[SOLVED]stucked while creating templaet

hi frs,
i need to create a templaet like this
employee number Fieldwork1 fieldwork2 fieldwork3
11111111111111 20 30 10
22222222222222 30 40 5
fieldwork1,fieldwork2,fieldwork3 are attribute7 shown in XML file below
how to make it.
help pls
Regards
Rajesh
Message was edited by:
Rajesh.mani
Message was edited by:
Rajesh.mani

Hi,
You have to write an user exit or BADI for the PO.
Regards,
Chaitanya

Similar Messages

HELP!! - Element 9 - Program always get stuck while creating thumbmail :(

Just bought Photoshop Element 9.0 as I wanted something better than Picasa.
1. I installed it, created a catalog
2. Each time I try to import pictures into this catalog, it does read the 50000 pictures I have properly but the thumbmail never finishes. I looked at the size of the catalog thumbmail and it stopped growing so it seems really stuck.
I tried to re-create the catablog, create smaller catalogs (the real small ones do work!) but as soon as more than 25000+ pictures need to be important, the thumbmail issue re-appear.... So frustrating.
Any clue?
I am using Win 7 ultimate, plenty of HD, Intel 4 core processor, 4 GB DDR3 RAM
Thanks,
Patrick

I don't have specific experiance with the issue you face but I do have a couple of recommendations:
1) Start with a new catalog
2) Turn all auto-analysis options off, exit, and restart the organizer
3) Try to import again
If this doesn't work, do the above steps but import in batches.
Additionally, you could try to update the thumbnails manually after the organizer seems to have stopped:
1) Exit the organizer and restart after it seems to be stuck.
2) Select some of the photos which do not have the thumbnail updated.
3) Right click. There should be an option to update thumbnails. Select this and see what happens.
I don't know if any of the above steps will help but I do know that auto-analysis will also stop after processing a few thousand photos.

IMovie gets stuck while creating thumbnails for iPhoto Videos

Hello,
I've just got iLife 09. When I opened iMovie (with all the latest patches) it asked me if I want to create iPhoto thumbnaisl. I said yes and iMovie started to do something. At a certrain point the progress bar stopped moving and didn't move until I killed iMovie. If I do the same now, not even the progress bar show up and "remaining time" keeps empty.
Can anyone tell me how to convince iMovie to create those thumbnails?
My iPhoto contains about 6000 images and 42 iPhone movies.
Thanks
Bernd

Give this sequence a try, it may help you isolate your issue:
_*RUN SOFTWARE UPDATE*_
Before starting the steps below, make sure you are running the latest software update.
_*REMOVE 3RD PARTY PLUGINS*_
Some 3rd party plugins may be interfering with iMovie.
Here are the only 2 files IN MY QUICKTIME FOLDER:
. . . . . . . . . . . . / Library / QuickTime / AppleIntermediateCodec.component
. . . . . . . . . . . . / Library / QuickTime / AppleMPEG2Codec.component
If you do have more than the 2 files listed above, temporarily move the "NON APPLE" components outside of the QuickTime folder, Reboot the Mac.
_*TEMPORARILY CREATE A NEW IPHOTO LIBRARY*_
_ Quit all your Apps
_ Hold-down the [Option] key and click on the iPhoto icon
_ Click "Create New.." and enter a new iPhoto Library name -- I used "Empty_Library"
_ Click "Save"
_ Quit iPhoto
_*FRESH LAUNCH OF IMOVIE*_
_ Delete the iMovie Plist: /Users/ {your username} /Library/Preferences/com.apple.iMovie8.plist
_ Launch iMovie
Does iMovie starts-up properly without your old iPhoto Library?
If so, your old iPhoto Library may contain a video file / files that are not compatible with iMovie.
_*TRY RE-LOADING YOUR OLD IPHOTO LIBRARY*_
_ Quit all your Apps
_ Hold-down the [Option] key and click on the iPhoto icon
_ Select your old iPhoto Library from the list
_ Click "Choose"
_ Quit iPhoto
_ Launch iMovie
Does iMovie starts-up properly with your old iPhoto Library?
If not, try removing the bad video file / files from your iPhoto Library (if you know which one it is).
Just make sure to back-up those files before removing them from your iPhoto Library.
Let me know if that helps.

How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

How do I solve the problem that states: An error occurred while creating the backup folder" on Time Machine

Please carefully read and also book mark:
Time Machine Troubleshooting
Time Machine FAQs

Problem in Function while creating dependency not getting solved

Hi All,
I am not getting any solution even after debuging it many times,
This is second time I am posting same problem , Please help me out if possible
I am working on a Program in which I have to create Class , local and global dependency -
For class createion i am using
BAPI_CLASS_CREATE
For local dependency i m using
CAMA_CLASS_MAINTAIN_DEP
For Global dependency i am using
CAMA_CLASS_ALLOCAT_GLOB_DEP
Now my problem is that I am able to create Class and only 1 of the dependency either local or global whihever function I am calling first
But while debugging program I am able to create Class as well as both dependencies successfully
Please can any one tell while this is runing successfully only at the time of debugging
Code -
have used -
CALL FUNCTION 'BAPI_CLASS_CREATE'
EXPORTING
CLASSNUMNEW = TCLASS-CLASS
CLASSTYPENEW = TEXP1-KLART
CLASSBASICDATA = CLASSBASICDATA
CHANGENUMBER = SAENNR
TABLES
CLASSDESCRIPTIONS = CLASSDESCRIPTIONS
CLASSLONGTEXTS = CLASSLONGTEXTS
CLASSCHARACTERISTICS = CLASSCHARACTERISTICS
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = TRET2.
CALL FUNCTION 'CAMA_CLASS_ALLOCAT_GLOB_DEP'
EXPORTING
CHANGE_NO = SAENNR
KEY_DATE = SY-DATUM
TABLES
CLASS_DEP_ASSIGN = T_GLBDEP
EXCEPTIONS
ERROR = 1
WARNING = 2
OTHERS = 3.
CALL FUNCTION 'CAMA_CLASS_MAINTAIN_DEP'
EXPORTING
CLASS = TCLASS-CLASS
CLASS_TYPE = SKLART
DEPENDENCY_DATA = T_DEPDATA
CHANGE_NO = SAENNR
KEY_DATE = SY-DATUM
TABLES
SOURCE = TSOURCE
EXCEPTIONS
ERROR = 1
WARNING = 2.
I have no problem in creating Class using Bapi ,
Problem I am facing here in creating Local and global dependency together which i am able to create in debugging mode only otherwise either Local or global whichever function i am using first
Regards
Preeti

duplicate post locked
Re: Problem in Function while creating dependency

HT3275 The error message I get with Time Machine is 'Unable to complete backup. An error occurred while creating the backup folder.' Any idea how I solve this problem?

I am a little perplexed. The Time Machine does seem to be backing up my data but I continually get the following message displayed on my screen 'Unable to complete backup. An error occurred while creating the backup folder.' I am using a WD My Passport for Mac portable hard disk drive.

Hi Peter,
http://pondini.org/TM/C10.html

Urgent Error while creating UD Connect datasource

Hi Everyone,
I'm getting an error when trying to select the UD Connect Source Object.
I get error:
Errors occurred during extraction of existing UD Connect source objects: UDCADAPTERROR::RSSDK|100|Cannot open the connectio
Nº mensagem RSDS_ACCESS031.
If there is any good documnet on this issue please mail me to [email protected]
I would apreciate if anyone can help me in this issue. I Gurantee that I will appreciate it with points.
Best Regards
Baba.

Hi Michael,
Thanks a lot for your reply but I have already seen this link. I am working on UD connect for the first time but i have experience on DB connect. In DB connect we need to use same user name and pswd (used to access DB) for BI also while creating datasource is this the same concept with UD connect?. I have seen lots of posts on this issue in SDN but there are no replies. I don't know whether they solved or still they have issues? would you please send me a document related to this issue as in most of the posts they talk about a document on this issue to ID [email protected]
I have tested RFC connection in SM59 and also RFC destination name its in capital letters. Source system connection is also ok. while creating datasource in extraction tab i got stucked as I am unable to select UD source objects. If you can elaborate more on this thats really helpful, I apprecaite your time and help. I will definetely assign full points if it shows me some way to resolve this.
Regards
Satish Arra.

Error, while creating a control file

Hi All,
DB Version :- SQL*Plus: Release 10.2.0.3.0
I am in process of carrying out full db refresh from cold backup. I came across with following, while creating a contrl file. strange to see two dbf's has same file_id. Please help me to solve this issue.
==
SQL> @a.sql
CREATE CONTROLFILE SET DATABASE LNRATU2 RESETLOGS NOARCHIVELOG
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 6: '/data/oracle/LNRATU2/data02/LNRATU2_audits.dbf'
ORA-01110: data file 6: '/data/oracle/LNRATU2/data01/LNRATU2_audits_01.dbf'
===
hare krishna

Thanks.. Find below the a.sql contents.
CREATE CONTROLFILE SET DATABASE LNRATU2 RESETLOGS NOARCHIVELOG
MAXLOGFILES 5
MAXLOGMEMBERS 3
MAXDATAFILES 300
MAXINSTANCES 1
MAXLOGHISTORY 58720
LOGFILE
GROUP 2 (
'/data/oracle/LNRATU2/redo01/LNRATU2_redo02a.dbf',
'/data/oracle/LNRATU2/redo02/LNRATU2_redo02b.dbf'
) SIZE 500M,
GROUP 3 (
'/data/oracle/LNRATU2/redo01/LNRATU2_redo03a.dbf',
'/data/oracle/LNRATU2/redo02/LNRATU2_redo03b.dbf'
) SIZE 500M
DATAFILE
'/data/oracle/LNRATU2/data01/LNRATU2_audits_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_02.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_03.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_04.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_05.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_06.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_07.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_08.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_09.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_10.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_11.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_12.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_13.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_14.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_15.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_16.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_17.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_18.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_19.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_20.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_21.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_22.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_23.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_24.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_25.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_26.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_27.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_28.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_29.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_DATA01_30.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_02.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_03.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_04.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_05.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_06.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_07.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_08.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_09.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_10.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_11.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_12.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_13.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_14.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_15.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_16.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_INDX01_19.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_MCINFO_DATA01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_MCINFO_INDX01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_MCINFO_LOB01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_quest_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_RATEOD_LOB01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_RMS_DATA01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_RMS_DATA01_02.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_RMS_INDX01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_RMS_INDX01_02.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_RMS_INDX01_03.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_RMS_LOB01_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_sysaux_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_system01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_tools_01.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_UNDOTBS101.dbf',
'/data/oracle/LNRATU2/data01/LNRATU2_users_01.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_audits.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_31.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_32.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_33.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_34.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_35.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_36.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_37.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_38.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_39.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_40.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_DATA01_41.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_17.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_18.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_20.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_21.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_22.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_23.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_24.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_25.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_26.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_27.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_28.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_29.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_30.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_31.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_32.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_33.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_34.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_35.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_36.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_37.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_INDX01_38.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_quest_01.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RATEOD_LOB01_02.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RMS_DATA01_03.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RMS_DATA01_04.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RMS_DATA01_05.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_04.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_05.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_06.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_RMS_INDX01_07.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_statpack_01.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_sysaux_01.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_system01.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_tools_01.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_UNDOTBS1_02.dbf',
'/data/oracle/LNRATU2/data02/LNRATU2_users_01.dbf'
CHARACTER SET WE8ISO8859P1
hare krishna

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while creating PO in operation subcontracting

I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error

Hi Sam,
please check ,
Assign a recursive BOM for the material for which you want to create the purchase order .ie. create a BOM of mat say X having a component X and marking the indicator recursive ticked.
Please create the BOM which is valid much before the date of creating a purchase requisition .
And proceed for the creation of subcontract purchase requisition.
Please Revert back, if the problem is solved.
OMKAR

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Error while creating 2nd Material Receipt after reversal of 1st MR

Dear,
Facing an error while creating Material Receipt.
The gate entry of this material is 123456789.
The 1st MR was created on 10/02/2011 & no. was 12345 with Location ABC via Z T-code.
Under Quality this product was Rejected with Location XYZ.
Due to Material was Rejected in Quality this MR 12345 was reversed through MB01 which produced a Reversal number 67890.
Now the material is again on its original Location ABC.
Now when the user is again creating an MR on 17/03/2011 of this material present at ABC location via using Z T-code it is producing an error stating that M/R already processed against 123456789 gate entry.
We have done these several cases before also and there was no error shown when we created the 2nd MR for the same material after its reversal has been made.

Dear,
Problem solved.
The problem was in PO.
The person had unchecked the GR-basediv which caused the real trouble. The MR number was not appearing in MB03 & material was rejected in the QA11 so it was reversed through MB01.
When again the MR was being punched then it was stating that the "MR already processed for the Gate Entry."
PO was changed, Bill No. was changed by adding "A" & later deleting this "A" from Table level.

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

Error while creating Maintenance Plan

Hello,
When I am creating a Maint Plan, I am getting error
No packages have yet been assigned to the maintenance item 143
Message no. IP364
How do I solve this??
Narendra

Hi Narendra
While creating Task List, for all operations u have to maintain the maintenance packages. According to the Maint. Pack only it will schedule the operations and release the order for the particulaer interval...
under operation tab
left side bottom conner... click it and you cna assign...
For Creating maintenance package... TCODE : IP11
- Pithan

Error while creating Inspection plan

Hi,
While creating inspection plan in QP01, system is showing error "Material type ZROH is not defined for task list type Q''
Please help me to solve the error.
Thanks
Prasant

Hi,
This is due to the configuration error,
Just use T.Code OP50
Create an entry for task list type "Q" with material type "ZROH" and save,
Then try creating a Quality Inspection Plan, it will work
Regards
Merwyn

[SOLVED]stucked while creating templaet

Similar Messages

Maybe you are looking for