[Solved] There is a yellow triangle at the bottom of the screen with the message "error while signing in"
Firefox Sync has been working fine between my home computer, work computer and my Android phone but suddenly my home computer has recently stopped syncing. There is a yellow triangle at the bottom of the screen with the message "error while signing in". I have checked passwords and codes on all three devices and check the sync versions are the same. All where correct. I have reinstalled both firefox and sync. I have even tried setting up a new sync account with a different user name but still the same problem. My work computer and phone sync fine but my home computer gets the error. Does anyone have any idea what could be causing this. Any help would be greatly appreciated as this is driving me mad!
I have now discovered that if I manually disconnect (Tools / Sync / Disconnect) and then sync it works but only once. I seem to be able to repeat this manual process indefinitely. I thought that this might give a better mind than mine a clue.
Similar Messages
-
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
What to do?
Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
Thanks
VTry this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
hi, please help.
Accidentally deleted startupitems from library/startupitems on macbook now the computer wont startup and i get the grey startup loading screen with the apple symbol and a loading bar but wont load then turns off.
i saved these files to a folder on the destop and then turned the computer off. oops!!! now computer wont start up
How do i put the startupitems back to this folder or beter yet get into the computer to fix this.
Please please help!!!Reinstall OS X, either from disc or a recovery partition. You don't mention which version of OS X you're running so I don't know which it will be.
-
if anyone has ether had this happen to them can u tell me and if you no how to fix it please tell
Recovery Mode is how to start all over again on your iPad like new. It erases everything, even the operating system, and reloads directly from Apple. Once that is done, if you have performed a backup of your iPad in the past, you will be able to restore all of your configuration settings and preferences after the reload occurs.
To prepare for a recovery mode restore, have the following ready:
- Your computer (plugged in to power) ready with iTunes up and running
- Your iPad synch cable plugged into your computer but NOT your iPad
- Make sure your iPad is at least at 20% battery, preferably higher
NOTE: Do NOT touch the iPad once recovery begins. Make sure your computer doesn't suspend, sleep, or shut down while the process is going on.
Steps:
- Sitting next to your computer, take your iPad (which should NOT be connected to your PC) and hold down the sleep button (on the top of the iPad) and the home button (front of the iPad) at the same time
- After about 10-15 seconds, the unit will power off (do not do anything when the "slide to power off" screen appears, just keep holding the buttons)
- When the iPad turns back on, you will see the silver Apple appear on the screen. Continue holding down the home button but release the sleep button and immediatly plug the iPad into your computer running iTunes
- You should see a symbol appear on the iPad with a picture of a USB cable with an arrow pointing to the iTunes logo. iTunes will then say that it detected an iPad in recovery mode.
- Let iTunes restore the device. It will download a fresh copy of firmware, install it, and verify the SW.
NOTE: This may take a while. iTunes needs to download about 500MB from the Apple server, then it will start the loader on the iPad, and load the OS.
- After iTunes said that is successfully restored your device, you may get an error message saying the iPad isn't recognized and you're still at the screen with the USB cable and iTunes logo on the iPad. Don't sweat it. Unplug the iPad from the computer. Power off the iPad by holding the sleep button until you see the "slide to power off" - go ahead and slide to power off. Once it is shut down, push the sleep button again until it powers on.
- the iPad will come back to the familiar USB cable/iTunes logo. When it does, just plug it back into your computer and iTunes will activate the iPad.
- if you had previously backed up your iPad, iTunes will tell you there is a backup and ask if you would like it restored. If you wish to do this, accept the prompt. This will also take some time. Note it will NOT put your apps, music, movies, TV shows, etc back on your iPad, just your settings and preferences.
- once the restore is complete, iTunes should recognize your iPad and you can pick your synching options (apps, music, movies, etc, etc) and have a blast! The only thing I noticed it doesn't retain is the page layouts for your apps, so either screen capture them before you begin, or write it down.
I hope this helps -
How do I get the 7 files that are going to the trash and then canceled to complete one way or another.
This has nothing to do with the TB display. You should repost in the computer forum
-
the box is located under the icon line at the bottom of the screen and above the window tool bar/icon box ! its almost like im running in a wide screen mode ! i cant seem to find a way of making the screen deeper, so it fills all the available space ! its also . freezing and it messes with the add ons and the adobe plugins ! a real shame cause i think the new layout is great . kep up the good work
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Just updated to iOS7. Pulled-down new Notification screen and all it contains is a summary of my calendar for today and tomorrow.and stocks I want to be able to see the weather but it is not visible on this screen. Can't I do this anymore?
Check settings >> notification center >> today view
-
I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help
I cannot get my MacBook Air to move from the gray start up screen with the Apple logo and spinning gear. Please help
-
Is there any report to view" the blocked Vendor Invoices along with the Pay
Dear Gurus,
Is there any report to view" the blocked Vendor Invoices along with the Payment Date". Please Let me know.
BalajiI think you can solve this issue with a Query.
Fernando. -
YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.You will find that using the YouTube app will provide a better viewing experience for YouTube videos.
-
The AOL address I was using for my iTunes account has been deleted due to me not signing in for awhile and I'm afraid that I will lose all of my purchases made from my iphone when I sync it into iTunes for a much needed update and so that I can (hopefully) transfer its data to my new iPhone 4...
The only time I have synced my current iPhone was when I activated it but since then I have not been able to sync with my computer and now have a new one.
Sorry about the garbled way this is written but I desperately need help:
1, Is there a way of shifting purchases from one account to another with the same billing information?
Or
2, is there a way of recovering my old account and changing the details?
Any other help is greatly appreciated
ThomYou don't need to access your e-mail account, just get into your Apple account and change the e-mail address. If you can't access your Apple account, then you have a bigger issue to contend with.
-
In a Google search within a Firefox session, clicking on a search result causes the new page to open with the search terms highlighted in yellow -- how can I turn off this highlighting?
Try to clear the Google cookies and redo those Google options.
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies" -
I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.
I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help. -
I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You
I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.
Maybe you are looking for
-
Hi friends, I have a Idoc-XI-JDBC scenario. We need to send the same data to a 2nd JDBC server. So, that should be Idoc->XI-->JDBC1 ->JDBC2. Since the second server also needs the exact same fields as the first
-
PDF in AIR - read PDF scroll position? No events.
I'd like to capture scroll events when viewing a PDF file, and I can't figure out how to do it (or if it can be done). I have a pretty simple AIR application, where I'm trying to render PDF content in AIR. This includes: <mx:HTML id="myHTML" heigh
-
Hi All In my report the overall result row is displaying at the top of the report.In the result properies the result position is checked as below. I used a hierarchy in this query.Even I checked root/totals appear below in the Hierarchy attributes in
-
When we PDF our documents raster line art has cut lines around or beside them if you zoom in they go away and they also do not print. what is cause this. Our customer does not want to see them.
-
Af:validator fires all validation in a view
Hi, I have a transaction that span many pages using a process train and I also have defined entity validation rules. I want to validate input fields on my form using af:validator. However all validation rules in my entity are fired. How can I validat