.:[solved]:.swap activation problem

hey, my swap doesnt activate at boot, plus i cant start it via swapon, im getting
swapon: /dev/sda2: Invalid argument
when i use swapon /dev/sda2 or swapon -a
/dev/sda2 swap swap defaults 0 0
line from my fstab, plus i use crypto root and home, two separate partitions using Luks, thanks for help!
Last edited by nst (2007-11-02 14:02:40)

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x77777777
Device Boot Start End Blocks Id System
/dev/sda1 * 1 5 40162 83 Linux
/dev/sda2 6 71 530145 82 Linux swap / Solaris
/dev/sda3 72 1091 8193150 83 Linux
/dev/sda4 1092 14593 108454815 83 Linux

Similar Messages

  • [SOLVED] Swap Activation Fail

    I've been having this problem for a long time, and I'm really glad to have finally managed to get it fixed.  Here's what I did. 
    Reformatted my swap partitions as linux swap partitions.  (Originally I think they were formatted as swap, but I later changed them to ext4, and when that didn't work I changed them back to linux-swap.)  If you can't reformat them using gparted, try using palimpsest--a.k.a. gnome-disk-utility--to reformat them and then use gparted to format them back to linux-swap.
    Rebooted and everything worked fine.
    I actually even wrote a shell script that would initialize my swap space for me, I just had to enter the super user password in order for it to work.  I also wrote a clisp script to handle the shell script that took care of activating my swap--just as a side note, the reason why I wrote a common lisp script was so that I could have it run both my swact.sh script (the swap activation script) and my ensur.sh script (which ensures that skype continues running--skype often seems to crash from a problem with the preload for my webcam.  The script just automates the process of restarting skype every time it crashes.)

    Disk /dev/sda: 120.0 GB, 120034123776 bytes
    255 heads, 63 sectors/track, 14593 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x77777777
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 5 40162 83 Linux
    /dev/sda2 6 71 530145 82 Linux swap / Solaris
    /dev/sda3 72 1091 8193150 83 Linux
    /dev/sda4 1092 14593 108454815 83 Linux

  • [Solved] Windows Activation problem after reinstalling Windows

    Hi
    I have managed to create 5 recovery dvds with BurnRecovery to reinstall windows on a newly created partition. I've gone from a 1 SSD system partition (AHCI)  to a 2 SSD system partition (RAID).
    problem is windows won't activate because it says my serial key is installed in another computer! Which obviously is my computer but the previous installation.
    What can I do??

    No problem I called Microsoft and an automated process have me a confirmation code to activate it.

  • Activation problem - plz solve

    I have Nokia Lumia 720, it has been a new purchased, not 2nd hand. While downloading songs, it shows, activation problem this phone is already register Nokia music store unlimited subscription. And it does not allow to download and save songs. Plz resolve the issue.

    Nobody on these boards can unlock it for you. Take the device and receipt to a physical Apple Store, or click here and contact Apple.
    (122434)

  • Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click

    Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    Copy a line of text in this window to the Clipboard.
    Paste into the window of another application.
    Wait for the test to run. It usually takes a few minutes.
    Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */  /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n  "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n  [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n  ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Can you help me with FontExplorer font activation problems?

    Anyone know how to solve a font activation problem I am having with FontExplorer 4.2? I am on a new mac with new fonts, I am using Maverick with Adobe CS6. With my new mac I bought the latest version of FontExporer Pro X 4.2. This program is having trouble with font activation in all my Adoble suite apps including Indesign. Here is what I am seeing:
    1. The font activates, but the Adobe app does not recognize that it is active. If I go back to Font Explorer and deactivate manually, then re-activate manually. The adobe app might then recognize it. Sometimes it still doesn't. But this does not stay permanently, as soon as I do a restart I have to go through this process again. I see this more often with the User system fonts, but a few times with my regular fonts.
    2. Other times, such as in Indesign, I go to open the file and the file stalls and doesn’t progress while it is trying to activate the fonts.
    3. Another time I have seen after an illustrator file is opened the fonts aren't recognized as being opened and the text goes blank on the page.
    4. In all adobe apps, if I go to use "replace font" on the missing fonts (even though they are turned on) the "replace font" menu only shows the basic system fonts, it won't show me the other fonts turned on.
    I have seen these issues with both formerly created files and fresh new files.
    I have tried the following based on feedback from Font Explorer staff:
    Refresh your Spotlight database
    1. Quit all applications other than FontExplorer X
    2. Choose Tools > Refresh Spotlight Database
    Clean your font caches
    1. Quit all applications other than FontExplorer X 2. Choose Tools > Clean Application Font Caches (check all available checkboxes)
    3. Choose Tools > Clean System Font Caches (requires restart)
    Still after trying this multiple times, the errors continue and even get more random.
    I have also tried this based on their feedback:
    go to FONTEXPLORER X PRO -> PREFERENCES -> ADVANCED and make sure that "Automatically deactivate fonts which have not been activated by the system" is NOT set to never.
    Then click on TOOLS and clean all font caches. Then reboot the system.
    The auto-activation is using a new Apple technology (called Core Text), which unfortunately does not work correctly with some of the Adobe and Quark applications when keeping the fonts permanently activated. We are currently working on an update, and the next version of FontExplorer X Pro will fix this issue.
    This has also not work. Can anyone help me?

    Here is the official work-around for this problem.
    1. Locate "FontExplorer X Pro.app" in Applications
    2. Right-click on "FontExplorer X Pro.app" and select "Show Package Contents"
    3. Navigate to /Contents/Helpers/
    4. Double-click "FontExplorerXLauncher-3.app" or right-click and "Open" to launch it manually. This is needed only once, afterwards the plugins will work normally.
    Please make sure you open the version with the "-3" suffix, the other one does not fix the problem.

  • DC Activation Problem in CBS

    Hello,
    I am facing DC Activation problems in CBS.
    - We have two DC utils and config. The config DC uses utils DC and everything is working fine locally
    - Today we are migrating these local projects in NWDI.
    - I created new DCs in NWDI and copied the SRC folder. Did all required steps for migration, built locally and it works fine.
    - I then checked in utils and activated the same in NWDI, its working fine.
    - I then defined the dependency from the active workspace and everything is still fine.
    - Now I checkin the src of config DC and build the same. Here the problem arises. The Build Fails
    - Checked SDN and can see lot of people facing this problem but there is no solution.
    Any pointers to solve this problem will be helpful
    Regards,
    Shubham
    Here is the problematic area in log:
         [wdgen] [Info]    Generating packages/com/arteriatech/ppc/uivisibilityws/model/Scrvar_Fstat.java
         [wdgen] WARNING: Metadata of component UIVisibilityComp is not valid! ComponentUsage "//WebDynpro/Component:com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp/ComponentUsage:HandleExceptionCompInst", Role "UsedComponent": A minimum of 1 object(s) is required
         [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp: Has invalid component usage 'HandleExceptionCompInst'
         [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp [HandleExceptionCompInst]: Component usage has no used component
         [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp [ValidationCompInst]: Component usage has no used component
         [wdgen] [Info]    Catching throwable null
         [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError

    Problem Solved.
    I removed the utils DC from my client. Also deleted the folder from the workspace. After this I created the project from the Dev Config perspective again. I was surprised to see there is no component in my utils DC and thats why the problem was there.
    I again copied all the src folder in the workspace and refreshed the DC. Now it locked all the source in the activity. I checked it in and repeated the above excercise. This time all the source code was there.
    I deleted the dependency in the config dc and created again from active workspace(although now I realize it was not required) and checkedin and activated.
    Hurray!!! It got activated.
    Regards,
    Shubham

  • Flash MX Professional 2004 Activation Problems

    I am having trouble activating Flash MX Professional 2004. I have had the product for many years, but it is asking again to be reactivated, probably because I have moved the vmWare virtual machine on which it is installed to a new host computer.
    I have learned that the old Macromedia activation servers are no longer available, and have tried using the information provided by http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html. But that only activates me to a non-professional version. I need to use features in the Professional version.
    Is there a serial number available for Flash MX Professional 2004?

    OK, I have got my problem sorted.
    After a second call to UK customer service, I was e-mailed a serial number that they said was for Flash MX 2004 Professional. However, it didn't work with my version! My version is 7.2, and the original serial number of my product starts PFD700. The serial number given by Adobe is PFD800-00466-08280-86965. Maybe the 800 means its for a later version, don't know, but my version does not accept this as a valid serial number.
    A third call to try to get a PFD700 serial number got me a brick wall again, they insisted that was the only serial number for MX 2004 Pro they had. At this point I followed sinious's suggestion and asked to talk to a supervisor. They were on the phone, and I was promised a call back. I'm still waiting.
    So I hunted a bit harder with Google and eventually found a site that gave me a serial number. The use of that unlocked the Professional features of my version, and I'm up and running again.
    Thanks for your contributions guys, you've both helped. I agree with sinious's critism of moccamaximum, and wouldn't normally go to sites of dubious provenance for help. But after being exhausted by my efforts to get help from Adobe - who to be fair nearly got there in the end - I went hunting and found something that solved my problem. After all, Adobe themselves are publishing activation-free serial numbers.
    I've given the serial number I got from Adobe, it may help others who experience activation problems in the future.
    But I'll follow sinious's advice and not give out the serial number or details of the website I got it from. It wasn't very hard to find.

  • Nokia lumiya 820 music activation problem

    I have music activation problem, how to solve them ? when I start nokia music then display massage Activation problem. This problem from begining from purchase the mobile, so once I had close the nokia account and then reopnen the same account. I have not install this account any other mobile. So please give me solution for this problem.

    DineshRamolia,
    Welcome to Nokia Discussions!
    Steps on how to activate Nokia Music for Windows Phone is located on this page at http://www.nokia.com/in-en/support/product/nokia-music/userguidance/?action=singleTopic&topic=GUID-D...
    If the problem still persists, I suggest you to contact Nokia Support in your country.

  • Oracle Developer Suite 10g - Windows 7 - swap space problem

    Hi brothers and sisters,
    Hope all you are fine. I am facing swap space problem while installing Oracle Developer Suite 10g on Windows 7 . I have downloaded and installed Oracle Database 11g Express Edition successfully and it is working properly. Now, I have downloaded two files
    a. ds_windows_x86_101202_disk1,
    b. ds_windows_x86_101202_disk2
    to install Oracle Developer Suite 10g using Windows 7 Ultimate. The Oracle Universal Installer have passed the following issues:
    a. Operating system version,
    b. Monitor
    But while checking swap space, it gives a message, "0 MB available, 1535 MB required", Failed. I have 2 GB RAM installed and system managed paging file space which is currently allocated to 2038 MB in my system .
    Please solve me the problem.
    Noor

    increase the system virtual memory for the OS drive.
    check this link
    http://hamid-oracle.blogspot.com/2011/06/how-to-install-oracle-developer-suite.html
    also check this link.
    Re: error installing oracle forms 11g release 2
    Hope this helps
    If someone response is correct or helpful, mark accordingly. and if answered mark answered.
    Edited by: HamidHelal on Jun 27, 2012 2:28 PM

  • Nokia activation problem

    Hi
    i have a nokia Lumia 520 and since a couple of weeks i have been facing some problems with my nokia music subscription pack. Everytime i try to download something this message appears "ACTIVATION PROBLEM you are already registered with a nokia Lumia unlimited subscription pack" now i don't remember my original account with which i first logged in.. Please help me out.. How do i solve this problem.. Thanks a ton for your time

    Hi, p2050. Welcome to the Nokia Support Discussions. The Nokia MixRadio Unlimited service is tied up with the Nokia account you've used to register to the service. In this case, think of the possible email addresses you've used before and login for your MixRadio app. If you have forgotten your password, you can use this link to retrieve it:
    https://account.nokia.com/acct/passwordReminder
    Keep us posted.

  • TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    In the course of your troubleshooting to date, have you also worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • WHAT THE HELL IS GOING ON? Activation problem 194:100

    What the ihell is going on?
    I have been burdened with activation issues for weeks - see my previous thread. I have had no response here from Adobe about how to fix it. Please don't say this is a 'user to user' forum. It isn't a 'U2U' forum when Adobe state this is the first place we should look!
    Now, no CC program will run owing to something called 'Activation problem 194:100'.
    Yes, I have logged out. Yes, I have rebooted. Yes, I have deactivated 'more than 2 machines'. Why should I have to repeatedly click to 'deactivate 2 previous activations' when there has NEVER been more than one activation?
    Adobe not only make me look a laughing stock in the classroom but this constant issue that has been going on for weeks now subliminally tells students Adobe software is useless!
    When will I be able to use CC again? I am paying for it remember!!!!!!!!!!!!!!!!!!!!!!

    Hello Rajshree,
    Welcome to Adobe Forum.
    CC has only EVER been activated on ONE PC.
    If you look at http://forums.adobe.com/message/6198690#6198690 you'll see (like many other users) I have to constantly sign in and reactivate. It is probably this that is causing the multiple activations.
    However, to reiterate, CC is only running on ONE computer. It has not at any time been activated on more than the same PC. One activation - one PC.
    So, the suggestion of waiting a few hours (if the prog won't activate / run) is less than adequate. Like everyone else, I pay to have it running 24 hours a day - every day.

  • Need to solve serious security problem with Oracle Reports URL

    As mentioned repeatedly on this forum, Oracle Reports allows serious security breaches that allow users to see reports that they did not generate -- it's easy to guess a legal URL by changing the getjobid parameter.
    I've reviewed the JavaDocs to part of the rwrun.jar file and reviewed some of the example report plugins. This shows promise in helping to solve this security problem but critical pieces are missing.
    1) The javadocs are accurate for only 10g (9.0.4) but not correct for 10g (10.1.2+), which we are currently using. I need access to the updated version of this javadoc.
    2) Even with the updated version of the JavaDoc, I haven't found a class from which to inherit that would give me the opportunity to generate random jobid values, which then would effectively prevent users from guessing other jobid values, and thereby gaining access to other's reports (which in our cases, may contain sensitive information.
    3) We have found that we can send the parameter=value of EXPIRATION=1 which helps protect such information, but this requires that every program which invokes a report be modified to add this parameter. It would be far better for the report server to be configured to use a java class we write that inherits from some rwrun.jar class that would by default, add the EXPIRATION=1 parameter.

    Hi,
    Thanks for our replies. I will ask to an administrator about this security problem, now I know it depends of a security parameter.
    But I would know if it could be possible to hide the technical name of the query in the url. It could improve the security level of our reports in a first time in this way.
    Thanks a lot,
    JW.

  • HT4623 i have sim activation problem in my i phone after updating

    i have sim activation problem in my i phone after updating

    If the phone was unlocked by anyone other than Apple or the carrier it was locked to (that is, unlocked by hacking) then it will become locked to the original carrier when you update it.

Maybe you are looking for