[SOLVED] surround51 problem with ALSA

Hi there,
I have some trouble getting 5.1 audio working in Arch.
In Ubuntu I used to use the instructions here to make my card output surround sound (which means that the back speakers play the back sounds in an AC3 audio stream etc).
My problem in Arch seems to be that the output "device" ALSA uses for 5.1 output does not work. For example when I type:
[afonic@afonic-arch ~]$ speaker-test -Dplug:surround51 -c6 -l1 -twav
speaker-test 1.0.14
Playback device is plug:surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
WAV file(s)
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
while it should output:
[afonic@afonic-arch ~]$ speaker-test -c6 -l1 -twav
speaker-test 1.0.14
Playback device is default
Stream parameters are 48000Hz, S16_LE, 6 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
4 - Center
1 - Front Right
In Ubuntu this results in playing just from 4 speakers, until I do the hack mentioned above when all 6 work. Of course I cannot do this hack without surround51.
I've checked my settings and I have the latest version of alsa-libs.
Here are some useful outputs:
[afonic@afonic-arch ~]$ lsmod|grep '^snd'
snd_seq_oss 29312 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_intel8x0 28700 3
snd_ac97_codec 95652 1 snd_intel8x0
snd_pcm_oss 37024 0
snd_pcm 69124 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 19332 3 snd_seq,snd_pcm
snd_page_alloc 7816 2 snd_intel8x0,snd_pcm
snd_mixer_oss 14592 1 snd_pcm_oss
snd 45028 13 snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
[afonic@afonic-arch ~]$ aplay -L
default:CARD=CK804
NVidia CK804, NVidia CK804
Default Audio Device
front:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
Front speakers
surround40:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
4.0 Surround output to Front and Rear speakers
surround41:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=CK804,DEV=0
NVidia CK804, NVidia CK804
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
null
Discard all samples (playback) or generate zero samples (capture)
Any ideas?
Last edited by afonic (2007-09-13 08:13:02)

Solved.
Some Gnome setting was the problem (System -> Prefs -> Sound > Disable ESD).
Now not only it works but I have native 5.1 (!) without the need to use that 51to40 hack!

Similar Messages

[SOLVED] Audio problems with alsa!

I have an Asus z87-k and i conected a soundbox on the audio card, in the green conector (that is the out) and i cant have any sound playing.
An screenshot from my alsamixer https://imagizer.imageshack.us/v2/1358x … 6/7lsr.png
I checked everithing twice and anithing solved, i`ll be online to give any other information!
Last edited by henriqueleng (2014-02-22 04:31:18)

Lets continue the post!
I don't have any file in /etc/asound.conf., and i dont know where it can be!
I'm trying to configure alsa without any other server (pulseaudio, jack,...).
My lspci output have two audio devices, i think that is one of hdmi:
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
---- 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
----- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Z87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 11)
04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
I read in another forum that is because my hdmi as set as default. In Arch wiki, they say that i need to edit alsa-base.conf archive, but my pc dont have it too. I too read that how im using two devices that are using same module, edit alsa-base.conf dont will help.
Aplay -l Show me
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
Please help!

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service Apple Mobile Device failed to start. Verify that you have sufficent priveleges to start system services.

I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66

Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy

HT4623 How can i solve installation problem with iOS 6.

How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

Easier and better ways to solve current problems with Acrobat?

Is there no better and easier way to solve the problems (installation, re-installing and crashing) with Acrobat? I really think that the ball is in Acrobat's corner right now, because I should not (for example) need to deactivate and re-activate my subscription in order to get AcrobatPro XI to work on my computer, let alone deinstalling an older version that (for now) does work, risking that in the end neither of them work. I need the (great) AdobeCloud applications to do my work as a freelancer, and I really cannot afford this kind of trouble with my applications, nore loose time repairing them. These are difficult times as it is.
Regards,
Marc

Sorry, I can't. When I installed it there was no message that said I had to deinstall the old version first, and with other Adobe CC applications there had been no trouble at all, so I installed it with The previous version still on my computer.
After installing, neither of them would start up properly, so I deinstalled version XI, after which the old version worked again, but my Adobe Application Manager does not let me download the XI version a second time, so I cannot try again.
Regards,
Marc
Op 7 dec. 2012 om 00:41 heeft David Kastendick <[email protected]> het volgende geschreven:
Re: Easier and better ways to solve current problems with Acrobat?
created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
The description of the issue you originally presented isn't something that I've seen happen to Acrobat when installed as a part of Creative Cloud.
Could you provide a specific description of the behavior that occurs when you launch Acrobat XI now?
Thanks,
David
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4902597#4902597
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4902597#4902597
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4902597#4902597. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

help solve the problem, with the lifting of purchasing and payment card is locked, and now I can not pay for her purchases in the app store

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Same here. Everything was fine running on ios 6.0, I don't know what possessed me to upgrade! I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network. I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy! This is clearly a faulty software update and need fixing pronto! I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem. When will this be realeased Apple?! It's hardly fit for purpose when I can't make calls or surf the internet.

How to reset the BIOS to solve a problem with DVD burner on Satellite P100

Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.

Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye

Problem with Alsa

Hello,
I have got a problem with my asoundrc.. The problem is the lowpass filter with the subwoofer. It gets all frequencies. I've tried different soulutions from different forums witth different asoundrc. config codes. But nothing of them worked. Another hint is the thing, that the upmix from a stereo source to 5.1 worked out of the box with my soundcard. And when I now try to fill the asoundrc. there is no change or if it's the default device sometimes an error message. But it all seems to be unchanged when I edit it.
Thank you!
OS: Arch Linux 64 bit / KDE (removed gnome again)
Soundcard: Creative Audigy 2 / Alsa Driver
One source of an asound.conf:
http://alsa.opensrc.org/Low-pass_filter … 28HOWTO%29

Okay, Unless I have the asoundrc empty there is upmixed 5.1 sound "out of the box". But I have tried this configuration
pcm.upmix_20to51 {
type plug
slave.pcm lowpass_21to21
slave.channels 3
ttable {
0.0 1 # left channel
1.1 1 # right channel
0.2 0.5 # mix left and right ...
1.2 0.5 # ... channel for subwoofer
pcm.lowpass_21to21 {
type ladspa
slave.pcm upmix_21to51
path "/usr/lib/ladspa"
channels 3
plugins {
0 {
id 1098 # Identity (Audio) (1098/identity_audio)
policy duplicate
input.bindings.0 "Input";
output.bindings.0 "Output";
1 {
id 1672 # 4 Pole Low-Pass Filter with Resonance (FCRCIA) (1672/lp4pole_fcrcia_oa)
policy none
input.bindings.2 "Input";
output.bindings.2 "Output";
input {
controls [ 300 2 ]
pcm.upmix_21to51 {
type plug
slave.pcm surround51
slave.channels 6
ttable {
0.0 1 # front left
1.1 1 # front right
0.2 1 # rear left
1.3 1 # rear right
0.4 0.5 # center
1.4 0.5 # center
2.5 1 # subwoofer
But still no lowpass filter
I also tried this configuration:
# ALSA configuration for use with surround speaker sets.
# Provides on-demand upmixing via plugin plus
# lowpass filtering/crossover capability plus
# software-mixing/dmix support.
# Possibly useful sources include:
# https://wiki.archlinux.org/index.php/Alsa
# http://www.volkerschatz.com/noise/alsa.html
# http://www.sabi.co.uk/Notes/linuxSoundALSA.html
# http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html
# For those who understand German: http://wiki.ubuntuusers.de/.asoundrc
# Change default samplerate conversion algorithm to
# SRC_SINC_MEDIUM_QUALITY. Requires package "libsamplerate".
# See http://www.mega-nerd.com/SRC/api_misc.html.
# Other resampling algorithms are available.
defaults.pcm.rate_converter "samplerate_medium"
# The first ALSA device of the first soundcard
# (here: Analog Multichannel Ouput).
# See /proc/asound and "aplay -l".
pcm.sndcard {
type hw
card 0
device 0
# Dmix software mixing device.
# Takes multiple input streams, resamples them to target
# rate (here: 48kHz) and sends it to the sound card.
pcm.dmix51 {
type dmix
ipc_key 1024
slave {
pcm "sndcard"
channels 6
rate 48000
period_time 0 # Fixes audio crackling/stutter
period_size 1024 # with libsamplerate and chromium.
buffer_time 0 # Not all options may be
buffer_size 4096 # absolutely necessary.
# Convert float data from "lowpass51" to integer data
# and pass it on to the dmix device.
pcm.lowpass_float {
type lfloat
slave {
pcm "dmix51"
format "S16_LE"
# Lowpass filter.
# Requires "ladspa" for plugin support,
# "cmt" for identity_audio plugin and
# "swh-plugins" for lpf plugin.
# See http://www.ladspa.org/.
pcm.lowpass51 {
type ladspa
slave.pcm "lowpass_float"
path "/usr/lib/ladspa"
plugins {
# Copies all audio of all channels to other plugins.
# If no other plugin handles a channel, it comes out unchanged.
0 {
id 1098 # Identity (Audio) (1098/identity_audio)
policy duplicate
input.bindings.0 "Input";
output.bindings.0 "Output";
# Actual low-pass filter functionality.
# Operate on channel 5 (LFE) and remove
# frequencies higher than 120Hz.
1 {
id 1051 # Low Pass Filter (One Pole) (1051/lpf)
policy none
input.bindings.5 "Input";
output.bindings.5 "Output";
input {
controls [ 120 ]
# Automatic upmixing. Requires package "alsa-plugins".
pcm.upmix51 {
type upmix
# Simply "lowpass51" won't work.
# "plug:..." specifies a plug device like
# the long form for the default device below
# and takes care of channel/format conversions
# automatically.
slave.pcm "plug:lowpass51"
# Specifying the number of channels to upmix to here is mandatory.
channels 6
# Default device to be used by all applications playing all sorts of sources.
# There's automatic upmixing for 2.0 sources and native playback of 5.1 sources.
# (possibly others as supported by the upmix plugin)
pcm.!default {
type plug
slave.pcm "upmix51"
But I think the problem is an other:
When I use this simple configuration, the lowpass filter works:
pcm.lowpass {
type ladspa
slave.pcm "plughw:0"
path "/usr/lib/ladspa"
plugins [ {
label lpf
input {
controls [ 150 ]
pcm.test {
type plug
slave.pcm "lowpass"
The problem is, that it's working on all channels
Last edited by Destroyer4000 (2013-11-10 10:51:07)

[SOLVED] Several problems with PulseAudio under Xfce4

So, yesterday I sat down to set up pulseaudio on my machine (I want to try and use it for my 'networked-audio system' of the future).
I was aware of the fact that pulseaudio does have several problems. particularly with ALSA-compatibility, but I was ready to give it a shot anyway and hope for the best.
Of course that did not happen...
I installed everything (including packages for backward compatibility with ALSA) and while sound still works (what a relief), I have several problems now:
1. Pulseaudio does NOT save it's volume levels - Volume levels for Pulseaudio are gone after next reboot, I was trying to look into this, but found no workable solution.
2. Strange behaviour of apps when changing volume - This is REALLY annoying.
When I am in a music app for example (e.g. Banshee) and am trying to increase/decrease volume, the current sound (song) will 'mute' when I am moving the slider and only 'resume' after I release it.
Any ideas are much appreciated,
Thanks,
SOLVED: It seems that all my alsa channels were automatically muted when pulseaudio was first enabled.
Strange, Is this because pulseaudio wants you not to use alsa or something? :-)
Last edited by MatejLach (2012-09-02 19:30:45)

vacant wrote:
I'm using just alsa now but when I used pulseaudio I used "pacmd" to set suitable volumes. Something like
pacmd set-default-volume (and then volumes in the range 0-65000?)
anyway, "pacmd info" will have the correct command.
I was not aware of this, very useful - Thank you.
Last edited by MatejLach (2012-09-02 19:31:53)

[SOLVED] Low sound with ALSA

Hi! I'm using alsa on a laptop with master, speaker and PCM at 100%, and I still can't get an output as loud as I'd like.
On ubuntu with pulseaudio, I had the option of setting the volume to 120% on the sound preferences menu, which made a desirable volume level for me. Is there an equivalent thing in arch? Is this like setting PCM to something higher than 0b?
Cheers!
Last edited by orlox (2010-08-14 20:09:46)

Just installed pulseaudio. Not really a solution to the name of this thread, since I didn't get a loud volume with ALSA, but it solves my problem of having low volume on my PC

[SOLVED] Installation problem with pacstrap

Hi guys, I am a new user of Arch Linux.
I wanted to try this operating system then I decided to install that on my Asus F200MA. Unfortunately, when I try to install ArchLinux, I get an error while downloading the base packages with pacstrap.
My HDD is made by 3 partitions:
/dev/sda1 - 51200 MB: This is the root partition
/dev/sda2 - 411690 MB: This is the home partition
/dev/sda3 - 4096 MB: This is the swap partition
After mounting these partitions, after using the pacstrap command and after the end of the download process, I get a few error messages:
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
I really can't understand the reason of these errors, how can I solve the problem?
For formatting and mounting the partitions I used these commands:
# mkfs.ext4 /dev/sda1
# mkfs.ext4 /dev/sda2
# mkswap /dev/sda3
# swapon /dev/sda3
# mount /dev/sda1 /mnt
# mkdir /mnt/home
# mount /dev/sda2 /mnt/home
and then I used this command:
pacstrap /mnt base base-devel
Photo of the errors: http://i.imgur.com/4BRhlC7.jpg
P.S.: Can you also explain me the reason of the signature's errors?
Thanks for all
Last edited by xRedFox (2015-04-10 21:59:20)

Do you use the most recent installation disc image?

When is apple going to solve the problems with the 4S battery???

I bought a new iPhone 4S last week and I have some many problems with the battery the first day, but I thought it must be something normal because of the first time but the few next days it was the same. On Thursday morning I received the iOS 5.0.1 update and I thought it was going to solve the problem but it wasn't!! So I called Apple and they told me I should restore my phone and after that it was supossed to work properly, but it didn't so they told me I should go to an Aple Store and they would change my phone but... it's supossed that all 4S have the same problem so... I would have a new iPhone one week later but with the same problem?? If Apple solve the problem in days, weeks or even months are they going to give us the new (working-properly) phone instead our old one??
Thank you very much!!

Some Users have reported that a Restore has Resolved Issues...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

[SOLVED]No Sound with ALSA - Intel Corporation 82801G HD Audio

Hey all,
I've succesfully installed Arch Linux. My past two attempts have met with failure, all because of my own failure to read and follow directions correctly. This time everything is installed correctly. I am running Kdemod3 on my laptop with Arch and everything works great. I LOVE Pacman and the simplicity of Arch's configuration files. It's super fast and all together simple. My only remaining problem is this:
My sound with ALSA is not functioning. I followed the installation instructions at the arch wiki and after unmuting all of my channels I still would not get any sound. My sound module is snd_hda_intel and it is detected, loaded and the whole nine yards (as far as I can tell). My user is a member of the 'audio' user group also. I looked at the troubleshooting tips on the bottom of the Wiki but decided not to try them as they do not seem to pertain to my card (snd_hda_intel) but I will try them if anyone would like me to.
If anyone has any ideas, they'd be greatly appreciated!:D Anything I can provide that you need I will be more than willing to provide.
Thanks for such a great distribution,
Dan
Last edited by JazzDan (2008-06-29 05:06:35)

Problem resolved. I ran alsaconf, selected my soundcard, and everything was working from there out. Thanks MisfitI38 on the IRC!!!

[SOLVED] surround51 problem with ALSA

Similar Messages

Maybe you are looking for