[solved] texlive problem - supertabular environment not recognized

Hey!
I want to use supertabular but actually it's not working… I cannot see why.
kpsewhich supertabular.sty
/usr/share/texmf-dist/tex/latex/supertabular/supertabular.sty
There shouldn't be problems with permissions also:
ls -la $(kpsewhich supertabular.sty)
-rw-r--r-- 1 root root 14K Jun 26 08:01 /usr/share/texmf-dist/tex/latex/supertabular/supertabular.sty
It should be installed inside of http://www.archlinux.org/packages/extra … atexextra/
pacman -Qs texlive-latexextra
local/texlive-latexextra 2012.26807-1 (texlive-most)
TeX Live - Large collection of add-on packages for LaTeX
So it is. I also ran
sudo texhash
several times but it's still not recognized. My LaTeX Editor is latexila from AUR if this somehow important.
Maybe someone have an idea? I'd love to hear some ideas on this since I'm confused all over…
Cheers!
Last edited by domac (2012-10-20 12:27:32)

Yes, for sure Trilby! Sorry, I don't know how to entitle this thread exactly since I don't get what goes wrong here…
Some sample file I tried to compile that failed @ line 11 where "supertabular" occurs:
http://sprunge.us/HGbH?latex
or
\documentclass[a4paper,11pt]{article}
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage{lmodern}
\title{foo}
\author{bar}
\begin{document}
\begin{supertabular}{rrrr}
1 & 1 & 1 & 1 \\
2 & 4 & 16 & 2 \\
3 & 9 & 81 & 6 \\
4 & 16 & 256 & 24 \\
\end{supertabular}
\end{document}
Any ideas?
EDIT: Totally forgot…
! LaTeX Error: Environment supertabular undefined.
See the LaTeX manual or LaTeX Companion for explanation.
Type H <return> for immediate help.
l.11 egin{supertabular}
{rrrr}
This is the most helpful error I get at the moment…
Oh shit… I found the error… missing usepackage… whoupadoup! xD
Sorry for that big trouble. Marked as solved.
Last edited by domac (2012-10-20 12:27:18)

Similar Messages

  • How to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    how to solve this problem? '' can not activate cellular data network failure'' authenticating PDP  from already thank you

    What does this have to do with using an iPhone in an enterprise environment?
    What carrier are you using and where did you get the phone?

  • When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync my ipod. Has anyone had a problem with itunes not recognizing an ipod?

    When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?

    Hi sarahdavis0_o,
    Welcome to the Apple Support Communities!
    If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Joe

  • My Arabic keyboard is missing letter it is different of my iPhone 3 and I pad how to solve the problem it is not only mine it is most of the iphone4

    My Arabic keyboard is missing letter it is different of my iPhone 3 and I pad how to solve the problem it is not only mine it is most of the iphone4

    Najsar wrote:
    My Arabic keyboard is missing letter
    No, it's not.  You get extra letters by holding down the existing keys and selecting them from the popup menu which appears.

  • Problems solved: Ipod touch 4th gen not recognized in itunes on windows 8 laptop

    Hi everyone,
    Since the latest update of itunes I have been having trouble trying to sync my ipod touch 16gb (4th gen) with my laptop which I recently updated to windows 8.1. For a week now I been hitting my head for updating both my laptop and the itunes as I can no longer sync with my laptop, and I didn't even know where to begin to solve this problem.
    I tried following all the instructions on the website to try and fix my problem so I got really frustrated and decided to delete all the apple softwares on my laptop. I decided to give it another try and download itunes over fresh and would you believe it... IT WORKED! Now my iPod is syncing again.
    So, guys if your still having this problem, then follow these steps
    1. Access control panel on laptop
    2. Click on programs > Uninstal programs
    3. Click on the following (5) applications and uninstall:
    Apple application support - Uninstall
    Apple mobile decive support - Uninstall
    Apple software update - uninstall
    Bonjour - uninstall
    itunes - intall
    5. Then access itunes and download itunes again and install
    It should work when you connect your ipod via cable.
    Hope this helps
    All the best guys!

    Yes that is a standard fix:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Why do I keep getting problems with Apple not recognizing my email password? This suddenly started and just reminds me of the mess that mobileme was. Calendar dev also is not working. What a complete mess!

    Can't access my email - endless messages saying password is wrong, which it is not. Mobileme all over again. I now need to forward all Apple mail to GMail, which is how an email system should work. Same is true with the calendar - a complete mess on the integration with my Google calendar.
    This is really, really a pain!!

    OK this is Cormacin Texas - these idiots have put me through the hoops, effectively locking me out of the support forum. Anyway I've solved the problem - it took 3.5 hours, involved a trip to the Genius bar at the local Apple store, and one and a half hours escalating through the dial-in help support - which was about the only thing the Genius was good for.
    What you need to know is:
    1. Apple are having problems with their servers, but have not published the fact - we've all wasted a lot of time because these guys want to keep their Customer Sat scores high, I guess. (I'm starting to feel like one of their Chinese factory workers!)
    2. This server problem is compounded by the fact that it only affects a few random servers
    3. It in turn can lead to problems sending emails which require you to change your Apple Mail password, and in my case surgically remove bad records for various hidden email and library folders. (Good luck with that!)
    So, a problem that they hide, a knock-on set of work that the problem indirectly causes, which they also hide, and a support structure that is geared for hardware, not the services that they are now selling.
    My suggestion is to change your mail password using the web (icloud.com) access to Mail and see if that works. After that, remove and reset up your Apple email (Preferences) and pray that you don't have to join endless telephone answering lines where some of the folks will cut you off because they can't be arsed.
    The two guys that finally helped me were brilliant, knew their stuff and could not have done a better job. The key guy was Danny - if you get him, your golden!

  • New USB Problems - USB Device Not Recognized

    I've had Ultimate x64 installed for awhile now.  It's gone through some growing pains (mostly NVIDIA-related BSOD issues) but it's usually pretty stable.  About a week ago it started having USB problems.
    I have a SanDisk ImageMate USB 2.0 card reader that suddenly stopped reading my camera media.  I also have an HP photosmart 7960 that stopped printing (I was using drivers for another printer, per instructions from HP, because this printer doesn't have Vista drivers).  My Memorex flash drive also no longer works, and it no longer sees my Garmin GPS.  They all say "USB Device Not Recognized".
    I contacted HP and they determined that my USB needed to be rebuilt.  This is what I did:
    Unplugged all USB devices.
    Removed all related USB software.
    Booted up in safe mode and went to Device Manager and uninstalled, in this order: USB root hubs, then USB host controllers.
    Even in safe mode, I couldn't get everything to stay deleted.  As soon as I deleted a USB host controller it would reinstall itself and install a root hub.
    I rebooted, and now I'm trying to install the SanDisk card reader.  It installs it, and then there is an exclamation point next to "USB Mass Storage Device" in Device Manager.  I've tried to update the driver (also by having it look in C:\Windows and all subfolders) and it says "Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run.  The problem code is 10."
    So I seem to be stuck with no USB.  I've been throwing new hardware at Vista, determined not to go back to XP.  However, I'm sure I can't work without USB.  What should I do at this point?
    Thanks!

    WHY hasn't anyone replied to this thread?  This is a huge issue, and I am certain millions are affected.  Glowball, did you find a solution.
    I have had major issues with my PC Card (PCIMIA SLOT) Adapter TYPE I & II Compact Flash Card Readers, which were plug and play in XP, give the same behavior - now you see it , now you don't!  None of the manufacturers were willing to provide any acknowledgement nor certify their devices for VISTA.  However, on the MS Support site I did find the attached instruction for a Reg Edit which allows the assignment of an IRQ to the PC Card Adapter in VISTA - apparently this was not required in XP (is this an advance in the OS??? I think not!).  IRQ 16 was assigned, and now works great on my Vista Home Premium laptop.
    On my other Vista Business laptop, I have a PC Express Cardslot - haven't tried an Adapter for SD + cards yet there, but supposed to not have the same issues, I believe.  However, I am having the same issue Glowball describes above with my USB  Card reader. It is USB 2.0 high speed certified and has been working great for Readyboost with an 8 GB SD card inserted and adding 4 GB of Readyboost "ram".  However, when I also inserted a CF card into the adjacent slot of the same card reader, it has become an "unrecognized device" as noted above.  Tried unplugging, replugging USB cable.  Although still displayed in My Computer and Explorer, the drive contents are not updated or active and cannot be opened - get "drive not present error" and the USB error noted above.
    I am unwilling to delete the USB drivers/device EVERY time I need to work with a CF card.  Surely there is a registry correction for this issue.  It must also tie into this IRQ issue noted with the PCIMIA card readers above as well?
    Anybody know or CARE?
    Mike Mulligan
    720-987-4470
    [email protected]

  • My Zen Micro Problem--USB Device Not Recogni

    I'm terribly terribly sorry if this question has already been answered, but I tried searching through the forums and found no solution to my problem. Although my Zen had worked fine for a few monthns (aside from the loose headphone jack grr), my computer recently doesn't recoginize it. When I plug it in, a yellow box that says "USB Device not Recognized" pops up. I tried plugging it in other slots but I still get the same message. I even tried it on another computer and it still wasn't recognized. I repeatedly unistalled/installed the software and drivers from both the cd and website. I also uninstalled the MTP but now I don't know how to install it again. I even reformated my Zen. Oh, and I'm using WinXP. Is there any hope for my Zen? Suggestions will be greatly appreciated.

    So you were on the v.2 firmware? And now you've switched to v. Or did I read that incorrectly?
    If it ceased to recognize your player using v.2, you might want to try uninstalling the player from your USB port (you can do this through the system manager). If you're receiving this error message using v., then try unistalling the player driver from the USB port (again, in system manager), restart your computer, then reinstall the driver. I've had to do that a few times for my digital camera. If that doesn't work, you might try contacting tech support.
    Good luck!

  • [solved] pacman mirrorlist "directive 'x' not recognized"

    I'm bungling through an install and tried using reflector to get speedier mirrors. Somehow I hosed myself, as when I checked mirrorlist it was blank(!), so I recopied the back-up to /etc/pacman.d/mirrorlist. Now when I run pacman -Syy I get:
    error: config file /etc/pacman.d/mirrolist, line 1: directive 'x' in repository section 'core' not recognized.
    The a line saying the same holds true for extra and community. Then it tries to sync servers and says: failed to update core (no servers configured for repository), and again for extra and community.  I tried to get openssh so I could go in remotely and copy the screen, but "no servers configured for repository." 
    Can anyone get me out of this can of worms?
    Last edited by pottzie (2011-06-17 23:58:40)

    x#Mirror used during installation
    Server = http:/mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
    (Which now that i look at I recognize as the server i chose for the installation!)
    Then, just the rest of the standard mirror list, and i uncommented the U.S. mirrors.

  • Problem with email not recognizing my id

    Have 4S iphone that all of a sudden my email is not recognizing my id or password even though is correct

    You might need to restart the Apple Mobile Device Service.
    Read this: http://support.apple.com/kb/TS1567

  • [Solved] After update, media keys not recognized.

    After I updated today, my play, stop, forward and back keys work, but not recognized in xbindkeys -mk. My vol up, down and mute do not work and are not recognized. I also cannot ctrl+alt+backspace to restart x.
    Last edited by haxit (2009-05-02 15:26:49)

    Acecero wrote:
    haxit wrote:I also cannot ctrl+alt+backspace to restart x.
    Add this
    Option "DontZap" "false"
    to the "ServerFlags" Section in the xorg.conf file.
    Zapping has been disabled by default with xorg-server 1.6
    Thanks a lot.

  • X58m and problem with eSata NOT recognized at all, even at bios post

    Hardware:
    i7 920 & msi x58m
    12 gb ocx platium tri channel DDR3 1333 (running at 1066)
    Sapphire 4890 Toxic 1 GB Ram Vapor Coooled Video
    Raid 0 Seagate 750 GB (two striped drives)
    CoolerMaster Gemini IIs Heat Pipe CPU cooler
    Bios flashed though MSI auto flash in windows mode (1.4?)
    issue: Thernaltake BlaqX Esata/USB docking station NOT recognized
    Windows 7 64 bit insalled perfectly.. programs installed perfectly
    I have two ways to connect to eSata
    1- rear eSata port that is already built onto the rear panel of board
    2- internal sata (front panel has cable running to 7th 'isolate' sata port)
    Docking station works perfect on my winXP machine
    Works perfect on my Dell notebook with Win 7 32 bit
    Docknig station works on ALL machines when using USB cable
    On boot post, msi x58m does not report the extra drive being present
    Help!

    Quote from: NovJoe on 20-July-09, 21:49:41
    Have you install all JMicron drivers (including RAID) for the board yet?
    Windows 7 handles these issues, because the device WORKS on my notebook that has windows 7 (32 bit). Mind you, I did a fresh install of windows on my notebook, so it wasn't Dell who installed those drivers for me.
    Also, the devices are NOT showing in the post screen at first boot -- again the jMicron suggestion is moot.

  • [SOLVED (mysteriously)] Arch on USB not recognized during boot

    Hi there,
    I hope, someone can help me with my problem, I have been searching and trying different things for quite some time now, without success.
    I treated myself a new Notebook, Acer Aspire S7 and wanted to run Arch on it. However I am new to Linux and want to try it out on an USB-Stick, to keep the factory install of Win8 intact. (Also, this notebook does not have such a great HDD capacity) Additionally I want to have full disk encryption.
    So I followed the Beginner's Guide with modifications described here and here
    When it came to install the bootloader I chose Grub for EFI.
    I then removed the USB-Stick with the live-Arch, which I used for installation and rebooted and it worked!
    However: As soon as I completely shut down and boot again, the USB-Stick with my installation is no longer recognized. If i boot the live-Arch again, reinstall Grub and then reboot, it again works.
    Here is something, I found strange. This is the output of efibootmgr:
    BootCurrent: 0000
    Timeout: 0 seconds
    BootOrder: 2001,0003,0002,2002,2003
    Boot0000* USB HDD: KingstonDataTraveler 2.0
    Boot0001* Intel HDD0
    Boot0002* Windows Boot Manager
    Boot0003* arch_grub
    Boot2001* EFI USB Device
    Boot2002* EFI DVD/CDROM
    Boot2003* EFI Network
    BootCurrent is 0000, but that number does not appear in the Boot-Order list. Could that be something?
    Well, I hope someone has an idea. I will happily share any information about my setup with you, just ask.
    Thanks,
    Max
    Last edited by MaxT (2014-04-07 08:35:20)

    Sorry for digging that threat up again. I just wanted to share with you the solution to the problem I was having. Perhaps it will save someone else some frustration.
    The Acer Aspire S7 has a dongle that goes in the display port and provides an ethernet and an VGA port. It was that dongle that prevented the USB stick with the Arch installation from being recognized. Done attached -> USB stick was ignored, dongle detached -> it worked.
    I have no idea, why that is the case, but maybe this info is helpful for someone.
    Cheers,
    Max

  • [Solved] E4200 - External hard drive not recognized

    My external hard drive, a 2TB WD Elements, does not appear in the storage list in the web utility of my E4200. The drive is formated as NTFS, single partition. It works fine if I connect it to a computer.
    If I connect a 4GB USB flash drive (FAT32) to the router, it does appear in the list.
    I'm using the latest firmware, version 1.0.02.
    Edit: Down(up?)grading to firmware version 1.0.01 fixed the problem.

    Carborundum wrote:
    Edit: Down(up?)grading to firmware version 1.0.01 fixed the problem.
    not surprised.  I was going to reccomend you dropped down too.   But I see you fixed it.  Kudos to you.   Im glad it works.   Lots of drives dont work with the E4200. 
    please fix the E4200 media server in .02 firmware

  • URGENT PROBLEM, sim card not recognized in 3gs

    I have a problem with my I-phone 3gs.When I bought the I -phone I was downloading skype and I couldnt as it was saying that I needed IOS 5.1 so I upgraded and then when I was trying to activate my phone it says it s not possible : as there is no connection to the server is temporarely unavailable. and then on I -tune says the no sim card is inserted. Anyone knows what to do ???? Thank you very much

    Have you double checked the SIM is inserted the right way?
    If that doesn't help, you might want to contact the seller for a replacement.

Maybe you are looking for

  • Backup 3 freezes at "Pending . . ."

    After using Backup 3.1.2 successfully for months, now when I try to back up Personal Data & Settings to my iDisk, the process appears to start, but never leaves a state that says "Pending. . ." Same issue if I try to back up Purchased Music to the iD

  • How do I re-install iTunes and/or clean the registry from past iTunes installation?

    I have downloaded iTunes in the past and then removed it with the appropriate Windows Add/Remove Programs feature.  Now, several months later, I cannot download iTunes much less install it.  Although the website assumes I have it and directs me to a

  • I cannot reinstall the Creative Cloud Desktop Application

    Yes, I have checked similar questions! I have a CC Photography plan and am running Windows 7 Home Premium 64bit. I wanted to update Lightroom to Lightroom CC from 5.71 but the Creative Cloud App failed to run. I attempted to reinstall it but it fails

  • No disc recognition

    I have a Pavillion a1710n.  When I place a disc from my Sony Handycam into the DVD drive, J, my computer does not recognize that there is a disc in the tray.  My video camera does not have any ports for me to hook up an USB cable to download the vide

  • Javascript injection in captivate??

    I have been trying to run this file on my machine but i think the javascript code is not getting executed on my browser. Does anyone know how to cope with it?