openslp (1.2.1-2 -> 1.2.1-3)
[2010-04-05 01:13] upgraded cups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded curl (7.20.0-1 -> 7.20.0-2)
[2010-04-05 01:13] upgraded cvs (1.11.23-4 -> 1.11.23-5)
[2010-04-05 01:13] upgraded postgresql-libs (8.4.3-1 -> 8.4.3-2)
[2010-04-05 01:13] upgraded cyrus-sasl-plugins (2.1.23-1 -> 2.1.23-2)
[2010-04-05 01:13] upgraded cyrus-sasl (2.1.23-3 -> 2.1.23-4)
[2010-04-05 01:13] upgraded dbus-python (0.83.0-2.1 -> 0.83.1-1)
[2010-04-05 01:13] upgraded gnome-python-desktop (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded deskbar-applet (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded dnsutils (9.6.1-2 -> 9.6.1-3)
[2010-04-05 01:14] upgraded eog (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded libwebkit (1.1.15.4-3 -> 1.1.90-2)
[2010-04-05 01:14] upgraded gobject-introspection (0.6.6-1 -> 0.6.9-1)
[2010-04-05 01:14] upgraded epiphany (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded evince (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:14] upgraded gtkhtml (3.28.3-1 -> 3.30.0-1)
[2010-04-05 01:14] upgraded evolution-exchange (2.28.3-1 -> 2.30.0-2)
[2010-04-05 01:14] upgraded evolution-webcal (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:14] upgraded file-roller (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gcalctool (5.28.2-1 -> 5.30.0-1)
[2010-04-05 01:15] upgraded gconf-editor (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gnome-session (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gdm (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gtksourceview2 (2.8.2-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded pygtksourceview2 (2.8.0-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded gedit (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded git (1.7.0.3-1 -> 1.7.0.4-1)
[2010-04-05 01:15] upgraded libsigc++2.0 (2.2.4.2-1 -> 2.2.5-1)
[2010-04-05 01:15] upgraded glibmm (2.22.1-1 -> 2.24.0-1)
[2010-04-05 01:15] upgraded gucharmap (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-applets (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-backgrounds (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-bluetooth (2.28.6-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded vte (0.22.5-1 -> 0.24.0-2)
[2010-04-05 01:16] upgraded gnome-desktop-sharp (2.26.0-3 -> 2.26.0-5)
[2010-04-05 01:16] upgraded gnome-doc-utils (0.18.1-1 -> 0.20.0-1)
[2010-04-05 01:17] upgraded gnome-games (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-games-extra-data (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-mag (0.15.9-1 -> 0.16.1-1)
[2010-04-05 01:17] upgraded gnome-media (2.28.5-1 -> 2.30.0-2)
[2010-04-05 01:17] upgraded gnome-netstatus (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:17] upgraded gnome-nettool (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-power-manager (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-screensaver (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gtkmm (2.18.2-1 -> 2.20.0-1)
[2010-04-05 01:17] upgraded gnome-system-monitor (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:18] upgraded system-tools-backends (2.8.3-1 -> 2.10.0-1)
[2010-04-05 01:18] upgraded liboobs (2.22.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded nautilus (2.28.4-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-system-tools (2.28.2-1 -> 2.30.0-2)
[2010-04-05 01:18] upgraded gnome-terminal (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gtk-engines (2.18.5-1 -> 2.20.0-1)
[2010-04-05 01:18] upgraded gnome-themes (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-user-share (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-utils (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded xulrunner (1.9.2.2-2 -> 1.9.2.3-1)
[2010-04-05 01:19] upgraded yelp (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gnome2-user-docs (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gok (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded grep (2.6.2-1 -> 2.6.3-1)
[2010-04-05 01:19] upgraded gstreamer0.10-bad (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded neon (0.28.6-2 -> 0.28.6-4)
[2010-04-05 01:19] upgraded gstreamer0.10-bad-plugins (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded hamster-applet (2.28.2-1 -> 2.30.0.1-1)
[2010-04-05 01:19] upgraded net-snmp (5.5-2 -> 5.5-3)
[2010-04-05 01:19] upgraded hplip (3.9.12-5 -> 3.10.2-1)
[2010-04-05 01:20] upgraded imap (2007e-1 -> 2007e-2)
[2010-04-05 01:20] upgraded jre (6u18-2 -> 6u19-2)
[2010-04-05 01:21] upgraded kdebase-workspace (4.4.2-1 -> 4.4.2-2)
[2010-04-05 01:21] upgraded kernel26-firmware (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26 (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26-headers (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded lib32-glib2 (2.22.5-1 -> 2.24.0-1)
[2010-04-05 01:24] upgraded lib32-atk (1.28.0-1 -> 1.30.0-1)
[2010-04-05 01:24] upgraded lib32-e2fsprogs (1.41.10-1 -> 1.41.11-1)
[2010-04-05 01:24] upgraded lib32-openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:24] upgraded lib32-heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:24] upgraded lib32-libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:24] upgraded lib32-pango (1.26.2-1 -> 1.28.0-1)
[2010-04-05 01:24] upgraded lib32-gtk2 (2.18.9-2 -> 2.20.0-2)
[2010-04-05 01:24] upgraded lib32-libgl (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-libxml2 (2.7.6-2 -> 2.7.7-1)
[2010-04-05 01:24] upgraded lib32-mesa (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:24] upgraded libepc (0.3.10-1 -> 0.3.11-1)
[2010-04-05 01:24] upgraded libfetch (2.30-1 -> 2.30-3)
[2010-04-05 01:24] upgraded libgail-gnome (1.20.1-1 -> 1.20.2-1)
[2010-04-05 01:24] upgraded libgdata (0.4.0-1 -> 0.6.4-1)
[2010-04-05 01:24] upgraded libgnomecups (0.2.3-6 -> 0.2.3-7)
[2010-04-05 01:24] upgraded libgnomeprint (2.18.6-2 -> 2.18.7-2)
[2010-04-05 01:24] upgraded libgnomeprintui (2.18.4-1 -> 2.18.5-1)
[2010-04-05 01:24] upgraded librpcsecgss (0.19-2 -> 0.19-3)
[2010-04-05 01:24] upgraded libssh (0.4.1-1 -> 0.4.1-3)
[2010-04-05 01:25] upgraded libxml++ (2.26.0-1 -> 2.30.0-1)
[2010-04-05 01:25] upgraded links (2.2-3 -> 2.2-4)
[2010-04-05 01:25] upgraded lynx (2.8.7-1 -> 2.8.7-2)
[2010-04-05 01:25] upgraded sbcl (1.0.35-1 -> 1.0.37-1)
[2010-04-05 01:25] upgraded maxima (5.20.1-2 -> 5.20.1-3)
[2010-04-05 01:25] upgraded mercurial (1.5-1 -> 1.5.1-1)
[2010-04-05 01:26] upgraded miro (2.5.4-4 -> 3.0-1)
[2010-04-05 01:26] upgraded mousetweaks (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nasm (2.07-1 -> 2.08.01-1)
[2010-04-05 01:26] upgraded nautilus-actions (1.12.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nautilus-open-terminal (0.18-1 -> 0.18-2)
[2010-04-05 01:26] upgraded nautilus-sendto (2.28.2-1 -> 2.28.4-1)
[2010-04-05 01:26] upgraded samba (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:26] upgraded nautilus-share (0.7.2-4 -> 0.7.2-5)
[2010-04-05 01:26] upgraded network-manager-applet (0.8-2 -> 0.8-3)
[2010-04-05 01:26] upgraded nfs-utils (1.2.2-1 -> 1.2.2-2)
[2010-04-05 01:26] upgraded nmap (5.21-1 -> 5.21-2)
[2010-04-05 01:26] upgraded ptlib (2.6.5-1 -> 2.6.5-2)
[2010-04-05 01:27] upgraded opal (3.6.6-1 -> 3.6.6-2)
[2010-04-05 01:27] upgraded openntpd (3.9p1-10 -> 3.9p1-11)
[2010-04-05 01:28] upgraded openoffice-base (3.2.0-1 -> 3.2.0-3)
[2010-04-05 01:28] upgraded openssh (5.4p1-3 -> 5.4p1-4)
[2010-04-05 01:28] upgraded openvpn (2.1.1-1 -> 2.1.1-2)
[2010-04-05 01:28] upgraded orca (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:28] upgraded perl-crypt-ssleay (0.57-3 -> 0.57-4)
[2010-04-05 01:28] upgraded perl-uri (1.52-1 -> 1.54-1)
[2010-04-05 01:28] upgraded php (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded php-apache (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded pixman (0.16.6-1 -> 0.18.0-1)
[2010-04-05 01:28] upgraded postfix (2.7.0-1 -> 2.7.0-2)
[2010-04-05 01:28] upgraded qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:28] upgraded qtscriptgenerator (0.1.0-3 -> 0.1.0-4)
[2010-04-05 01:29] upgraded rhythmbox (0.12.7-1 -> 0.12.8-1)
[2010-04-05 01:29] upgraded ruby (1.9.1_p378-1 -> 1.9.1_p378-2)
[2010-04-05 01:29] upgraded seahorse (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded seahorse-plugins (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded sound-juicer (2.28.1-2 -> 2.28.2-1)
[2010-04-05 01:29] upgraded subversion (1.6.9-2 -> 1.6.9-4)
[2010-04-05 01:29] upgraded syslog-ng (3.0.4-3 -> 3.0.4-4)
[2010-04-05 01:29] upgraded telepathy-glib (0.10.1-1 -> 0.10.2-1)
[2010-04-05 01:29] upgraded tomboy (1.1.0-1 -> 1.2.0-2)
[2010-04-05 01:29] upgraded totem (2.28.5-2 -> 2.30.0-1)
[2010-04-05 01:29] upgraded transmission-gtk (1.92-1 -> 1.92-2)
[2010-04-05 01:30] upgraded vala (0.7.10-1 -> 0.8.0-1)
[2010-04-05 01:30] upgraded vinagre (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:30] upgraded vino (2.28.1-3 -> 2.28.2-1)
[2010-04-05 01:30] upgraded virtuoso (6.1.0-1 -> 6.1.0-2)
[2010-04-05 01:30] upgraded wget (1.12-1 -> 1.12-2)
[2010-04-05 01:30] upgraded wpa_supplicant (0.6.10-1 -> 0.6.10-2)
[2010-04-05 01:30] upgraded xorg-server (1.7.6-2 -> 1.7.6-3)
[2010-04-05 01:30] upgraded xorg-xinit (1.2.0-1 -> 1.2.1-1)
[2010-04-05 01:30] upgraded xterm (255-1 -> 256-1)
[2010-04-05 09:21] upgraded fofix-svn (1991-1 -> 2038-1)
[2010-04-05 12:31] upgraded gloobus-preview-bzr (212-1 -> 214-1)
Last edited by valandil (2010-04-06 16:52:28)

Problem solved!
I remembered I once configured my keyboard with HAL and /etc/hal/fdi/policy/10-keymap.fdi was set to xkb.layout=ca and xkd.variant=fr. I changed the GDM layout to Canada and removed the xkb.variant=fr from the .fdi file and everything was fixed!

Cursor shows strange behaviour in 10.9.5

HI,
I'm using a 15" MBPr late 2013, i7, 16 GB RAM, 1 TB SSD, running on 10.9.5. Lately I registered a very strange behaviour of the cursor when using the built in trackpad. If hovering over one of the symbols in the bar at the upper right corner of the screen and then moving the cursor downward, the menu of the symbol on the right of the cursor pops up (not the one the cursor ist pointing on).
For example: the symbol for WiFi is located left from the one regulating the volume. When hovering over WiFi and moving downwards to activate/deactivate it, the volume-controle pops up ! If I want to use the WiFi, I have to hover over the symbol for bluetooth-connectivity instead....
Any idea whats happening here ?
Help is very much appreciated !
MIchael

OK, found the solution by myself. The reason seemed to be related to the resolution of the display. Changed it to another one (no matter which one), waited for the display to change and the changed the res back to optimal for display.
The cursor now works fine and exactly....
Really weird.

Importing BC4J project results in strange behaviours.

I found a strange behaviour in compiling BC4J projects wich imports another BC4J project.
Some of theese projects, when compiled, copy the xml/class tree of the imported project onto their directories some other don't.
The first behaviour is obvioulsy harmfull because of the number of copies it generates.
I didn't find any relevant difference between project wich behaves differently.
TIA
Tullio

Is there at least a description of the relate bug in order to understand when this problem comes out and than avoid it (if possible) ar watch it at least ?
Tks
Tullio

[solved] AMD Radeon - strange behaviour after mesa-update

Good afternoon Ladies and Gentlemen,
This is my first posting, I will try to give as much as detailed information refering to my problem as possible. Please be patient if I ask for solutions which for you all seem easy and logical, I am a Newbie.
The details: I am running a HP Pavilion 17 " AMD Quadcore laptop, 8gb Ram, Arch Linux 32bit Kernel 3.17.1 XFCE desktop with an AMD Radeon graphic card for about a few weeks now. Everything went fine so far, but last Saturday I did an update via pacman-Syu, the update included a mesa package. All went smooth as ever. Then after a reboot the XFCE desktop had stripes across the laptop screen, the mouse cursor had disappeared, also letters of the icon descriptions and the menus were missing, some strange "hieroglyphics" appeared instead of them. I wasn't able to downgrade the mesa-package as I nearly wasn't able to open the terminal because of the missing mouse cursor, then I managed somehow to get into the terminal and gave in the commands but the writing was incomplete and/or did not work because of these strange and missing letters.
No problem, I thought to myself, a fresh install will do the work, so I wipped my hard drive using Parted Magic, then I did a fresh Arch install (Netinstall), this time using LXDE instead of XFCE as my desktop environment. When I booted into the login screen first, it looked fine but after logging into the desktop all the stripes, the missing mouse cursor and the strange letters appeared again. So is there any solution to that strange behaviour ? Before the Saturday-update everything worked without any problems for weeks. BTW other OS work without these problems, I tried Macpup just for fun, no messing-up with my Radeon graphics card happened.
Sorry for my piss poor English I am Austrian. Sorry for eventually causing any inconvenience asking this question. Regards, Fladi.
Last edited by fladi (2014-11-04 05:01:28)

fafik1234 wrote:
I have the same problem, free drivers, xfce4, procesor AMD5350(Kabini), vga radeon R3 (8400)
downgrade linux kernel to linux-3.16.4
download: http://seblu.net/a/arm/packages/l/linux … pkg.tar.xz
pacma -U linux-3.16.4-1-i686.pkg.tar.xz
edit /etc/pacman.conf
IgnorePkg = linux linux-headers
screenshot
linux 3.17 xfce http://pics.tinypic.pl/i/00592/ek3z3ip81ky2.png
linux 3.17 compiz http://pics.tinypic.pl/i/00592/bddprwn4tey8.png
linux 3.16 compiz http://pics.tinypic.pl/i/00592/ja5ma8c7rdgl.png
On a laptop, free drivers, linux 3.17.1-pae, openbox, procesor core i5, vga integrated card - everything OK
The screenshots you posted match exactly to my problem ! Are you really sure the bug is coming from Kernel 3.17 ? I had this kernel running for about a week without any problems, the problems came when updating mesa.

SOLVED:Strange behaviour:request shows results in Answers not in dashboard

Similar Messages

Maybe you are looking for