[SOLVED] Suspend to ram / disk not working in newer kernels

Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)

Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51)

Similar Messages

[SOLVED} Suspend to ram does not work (with sleep, s2ram, pm-utils)

Hi.
I would like to ask for one thing: i can't suspend to ram or resume from suspend to ram.
I treid to check over www in order to find some help, some solutions, and how to fix that. Unfortunately, i found these:
https://forums.opensuse.org/showthread. … 13-2/page2
https://bugzilla.opensuse.org/show_bug.cgi?id=913105
https://forums.opensuse.org/showthread. … S-13-1-x64
Bug 91921 - WD 2TB Caviar black causes hard lock on resume S2RAM
https://bugzilla.kernel.org/show_bug.cgi?id=91921
In fact, when i was researching of this problem i wanted to check if my graphic card and memory are failing so a did few changes (removed memory stick and so one) but in doing this i removed almost all of my hard disk drives because i didn't want to hurt them with many reboots or resets.
What did i find? It is strange, kernel version is not important because i checked most of them.
I removed 2x2TB Seagate F14 series along with 4x3TB WD Green. Then i checked s2ram, it went to suspend, and resumes correctly. Everything works. I put it to sleep with s2ram -f -a 1. Works
I attached my 4x3TB WD Green drives. I put computer to sleep with s2ram...it causes hard lock, black screen, i could do only poweroff by powerbutton. s2ram -f -a 1 causes freez. Sometimes, but not constantly, s2ram -f -a 3 -p is being able to suspend...(mostly it does a freez, hard lock computer) but sometimes it is able to put it to a sleep, but resume just freezes everyting - no blinking cursor, no blinking num lock led and so on.
I know that you would suggest me to check logs - this is the main problem. Logs for pm-suspend works when i suspend or resume without WD drives attached. When i have them connected, i'm not able to check pm-logs because computer hangs, freezes and logs are not being stored/writed to pm-suspend.log and pm-powersave.log.
Could somebody help? Point me to a solution? I can't check logs because there are not any when freezing occurs. I checked openSuse thread and many others and for other systems there were some kernel fixex, patches.
They wrote that WD blacks are at fault because they don't have APM. Well, in fact my WD Green have APM with very aggresive factory settings: they park heads over 8 seconds not being used. I disabled it in firmware but disabling it is not the point and not the problem. People have the same problem even with APM and parking heads on other WD drives, i found it that some have it with WD Red's drives and even with very old 320GB WD Blue series - what is more funny, i have 640GB AAKS blue from WD and with this drive i can suspend or resume - APM on this drive is also unavilable, like in Green series because i changed it with wdidle with prebootable cd. I can't supend or resume with 3TB WD Greens.
BTW - suspend to disk, with pm-utils and uswsusp works ok, in 100% every time. (i had to add "shutdown method = shutdown" to /etc/suspend.conf from uswsusp package).
On Windows machine it works. Can suspend, can resume, can hibernate.
Last edited by firekage (2015-03-07 03:27:28)

Hm, sometimes i found myself astonished because some things just does not work at all on one machine, while the other one has no problem at all. I was trying to find why suspend to ram won't work at all...and while i was searching i found one topic that was leading to upower dbus. Similar problem with upower i found, by coincidence, on Manjaro forum.
dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
this command above returns all the time:
Error org.freedesktop.DBus.Error.UnknownMethod: Method "Suspend" with signature "" on interface "org.freedesktop.UPower" doesn't exist
I tried this:
sudo systemctl enable acpid.service
sudo systemctl --system daemon-reload
sudo systemctl restart systemd-logind
As soon as i enabled and started acpid.service...my supend to ram, from kde, works like a charm, without graphic problem, or freezing.
There is few question: why on my desktop suspend doesen't work out of the box, when even archwiki says it should? Why on my netbook machine (Acer AOD270) that has the same package installed it works out of the box? Why on my desktop machine acpid.service was not enabled, was not started and was not running while on the notebook it does?
Anyway...i fixed it by a big coincidence because on Fedora forum somebody has problem with suspend to ram with nvidia GTX750 and this card was new like my card (GTX660). He posted the same problem with upower that i posted in quotes and because of this i found another thing on Manjaro forum and that was it!
BTW - this problem, i now think, is not related to my WD drives because it works with them. I think that there was another one ugly thing that broke my suspend to ram ability - bios of my motherboard (so called uefi bios with support for old one) has no option for S1-S5 stated (like the previous motherboards had) and only have ASPM...and ASPM is in my opinion broken but i will try to veryfi it one again later.
Last edited by firekage (2015-03-07 03:29:20)

Suspend to ram/disk stopped working overnight

My suspend to ram/disk used to work fine, but overnight, it stopped. It is not an update issue since, I was able to suspend after the last update. I decided to update today hoping that it is going to solve the problem, but the problem persist.
Here is what happens:
$ sudo pm-suspend
or
$ sudo pm-hibernate
The computer suspends faster than usual, as if it does not take the time to complete the suspend procedure. When I turn the computer on, it starts to boot instead of resuming from suspend. In the case of hibernate, this is clearly obvious. Normally it is suppose to take 10-30 s. to save the memory data to the swap, but this time the computer shuts fast (1-2s.), and I doubt that all the data is saved to swap.
Here are the logs for each case (/var/log/pm-suspend.log):
suspend to ram:
Initial commandline parameters:
Sat Aug 25 23:16:03 EDT 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux gateway 3.4.9-1-ARCH #1 SMP PREEMPT Wed Aug 15 18:59:31 CEST 2012 x86_64 GNU/Linux
Module Size Used by
xt_recent 7901 3
xt_tcpudp 2471 51
ip6table_mangle 1684 0
ipt_MASQUERADE 1738 1
nf_nat_ftp 1668 0
iptable_nat 4024 1
nf_nat 15100 3 nf_nat_ftp,ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 6871 20 nf_nat,iptable_nat
nf_defrag_ipv4 1339 1 nf_conntrack_ipv4
xt_TCPMSS 3439 5
xt_LOG 11943 48
ipt_REJECT 2281 0
iptable_mangle 1584 0
xt_multiport 1758 0
xt_state 1295 17
xt_limit 2041 51
xt_conntrack 3329 0
nf_conntrack_ftp 6261 1 nf_nat_ftp
nf_conntrack 61584 8 nf_nat_ftp,ipt_MASQUERADE,nf_nat,xt_state,xt_conntrack,nf_conntrack_ftp,iptable_nat,nf_conntrack_ipv4
ip6table_filter 1396 1
ip6_tables 18198 2 ip6table_filter,ip6table_mangle
iptable_filter 1456 1
ip_tables 16946 3 iptable_filter,iptable_mangle,iptable_nat
x_tables 16954 17 ip6table_filter,ip6table_mangle,xt_recent,ip_tables,xt_tcpudp,ipt_MASQUERADE,xt_limit,xt_state,xt_conntrack,xt_LOG,xt_multiport,iptable_filter,xt_TCPMSS,ipt_REJECT,iptable_mangle,ip6_tables,iptable_nat
adt7475 20329 0
hwmon_vid 3196 1 adt7475
arc4 1410 2
sg 25344 0
st 35573 0
uas 8823 0
rtl8187 52559 0
mxm_wmi 1425 0
wmi 8475 1 mxm_wmi
shpchp 26305 0
pci_hotplug 23564 1 shpchp
eeprom_93cx6 2175 1 rtl8187
serio_raw 4653 0
i2c_algo_bit 5391 0
ttm 64320 0
drm_kms_helper 33051 0
drm 208958 2 ttm,drm_kms_helper
tpm_tis 9074 0
tpm 13765 1 tpm_tis
tpm_bios 5121 1 tpm
video 11307 0
b43 353506 0
snd_hda_codec_realtek 60726 1
iTCO_wdt 12813 0
iTCO_vendor_support 1929 1 iTCO_wdt
snd_hda_intel 24053 0
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
snd 58997 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
nvidia 11182217 0
sky2 49219 0
microcode 12345 0
i2c_i801 8180 0
ssb 48803 1 b43
pcspkr 1899 0
evdev 9754 11
firewire_ohci 31709 0
intel_agp 10936 0
firewire_core 51552 1 firewire_ohci
intel_gtt 14047 1 intel_agp
crc_itu_t 1363 1 firewire_core
thermal 7959 0
fan 2426 0
button 4502 0
pcmcia 35785 2 b43,ssb
bcma 22757 1 b43
mmc_core 82070 2 b43,ssb
coretemp 5654 0
i2c_core 20369 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,adt7475,nvidia
mac80211 395712 2 b43,rtl8187
cfg80211 170255 3 b43,mac80211,rtl8187
rfkill 15604 1 cfg80211
pcmcia_core 12253 1 pcmcia
vboxnetadp 18387 0
vboxnetflt 16871 0
vboxdrv 1792216 2 vboxnetadp,vboxnetflt
acpi_cpufreq 5933 0
mperf 1299 1 acpi_cpufreq
processor 26567 1 acpi_cpufreq
nfs 276152 0
nfs_acl 2359 1 nfs
lockd 62987 1 nfs
auth_rpcgss 32327 1 nfs
sunrpc 185190 4 nfs,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
ext4 424871 6
crc16 1359 1 ext4
jbd2 73919 1 ext4
mbcache 5977 1 ext4
aes_x86_64 7508 40
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 20
gf128mul 6050 1 xts
dm_crypt 16496 5
dm_mod 70918 11 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
sd_mod 29239 8
usbhid 36462 0
hid 85541 1 usbhid
usb_storage 44760 0
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 7
ata_generic 3295 0
uhci_hcd 23436 0
libata 167611 4 pata_acpi,ata_generic,ata_piix,pata_jmicron
scsi_mod 132736 7 sg,st,uas,usb_storage,libata,sd_mod,sr_mod
ehci_hcd 41026 0
usbcore 147661 7 uas,uhci_hcd,rtl8187,usb_storage,ehci_hcd,usbhid
usb_common 954 1 usbcore
floppy 58615 0
vfat 10119 0
fat 49739 1 vfat
nls_cp437 5953 0
total used free shared buffers cached
Mem: 4052416 174372 3878044 0 20828 36868
-/+ buffers/cache: 116676 3935740
Swap: 5122680 0 5122680
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
/usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/50netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/50netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
Unloading kernel module rfkill...Done.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sat Aug 25 23:16:04 EDT 2012: performing suspend
hibernate:
Initial commandline parameters:
Sat Aug 25 22:13:46 EDT 2012: Running hooks for hibernate.
Running hook /usr/lib/pm-utils/sleep.d/00logging hibernate hibernate:
Linux gateway 3.4.9-1-ARCH #1 SMP PREEMPT Wed Aug 15 18:59:31 CEST 2012 x86_64 GNU/Linux
Module Size Used by
xt_recent 7901 3
xt_tcpudp 2471 51
ip6table_mangle 1684 0
ipt_MASQUERADE 1738 1
nf_nat_ftp 1668 0
iptable_nat 4024 1
nf_nat 15100 3 nf_nat_ftp,ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 6871 20 nf_nat,iptable_nat
nf_defrag_ipv4 1339 1 nf_conntrack_ipv4
xt_TCPMSS 3439 5
xt_LOG 11943 48
ipt_REJECT 2281 0
iptable_mangle 1584 0
xt_multiport 1758 0
xt_state 1295 17
xt_limit 2041 51
xt_conntrack 3329 0
nf_conntrack_ftp 6261 1 nf_nat_ftp
nf_conntrack 61584 8 nf_nat_ftp,ipt_MASQUERADE,nf_nat,xt_state,xt_conntrack,nf_conntrack_ftp,iptable_nat,nf_conntrack_ipv4
ip6table_filter 1396 1
ip6_tables 18198 2 ip6table_filter,ip6table_mangle
iptable_filter 1456 1
ip_tables 16946 3 iptable_filter,iptable_mangle,iptable_nat
x_tables 16954 17 ip6table_filter,ip6table_mangle,xt_recent,ip_tables,xt_tcpudp,ipt_MASQUERADE,xt_limit,xt_state,xt_conntrack,xt_LOG,xt_multiport,iptable_filter,xt_TCPMSS,ipt_REJECT,iptable_mangle,ip6_tables,iptable_nat
adt7475 20329 0
hwmon_vid 3196 1 adt7475
sg 25344 0
st 35573 0
uas 8823 0
rtl8187 52559 0
mxm_wmi 1425 0
wmi 8475 1 mxm_wmi
shpchp 26305 0
pci_hotplug 23564 1 shpchp
eeprom_93cx6 2175 1 rtl8187
serio_raw 4653 0
i2c_algo_bit 5391 0
ttm 64320 0
drm_kms_helper 33051 0
drm 208958 2 ttm,drm_kms_helper
tpm_tis 9074 0
tpm 13765 1 tpm_tis
tpm_bios 5121 1 tpm
video 11307 0
nvidia 11182217 0
arc4 1410 2
snd_hda_codec_realtek 60726 1
snd_hda_intel 24053 0
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
b43 353506 0
ssb 48803 1 b43
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
snd 58997 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
sky2 49219 0
pcmcia 35785 2 b43,ssb
bcma 22757 1 b43
i2c_i801 8180 0
iTCO_wdt 12813 0
iTCO_vendor_support 1929 1 iTCO_wdt
thermal 7959 0
fan 2426 0
button 4502 0
firewire_ohci 31709 0
mmc_core 82070 2 b43,ssb
firewire_core 51552 1 firewire_ohci
intel_agp 10936 0
intel_gtt 14047 1 intel_agp
crc_itu_t 1363 1 firewire_core
i2c_core 20369 6 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,adt7475,nvidia
pcspkr 1899 0
microcode 12345 0
evdev 9754 11
coretemp 5654 0
mac80211 395712 2 b43,rtl8187
cfg80211 170255 3 b43,mac80211,rtl8187
rfkill 15604 1 cfg80211
pcmcia_core 12253 1 pcmcia
vboxnetadp 18387 0
vboxnetflt 16871 0
vboxdrv 1792216 2 vboxnetadp,vboxnetflt
acpi_cpufreq 5933 0
mperf 1299 1 acpi_cpufreq
processor 26567 1 acpi_cpufreq
nfs 276152 0
nfs_acl 2359 1 nfs
lockd 62987 1 nfs
auth_rpcgss 32327 1 nfs
sunrpc 185190 4 nfs,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
ext4 424871 6
crc16 1359 1 ext4
jbd2 73919 1 ext4
mbcache 5977 1 ext4
aes_x86_64 7508 40
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 20
gf128mul 6050 1 xts
dm_crypt 16496 5
dm_mod 70918 11 dm_crypt
usbhid 36462 0
sr_mod 14823 0
hid 85541 1 usbhid
sd_mod 29239 8
cdrom 35648 1 sr_mod
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
uhci_hcd 23436 0
ata_piix 23160 7
ata_generic 3295 0
libata 167611 4 pata_acpi,ata_generic,ata_piix,pata_jmicron
scsi_mod 132736 7 sg,st,uas,usb_storage,libata,sd_mod,sr_mod
ehci_hcd 41026 0
usbcore 147661 7 uas,uhci_hcd,rtl8187,usb_storage,ehci_hcd,usbhid
usb_common 954 1 usbcore
floppy 58615 0
vfat 10119 0
fat 49739 1 vfat
nls_cp437 5953 0
total used free shared buffers cached
Mem: 2054092 156900 1897192 0 20680 36788
-/+ buffers/cache: 99432 1954660
Swap: 5122680 0 5122680
/usr/lib/pm-utils/sleep.d/00logging hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave hibernate hibernate:
/usr/lib/pm-utils/sleep.d/00powersave hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub hibernate hibernate:
/usr/lib/pm-utils/sleep.d/01grub hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode hibernate hibernate:
/usr/lib/pm-utils/sleep.d/01laptop-mode hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth hibernate hibernate:
/usr/lib/pm-utils/sleep.d/49bluetooth hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/50netcfg hibernate hibernate:
/usr/lib/pm-utils/sleep.d/50netcfg hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules hibernate hibernate:
Unloading kernel module rfkill...Done.
/usr/lib/pm-utils/sleep.d/75modules hibernate hibernate: success.
Running hook /etc/pm/sleep.d/90alsa hibernate hibernate:
/etc/pm/sleep.d/90alsa hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock hibernate hibernate:
/usr/lib/pm-utils/sleep.d/90clock hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq hibernate hibernate:
/usr/lib/pm-utils/sleep.d/94cpufreq hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/95led hibernate hibernate:
/usr/lib/pm-utils/sleep.d/95led hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler hibernate hibernate:
nVidia binary video drive detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler hibernate hibernate: success.
Running hook /usr/lib/pm-utils/sleep.d/99video hibernate hibernate:
/usr/lib/pm-utils/sleep.d/99video hibernate hibernate: success.
Sat Aug 25 22:13:48 EDT 2012: performing hibernate
This seems to be too few information to pin point the exact cause of the problem.
What should I do to troubleshoot this problem ?

My linux installation is actually on a harddrive using SATA on a desktop. I decided to remove this harddrive and put it into an external usb enclosure. I booted this linux installation on my laptop. When doing suspend, it works as it should, which let me think this is probably not a software issue.
If it is a hardware malfunction, which hardware malfunction can be responsible of an incomplete suspend procedure as described earlier?

[Solved] Suspend to ram doesn't work correctly on Acer Aspire 5100

Hi people of the archlinux forum.
Finally I decided to change from ubuntu to archlinux because I wanted to learn more about the world of linux.:D
I have already almost completely set up my laptop, but I have a problem when suspending to ram. The problem comes out when i wake up the laptop, and the screen starts to flicker and will not go away until i restart the laptop.
This is my laptop after the suspend:
I'm using pm-utils to suspend and hibernate my laptop, and the hibernate works fine. All settings were made following the arch wiki.
this is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "glx"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "2174"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
#Option "NewPLL" # [<bool>]
#Option "ZaphodHeads" # <str>
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS482 [Radeon Xpress 200M]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I know you maybe need more info, but i don't really know what do you need... please tell me what do you need and a post it!
Sorry for my english this isn't my native languaje... Thanks you for all
Last edited by geonunez (2010-07-08 20:19:09)

I have the same problem with my Acer Aspire 5100 (video ATI Xpress1100).
xorg.conf is not used. Turning KMS off doesn`t help.
I have tried to use uswsusp, but it doesn`t help. s2ram -n output correctly identify my laptop, which means it is in "whitelist" and correct settings for this hardware is known. s2ram suspend works, but screen blinking after waking up remains the same.
[Sydorenko@SLE ~]$ sudo s2ram -n
Machine matched entry 17:
sys_vendor = 'Acer *'
sys_product = 'Aspire 5100 *'
sys_version = ''
bios_version = ''
Fixes: 0x3 S3_BIOS S3_MODE
This machine can be identified by:
sys_vendor = "Acer "
sys_product = "Aspire 5100 "
sys_version = "V3.10A"
bios_version = "V3.10A"
See http://suspend.sf.net/s2ram-support.html for details.
Last edited by SydMax (2010-06-06 16:53:50)

[Solved] Suspend to RAM no longer works

Suspend to RAM when closing my laptop lid worked out the box for me since I put Arch on my Dell XPS 14. After doing a pacman -Su yesterday (where I noticed that the kernel was updated, but it might be something else) it no longer works. Running 'systemctl suspend' in the terminal does work. Do I have to update a config?
Last edited by skip (2014-04-01 19:48:23)

For anyone else that finds this, systemd 212 doesn't suspend with lid closed with or without external monitor for those using the Nvidia proprietary drivers. Nvidia doesn't provide the necessary information for systemd to know whether or not an external monitor is connected, and thus it plays it safe and doesn't suspend. This is explained nicely at the Freedesktop bug linked above, but I wanted to pass it along here for those that won't follow the link.
Sounds like they're leaning toward reversing the preference (dock/external display users will need to opt out of suspending with lid close) in future versions since non-dock/monitor users >> dock/monitor users.

Suspend to ram doesen't work

Hi. I would like to ask for your advice. I have problem with suspend to ram. In order to have nvidia drivers i had to install newest kernel, 3.12.xx. I found that suspend to ram doesen't work. I put my computer in sleep mode by typing
sudo systemctl suspend
, everything works, computer goes in sleep mode but after resume from it, after wake up i have only black screen with unblinking cursor on the left upper corner of screen. I can't kill x, can't do anything in tty, only hard reset.
I removed nvidia drivers in order to check older kernel, and found that with nouveau drivers kernel 3.9 works, i can suspend and resume. I did another thing. I installed clean Arch, updated it with pacman -Syu, and installed nvidia drivers - the same problem with resuming from suspend. So on fresh and updated system i removed nvidia again, installed old kernel with nouveau - suspend works with resume.
Could somebody help me? Maybe you can point me to a solution? I would like to have nvidia drivers installed and working suspend with resume from suspend to ram.
I checked pm-suspend.log:
http://pastebin.archlinux.fr/478611
I don't see anything wrong here. I asked on polish site about kernel 3.12, and with Ubuntu they said it works. Why on Arch only kernel 3.9 works with resuming from suspend to ram and olny when there are no nvidia drivers (because they need new kernel, i could even use old but i'm not so exprienced to compile kernel myself, won't do that, and with downgrade script from AUR i didn't found nvidia driver for older kernels. There are old kernel, even 3.0.xx but only nvidia drivers from 325 that they need 3.12 kernel).
My spec is AMD X4 955, NVIDIA GTX260, 4GB ram. Arch is x32, kernel 3.12.5.1 (other don't work with resume too, only 3.9 with nouveau).
Last edited by firekage (2013-12-22 12:33:45)

I will try it, but i don't think that this "fix" will really help me - i installed newest driver, installed binary driver from nvidia website on kernel 3.9.8.1 and resuming from suspend to ram works. With newer kernel it just doesen't so if this would be a nvidia MSI problem than i would have it also on kernel 3.9.8.1 where i installed newest drivers ( i installed binary because i don't know which package from aur would work with this kernel, and on aur thare are only drivers from 325, no older).
Edit - just as i said. Doesen't work. It is not related to nvidia because it happens on nouveau. It is kernel fault.
Last edited by firekage (2013-12-25 02:25:34)

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

MY iphone ram is not working what can i do?

HI i am ahmad my iphone 5s ram is not working my iphone is suddenly get down from my hands and get power of plz tell me what can i do

Hey there Ahmad.altaf27,
It sounds like you are unable to turn on your iPhone 5s. I would recommend the troubleshooting from the following article to help you get the issue resolved:
iOS: Not responding or does not turn on
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Regards,
Sterling

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

LR 5 not working on new Macbook Pro.

LR 5 not working on new Macbook Pro. Have tried 2 CC downloads, 5.6 licensed download and 5.5 licensed download, all result in the same thing. It comes up with basic screen but no panels and gives an error occurred when changing modules. Nothing I've tried seems to help. It also has says "get started with lightroom mobile at top left although it says it is Lr 5.6. Anybody else having problems? Calls to adobe result in no help and have to wait till Monday for some technical support. Surely this should run on a NEW laptop with no other software installed!!!

Install logs were fine. Application installed but wouldn't run properly. Finally got Adobe support and it turns out to be a file permissions error. Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/ and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders. Runs fine now. Including this here in case anyone else runs across this issue.

YOUTUBE NOT WORKING ON NEW MACBOOK PRO

YOUTUBE NOT WORKING ON NEW MACBOOK PRO
Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
Please help I have everything possible up to date.
Thanks!

It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

[SOLVED] Suspend to ram / disk not working in newer kernels

Similar Messages

Maybe you are looking for