[SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
But the same thing happens in comand line only mode.
Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
Last edited by schlumpfimsumpf (2014-04-10 19:16:57)

Me wrote:
It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
H/W path Device Class Description
===============================================
system GA-970A-UD3
/0 bus GA-970A-UD3
/0/0 memory 128KiB BIOS
/0/4 processor Athlon
/0/4/a memory 128KiB L1 cache
/0/4/c memory 2MiB L3 cache
/0/b memory 128KiB L1 cache
/0/29 memory 8GiB System Memory
/0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
/0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
/0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
/0/100/2/0 display GF106 [GeForce GTS 450]
/0/100/2/0.1 multimedia GF106 High Definition Audio Controller
/0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
/0/100/4/0 bus EJ168 USB 3.0 Host Controller
/0/100/4/0/0 usb3 bus xHCI Host Controller
/0/100/4/0/0/2 storage ADATA USB Flash Drive
/0/100/4/0/1 usb2 bus xHCI Host Controller
/0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
/0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
/0/100/a/0 bus EJ168 USB 3.0 Host Controller
/0/100/a/0/0 usb8 bus xHCI Host Controller
/0/100/a/0/1 usb7 bus xHCI Host Controller
/0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
/0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/12/1 usb6 bus OHCI Host Controller
/0/100/12/1/5 input M Dongle
/0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/12.2/1 usb1 bus EHCI Host Controller
/0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/13/1 usb9 bus OHCI Host Controller
/0/100/13/1/1 input USB Receiver
/0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/13.2/1 usb4 bus EHCI Host Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
/0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
/0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
/0/100/14.5/1 usb10 bus OHCI Host Controller
/0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
/0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/16/1 usb11 bus OHCI Host Controller
/0/100/16/1/3 multimedia USB Web Camera
/0/100/16/1/4 multimedia USB Sound Device
/0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/16.2/1 usb5 bus EHCI Host Controller
/0/101 bridge Family 15h Processor Function 0
/0/102 bridge Family 15h Processor Function 1
/0/103 bridge Family 15h Processor Function 2
/0/104 bridge Family 15h Processor Function 3
/0/105 bridge Family 15h Processor Function 4
/0/106 bridge Family 15h Processor Function 5
/1 scsi6 storage
Working again. I think problem was the partition was full.
Last edited by gyurman (2014-04-13 07:51:22)

Similar Messages

[Solved] System freezes after 10 minutes if no monitor attached

I've got a server machine that has been running Arch for a month now. It has had a problem of constant freezing all the time. At first it seemed completely random but today I noticed the system freezes up exactly after 10.00 minutes of uptime, if there is no monitor plugged into the system. If I unplug the display after ten minutes, the system will run fine as long as I want to (days, weeks) without it. Ten minutes is also the time after which the monitor will go into stand-by mode. Seems like some kind of a power-saving bug? No entries in any log file @ /var/log...
The system runs only basic home network functionalities; it serves as an NFS server, a print server (CUPS) and runs Lighttpd as a web server. It doesn't do Xorg nor has any fancy kernel modules loaded either. The system is up-to-date (stable repos). No custom-built software.
Somewhat sad since I previously ran NetBSD on the server, but it didn't support my printer-scanner (only printer OR scanner, one at a time), then switched to FreeBSD which failed with my new WLAN card, so then turned to Arch that I've ran on desktop for years now (also like the BSD-ness), and then this...
Last edited by sj87 (2010-02-07 18:47:43)

Case closed, the source of trouble was once again kernel mode-setting (I think)... I blacklisted the drm_kms_helper module and some other stuff and that disabled the KMS functionality, and the server now doesn't freeze at any point.
Last edited by sj87 (2010-02-07 18:48:23)

System freezes after upgrade to os x 10.6.8

Hi
I have a random freezes after couple of minutes of using the computer. This occurs since I have upgraded to OS x 10.6.8
Thanks for support
MacBook
Model Name:          MacBook
Model Identifier:          MacBook4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz

Try this:
Boot from the Snow Leopard DVD and start the installation process. After you select the Language, the next screen will display a menu bar. Go to Utilities in the menu bar and select Disk Utility. When DU opens, select your drive on the left, click the First Aid tab (on the top) and click on Repair Disk.
When that is done, click Repair Permissions.
When that is done, quit DU and restart the computer in the usual way.

[Solved]System freeze after reboot after upgrade

Hi,
At first I encountered the problem that "loading udev uevents" took forever, so I loaded a live cd and upgraded everything. Since then, my computer does boot and doesn't hang at loading udev uevents, but it now freezes when it shows a login field after booting. The keyboard doesn't do anything, and the screen just keeps frozen like a popsicle. I wanted to downgrade my nvidia and kernel version, but when I try to downgrade my nvidia version it states that My kernel version is too high, and when I try to downgrade that, My nvidia version is too high, seemed like an impossible loop to me.
Ow, and between booting I can see a lot of errors starting daemons and mounting the systems as well, but as I can't boot it's quiet hard to look them up (if I knew where to look, but I don't because I'm kind of a newbie) and post them here.
I've been thinking about installing arch all over again, but it seems to mee that I then have to lose all the installed programs, daemons and configurations which took me over weeks to create and make work, so any other option would be very helpfull.
Tom
Last edited by tomzooi (2012-04-21 15:29:36)

rc.conf :
DAEMONS=(syslog-ng network netfs @crond hal slim fam cups @sshd @mpd @alsa @samba mysqld httpd @transmissiond @xinetd)
I use an nvidia card, I boot to x using slim
I currently can boot again normally, loging and use the command prompt (thank god), also the daemons are all running, except for slim. When I start slim in the terminal I get the error:
slim: Stale lockfile found, removing it
Somehow I managed to fix this by removing and reïnstalling the kernel, but slim isn't running yet.

System freezes after suspend

Hi All,I thought its an ubuntu issue; they say its a Lenovo Kernel issue.What do you think? thanks!SealFrom:Seth Arnold [email protected]:[email protected]:[Bug 1482618] Re: After suspending - SYSTEM FREEZESDate:augusztus 7, 2015 11:06There's a kernel stack dump in the logs and IO errors to block devices, this is probably a kernel or hardware issue instead of X11 issue. ** Package changed: xorg (Ubuntu) => linux (Ubuntu)--You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1482618 Title: After suspending - SYSTEM FREEZES Status in linux package in Ubuntu: New Bug description: Dear Developers, suspending function does not work.. When I manually suspend the system (pressing the suspend button, clicking the suspend logo that appears), when I open the screen next time, the system freezes many times. - At least, the screen is fully black, nothing happens. The computer is a Lenovo Yoga 3 with u15.04. Can you please help in this ? many thanks Seal ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: xorg 1:7.7+7ubuntu4 ProcVersionSignature: Ubuntu 3.19.0-25.26-generic 3.19.8-ckt2 Uname: Linux 3.19.0-25-generic x86_64 NonfreeKernelModules: wl .tmp.unity.support.test.0: ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true Date: Fri Aug 7 13:30:46 2015 DistUpgraded: Fresh install DistroCodename: vivid DistroVariant: ubuntu DkmsStatus: bcmwl, 6.30.223.248+bdcom, 3.19.0-25-generic, x86_64: installed ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Broadwell-U Integrated Graphics [8086:161e] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:3906] InstallationDate: Installed on 2015-07-27 (10 days ago) InstallationMedia: Ubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: LENOVO 80HE ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-25-generic.efi.signed root=UUID=4fff414d-6c5a-4304-bdda-4c1932e1cafd ro quiet splash vt.handoff=7 SourcePackage: xorg UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/29/2015 dmi.bios.vendor: LENOVO dmi.bios.version: A6CN50WW dmi.board.asset.tag: NO Asset Tag dmi.board.name: VIUU4 dmi.board.vendor: LENOVO dmi.board.version: 31900058 WIN dmi.chassis.asset.tag: NO Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Lenovo YOGA 3 Pro-1370 dmi.modalias: dmi:bvnLENOVO:bvrA6CN50WW:bd04/29/2015:svnLENOVOn80HEvrLenovoYOGA3Pro-1370:rvnLENOVO:rnVIUU4:rvr31900058WIN:cvnLENOVO:ct10:cvrLenovoYOGA3Pro-1370: dmi.product.name: 80HE dmi.product.version: Lenovo YOGA 3 Pro-1370 dmi.sys.vendor: LENOVO version.compiz: compiz 1:0.9.12.1+15.04.20150410.1-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.60-2 version.libgl1-mesa-dri: libgl1-mesa-dri 10.5.2-0ubuntu1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 10.5.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.17.1-0ubuntu3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.9.0-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.5.0-1ubuntu2 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.11-1ubuntu2build1 xserver.bootTime: Fri Aug 7 10:28:02 2015 xserver.configfile: default xserver.errors: [dix] ATML1000:00 03EB:8A10: unable to find touch point 0 xserver.logfile: /var/log/Xorg.0.log xserver.outputs: product id 17226 vendor SDC xserver.version: 2:1.17.1-0ubuntu3 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1482618/+subscriptions

kokoko3k wrote:
from hdparm:
AdvancedPM=yes: unknown setting WriteCache=enabled
Maybe the disk goes to sleep too often; this is bad even for your hdd life.
Do you set hdparm at boot or maybe a Power managment script does that?
Remember that hdparm settings are lost on hibernation/suspend, so you need to rerun it when the pc wakes up.
Anyway,at wakeup, try to run
sudo hdparm -B 255 /dev/sda
To disable power managment.
It works like a charm! Thanks for your reply. This question really drove me crazy for long time. It really caused by wrong setting of APM.From your reply then I follow the instruction of hdparm wiki and make it automated.

Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
I tried it with a differnt Iphone and the results are the same. Any suggestions?

Hi JZN1994,
Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
Thanks for reaching out,
-Joe

Photo Booth Freezes after upgrading to OS X Yosemite Wifi drops, iMac lags!

Photo Booth Freezes after upgrading to OS X Yosemite Wifi drops, iMac lags!

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

System freezed after "startx"

Hello,
after updating with "pacman -Syu" my system freezes after boot-process at the loginscreen.
To be more exact: When X starts, all my input-devices doesn't react anymore. Even new plugged-in keyboards doesn't do something.
Numlock doesn't change lights on my keyboard.
As far as i know pacman shows me while updating a message about udev.
Pacman has updated udev, kernel26 and some other packages.
In GRUB I've appended "single" to get a terminal after booting and before X starts.
I've tried to reset X by replacing xorg.conf with xorg.conf.backup, but no effect.
Everytime I enter "startx" in the terminal, I can see some white textboxes, but can't move my mouse or enter anything with my keyboard.
Hardreset is the only thing, that helps.
So anybody know what to do in this situation or has any tips for me?
I would appreciate it if somebody can help me... thanks in advance!

Yes, I have a .xinitrc in my $HOME.
I've tried several things and found out, that not X is the problem alone.
It's more the udev update, which doesn't recognize my hardware anymore.
When I type in startx in tty, X now starts with my KDE, where I could see, that stuff is loading (so it's not freezed).
But KDE alerts me, that some audio hardware were removed and even in tty i couldn't mount my usb harddrive or start my notebook-wlan.
So I came to the conclusion, that only my hardware were not recognized..
Is there a way to get udev recognize my hardware again? I've even downgraded udev and kernel26 to versions, which worked properly..., but that doesn't help.
hope you can help.. =/

System freezes after installation of version 11.5.502.149

WindowsXp, Firefox, Flash player 11.5.502.149 - I have made 2 attempts to load latest version; both times when I have restarted my system Windows will only load to Wallpaper and then stops- I waited for atleast 30 minutes - no program icons, no taskbar etc, Have used safe mode to uninstall flash player, did registry fix, have used system restore, still will not load. Did chkdsk - no apparent disk problems - but then after attempting to restart several times after long wait finally loaded. System will now restart, but as this happened after installation of flash player 2x I am unwilling to retry. - and now can not reload older version of flashplayer. - have recently installed other program updates and have not had system freeze so do not think it is a general installation problem. Any ideas?
Thanks

Pat
Trying to install an older version I got a message something to the effect that a newer version is available and program does not install. By hunting around the support areas on Adobe I did find a page that noted that if for some reason the new version did not work an older version was archived and a link.. so I did find an older version that would load.. of course I had to find a Zip program to unzip the file and it did try the same message ... there were 2 unzipped versions - only one worked but I do now have a working version albeit of Flash Player.
I googled for WindowsXp freezing and found a number of bulletin boards/forums that discussed solutions - which were pretty much what I did. Typically it happened after installing a new or updated program. No reasons were mentioned as to why or what was happening and the solutions of starting in safe mode, uninstalling, restoring, chkdsk are all sort of hit and miss... if one doesn't work try another... with the final solution being reload windows.. of course my version came installed and I don't have a backup disk so I imagine that would be another day or two of total frustration... so I guess I will avoid trying to update the flash player as long as possible. I have my system set up to only allow updates I have confirmed.
Thanks for your prompt response.
Janet Forbes
Quoting Pat Willener <[email protected]>:
Pat Willener http://forums.adobe.com/people/pwillener created the
discussion
"Re: system freezes after installation of version 11.5.502.149"
To view the discussion, visit:
http://forums.adobe.com/message/5057581#5057581

T400 downgraded from Vista to XP resulting in system freeze after 10 min activity

Hi,
I just purchased a T400 and have gone through the process of (re)grading the OS from Vista Business to XP. From the moment the setup dialogue for XP started (machine name, date, users etc), the whole systems freezes after working the machine for around 10-15 min. First, I suspected it to be a mouse freeze, but I get no reponse from neither the keyboard nor mouse (not sure if it is a complete system freeze or to do with mouse/keyboard drivers). Even the clock in the bottom right corner stops running.
To get the system going I need to force the system to reboot using the power on/off button.
The XP restore disc I used came from Lenovo with the computer, and I have followed the instructions by point. Do any of you recognize this problem? And more importantly, know how to deal with it
Message Edited by Missmostly on 10-16-2008 06:28 AM
Message Edited by Missmostly on 10-16-2008 08:56 AM

Hi,
I posted a message on the forum 5 days ago, and got no replies. I agree the problem description might be a bit vague, so here we go again:
I recently purchased a T400 (model 2765, 21g) with the XP downgrade option (the MS Windows XP Conversion Kit containing 2 CD's: Lenovo's Rescue & Recovery plate + XP product recovery plate with SP2). During the installation of XP (the end part where you set up your user) the computer freezes (no response from keyboard). I power the machine off and on again, and the installation continues as it were. I finish the installation and the computer is set. After additional 10 min the computer freezes again in the same style.
I imagine it to be a powermanagement disagreement between MS system and Lenovos powermanagement system, and set every parameter to be always ON and full performance ( I am running on AC). This time the freeze doesn't happen for an hour. I then begin to reinstall the powermanagement drivers and the general drivers for this particular model running XP (from Lenovos drivers Matrix), and now I am looking at two hour before each freeze. That is if I don't plug in any external hard drives (then the system can crash within 15 min or an hour), and we turn a blind eye to the occational freeze after 10 min on the first boot of the day .
At some point I suspected there to be a conflict with the existing SATA drivers that I also have reinstalled for the occation. Still the system is NOT stable.
And the frustrating thing is that I have no clue why. The sympthom is always the same, complete screen freeze ( I do not know if the system is active behind (no hard drive running)), that can only be cured with a forced boot.
If any of you reconize this, please assist me to a solution. I have by now installed all programs to my liking including all MS updates (SP3 etc), and hope there is a way to get to the core without a complete reinstall (or worse, return to the realm of Vista)

[SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
many modules such as wifi or psmouse are not loaded.
My PC is Asus Zenbook UX31E.
If I do by hand like
# modprobe ath9k
# modprobe psmouse
wifi and psmouse are OK,
but I want to set all necessary modules auto loaded.
* Output of lsmod of linux 3.9.5-1 was 87 rows
but lsmod of 3.11.6 (I attache below) is only 39 rows.
* Both
/etc/modprobe.d/
/etc/modules-load.d/
are empty on 3.9.5-1 and 3.11.6.
Please give me advice, thx.
Last edited by taro (2014-01-08 11:20:46)

Thx. The version numbers seem to be identical.
% uname -a [~]
Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
% pacman -Qi linux [~]
Name : linux
Version : 3.11.6-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.11.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64493.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 19 Oct 2013 06:25:12 AM JST
Install Date : Fri 08 Nov 2013 12:06:17 PM JST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : None
best regards.

System freeze after prolonged Flash usage

Hello,
I stumbled across this thread as i am having exactly the same problems as Fossil, although he has been quiet so i guess disabling hardware acceleration worked for him. However this is not working for me, I have sent two graphics cards back on the strength of this issue and im still getting it on my third card! Firstly my system:
Intel Core I7-3930K 3.20GHz Socket 2011 12MB Cache
32GB RAM Corsair 8GB (2x4GB) DDR3 2000MHz XMS3 Memory Kit CL9 1.65V
Asus P9X79 PRO S2011 Intel X79 DDR3 ATX Motherboard
Corsair 120GB SSD
Samsung Synch Master MD230x3 Monitors
Windows 7 Pro (64bit)
Now because im using eyefinity monitors i bought this card:
PowerColor HD 6870 2GB GDDR5
First one failed instantly when i played any sort of flash video, on advice from retailer i sent it back (they said it was a known issue with some AMD 6870 cards, Second one came back and was slightly better which was odd but the same problem, i formatted the drive and started from scratch only installing the latest drivers from Powercolor rather than using the supplied disk and then upgrading.
After opening multiple websites using flash such as you tube, bbc news videos etc system just freezes forcing a reboot. I used core temp plus the video card supplied performance monitor, i saw no increase in system temps, fan speeds or power being supplied. Supplier would only refund my money as the card went out of stock which is a pain because this is one of the few that support 6 monitors via mini dp port at a reasonable price So I ordered the following card:
PowerColor HD 7870 PCS+ 2GB GDDR5
Only supports 4 monitors but as my board is pci 3.0 i thought i would try a card that supports it to see if this solves the problem.
Well it didn’t! After about an hour of usage with flash websites i get a system freeze. If i uninstall flash, i dont get any problems at all.
Adobe, i need some help here guys because this is not normal and if there is a problem with the latest hardware architectures then I need a fix.
Regards

Yeah i was not sure about creating a new thread as the original problem had not been solved but thanks for the update Fossil, glad you got it working on an older version however i dont think thats a satisfactory solution from Adobe, we cant all stay on older versions of flash as some websites will not funtion without the latest player.
Chris,
Thanks for your prompt response
I am following your advice and yes i have done just about everything apart from the bug report thing and this interesting step:
In addition to updating your video drivers and disabling Flash Player hardware acceleration, please try the following steps:
Windows:
Close all browsers
Open an explorer window
Navigate to the following folders and delete the contents
%appdata%\adobe\Flash Player\
%appdata%\macromedia\
Finally, restart your browser and try again
I have no idea why that step should have any impact on this issue, however I have been running flash websites with HA turned off (this is one of the first things i tried on the previous graphics cards and i still experience the failure) for about an hour now (10 open at the same time + 3 or 4 flash youtube videos playing) and all looks good so far.
Note, i had performed some archiving last night which caused high disk i/o + cpu usage over a period of about 14 hours and i did not experience a system crash.
I will update you later today or as soon as i experience the failure.
Regards
Regan

Bluetooth Mighty Mouse keeps freezing after upgrading to Leopard

My bluetooth mighty mouse has frequent, intermittent freezes (which appear to be a loss of sync to the iMac) after upgrading to Leopard (now 10.5.1) from 10.4.11 on my iMac 24" alum body. This mouse was rock solid on my iMac running Tiger. Luckily I do have a corded mouse which I've been forced to use the past week or so.
Can anyone suggest anything?
Thanks.

I was just trying to help my Dad with the same exact issue (Mighty Mouse stops working on waking from sleep & trying to open bluetooth prefs at that point causes the system to lock up. Have to hold down power button to reboot)
Oddly I have Leopard on my iMac 2.16 Core 2 Duo and have no issues with my Mighty Mouse.
Hopefully someone comes up with an answer .... My Dad is 80 and just bought a new Powerbook and Mighty Mouse. It's hard to explain why the mouse doesn't work.

[SOLVED] System breakage after recent update

Hi.
After recent system updates with "pacman -Syu" various packages have broken.
For example chromium either crashes on start or does not load pages:
~ % chromium
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
third_party/tcmalloc/chromium/src/central_freelist.cc:319] tcmalloc: allocation failed 4096
[11:11:1108/215509:FATAL:process_util_linux.cc(685)] Out of memory.
[1370:1396:1108/215517:ERROR:child_process_launcher.cc(283)] Failed to launch child process
~ % chromium
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
# Fatal error in v8::Context::New()
# V8 is no longer usable
[1480:1504:1108/215533:ERROR:child_process_launcher.cc(283)] Failed to launch child process
Also kwrite crashes on start.
Also KDE plasma desktop does not start telling about KWin crashes.
Also Kile says "[PDFLaTeX] failed to start]" when I try to produce .pdf from .tex.
Here is my update log:
[2012-11-05 02:18] Running 'pacman-color -Syu'
[2012-11-05 02:18] synchronizing package lists
[2012-11-05 02:18] starting full system upgrade
[2012-11-05 02:18] upgraded bash (4.2.037-1 -> 4.2.039-1)
[2012-11-05 02:19] upgraded opencv (2.4.2-5 -> 2.4.3-1)
[2012-11-05 02:19] upgraded qt (4.8.3-4 -> 4.8.3-5)
[2012-11-05 02:19] upgraded tightvnc (1.3.10-8 -> 1.3.10-9)
[2012-11-05 12:27] Running 'pacman-color -Syu'
[2012-11-05 12:27] synchronizing package lists
[2012-11-05 12:27] starting full system upgrade
[2012-11-07 08:58] Running 'pacman-color -Syu'
[2012-11-07 08:58] synchronizing package lists
[2012-11-07 08:58] starting full system upgrade
[2012-11-07 09:28] Running 'pacman-color -Syu'
[2012-11-07 09:28] synchronizing package lists
[2012-11-07 09:28] starting full system upgrade
[2012-11-07 09:28] upgraded cairo (1.12.6-2 -> 1.12.8-1)
[2012-11-07 09:28] upgraded flashplugin (11.2.202.243-1 -> 11.2.202.251-1)
[2012-11-07 09:28] upgraded glibmm (2.34.0-1 -> 2.34.1-1)
[2012-11-07 09:28] upgraded htop (1.0.1-1 -> 1.0.2-1)
[2012-11-07 09:28] upgraded iputils (20121011-1 -> 20121011-2)
[2012-11-07 09:28] upgraded nvidia-utils (304.60-1 -> 304.64-1)
[2012-11-07 09:29] upgraded lib32-nvidia-utils (304.60-1 -> 304.64-1)
[2012-11-07 09:29] upgraded libtirpc (0.2.2-2 -> 0.2.2-4)
[2012-11-07 09:29] >>> Updating module dependencies. Please wait ...
[2012-11-07 09:29] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-11-07 09:29] ==> Building image from preset: 'default'
[2012-11-07 09:29] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-11-07 09:29] ==> Starting build: 3.6.6-1-ARCH
[2012-11-07 09:29] -> Running build hook: [base]
[2012-11-07 09:29] -> Running build hook: [udev]
[2012-11-07 09:29] -> Running build hook: [pata]
[2012-11-07 09:29] -> Running build hook: [scsi]
[2012-11-07 09:29] -> Running build hook: [sata]
[2012-11-07 09:29] -> Running build hook: [filesystems]
[2012-11-07 09:29] -> Running build hook: [usbinput]
[2012-11-07 09:29] -> Running build hook: [fsck]
[2012-11-07 09:29] -> Running build hook: [consolefont]
[2012-11-07 09:29] -> Running build hook: [keymap]
[2012-11-07 09:29] ==> Generating module dependencies
[2012-11-07 09:29] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-11-07 09:29] ==> Image generation successful
[2012-11-07 09:29] ==> Building image from preset: 'fallback'
[2012-11-07 09:29] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-11-07 09:29] ==> Starting build: 3.6.6-1-ARCH
[2012-11-07 09:29] -> Running build hook: [base]
[2012-11-07 09:29] -> Running build hook: [udev]
[2012-11-07 09:29] -> Running build hook: [pata]
[2012-11-07 09:29] -> Running build hook: [scsi]
[2012-11-07 09:29] -> Running build hook: [sata]
[2012-11-07 09:29] -> Running build hook: [filesystems]
[2012-11-07 09:29] -> Running build hook: [usbinput]
[2012-11-07 09:29] -> Running build hook: [fsck]
[2012-11-07 09:29] -> Running build hook: [consolefont]
[2012-11-07 09:29] -> Running build hook: [keymap]
[2012-11-07 09:29] ==> Generating module dependencies
[2012-11-07 09:29] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-11-07 09:29] ==> Image generation successful
[2012-11-07 09:29] upgraded linux (3.6.5-1 -> 3.6.6-1)
[2012-11-07 09:29] upgraded live-media (2012.10.24-1 -> 2012.11.05-1)
[2012-11-07 09:29] upgraded perl (5.16.1-2 -> 5.16.2-1)
[2012-11-07 09:29] upgraded lm_sensors (3.3.2-5 -> 3.3.3-1)
[2012-11-07 09:29] upgraded nvidia (304.60-3 -> 304.64-1)
[2012-11-07 09:29] upgraded optipng (0.7.3-1 -> 0.7.4-1)
[2012-11-07 09:29] upgraded subversion (1.7.7-1 -> 1.7.7-2)
[2012-11-07 09:29] upgraded tdb (1.2.10-1 -> 1.2.10-2)
[2012-11-07 21:05] Running 'pacman-color -Syu'
[2012-11-07 21:05] synchronizing package lists
[2012-11-07 21:05] starting full system upgrade
[2012-11-07 21:05] upgraded chromium (22.0.1229.94-1 -> 23.0.1271.64-1)
[2012-11-07 21:05] upgraded libcanberra (0.30-1 -> 0.30-2)
[2012-11-07 22:27] Running 'pacman-color -Syu'
[2012-11-07 22:27] synchronizing package lists
[2012-11-07 22:27] starting full system upgrade
[2012-11-07 22:27] Running 'pacman-color -Syu'
[2012-11-07 22:27] synchronizing package lists
[2012-11-07 22:27] starting full system upgrade
[2012-11-07 22:30] Running 'pacman-color -S reflector'
[2012-11-07 22:31] installed reflector (2012.10-1)
[2012-11-07 22:32] Running 'pacman-color -Syu'
[2012-11-07 22:32] synchronizing package lists
[2012-11-07 22:32] starting full system upgrade
[2012-11-07 22:33] Running 'pacman-color -Rsn reflector'
[2012-11-07 22:33] removed reflector (2012.10-1)
[2012-11-07 22:33] Running 'pacman-color -Syu'
[2012-11-07 22:33] synchronizing package lists
[2012-11-07 22:33] starting full system upgrade
[2012-11-07 22:33] Running 'pacman-color -Syu'
[2012-11-07 22:33] synchronizing package lists
[2012-11-07 22:33] starting full system upgrade
[2012-11-08 00:32] Running 'pacman-color -Syu'
[2012-11-08 00:32] synchronizing package lists
[2012-11-08 00:32] starting full system upgrade
[2012-11-08 01:05] Running 'pacman-color -Syu'
[2012-11-08 01:05] synchronizing package lists
[2012-11-08 01:05] starting full system upgrade
[2012-11-08 08:54] Running 'pacman-color -Syu'
[2012-11-08 08:54] synchronizing package lists
[2012-11-08 08:54] starting full system upgrade
[2012-11-08 21:33] Running 'pacman-color -Syu'
[2012-11-08 21:33] synchronizing package lists
[2012-11-08 21:33] starting full system upgrade
[2012-11-08 21:34] upgraded libmikmod (3.1.12-4 -> 3.2.0-1)
Last edited by vmat (2012-12-24 20:10:47)

More crashes of chromium:
~ % chromium
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
[2666:2692:1108/223202:ERROR:child_process_launcher.cc(283)] Failed to launch child process
# Fatal error in v8/src/store-buffer.cc, line 82
# [2666:2683:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
CHECK(old_virtual_memory_->Commit( reinterpret_cast<void*>(old_start_), (old_limit_ - old_start_) * kPointerSize, false)) failed
==== Stack trace is not available ==========================
==== Isolate for the thread is not initialized =============
[2666:2682:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[2666:2683:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[2666:2682:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[2666:2683:1108/223202:ERROR:file_stream_metrics.cc(37)] RecordFileError() error = 14 source = 2 record = 0
[11:11:1108/223202:FATAL:process_util_linux.cc(685)] Out of memory.
# Fatal error in v8/src/store-buffer.cc, line 98
# CHECK(virtual_memory_->Commit(reinterpret_cast<Address>(start_), kStoreBufferSize, false)) failed
==== Stack trace is not available ==========================
==== Isolate for the thread is not initialized =============
[2666:2692:1108/223210:ERROR:child_process_launcher.cc(283)] Failed to launch child process
~ % firefox
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
out of memory
~ % free -m
total used free shared buffers cached
Mem: 3923 1537 2385 0 74 865
-/+ buffers/cache: 598 3325
Also kile crashed a few times, so as gwenview.

[SOLVED] Broken setup after upgrading to 2.6.29

I am running a x86_64 system.
I have been running kernel26-2.6.28.7-2 for a while now. Upgrade to kernel26-2.6.28.8-1 caused some problem for me so I installed the older version from /var/cache/pacman/pkg/. After upgrading day before yesterday to 2.6.29.1, I can boot and login to the system but pretty much nothing works. The obvious problem that I can find out is that everyting is trying to load modules from 2.6.28-ARCH. After logging in even 'uname -r' reports 2.6.28-ARCH. I do have the /lib/modules/2.6.29-ARCH folder with all the modules.
Any help will be much appreciated. I can provide further information if required. Thank you.
Last edited by partha (2009-04-20 03:13:17)

I was able to solve it. The problem was I was using grub installed from Ubuntu. So, there was some problem loading the kernel. Installing grub from arch fixed it. Thanks.

[SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

Similar Messages

Maybe you are looking for